products and services · 2016-10-31 · • monitoring and control functions: ac mains, rectifier,...

PRODUCTS ANDSERVICESat a glance

Experience the power.

„Precise knowledge of our clients‘ special requirements means most efficient support – rely on our power for your projects!“

CEO Volker Roßmann

Eltek Deutschland is a full-range provider

of protected power supplies for the telecom,

Data Center and OEM power industries as well

as industrial applications.

Over 130 years’ experience in electrical

engineering and power supply technology

are the reason for the success of our products.

Being part of the international Eltek Group

assures access to global resources, sales

and service channels as well as our leading

position in the market.

We support you with highly efficient

technologies, innovative solutions and

customised services

- flexibly and reliably.

MODULAR COMPONENTS

RECTIFIER

Micropack 48 V/250 W/5.2 AOption: 12 V/120 W/10 A; 24 V/240 W/10 A• Efficiency 93% (<at low voltage)• Convection cooled• Stand-alone installation on DIN-rail possible (adapter)• Alarm contact• Input voltage range 85-300 VAC / 85-300 VDC• Operating temperature -40° to +75°C (derating > +55°C)• Also designed as DC/DC converter

Flatpack S 48 V/1000 W/20.9 AOption: 24 V/1000 W/41.7 A; 24 V/1000 W SIL3• Efficiency > 95%• Temperature-controlled fan• Input voltage range 85-300 VAC / 85-250 VDC• Operating temperature -40° to +85°C (derating > +45°C)• Optional: SIL 3

Flatpack S 48 V/1800 W/37.5 A• Efficiency > 95%• Temperature-controlled fan• Input voltage range 85-300 VAC / 85-250 VDC• Operating temperature -40° to +85°C • Also designed as DC/DC converter

Flatpack2 48/2000 HE/41.7 A Option: 24 V/1800 W/75 A; 60 V/2000 W/33.3 A; 110 V/2000 W/18.5 A; 220 V/2000 W/9.2 A; 380 V/3000 W/10 A• Efficiency > 96% (power range 30% - 70% of the output)• Temperature-controlled fan• Input voltage range 85-300 VAC / 140-275 VDC• Operating temperature -40° to +75°C (derating > +45°C)• Compatible with Flatpack2 (48V/2000W)• Also designed as DC/DC converter

Flatpack2 48/3000 HE/62.5AOption: 110 V/2000 W HE 20A; 220 V/2000 W HE 10A • 48 V/3000 W• Efficiency > 95.5% (power range 25%–75% of the output)• Temperature-controlled fan• Input voltage range 85–300 VAC• Operating temperature -40° to +75°C (derating > +45°C)

Flatpack2 48/3000 HE Wind• 48 V/3000 W/max. 62.5 A• Efficiency 95%• Input voltage range 85-210 VAC / 85-300 VDC• Operating temperature -40°C to +75°C (derating > +45°C)• Separate subrack

The illustrations do not correspond to the actual sizes.

MODULAR COMPONENTS

INVERTER

Inverter INV 211/INV 222• Input voltage: 48 V/60 V/110 V/220 V• INV 211 AC output: 1.125 kVA; INV 222 output: 2.25 kVA• Optional 3 phase

Rectiverter 230 V/1500 VA /1200 WOptions: 230 V/1500 VA/150 W; 230 V/1500 VA/0W• Ideal solution for combined AC- and DC -applications• 3 - in - 1 functionality: - rectifier - inverter - automatic transfer switch

Flatpack S DC/DC 380 V/54 V 750 W HE• Input voltage range 200 - 400 VDC• Efficiency > 96% • Operating temperature -40° to +85°C• MTBF > 350 000 h

Flatpack2 DC/DC 18-75 V/24 V 1350 WOption: Flatpack 2 DC/DC 18-75 V/48 V 1350 W• Input voltage range 20 - 75 VDC• Efficiency > 91.7%• Operating temperature -40° bis +75°C• MTBF > 315 000 h

Flatpack2 DC/DC 42 - 75 V/380 V 1350 W• Input voltage range 42 - 75 VDC• Efficiency > 91.7%• Operating temperature -40° bis +75°C• MTBF > 315 000 h

Flatpack2 48/1500 HE SolarOption: Flatpack 2 24/1500 HE Solar• 48 V/1500 W/31.3 A• Efficiency > 96% (power range 30% - 80% of the output)• Temperature-controlled fan• Input voltage range 85-265 VDC• Operating temperature -40° to +75°C (derating > +55°C)• Mechanically compatible with Flatpack2

BI-DIRECTIONAL MODULE

DC/DC CONVERTER


MODULAR COMPONENTS


STATIC BYPASS SWITCH

Static bypass switch STS203/ STS207• 48 V / 60 V / 110 V / 220 V• Nominal switching capacity 3 kVA (STS203); 7 kVA (STS207)• SNMP interface and monitoring by Web-Browser included

Static bypass switch STS118• 24 V / 48 V / 60 V / 110 V /220 V• Nominal switching capacity 18 kVA• SNMP interface and monitoring by Web-Browser included

Flatpack2 60/2000 HE Solar• 60 V/2000 W/33.3 A• Input voltage range 85 - 300 VDC • Efficiency > 96.9% • Operating temperature 40° bis +85°C • MTBF > 350 000h• Temperatur-controlled fan

Flatpack2 48/3000 HE Wind• 48 V/3000 W/max. 62.5 A• Efficiency > 95%• Input voltage range 85 - 210 VAC / 85 - 300 VDC• Operating temperature -40° to +75°C (derating > +45°C)• Separate subrack

DC/DC CONVERTER

SYSTEM SOLUTIONS


• Optional for all Controller and CAN Nodes: external field bus-converter for Profibus, IEC 6185

CONTROLLER, CAN NODES

Compack• Functions cf. Smartpack, with Ethernet port• Display and control keys, without LCD, 3 x LED• Designed for compact systems of the type Micropack and Minipack 1U• Communication via WEB/SNMP, Power Suite

Smartpack• Optional: USB, RS-232, USB + Ethernet• User interface: 3 x LED, two-line LCD display + 3 keys• Monitoring and control functions: AC mains, rectifier, solar chargers, load, batteries, generating set, control system, inputs/outputs (alarm), Ethernet / WEB server / SNMP• Communication via WEB/SNMP, PowerSuite Smartpack S• Compact design: user-friendly display, simple control keys, Ethernet I/O connections• Communication via WEB/SNMP, PowerSuite, large memory for event log

Smartpack S Panel Mount• High resolution colour display• Easy navigation in user menu• Ethernet for remote monitoring• SNMP Protocol• 6 programmable outputs / inputs (analogue / digital)• Automatic battery monitoring and test• Comprehensive logging

Smartpack2 Option: Industrial Basic• Distributed control system: display and communication plus control unit and I/O unit• Advanced functions: large memory for event log, backup on SD card possible, 3 x low voltage disconnect• Communication WEB/SNMP, PowerSuite• Master module (can be installed separately on the door or on the remote control panel) colour TFT display, control keys, Ethernet port, SD card slot

UPC4• Extensive battery management • Freely programmable signaling concept• Communication via WEB/SNMP, MMT-Software• Modbus integrated

CAN NodesVarious CAN Nodes are available to expand the system monitoring according your needs• AC Mains Voltage, current, frequency and energy consumption• Alarm outputs and control inputs• Climate control of fan/filter cabinets• Generator control/fuel tank level measurements

SYSTEM SOLUTIONS

EMBEDDED-SYSTEMS

Modular systems MicropackThe Micropack power supply systems are designed for simple applications from a stand-alone rectifier module on a DIN rail through to systems with four rectifiers, battery and load breakers in addition to a control unit with monitoring via Ethernet port. The modular design permits installation on a DIN rail provided by the customer.

Flatpack S SystemsThe Flatpack S systems are characterised by their extremely compact dimensions and high efficiency.The systems are ideally suited for applications in confined spaces or in switch cabinets. The modular design offers optimum flexibility. In a 1U subrack (19“/250 mm), it is possible to accommodate a rectifier power of up to 3 kW, 3 options for consumer distribution, 2 battery disconnectors, battery low voltage disconnect plus an alarm and battery monitoring system.

Flatpack2 Systems - from compact to very largeFlatpack2 systems are suitable for a broad range of telecom applications. The systems feature an excellent modular design, which, thanks to the use of 2000/3000 W modules with a high efficiency and a cooling system, permit a power of up to 96 kW /144 kW in switch cabinets. In a 2U subrack (19“/380 mm), it is possible to accommodate a power of up to 8 kW, 6 load distributors with disconnectors, 2 battery disconnectors, 1 control unit, battery low voltage disconnect, load disconnection at low voltage and an alarm monitoring system.

Flatpack2 Integrated 19“ HE The integrated 19“ 2U power supply is built around the Flatpack2 rectifier and is designed for applications such as switchgear, telecom, emergency lighting and alarm systems.Its compact design and simple installation make it a powerful 19“ power supply package. The rectifier`s wide DC output range makes it suitable for paralleloperation with all types of stationary batteries, including lead acid, or nickel cadmium types.


SYSTEM SOLUTIONS

EMBEDDED-SYSTEMS

Hybrid solutionsThe Eltek hybrid solution for supplying power to stand-alone and grid-connected sites.The modular design means that the systems are scalable and can be optimally adapted to the specific requirements. The Eltek Smartpack2 Controller acts as a central control and monitoring unit for the entire system incl. remote access.The hybrid system integrates the grid, photovoltaics, wind power in addition to fuel cells and generators as power supply sources. The high availability and the high-efficiency technology of all the Eltek components guarantee a reduction in energy costs. The lower consumption of fossil fuels reduces CO² emissions and actively contributes towards the protection of the environment.

Rectiverter Power Core 6/kva 1phOption: 18 kVA 3ph MBA Rectiverter power system is an ideal solution for mixed AC and DC environ-ments, in any industry. It provides a new level of flexibility and lower total cost of ownership.The Rectiverter building block combines both AC and DC feed into one common unit. Simultaneously it provides AC backup power for 230 VAC or 115 VAC loads, and 48 VDC power for DC loads and battery charging. The modular and scalable Rectiverter system, including batteries, distribution and other system components, is controlled by a single Smartpack 2 or Smartpack S controller

Wallbox Micropack, Flatpack S, Flatpack 2Do you need amps, want to keep control, have only limited space?The extremely compact design, simple installation and the option for internal back up batteries make these systems a powerful wall mounted DC power supply package.Specially designed for Telecom and Industrial applications the wall box is available in several versions: Micropack (120 – 1000 W), Flatpack S (1000 – 1800W) or Flatpack 2 (1800 – 4000 W).

DC/AC Inverter systemsThe Industrial bulk feed (IBF) unit is designed for systems with48, 60, 110, 125 and 220 VDC input. The Power Core is built around the INV 222 inverters, and designed for all types of applications where an uninterruptable AC power supply is needed, such as switchgear, telecom, emergency lighting and alarm systems.


Stand-alone systems forIndoor and outdoor applicationsCabinet solutions for your indoor and outdoor applications:

• Space-saving• Weatherproof• incl. filter solution (standard) optional heat exchanger or air conditioner or hybrid

Inverters and storage solutions Highly efficient inverters and storage systems for your projects:

• Central inverters 20 to 500 kW• Storage solutions• Remote monitoring• PV-Converter• Wind-Converter• Energy management

UPS installationsAre you looking for customised solutions for optimum UPS protection? Choose from our broad product range:

• mono / parallel: 1 kVA ... several MVA• modular: 10 kVA ... several 100 kVA, hot swappable

STAND-ALONE SYSTEMS

RENEWABLE / HYBRID SYSTEMS

UPS-INSTALLATIONS

SYSTEM SOLUTIONS


CUSTOM OEM

We support you in the implementation

of your specific product requirement.

Trust in our expertise.

From the technical development to

the product design through to the

manufacturing of prototypes and

serial production, we offer a full-range

service.

SERVICES

Our customised services

guarantee the longevity and smooth

functioning of all Eltek products.

• Supporting expert team

• Hotline

• Installation and commissioning

• Technical Support

• Preventive maintenance

• Extended warranties

• Repair service

• Seminars and training courses

SERVICES

CONTACT

Headquarters Frankfurt:Eltek Deutschland GmbHFerdinand-Porsche-Straße 4560386 Frankfurt a.M. GermanyPhone: +49 69 420 02-0www.eltek.de

products and services · 2016-10-31 · • monitoring and control functions: ac mains, rectifier,...

Documents