products catalogue...dpg-formtittings will not be held liable for any damage resulting from the...
TRANSCRIPT
PRODUCTS CATALOGUE
02 9669 3449Unit 2, 2 Bronti Street,
Mascot NSW 2020
In desk modulesOn desk modules
Power Modules AccessoriesWiring Accessories
Monitor ArmsCable Management
CPU SupportsFloor boxes
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Contents
Ergonomic productsMonitor arms• TYPE F SPRING ASSISTED MONITOR ARMVISION ARM• LAPTOP SUPPORT• THIN CLIENT/SLIM CPU SUPPORT• POWER COLUMN• VISION FLAT SCREEN ARM
Sit to stand station
Cable management• SNAP UMBILICAL• LINK CABLE SPINE• SPIRAL CABLE SPINE• CABLEWAY CABLE SPINE• UNICON CABLE BASKET• WIRED CABLE BASKET• DESKTOP GROMMETS• TRUNKING, CLIPS & CLAMPS
CPU supports• LIFT• BUDGET• SNUG• CPU TROLLEY
Floor Boxes• POP-UP 2• POP-UP 3• POP-UP 16• POP-UP 26• HINGE-140• HINGE-145• HINGE-180/180AK• HINGE-250/250AK• HINGE-146• HINGE-302AL• WEATHERPROOF-127• SIGMA-160• SIGMA-130• PLASTIC-624• SLAB-93• SLAB-99• FLOOR DUCT
Introduction • About dpg-formfittings• Product custodianship policy
Power ModulesIn-desk modules• SLIDE• SWITCH• SENATE II• OMEGA II• AFFINITY• PORTHOLE IV• PORTHOLE III Wireless charger• PORTHOLE II
On-desk modules• PYRAMID• HARMONY II• FREEDOM• CONTOUR• USB CHARGING STATION• CLAREMONT• TYPE Z• ULTRA CHARGE
Power Module Accessories• SOCKETS OPTIONS• USB CHARGER• POWER MASTER MODULES• DIN RAIL MOUNTING CLIPS
Wiring Accessories• THERMAL OVERLOADS• CONNECTOR LEADS• STARTER SOCKETS• SPLITTERS• WALL STARTERSTECHNICAL ACCESSORIES• ANGLED DATA BEZEL• THICK TILE FRAME• THRU DESK ACCESS POINTMETAL PLATES• VERTICAL UNDERDESK MOUNTING PLATE• ANGLED UNDERDESK MOUNTING PLATE• HORIZONTAL UNDERDESK MOUNTING PLATE
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Introduction
About us
Over the past 13 years has transformed the way we i ntegrate power and t echnology w ith f urniture i n the commercial world. We are inspired every day by the genuine belief that we can change the world for better with improved ergonomics for
or where you need it most.
On our newly designed website:
as a local supplier and manufacturer. Over the past 18 months we have shipped a considerable amount of tooling from Asia to Australia: this gives us greater control of colours and leadtimes and also support other local businesses.
We can now quote “Made in Australia” to our award win-ning PYRAMID (Honorable M ention in t he International Design A wards 2016), as well as the new SNAP Umbilical. Additionally i s now exporting products to Europe and Asia.
Product custodianship policydpg-formfittings is proud to offer a product stewardship program for customers in Australia.
At dpg-formfittings we are committed to a ‘whole of life’ approact to our products which are returned to us at the end of their useful life. Products will not be sent ot landfill and will either be re-used or recycled.
Products will be accepted, at no cost to the customer (freight excluded) when returned to dpg-formfittings (or other nominated depot).
The product will be assessed for re-use, or disassembled and forwarded to a suitable recycling facility.
dpg-formfittings currently works in conjunction with local companies in NSW, who have been selected for their outstanding commitment to the environment and capacity to provide the required service.
02 9669 3449
In-Desk Modules
Unit 2, 2 Bronti Street, Mascot NSW 2020
IN-DESKMODULES
SLIDESWITCH
SENATE IIOMEGA II
AFFINITYPORTHOLE IVPORTHOLE IIIPORTHOLE II
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SLIDE : In-desk power/data/AV module
The SLIDE in-desk module has a unique sliding lid: this a llows all outlets to be covered when not in use, and all outlets accessible when the lid is slid open.
The SLIDE is a lso available with w ireless charging: s imply place your Q i com-patible phone on the pad to charge (no leads necessary).
Features:
• Smooth sliding lid operation• unit in work surface• Can be horizontally or vertically mounted•and provision for 2 data•
• Also available with 3 auto-switched sockets and dual data provision
Options available:
• HDMI• USB 3.0• Cat6 RJ45• Audio• Dual USB charger
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SLIDE : In-desk power/data/AV module
and provision for 2 data.
Product Ref. Description
SLIDE0202USB
Color
Silver
SLIDE0202USB-WIRELESS
SLIDE0202
SLIDE0302
Please Note : dpg-formtittings will not be held liable for any damage resulting from the normal use of these product.
cannot accept any responsability or liability for providing category 6 performance in products sup-
SLIDE0202USB/10A
SLIDE0202USB-WIRELESS/10A
SLIDE0202/10A
SLIDE0302/10A
with in/out couplers and provision for 2 data.
2 data.
2 data.
provision for 2 data.
with 3-pin plug and provision for 2 data.
data.
data.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SWITCH : In-desk power/data/AV moduleNEW
- Desk box lids slide onto chassis,- Soft close function (except lid 309)
- With or without cable management brush
aluminium black or silver with
SWITCH 001 Chassis
- Soft close aluminium construction lid & frame
silver version- Custom sizes available (minimum quantity 50)- Only uses SWITCH 003 Chassis below worksurface)
Size : 296 x 121 x 20mm
SWITCH 305/306/308/309/316
- Interchangeable lids with SWITCH 001 and SWITCH 003 Chassis- Frame slides onto SWITCH 001 Chassis without the use of tools
Size : 300 x 120 x 25mm
SWITCH 302SWITCH 003 Chassis
SWITCH 305 SWITCH 308
SWITCH 306/316 SWITCH 309
Our new SWITCH in-desk power/data/AV module has a unique
modular design allowing a range of different style lids to be used
with a standard size single chassis.
Laminate infill
SWITCH 303
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
Product Ref. Colors Description
BlackSilverWhite
SWITCH 302.BKSWITCH 302.SLSWITCH 302.WT
SWITCH 003SWITCH 001
Chassis box aluminium construction - can be used with all the lids except SWITCH 302 - 2 or 4 gang power plate - provision for 6 data/AV Outlets
Size : 282 x 110 x 110mm
Product Ref. Description
SWITCH 001
Chassis box aluminium construction - only used with SWITCH 302 - 2 or 4 gang power plate - provision for 6 data/AV Outlets
Size : 318 x 110 x 110mm
SWITCH 003
Use SWITCH 003 Chassis - Cut-out : Size: 286 x 109mm
In-desk lid (aluminium) & frame (ABS) - cable exit from each sideIn-desk lid (aluminium) & frame (ABS) - cable exit from each sideIn-desk lid (aluminium) & frame (ABS) - cable exit from each side
BlackSilverWhite
SWITCH 308.BKSWITCH 308.SLSWITCH 308.WT
In-desk lid & frame (ABS) - cable exit from 3 sidesIn-desk lid (aluminium) & frame (ABS) - cable exit from 3 sides
BlackSilverWhite
SWITCH 306.BK/SL/WTSWITCH 316.BK/SL/WT
In-desk lid (aluminium) & frame (ABS) - brush along cable exitIn-desk lid (aluminium) & frame (ABS) - brush along cable exitIn-desk lid (aluminium) & frame (ABS) - brush along cable exit
BlackSilverWhite
SWITCH 305.BKSWITCH 305.SLSWITCH 305.WT
In-desk pencil-box & mobile phone holder - lid & frame (ABS)In-desk pencil-box & mobile phone holder - lid & frame (ABS)In-desk pencil-box & mobile phone holder - lid & frame (ABS)
BlackSilverWhite
SWITCH 309.BKSWITCH 309.SLSWITCH 309.WT
Use SWITCH 001 or 003 Chassis - Cut-out : Size: 286 x 109mm
Use SWITCH 001 or 003 Chassis - Cut-out : Size: 286 x 109mm
Use SWITCH 001 or 003 Chassis - Cut-out : Size: 286 x 109mm
Use SWITCH 001 or 003 Chassis - Cut-out : Size: 286 x 109mm
SWITCH 303.LA In-desk lid & frame (aluminium) - brush along cable exit
Use SWITCH 001 or 003 Chassis - Cut-out : size: 286 x 109mm
SWITCH 303SWITCH 302 SWITCH 308 SWITCH 306/316 SWITCH 305 SWITCH 309
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SWITCH 302 - IN DESK MODULE
CUT-OUT FOR SURFACE MOUNT
296 mm121 mm
282 mm
110 mm
133 mm
285 mm +/- 0.5 mm/-0.0mm
111 mm +/- 0.5 mm/-0.0mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SWITCH 305 - IN DESK MODULE
CUT-OUT FOR SURFACE MOUNT
300 mm120 mm
283 mm
110 mm
134 mm
285 mm +/- 0.5 mm/-0.0mm
111 mm +/- 0.5 mm/-0.0mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SWITCH 306/316 - IN DESK MODULE
CUT-OUT FOR SURFACE MOUNT
300 mm120 mm
283 mm
110 mm
135 mm
285 mm +/- 0.5 mm/-0.0mm
111 mm +/- 0.5 mm/-0.0mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SWITCH 308 - IN DESK MODULE
CUT-OUT FOR SURFACE MOUNT
300 mm121 mm
283 mm
110 mm
134 mm
285 mm +/- 0.5 mm/-0.0mm
111 mm +/- 0.5 mm/-0.0mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SWITCH 309 - IN DESK MODULE
CUT-OUT FOR SURFACE MOUNT
300 mm119 mm
283 mm
110 mm
134 mm
285 mm +/- 0.5 mm/-0.0mm
111 mm +/- 0.5 mm/-0.0mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
SENATE II : New conference table box
NEW
Contact our sales team for more information
Our new conference table box, SENATE II offers functionality, convenience and provides flexibility for AV and power requirements.
All models have a dual opening lid with soft close function and are fitted with a brush dust seal.
Power, data and AV fittings can be supplied to customers configuration.
Power outlets are usually softwired with a male coupler, but can also be supplied wired to a thermal overload with 2m flex and 3-pin plug.
Data and AV connectors can be pre-fitted with 1.8 or 2m flylead (other lengths by request).
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
Product Ref. Colors Description
Options available:
• Autoswitched socket outlets• Cat6 RJ45• HDMI• USB 3.0• Dual USB charger• SVGA• DVI
All SENATE II conference boxes are available in a choice of standard colours: black, white or silver.
NOW AVAILABLEContact us for details
SENATE2-310.BK Black Dimensions: 310 x 148 x 148mm Cut-out: 301 x 139mm SENATE2-310.WT White Dimensions: 310 x 148 x 148mm Cut-out: 301 x 139mm SENATE2-310.SL Silver Dimensions: 310 x 148 x 148mm Cut-out: 301 x 139mm SENATE2-310.LA Laminate Infill Dimensions: 310 x 148 x 148mm Cut-out: 301 x 139mm
SENATE2-610.BK BlackSENATE2-610.WT WhiteSENATE2-610.SL SilverSENATE2-610.LA Laminate Infill
SENATE2-1175.BK BlackSENATE2-1175.WT WhiteSENATE2-1175.SL Silver
SENATE2-310.BK SENATE2-310.WT SENATE2-310.LASENATE2-310.SL
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
OMEGA II : New generation conference box
• Aluminium lids & ABS frame•data/AV connections• Chassis dimensions : 318 x 220 x 110mm (2xSWITCH003)
• Customizations available: - USB charging - HDMI - USB 3.0 - DVI - VGA - Cat6 RJ45
OMEGA2.BK OMEGA2.WT OMEGA2.SL
Product Ref. Colors Description
BlackWhiteSilver
OMEGA2-8.BK/WT/SL OMEGA2 with 2 x quad sockets outlets & provision for 12 data/AV outlets
OMEGA2 with 1 x quad & 1 x dual sockets outlets and provision for 12 data/AV outlets
OMEGA2 with 2 x dual sockets outlets and provision for 12 data/AV outlets
OMEGA2-6.BK/WT/SL
OMEGA2-4.BK/WT/SL
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
OMEGA II : New generation conference box
Features
• Dual inward opening lids • Easy access from both sides• Dual SWITCH 003 chassis standard• Offers maximum 8 power & 12 data/AV outlets• • Soft close mechanisms• Brush strips
The base of each chassis has 3 sliding support pannels for cable management.
Frame Size : 298 x 214 x 25mm Cut-out : 288 x 205mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
288 mm+/- 0.5 mm/-0.0mm
298 mm214 mm
205 mm +/- 0.5 mm/-0.0mm
25 mm
In-Desk Modules
OMEGA II - CONFERENCE BOXLID CUT-OUT SIZE
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
AFFINITY : In-desk power/data/AV module
Features:
• Light grey fascia surround• Anodised aluminium body• • Spring loaded buttons to hold the unit in open position• Cable exits under the unit• Recessed 10amp auto switched sockets•plug or soft-wired• Blanks can be supplied for AV connectors
Options available:
• HDMI• USB 3.0• Cat6 RJ45• VGA• RCA & Audio• Dual USB charger
AFFINITY offers the convenience of power and data at the desktop when you need it and an uncluttered work surface when you don’t.
It is a concealed unit that can function in the open or closed position.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
AFFINITY : In-desk power/data/AV module
2 auto switched 10amp power sockets, with 2m lead and 3-pin plug
Product Ref. Description
85AP02/10A
Color
Silver/Grey
3 auto switched 10amp power sockets, with 500mm lead and in/out couplers85AP03
4 auto switched 10amp power sockets, with 500mm lead and in/out couplers85AP04
2 auto switched 10amp power sockets, with 500mm lead with in/out couplers and provision for 2 data
85AU022
Please Note : dpg-formtittings will not be held liable for any damage resulting from the normal use of these product.
cannot accept any responsability or liability for providing category 6e performance in products e
4 auto switched 10amp power sockets, with 2m lead and 3-pin plug and provision for 2 data
85AU042/10A
Silver/Grey
Silver/Grey
Silver/Grey
Silver/Grey
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
PORTHOLE IV : In-desk power & USB charging PORTHOLE I V has been designed t o support a range of Australian sockets and comes complete with i ntegral 4amp USB power s upply, which i s capable of charging all leading mobile phones and tablets, is designed to share the power when two devices a re connected, but can deliver a maximum of 4amp to a single USB socket when only one device is connected.
Features:
• Available in black, white or grey• Compact dimensions, ideal for space-saving installations• 2 x USB charging sockets with i ntegrated power supply• Fitted with 10amp auto-switched socket (also available with 15amp and round-pin earth)• Available with Australian & international sockets• Power cables exit from the base of the unit and
and 3-pin plug••and 42mm• B lack modules a re supplied with b lack cables.White and g rey modules a re supplied with white cables.
Please Note : Other international socket options are available. Contact our sales team for more information.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
1 x 10amp auto-switched socket and 1 x 2 port 4amp USB charger. Black module with black surround
Product Ref. Description
90AP4USB/10A.BK
1 x 10amp auto-switched socket and 1 x 2 port 4amp USB charger. White module with white surround
90AP4USB/10A.WT
htiw eludom yerG .regrahc BSU pma4 trop 2 x 1 dna tekcos dehctiws-otua pma01 x 1grey surround
90AP4USB/10A.GY
PORTHOLE IV : In-desk power & USB charging
Ø95mm
60m
m
Ø103.5mm
16,5mm
14m
m 5,5mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
PORTHOLE III : Wireless charging module
Features:
• Wireless charging surface• Lips of the PortHole ensures that spillages cannot enter the module• Available in black, silver or white
Please Note : Your device must support wireless charging.
Compatible Devices:
iPad, i Phone5, IpodTouch, Nexus4, B lackberry Playbook, Blackberry C urve, Samsung G alaxy S3, Kindle HD, HTC Desire Z, HTC Desire HD...
Please note t hat this list represents a n on-exhaustive list of tested devices. If you intend to use this product with an untested device we strongly recommend that you request a sample module and test the device before placing an order.
PORTHOLE takes charging to the next level: witeless! It is iseal for adopting an 80mm cable hole.
Simply place your wireless induction charging compatible device on the charger. A beep will acknowledge the connection, LEDs will illuminate around the charger’s perimiter and charging will commence.
This wireless charger has an integral power supply so thereis no requirement for a separate device to power the module.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
PORTHOLE II : Power module With its i nnovative design, PortHole is i deal for adapting an existing 80mm cable hole to allow a single power socket and a choice of
Features:
• Available in three colours; b lack, white and grey. with a silver trim• Fits in to standard 80mm grommet hole•- 50mm• Available with a choice o f power i ncluding USB charging, data/media (USB data transfer, HDMI and 3.5mm Audio Mini Jack) and sockets giving excellent versatility for the user• Fully segregated power and data• Complies with charging standard (BS EN 62684) for data enabled mobile phones• Option for 2 independent USB charging ports
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
In-Desk Modules
ON-DESKMODULES
PYRAMIDHARMONY II
FREEDOMCONTOUR
USB CHARGING STATIONCLAREMONT
TYPE ZULTRA CHARGE
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
PYRAMID :
Features:
• Data and/or HDMI connection• 4 gang unit with a combination of power, data and USB charging available• Power/Data/AV segregation• QI standard wireless phone charging1
• Available in black, white, grey, red and blue2
Options available:
• HDMI• USB • Cat6 RJ45• VGA• RCA• USB charging
1
compatible phones.2 Custom colours available by request
Dimensions: 138 x 138mm
Product Ref. Colors Description
BlackWhiteSilverBlueRed
PYAMID.BKPYAMID.WTPYAMID.SLPYAMID.BLPYAMID.RD
Made in Australia
Pyramid gives the flexibility of a powerboard in a trendy practical package.
Pyramid can be supplied in two different ways:
- As a portable power and mobile charging station, using a standard flexible cable with 3-pin plug
- Secured through an 80mm grommet hole
Winning a finalist award of Good Design Australia Awards, and honorable mention in the
International Design Awards 2016
Mobile phone manufacturers such as Samsung, HTC, Nokia, Google, LG, Motorola, Sony offer wireless charging as standard, some models may require the addition of a receiver coil. Apple iPhones currently require to be fitted into a thin case to enable wireless charging.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
HARMONY II
Features:
• Newly designed end caps with no visible screws• Anodised aluminium extruded body• Fascias/End caps available in black, grey or white• Standard inner end caps. A lso available in lime green, orange or cyan• All standard options are supplied with a 500mm in/out softwiring connector•plug• I f 3 or m ore s ockets are required, a thermal overload must be incorporated• Larger spacing at rear of extrusion for easier data cable installation• Double end cap system allows for a greater choice of colour options• Completely customisable to each users
components available• Accept category 6 data•kit
Options available:
• HDMI• USB • Cat6 RJ45• VGA• RCA• USB charging
Lime Orange Cyan
Hamony II on-desk has been given a facelift to improve its appearance. A new double end cap now means that there are no visible screws creating a flawless look.
The inclusion of rear access data sockets also allows for greater flexibility achieved by the separate supply of data cable.
Harmony II is configured with segregated power & data/AV choices to suit different workstation requirements and can be fitted to the edge of the desk with C-clamps or adhesive kits, making it functional, tet non-intrusive to the working desk.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
HARMONY II
2 auto-switched 10amp sockets and 500mm lead with in/out couplers
Product Ref.1 Description
84.2AP02
2 auto-switched 10amp sockets, with 500mm lead w ith in/out couplers and provision for 2 data
84.2AU02
4 auto-switched 10amp sockets and 500mm lead with in/out couplers
84.2AP04
Please Note : 1
ordered separately.
with a price and a dispatch date.
dpg-formtittings will not be held liable for any damage resulting from the normal use of these product.
cannot accept any responsability or liability for providing category 6e performance in products e .
C-clamp white
Product Ref. Description
FDR-001.WT
440006
Fixing Kits
Fixing kits required (not included with module)
C-clamp Adhesive
4 auto-switched 10amp sockets, with 500mm lead w ith in/out couplers and provision for 4 data
84.2AU04
1
2
2
2
1
1
1
1
FDR-001.SL C-clamp silver
Adhesive
Fit desk thickness of 20-32mm - to tighten the clamp use thumb
Adhesive kit.The adhesive strips have been r igorously tested to ensure that they work on a variety of s urfaces. Please check f urniture p rovider a s to the suitability of t he
Uses
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
FREEDOMFREEDOM desk module o ffers versatility of mounting options: besides on desk, bracketing is available for underdesk, vertical and panel mounting.
& data/AV choices to suit different workstation
the desk w ith C-clamps o r adhesive k its, making it functional, yet non-intrusive to the working desk.
Features:
• Anodised aluminium extruded body• caps and facias• Fully segregated power & data• All standard options are supplied with a 500mm in/out softwiring connector• Choice of power & data connectors to most
• Accept category 6 data•by request.
Options available:
• HDMI• USB • Cat6 RJ45• VGA• RCA• USB charging
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
FREEDOM : On-desk module
2 auto-switched 10amp s ockets with 500mm cable with in/out couplers
Product Ref.1 Description
760AP02
4 auto-switched 10amp s ockets w ith 500mm cable with in/out couplers
760AP04
Please Note : 1
ordered separately.
with a price and a dispatch date.
dpg-formtittings will not be held liable for any damage resulting from the normal use of these product.
cannot accept any responsability or liability for providing category 5e performance in products e
C-clamp white
Product Ref. Description
FDR-001.WT
440006
Fixing Kits
Fixing kits required (not included with module)
C-Clamp Adhesive
2
2
1
1
FDR-001.SL C-clamp silver
Adhesive
Fit desk thickness of 20-32mm - to tighten the
Adhesive kit.The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check fur-
440004
440004
Uses
2 auto-switched 10amp s ockets with 500mm cable with in/out couplers and provision for 2 data
760AU022 1
4 auto-switched 10amp s ockets with 500mm cable with in/out couplers and provision for 4 data
760AU042 1
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
CONTOUR A desktop power & data module with curves in all the right places.
A stylish plastic/aluminium desk power module, CONTOUR has a modern, curved appearance displaying many design features, w ith the added
CONTOUR i s functional yet non-intrusive to the working desk.
Features:
• Standard unit available in white, black o r grey with option of cream or white ends and topsOther colours available on request, subject to minimum order quantity• A ll s tandard options are supplied with a 500mm in/out softwiring connector• Fully segregated power, voice & data• Choice of power & data connectors to most
• Accept category 6 data•
work surface
Options available:
• HDMI• USB • Cat6 RJ45• VGA• RCA• USB charging
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
CONTOUR : On-desk module
Please Note : 1
ordered separately.
with a price and a dispatch date.
dpg-formtittings will not be held liable for any damage resulting from the normal use of these product.
cannot accept any responsability or liability for providing category 6e performance in products e
C-clamp white
Product Ref. Description
FDR-001.WT
440006
Fixing Kits
FDR-001.SL C-clamp silver
Adhesive
We recommend using 2 x C-clamps for the CONTOUR moduleFit desk thickness of 20-32mm - to tighten the clamp use thumb
We recommend using 1 adhesive kit for the CONTOUR moduleThe adhesive strips have been r igorously tested to ensure that they work on a variety of s urfaces. Please check f urniture p rovider a s to the suitability of t he
Uses
2 auto-switched 10amp sockets with 500mm cable with in/out couplers
Product Ref.1 Description
87AP02
4 auto-switched 10amp sockets with 500mm cable with in/out couplers and provision for 4 data
87AU04
2 auto-switched 10amp sockets with 500mm cable with in/out couplers and provision for 2 data
84AU02
4 auto-switched 10amp sockets with 500mm cable with in/out couplers
87AP04
and provision for 2 data87AU02/10A
4 auto-switched 10amp sockets with 500mm cable with in/out couplers and provision for 2 data
87AU042
and provision for 2 data87AU042/10A
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
USB charging station A very practical multi-USB c harging unit idealy suited for use in breakout a reas and for Hotel «back of house c harging» o f mobiles and other communication devicesThe pictured USB charging station has 16 type «A» USB sockets, however this charging station can be supplied with double the quantity if necessary.
Features:
• Each USB socket is rated for 5vdc 2amp charging•
Options available:
• 8 Dual USB chargers• 12 Dual USB Chargers• 16 Dual USB Chargers
8 Dual USB chargers12 Dual USB chargers16 Dual USB chargers
Product Ref. Description
USB-Tower.WTUSB-Tower-12.WTUSB-Tower-16.WT
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
CLAREMONT
Features:
The Claremont above desk power and USB fast charger offers the flexibility of convenient access to two power outlets and a Type "A" 12watt charger and a Type "C" 18watt fast charger.
This stylish plastic above desk module was designed in Australia. The module is supplied with one "C" clamp for desk mounting .
• Fixed configuration; two autoswitched 10A socket outlets and dual USB charger (Type “A” and “C”)
• Available in white, black or grey. Other colours available on request, subjectto minimum order quantity
• Standard option is supplied with 500mm in/out softwiring connector
• Can be supplied with 2m flex and 3 pin plug
• No visible screws
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
CLAREMONT
On-Desk Modules
Claremont on-desk module c/w 2 autoswitched socket outlets, 500mm 20A flex with IN/OUT coupler and Type A and C fast charger (Type A socket 12w, Type C socket 18w)
Product Ref.1 Description
80AP02USB.WT
Claremont on-desk module c/w 2 autoswitched socketoutlets, 10A flex with 3 pin plug and Type A and C fast charger (Type A socket 12w, Type C socket 18w)
80AP02USB/10A.WT
Extended C-clamp white
Product Ref. Description
FDR-002.WT
Fixing Kits
Fixing kits supplied
C-Clamp
1
1
Fit desk thickness of 20-32mm - to tighten the clamp use thumb wheel fitted.
Uses
Please Note :
dpg-formfittings will not be held liable for any damage resulting from the normal use of these products.
Suffix code WT = White, BK = Black, GY = Grey
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
TYPE Z
Features:Options available:
• HDMI• USB 3.0 • Cat6 RJ45• VGA• RCA• USB charging
Type Z on-desk module is our latest low profile extrusion. This has a double end cap that means there are no visible screws creating a flawless look.
The inclusion of rear access data sockets also allows for greater flexibility achieved by the separate supply of data cable
Type Z is configured with segrated power and data/AV choices to suit different workstation requirements and can be fitted to the edge of the desk with C-clamps or adhesive kits, making it functional, yet non-intrusive to the working desk.
• Newly designed endcaps with no visible screws• Anodised aluminium extruded body• Fascias/endcaps available in black, grey and
white• Sockets also available in red, blue and green
(other colours be request)• All standard options are supplied with a 500mm
IN/OUT softwiring connector• Can be wired with a 10amp flex lead and 3-pin
plug• Completely customisable to each users
specifications with USB chargers and wide range of data and AV components available
• Accept enhanced category 6 data outlets• Fixing via standard C-clamps or adhesive fixing kit
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
TYPE Z: ON DESK MODULE
On-Desk Modules
Type Z desk module extrusion c/w 2 autoswitched socket outlets, 500mm 20A flex and dual USB 4A charger, white
Product Ref.1 Description
88AP02USB.WT
Type Z desk module extrusion c/w 2 autoswitched socket outlets, 500mm 20A flex and dual USB 4A charger, with provision for 2 data, white
88AU02USB.WT
C-clamp white
Product Ref. Description
FDR-001.WT
440006
Suffix Code WT = White, BK = Black, GY = Grey
Fixing Kits
Fixing kits required (not included with module)
C-Clamp Adhesive
2
2
1
1
FDR-001 C-clamp silver
Adhesive
Fit desk thickness of 20-32mm - to tightenthe clamp use thumb wheel fitted.
Uses
Type Z desk module extrusion c/w 4 autoswitched socket outlets, 500mm 20A flex and provison for 2 data, white
88AP042.WT 21
Type Z desk module extrusion c/w 4 autoswitched socket outlets, 500mm 20A flex and dual USB 4A charger, with provision for 2 data, white
88AU042USB.WT2 1
Please Note :1 These part numbers are for the module only and do not include any fixing clamps or adhesive pads, which must be ordered separately.
If you require any other configuration of power, data and voice, please contact our office and you will be provided with a price and dispatch date.
dpg-formfittings will not be held liable for any damage resulting from the normal use of these products.
dpg-formfittings cannot accept any responsibility or liability for providing category 6e performance in products supplied. We will however fit category 6e specification components where specified.
Adhesive kit. The adhesive strips have been rigorously tested to ensure that they work on a variety of surfaces. Please check furniture provider as to the suitability of the surface finish.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
On-Desk Modules
ULTRA CHARGE USB TYPE A AND C CHARGER
Features:
The type-C connection has three supply voltages available:
• 5 Volts x 3.0 Amps = 15 Watts• 9 Volts x 2.0 Amps = 18 Watts• 12 Volts x 1.5 Amps = 18 Watts
Ultra Charge USB A and USB C charger is the latest addition to the dpg-formfittings charging range .
This new unit offers the benefit of a USB type-A socket (maximum 2.4Amp) and USB type-C socket that adapts to the device that is plugged in .
When a smartphone or tablet is plugged into the Ultra Charge type-C socket, a "handshake" will be performed with the attached device and if the device is capable of 'fast charging' it will supply the device using a 12 Volt supply until the battery reaches 40/50%, then switch over to 9 Volts or 5 Volts supply, this is dictated by the device being charged .
• 1 x Adaptive USB Type-C Socket supporting "Fast Charge" devices
• 1 x 2.4Amp Type-A Socket• USB Type-A socket complies with BC1.2 and
Apple Protocol• USB Type-C socket complies with BC1.2, PD2.0
and Apple Protocol
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
ULTRA CHARGE USB TYPE A AND C CHARGER
Compliance:• USB Type-A socket complies with BC1.2 & Apple Protocol• USB Type-c socket complies with PD2.0, BC1.2 & Apple Protocol
Compatible Modules:
• Type Z
*Our ULTRA Type A and Type C USB charger can be specified in the following modules
• Harmony 2• Contour• Freedom• Claremont 2 gang above desk modual
The ULTRA USB Charger can also be plugged into our Power master 2, 4, 6 & 8 gang units
On-Desk Modules
Please Note :
dpg-formfittings will not be held liable for any damage resulting from the normal use of these products.
dpg-formfittings cannot accept any responsibility or liability for providing category 6e performance in products supplied. We will however fit category 6e specification components where specified.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
s
WIRINGPOWER MODULESACCESSORIES
SocketsSplitters
Metal platesWall startersUSB charger
Power masters
Angled data bezelThermal overloadsConnector leadsThick tile frameStarters sockets
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Power modules accessories
Power modules accessoriesSockets Options
BS socket
Australian socket
US socket FR/Belgian socket
Germansocket
Italiansocket
Swisssocket
USB charger :• 2 Amp USB Charger• 4 Amp USB Charger
Data sockets :• RJ11• RJ45 (Cat6)• USB 3.0• Coaxial•• XLR
Audio & Visual :• HDMI• VGA• 3.5mm Audio• 3 phono• S video
Switched 10 amp with neon• These switched socket
modules.
Thailandsocket
• Standard 10 Amp• Round Pin earth• Coloured socketsRedBlueGreenBlackGreyWhite
• Standard UK 45 & 90º
• Standard UK fused 45 & 90º (3, 15A & 5A)
• T-earth 90º
• T-earth 90º fused (3, 15A & 5A)
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Power modules accessories
Power modules accessoriesUSB charger (2 port up to 4amp)
Features
• Complies with t he l atest charging standard: BS E N 62684:2010
(EPS) for use with data-enabled mobile telephones• Dual port USB charger capable of charging a wide range of devices including the simultaneous charging of 2 Apple devices• 2 independent USB charging ports, w hich can b e used a t the same time• Powered from adjacent power socket so no additional wiring is required• Compatible with our full range of in-desk & on-desk modules
Power mastersPower masters modules dual or quad auto switched 10amp socket outlet• Available in black, white, silver or red• Non removable integral retention clip• 20amp rated coupler connection system• Slimline modules for under desk, duct, screen or din rail mounting• Tool-less mounting into sheet metal or aluminium up to 2mm thick• Can be mounted in/on duct lid, in beam, basket, din rail or screen• Modules also available as 6 or 8 gang • Screen tile frame available for panel thickness between 6-14mm (no tools
Power master dual auto switched 10amp socket outletPower master quad auto switched 10amp socket outlet
Product Ref. Description
PM02.BK/WT/SL/RDPM04.BK/WT/SL/RD
Colors
BlackWhiteSilverRed
Din rail mounting clips for power masters modules
• Two din rail clips required for PM02 or PM04••
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Wiring accessories
Wiring accessories
Connectors leadsConnector system for use with power modules, giving quick and simple installation• Connectors available in increments of 500mm• Available in black or white•• Red or blue couplers also available
500mm1000mm1500mm2000mm
Product Ref.L ength
cl.0500cl.1000cl.1500cl.2000
Colors
BlackWhite
Starters socketsStarter socket 20amp with 500mm or 4m cable• Available in black or white
SplittersSoft-wiring splitter unit : 1 input/2 ouputs• Available in black or white
Product Ref.
SPLIT 1/2.BKSPLIT 1/2.WTSPLIT 1/2.WT-1500
Thermal overloads
required when powering 3 or more socket outlets• Available in black or white• Other cable lengths available by request
Product Ref.
CAB10ATHERMCAB10ATHERM.WT
Colors
BlackWhite
500mm500mm4000mm4000mm
Product Ref.L ength
SS05.BKSS05.WTSS40.BKSS40.WT
Colors
BlackWhite
Description
Splitter 1 input/2 outputs, blackSplitter 1 input/2 outputs, whiteSplitter 1 input/2 outputs, with 1500mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Wiring accessories
Wiring accessories
Thru Desk Access PointThru Desk Access Point allows you to access easily your cable and your sockets through your desk. • Available in black, white or silver
Thru Desk Access Point
Product Ref. Description
DPG805.BL/WT/SL
Colors
BlackWhiteSilver
Wall startersThe w all starter and starter sockets are the connecting devices m ost
the building.Wall starters are generally positioned in the same location as you might use a conventional power outlet, except in this case they are a dedicated latching 20A socket and are at the commencement of the softwired circuitry.
Product Ref.
WSE.BKWSE.WTWSE.RDWSE.BL
Colors
BlackWhiteRedBlue
Technical accessories
Angled data bezel
Angled data bezel f or u se w hen Cat6 bend radius i s critical.
Product Ref.
FRAME02. BK/SL/WTFRAME04. BK/SL/WTFRDATA04. BK/SL/WT
Colors
Black/Silver/WhiteBlack/Silver/WhiteBlack/Silver/White
Thick tile frame
screen tile system with a thickness between 6mm and 14mm. (no tools required). Ratched clamps supplied.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Wiring accessories
Wiring accessories
Metal platesLong metal underdesk mounting plate complete with 2 or 4 autoswitched socket outlets and provision for up to 3 data.• Available in white and silver
Vertical underdesk mounting plateComplete with 2 or 4 autoswitched socket outlets and provision for up to 4 data.• Available in white and silver
Metal angled underdesk mounting plateMetal angled underdesk mounting plate for 2 or 4 socket outletsMetal angled underdesk mounting plate for up to 4 data
Mounting plate quad auto switched s ocket outlets, provision for up to 3 data
Mounting plate dual auto switched s ocket outlets, provision for up to 3 data
Product Ref. Description
B4PWR3D.WT/SL
Colors
WhiteSilver
Mounting plate 4 autoswitched socket outlet & provision for 2 data
Product Ref. Description
F34PWR2D.WT/SL
Colors
WhiteSilverF34PWR3D.WT/SL
F34PWR4D.WT/SL
Mounting plate 4 autoswitched socket outlet & provision for 3 data
Mounting plate 4 autoswitched socket outlet & provision for 4 data
Metal angled underdesk mounting plate for 2 or 4 socket outlets (socket outlets not included)
Product Ref. Description
ANGPMPLT
Colors
WhiteSilver
ANGDATAPLT Metal angled underdesk m ounting plate for up to 4 data (data bezels not included)
B2PWR3D.WT/SL
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Monitor Arms
TYPE F : Spring assisted monitor arm
This stylish monitor arm, a rguably is one of t he slimmest of its type on the market today.
The TYPE F i s available in black, white o r grey, and comes complete with quick release VESA.
The a rm tension can be adjusted quickly using a simple Allen key to support monitors ranging between 2kgs and 5kgs, which covers most popular brands.
Features:
• Supports monitors f rom 2 to 5 .5kgs (5.5kgs + 5.5kgs for the Type «F» dual monitor arm) • I ntegral spring counterbalance t he weight o f
desired position • Fixing kits: C-clamp or bolt-through desk • Supplied with s tandard quick r elease VESA mounting • I ncludes cable management c lips to secure cables to upper and lower arm section
Options available:
• Single arm• Dual arms• Available in white, black or grey• Laptop support• Tablet support• 3-8 kgs support range
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Monitor Arms
TYPE F : Spring assisted monitor arm
Type F single monitor arm in whiteType F single monitor arm in blackType F single monitor arm in grey
Product Ref. Description
DPGF01.WTDPGF01.BKDPGF01.GY
Colors
WhiteBlackGrey
Single Arm
Dual Arm
Type F single monitor arm in whiteType F single monitor arm in blackType F single monitor arm in grey
Product Ref. Description
DPGF05.WTDPGF05.BKDPGF05.GY
Colors
WhiteBlackGrey
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Monitor Arms
VISION: Laptop support
Used in conjunction with the VISION pole arm, the laptop holder can be positioned to the side or rotated around the pole and height can be adjusted with a simple release mechanism.
Features:
• Laptop holder will hold up to 8 kg• T ray features a non-slip surface w ith adjustable platforms for wider laptops• 360° rotation around the VISION pole arm• 330 mm height adjustment range• 90° pan adjustment• 40° tilt adjustment range•by placing notebook’s screen alongside LCD
Options available:
• Available in silver or white
Single VISION pole arm and laptop support with clamp or bolt-through mounting
Product Ref.D escription
68S014.WT68S014
Colors
WhiteSilver
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Monitor Arms
Thin client & slim CPU supportUsed in conjunction with the VISION pole arm, the thin client holder can support a variety of thin client size.
Desktop real estate is a t a premium so having the ability to move the thin client/slim CPU support up off the desk and out
Options available:
• Available in silver• Vision pole is sold separately
Thin client - Slim CPU support
Product Ref. Description
68S040
Features:
• Thin client adjustable width 35-60mm• Slim PC adjustment 60-110mm•bought together for new installations• Fully adjustable and can accomodate a wide range of thin client sizes• Vertical adjustable strap
Power columnUsed in conjunction with the VISION pole arm, the Power column uses our standard FREEDOM extrusion in a vertical format.
Features:
• Easy to install • Can b e supplied with softwiring
3-pin plug• Natural anodised extrusion body• Supplied with 2 auto switched 10 amp socket outlets and a dual USB charger
Options available:
• Available in white, grey or black
2 auto-switched 10amp sockets & dual usb charger with 20amp 500mm cable and in/out couplers
Product Ref. Description
PCAP02USB
PCAP02USB/10A 2 auto-switched 10amp sockets & dual usb charger with 10amp 2000mm lead and 3-pin plug
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
330mm o f
• Ergonomic articulated flat screen monitor arm• Desk clamp standard fitting• Supplied with standard 75mm/100mm VESA mounting• Each single arm can support monitors up to 15 kg• Touch screen stable• Cable managed• Fully adjustable single pole artm with C-clamp desk
fixing or through desk• Available in black, white or silver• 500mm post
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Post Options
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Ergonomic products
SIT-TO-STAND workstation
Features:
• Easy to install• Can be supplied with monitor arm• Gas lift handle for both left and right handed users• Very study material• Small footprint• Maximum weight 10 - 20 kg (single/dual screen)
Options available:
• Available in black or white• Single screen overview• Dual screen overview
Product Ref.
QUICKSHIFT
Sit-to-stand 10 kg limit
Dimensions
Height range/worksurface: 155 - 565mmHeight range/keyboard tray: 18 - 441mmWorksurface: 600 x 400mmKeyboard tray: 680 x 250mm
Product Ref.
MAXISHIFT
Sit-to-stand 20 kg limit
Dimensions
Height range/worksurface: 157 - 565mmHeight range/keyboard tray: 18 - 410mmWorksurface: 900 x 480mmKeyboard tray: 680 x 250mm
The Sit-to-stand workstation provides an affordable solution to suit any office.
With a small footprint, gas assisted height adjustment and ability to upgrade to dual screen, the unit will assist any work teamwith increased productivity, energy levels and overall mental and physical fitness, all within an affordable budget.
Sit-to-stand workstation offers a cost effective and efficient way to increase the health of the user as well as productivity at work.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
SNAP umbilical
Features:
• Round design for use with standard 80 mm grommet• Fully segregated 2 compartments when clipped together• Customizable length with its ‘clip together’ segments• Stainless steel support hanging wire•• Steel weighted foot• Up to 30 cat-6 data cables
Options available:
• Available in black, white, silver, translucent, smokey grey(others colours available upon request)
Umbilical cable reticulationOther lengths available. Contact us for more information
Product Ref. Description
UMB20UMB30UMB40UMB50CEILGROM111001DSKGROM
Length
2000mm3000mm4000mm5000mm
Ceiling grommet
Ceiling grommetSteel foot (silver/white/black)80mm desk grommet (white/black)
Floor to desk SNAP umbilical(c/w a w eighted m etal f oot &
Product Ref. Description
660042
Length
780mm
Made in Australia
The SNAP umbilical gives excellent cable management reticulation from floor to sedk, ceiling to desk or ceiling to floor. It offers exceptionally quick and easy installation plus a large cable carrying capacity and a good aesthetic appearance.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
LINK cable spine LINK is a unique cable management ideal for use with height adjustable workstations.
etelpmoc semoc ti ,shtgnel suoirav ni elbaliavAwith top and bottom mounting plates.
into the compartments.LINK o ffers g ood mechanical protection and strain relief.
Features:
• Four compartments structure to a llow power a nd data segregation• Segments detachable if required• 900mm, 1200mm o r 1300mm s tandard lengths for adjustable height workstations •
Options available:
• Available in black, white, translucentothers colours available upon request
Product Ref.
LINK.WT/BK/TRLINK900.WT/BK/TRLINK1200.WT/BK/TRLINK.TOPLINK.BOTTOMLINK-FOOT.WT/BK/TR
Colors
WhiteBlackTranslucent
720mm long900mm long1200mm long
Weighted foot
Description
Fixing brackets
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
SPIRAL cable spine offers exceptionnaly quick and e asy installation plus a large cable carrying capacity and a good esthetic appereance.
Features:
• Spring like expansion from 150mm to 1300mm working length means SPIRAL is suitable for various desk set-ups, including sit-to-stand workstation• Cables can be simply fed through the spine in its compressed state•locating the top of the spine under the desk• Weighted "horseshoe" style base with cable exit cut out• Large capacity t o accomodate a number o f different sized cables• Diameter 69mm•conduit• Product weight 1kg
Options available:
• Available in black, white or silver
Spiral cable spine in whiteSpiral cable spine in blackSpiral cable spine in silver
Product Ref. Description
660133660132660130
Colors
WhiteBlackSilver
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
CABLEWAY cable spine
Features:
• Available in silver or white• Two compartments to allow for power and data cable segregation• The Vertical Cableway screws to underside of the desk
•• The Horizontal Cableway screws to the underside of
• Allows conduit up to 25mm diameter to be swiped in•
Options available (upon request)
Vertical Cableway weighted base to desk including top bracket Approx height: 780mm
Product Ref. Description
660181660042
Cableway segment
Horizontal Cableway
Vertical Cableway
Extended Cableway
Horizontal Cableway (Approx length: 620mm)
Extended Cableway weighted base to desk including top bracket (approx length: 1340mm)
Colors
WhiteSilver
Horizontal Cableway Approx height: 620mm
660050660182
SilverWhite
Extended Cableway Approx height: 1340mm
660046660183
SilverWhite
An attractive and practical method of cable containment, the CABLEWAY routes cables from floor to desk and provided mechanical protection and strain relief.
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
UNICON cable basket
transportation and space saving.
Features:
Options available:
• Available in white or silver
Supplied with:
•or 85mm drop)• 500mm kit is supplied with dual data bezel• All the other kits are supplied with quad data bezel• Supplied in 500mm lengths that clip together to give desired length (500 - 1000 - 1500mm etc.)
500mm kit: 1 x 500mm basket - 2 hanging brackets - 2 supports straps - 1 segregation barrier - 1 dual data bezel
Product Ref. Description
65AU005W65AU005S
Colors
WhiteSilver
UNICON Kits
1000mm kit: 2 x 500mm baskets - 2 hanging brackets - 2 supports straps - 2 segregation barriers - 2 dual data bezels
65AU006W65AU006S
WhiteSilver
1500mm kit: 3 x 500mm baskets - 3 hanging brackets - 3 supports straps - 3 segregation barriers - 2 dual data bezels
65AU007W65AU007S
WhiteSilver
2000mm kit: 4 x 500mm baskets - 4 hanging brackets - 4 supports straps - 4 segregation barriers - 2 dual data bezels
65AU008W65AU008S
WhiteSilver
• Flat pack construction
• Sides ford up and lock into place, using a unique living hinge design
• Easily transportable - allows up to 1800 unit per pallet
• Store large numbers in installation on various floor levels
• Made from polypropelene (recyclable up to 50 times)
• One basket can be user on back to back workstations bt adding additional segregation barrier and dual data bezels
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
UNICON cable basket
Unicon hanging bracketUnicon hanging bracket
Product Ref. Description
24A0263W24A0263S
Colors
WhiteSilver
UNICON hanging bracket
Unicon support strapUnicon support strap
Product Ref. Description
24A0264W24A0264S
Colors
WhiteSilver
UNICON support strap
Unicon segregation barrierUnicon segregation barrier
Product Ref. Description
24A0265W24A0265S
Colors
WhiteSilver
UNICON segregation barrier
Segregation barrier
Support strap
hanging bracket
Cable basket - 500mm lengthCable basket - 500mm length
Product Ref. Description
65A00117W65A00117S
Colors
WhiteSilver
UNICON Cable basket
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
WIRED CABLE BASKET
Features:
• Metal wire cable basket 2 tiers (screws not included)
953mm long, 2 tiers1153mm long, 2 tiers1553mm long, 2 tiers1853mm long, 2 tiers
Product Ref. Description
CB09532TCB11532TCB15532TCB18532T
WIRED baskets
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
Desktop GrommetsDesktop grommets are an easy way to manage cable on your desk. They contribute to create a nice and c lean work environment, so you can concentrate on your tasks.
Grommets help you making life in a busy
esthetically pleasing.
High tech desk grommet
• A high quality cast aluminium desk grommet• Brush strip on cable entry port• The unit features a twist lock action to retain the lid•• Minimum work surface thickness is 22mm
80mm plastic desk grommet80mm plastic desk grommet
Product Ref. Description
DSKGROM.WTDSKGROM.BK
Colors
WhiteBlack
Plastic desk grommet
• A high quality plastic desk grommet•• Minimum work surface thickness is 22mm • Has a removable slide that can be stored in a recess under the cover plate• The cover is also removable to allow the introduction of
• High impact polystyrene•
80mm high tech desk grommet
Product Ref. Description
520114
Colors
Silver
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Cable management
Trunking & Clips
Hi-tech Trunking• Solves the problem of untidy cabling • Three separate channels for power telecom and data segregation• Two piece swipe through T-shaped strips for addition or removal of cables • Cutting service is available for non-standard lengths• Self-adhesive backing strip• Can be drilled and screw mounted• Colour black
Flexible Cable Trunking• Simple means of keepint cables tidy• Suitable for use on furniture, control gear and enclosures• Available in three sizes• Supplied in 500 mm lengths• Slip ring for quick addition or removal of cables• Self-adhesive backing strip• Colour white
1000mm1500mm2000mm
Product Ref.L ength
650007650013650016
Colors
Black
Cable Clip• Handy clip providing a simple method of holding cables•• Colour grey
40mm50mm
Product Ref.D iameter
650035650036
Colors
GreyWhite
25mm (W) x 30mm (H)
Product Ref. Dimensions
650001
Colors
Grey
20 mm 30 mm 40 mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
CPU support
LIFTesthetics and compact features, the LIFT CPU support offers a simple yet robust solution for keeping the CPU out of the way and free from damage.
Poised under the desk, L IFT improves t he C PU performance by providing proper ventilation and a llowing hardware to
where dust accumulates and valuable computer equipment could be kicked or damaged by a vacuum cleaner.
Made from h igh quality aluminium for improved lifetime longevity, a simple handle adjustment a llows for height or
Features:
• Simple install with free handle adjustment to width and spring adjustement to height• A luminium body c lamps tightly o n the top and bottom of CPU to secure your CPU• Full 360° rotation and 250mm slide plate• CPU support weights up to 8 kg - subject to desk material
Options available:
• Available in silver, silver & white or silver & black• Dimensions range : 280mm - 380mm (H) x 55mm - 125mm (W)
Lift CPU support in silver & whiteLift CPU support in silver & blackLift CPU support in silver
Product Ref. Description
58K060W58K060BK58K060S
Colors
WhiteBlackSilver
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
CPU support
BUDGETCPU support offers a simple yet robust solution for keeping the CPU out of the way and free from damage.
BUDGET is a strong and versatile CPU holder that is capable of supporting a range of CPU sizes. Offering many of the
a lockable option to protect the CPU from theft in public and easy accessible areas.
Features:
• Adjustable support platform t o accomodate extensive CPU sizes• Supports CPU weights up to 15 kg - subject to desk material• Comes complete with a slide and rotate mechanism
Options available:
• Dimensions range : 380mm - 580mm (H) x 50mm - 275mm (W)
Budget CPU support in silverBudget CPU support in black
Product Ref. Description
58K03958K039.BK
Colors
SilverBlack
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
CPU support
SNUGSNUG is a simple and stylish CPU support that enhances the esthetics of any workspace environment and allows easy access to the front and back of the CPU
Poised under the desk, SNUG improves the CPU performance by p roviding p roper ventilation and a llowing hardware t o
where dust accumulates and valuable computer equipment could be kicked or damaged by a vacuum cleaner.
SNUG C PU support gets its s trength from a metal structure
The CPU is secured in place by a heavy duty nylon strap and clip.
Features:
• Slim and stylish design• Simple to install•smart esthetic look• Extender p late i ncluded a s standard for wider CPUs• C PU sits o n a metal p latform and i s secured i n place with a strap• Load tested by FIRA• Supports CPU weights up to 10 kg - subject to desk material• Variable height adjustment
Options available:
• Available in silver or black• Dimensions range : 275mm - 420mm (H) x 96mm - 190mm (W)• Slide mechanism to allow movement
Snug adjustable CPU support
Product Ref. Description
58A12258A109
Colors
WhiteBlack
Slide & rotate allows movement of the SNUG CPU holder. Slide mechanism requires a m inimum desk width of 700mm (Track length 407mm).
Product Ref. Description
58A049
Slide & rotate mechanism
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
CPU support
CPU TrolleyThe CPU T rolley is the perfect option when mounting the CPU is not an option. It allows easy access to the front and back of the CPU.
Poised under t he desk, C PU Trolley improves the CPU performance by providing proper ventilation and allowing hardware to stay cool, promoting a longer life for CPUs to
computer equipment could be damaged.
Features:
• Witdh adjustable from 130 - 230mm•• Supports CPU weights up to 10 kglocking feature to stop any unwanted movement• Suitable for larger CPUs
Options available:
• Non-standard variations of this p roduct are available upon request
CPU Trolley
Product Ref. Description
5202211
Colors
Grey
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Pop-up 2Features:
• Pop-up mechanism has soft opening• Supplied with a blank lid for concrete pour•• Knockouts in each side of the basebox and in the base for conduit entry• 3 half tiles available (maximum 1 socket outlet) and one half tile available for AV/data• Supplied with a blank lid for concrete pour• Brass or stainless steel lid available
120 x 120mm120 x 120mm
Product Ref.L id Size
DPG-ZN-2DPG-ZN-2P
Pop-up 2 BrassPop-up 2 Stainless steel
Description
Chassis Size : 100 x 100 x 60mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Pop-up 3Features:
• Pop-up mechanism has soft opening• Supplied with a blank lid for concrete pour•• Knockouts in each side of the basebox and in the base for conduit entry• 3 half tiles available (maximum 1 socket outlet) and one half tile available for AV/data• Supplied with a blank lid for concrete pour• Brass or stainless steel lid available
150 x 150mm150 x 150mm
Product Ref.L id Size
DPG-ZN-3DPG-ZN-3P
Pop-up 3 BrassPop-up 3 Stainless steel
Description
Chassis Size : 100 x 100 x 60mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Pop-up 16Features:
• Pop-up mechanism has soft opening• Supplied with a blank lid for concrete pour•• Knockouts in each side of the basebox and in the base for conduit entry• 3 half tiles available (maximum 1 socket outlet) and one half tile available for AV/data• Supplied with a blank lid for concrete pour• Brass or stainless steel lid available
120 x 120mm120 x 120mm
Product Ref.L id Size
DPG-ZN-4DPG-ZN-4L
Pop-up 16 BrassPop-up 16 Stainless steel
Description
Chassis Size : 120 x 120 x 60mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Pop-up 26Features:
• Pop-up mechanism has soft opening•• Knockouts in each side of the basebox and in the base for conduit entry• 4 half tiles available (maximum 2 socket outlets)• Supplied with a blank lid for concrete pour• Brass or alu-alloy steel lid available
146 x 146mm146 x 146mm
Product Ref.L id Size
DPG-ZN-26DPG-ZN-26L
Pop-up 26 BrassPop-up 26 Alu-alloy
Description
Chassis Size : 120 x 120 x 60mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Hinge-140Features:
•while lid is closed• 4 x 25mm rubber grommets (one in each side) for conduit entry• F loor box base has machinable conduit entry point on each face• F loor box supplied with one autoswitch 10amp socket outlet, 15amp o r round p in earth socket available upon request• Brass or stainless steel lid available
140 x 140mm140 x 140mm
Product Ref.L id Size
DPG-140YKDPG-140KP
Hinge-140 BrassHinge-140 Stainless steel
Description
Chassis Size : 122 x 122 x 75mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Hinge-145Features:
•is closed• Supplied with a blank lid for concrete pour• Knockouts in each side of the base box for conduit entry• Brass or stainless steel lid available• c/w 3 autoswitched socket outlet and 2 data
209 x 144mm209 x 144mm
Product Ref.L id Size
DPG-145KDPG-145KP
Hinge-145 BrassHinge-145 Stainless steel
Description
Chassis Size : 210 x 145 x 75mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Hinge-180/180AKHinge-180 features:
• 4 half tiles available (maximum two socket outlets)• Supplied with a blank lid for concrete pour• Knockouts in each side of the base box for conduit entry• 3 bezels available for AV and/or data outlets•• Brass or stainless steel lid available
180 x 180mm180 x 180mm180 x 180 x 18mm180 x 180 x 18mm
Product Ref.L id Size
DPG-180AKDPG-180NKPDPG-180ANKDPG-180ANKP
Hinge-180 BrassHinge-180 Stainless steelHinge-180 Brass - recessed lidHinge-180 Stainless steel - recessed lid
Description
Chassis Size : 170 x 170 x 90mm
Hinge-180AK features:
•installed
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Hinge-250/250AK*Hinge-250 features:
•• Supplied with a blank lid for concrete pour• Knockouts in each side of the base box for conduit entry•• Brass or stainless steel lid available
250 x 250mm250 x 250mm250 x 250mm250 x 250mm
Product Ref.L id Size
DPG-250AKDPG-250NKPDPG-250ANKDPG-250ANKP
Hinge-250 BrassHinge-250 Stainless steelHinge-250 Brass - recessed lidHinge-250 Stainless steel - recessed lid
Description
Chassis Size : 230 x 230 x 75mmAK Chassis Size : 230 x 230 x 90mm
Hinge-250AK features:
•installed
*Please Note :
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Hinge-146Features:
•is closed• Supplied with a blank lid for concrete pour• Removable grommet in each side of the base box for conduit entry• 3 half tiles (maximum one socket outlet)• Brass or stainless steel lid available
146 x 146mm146 x 146mm
Product Ref.L id Size
DPG-146KDPG-146KP
Hinge-146 BrassHinge-146 Stainless steel
Description
Chassis Size : 135 x 135 x 70mm
Hinge-302ALFeatures:
•• Supplied with a blank lid for concrete pour•installed• Reversible cable exit insert for cable protection• Knockouts in each side of the base box for conduit entry• 6 half tiles available (maximum two socket outlets)• 2 half tiles available for AV and/or data outlets
210 x 140 mm
Product Ref.L id Size
DPG-302AL
Description
Chassis Size : 190 x 125 x 65mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Weatherproof-127Features:
• Weatheproof round screw lid• Stainless steel with only the top ring visible after installation• Knockouts in each side of the base box for conduit entry• 3 half tiles available (maximum one socket outlet)•
127 x 127mm
Product Ref.L id Size
DPG-127ZAP
Description
Chassis Size : 120 x 120 x 46mm
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Sigma-160Features:
• Dual 10amp autoswitched socket & 2 Cat6 RJ45• A luminium d ie-cast chassis complete with f our 25mm conduit access points• Four levelling screws•with rubber gasket• Casting height adjustment ring• Casting blank for use when pouring concrete• Minimum depth 60mm• 160mm diameter with 4mm bevelled edge
Options available:
• 15amp socket available on request• Cast brass construction or Chrome plated
160mm160mm130mm130mm
Product Ref.S ize
OPS1610BOPS1610CHOPS1110BOPS1110CH
Colors
BrassChromeBrassChrome
Sigma-130Features:
• Single 10amp autoswitched socket & 2 Cat6 RJ45• A luminium d ie-cast c hassis complete w ith f our 25mm conduit access points• Four levelling screws•with rubber gasket• Casting height adjustment ring• Casting blank for use when pouring concrete• Minimum depth 50mm• 130mm diameter with 3mm bevelled edge
Options available:
• 15amp socket available on request• Cast brass construction or Chrome plated
Sigma 160 BrassSigma 160 ChromeSigma 130 BrassSigma 130 Chrome
Description
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Plastic-624Features:
•between 75mm & 110mm• Lid is removeable & reversible• Floor box base has knockouts in each side & in base for conduit entry•• Maximum 3 sockets outlets (3 full tiles or 6 half tiles)• 6 half tiles available for AV and/or data outlets• Floor box lid has a carpet recess depth of 8mm• Floor box outer frame size 245 x 225mm
245 x 225mm
Product Ref.S ize
DPG-624ASP lastic height adjustable
Description
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Slab-93Features:
• 2 compartments access box comprising three distinct assemblies: the box base, the mounting frame, and the carpet trim/lid tray assembly• Knockouts in each l ong s ide of t he box base, t o accept both
• Mounting frame in galvanised steel, suitable for mounting into 183
• Complete box base with a grid to accept a range of interchangeable accessory plates• Carpet trim assembly in polycarbonate, blue grey color• Carpet trim moulding reinforced with steel• Carpet trim and lid tray assembly reversible through 180°• 6.5mm recess for carpet in the lid• Slide hinges to facilitate lid removal • Self-closing lid
85mm95mm115mm
Product Ref. Depth(w)
PPS93285GPPS93295GPPS932115G
35mm45mm65mm
Space above plates (x)
45mm45mm45mm
Space below plates (y)
Accesories options:
Part number
Description
PP4285 10amp15ampRound pin Earth
Options
Angled dual auto switched socket outlet, offset
Pictures
PDV4286 Can be user drilled for audio & RCA connectors
AV plate withVGA punch out
PDV4287 Supplied with 3 bezel blanks
Angled Cat6 dataplate
FB-ADAP-PLTU sed with standard electrical accesory products
Adapt plate*
FF-012 Soft wiring 20ampstarter
* Blank plate also available
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Slab-99Features:
• 4 compartments access box comprising three distinct assemblies: the box base, the mounting frame, and the carpet trim/lid tray assembly• Knockouts in each long side of the box base, to accept
• Mounting frame in galvanised steel, suitable for moun-
• Complete box base w ith a g rid to accept a range of interchangeable accessory plates• Carpet trim assembly in polycarbonate, blue grey color• Carpet trim moulding reinforced with steel• Carpet trim and lid tray assembly reversible through 180°• 6.5mm recess for carpet in the lid• Slide hinges to facilitate lid removal • Self-closing lid
85mm95mm115mm
Product Ref. Depth(w)
PPS99485GPPS99495GPPS994115G
30mm35mm60mm
Space above plates (x)
50mm55mm50mm
Space below plates (y)
Accesories options:
Part number
Description
PP4285 10amp15ampRound pin Earth
Options
Angled dual auto switched socket outlet, offset
Pictures
PDV4286 Can be user drilled for audio & RCA connectors
AV plate withVGA punch out
PDV4287 Supplied with 3 bezel blanks
Angled Cat6 dataplate
FB-ADAP-PLTU sed with standard electrical accesory products
Adapt plate*
FF-012 Soft wiring 20ampstarter
* Blank plate also available
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Floor ductFeatures:
• Fully accessible system suitable for commercial and
not possible• Extruded aluminium body with lid trim•masonry tile installation• Ideal for applications where chasing of trenches is not possible•carpet• Suitable for use with 8 to 10mm masonry tiles• Suitable for use with carpet tiles or surface mount• Available with optional covers for semi-recessed (SR) or surface mounted (SM) installations• Covers are pre-punched and countersunk•removeable screws, joining brackets p rovide facility f or alignment of duct during installation•
Product Ref.*
FFD 100/12FFD 100/12CFFD 100/12BFFD 100/12IPFFD 100/12SEFFD 100/12AP70FFD 100/12AP20
AFB 70AFB 20
Duct body - 3.0m lengthsDuct cover - 1.2m lengths90° bend junctionAccess inspection portsStop endFloor box adaptator AFB 70Floor box adaptator AFB20
Description
* : Duct cover and accessories available in: (FR) Fully Recessed (1.2m lengths) - (SR) Semi Recessed (1.2m lengths) - (SM) Surface Mounted (1.2m lengths)
FR Fully Recessed
SR Semi Recessed
SM Surface Mounted
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Floor boxes
Floor duct
Cable capacity chart
Power compartment Total area mm2
Power TPS cables 2.5mm2
Power TPS cables 4.0mm2
300mm2 22
Data compartment Total area mm2 Data cables Cat 5E Data cables Cat 6 Data cables Cat 6A
300mm2 64 3
AFB 20110H x 125W x 110D
FFD 100/12 (FR)FLUSH FLOOR DUCT
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Warranty Policy
The foregoing warranty is exclusively and hereby supersedes all other warranties, with the excep-tion of any warranties required and or implied by Australia Law.
-
defective by a dpg Technician, under the following terms and conditions: Coverage Limitation
-tings who has paid the full contract for the product(s).
2. This warranty is not transferable unless expressly assigned under a Deed of Assignment signed by dpg-
3. Within a period of One (1) calendar year from the original date of delivery to the purchaser, dpg-for-
-mine whether the part is a consumable or non-consumable part and whether the product or part is defective. For the avoidance of doubt, consumable parts shall include, but shall not be limited to, lamps and batteries.
4. This warranty does not entitle the purchaser to upgrade to newer models or to product enhancements.
inspection, normal servicing, transportation charges or any other expense incurred or service requested which is not covered under the terms of this Warranty Policy.
6. In the event that the product required for replacement is no longer in production and/or obsolete,
available, a charge may be incurred to the purchaser, for any upgraded part or product substituted.
7. Products and parts purchased deemed to be defective should be returned by the purchaser at their
Warranty Conditions
The above limited warranty is subject to the following conditions:
This
docu
ment
can b
e prin
ted bu
t is on
ly cu
rrent
at 28
/04/20
17
Page
1 of
2
02 9669 3449Unit 2, 2 Bronti Street, Mascot NSW 2020
Warranty Policy
4. The warranty does not extend to damage caused by :
•Fair wear and tear;•Liquid Spillage, acid or other chemical contaminants causing fouling,blockages or damage to sensors or to the products themselves;•Non compliance with the manufacturer’s recommendations and parameters stated in the installation and opera-tion manual supplied with the product;•Insect or vermin infestation;
•Faulty installation, repair or servicing by any third party including but not limited to : shortfalls in installation practices,
adequate scheduled or preventative maintenance.•Changes in the normal settings of the product;•Damage due to alteration by the end user;
•Damage to parts and/or products due to abuse, misuse, accident, improper maintenance, mishandling or use in
•Damage due to improper packaging or re-packing by a third party;
including, but not limited to events outside of human control, natural d isasters, Government restrictions (including the denial or cancellation of any export or other necessary licence), vandalism, wars, acts of terrorism, insurrections.
and the products are installed within Australia. Warranties are not available for leased products.
-ranted only for the unexpired portion of the original warranty. Any service or repair provided outside the
-
direct or indirect result of purchaser’s “Value Added Feature” or other building or service feature.
RESERVES THE RIGHT TO DETERMINE “WEAR AND TEAR” ON ANY ALL PRODUCTS.
9. -
whether for breach of contract, tort or otherwise, or whether arising out of the use of or inability to use
been advised of the possibility of such damages, or any claim by any other party.
10. T his warranty does n ot a ffect t he p urchaser’s l egal r ights if h e purchases as a consumer. “Consumer”means any natural person acting for purposes outside their trade, business or profession and shall not include a purchaser who is a corporate legal entity who purchases in the course of its trade or
and consumer Act 2010.
02 9669 3449 Monday through Friday Australia working time (9.00 am to 5.00 pm) to determine the nature of the pro-blem.
WHO MAY HAVE BEEN EMPLOYED BY THE PURCHASER TO INSTALL, SERVICE OR MAINTAIN THE PRODUCT. TAMPERING OR REMOVING THE SERIAL NUMBER ON THE PRODUCT WILL VOID THIS WARRANTY IN ITS ENTI-
This
docu
ment
can b
e prin
ted bu
t is on
ly cu
rrent
at 28
/04/20
17
Page
2 of
2