professor, mechanical engineering depar tment of ... · pdf fileestimation", handbook of...

RANDALL J. ALLEMANG, PhD

Professor, Mechanical EngineeringDirector, Str uctural Dynamics Research Lab

Depar tment of Mechanical Engineering and Material ScienceCollege of Engineering and Applied ScienceUniversity of CincinnatiCincinnati, Ohio 45221-0072

TEL: (513) 556-2725FAX: (513) 556-3390

E-Mail: [email protected]

Ph.D. 1980 University of CincinnatiMS 1973 University of CincinnatiBSME 1972 University of Cincinnati

PROFESSIONAL AND SOCIETY AFFILIATIONS

Amer ican Society of Mechanical Engineers (ASME), Member (1973-Present), Fellow (2010)Amer ican Society of Engineering Education (ASEE), Member (1986-Present)Society of Automotive Engineers (SAE), Member (1983-Present), Fellow (2009)Society of Experimental Mechanics (SEM), Member (1987-Present), Fellow (2010)Ohio Society of Professional Engineers (EIT)Omicron Delta Kappa (ODK), MemberSigma Xi, Member (1989-Present)Pi Tau SigmaTau Beta Pi

FIELDS OF SPECIAL INTEREST

Exper imental Modal Analysis, Exper imental System IdentificationMultiple Input/Output System Analysis, Nonlinear System IdentificationSignal Processing Techniques - Vibration TestingExper imental Calibration and Validation of ModelsExper imental Quantification of Margin and Uncertainty

EXPERIENCE

1989-Present University of Cincinnati, Professor1984-1989 University of Cincinnati, Associate Professor

-1-

R.J. Allemang, PhD September 10, 2016

1982-1984 University of Cincinnati, Assistant Professor1981-1982 University of Cincinnati, Research Assistant Professor1978-1981 University of Cincinnati, Research Associate1975-1978 University of Cincinnati, Instructor1973-1975 University of Cincinnati, Research Assistant1972-1973 University of Cincinnati, Teaching Assistant1968-1971 Abex Cor poration, Dennison Research Center, Co-op Engineer

TECHNICAL ACTIVITIES

Member SEM Fellows Committee (2010-2016), Chair (2015-2016)Senior Collaborator Structural Sciences Center, WPAFB, AFRL (2007-Present)Scientific Committee Inter national Operating Modal Analysis Conference (IOMAC)

(2007-Present)Scientific Committee ISMA Noise and Vibration Engineering Conference, (1984-Present)Advisor y Board International Modal Analysis Conference (1982-Present),

Chair (1987-1995)Contr ibuting Editor Sound and Vibration Magazine (1983-Present)Session Chairman SEM Inter national Modal Analysis Conference (1981-Present)Session Chairman KUL Inter national Conference on Noise and Vibration Engineering

(1978-Present)Reviewer Jour nal of Sound and Vibration (1995-Present)Reviewer AIAA Journal (1990-Present)Reviewer ASME, Journal of Vibration and Acoustics (1988-Present)Reviewer Acoustic Society of America (1988-Present)Editor ial Board Experimental Mechanics, Inter national Advisor y Board,

Society of Experimental Mechanics (2007-2012)Member SAE Engineer ing Education Board, (2009-2012)RPT Reviewer Purdue University (2008)RPT Reviewer Michigan Technological University (2008)Site Reviewer National Science Foundation, Division of Civil and Mechanical Systems,

Networ k for Ear thquake Engineer ing Simulation (NEES) Program(2001-2002,2007)

Executive Board Society of Experimental Mechanics (1998-2006)President (2003-2004)

Associate Editor Jour nal of Mechanical Systems and Signal Processing (1997-2000)Technical Editor Modal Analysis: The International Journal of Analytical and

Exper imental Modal Analysis (1995-1996)Editor ial Board Journal of Mechanical Systems and Signal Processing (1985-1995)Associate Editor ASME, Journal of Vibrations, Acoustics, Stress, and Reliability

in Design (1986-1988)Panel Reviewer National Science Foundation, Division of Civil and Mechanical Systems,

Faculty Early Career Development Program, (1998)Panel Reviewer National Science Foundation, Dynamic Systems and Control Program,

(1993)Reviewer NASA, Johnson Space Center (1995)Session Chairman SAE Noise and Vibration Conference (1995,1997,1999,2001)

-2-


RPT Reviewer University of Kentucky (1994)RPT Reviewer University of Iowa (1994)RPT Reviewer Penn State University (1987,1993,1999)RPT Reviewer Naval Postgraduate School (1996)RPT Reviewer Purdue University (1997)RPT Reviewer Penn State University (1999)RPT Reviewer University of Illinois at Chicago (1999)

RESEARCH ACTIVITIES

2007-2015 Structural Sciences Center, WPAFB, AFRL2012-2015 Joint Technology Development Program, Aeromechanics Modeling, GE-UCRI1991-2014 The Boeing Company2008-2011 DOE/Y-12, Babcock & Wilcox2005-2008 The Ford Motor Company2007 Raytheon Missile Systems2006-2007 Agilent2004-2006 Bruel & Kjaer2004-2005 General Dynamics2002-2003 The Goodyear Company1995-1996, 1999 Procter & Gamble1996-1999 Akebono BSEC1992-1995 Cincinnati Milacron1992-1994 NASA-Ames Research Center1991-1993 General Motors Corporation, Cadillac Motor Car Division1989-1991 NASA-Langley Research Center1987-1990 Technical Science Services, Inc.1983-1988 USAF/Wright-Patterson Flight Dynamics Laborator y1985-1986 Navistar International1981-1986 General Motors Corporation, CPC Division1980-1985 USAF/Eglin Str uctural Dynamics Laborator y1983-1984 U.S. Naval Research Laborator y1978-1981 NASA-Langley Research Center1978-1980 The Boeing Company1975,1979 NASA-Lewis Research Center1977 Rockwell International, Columbus Aircraft Division1975-1977 Hewlett Packard Company1976 Rockwell International, Rocketdyne Division1976 Allis Chalmers, Hydro Turbine Division

-3-


PUBLICATIONS AND PAPERS

• Handbook of Experimental Structural Mechanics, Allemang, R.J., Avitabile, P. (Co-Edi-tors), Society of Experimental Mechanics, Spr inger, 2015-2017 (In Progress).

• Allemang, R.J., Phillips, A.W., Brown, D.L., "Chapter 12: Exper imental Modal ParameterEstimation", Handbook of Experimental Structural Mechanics, Allemang, R.J.,Avitabile, P. (Co-Editors), Society of Experimental Mechanics, Spr inger, 2015-2017 (InvitedChapter, In Progress).

• Allemang, R.J., Phillips, A.W., "Chapter 8: Str uctural Measurements", Handbook of Ex-perimental Structural Mechanics, Allemang, R.J., Avitabile, P. (Co-Editors), Society ofExper imental Mechanics, Spr inger, 2015-2017 (Invited Chapter, In Progress).

• Vemuri, A., Allemang, R.J., Phillips, A.W., "New Methods for Estimating Instantaneous Ve-locity for Rotating Systems", Proceedings, Inter national Conference on Noise and Vibra-tion Engineering (ISMA), Katholieke Universiteit Leuven, Belgium, 16 pp., 2016.

• Shar ma, A., Allemang, R.J., Brown, D.L., "A New Excitation Technique for MIMO FRF Esti-mation Using Multiple, Pneumatic, Random Imapct Inputs", Proceedings, Inter nationalConference on Noise and Vibration Engineering (ISMA), Katholieke Universiteit Leuven,Belgium, 18 pp., 2016.

• Allemang, R.J., Kollur i, M.M., Spottswood, Michael, Eason, T., "Decomposition Based Vali-dation Metrics for Use With Full Field Measurement Situations", Special Issue: Advancesin Validation of Computational Mechanics Models, Journal of Strain Analysis, Vol. 51,No. 1, pp. 14-31, 2016.

• Baver, B.C., Phillips, A.W., Allemang, R.J., Kim, J., "Magnetic Excitation and the Effects onModal Frequency and Damping", Proceedings, Inter national Modal Analysis Conference(IMAC), 7 pp., 2016.

• Abrahamsson, T.J.S., Allemang, R.J., "What is Normal About Normal Modes?", Proceed-ings, Inter national Modal Analysis Conference (IMAC), 13 pp., 2016.

• Young, A., Brown, D.L., Allemang, R.J., "Estimating System Modal Parameters Using FreeDecay Time Data", Proceedings, Inter national Modal Analysis Conference (IMAC), 13 pp.,2016.

• Deshmukh, S., Allemang,R.J., Phillips, A.W., "Synthesizing Uncorrelated Drive Files forMIMO Transmissibility Measurements on Road Simulators", Proceedings, Inter nationalModal Analysis Conference (IMAC), 13 pp., 2016.

• Inamdar, S., Allemang, R.J., Phillips, A.W., "Estimation of Frequency and Damping of aRotating System Using MEOT and Virtual Sensor Concept", Proceedings, Inter nationalModal Analysis Conference (IMAC), 14 pp., 2016.

• Naranjan, A.C., Allemang, R.J., Phillips, A.W., "Normalization of Complex Modes by Trun-cation of Alpha - Polynomial", Proceedings, Inter national Modal Analysis Conference(IMAC), 15 pp., 2016.

• Allemang, R.J., Phillips, A.W., "Comparison of Var ious Modal Vector Estimation MethodsUsed in Modal Parameter Estimation", Proceedings, Inter national Modal Analysis Confer-ence (IMAC), 23 pp., 2016.

-4-


• Shar ma, A., Brown, D.L., Allemang, R.J., Phillips, A.W., "An Alternative MIMO FRF Esti-mation Method Using Pneumatic Exciters", Proceedings, Inter national Modal AnalysisConference (IMAC), 15 pp., 2016.

• Vemuri, A., Allemang, R.J., Phillips, A.W., "Estimation of Instantaneous Speed for RotatingSystems: New Processing Techniques", Proceedings, Inter national Modal Analysis Confer-ence (IMAC), 15 pp., 2016.

• Deshpande, S., Allemang, R.J., "Virtual Dominant Sensor for Observability Improvement inRotating Systems", SAE Paper Number 15NVC-0102, 14 pp., 2015.

• Pasha, H., Kohli, K., Allemang, R.J., Phillips, A.W., "Structural Dynamics Model Validationand Calibration of a Rectangular Steel Plate Structure", Proceedings, Inter national ModalAnalysis Conference (IMAC), 2015.

• Brown, D.L., Allemang, R.J., "For ty Years of Use and Abuse of Impact Testing: A PracticalGuide to Making Good FRF Measurements", Proceedings, Inter national Modal AnalysisConference (IMAC), 2015.

• Pasha, H., Allemang, R.J., Phillips, A.W., "Estimation of Torsional Compliance (Stiffness)From Free-free FRF Measurments: eRCF Theory", Proceedings, Inter national Modal Anal-ysis Conference (IMAC), 2015.

• Young, A., Poland, J., Pasha, H., Allemang, R.J., Phillips, A.W., "Estimation of TorsionalCompliance (Stiffness) From Free-free FRF Measurments: eRCF Application", Proceed-ings, Inter national Modal Analysis Conference (IMAC), 2015.

• Pasha, H., Allemang, R.J., Phillips, A.W., "Estimation of Bending Compliance (Stiffness)From Free-free FRF Measurments: eBCF Theory", Proceedings, Inter national Modal Anal-ysis Conference (IMAC), 2015.

• Allemang, R.J., Phillips, A.W., "Spatial Infor mation in Autonomous Modal Parameter Esti-mation", Shock and Vibration Journal, Special ICEDyn Issue, 18 pp, 2014.

• Allemang, R.J., Spottswood, S.M., Eason, T.G., "A Principal Component Analysis (PCA)Decomposition Based Validation Metric for Use With Full Field Measurement Situations",Proceedings, Inter national Modal Analysis Conference (IMAC), 2014.

• Allemang, R.J., Phillips, A.W., "Un-weighted and Weighted Versions of the Modal Assur-ance Criter ion (MAC) for Evaluation of Modal Vector Contamination", Proceedings, Inter-national Modal Analysis Conference (IMAC), 2014.

• Allemang, R.J., Phillips, A.W., "Integrating Multiple Algorithms in Autonomous Modal Pa-rameter Estimation", Proceedings, Inter national Modal Analysis Conference (IMAC), 2014.

• Phillips, A.W., Allemang, R.J. "Nor malization of Experimental Modal Vectors to RemoveModal Vector Contamination", Proceedings, Inter national Modal Analysis Conference(IMAC), 2014.

• Pasha H.G., Allemang R.J., Phillips A.W., "Techniques for Synthesizing FRFs From Analyt-ical Models", Proceedings, Inter national Modal Analysis Conference (IMAC), 2014.

• Pasha H.G., Kohli K.N., Allemang R.J., and Phillips A.W., "Soft Support Systems for Devel-oping System Models", Proceedings, Inter national Modal Analysis Conference (IMAC),2014.

-5-


• Pasha H.G., Allemang R.J., Brown, D.L., Phillips A.W., "Static Torsional Stiffness From Dy-namic Measurements Using Impedance Modeling Technique", Proceedings, Inter nationalModal Analysis Conference (IMAC), 2014.

• Allemang, R.J., "A Principal Component Analysis (PCA) Decomposition Based ValidationMetr ic for Use With Full Field Measurement Situations", Invited Presentation, Second In-ter national Workshop on Validation of Computational Mechanics Models, London, Eng-land, November 5, 2013.

• Allemang, R.J., "Refinement of Metrics Used to Quantify Margin and Uncertainty (QMU) inthe Extreme Environments of the Hypersonic Vehicle Program", Final Report- US AirForce Summer Faculty Fellowship Program, 16 pp., 2013.

• Allemang, R.J., "Spatial Infor mation in Autonomous Modal Parameter Estimation", InvitedKe ynote Paper, Inter national Conference on Structural Engineering Dynamics (ICEDyn2013), Sesimbra, Por tugal, 18 pp, June 2013.

• Allemang, R.J., "Validation Metrics and Quantification of Margin and Uncertainty (QMU) inthe Extreme Environments of the Hypersonic Vehicle Program", Final Report - US AirForce Summer Faculty Fellowship Program, 16 pp., 2012.

• "Evaluation of a Long Ter m, Viable Dynamic Data Archive For mat", Phillips, A.W., Alle-mang, R.J., Proceedings, Inter national Modal Analysis Conference (IMAC), 6 pp., 2012.

• Dargah, M.H.P., Allemang, R.J., Phillips, A.W., "Exciter Impedance and Cross-Axis SensorSensitivity Issues in FRF Estimation", Proceedings, Inter national Modal Analysis Confer-ence (IMAC), 9 pp., 2012.

• Majba, C., Allemang, R.J., Phillips, A.W., "A Review of Uncer tainty Quantification of Esti-mation of Frequency Response Functions", Proceedings, Inter national Modal AnalysisConference (IMAC), 7 pp., 2012.

• Allemang, R.J., "Validation of the Digital Twin of a Reusable, Hot Structure Hypersonic Ve-hicle", Final Report- US Air Force Summer Faculty Fellowship Program, 13 pp., 2011.

• Allemang, R.J., Phillips, A.W., Brown, D.L., "Combined State Order and Model Order For-mulations in the Unified Matrix Polynomial Method (UMPA)", Proceedings, Inter nationalModal Analysis Conference (IMAC), 15 pp., 2011.

• Phillips, A.W., Allemang, R.J., Brown, D.L., "Autonomous Modal Parameter Estimation:Methodology", Proceedings, Inter national Modal Analysis Conference (IMAC), 22 pp.,2011.

• Allemang, R.J., Phillips, A.W., Brown, D.L., "Autonomous Modal Parameter Estimation:Statistical Considerations", Proceedings, Inter national Modal Analysis Conference (IMAC),17 pp., 2011.

• Brown, D.L., Allemang, R.J., Phillips, A.W., "Autonomous Modal Parameter Estimation:Application Examples", Proceedings, Inter national Modal Analysis Conference (IMAC), 26pp., 2011.

• "Development of a Long Ter m, Viable Dynamic Data Archive For mat", Phillips, A.W., Alle-mang, R.J., Proceedings, Inter national Modal Analysis Conference (IMAC), 15 pp., 2011.

• "Sur vey of Modal Techniques Applicable to Autonomous/Semi-Autonomous ParameterIdentification" ", Allemang, R.J., Brown, D.L., Phillips, A.W.., Proceedings, Inter nationalConference on Noise and Vibration Engineering (ISMA), Katholieke Universiteit Leuven,

-6-


Belgium, 42 pp., 2010.

• "Archive For mat Requirements for Long Ter m Storage of Dynamic Signal Data", Phillips,A.W., Allemang, R.J., Proceedings, Inter national Conference on Noise and Vibration Engi-neer ing (ISMA), Katholieke Universiteit Leuven, Belgium, 8 pp., 2010.

• "Application of Modal Scaling to the Pole Selection Phase of Parameter Estimation", Alle-mang, R.J., Phillips, A.W., Proceedings, Inter national Modal Analysis Conference (IMAC),16 pp., 2010.

• "Application of Principal Component Analysis Methods to Experimental Structural Dynam-ics", Allemang, R.J., Phillips, A.W., Allemang, M.R., Proceedings, Inter national ModalAnalysis Conference, 10 pp., 2010.

• "Requirements for a Long-term, Viable Archive Data For mat", Phillips, A.W., Allemang,R.J., Proceedings, Inter national Modal Analysis Conference, 5 pp., 2010.

• "Feasability of Using a Four-Post Simulator for Modal Analysis of a Truck Frame", Sharma,B., Swaminathan, B., Allemang, R.J., Chauhan, S., Proceedings, Inter national Modal Anal-ysis Conference, 26 pp., 2009.

• "Review of Spatial Domain Modal Parameter Estimation Procedures and Testing Meth-ods", Brown, D.L., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference,23 pp., 2009.

• "Chapter 21: Exper imental Modal Analysis", Shock and Vibration Handbook, Sixth Edi-tion, Harr is, C.M., Piersol, A.G. (Editors), Allemang, R.J., Brown, D.L., McGraw-Hill BookCompany, 2009.

• "Spatial Domain, Experimental Modal Parameter Estimation Methods", Brown, D.L., Alle-mang, R.J., Proceedings, Inter national Conference on Noise and Vibration Engineering(ISMA), Katholieke Universiteit Leuven, Belgium, 15 pp., 2008.

• "Additional Mechanisms for Providing Clear Stabilization Diagrams", Phillips, A.W., Alle-mang, R.J., Proceedings, Inter national Conference on Noise and Vibration Engineering(ISMA), Katholieke Universiteit Leuven, Belgium, 15 pp., 2008.

• "Modal Studies on a Truck Frame and Suspension", Swaminathan, B., Sharma, B.,Chauhan, S., Allemang, R.J., Proceedings, Inter national Conference on Noise and Vibra-tion Engineering (ISMA), Katholieke Universiteit Leuven, Belgium, 11 pp., 2008.

• "Application of OMA-EMIF Algorithm to Cable Stayed Bridges", Chauhan, S., Helmicki,A.J., Hunt, V.J., Allemang, R.J., Proceedings, Inter national Conference on Noise and Vi-bration Engineering (ISMA), Katholieke Universiteit Leuven, Belgium, 17 pp., 2008.

• "A Structural Neural System for Real-Time Health Monitoring of Composite Materials",Kir ikera, G.R., Shinde, V., Schulz, M.J., Ghoshal, A., Sundaresan, M.J., Allemang, R.J.,Lee, J.W., Structural Health Monitoring, Vol. 7, No. 1, pp. 65-83, 2008.

• "Damping Estimation Using Operational Modal Analysis", Chauhan, S., Phillips, A.W., Alle-mang, R.J., Proceedings, Inter national Modal Analysis Conference, 21 pp., 2008.

• "A Low Order Frequency Domain Approach for Structural Damage Detection", Zhao, W.,Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, 13 pp., 2008.

-7-


• "Application of OMA Algorithms to US Grant Bridge at Por tsmouth, Ohio", Chauhan, S.,Saini, J.S., Kangas, S., Helmicki, A.J., Hunt, V.J., Allemang, R.J., Proceedings, Inter nation-al Modal Analysis Conference, 15 pp., 2008.

• "An Over view of Excitation, Averaging and Processing Issues for Nonlinear System Identi-cation", Spottswood, S.M., Allemang, R.J., Mechanical Systems and Signal Processing,Apr il, 2007.

• "On the Investigation of Some Parameter Identification and Experimental Modal FilteringIssues for Nonlinear Reduced Order Models", Spottswood, S.M., Allemang, R.J., Experi-mental Mechanics, Vol. 47, pp. 511-521, 2007.

• "Unified Matrix Polynomial Approach for Operational Modal Analysis", Chauhan S.,Mar tell, R., Allemang, R.J., Brown, D.L., Proceedings, Inter national Modal Analysis Con-ference, 13 pp., 2007.

• "Application of Independent Component Analysis and Blind Source Separation Techniquesto Operational Modal Analysis", Chauhan S., Martell, R., Allemang, R.J., Brown, D.L., Pro-ceedings, Inter national Modal Analysis Conference, 13 pp., 2007.

• "Implementation of Complex Frequency Mapping to Low Order Frequency Domain Algo-rithm for Operational Modal Analysis", Chauhan S., Martell, R., Allemang, R.J., Brown,D.L., Proceedings, Inter national Modal Analysis Conference, 12 pp., 2007.

• "Damage Localisation in Composite and Metallic Structures Using a Structural Neural Sys-tem and Simulated Acoustic Emissions", Kirikera, G.R., Shinde, V., Schulz, M.J., Ghoshal,A., Sundaresan, M. and Allemang, R.J., Mechanical Systems and Signal Processing,Vol. 21, No. 1, pp. 280-297, 2007.

• "Str uctural Dynamics Education at the University of Cincinnati", Allemang, R.J., Proceed-ings, Inter national Modal Analysis Conference, 18 pp., 2007.

• "The Modern Era of Exper imental Modal Analysis: One Historical Perspective", Brown,D.L., Allemang, R.J., Sound and Vibration Magazine , Vol. 40, No. 1, 10 pp., Januar y,2007.

• "A Complete Review of the Complex Mode Indicator Function (CMIF) with Applications",Allemang, R.J., Brown, D.L., Proceedings, Inter national Conference on Noise and Vibra-tion Engineering (ISMA), Katholieke Universiteit Leuven, Belgium, 38 pp., 2006.

• Chauhan S., Martell, R., Brown, D.L., Allemang, R.J. "Considerations in the Application ofSpatial Domain Algorithms to Operational Modal Analysis", Proceedings, Inter nationalConference on Noise and Vibration Engineering (ISMA), Katholieke Universiteit Leuven,Belgium, 16 pp., 2006.

• Chauhan S., Martell, R., Brown, D.L., Allemang, R.J. "A Low Order Frequency Domain Al-gor ithm for Operational Modal Analysis", Proceedings, Inter national Conference on Noiseand Vibration Engineering (ISMA), Katholieke Universiteit Leuven, Belgium, 14 pp., 2006.

• "Initial Evaluation of a Novel Active/Passive Str uctural Neural System for Health Monitoringof Composite Materials", Kirikera, G.R., Lee, J.W., Schulz, M.J., Ghoshal, A., Sundaresan,M.J., Allemang, R.J., Shanov, V., Westheider, B., Journal of Smart Materials and Struc-tures, Vol. 15, pp. 1275-1286, 2006.

-8-


• "Identification of Nonlinear Parameters for Reduced Order Models", Spottswood, S.M.,Allemang, R.J., Journal of Sound and Vibration, Vol. 295, pp. 226-245, 2006.

• "Identifying Nonlinear Parameters for Reduced Order Models", Spottswood, S.M., Alle-mang, R.J., Proceedings, Ninth International Conference on Recent Advances in Struc-tural Dynamics, Southampton, UK, July 2006.

• "Identifying Nonlinear Parameters for Reduced Order Models. Par t I: An Analytical Com-par ison", Spottswood, S.M., Allemang, R.J., Proceedings, Inter national Modal AnalysisConference, 11 pp., 2006.

• "Identifying Nonlinear Parameters for Reduced Order Models. Par t II, Validation using Ex-per imental Data", Spottswood, S.M., Allemang, R.J., Proceedings, Inter national ModalAnalysis Conference, 11 pp., 2006.

• "New Concepts GVT", Pickrel, C.R., Foss, G.C.,Phillips, A.W., Allemang, R.J., Brown, D.L.,Proceedings, Inter national Modal Analysis Conference, 11 pp., 2006.

• "Extension of Traditional Modal Analysis Algorithms to Ambient Testing Using UMPA",Chauhan, S., Martell, R., Brown, D.L., Allemang, R.J., Proceedings, Inter national ModalAnalysis Conference, 11 pp., 2006.

• "A Structural Neural System for Health Monitoring of Composite and Metallic Structuresunder Ambient Conditions", Goutham R.Kirikera, Vishal Shinde, Mar k J.Schulz, RandallAllemang, Mannur J. Sundaresan, Anindya Ghoshal, Mechanical Systems and SignalProcessing, (Submitted), 2005.

• "A First Order, Extended State Vector Expansion Approach to Experimental Modal Param-eter Estimation", Brown, D.L., Phillips, A.W., Allemang, R.J., Proceedings, Inter nationalModal Analysis Conference, 11 pp., 2005.

• "Data Presentation Schemes for Selection and Identification of Modal Parameters",Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, 10pp., 2005.

• "The Unified Matrix Polynomial Approach to Understanding Modal Parameter Estimation:An Update", Allemang, R.J., Phillips, A.W., Proceedings, Inter national Conference onNoise and Vibration Engineering, Katholieke Universiteit Leuven, Belgium, 36 pp., 2004.

• "Obser vations Concerning Modern Modal Parameter Estimation", Brown, D.L., Allemang,R.J., Proceedings, Inter national Conference on Noise and Vibration Engineering,Katholieke Universiteit Leuven, Belgium, 16 pp., 2004.

• "A Low Order Implementation of the Polyreference Least Squares Complex Frequency(LSCF) Algorithm", Phillips, A.W., Allemang, R.J., Proceedings, Inter national Conferenceon Noise and Vibration Engineering, Katholieke Universiteit Leuven, Belgium, 28 pp.,2004.

• "The Impact of Measurement Condensation and Modal Par ticipation Vector Normalizationon the Estimation of Modal Vectors and Scaling", Allemang, R.J., Phillips, A.W., Proceed-ings, Inter national Modal Analysis Conference, 12 pp., 2004.

• "A Magnetorheological Semi-active Isolator to Reduce Noise and Vibration Transmissibilityin Automobiles", Stelzer, G.J., Schultz, M.J., Kim, J., Allemang, R.J., Journal of Intelli-gent Material Systems and Structures, Vol. 14, No. 12, pp. 743-765, 2003.

-9-


• "Application of a Generalized Residual Model to Frequency Domain Modal Parameter Esti-mation", Fladung, W.A., Phillips, A.W., Allemang, R.J., India-US 2001 Symposium, Emerg-ing Trends in Vibration and Noise Engineering, 15 pp., 2001. Journal of Sound and Vi-bration, Vol. 262, No. 3, pp. 677-705, 2003.

• "An Over view of MIMO-FRF Excitation/Averaging/Processing Techniques", Phillips, A.W.,Allemang, R.J., India-US 2001 Symposium, Emerging Trends in Vibration and Noise Engi-neer ing, 17 pp., 2001. Journal of Sound and Vibration, Vol. 262, No. 3, pp. 651-675,2003.

• "The Modal Assurance Criter ion (MAC): Twenty Years of Use and Abuse", Allemang, R.J.,Proceedings, Inter national Modal Analysis Conference, pp. 397-405, 2002. Sound andVibration Magazine , Vol. 37, No. 8, pp. 14-23, August, 2003.

• "Chapter 21: Exper imental Modal Analysis", Shock and Vibration Handbook, Fifth Edi-tion, Harr is, C.M., Piersol, A.G. (Editors), Allemang, R.J., Brown, D.L., McGraw-Hill BookCompany, 2002.

• "Acoustic Intensity Measurement of Road Simulator Hydraulic Actuator", Frenz, E.R., Alle-mang, R.J., Dumbacher, S. Proceedings, Inter national Modal Analysis Conference, 7 pp.,2001.

• "Some Insights into the Mixed Modes of Rotors", Dias, M. , Allemang, R.J., Proceedings,Inter national Modal Analysis Conference, 7 pp., 2001.

• "Discrete Frequency Models: A New Approach to Temporal Analysis", Adams, D. E. andAllemang, R. J., ASME Journal of Vibration and Acoustics, Vol. 123, pp. 98-103, 2001.

• "Subtleties in Nonlinear Structural Dynamic System Identification", Adams, D.E., Allemang,R.J., Proceedings, Eighth Conference on Nonlinear Vibrations, Stability and Dynamics ofStr uctures, Blacksburg, Virginia, 12 pp., 2000.

• "Spatial Truncation in Models of Nonlinear Structural Dynamics Systems", Adams, D.E.,Allemang, R.J., Phillips, A.W., Wynn, R.H., Journal of Sound and Vibration, Vol. 237,No. 1 pp.145-161, October 2000.

• "Residual Frequency Autocorrelation as an Indicator of Nonlinearity", Adams, D.E., Alle-mang, R.J., International Journal of Non-Linear Mechanics, 16 pp., 2000.

• "Polynomial, Non-Polynomial and Orthogonal Polynomial Generating Functions for Nonlin-ear System Identification", Adams, D.E., Allemang, R., Proceedings, Inter national Confer-ence on Noise and Vibration Engineering, Katholieke Universiteit Leuven, Belgium, pp.665-670, 2000.

• "Noise Source Evaluation Testing on MTS Series 320 Road Simulator", Frenz, E., Dumb-acher, S., Allemang, R., Mergeay, M., Proceedings, Inter national Conference on Noise andVibration Engineering, Katholieke Universiteit Leuven, Belgium, 7 pp., 2000.

• "A New Detection Method for Structural Non-Linearities", Roscher, T., Allemang, R.,Phillips, A.W., Proceedings, Inter national Conference on Noise and Vibration Engineering,Katholieke Universiteit Leuven, Belgium, 8 pp., 2000.

• "A Frequency Domain Method for Estimating the Parameters of a Nonlinear Structural Dy-namic Model through Feedback", Adams, D.E., Allemang, R.J., Mechanical Systems andSignal Processing, Vol. 14, No. 4, pp. 637-656, 2000.

-10-


• "Introduction of a General User Excitation Source Signal for Modal Testing", Fladung,W.A., Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Confer-ence, 7 pp., 2000.

• "Evaluation of Tire-Ground Boundary Conditions and the Effects on FRF Measurements",Frenz, E.R., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, 5 pp.,2000.

• "A Superposition Principle for Nonlinear Systems", Adams, D.E., Allemang, R.J., Proceed-ings, Inter national Modal Analysis Conference, pp. 702-710, 2000.

• "New Spatial MDOF Character ization and Identification Techniques for Nonlinear Sys-tems", Adams, D.E., Allemang, R.J., Proceedings, Inter national Modal Analysis Confer-ence, pp. 725-732, 2000.

• "A New Der ivation of the Frequency Response Function Matrix for Vibrating NonlinearSystems", Adams, D.E., Allemang, R.J., Journal of Sound and Vibration, Volume 227,Number 5, pp. 1083-1108, 1999.

• "Character ization of Nonlinear Vibrating Systems Using Internal Feedback and FrequencyResponse Modulation", Adams, D.E., Allemang, R.J., ASME Journal of Vibration andAcoustics, Volume 121, Number 4, pp. 495-500, 1999.

• "Demonstration of Multiple Degree of Freedom Nonlinear System Identification Using Timeand Frequency Domain Methods", Adams, D.E., Allemang, R.J., Proceedings, Inter nation-al Modal Analysis Conference, pp. 315-322, 1999.

• "Application of Differencing to Frequency Domain Parameter Estimation Algorithms",Dahling, T.M., Allemang, R.J., Phillips, A.W., Proceedings, Inter national Modal AnalysisConference, 8 pp., 1999.

• "Using Cyclic Averaging with Impact Testing", William A. Fladung, Andrew T. Zucker, AllynW. Phillips, Randall J. Allemang Proceedings, Inter national Modal Analysis Conference, 7pp., 1999.

• "Frequency Resolution Effects on FRF Estimation: Cyclic Averaging vs. Large Block Size",Allyn W. Phillips, Andrew T. Zucker, Randall J. Allemang Proceedings, Inter national ModalAnalysis Conference, 4 pp., 1999.

• "A Spatial Method of Character izing Nonlinear ities in Multiple Degree of Freedom Vibrat-ing Systems", Adams, D.E., Allemang, R.J., Proceedings, Inter national Modal AnalysisConference, pp. 1195-1202, 1999.

• "A Comparison of MIMO-FRF Excitation/Averaging Techniques on Heavily and LightlyDamped Structures", Phillips, A.W., Zucker, A.T., Allemang, R.J., Proceedings, Inter nation-al Modal Analysis Conference, 10 pp., 1999.

• "Sur vey of Nonlinear Detection and Identification Techniques for Experimental Vibrations",Adams, D.E., Allemang, R.J., Proceedings, Inter national Conference on Noise and Vibra-tion Engineering, Vol. 1, Katholieke Universiteit Leuven, Belgium, pp. 269-281, 1998.

• "The Enhanced Frequency Response Function (eFRF): Scaling and Other Issues",Phillips, A.W., Allemang, R.J., Proceedings, Inter national Conference on Noise and Vibra-tion Engineering, Volume 1, Katholieke Universiteit Leuven, Belgium, 8 pp., 1998.

-11-


• "An Over view of MIMO-FRF Excitation/Averaging Techniques", Phillips, A.W., Allemang,R.J., Zucker, A.T., Proceedings, Inter national Conference on Noise and Vibration Engi-neer ing, Volume 1, Katholieke Universiteit Leuven, Belgium, 12 pp., 1998.

• "A Unified Matrix Polynomial Approach to Modal Identification", Allemang, R.J., Brown,D.L., Journal of Sound and Vibration, Volume 211, Number 3, pp. 301-322, April 1998.

• "Estimating Modal Parameters from Different Solution Sets", Phillips, A.W., Allemang, R.J.,Pickrel, C.R., Proceedings, Inter national Modal Analysis Conference, 10 pp., 1998.

• "A new Excitation Method: Combining Burst Random Excitation with Cyclic Averaging",Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, 10pp., 1998.

• "The Complex Mode Indicator Function (CMIF) as a Parameter Estimation Method",Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, 10pp., 1998.

• "Vir tual Measurements in Experimental Modal Analysis", Allemang, R.J., Proceedings,Brazilian Congress of Engineering Mechanics, 14 pp., 1997.

• "Estimating Modal Parameters from Different Solution Sets", Phillips, A.W., Allemang, R.J.,Proceedings, Japan International Modal Analysis Conference, pp. 207-215, 1997.

• "Cluster ing of Modal Frequency Estimates from Different Solution Sets", Phillips, A.W.,Allemang, R.J., Pickrel, C.R., Proceedings, Inter national Modal Analysis Conference, pp.1053-1063, 1997.

• "Condensation of the Spatial Domain in Modal Parameter Estimation", Dippery, K.D.,Phillips, A.W., Allemang, R.J., Modal Analysis: International Journal of Analytical andExperimental Modal Analysis, Volume 11, Number 3/4, 6 pp., 1996.

• "Spectral Decimation in Low Order Frequency Domain Modal Parameter Estimation", Dip-per y, K.D., Phillips, A.W., Allemang, R.J., Modal Analysis: International Journal of Ana-lytical and Experimental Modal Analysis, Volume 11, Number 3/4, 5 pp., 1996.

• "Numer ical Considerations in Modal Parameter Estimation", Phillips, A.W., Allemang, R.J.,Proceedings, Inter national Seminar on Modal Analysis, Katholieke Universiteit Leuven,Belgium, 10 pp., 1996.

• "A Unified Matrix Polynomial Approach to Modal Identification", Allemang, R.J., Brown,D.L., Proceedings, Indo-US Symposium on Emerging Trends in Vibration and Noise Engi-neer ing, IIT Dehli, India, Allied Publishers Limited, pp. 379-390, March 1996.

• "Utilizing the Modal Assurance Criter ion (MAC) in the Detection of Repeated Roots",Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, 6pp., 1996.

• "Single Degree-of-Freedom Modal Parameter Estimation Methods", Phillips, A.W., Alle-mang, R.J., Proceedings, Inter national Modal Analysis Conference, 9 pp., 1996.

• "Cyclic Averaging for Frequency Response Function Estimation", Allemang, R.J., Phillips,A.W., Proceedings, Inter national Modal Analysis Conference, pp. 415-422, 1996.

• "Chapter 21: Exper imental Modal Analysis", Shock and Vibration Handbook, FourthEdition, Harr is, C.M., Crede, C.E. (Editors), Allemang, R.J., Brown, D.L., McGraw-HillBook Company, 1996.

-12-


• "Estimation of Rigid Body Frequency Response Function Matrices via Redundant Per ime-ter Reference Measurements", Adams, D.E., Brown, D.L., Allemang, R.J., Proceedings, In-ter national Modal Analysis Conference, 10 pp., 1995.

• "A Test Analysis Matrix (TAM) with Improved Dynamic Character istics", Bhatia, S.S., Alle-mang, R.J., Proceedings, Inter national Modal Analysis Conference, 8 pp., 1995.

• "An Investigation of Online Vibration Parameter Estimation Schemes", Shelley, S.J., Alle-mang, R.J., NASA-Ames University Consortium, Number NCA2-734, 1994, 94 pp.

• "Direct Updating Based on Modal Filter Vectors", Wei, J.C., Allemang, R.J., Luk, Y.W., Pro-ceedings, Inter national Modal Analysis Conference, pp. 219-224, 1994.

• "Modal Parameter Estimation: A Unified Matrix Polynomial Approach", Allemang, R.J.,Brown, D.L., Fladung, W., Proceedings, Inter national Modal Analysis Conference, pp.501-514, 1994.

• "Condensation of the Spatial Domain in Modal Parameter Estimation", Dippery, K.D.,Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference, pp.818-824, 1994.

• "Spectral Decimation in Low Order Frequency Domain Modal Parameter Estimation", Dip-per y, K.D., Phillips, A.W., Allemang, R.J., Proceedings, Inter national Modal Analysis Con-ference, pp. 839-843, 1994.

• "Active Control of Vibration in Civil Engineering Structures", Shelley, S.J., Brown, D.L.,Allemang, R.J., Aktan, A.E., Proceedings, Inter national Modal Analysis Conference, pp.1121-1127, 1994.

• "Chapter 16: Exper imental Modal Analysis", Handbook on Experimental Mechanics,Second Edition, Kobayashi, A.S. (Editor), Allemang, R.J., Brown, D.L., Prentice Hall,1994.

• "Trends in Modal Identification", Proceedings, Korea-U.S. Vibration Engineering Seminar,U.S. National Science Foundation, Korea Science and Engineering Foundation, pp. 1-26,1993.

• "Modal Analysis - Where Do We Go From Here?", Allemang, R.J., Modal Analysis: TheInternational Journal of Analytical and Experimental Modal Analysis, Volume 8, Num-ber 2, pp. 79-91, 1993.

• "Modal Analysis - Where Do We Go From Here?", Allemang, R.J., Proceedings, Inter na-tional Modal Analysis Conference, (Ke ynote Address) 10 pp., 1993.

• "Active Vibration Control Utilizing an Adaptive Modal Filter Based Modal Control Method",Shelley, S.J., Allemang, R.J., Slater, G.L., Schultze, J.F., Proceedings, Inter national ModalAnalysis Conference, pp. 751-758, 1993.

• "Development of an On-Line Modal State Monitor", Shelley, S.J., Freudinger, L.C., Alle-mang, R.J., Proceedings, Inter national Modal Analysis Conference, pp. 606-612, 1993.

• "Str uctural Dynamic Testing and Instrumentation", Allemang, R.J., Brown, D.L., Flight Ve-hicle Materials, Structures and Dynamics - Assessment and Future Directions, Vol-ume 5, A.K. Noor, S.L. Venner i, Editors, ASME Publication I00326, 60 pp., 1993.

-13-


• "Improved Estimation of Modal Vector Scaling Using the Enhanced Frequency ResponseFunction", Wang, W., Allemang, R.J., Brown, D.L., Mechanical Systems and Signal Pro-cessing, Academic Press, Volume 6, Number 3, pp. 251-260, 1992.

• "Unbiased Estimation of Operating Shapes" Pan, J., Allemang, R.J., Vold, H., MechanicalSystems and Signal Processing, Academic Press, Volume 6, Number 3, pp. 275-285pp., 1992.

• "Active Vibration Control Utilizing a Discrete Modal Filter Based Control Technique", Shel-ley, S.J., Schultz, J.F., Rost, R.W., Allemang, R.J., Proceedings, 17th International Seminaron Modal Analysis, Katholieke Universiteit Leuven, Belgium, pp. 1747-1762, 1992.

• "Calculation of Discrete Modal Filters Using the Modified Reciprocal Modal VectorMethod", Shelley, S.J., Allemang, R.J., Proceedings, Inter national Modal Analysis Confer-ence, pp. 37-45, 1992.

• "Development of an On-line Parameter Estimation System Using the Discrete Modal Fil-ter", Shelley, S.J., Freudinger, L.C., Allemang, R.J., Proceedings, Inter national Modal Anal-ysis Conference, pp. 173-183, 1992.

• "Damping Matrix Estimation from Experimental and Analytical Data for Linking Analysisand Test", Wei, J.C., Luk, Y.W., Allemang, R.J., Proceedings, Inter national Modal AnalysisConference, pp. 625-631, 1992.

• "A Practical Application of Operating Shapes", Pan, J., Vold, H., Allemang, R.J., Proceed-ings, Inter national Modal Analysis Conference, pp. 1352-1358, 1992.

• "Active Damping Design of Flexible Structures Based on SISO and SIMO Non-CollocatedSensor-Actuator Velocity Feedback", Zhang, Q., Shelley, S., Allemang, R.J., ASME, Jour-nal of Dynamic Systems, Measurement and Control, Volume 113, Number 2, pp.259-266 pp., 1991

• "Modal Data For mats for Data Transfer : Standardization" Allemang, R.J., Proceedings, In-ter national Modal Analysis Conference, pp. 1407-1409, 1991.

• "An Application of Unbiased Estimation of Operating Shapes", Pan, J., Vold, H., Allemang,R.J., Proceedings, Inter national Modal Analysis Conference, pp. 226-232, 1991. Proceed-ings, Florence Modal Analysis Conference pp. 191-206, 1991.

• "Implementation of a Modal Filter on a Five Meter Truss Structure", Shelley, S.J.,Freudinger, L., Allemang, R.J., Zhang, Q., Proceedings, Inter national Modal Analysis Con-ference, pp. 1036-1044, 1991.

• "Practical Experience with Identification of Large Flexible Structures", Allemang, R.J.,Shelley, S.J., Brown, D.L., Zhang, Q., Proceedings, 1990 American Control Confer-ence , IEEE Catalog Number 90CH2896-9, Volume 2 of 3, 1990, pp. 1441-1444.

• "System Identification for Controls: A Modal Analysis Perspective", Allemang, R.J., Pro-ceedings, 15th International Seminar on Modal Analysis (ISMA), Katholieke UniversiteitLeuven, Belgium, 22 pp., 1990. (Keynote Address)

• "Exper ience with Experimentally Modeling Structure-Actuator-Sensor Systems for ControlDesign", Shelley, S.J., Allemang, R.J., Proceedings, 15th International Seminar on ModalAnalysis (ISMA), Katholieke Universiteit Leuven, Belgium, 15 pp., 1990.

-14-


• "Model Correlation and Orthogonality Criter ia Based Upon Reciprocal Modal Vectors",Wei, J.J.C., Allemang, R.J., Wang, W., Proceedings, 15th International Seminar on ModalAnalysis (ISMA), Katholieke Universiteit Leuven, Belgium, 10 pp., 1990.

• "Improved Estimation of Modal Vector Scaling Using the Enhanced Frequency ResponseFunction", Wang, W., Allemang, R.J., Brown, D.L., Proceedings, 15th International Semi-nar on Modal Analysis (ISMA), Katholieke Universiteit Leuven, Belgium, 15 pp., 1990.

• "Unbiased Estimation of the Operating Shapes" Pan, J., Vold, H., Allemang, R.J., Proceed-ings, 15th International Seminar on Modal Analysis (ISMA), Katholieke Universiteit Leu-ven, Belgium, 8 pp., 1990.

• "Suppression of Undesired Inputs of Linear Systems by Eigenspace Assignment", Zhang,Q., Slater, G., Allemang, R.J., AIAA, Journal of Guidance, Control, and Dynamics, Vol-ume 13, Number 2, March/April, 1990, pp. 330-336.

• "Video Sensing in Data Acquisition Systems" Rediers, B., Allemang, R., Carl, E., Greaves,J.O.B., Sound and Vibration, Volume 24, Number 1, pp. 6-14, Januar y, 1990.

• "Optimization of Structural Redesign with Dynamic Constraints", Wang, Weicher ng,Zhang, Qiang, Allemang, R.J., Brown, D.L., Proceedings, Inter national Modal AnalysisConference, pp. 946-953, 1990.

• "Modal Filter: Concept and Applications", Zhang, Qiang, Allemang, R.J., Brown, D.L., Pro-ceedings, Inter national Modal Analysis Conference, pp. 487-496, 1990.

• "An Analysis of the Monophase Operating Shapes of a Highly Damped Structure", Pan, J.,Vold, H., Allemang, R., Proceedings, Inter national Modal Analysis Conference, pp.290-294, 1990.

• "Operating Shape Estimation as a Function of Dynamic Loads", Pan, J., Vold, H., Alle-mang, R., Proceedings, Inter national Modal Analysis Conference, pp. 307-312, 1990.

• "Complex Mode Indication Function and its Application to Spatial Domain Parameter Esti-mation", Shih, C.Y., Tsuei, Y.G., Allemang, R., Brown, D.L., Proceedings, Inter nationalModal Analysis Conference, pp. 533-540, 1989.

• "A Comparison Between Monophase and Complex Representation of Operating Shapes",Pan, J., Shih, C.Y., Allemang, R., Proceedings, Inter national Modal Analysis Conference,pp. 790-796, 1989.

• "Exper imental Study of Active Vibration Control of Flexible Structures Subject to ForcedVibration", Zhang, Q., Shelley, S., Luo, X.N., Allemang, R., Brown, D.L., Proceedings, In-ter national Modal Analysis Conference, pp. 926-933, 1989.

• "Correction of Finite Element Model via Selected Physical Parameters", Wei, J.C., Zhang,Q., Allemang, R., Wei, M.L., Proceedings, Inter national Modal Analysis Conference, pp.1231-1238, 1989.

• "Prediction of Mass Modifications for Desired Natural Frequencies", Zhang, Qiang, Wang,Weicher ng, Allemang, R.J., Brown, D.L., Journal of Analytical and Experimental ModalAnalysis, Volume 4, Number 2, pp. 39-44, April 1989, Proceedings, Inter national ModalAnalysis Conference, pp. 1026-1032, 1988.

• "Force Identification by Using Principle and Modal Coordinate Transfor mation Methods",Shih, C.Y., Zhang, Q., Allemang, R.J., Twelfth Biennial ASME Conference , VibrationalAnalysis - Techniques and Applications, ASME DE-Volume 18-4, pp. 303-310, 1989.

-15-


• "Or thogonality Cr iter ion for Exper imental Modal Vectors", Zhang, Q., Shih, C.Y., Allemang,R.J., Twelfth Biennial ASME Conference , Vibrational Analysis - Techniques and Ap-plications, ASME DE-Volume 18-4, pp. 251-258, 1989.

• "Active Damping Design of Flexible Structures Based on Non-Collocated Sensor-ActuatorVelocity Feedback", Zhang, Q., Shelley, S., Lou, X.N., Allemang, R.J., 59th Shock and Vi-bration Symposium, 22 pp., 1988.

• "Classification Methods for Experimental Modal Analysis", Allemang, R.J., Proceedings,13th International Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 22pp., 1988.

• "An Equivalent Monophase Representation of Operating Shapes", Pan, J., Allemang, R.J.,Vold, H., Proceedings, 13th International Seminar on Modal Analysis, Katholieke Univer-siteit Leuven, Belgium, 8 pp., 1988.

• "Video Sensing in Data Acquisition Systems", Rediers, B., Allemang, R.J., Proceedings,13th International Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 21pp., 1988.

• "Complex Mode Indicator Function and its Application to Spatial Domain Parameter Esti-mation", Shih, C.Y., Tsuei, Y.G., Allemang, R.J., Brown, D.L., Proceedings, 13th Interna-tional Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 15 pp., 1988.

• "Correction of Finite Element Model via Selected Physical Factors", Wei, J.C., Zhang,Qiang, Allemang, R.J., Wei, M.L., Proceedings, 13th International Seminar on Modal Anal-ysis, Katholieke Universiteit Leuven, Belgium, 15 pp., 1988.

• "Complex Mode Indication Function and Its Application to Spatial Domain Parameter Esti-mation", Shih, C.Y., Tsuei, Y.G., Allemang, R.J., Brown, D.L., Journal of Mechanical Sys-tems and Signal Processing, Academic Press Limited, Volume 2, Number 4, pp.367-372, 1988.

• "A Frequency Domain Global Parameter Estimation Method for Multiple Reference Fre-quency Response Measurements", Shih, C.Y., Tsuei, Y.G., Allemang, R.J., Brown, D.L.,Journal of Mechanical Systems and Signal Processing, Academic Press Limited, Vol-ume 2, Number 4, pp. 349-365, 1988.

• "A Frequency Domain Global Parameter Estimation Method for Multiple Reference Fre-quency Response Measurements", Shih, C.Y., Tsuei, Y.G., Allemang, R.J., Brown, D.L.,Proceedings, Inter national Modal Analysis Conference, pp.389-396, 1988.

• "Active Vibration Control of Flexible Structures by Eigenvalue Assignment Techniques",Zhang, Q., Liu, Jim Y. H., Allemang, R.J., Tsuei, Y.G., Proceedings, Inter national ModalAnalysis Conference, pp. 1015-1019, 1988.

• "The Use of Modal Par ticipation Factors to Enhance Modal Vector Scaling", Wei, M.L.,Allemang, R.J., Brown, D.L., Proceedings, Inter national Modal Analysis Conference, pp.1020-1025, 1988.

• "Vibration Considerations Concerning Vehicular Seating Systems", Foley, D.E., Allemang,R.J., Proceedings, Inter national Modal Analysis Conference, pp. 1172-1175, Experimen-tal Techniques, Volume 12, Number 7, pp. 19-21, 1988.

-16-


• "Summar y of Technical Wor k", Experimental Modal Analysis and Dynamic ComponentSynthesis, Allemang, R.J., Brown, D.L., USAF Technical Report, Contract NumberF33615-83-C-3218, AFWAL-TR-87-3069, Volume 1, 1987.

• "Measurement Techniques for Experimental Modal Analysis", Experimental Modal Analy-sis and Dynamic Component Synthesis, Allemang, R.J., Brown, D.L., Rost, R.W., USAFTechnical Report, Contract Number F33615-83-C-3218, AFWAL-TR-87-3069, Volume 2,1987.

• "Modal Parameter Estimation" Experimental Modal Analysis and Dynamic ComponentSynthesis, Allemang, R.J., Brown, D.L., USAF Technical Report, Contract NumberF33615-83-C-3218, AFWAL-TR-87-3069, Volume 3, 1987.

• "System Modeling Techniques" Experimental Modal Analysis and Dynamic Compo-nent Synthesis, Allemang, R.J., Brown, D.L., Soni, M.L., USAF Technical Report, Con-tract Number F33615-83-C-3218, AFWAL-TR-87-3069, Volume 4, 1987.

• "Universal File For mats" Experimental Modal Analysis and Dynamic Component Syn-thesis, Allemang, R.J., Brown, D.L., USAF Technical Report, Contract NumberF33615-83-C-3218, AFWAL-TR-87-3069, Volume 5, 1987.

• "Software User’s Guide" Experimental Modal Analysis and Dynamic Component Syn-thesis, Allemang, R.J., Brown, D.L., USAF Technical Report, Contract NumberF33615-83-C-3218, AFWAL-TR-87-3069, Volume 6, 1987.

• "Improvement of Modal Scaling Factors Using Mass Additive Techniques", Zhang, Q., Wei,M.L., Allemang, R.J., Brown, D.L., 58th Shock and Vibration Symposium, 10 pp., 1987.

• "A New Method to Real Normalize Measured Complex Modes", Wei, M.L., Zhang, Q., Alle-mang, R.J., Brown, D.L., 58th Shock and Vibration Symposium, 12 pp., 1987.

• "A Time Domain Subspace Iterative Method for the Normalization of Measured ComplexModes", Wei, M.L., Zhang, Q., Allemang, R.J., Brown, D.L., Proceedings, 12th Internation-al Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 10 pp., 1987.

• "Enhancement of Modal Vector Scaling Using Modal Par ticipation Factors", Wei, M.L.,Allemang, R.J., Brown, D.L., Proceedings, 12th International Seminar on Modal Analysis,Katholieke Universiteit Leuven, Belgium, 7 pp., 1987.

• "Chapter 21: Exper imental Modal Analysis", Shock and Vibration Handbook, Third Edi-tion, Harr is, C.M., Crede, C.E. (Editors), Allemang, R.J., Brown, D.L., McGraw-Hill BookCompany, 1987.

• "Chapter 16: Exper imental Modal Analysis", Handbook on Experimental Mechanics,Kobayashi, A.S. (Editor), Allemang, R.J., Brown, D.L., Prentice Hall, 1987.

• "Real-Nor malization of Measured Complex Modes", Wei, M.L., Allemang, R.J., Brown,D.L., Proceedings, Inter national Modal Analysis Conference, pp. 708-712, 1987.

• "The Polyreference Time Domain Technique", Deblauwe, F., Allemang, R.J., Brown, D.L.,Proceedings, Inter national Modal Analysis Conference, pp. 832-845, 1987.

• "Modal Scaling Considerations for Structural Modification Application", Wei, M.L., Alle-mang, R.J., Brown, D.L., Proceedings, Inter national Modal Analysis Conference, pp.1531-1537, 1987.

-17-


• "Modal Analysis: Tw enty Years Back - Twenty Years Ahead", Allemang, R.J., Brown, D.L.,Sound and Vibration, Volume 21, Number 1, pp. 10-17, Januar y, 1987.

• "Analytical and Experimental Analysis on Inextensional Modes of a Circular Cylinder",Shen, C.L., Tsuei, Y.G., Allemang, R.J., Brown, D.L., Proceedings, 11th International Sem-inar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 13 pp., 1986, Interna-tional Journal of Analytical and Experimental Modal Analysis, October, 1986, Volume1, Number 4, pp. 26-32.

• "A Possible Origin of Complex Modal Vectors", Deblauwe, F., Allemang, R.J., Proceedings,11th International Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 10pp., 1986.

• "A Review of Modal Parameter Estimation Techniques", Technique", Allemang, R.J.,Brown, D.L., Proceedings, 11th International Seminar on Modal Analysis, Katholieke Uni-versiteit Leuven, Belgium, 13 pp., 1986.

• "Some Practical Considerations for the Polyreference Time Domain Technique", De-blauwe, F., Allemang, R.J., Proceedings, 11th International Seminar on Modal Analysis,Katholieke Universiteit Leuven, Belgium, 7 pp., 1986.

• "Str uctural Dynamic Modifications Using Mass Additive Technique", Wei, M.L., Allemang,R.J., Brown, D.L., Kanda, H., Proceedings, Inter national Modal Analysis Conference, 8pp., 1986.

• "Multiple-Input Experimental Modal Analysis", Allemang, R.J., Brown, D.L., InternationalJournal of Analytical and Experimental Modal Analysis, Januar y, 1986, Volume 1,Number 1, pp. 37-44.

• "Multiple-Input Experimental Modal Analysis", Allemang, R.J., Brown, D.L., ExperimentalTechniques, pp. 16s-23s, October, 1985.

• "Time Domain Parameter Identification Methods for Linear Modal Analysis: A Unifying Ap-proach", Leuridan, J.M., Brown, D.L., Allemang, R.J., ASME Paper Number 85-DET-90,ASME Transactions, Journal of Vibration, Acoustics, Stress, and Reliability in De-sign, 8 pp., 1985.

• "The Polyreference Time Domain Technique", Deblauwe, F., Allemang, R.J., Proceedings,10th International Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 39pp., 1985.

• "Recent Advances in Multiple Input Frequency Response Function Estimation: Multi-Mac",Rost, R.W., Allemang, R.J., Brown, D.L., Proceedings, 10th International Seminar onModal Analysis, Katholieke Universiteit Leuven, Belgium, 19 pp., 1985.

• "A Polyreference Frequency Domain Method for Modal Parameter Identification", Zhang,L., Kanda, H., Brown, D.L., Allemang, R.J., ASME Paper Number 85-DET-106, 6 pp.,1985.

• "The Extraction of Valid Residue Ter ms Using the Polyreference Technique", Crowley,S.M., Brown, D.L., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference,8 pp., 1985.

• "Averaging for Improved Frequency Response Functions", Van Karsen, C., Allemang, R.J.,Sound and Vibration, Volume 18, Number 8, pp. 18-26, August, 1984.

-18-


• "Multiple Input Estimation of Frequency Response Functions for Experimental Modal Anal-ysis", Allemang, R.J., Brown, D.L., Rost, R.W., U.S. Air Force Report Number AFATL-TR-84-15, 185 pp., 1984.

• "Multiple Input Estimation of Frequency Response Functions", Allemang, R.J., Rost, R.W.,Brown, D.L., Proceedings, Inter national Modal Analysis Conference 10 pp., 1984.

• "An Estimation Method for Rotational Degrees of Freedom Using a Mass Additive Tech-nique", Yasuda, C., Riehle, P.J., Brown, D.L., Allemang, R.J., Proceedings, Inter nationalModal Analysis Conference 10 pp., 1984.

• "Single and Multiple Input Modal Analysis: A Compar ison of Averaging Techniques", VanKarsen, C., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference 7 pp.,1984.

• "Applications of the Poly Reference Technique in Experimental Modal Analysis", Crowley,S.M., Allemang, R.J., Proceedings, Inter national Modal Analysis Conference 7 pp., 1984.

• "Multiple Input Experimental Modal Analysis" Allemang, R.J., Brown, D.L., Society for Ex-per imental Stress Analysis, Fall Technical Meeting, Salt Lake City, Utah, 19 pp., 1983.

• "Multiple Input Estimation of Frequency Response Functions: Excitation Considerations",R.J. Allemang, R.W. Rost, D.L. Brown, ASME Paper Number 83-DET-73.

• "Exper imental Modal Analysis", R.J. Allemang, Modal Testing and Model RefinementSymposium, ASME AMD Volume Number 59, pp. 1-29, 1983.

• "Improvement of the Accuracy of Modal Parameters by Use of Enhanced Frequency Re-sponse Functions", Okubo, N., Honda, S., Allemang, R.J., Brown, D.L., Proceedings, 8thInter national Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 11 pp.,1983.

• "The Enhanced Frequency Response Function" Allemang, R.J., Proceedings, 8th Interna-tional Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 33 pp., 1983.

• "Direct System Parameter Identification of Mechanical Structures with Applications toModal Analysis", Leuridan, J.M., Allemang, R.J., Brown, D.L., Proceedings, 8th Interna-tional Seminar on Modal Analysis, Katholieke Universiteit Leuven, Belgium, 9 pp., 1983.

• "Improved Parameter Estimation Techniques for Experimental Modal Analysis", R.D. Zim-mer man, D.L. Brown, R.J. Allemang, Final Report: NASA Grant NSG-1486, NASA-LangleyResearch Center, 23 pp., 1982

• "A Correlation Coefficient for Modal Vector Analysis", R.J. Allemang, D.L. Brown, Proceed-ings, Inter national Modal Analysis Conference, pp.110-116, 1982.

• "Dual Input Estimation of Frequency Response Functions for Experimental Modal Analysisof Aircraft Structures", R.J. Allemang, R.W. Rost, D.L. Brown, Proceedings, Inter nationalModal Analysis Conference, pp.333-340, 1982.

• "Application of Dual Input Excitation Techniques to the Modal Testing of Commercial Air-craft", G.D. Carbon, D.L. Brown, R.J. Allemang, Proceedings, Inter national Modal AnalysisConference, pp.559-565, 1982.

• "Exper imental Modal Analysis Bibliography", R.J. Allemang, Proceedings, Inter nationalModal Analysis Conference, pp.714-726, 1982.

-19-


• "Direct System Parameter Identification of Mechanical Structures With Application toModal Analysis", J. Leur idan, D.L. Brown, R.J. Allemang, AIAA Paper Number82-0767-CP.

• "Dual Input Estimation of Frequency Response Functions for Experimental Modal Analysisof Automotive Str uctures", R.J. Allemang, D.L. Brown, R.W. Rost, SAE Paper Number820193.

• "Exper imental Modal Analysis", R.J. Allemang, University of Cincinnati, College of Engi-neer ing, Research Annals, Volume 82, Number MIE-111, 32 pp., 1982.

• "Deter mining Str uctural Character istics from Response Measurements", R.J. Allemang,D.L. Brown, R.D. Zimmer man, University of Cincinnati, College of Engineering, ResearchAnnals, Volume 82, Number MIE-110, 39 pp., 1982.

• "Techniques for Reducing Noise in Frequency Response Function Measurements", R.J.Allemang, D.L. Brown, R.D. Zimmer man, University of Cincinnati, College of Engineering,Research Annals, Volume 82, Number MIE-112, 56 pp., 1982.

• "Using Dual Input Random Excitation Experimental Modal Analysis", R.J. Allemang, et al,University of Cincinnati, College of Engineering, Research Annals, Volume 82, NumberMIE-113, 171 pp., 1982.

• "Investigation of Some Multiple Input/Output Frequency Response Function ExperimentalModal Analysis Techniques",R.J. Allemang, Doctor of Philosophy Disser tation, Universityof Cincinnati, Mechanical Engineering Department, 1980, 358 pp.

• "Parameter Estimation Techniques for Modal Analysis", D.L. Brown, R.J.Allemang, R.D.Zimmer man, M. Mergeay, SAE Paper Number 790221, SAE Transactions, Volume 88,pp. 828-846, 1979.

• "Trends in Vibration/Acoustic Testing Technology", R.J. Allemang, Engineers and Scien-tists of Cincinnati Magazine , Vol. 3, No. 1, 1978.

• "Modal Analysis Techniques Applicable to Acoustic Problem Solution", D.L. Brown, R.J.Allemang, Inter Noise 1978, Proceedings, pp. 909-914, 1978.

• "Using Modal Techniques to Guide Acoustic Signature Analysis", R.J. Allemang, W.R.Shapton, SAE Paper Number 780106, SAE Transactions, Volume 87, 1978.

• "Acoustic Modal Analysis for Crack Detection in Powdered Metal Par ts", W.R. Shapton,R.J. Allemang, SAE Paper Number 770028.

• "Per ipheral Nerve Decoding", I.E. Morse, C.P. Olinger, P.M. Flanagan, R.J. Allemang, W.E.Harr ison, University of Cincinnati, First Biomedical Engineering Symposium, May 22,1976.

• "Dynamic Character istics of Rotating and Non-Rotating Machine Tool Spindles", R.J. Alle-mang, T. Graef, C.D. Pow ell, ASME Paper Number 73-DET-29, ASME Transactions,Journal of Engineering for Industry, Vol. 96, Series B, No. 1, pp. 343-347, 1974.

-20-


GRANTS AND CONTRACTS

• "Full-Field Experimental Measurement Techniques for Coupled Fluid-Structure ModelValidation", DAGSI RQ-UC-15-9-OC4-AFRL, Grant Number: 1012130, PhD Student Support(Timothy Beber niss), 08/24/2016 to 08/23/2017, $33,140, Renewal, PI 100% effor t

• "Full-Field Experimental Measurement Techniques for Coupled Fluid-Structure ModelValidation", DAGSI RQ-UC-15-9-OC4-AFRL, Grant Number: 1012130, PhD Student Support(Timothy Beber niss), 08/24/2015 to 08/23/2016, $33,140, PI 100% effor t

• Joint Technology Development Program, "Aeromechanics Modeling - Phase IV",General Electric Company - UCRI, 2015, $250,129.00,Co-PI, 30% effor t, (w/ Phillips, Kim)

• Joint Technology Development Program, "Aeromechanics Modeling - Phase III",General Electric Company - UCRI, 2014, $310,000.00,Co-PI, 30% effor t, (w/ Phillips, Kim)

• "Modal Analysis Flutter Support 2013",The Boeing Company, 2013, $75,000.00,Co-PI, 10% effor t, (w/ Phillips)

• Joint Technology Development Program, "Aeromechanics Modeling - Phase II",General Electric Company - UCRI, 2013, $218,000.00,Co-PI, 30% effor t, (w/ Phillips, Kim)

• Joint Technology Development Program, "Aeromechanics Modeling - Phase I",General Electric Company - UCRI, 2012, $65,000.00,Co-PI, 30% effor t, (w/ Phillips, Kim)

• "Alter native Methods for Determining Painted Body Stiffness",BMW Manufactur ing Company, LLC, 2012-2013, $90,082.00,Co-PI, 80% effor t, (w/ Phillips)

• "Modal Analysis Flutter Support 2012",The Boeing Company, 2012, $75,000.00,Co-PI, 90% effor t, (w/ Phillips)

• "X-Modal Data Acquisition Enhancement VTEXDigitizer Support", VTI Instruments,2011-2012, $63,000.00, Co-PI, 50% effor t, (w/ Allyn Phillips).

• "Skeleton Sled Structural Dynamics Modeling and Testing", United States OlympicCommittee (USOC), 2011, $24,000.00, (Co-PIs,Schaffner,Phillips),Contr ibuting Investigator.

• "X-Modal General Usability and Perfor mance Improvements 2011", The Boeing Company,$25,000.00,Co-Pr incipal Investigator (w/ Allyn Phillips).

• "Dynamic Signal Archive (DSA) Standard Programming Environment", DOE/Y-12 Babcockand Wilcox, 2010-2011, $95,335,Co-Pr incipal Investigator (w/ Allyn Phillips).

• "Development of Draft Requirements for Data Archive For mat for Long Ter m Storage ofDynamic Signal Data - FY10", DOE/Y-12, Babcock & Wilcox, 2010, $95,903,Co-Pr incipal Investigator (w/ Allyn Phillips)

-21-


• "Automated Modal Analysis Support 2010", The Boeing Company, 2010, $75,000,Co-Pr incipal Investigator (w/ Allyn Phillips)

• "X-Modal General Usability and Perfor mance Improvements 2010", The Boeing Company,2010, $25,000,Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Development of Draft Requirements for Data Archive For mat for Long Ter m Storage ofDynamic Signal Data - FY09",DOE/Y-12, Babcock & Wilcox, 2009, $112,247,Co-Pr incipal Investigator (w/ Allyn Phillips)

• "X-Modal General Usability and Perfor mance Improvements 2009",The Boeing Company, 2009, $25,000,Co-Pr incipal Investigator (w/ Allyn Phillips)

• "X-Modal Automated Modal Analysis Support 2009",The Boeing Company, 2009, $75,000,Co-Pr incipal Investigator (w/ Allyn Phillips)

• "UC-SDRL Industry/University Consortium in Experimental Structural Dynamics",UC-SDRL Consortium, 2008-2010, $52,500Pr incipal Investigator

• "Engineer ing Education through Degree-long Project Experience",National Science Foundation, CCLI Program, 2007-2009, $150,000Co-Pr incipal Investigator (w/ Jay Kim, Teik Lim, Bob Rost).

• "Development of Draft Requirements for Data Archive For mats for Long-Ter mStorage of Dynamic Signal Data"DOE/Y-12, Babcock & Wilcox, 2008, $100,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Modal Analysis Seminar and Wor kshop"The Boeing Company, 2008, $14,538Co-Pr incipal Investigator (w/ Allyn Phillips)

• "X-Modal Structural Analysis Software Enhancement 2008 - General Usability andPerfor mance Improvements",The Boeing Company, 2008, $27,500Co-Pr incipal Investigator (w/ Allyn Phillips)

• "X-Modal Structural Analysis Software Enhancement 2008 - Automated Modal Analysis Support"The Boeing Company, 2008, $75,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Modal Parameter Estimation Techniques Demonstration Software"Br uel & Kjaer, 2007-2008, $50,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "CSA Fast GVT Support",CSA Engineering, Inc., 2007, $15,000Co-Pr incipal Investigator (w/ Allyn Phillips)

-22-


• "X-Modal Structural Analysis Software Enhancement: Flight Flutter TestingSuppor t-Cost Extension"The Boeing Company, 2007, $35,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "X-Modal Structural Analysis Software Enhancement: Flight Flutter Testing Support"The Boeing Company, 2007, $65,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Squeak and Rattle Analysis"The Ford Motor Company, University Research Grant, 2007, $40,000Pr incipal Investigator

• "Squeak and Rattle Analysis"The Ford Motor Company, University Research Grant, 2006, $40,000Pr incipal Investigator

• "Improved Parameter Identification for Flight Flutter and Transient Excitation Data"The Boeing Company, 2006, $65,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Improved Parameter Identification for Flight Flutter and Transient Excitation Data"The Boeing Company, 2005, $50,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Shock/Vibration Testing of Penetrator : Phase I"General Dynamics, 2004, $30,000Pr incipal Investigator

• "Str uctural Analysis Software Enhancement"The Boeing Company, 2004, $70,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Transient Excitation Data Processing Support"The Boeing Company, 2004, $25,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Str uctural Analysis Software Development: XMODAL 2.0, Experimental Modal Analysis"The Boeing Company, 2003, $130,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "NVH Feasibility Study: Exper imental Modal and Impedance Modeling Evaluation ofAutomotive Str uctures"The Goodyear Tire and Rubber Company, 2002-2003, $75,229Pr incipal Investigator



-23-


• "Str uctural Analysis Software Development: Operating Data Enhancement"Manta Corporation, 2000-2001, $30,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Str uctural Analysis Software Development: Operating Data Enhancement"Manta Corporation, 1999-2000, $30,000Co-Pr incipal Investigator (w/ Allyn Phillips)




• "Str uctural Analysis Software Development: Data Display Enhancement"The Boeing Company, 1999, $50,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Flutter Analysis - Phase III: Advanced Parameter Estimation"The Boeing Company, 1998, $70,634Co-Pr incipal Investigator (w/ Stuart Shelley, Allyn Phillips)

• "XMODAL 2.0, Experimental Modal Analysis"The Boeing Company, 1998, $180,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "Evaluation of Brake Squeal"Akebono BSEC, 1997-1999, $80,000Co-Pr incipal Investigator (w/ Jay Kim, Robert Wynn)

• "Advanced Instrumentation for Machinery Acoustics and Vibration Research",Ohio Board of Regents Investment Fund, $1,682,320 ($600,000 to UC)Co-Pr incipal Investigator (w/ Professor Raj Singh of Ohio State University)

• "XMODAL, Experimental Modal Analysis, Phase VII (Enhancement)"The Boeing Company, 1997, $140,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "XMODAL, Flutter Analysis, Phase II (Enhancement)"The Boeing Company, 1997, $70,453Co-Pr incipal Investigator (w/ Stuart Shelley, Allyn Phillips)

• "Evaluation of Brake Squeal"Akebono BSEC, 1996-1997, $80,000Co-Pr incipal Investigator (w/ Jay Kim, Robert Wynn)

• "XMODAL, Experimental Modal Analysis, Phase VI (Enhancement)"The Boeing Company, 1996, $140,000Co-Pr incipal Investigator (w/ Allyn Phillips)

-24-


• "XMODAL, Flutter Analysis, Phase I (Enhancement)"The Boeing Company, 1996, $65,951Co-Pr incipal Investigator (w/ Stuart Shelley, Allyn Phillips)

• "XMODAL, Experimental Modal Analysis, Phase V (Enhancement)"The Boeing Company, 1995, $99,930Co-Pr incipal Investigator (w/ Allyn Phillips)

• "XMODAL, Flutter Analysis, Feasibility Study"The Boeing Company, 1995, $39,993Co-Pr incipal Investigator (w/ Stuart Shelley, Allyn Phillips)

• "XMODAL, Experimental Modal Analysis, Phase IV (Enhancement)"The Boeing Company, 1994, $99,714Co-Pr incipal Investigator (w/ Allyn Phillips)

• "XMODAL, Flutter Analysis, Feasibility Study"The Boeing Company, 1994, $38,950Co-Pr incipal Investigator (w/ Stuart Shelley, Allyn Phillips)

• "XMODAL, Experimental Modal Analysis, Phase III (Implementation)"The Boeing Company, 1993, $98,000Co-Pr incipal Investigator (w/ Allyn Phillips)

• "An Investigation of On-Line Vibration Parameter Estimation Schemes"NASA-Ames University Consortium, 1992-1993, $40,000Co-Pr incipal Investigator (w/ Stuart Shelley)

• "XMODAL, Experimental Modal Analysis, Phase II (Implementation)-Cost Extension"The Boeing Company, 1992, $9,563Pr incipal Investigator

• "XMODAL, Experimental Modal Analysis, Phase II (Implementation)"The Boeing Company, 1992, $100,000Pr incipal Investigator

• "XMODAL, Experimental Modal Analysis, Phase I (Feasibility)"The Boeing Company, 1991, $50,000Pr incipal Investigator

• "Exper imental Correlation/Correction of FEA Models"General Motors Corporation, Cadillac Motor Car Division, 1991-1992, $28,521Pr incipal Investigator

• "On-Line Parameter Estimation Using the Discrete Modal Filter"NASA-Ames University Consortium, NCA2-642, 1991-1992, $15,000Pr incipal Investigator

• "Exper iments in Multivar iable Identification and Control"NASA-Langley Research Center, CSI Program, 1989-1990, $359,000Co-Pr incipal Investigator (w/ G.L. Slater)

• "Evaluation of Modal Testing and Model Refinement Technology"NASA-Langley Research Center, 1989, $52,000Co-Pr incipal Investigator (w/ D.L. Brown)

-25-


• "Exper imental Modal Analysis Support - US-WPAFB"Technical Science Services, Inc., 1988-1989, $32,000Pr incipal Investigator

• "Exper imental Modal Analysis Support - US-WPAFB"Technical Science Services, Inc., 1987-1988, $42,000Pr incipal Investigator

• "Control of Flexible Space Structures"State of Ohio - University of Cincinnati, Research Challenge Program, 1987-1988, $100,000Co-Pr incipal Investigator (w/ D.L. Brown)

• "Exper imental Modal Analysis and Dynamic Component Synthesis"USAF/Wr ight-Patterson Flight Dynamics Laborator y -USAF/Eglin Structural Dynamics Laborator y, 1983-1988, $514,145Pr incipal Investigator

• "Modal Surve y of a Complete Truck Tractor"Navistar, Inter national, 1985-86, $15,000Co-Pr incipal Investigator (w/ R.W. Rost)

• "Dynamic Var iation of Automotive Str uctures"Fisher Body Division, General Motors Corporation, 1984-1985, $150,000.00Pr incipal Investigator

• "Multiple Input Estimation of Frequency Response Functions"Str uctural / Kinematics, 1983, $12,000Pr incipal Investigator

• "Investigation of Improved Modal Parameter Estimation Procedures"NASA Marshall Space Flight Center, 1981-1983, $50,126Research Advisor

• "Exper imental Modal Analysis of Competitive Automotive Str uctures"Fisher Body Division, General Motors Corporation, 1982, $33,400Pr incipal Investigator

• "Using Multiple Input Random Excitation Experimental Modal Analysis"USAF, Eglin Structural Dynamics Laborator y, 1981-1983, $83,900Pr incipal Investigator

• "Dual Input Frequency Response Function Estimation"USAF, Eglin Structural Dynamics Laborator y, 1980-1981, $55,100Co-Pr incipal Investigator (w/ D.L. Brown)

• "Modal Parameter Estimation"NASA-Langley Research Center, 1978-1980, $122,200Research Staff

• "Optimum Ground Vibration Test Method"The Boeing Company, 1978-1980, $41,600Research Staff

• "Wind-Turbine Modal Surve y"NASA-Lewis Research Center, 1979, $9,500Research Staff

-26-


• "XFV-12A Experimental Aircraft Modal Surve y"Rockwell, North American, 1977, $15,000Research Staff

• "Floor Vibration Character istics of Existing Manufactur ing Str uctures"Hewlett Packard Company, 1975-1977, $9,000Pr incipal Investigator

• "Wind Turbine Modal Surve y"NASA-Lewis Research Center, 1975, $8,800Research Staff

-27-


INVITED LECTURES AND SEMINARS

2015 "Practical Data Acquisition and Experimental Modal Analysis",NASA-Marshall Space Flight Center

2014 "A Pr incipal Component Analysis (PCA) Decomposition Based Validation Metric forUse with Full Field Measurement Situations", Second International Wor kshop onValidation of Computational Mechanics Models, London, England.

2014 "The Impact of Consumer Electronics on Structural Testing and Measurement",EES Research Division Lecture Series, Oak Ridge National Labs, Oak Ridge, TN.

2014 "Validation Metrics and QMU", Graduate Seminar Series, Vanderbilt University,Nashville, TN.

1995-2010, 2012 "Modal Analysis: Theor y and Application", Society for ExperimentalMechanics, Inc.

2009 "Practical Data Acquisition and Experimental Modal Analysis",NASA-Glenn Research Center

2009 "History of the UC-SDRL", Penn State University,Center for Acoustics and Vibration

2008 "Practical Data Acquisition and Experimental Modal Analysis",NASA-Marshall Space Flight Center

2008 "Modal Analysis Seminar and Wor kshop",The Boeing Company

2007 "Experimental Measurements and Modal Analysis", Raytheon Missile Systems2007 "Measurements and Methods for Structural Dynamics", Agilent2006 "Measurements and Methods for Structural Dynamics", Agilent2005 "Excitation Methods for Structural Dynamic Testing", ONERA, Par is, France1978-2002 "Modal Analysis", Katholieke Universiteit te Leuven (Belgium)1999-2002 "Modal Parameter Estimation: The Unified Matrix Polynomial Approach (UMPA)",

The Boeing Company2000 "OSU-UC Str uctural Dynamics Collaboration", OSU Board of Trustees1998 "Noise and Vibration Testing in the Next Century", MTS/SDRC Ideas Users Conference

(Tokyo, Japan)1997 "UC - Str uctural Dynamics Research Lab", JMAC (Tokyo, Japan)1997 "Virtual Measurements in Experimental Modal Analysis",

Brazilian Congress of Engineering Mechanics1996 "Modal Analysis and Modal Parameter Estimation", University of Kassel (Kassel Germany)1996 "Modal 2000: Vision of the Future", Japan Modal Analysis Conference (Tokyo, Japan)1996 "Trends in Modal Identification", National Science Foundation,

Indo-U.S. Vibration Engineering Seminar, Indian Institute of Technology (Dehli, India)1995 "Modal Analysis: Theory and Application",

BMW/Rolls Royce Aero Engines (Frankfur t, Ger many)1995 "Advanced Modal Parameter Estimation",

GM Technical Education Program (Milford, Michigan)1994 "X-Modal: Implementation of Unified Matrix Polynomial Approach (UMPA)

Modal Parameter Estimation", Sandia National Laborator ies1994 "Modal Analysis: Theory and Application",

Society for Experimental Mechanics, Inc. (Cincinnati, Ohio)

-28-


1993 "Modal Identification: Close or Repeated Modal Frequencies",Ohio State University, Mechanical Engineering Seminar Series

1993 "Experimental Modal Analysis", SDRC/ZONIC/PCB Seminar (Seoul, Korea)1993 "Trends in Modal Identification", National Science Foundation,

Korea-U.S. Vibration Engineering Seminar, KAIST (Taejon, Korea)1993 "Modal Analysis: Where do we go from here?",

11th International Modal Analysis Conference (Orlando, Flor ida)1992 "Modal Filter ing: System Identification in the Spatial Domain",

ISMES International Seminar on Structural Identification, Bergamo, Italy1991 "Current Research in Experimental Modal Analysis",

Three University Seminar, (Tokyo, Japan)1990 "System Identification for Controls: A Modal Analysis Perspective",

Ke ynote Address, 15th International Seminar on Modal Analysis,Katholieke Universiteit te Leuven (Belgium)

1989 "Numerical Conditioning of Modal ParameterEstimation Methods", University of Califor nia (Ir vine)

1989 "Experimental Modal Analyis", Sigma Xi Young InvestigatorAw ard Lecture, University of Cincinnati

1988 "Current Research in Experimental Modal Analysis",Three University Seminar, (Tokyo, Japan)

1988 "Spatial Domain Sine Testing", University of Califor nia (Ir vine)1987-1988 "Structural Dynamic Modeling Techniques",University of Lowell1987 "Experimental Modal Analysis Errors", SAE1986 "Problems Inherent in the Utilization of the FFT", ASA1985 "Experimental Modal Analysis", Naval Postgraduate School1983-1985 "Experimental Modal Analysis", Leuven Measurements

and Systems, Par is, France1981-1985 "Experimental Modal Analysis", Tokyo, Japan1984 "Experimental Modal Analysis", University of Delaware1982 "Modal Parameter Estimation", Continuing Education Institute1982 "Multiple Input Testing", Par is, France1982 "Multiple Input Testing", Ohio State University1982 "Multiple Input Testing", University of Texas (Austin)1981 "Experimental Modal Analysis", Hsinchu, Republic of China1981 "Experimental Modal Analysis", General Motors Corporation1981 "Experimental Modal Analysis", 1981 ASME Design Conference1978-1980 "Digital Signal Processing", University of Cincinnati1980 "Modal Analysis", Michigan Technological University1979 "Determining Structural Character istics from Response Measurements",

ASME Winter Annual Meeting1978 "Modal Analysis", Hewlett-Packard Company1978 "Impulse Technique for Structural Frequency Response

Testing", Acoustical Society of America, 95th Meeting1978 "Digital Signal Processing", Engineering Society of Cincinnati

-29-


HONORS AND AWARDS

2016 Cohen Aw ard Nomination, University of Cincinnati (UC)2015 Cohen Aw ard Nomination, University of Cincinnati (UC)2013 ASEE/USAF Summer Faculty Fellowship (2.5 Months)2013 Keynote Speaker, ICEDyn 2013, Sesimbra, Por tugal2012 Outstanding Educator Award, Cincy Magazine (April 2012)2012 ASEE/USAF Summer Faculty Fellowship (2 Months)2011 ASEE/USAF Summer Faculty Fellowship (3 Months)2011 Robert Hundley Award, School of Dynamics Systems (SDS),

University of Cincinnati (UC)2011 Barbour Aw ard Nominee, University of Cincinnati (UC)2010 Fellow Status, Society of Experimental Mechanics2010 Fellow Status, Amer ican Society of Mechanical Engineers2009-2010 Master Educator, College of Engineering, University of Cincinnati2009 Fellow Status, Society of Automotive Engineers2004-2005 BP Faculty Excellence Award, Mechanical Engineering, University of Cincinnati1998 DeMichele Aw ard, Society of Experimental Mechanics (SEM)1997 Keynote Speaker, Brazilian Congress of Engineering Mechanics,1997 Barbour Aw ard Nominee, University of Cincinnati (UC)1996 Keynote Speaker, Japan Modal Analysis Conference (JMAC), Tokyo, Japan1993 Keynote Speaker, Eleventh International Modal Analysis Conference (IMAC)

Or lando, Flor ida1990 Keynote Speaker, Fifteenth International Seminar on Modal Analysis (ISMA)

Leuven, Belgium1989 Sigma Xi, Young Investigator Research Award, University of Cincinnati1984 Teetor Educational Award, Society of Automotive Engineers1980-1981 Post-Doctorate Scholarship, Katholieke Universiteit te Leuven, Belgium1980 Outstanding Educator, Mechanical Engineering, University of Cincinnati1978 Summer Scholarship, Katholieke Universiteit te Leuven, Belgium1972-1976 University Scholarship, University of Cincinnati1972 Chrysler Scholarship, University of Cincinnati1972 Outstanding Senior Engineer, University of Cincinnati1972 Graduate Magna Cum Laude, University of Cincinnati

-30-


CONSULTING ACTIVITIES

2011-2014 Universal Technology Corporation (WPAFB, US-AFRL-SSC)2007-2010 General Dynamics Infor mation Technology (WPAFB, US-AFRL-SSC)2007-2008 Holland & Knight2006-2007 VXI Technology2006-2007 Agilent Cor poration2004-2007 Bruel & Kjaer2004-2005 Experimental Design and Analysis Solutions (EDAS)1993,1995-96 Procter and Gamble1992-1995 Cincinnati Milacron1987-1989 McAlpine and Hordo1982-1988 The Boeing Company1987 Anatrol1986 Hughes, Inc.1985 Hewlett-Packard Company1981-1985 Structural / Kinematics1983-1985 Leuven Measurements and Systems (Belgium)1982-1983 Continuing Education Institute1982 Structural Measurement Systems, Inc.1976-1981 Structural Dynamics Research Corporation1981 Rockwell International, Energy Systems Group1976,1981-82 Westinghouse, Mar ine Division1976-1981 Cincinnati Milacron1980 Caterpillar Tractor Company1979-1980 The Black Clawson Company1979 General Motors, Truck and Coach Division1978-1979 Pratt & Whitney Aircraft1978-1979 Industrial Air, Inc.1976-1978 Burgmaster-Houdaille1977 General Tire Company1977 Raytheon Company, Missile Systems1977 Chevrolet Engineering Center1977 NASA-Marshall Space Flight Center1976 Kerr-McGee Company, Potash Division1975 Rockwell International, Bethany Aircraft Division1975 Brunswick Cor poration

-31-


EQUIPMENT GRANTS

The following equipment grants represent successful proposals written by R.J. Allemang, D.L.Brown and R.W. Rost to benefit the College of Engineering (COE), the Mechanical and Industri-al Engineering (MIE) Department, and/or the Structural Dynamics Research Laborator y (UC-SDRL).

Year Company Equipment Value Benefit

2000 Agilent Technologies $ 55,000 UC-SDRL

1999 Agilent Technologies $ 25,000 UC-SDRL

1997 Ohio Board of Regents $600,000 UC-SDRL

1994 Hewlett Packard Company $ 39,769 UC-SDRL



1990 Hewlett Packard Company $720,653 UC-SDRL



1988 Hewlett Packard Company $341,782 MIE

1987 Hewlett Packard Company $316,475 COE




-32-


UNIVERSITY OF CINCINNATI ACTIVITIES

COURSES TAUGHT:

• Mechanics (Statics)

• Mechanics (Dynamics)

• Kinematics of Machines

• Dynamics of Machines

• Kinematics and Dynamics of Machines

• Measurements and Instrumentation

• Vibrations I, II, III

• Vibrations III Lab

• Exper imental Vibrations

• Automotive Design I, II, III

• Advanced Mechanical Design I, II, III

• Four ier Tr ansfor m Techniques

• System Dynamics Analysis I, II, III

• Str uctures/Motion Lab

• Advanced Vibrations I

• Advanced Vibrations II

• Exper imental Methods: Nonlinear Vibrations

• Exper imental Methods: Rotating Systems

GRADUATE WORK DIRECTED:

Master’s Doctorate Institution

Number Currently in Progress 5 3 University of CincinnatiNumber Directed to Completion (Chair) 60 14 University of CincinnatiNumber Directed to Completion (Committee) 128 50 University of Cincinnati

- 1 University of LeuvenTotal Number of Examining Committees 193 68

-33-


MASTER’S THESIS DIRECTED:

YEAR STUDENT MASTER’S THESIS TITLE

1984 Steven M. Crowley Advanced Techniques for Estimating ModalParameters

1985 Dennis Suliscz A Sur vey of System Modeling Techniques

1986 Filip Deblauwe Applications of the Polyreference Time DomainTechnique

1986 Jeff Poland An Evaluation of a Low-Cost Accelerometer ArraySystem: Advantages and Disadvantages

1986 Kenjiro Fukuzono Investigation of Multiple-Reference Ibrahim TimeDomain Modal Parameter Estimation Techniques

1987 Charles Van Karsen A Sur vey of Excitation Techniques for FrequencyResponse Function Measurement

1987 Greg Hopton Detecting Nonlinear ities Utilizing the MultipleInput Frequency Response Function Estimation Theory

1988 Phil Weber Correlating Operating Data with Modal Testing:An Automotive Application

1988 Colin Wear ing Pr incipal Component Analysis and Phase Maximizationof Operating Data

1990 Lawrence C. Freudinger Analysis of Structural Response Data Using DiscreteModal Filters

1991 Scott D. Tucker Principal Response Analysis

1993 Kyle D. Dipper y Methods of Reducing the Size of the Low Order MatrixPolynomial Frequency Domain Parameter EstimationProblem in Modal Analysis

1993 Christopher Richards A Study of Passive Low-Stiffness Suspension Devices

1995 Amit Zutshi Optimal Lumped Structural Modifications Using FrequencyResponse Functions

1998 Sundeep S. Bhatia Coupling of Substructures for Dynamic Analysis

1998 Sarah Beth Gross A Study in Automatic Splicing

-34-


2003 John Kantura Test Rig Design and Evaluation: Character izing Nonlinear ityof Friction Joint

2003 Doug Coombs Detection of Structural Nonlinearities Using CombinedCoherence

2004 Dan Lazor Considerations for Using the Dynamic Inertia Method inEstimating Rigid Body Inertia Properties

2005 Sergey Bograd Application of Transfer Path Analysis to Hydraulic Systems

2005 Daniel Alford Lightweight, Low Cost, Automotive Data Acquisition andTelemetr y System

2005 Siddharth Sinha Techniques for the Real Normalization of Complex ModalParameters for Updating and Correlation with FE Models

2005 Eric Frenz Acoustic Evaluation of a Hydraulic Road Simulator

2005 Uday Godbole Vehicle Road Test Vibration Simulation Using An Iterative,Closed Loop Control Algorithm

2005 Suresh Babu Chennagowni Study of the Effect of Mass Distribution, Path of Energy andDynamics Coupling on Combined Coherence (A NonlinearityDetection Method)

2005 Dhanesh Purekar Experimental Correlation of Finite Element Models

2005 Raghavendran Raghunathan The Use of Wavelets in Experimental Evaluation of GearSystem Dynamics

2006 Ryan Lake Integration of a Small Engine Dynamometer into an EddyCurrent Controlled Chassis Dynamometer

2006 Andrew Thien Pipeline Str uctural Health Monitoring Using Macro-fiberComposite Active Sensors

2007 Ravi Mantrala Squeak and Rattle Detection : A Comparative Exper imentalData Analysis

2007 Tim Over ly Development and Integration of Hardware and Software forActive-Sensors in Structural Health Monitoring

2008 Brian Hill Common Flight Test Module for Multiple Harsh Environments

2009 Abbey Yee Using Group Transmissibility Concepts to Compare DissimilarVehicle Platfor ms

-35-


2010 Thomas Steed Torsional Stiffness Measuring Machine (TSMM) andAutomated Frame Design Tools

2010 B. Shar ma Feasability of Use of Four-Post Road Simulators forAutomotive Modal Applications

2010 B. Swaminathan Operational Modal Analysis Studies on an Automotive Frame

2010 Ray Mar tell Investigation of Operational Modal AnalysisDamping Estimates

2011 Ashley Alexander II Analysis of Using Electronic Fuel Injection inRestr icted FSAE Competition Engines

2012 Christopher G. Larsen Str uctural FRF Measurements up to 50 KHz to AssistFrequency Band Selection for Machinery Health Monitoring

2012 Fred Jabs Simplified Tools and Methods for Chassis and VehicleDynamics Development

2012 Chris Majba A Review of Uncer tainty Quantification of Estimation ofFrequency Response Functions

2012 Mahmoud H. Dargah Effects of Shaker Impedance and Transducer Cross-AxisSensitivity in Frequency Response Function Estimation

2012 Dustin Lindley Design and Optimization of a Throttle and Restrictor forFormula SAE

2012 David Moster Intake Manifold Design for Restricted Engines

2013 Tejas Chothani A Complete Multi-Body Model for an FSAE Space Frame Car

2014 Karan Kohli Structural Dynamics Model Calibration and Validation ofa Rectangular Steel Plate Structure

2014 Rahul Arora Operational Modal Parameter Estimation from ShortTime-Data Series

2014 Murali Mohan Developing a Validation Metric Using ImageClassification Techniques

2014 Shrirang Deshpande Improving Observability of Rotational Vibration SystemsUsing Singular Value Decomposition

2014 Rajeev Hiregmaglur Real Nor malization of Complex Modal Vectors

-36-


2015 Adityanaray an Nir ianjan Nor malization of Complex Modes by Truncation ofAlpha-Polynomial

2016 Brett Baver Proper ty Identification of Viscoelastic CoatingsThrough Non-contact Experimental Modal Analysis

2016 Achyut Vemur i Estimation of Instantaneous Speed for RotatingSystems: New Processing Techniques (July 2016)

2016 Akhil Shar ma A New Multiple Input Random Excitation TechniqueUtilizing Pneumatic Cylinders (July 2016)

2016 Alex Young Validating Automotive Frame Torsion StiffnessMeasurement Techniques (July 2016)

2016 Shounak Deshmukh Synthesizing Uncorrelated Drive Files for MIMOTr ansmissibilityMeasurements on Road Simulators(July 2016)

2016 Sharang Inamdar Estimation of Frequency and Damping of a RotatingSystem Using MEOT and Virtual Sensor Concept(Pending CPT Completion)

DOCTORAL DISSERTATIONS DIRECTED:

YEAR STUDENT DOCTORAL DISSERTATION TITLE

1984 Jan M. Leuridan Some Direct Parameter Identification MethodsApplicable for Multiple Input Modal Analysis

1985 Robert W. Rost Investigation of Multiple Input Frequency ResponseFunction Estimation Techniques for Modal Analysis

1989 Max L. Wei Real-Normalization and Scaling of Measured Modesin Modal Modeling Techniques

1991 Jenq-haur Pan Investigation of Operating Shapes

1991 Allyn Phillips Investigation of an Experimental Dynamics TestSimulation Methodology

1991 Stuart J. Shelley Investigation of Discrete Modal Filters forStr uctural Dynamic Applications

1991 Weicher ng Wang Evaluation and Implementation of Optimal Dynamic

-37-


Str uctural Modification Using Frequency ResponseFunctions

1995 JongChun Wei Investigation of Updating/Correlation DynamicModels Between Experimental and Analytical Analysis

1997 Ralph D. Buehr le System Dynamic Analysis of a Wind Tunnel Modelwith Applications to Improve Aerodynamic Data Quality

2000 Douglas E. Adams A Spatial Approach to Nonlinear System Analysis

2006 Steven Michael Spottswood Identification of Nonlinear Parameters from ExperimentalData for Reduced Order Models

2008 Shashank Chauhan Parameter Estimation and Signal Processing Techniquesfor Operational Modal Analysis

2014 Hassan Pasha Estimation of Static Stiffnesses from Free Boundary Dynamic(FRF) Measurements

2016 George Popescu Digital Signal Processing Methods for Safety SystemsEmployed in Nuclear Pow er Industr y(Oral Defense Completed, Final Draft Approved, September 2016)

-38-


University Activities:

• INFO-TECH Commmittee: 1998-2002

• University Task Force for Graduate Program Review: 1993-1994

• Infor mation Technology, Academic Advisory Committee (ITAAC): 1990-1993

• Committee for Laborator y Instr uctional Fees and Funding (CLIFF): 1990-1992

• Time to Degree Review Panel: 1990-1991

• Academic Computer Advisory Committee: 1986-1989

• University Research Council - Review Subcommittee for Student Summer Research Fel-lowships in Engineering, Chairman: 1985

• University Research Council: 1984-1985

• Search Committee, Dean of the College of Engineering: 1984

• University Research Council - Review Subcommittee for Physical Sciences and Engineer-ing: 1982-1984

College Activities:

• Reappointment, Promotion and Tenure Committee: 1992-1993, 2000-2002 (Chair2001-2002), 2006-2012 (Chair 2007-2008, 2009-2011)

• Faculty Advisor, Engineer ing Tr ibunal: 1996-Present

• Faculty Advisor, Tau Beta Pi: 1986-Present

• Computer Science Curriculum Review Committee: 2011 (Chair)

• Student Grievance Committee: 2009-2010 (Acting Chair)

• Gr ievance Committee, Acting Chair: 2009-2010

• Ad Hoc College Space Committee: 2007-2009

• College Computing Committee: 1990-2002 (Chair: 1997-2002)

• Faculty Graduation Marshall: 1993

• Search Committee, Depar tment Head (MINE): 1991-1992

• College of Engineering Decanal Review Committee, Chair man: 1992

• Dean’s Advisor y Committee: 1987-1990

• Review Committee, Her man Schneider Laborator y Proposals: 1987

• Gr ievance Committee, Chair man: 1985-1987

• Computer Task Force: 1985-1986

• Search Committee, Director of College Computing: 1985-1986

• Advisor y Search Committee, Dean of the College of Engineering: 1984

-39-


• Space Evaluation Committee: 1985-1986

Depar tment/School Activities:

• Faculty Advisor, Pi Tau Sigma: 1996-Present

• Faculty Advisor, Society of Automotive Engineers: 2001-Present

• Str uctural Dynamics Research Laborator y, Associate Director: 1978-2005, Director:2005-Present

• SDS-RPT Guidelines Committee, Chair : 2011-2012

• Faculty Mentor, Senior Design Clinic: 1992-2012

• Lab Committee, Chair : 1995-2012

• Search Committee, Str uctures/Motion Faculty Positions: 1995-1996

• Director of Graduate Studies: 1987-1994

• Search Committee, Academic Challenge Faculty Positions, Chair man: 1987-1988

• Search Committee, Junior Research Associate Position (Electronics Technician), Chair-man: 1987-1988

• Faculty Advisor, ASME Student Section: 1982-1988

• Committee on Teaching Loads and Outstanding Teaching: 1988

• Review Committee for Doctoral Candidacy Exams, Chair man: 1988

• Review Committee, Undergraduate ME Design Content: 1986-1987

• Review Committee, Computer Aided Engineering Wor kstations: 1985-1986

• Review Committee, Computer Equipment: 1985-1986

-40-

professor, mechanical engineering depar tment of ... · pdf fileestimation", handbook of...

Documents