project: long distance wi-fi data-link by ryan gaw in order to demonstrate a real-world (non-farm)...
TRANSCRIPT
Project: Long Distance Wi-Fi Data-Project: Long Distance Wi-Fi Data-LinkLink
By Ryan GawBy Ryan Gaw
In order to demonstrate a real-worldIn order to demonstrate a real-world(non-farm) application for this project,(non-farm) application for this project,
it uses the scenario of a companyit uses the scenario of a companycalled ‘TP-NETLINK’ and their clientcalled ‘TP-NETLINK’ and their client
‘‘V-AUSTRALIA’ for whom they’ve recentlyV-AUSTRALIA’ for whom they’ve recentlyprovided this networking solution to.provided this networking solution to.
Don’t Forget to Clap at the End : ) .. RyanDon’t Forget to Clap at the End : ) .. Ryan
““Let’s face it.. we’re better than Let’s face it.. we’re better than you!”you!”
tpnetlink.wikispaces.cotpnetlink.wikispaces.comm
Equipment & Technical Support for this Project Provided by
TP-NETLINK can provide the perfect solution
for you’re companies specific requirements.
We’ll do it on-time and best of all, we’ll do it
within budget using professional equipment!
V-Australia Client Project
LONG DISTANCE WI-FI DATA LINKTP-NETLINK
V-Australia Client Project
CLIENT SITUATION (1)
V-Australia decided to expand their business by converting an unused warehouse into a Student Training Facility. The
warehouse is located approximately 150 meters from their Head Office.
Before this expansion project could go ahead however, the Directors imposed a number of rules and requirements to
insure that V-Australia would maintain it’s profitability and avoid any additional overheads.
The requirements were as follows:
· All internet, email, VoIP and other ICT required at the new Student Training Facility were to be drawn from the Head Office · Access to the network at the new site will be delivered by Wireless LAN · The WLAN must use the latest Wi-Fi standards & security and have at least five
fixed / wired LAN connection points as a backup to the WLAN.Equipment & Technical Support for this Project Provided by
TP-NETLINKTP-NETLINK
Equipment & Technical Support for this Project Provided by
V-Australia Client Project
SOLUTION PROVIDED (2)
TP-NETLINK presented V-Australia with a range of possible solutions to meet their specific requirements
and to a budget comparable with the size of their operation.
Our client selected TP-LINK equipment, recognized in the industry for offering the best combination of price
and reliability.
Details of the installation are on the following page.
The total cost for the installation came to AU$ 1,823.95
TP-NETLINKTP-NETLINK
• TP-LINK TL-WA601G Wireless Access Point
• TP-LINK TL-ANT2414A 14db Directional Antenna (Top Left)
Equipment & Technical Support for this Project Provided by
• TP-LINK TL-WA642G Wireless NAT Router
OTHER TP-LINK HARDWARE
Omni-Directional Antenna (Shown Top Right)
TP-LINK TL-SF1008D 8 Port 10/100 Switch (Not
Shown)
TP-NETLINKTP-NETLINK V-Australia Client Project
NETWORK PLAN & TP-LINK HARDWARE (3)
Equipment & Technical Support for this Project Provided by
An Access Point or Router, such as the TP-LINK TL-WA601G or TL-WA642G, that can be configured to
work in Bridge Mode, can wirelessly extend the existing network from the Head Office to the new
Training Facility Building.In order to fine tune the data-link between the two locations, a
directional antenna, such as the TP-LINK TL-ANT2414A is used on each bridge, pointing towards each other.
TP-NETLINKTP-NETLINK V-Australia Client Project
PROJECT DETAILS (4)
1x TL-WA601G Bridge1x TL=WA642G Bridge / A.P.2x TL-ANT2414A Antennas
THE ENDTHE END
The TP-LINK hardware for this project was kindly provided free of charge by Anyware Computers (Aust.)
and also the manufacturer, TP-LINK.
Please consider supporting these companies that have been keen to assist with this project and to play a part in our
educationof networking hardware and equipment.
Visit www.tp-link.com for more information or
www.anyware.com.au for details on where you can purchase TP-LINK hardware and
other IT products within Australia or New Zealand.