proposed ap2 line bpm readout card
DESCRIPTION
Proposed AP2 line BPM readout card. 1. Variation on a theme – based on debuncher LLRF boards. Reuse uController, CPLD, Ethernet, SDRAM, Software. 2. Nim format, connects to ACNet via ethernet, local serial port for debug, download. - PowerPoint PPT PresentationTRANSCRIPT
Proposed AP2 line BPM readout card
1. Variation on a theme – based on debuncher LLRF boards. Reuse uController, CPLD, Ethernet, SDRAM, Software
2. Nim format, connects to ACNet via ethernet, local serial port for debug, download
4. On board synthesizer to generate 53MHz from 10MHz reference using DDS in numerically controlled divider configuration, or lock to 53MHz reference
3. Downconvert using AD8348 quadrature demodulator chip. Do low pass in analog. Digitize low pass output at 21MHz – ~35 samples per transfer
5. On board high speed DAC to generate test signals (e.g. self-test possible)
6. Large memory to hold long data records (readout optional); uController could be used for data reduction
7. LVDS port to exchange data, timing with other boards (optional)
Ashmanskas, Hansen, Peterson 7/21/04
SD
RA
M1
6M
x16
EthRd
Eth Ad
Eth Dat
Debuncher Transfer Line BPM Card (2 BPMs/card)
D
A
10/53MHz
Ø Det
Sync I/O
IN 0 A
EP
1C
6
Cyc
lon
e F
PG
A
10 Bit A/D2RF/7
Ref
FB
EthWrt
US
B
MSP430uC
A
DRd
Wrt
Eth
ern
et
Wiz
Ne
tII
M7
01
0A I/Q Dat 10 Bit A/D
53MHzVXO
Err Amp
Sdat I/O
53MHz I/O
RJ-
45
Spare I/O
Lo Pass
Lo Pass
AD8348
IN 0 B10 Bit A/D2RF/7
I/Q Dat 10 Bit A/D
Lo Pass
Lo Pass
AD8348
IN 1 A10 Bit A/D2RF/7
I/Q Dat 10 Bit A/D
Lo Pass
Lo Pass
AD8348
IN 1 B10 Bit A/D2RF/7
I/Q Dat 10 Bit A/D
Lo Pass
Lo Pass
AD8348
2RF
Ashmanskas, Hansen, Peterson 7/21/04
AD9952DDS
AD9201 x 4
SysClk
AD 8348
Ashmanskas, Hansen, Peterson 7/21/04
Post processing of Oscilloscope trace
Multiply by quadraturesquare wave to approximate mixer. Follow with 4 pole IIR
to approximate analog low pass
Multiply by Sine, Cosine follow with 100 nsec boxcar
to show feasibility of oscilloscopes as BPMs
Oscilloscope trace with inline bandpass filter
5mV/Div
Ashmanskas, Hansen, Peterson 7/21/04
Cost and Schedule
Ball park cost $500 per NIM card. Four BPM plates per card
Schematic is in progress. First pass next week
Board fab 10 working days
Layout – 2 to 3 weeks after sign off on schematic
Initial debug of prototype 2 weeks.
Software – first pass 2 weeks – talks to ethernet, reports raw data after being triggered; reporting sum, difference/sum to acnet is easy; more esoteric features TBD
The plan is to having something ready to go in for testing by the end of the shutdown
Ashmanskas, Hansen, Peterson 7/21/04
We need to start ordering parts soon (can we do so next week?)
Assembly of first prototype 2-3 days.