PROSDD Combo SystemPROSDD Combo System

Save Time and Money with Faster Installation Speeds and Consistent Performance

System Options Model No.

Makita® 2500 rpm screwdriver motor

PROSDDM25KA

Parts

PRO300S Attachment only

QDPRO300SG2

PRO200 Attachment only

QDPRO200G2A

PRO300S attachment mandrel

PMANDREL75

PRO200 attachment mandrel

PMANDREL65

Quik Drive® PROSDD System Options

Get the right adaptor for your model screwgun by contacting your Simpson Strong-Tie representative.

PROSDDKA includes: • PRO300S Attachment (also sold separately)

• PRO200 Attachment (also sold separately)

• Extension

• Screw quiver

• Rugged toolbox

• Adaptors; BOA1G2, MAA3G2, HIAG2 (Suit Bosch® GSR625TE, Makita® FS2300 & FS2500, Hitachi® Screwguns) Adaptors for DeWalt®, Hilti® and Milwaukee®, screwdriver motors are also available.

screwgun not included

For more information on screwdriver motors and RPM recommendations per application, please visit one of our websites for your region.

PRO200 Attachment

PRO300S Attachment

Features: • Expanded depth settings for high-density flooring materials 1

• Reversible and replaceable non-skid teeth 2

• Uniform toenailing and countersink on smooth surfaces

• Sure-grip guide tube increases stability for a broad range of screws 3

• Smooth nose will limit marking the plasterboard surface 4

• Rigid strip collation prevents jamming 5

• Extension enables stand-up driving to save time and reduce worker fatigue 6

• QuikLock™ coupling allows for easy assembly and disassembly so system can be used without extension pole 7

• Built-in bit wrench makes bit changes quick and easy 8

• PRO300S drives 8 – 10 gauge and 40mm to 75mm Quik Drive screws

• PRO200 drives 6 – 8 gauge and 25mm to 50mm Quik Drive screws

PDECKNC-RC (sold separately)The decking nose clip positions the screw on the deck board and positions it over the joist for an easy, uniform installation from a standing position.

1

8

2 3

34

6

55

7

7

Simpson Strong-Tie® Fastening Systems

Quik Drive

® PROSDD Combo SystemD e c k i n g | S u b f l o o r | U n d e r l a y | C l a d d i n g | S h e a t h i n g | P l a s t e r b o a r d

Bosch, DeWalt, Hilti, Hitachi, Makita and Milwaukee are trademarks or registered trademarks of their respective holders. ©2015 Simpson Strong-Tie Company Inc. F-Q-PROSDD15AU 6/15 exp. 7/17

Strong-Drive ™ WSNTL SUBFLOOR ScrewRibbed flat head, twin lead thread, sharp point, yellow zinc

WSNTLA134SA: 8g x 45mm WSNTL2LSA: 8g x 50mm WSNTLA2SA10: 10g x 50mm (Complies with AS 1860) WSNTLG2SA: 8g x 50mm (Class 3 galvanised) WSNTL212SA: 8g x 65mm WSNTLG212S: 8g x 65mm (Class 3 galvanised) WSNTL3S: 8g x 75mm WSNTLG3S: 8g x 75mm (Class 3 galvanised)

• Drive up to 40% faster than single thread screws QRS3

Note: Stainless-steel screws may require pre-drilling in certain high-density materials. Class 3 mechanically galvanised coating – complies with AS 3566

Deck-Drive ™ DSV WOOD ScrewRimmed flat-head with nibs, coarse thread, sharp point, Quik Guard® coating

DSVT2S: 10g x 50mm DSVT212S: 10g x 65mm

• Designed to withstand the swelling and shrinkage that is common with softwood timber decking QRSU3

Deck-Drive ™ DHW HARDWOOD ScrewCompact head, coarse thread, winged, hardwood drill point

DHWG60SA: 10g x 60mm (Class 3 galvanised) SSDHW60SA: 10g x 60mm (305 stainless steel)

• Wings for countersinking• Drill point reduces pre-drilling & timber splitting

QRSU2

Deck-Drive ™ DHSD HARDWOOD ScrewRaised countersinkning head, coarse thread, hardwood drill point, 305 stainless steel

SSDHSD50S: 10g x 50mm SSDHSD60S: 10g x 60mm

• Penetrates hardwood products with ease• Unique drill point reduces splitting without pre-drilling QRS2

Composi-lok™ COMPOSITE-DECKING ScrewCap head, coarse thread, sharp point, Quik Guard® coating

HCKDCLB212S: 9g x 65mm (Brown) HCKDCLG212S: 9g x 65mm (Grey) HCKDCLR212S: 9g x 65mm (Red) HCKDCLT212S: 9g x 65mm (Tan) HCKSSDCL212S: 9g x 65mm (305 stainless steel)

• Cap head prevents any mushrooming QRS2

Deck-Drive ™ DCSD COMPOSITE-TO-STEEL ScrewCap head, 16 TPI, #2 drill point, Quik Guard® coating

DCSD238SBR01: 10g x 60mm (Brown) DCSD238SGR01: 10g x 60mm (Grey) DCSD238SRD01: 10g x 60mm (Red) DCSD238STN01: 10g x 60mm (Tan)

• Unique fluted pilot point clears excess composite material• Cap-head prevents mushrooming QRSU2

Deck-Drive ™ BFHSD BI-METAL ScrewRibbed flat head, 16 TPI, #2 drill point with wings, 316 stainless steel bi-metal

SSBFHSD2SA: 10g x 50mm

• Zinc coated to prevent dissimilar metal reaction• Suitable for 1.2mm – 2.4mm steel thickness

QRS2

CBSD WINGED SELF DRILLING ScrewRibbed flat head, 18TPI , #2 drill point with wings, Class 3 mech. gal. coating

CBSDG158SA: 8g x 42mm CBSDGL158SA: 10g x 42mm CBSDGL214SA: 10g x 55mm CBSDGL3SA: 10g x 75mm CBSDZ158SA: 8g x 42mm (Yellow zinc – ZA only)

• Engineered to fasten sheet flooring and timber to steel framing (0.8 – 2.4mm 8g, 1.2 – 3mm 10g) QRSU2

CBSDHG COMPRESSED CEMENT SHEET ScrewRibbed flat head, 16 TPI, #2 drill point with wings, Class 3 mech. gal. coating

CBSDHG158SA: 10g x 42mm CBSDHG214SA: 10g x 55mm

• Engineered to fasten compressed cement sheet to steel framing (1.2 – 3mm steel) QRS3

PPSD PLYWOOD-TO-STEEL ScrewFlat head with nibs, 18 TPI, pilot point, #2 drill point, yellow zinc

PPSD11516SA: 8g x 48mm

• Engineered for steel framing up to 2.4mm – prevents wood and plywood materials (up to 19mm) from “riding up” threads

QRS3

SS3DSC BUGLE-HEAD WOOD ScrewBugle head, coarse thread, type 17, 305 stainless steel

SS3DSC212BS: 10g x 65mm SS3DSC3BS: 10g x 75mm

• Type 17 point for easy, straight drive

QRS3

WSCBG CEMENT SHEET AND UNDERLAY ScrewWafer head with nibs, coarse thread, Type 17, Class 3 mech. gal. coating

WSCBGA158SA: 8g x 42mm WSCBGHLA114SA: 8g x 32mm

• Cement sheet to timber and light gauge steel QRSU2

WSC WOOD Screw Flat head with nibs, coarse thread, type 17 point

SSWSC2BSA10: 10g x 50mm (305 stainless steel) WSC114SA: 8g x 32mm (Yellow zinc)

• Type 17 point for easier driving QRS3

QRS2

DWFSD SELF DRILLING PLASTERBOARD ScrewBugle head, 20TPI , #2 drill point, yellow zinc

DWFSDG114PS: 6g x 32mm (Class 3 galvanised) DWFZSD114PSA: 6g x 32mm DWFZSD158PSA: 6g x 42mm DWFZSD238PSA: 8g x 60mm

• Plasterboard to steel (0.8 – 1.6mm steel) QRP2

DWF PLASTERBOARD-TO-STEEL ScrewBugle head, 18TPI , #2 drill point, yellow zinc

DWFZ1PSA: 6g x 25mm DWF1PSA: 6g x 25mm (Black phosphate – ZA only) DWFZ114PSA: 6g x 32mm DWFZ158PSA: 6g x 42mm

• Plasterboard to steel (0.5 – 0.75mm steel) QRP2

DWC PLASTERBOARD ScrewBugle head, coarse thread, sharp point

DWCZ114PSA: 6g x 32mm DWC114PSA: 6g x 32mm (Black phosphate – ZA only) DWCZ158PSA: 6g x 42mm DWCZ2PS: 6g x 50mm QRP2

Driver bits supplied with every box of screws • All genuine Quik Drive screws come in strips of 30 screws.

Simpson Strong-Tie® Fastening Systems

Screws available for the PROSDD System

This flier is effective until June 30, 2017, and reflects information available as of July 1, 2015. This information is updated periodically and should not be relied upon after June 30, 2017; contact Simpson Strong-Tie for current information and limited warranty or see www.strongtie.com.au/info

Please visit one of our websites for coating and corrosion information©2015 Simpson Strong-Tie Company Inc. F-Q-PROSDD15AU 6/15 exp. 7/17

Simpson Strong-Tie Australia www.strongtie.com.auSydney

P: +61 2 9831 7700Melbourne

P: +61 2 9831 7700Perth

P: +61 8 9248 6002

Simpson Strong-Tie New Zealandwww.strongtie.co.nz P: +64 9 477 4440

Simpson Strong-Tie South Africawww.strongtie.co.za P: +27 87 354 0629