prospect buffing wheels and compounds en · 2018. 7. 3. · polishing agents in solid and liquid...

KIESOWDR. BRINKMANN

BEAUTIFUL SURFACES …

GRINDINGPOLISHING

Since the establishment of our company in 1921 we have been developing and producing high-performance polishing agents in solid and liquid form as well as wheels and discs as polishing agent carriers.

The residues accumulating during polishing can be removed particularly well with the proven degreasing agents from the EKASIT – and SURFACLEAN-series which are specially tailored to our products.

Solid and liquid compounds 2 | Properties of solid compounds and liquid compounds 4 | Solid compounds 6 | Liquid compounds 8

Polishing and buffing discs and wheels, brushes 10 | Grinding and matting 11 | Abrasive wheels, matting discs and wheels 12 | Cutting speed 16 | Pre-polishing and brushing 17 | Sisal discs, sisal wheels 18 | Impregnating substances 22 | Polishing and buffing 23 | Polishing discs, polishing wheels 24 | Cotton qualities 28 | Finishes 30 | Abrasives and abrasive belts 31 | Contact discs for grinding technology 32 | Notes 34 Contents

0302

KRONE Grinding greases for fine surface finishing and grinding belts with a long service life.

Solid and liquid compounds

Product group

01

02

03

04

05

06

07

08

09

ABRA Grinding and brushing compounds for matting and satin-finishing all metals.

REKORD Tripoli polishing compounds for non-ferrous metals.

KIESOLIN Alumina polishing compounds for all metals and plastics.

LUMO Brightening compounds for brilliant lustre on all surfaces.

REGENT Grinding oils and compounds for improved grinding performance and increasing the service life of the grinding belts.

BRISOL Compounds for grinding and matting compounds for all metals.

KARAT Tripoli and/or alumina polishing compounds for all metals and plastics.

FINOX Finishing compounds ensure mirror-like gloss.

Polishing grain

Grease content 10%40%

100%70%

20%%

80%100%

%30%4

20250%40%70%8080%%%0%0%444

We use a large variety of polishing powders for wide ranges of applications.

Greases and waxes in natural or also chemically synthesised form serve as carrier substances for the polishing grain. Depending on the percentage they bring about improved dissipation of the fric-tional heat produced by the polishing process and ensure a good gliding effect on the workpiece.

0504

Sharpness and abrasivenessThe abrasiveness of a polishing paste or compound is decisively influenced by the type of abrasive grain used. Their proportions yield products with certain properties from 10 (= very abrasive) to 1 (= very mild) – completely in accordance with your requirements.

4321

Viscosity

Grease hardness

This is determined by the water phase: oil phase and guarantees optimum flow

characteristics in the application.

It plays an important part in the selection of the polishing agent carriers such as discs and wheels

and influences the effectiveness of the polishing grain used during the machining process.

Pas

tes/

com

po

un

ds

Pas

te a

nd c

omp

ound

s p

rod

uct

grou

p

Iron and steel

Copper and brass

Stainless steel

Aluminium

Magnes. and zamak

Sha

rpne

ss/

abra

sive

-

ness

*

Gre

ase

hard

ness

C

olo

ur

Pro

per

ties

Gri

ndin

g

KR

ON

E 7

••

••

•–

Har

dW

hite

/yel

low

Grin

ding

gre

ase

KR

ON

E 1

3•

••

••

–M

ediu

mW

hite

/yel

low

Grin

ding

gre

ase

KR

ON

E 6

••

••

•–

Sof

t W

hite

/yel

low

Grin

ding

gre

ase

KR

ON

E 1

5•

••

2M

ediu

mG

rey

Grin

ding

gre

ase,

con

tain

s pe

rcen

tage

s of

mild

grin

ding

gr

ain

for

inte

rest

ing

surfa

ce e

ffect

s

Bru

shin

g

AB

RA

153

••

•10

Sof

tD

ark

grey

Mat

ting

com

poun

d w

ith c

oars

e gr

ain

AB

RA

131

••

8 –

9V

ery

soft

Gre

y gr

een

Rel

ativ

ely

grea

sy b

rush

ing

com

poun

d, p

artic

ular

ly s

tabl

e gr

ain

for

effe

ctiv

e w

orki

ng

AB

RA

110

••

••

8 –

9H

ard

Gre

yD

ry b

rush

ing

com

poun

d fo

r un

iform

sur

face

fini

sh

AB

RA

154

••

••

•8

Sof

tG

rey

Cla

ssic

all-

roun

d br

ushi

ng c

ompo

und,

pro

duce

s pa

rtic

ular

ly

hom

ogen

eous

sur

face

s

0706

Po

lishi

ng

RE

KO

RD

642

K•

••

6M

ediu

mB

row

nTr

ipol

i pol

ishi

ng c

ompo

und

with

ver

y go

od a

dhes

ion

to

the

polis

hing

whe

el

RE

KO

RD

845

••

5M

ediu

mB

row

nC

lass

ic tr

ipol

i pol

ishi

ng c

ompo

und,

pro

duce

s pe

rfect

sur

face

s

RE

KO

RD

725

S•

•4

Med

ium

Bro

wn

Wel

l-adh

erin

g tr

ipol

i pol

ishi

ng c

ompo

und,

als

o de

liver

able

in

blo

ck fo

rmat

s

KIE

SO

LIN

417

••

7H

ard

Dar

k gr

een

Chr

omiu

m o

xide

com

poun

d, v

ery

stab

le g

rain

, ver

y sm

ooth

KIE

SO

LIN

207

••

7M

ediu

mG

reen

Sm

ooth

com

poun

d, v

ery

good

adh

esio

n to

sis

al w

heel

s

KIE

SO

LIN

410

••

•6

Med

ium

Gre

enS

moo

th c

ompo

und,

goo

d gl

oss,

ver

y go

od a

dhes

ion

to

sisa

l whe

els

KIE

SO

LIN

415

••

•4

– 5

Sof

t G

reen

Pol

ishi

ng c

ompo

und

with

goo

d ef

ficie

ncy

and

good

po

lishi

ng w

heel

adh

esio

n

KIE

SO

LIN

220

II•

••

••

4 –

5M

ediu

mW

hite

Gre

asy

univ

ersa

l com

poun

d, g

ood

glos

s

KIE

SO

LIN

358

••

••

•4

– 5

Har

dR

edO

ften

prov

en u

nive

rsal

com

poun

d

KIE

SO

LIN

330

••

•4

– 5

Med

ium

Whi

teN

on-s

lip p

olis

hing

com

poun

d w

ith g

ood

glos

s

KIE

SO

LIN

281

••

•4

Har

dW

hite

Dry

, pro

ven

all-r

ound

com

poun

d

KIE

SO

LIN

254

••

•4

Med

ium

Whi

teV

ery

dry

com

poun

d, g

ood

glos

s

Fini

shin

g

LUM

O 9

12•

••

2H

ard

Whi

teD

ry fi

nish

ing

com

poun

d, e

spec

ially

for

non-

ferr

ous

met

als

LUM

O 9

33•

•2

Sof

t B

lue

The

“cla

ssic

”, s

peci

al c

onst

ituen

ts p

rovi

de s

uppo

rt fo

r

degr

easi

ng, g

ood

glos

s

LUM

O 9

39•

••

••

2H

ard

Yel

low

Pro

ven

univ

ersa

l brig

hten

ing

com

poun

d

LUM

O 1

000

••

••

•1

Med

ium

Yel

low

Ultr

afin

e br

ight

enin

g co

mpo

und

for

mirr

or-li

ke g

loss

* fro

m 1

0 =

ver

y ab

rasi

ve

to

1

= v

ery

mild

Co

mp

ou

nd

sP

aste

and

com

pou

nd p

rod

uct

grou

p

Iron and steel

Copper and brass

Stainless steel

Aluminium

Magnes. and zamak

Ab

rasi

ve-

ness

/

abra

sio

n*

Gre

ase

cont

ent

Vis

cosi

tyP

rop

erti

es

Gri

ndin

g

RE

GE

NT

51•

••

••

–10

0%M

ediu

m

Oil

with

ver

y go

od c

oolin

g ef

fect

, als

o in

spr

ay c

ans

Bru

shin

g

BR

ISO

L 12

36•

•10

Med

ium

H

igh

Bru

shin

g co

mpo

und

with

med

ium

gra

in

BR

ISO

L 12

14•

•9

Hig

h H

igh

The

grea

sy v

aria

nt o

f BR

ISO

L 12

36

Po

lishi

ng

(wit

h al

umin

a)

KA

RAT

203

0•

•7

– 8

Med

ium

M

ediu

m

Cla

ssic

com

poun

d w

ith c

oars

e gr

ain

KA

RAT

208

0•

5 –

6M

ediu

m

Med

ium

S

peci

al p

olis

hing

com

poun

d fo

r al

umin

ium

, ver

y lit

tle r

esid

ue,

high

glo

ss

0908

Po

lishi

ng

(wit

h tr

ipo

li)

KA

RAT

226

0•

•6

Med

ium

M

ediu

m

Fine

, not

too

grea

sy tr

ipol

i com

poun

d

Fini

shin

g

FIN

OX

3019

••

••

•1

Med

ium

H

igh

Fine

, dry

brig

hten

ing

com

poun

d fo

r st

reak

-fre

e gl

oss

Sp

ecia

litie

sF

orm

ats

& c

on

tain

ers

Pas

tes

and

co

mp

oun

ds

for

spec

ial a

pp

licat

ions

››

Pre

ciou

s m

etal

s

›› P

last

ics

››

Woo

d

So

lid a

nd li

qui

d c

om

po

und

s

›› H

and-

size

d pi

eces

in p

aper

bag

s

›› B

ars

››

Aut

omat

ic m

achi

ne b

ars

in v

ario

us d

imen

sion

s an

d w

eigh

ts

›› S

tand

ard

vers

ions

of:

200

x 50

x 4

0 m

m

50

0 x

150

x 40

mm

Liq

uid

co

mp

oun

ds

›› La

rge

coni

cal c

onta

iner

s (8

00 k

g)

›› D

rum

s (2

00kg

) ››

Ret

urna

ble

buck

ets

(35

kg)

PT

FE P

AS

TE

S A

ND

CO

MP

OU

ND

S

›› P

olyt

etra

fluor

ethy

lene

per

cent

ages

impr

ove

co

rros

ion-

proo

fing

as w

ell a

s gl

idin

g ch

arac

teris

tics

›› es

peci

ally

for

hard

chr

ome-

plat

ed w

orkp

iece

s

Gre

ase-

free

pas

tes

and

co

mp

oun

ds

›› fo

r si

lky-

glos

s fin

ishi

ng a

nd b

urrin

g ››

avai

labl

e in

diff

eren

t gra

in-s

ize

dist

ribut

ions

* fro

m 1

0 =

ver

y ab

rasi

ve

to

1 =

ver

y m

ild

Polishing and buffing wheels & discs / brushes

Product group

01

02

03

04

Grinding & matting Surface finish from coarse to very fine from page 11

from page 17

from page 23

from page 29

Pre-polishing & brushing for coarse and fine polishing processes

Polishing & buffing for aggressive pre-polishing as far as streak-free glazing

Abrasives & abrasive belts grinding, burring and matting

Only selected cotton cloth of particularly tear-resistant yarns. Higher performance and longer service life by means of additional special chemical treatment.

Sisal wheels and brushes made of long-fibre raw material, in natural form or with different kinds of impregnation.

GR

IND

ING

&

MA

TT

ING

1110 Grinding & matting

›› Articles made mainly of nylon fleece with embedded abrasive grain

›› Processes in various wheel constructions ›› For light sanding and burring work›› And cleaning processes (incl. paint removal) ›› Finishing

By the incorporation of different abrasive grains in the fleece material a surface finish from coarse to very fine can be obtained. Mainly red fleece with aluminium oxide grain is used. Grey fleece contains harder and more abrasive silicon carbide.

Grinding & matting

Abrasive cloth, preferably combined 1:1 with fibre fleece, arranged in lamellar shape around a core.

Abrasive cloth folded in tongues and arranged around a cardboard core .

Fibre fleece arranged in large waves around a core. Depending on the type of fleece, due to the undulation somewhat flexible.

V-grinding wheels Combi-brushes Waved matting wheel TYPE W

Diameter

200 to 400 mm

Diameter

200 to 400 mm

Diameter

200 to 400 mm

Working width

15 to 1600 mm

Working width

30 to 50 mm

Grain size

60 to 600

Grain size

60 to 600

Inner diameter

Solid core, 10 to 130 mm

Inner diameter

Solid core or also pipe (use with centring plates)

Inner diameter

Solid core or also pipe (use with centring plates)

ABRASIVE WHEELS, MATTING DISCS AND WHEELS


Fibre fleece folded in tongues and arranged one after the other round a core.

Fibre fleece in lamellae arranged around a wooden core.

Fibre fleece in lamellae arranged around a tube. Low-price variant of the one in the adjacent illustra-tion.

Double tongue matting wheels

Matting discs with wooden core

Matting discs Type P

Diameter

960 mm

Diameter

100 to 450 mm

Diameter

100 to 410 mm and 960 mm

Working width

approx. 25 to 30 mm

Working width

15 to 300 mm

Working width

15 to 1600 mm

Inner diameter

35 to 450 mm

Inner diameter

10 to 80 mm

Inner diameter

19/hexagonal 76 to 495 mm on tube (use with centring plates)

Fibre fleece drawn into a metal staple holder, 4 or 6 layers.

Fibre fleece arranged in narrow waves around a core. Very compact, stable version.

Design as in adjacent illustration on left, but with solid core.

Waved matting wheels NC matting wheels NC matting wheels

ABRASIVE WHEELS, MATTING DISCS AND WHEELS

Diameter

300 to 500 mm

Diameter

200 to 500 mm

Diameter

200 to 500 mm

Working width

20 to 30 mm

Working width

16 to 25 mm

Working width

16 to 25 mm

Inner diameter

as required – also possible with metal staple holder

Inner diameter

76 to 250 mm (use with centring plates)

Inner diameter

With solid core or also with metal staple holder


Fully rounded discs, also as sheet material (hand pad).Very good for manual cleaning of anode rails..

Fleece cut into rolls, for manual processing.

Also with shank –in many designs.

Matting sheets Fibre fleece rolls Small abrasive and polishing tools

Diameter

30 to 1000 mm

Working width

approx. 8 to 12 mm

Inner diameter

as required

U/min

300

400

500

600

800

1400

1600

1800

2000

2200

2400

2600

2800

3000

10

12

13

14

15

16

Øm

m100 150 200 250 300 350 400 450 500 600 1000

12

14

15

17

19

20

22

23

14

16

18

21

23

25

27

29

31

10

18

20

23

26

28

31

34

36

39

12

22

25

28

31

34

37

40

43

47

11

14

25

29

33

36

40

44

47

51

55

12

16

29

33

37

41

46

50

53

58

63

14

18

33

37

42

47

51

56

15

20

36

41

47

52

57

18

25

44

50

56

15

20

25

31

41

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

m/sec

Economical cutting speeds (mean values):

The higher the revolutions per minute (rpm) of the disc, the harder and less flexible the coating becomes.

GrindingMattingPolishing of metal Polishing of metal (strong contours)Polishing of plastic

approx. 30 m/sec ± 15 % – 20 % approx. 15 m/sec ± 10 % –15 % approx. 36 m/sec ± 15 % approx. 20 m/sec ± 10 % approx. 15 m/sec ± 10 %

Cutting speed as a function of speed and diameter

PR

E-P

OL

ISH

ING

&

BR

US

HIN

G

1716 Pre-polishing & brushing

Sisal wheels and sisal discs for light burring work as well as coarse and fine polishing processes. Special impregnation increases the aggressiveness and service times and allows better absorption of the polishing agents.

Pre-polishing & brushing

Sisal fabrics edged with cotton material. Metal staple holder with a rear side width of 30 mm.Special development for the saucepan industry.

Sisal fabrics edged with cotton material and additional abrasive material. It makes the wheel markedly more aggressive and permits the polishing out of orange peel on stainless steel

Sisal fabric edged with cotton material. Rear side width of 23 mm.

Waved sisal wheels SL Waved sisal wheels NC 30

Waved sisal wheels NC 23

SISAL DISCS, SISAL WHEELS

Diameter

350 to 450 mm

Grain size

60 to 600

Diameter

380 to 430 mm

Diameter

300 to 450 mm

Working width

30 mm

Working width

30 mm

Working width

25 mm

Impregnation

as required

Impregnation

as required

Impregnation

as required

Inner diameter


Inner diameter

180 mm (use with centring plates)

Inner diameter

130, 150, 178, 180 mm (use with centring plates)

Sisal fabric edged with cotton material.

In comparison with the variant “NC 23“ (see adjacent illustration on left) 10 % more sisal fabric.

Sisal fabric edged with cotton ma-terial and folded. Additional quilting circles increase the stability.

Sisal fabric pulled, flat design with cardboard core or metal staple holder.

Waved sisal wheels (compact)

NC sisal fold wheels WP NC sisal wheels

1918 Pre-polishing & brushing

Diameter

300 to 500 mm

Diameter

200 to 550 mm

Diameter

150 to 600 mm

Working width

30 mm

Working width

25 mm

Working width

8 to 20 mm, depending on version

Impregnation

as required

Impregnation

as required

Impregnation

as required

Inner diameter


Inner diameter

76 to 230 mm (use with centring plates), also available with inserted cardboard core

Inner diameter

Solid core, 20 to 130 mm, with metal staple holder 76 to 250 mm (use with centring plates)

Sisal fabric sheathed with cotton material and folded.

Sisal fabric sheathed with cottonmaterial and folded.

Sisal fabric edged with cotton ma-terial and at distances of 10 mm apart sewn, 3 or 4-ply, very evenly folded.

Sisal fold wheels MS pleated

Sisal fold wheels MS pleated, 960 mm Ø

Sisal fold wheels MSL-P

SISAL DISCS · SISAL WHEELS

Diameter

200 to 600 mm

Diameter

960 to 1050 mm

Diameter

600 to 1050 mm

Working width

30 mm

Working width

ca. 30 mm

Working width

22 to 28 mm

Impregnation

as required

Impregnation

as required

Impregnation

as required

Inner diameter


Inner diameter


Inner diameter


Sisal fabric edged with cotton material and sewn at distances apart of 10 mm, 4-ply drawn into the metal staple holder.

Sisal cords assembled to form a brush with solid core. High flexibility for a homogeneous processing screen

Mexico fibre arranged around a cardboard core.

NC sisal wheels Sisal cord brushes Fibre brushes

2120 Vorpolieren & Bürsten

Diameter

200 to 550 mm

Diameter

150 to 600 mm

Diameter

100 to 500 mm

Working width

16 to approx. 30 mm, depending on version

Working width

10 to 100 mm

Working width

5 to 100 mm

Impregnation

as required

Impregnation

as required

Impregnation

as required

Inner diameter

76 to 250 mm (use with centring plates), also available with cardboard core inserted

Inner diameter


Inner diameter

Vollkern, 10 bis 130 mm

Co

lour

H

ard

ness

Imp

reg

nati

on

D-2

5C

olou

rless

Ver

y so

ft an

d fle

xibl

e, e

spec

ially

for

alum

iniu

m a

nd b

rass

SB

Gre

en

Sof

t, sl

ight

ly s

ticky

, for

alu

min

ium

in c

onju

nctio

n w

ith c

ord

brus

hes

D-3

5Y

ello

w

Sof

t to

med

ium

-har

d, fo

r al

l met

als

D-5

0Y

ello

wM

ediu

m-h

ard,

for

all m

etal

s

D-1

00R

edH

ard,

pre

dom

inan

tly fo

r st

eel a

nd s

tain

less

ste

el

SA

Ora

nge

Har

d, p

refe

rabl

y fo

r st

eel a

nd s

tain

less

ste

el

SA

/CB

lue

Ver

y ha

rd, f

or s

teel

and

sta

inle

ss s

teel

SA

/C E

xtra

Pur

ple

Ext

ra h

ard,

hig

h ag

gres

sive

ness

, for

sta

inle

ss s

teel

Imp

reg

nat

ion

Pre

-pol

ishi

ng &

bru

shin

g p

rod

uct

grou

p

PO

LIS

HIN

G &

G

LÄ

NZ

EN

2322 Polishing & buffing

Polishing wheels and discs for aggressive pre-polishing as far as streak-free glazing. Low working down of the wheels with simultaneously good polishing results due to high-quality cotton fabric. Coloured tracer threads as distinguishing features as well as proprietary GSI finishing processes.

Polishing & buffing

Cotton fabric, arranged folded around a core (16 layers,4-fold). The folding produces stability and a cooling effect.

Cotton fabric arranged in waves around a cardboard core. Particularly for the polishing of large-area parts, very long service lives.

Like standard type, here fold pattern on both sides in the same direction.

Waved wheels Fold wheels (standard) Fold wheels, folds W

POLISHING DISCS · POLISHING WHEELS

Inner diameter

Solid core, 20 to 150 mm, also available with metal staple holder (use with centring plates)

Inner diameter

Solid core, 10 to 450 mm, also available with metal staple holder

Inner diameter


Diameter

300 to 550 mm

Diameter

100 to 1050 mm

Diameter

100 to 1050 mm

Working width

20 to 25 mm

Working width

8 to 32 mm, depending on number of layers

Working width


Like standard type, here with very tight folding.

Fold wheels, tight folding


Diameter

100 to 1050 mm

Working width


Inner diameter


Cotton fabric folded. The special GSI 110 surface finishing ensures markedly improved polishing per-formances.

Fold wheels with GSI finishing

Diameter

100 to 1050 mm

Working width


Finishing

as required, see p. 30

Inner diameter


Like standard type, here double folded. Very flexible and lightly worked wheel.

Fold wheels, 2-fold

Diameter

100 to 1050 mm

Working width


Inner diameter


POLISHING DISCS · POLISHING WHEELS

Like standard type, here with GSI110 finishing. For clearly enhanced polishing performances.

Cotton fabric with metal staple holder. For processing of large-area parts on automatic machines.

Like standard type, here with the harder GSI 120 finishing.

NC wheels (standard) NC wheels with GSI finishing

NC wheels with GSI finishing

Inner diameter


Inner diameter


Inner diameter


Diameter

200 to 700 mm

Diameter

200 to 700 mm

Diameter

200 to 700 mm

Working width

14 to 25 mm

Working width

14 to 25 mm

Working width

14 to 25 mm

Finishing


Finishing



Cotton fabric, single-ply pleated and arranged around a core.Airy, soft wheel, preferably for finishing work.

Pleated wheels

Different sisal and cotton wheels with an inner diameter of 8 mm and matching mandrels with an 8-mm shank.

Polishing sets Ø 200 mm and smaller

Cotton fabric, fully-rounded sheets laid to discs.

Polishing discs

Diameter

200 to 500 mm

Diameter

20 to 1050 mm

Diameter

80 to 200 mm

Working width


Working width

10 to 30 mm

Working width

10 to 20 mm

Inner diameter

10 to 150 mm

Inner diameter

5 to 150 mm

Inner diameter

8 mm

Cha

ract

eris

tics

M

arke

r th

read

Des

igna

tio

n

Are

as o

f us

e

Pre

-po

lishi

ng

NF,

ste

el, s

tain

less

ste

elS

peci

al fa

bric

– d

ress

ed, n

atur

al c

olou

r, e

xtre

mel

y ha

rd

and

high

-per

form

ance

yello

w50

01 Z

Po

lishi

ng –

NF,

ste

el, s

tain

less

ste

el(h

igh

polis

hing

per

form

ance

)C

otto

n fa

bric

– d

ress

ed, n

atur

al c

olou

r, v

ery

hard

2 re

d10

17

Po

lishi

ng –

NF,

ste

el, s

tain

less

ste

el(h

igh

polis

hing

per

form

ance

)C

otto

n fa

bric

– d

ress

ed, y

ello

w, v

ery

hard

yello

w50

01 G

Po

lishi

ng –

NF,

ste

el, s

tain

less

ste

el(h

igh

polis

hing

per

form

ance

)C

otto

n fa

bric

– d

ress

ed, y

ello

w, h

ard

2 re

d10

01 G

Inte

rmed

iate

po

lishi

ng

Sta

inle

ss s

teel

Hig

h-pe

rform

ance

fabr

ic –

ver

y de

nse

and

hard

, sp

ecia

l dev

elop

men

t for

the

cook

war

e in

dust

ryda

rk b

lue

1001

Y

Po

lishi

ng

NF,

ste

el, s

tain

less

ste

elC

otto

n fa

bric

– s

tabl

e, m

ade

from

coa

rser

yar

ns2

yello

w10

01 X

Po

lishi

ng

Trim

str

ips

and

profi

les

Spe

cial

fabr

ic –

den

se, m

ediu

m s

tron

ggr

een

1001

W

Po

lishi

ng

NF,

ste

el, s

tain

less

ste

elC

otto

n fa

bric

– e

xtre

mel

y de

nse,

med

ium

har

dye

llow

5001

Co

tto

n q

ual

itie

s P

olis

hing

& b

uffin

g p

rod

uct

grou

p

Po

lishi

ng

NF,

ste

el, s

tain

less

ste

elR

ough

ly c

orre

spon

ds to

type

500

1,

with

ver

y ab

rasi

on-r

esis

tant

, hig

h-gr

ade

yarn

s–

5001

R

Man

ual a

nd a

uto

mat

ic m

achi

ne p

olis

hing

N

F C

otto

n fa

bric

– s

oft,

extr

emel

y de

nse

co

nsis

ting

of fi

ne y

arns

2 re

d10

01

Po

lishi

ng a

nd lu

ster

ing

in o

ne w

ork

cyc

le

(spe

cial

ly fo

r bu

ffing

whe

els

Ø 9

60 m

m)

Fitt

ing

indu

stry

Cot

ton

fabr

ic –

sof

tlig

ht b

lue

1007

S

Hig

h-lu

stre

po

lishi

ng a

nd c

olo

urin

gC

otto

n fa

bric

– s

oft,

with

spe

cial

yar

ns–

1007

Po

lishi

ng a

nd lu

ster

ing

on

ly w

ith G

SI r

efini

ngS

peci

al fa

bric

– li

ght

–60

04

Po

lishi

ng a

nd lu

ster

ing

pa

inte

d w

ood

surfa

ces

Furn

iture

indu

stry

/pia

no fa

ctor

iess

Mol

ton

fabr

ic –

rou

ghen

ed o

n bo

th s

ides

with

spe

cial

yar

ns–

1004

HL

Co

lour

ing

– re

mov

al o

f ann

ealin

g co

lour

sin

the

case

of c

hrom

e-pl

ated

par

tsM

olto

n fa

bric

– r

ough

ened

on

both

sid

es–

1004

MG

Lust

erin

g o

f so

ft s

urfa

ces

in

the

form

of b

uffin

g w

heel

sM

olto

n fa

bric

– m

arke

dly

roug

hene

d on

bot

h si

des

–10

04 M

Ult

rafi

ne p

olis

hing

onl

y w

ith

GS

I refi

ning

fo

r N

E a

nd s

tain

less

met

als

Cot

ton

fabr

ic –

den

se, s

oft,

mad

e of

spe

cial

lytw

iste

d ya

rns

2 bl

ack

8005


PR

EM

IUM

QU

ALI

TIE

S

KIE

SO

WD

R. B

RIN

KM

AN

N

Fin

ish

ing

Fo

r in

crea

sed

ab

rasi

on-r

esis

tanc

e an

d s

hort

er p

roce

ssin

g tim

es

Pol

ishi

ng &

buf

fing

pro

duc

t gr

oup

Mak

e us

e of

the

larg

e va

riety

of fi

nish

ing

poss

ibilit

ies

for

the

optim

isat

ion

of y

our

appl

icat

ions

.

Pro

per

ties

C

olo

ur

Des

igna

tio

n

Are

as o

f us

e

No

n-fe

rro

us m

etal

s, s

teel

, ru

st-p

roo

f m

etal

sS

oft a

nd fl

exib

leG

reen

GS

I-11

0

No

n-fe

rro

us m

etal

s, s

teel

, rus

t-p

roo

f m

etal

s M

ediu

m-h

ard

Red

GS

I-12

0

Ste

el, r

ust-

pro

of

met

als

Har

dO

rang

eG

SI-

140

All

met

als

Esp

ecia

lly if

liqu

id c

ompo

unds

are

use

dM

ediu

m-h

ard

Yel

low

GS

I-61

0

All

met

als

Esp

ecia

lly if

liqu

id c

ompo

unds

are

use

dH

ard

Blu

eG

SI-

620

All

met

als

Hea

t-re

sist

ant e

ven

in th

e ev

ent o

f ex

trem

e st

ress

esH

ard

Blu

eG

SI-

710

H

All

met

als

Hea

t-re

sist

ant e

ven

in th

e ev

ent o

f ex

trem

e st

ress

esV

ery

hard

Red

GS

I-72

0 H

AB

RA

SIV

ES

&

GR

IND

ING

BE

LT

S

›› Special grinding belts from 3M›› Scotch-Brite articles for grinding, burring

and matting for all metals ›› Our own assembly and packaging of

STARCKE grinding belts

Abrasives & grinding belts

3130 Abrasives & grinding belts

K 33 = 25 mm coating depth, smooth K 34 = 25 mm coating depth, grooved

Oil-resistant, highly abrasion-resistant

Elastic Elastic-flex Rubber discs

CONTACT DISCS FOR GRINDING TECHNOLOGY

K 11 = 35 mm coating depth K 13 = 20 mm coating depth

K 12 = 35 mm coating depth (Lamellae alternately hard to soft)

K 01 = 25 mm coating depth, smooth K 02 = 25 mm coating depth, groovedK 03 = 50 mm coating depth, smooth K 04 = 50 mm coating depth, grooved

Also available as K 05 with 35 mm coating depth.Tooth angle of 15°– 80 ° Hardness: very soft to hard

Hardness: soft to hard

Toothing

Various diameters for all the usual systems.

PulleysCore shapes

3332 Abrasives & grinding belts

Various types of tooth from 5 °– 80 °

Various core shapes.Also with hubs and bearing seats or according to drawings and sketches.

3. Hook teeth

1. Sawtooth

2. Standard

3534 Notes

BEAUTIFULSURFACES …

Sub

ject

to c

hang

e.12

/17

· for

m-id

-abl

e.co

m

D-32758 Detmold Wittekindstraße 27– 35 Phone: +49 (52 31) 76 04-0 Fax: +49 (52 31) 76 04-28 e-mail: [email protected]

D-12057 Berlin Boschweg 4 Phone: +49 (52 31) 76 04-0 Fax: +49 (52 31) 76 04-661 e-mail: [email protected]

Sales offices/ Sales partners: Benelux Czech Republic Japan Portugal Romania Russia Slovakia Thailand Tunisia Vietnam

Subsidiaries: Austria France HungaryPoland Serbia Spain Ukraine

www.kiesow.org

KIESOW DR. BRINKMANN GmbH & Co. KG

prospect buffing wheels and compounds en · 2018. 7. 3. · polishing agents in solid and liquid...

Documents