prototyping and test services · prototyping and test services advanced engineering &...
TRANSCRIPT
Prototyping and Test Services
Advanced Engineering & Manufacturing
CTC is an independent, nonprofit, applied scientific research and development organization. As a nonprofit, CTC partners with clients to provide the best possible advanced engineering & manufacturing solutions. Our facilities are built and approved to protect sensitive manufacturing, programs and information processing. We offer extensive prototyping and test services expertise, including:
• Prototype Fabrication and Assembly• Mechanical Testing - High Temperature and Cryogenic• Test Planning Development and Test Specimen• Drop Tower Testing
Concurrent Technologies Corporation (CTC) designed, constructed, tested and deployed a Carriage, Stream, Tow, and Recovery System Trainer (CSTRS-T) for the MH-60S Helicopter. CTC installed a fully functional CSTRS unit in a MH-60 cabin mockup mounted on a 30-ft. high support structure with supporting power, hydraulic, communications, lighting, and control systems used for training and testing.
CTC’s quality management system is certified to the ISO 9001:2008 (Quality) and 14001:2004 (Environmental) standards. CTC’s for-profit affiliate, Enterprise Ventures Corporation (EVC), is certified to the AS9100 standard for aerospace activities.
Prototyping and Test Services
Testing Capabilities
Prototyping and Test Services
Prototype Fabrication and Assembly
High Temperature (2300°F) Vacuum and Cryogenic Testing at Strain Rates of up
to approximately 20 in/in/sec for subsize compression specimens
Test Planning Development & Test
Specimen Preparation
Drop Tower Testing
www.ctc.com/AEM4/17
© 2017. Concurrent Technologies Corporation. All Rights Reserved.
Corrosion Testing• Accelerated Weathering – ASTM G26• Alternate Immersion – ASTM G44• ASSET Testing – ASTM G66• Condensation – ASTM D4585• Cyclic Corrosion – GMW14872• EXCO Test – ASTM G34• Filiform Corrosion – ASTM D2803C• Humidity – ASTM D1748, D1735• Filiform Corrosion – ASTM D2803,
Procedure C• Hydrogen Embrittlement – C-rings –
ASTM F519• Modified Salt Fog Testing – ASTM G85,
Annex 1, 2, 3, 5• NAMLT Testing – ASTM G67• Salt Fog Testing – ASTM B117• Sandwich Corrosion–ASTM F1110• Stress Corrosion Cracking – ASTM G64,
G58, G47, G49• Total Immersion Corrosion – ASTM F483• Ultraviolet (A or B) Condensation–
ASTM D4587
Destructive Testing• Bend and Flexure Testing – ASTM E290• Compression Testing – ASTM B312, ASTM
B331, ASTM B528, ASTM E9, ASTM E209• Dynamic Tear Testing – ASTM E604,
ASTM E208• Ductility and Formability Testing• Fatigue – low cycle, high load• Fracture Testing – ASTM E643• Fracture Toughness – ASTM E399,
ASTM E1820• Impact Testing – ASTM E23• In-Plane Shear – ASTM D3518• Tension Testing – ASTM E8, ASTM D412,
ASTM E21
Materials Compatibility• Various substrates and methods• Programs developed in-house
Metallurgical Analysis• Energy Dispersive Spectrometry (EDS)• Hardness Testing – ASTM E18, ASTM E384• Image Analysis – ASTM E45, ASTM E112,
ASTM E1122, ASTM E1245• Microhardness Testing – ASTM B578 • Nanohardness Testing• Optical Microscopy• Sample Preparation• Scanning Electron Microscopy (SEM)
CTC has 16,000 square feet of lab space and 130,000 square feet of high bay work/demonstration space.
Tinius-Olsen Universal Testing Machine 120 kip
Reichert Metallograph
MTS 3 - 200kip load capacity, 2200°F max
temperature in ambientenvironment
Advanced Light Tactical Trailer
C-5 Aircraft Prototype Door
MTS 2 - 55kip load capacity, 2300°F max temperature in
ambient environment
MTS 1 - 50kip load capacity, 2300°F max temperature
with inert environment, rapid strain rates
Mine Sensor and Neutralization Handling Systems for the
MH-60S Helicopter
LECO M-400-G Microhardness Tester
Scanning Electron Microscope EDS-EBSD
Instron Drop Tower - 20,000 ft-lbs capability at full load and
drop height, specimen test temperatures down to -452°F
MTS 810
Tinius Olsen Impact Tester - 300 ft lbs load capacity for Charpy, Izod and tension
impact tests, capableof temperatures down to -452°F
ContactAndrew Shapero, Senior Director, Advanced Engineering & Sustainable Manufacturing, (952) 210-9585, [email protected]