pto- gearboxes and clutches - katsa
TRANSCRIPT
K a t s a - Geared for you
PTO- Gearboxes and Clutches
400
Outputs:
• Up to four outputs
Available connections for outputs:• SAE B, C, D or E connection flanges• Various spline and keyway shaft connections• Customised output shafts, optionally with an integrated, hydraulically controlled multi-plate clutch• Customised threads and adapter flanges for non-SAE connections
2
Universal pump driveseries 400General information
400
3
Input:
Bell housing connections:• SAE 00, 0, ½, 1 and 2
Input shaft connections:• Customised shaft with keyway or spline• Flexible coupling from several manufacturers
400
Ratings:
• Total max power 750kW (opt. 900kW) - Max power 450kW / output - Max torque 2300Nm / output - Max speed 2500rpm• Gear ratio i = 0,661-1,421• Weight app. 450kg, depending on chosen options.
Universal pump driveseries 400Technical information
4
400
Dimensions (example with SAE 1 flywheel housing):
Additional options:
• Directions of output rotation: - Opposite of the input shaft - Same as the input shaft with a countershaft• Oil cooler and filter• Integrated control valve for multi-plate clutch output• Electronic gearbox / clutch controller unit and control design for CAN-based control systems• Gearbox condition, temperature, oil pressure and/or rotation speed monitoring
Universal pump driveseries 400Technical information
SAE 1Ø 555
420
820400
400
818
200
159
299
306
5
500
Outputs:
• Up to three outputs
Available connections for outputs:• SAE B, C, D or E connection flanges• Various spline and keyway shaft connections• Customised output shafts, optionally with an integrated, hydraulically controlled multi-plate clutch• Customised threads and adapter flanges for non-SAE connections
Universal pump driveseries 500General information
6
500 Input:
Bell housing connections:• SAE 00, 0, ½, 1 and 2
Input shaft connections:• Customised shaft with keyway or spline• Flexible coupling from several manufacturers
7
Universal pump driveseries 500Technical information
Ratings:
• Total max power 750kW (opt. 1100kW) - Max power 450kW / output - Max torque 2300Nm / output - Max speed 2500rpm
• Gear ratio i = 0,661-1,421
• Weight app. 400kg, depending on chosen options.
500
8
Additional options:
• Direction of output rotations: - Opposite of the input shaft• Oil cooler and filter• Integrated control valve for multi-plate clutch output• Electronic gearbox / clutch controller unit and control design for CAN-based control systems• Gearbox condition, temperature, oil pressure and/or rotation speed monitoring
Dimensions (example with SAE 1):
Ø 555 SAE 1
155
507,5926
283
91940
8
30515
1
179
500
9
Inline PTO clutchseries 350General information 35
0
Outputs:
• 1:1 main wet multi-plate clutch, mechani- cal clutch or separate dry clutch output• Up to three direct driven PTO outputs (two in the front, one in the back)• Customised shaft with keyway or spline for main output shaft
Available connections for PTO outputs:• SAE B, C, D or E connection flanges• Various spline and keyway shaft connections• Customised output shaft for direct sheave drive• Customised threads and adapter flanges for non-SAE connections
All outputs rotate inthe same directionwith input shaft
10Shaft output and customised output
350 Input:
Bell housing connections:• SAE 00, 0, ½, 1 and 2
Input shaft connections with orwithout bell housing:• Customised shaft with keyway or spline• Flexible coupling from several manufacturers
11
Ratings:• Total max power 500kW - Max power 350kW / clutch output - Max power 300kw / PTO output• Ratio Clutch i=1• Gear ratio i = 0,601- 0,950• Weight app. 650kg, depending on chosen options.
Equipped with: • Own oil sump • Only one oil (lubrication and clutch activation) • Own lubrication and hydraulic oil pump • Integrated control valve for multi-plate clutch output
Additional options: • Electronic gearbox / clutch controller unit and control design for CAN-based control system • Gearbox condition, temperature, oil pressure and/or rotation speed monitoring • Oil cooler and filter
Dimensions (example with SAE 1 housing and medium size wet clutch):
Inline PTO clutchseries 350Technical information
643
350
12
782643293 487
381
1070
901
350
13
Special version: main output with mechanical on/off coupling
Special version: main output with SAE connection for dry clutch of choice or direct connection
300Inline clutch
series 300General information
Outputs:
• 1:1 main wet multi-plate clutch or clutch with mechanical engagement• Customised shaft with keyway or spline
Outputs rotate in the same directionwith input shaft
14
Input without bell housing
300 Input:
Bell housing connections:• SAE 00, 0, ½, 1 and 2
Input shaft connections with or without bellhousing:• Customised shaft with keyway or spline• Flexible coupling from several manufacturers
15
300Inline clutch
series 300Technical information
Ratings:• Total max power 500kW - Max power 350kW / clutch output - Three different clutch sizes available• Ratio Clutch i=1• Weight app. 500kg, depending on chosen options.
Equipped with: • Own oil sump • Only one oil (lubrication and clutch activation) • Own lubrication and hydraulic oil pump • Integrated control valve for multi-plate clutch output
Dimensions (example without flywheel housing and medium size clutch):
739530 10090
90
16
300 Additional options:
• Electronic gearbox / clutch controller unit and control design for CAN-based control system• Gearbox condition, temperature, oil pressure and/or rotation speed monitoring• Oil cooler and filter
700
782
432
17
Available with:
• Specifically designed hydraulic block for marine applications with an integrated oil filter• Marine oil/water cooler• All classification societies• Optional: stainless lubrication pipes, pump, cooler and other parts• For arctic conditions, necessary design choices such as cold-resistant materials and lubricants, heating and ice prevention are made to ensure reliability• Different instrumentation options for gearbox condition, temperature , oil pressure and/or rotation speed monitoring
PTO drives available formarine and offshoreapplications
18
Application examples
• Hydraulic pump drives for deck machinery like winches and fishing equipment• Pump drives for firefighting equipment and mud pumps
19
Solution for In/Out off-set, ratio and/or change of rotation
• Ratios of up to 1:1.5 possible• Output shaft direction of rotation may be chosen• Small and compact solution• Including own oil sump and oil pump, no external lubrication system is required• Electronic control unit for CAN-based control system is available
Hybrid pump drives
• Standard SAE flange sizes from SAE 0-2 for diesel engines available• Second Input flange for state of the art permanent magnet motors for alternative electric drive• The input type may be changed manually, pneumatically or hydraulically, using existing system or our own electronic control unit• Other parameters similar to previously presented pump drives
Tailored solutions foryour needsGearboxes with fully customisedfeatures and dimensions
20
Solution for shaft off-set, ratio conver-sion and/or change of the direction of rotation, including up to 4 PTO´s
• Possibility for up to 4 PTO´s for hydraulic pumps, generators or other applications• Output connections are fully customised according to your application requirements• PTO ratios may be varied, e.g. 1:0.77 for increased speed at outputs• Electronic control unit for CAN-based control system is available
21
Energy & Wind
Steel & Metals
Pulp & Paper
Marine & Offshore
MainBusinessAreas
22
Katsa Oy designs and manufactures power transmission components and complete gear-box solutions for world-class customers in the following business areas:
Energy & Wind
Steel & Metals
Vehicles & Rail
Mining & Construction
23
At Your Service
Katsa Oy designs and manufactures gear units and power
transmission components. Since the establishment in 1955, Katsa Oy has been focusing on high-accuracy
gearwheels and tailor-made gearboxes.Today, products can be found wherever
True Expertise is needed.
Katsa OyIlmailunkatu 23FI-33900 Tampere, FinlandTel +358 3 315 [email protected]