pts format
DESCRIPTION
consist format of report used in RTU Btech 7 sem training reportTRANSCRIPT
Format for Preparation of Seminar Report
1. ARRANGEMENT OF CONTENTS: The sequence in which the seminar report material shall be arranged and bound is as follows:
01. Cover Page (Color)
02. Table of Contents (Start Page No. from abstract)
03. List of Tables
04. List of Figures
05. Certificate from Industry/organization/Institute
06. Acknowledgement
07. Abstract
08. Matter of training
09. Appendix
10. References
2. BINDING:
Seminar report shall be printed on A4 size page & spiral bounded.
(Front Cover - White sheet, Back Cover- Blue sheet)
3. TYPING INSTRUCTIONS:
1.5 line spacing should be used for typing the general text. The general text shall be justified
and typed in the Font style ‘Times New Roman’ with Font size 12.
Heading & Subheading shall be typed in the Font style ‘Times New Roman’ with bold
letters and Font size shall be 14 & 12 respectively.
Margin should be 1.5 inch for left and 1 inch for right, top and bottom.
4. FORMATS:
4.1 Cover Page– A specimen copy of the Cover page of the project report is given in
Appendix I.
4.2 Acknowledgement- A specimen copy of the acknowledgement is given in Appendix II.
4.3 Abstract – Abstract shall be one page synopsis, it summarizes the aims, implications and
conclusions of the topic of seminar, typed with 1.5 line Spacing, Font Style Times New
Roman and Font Size 12.
4.4 Table of Contents – The table of contents shall list all material following it as well as
any material, which precedes it. 1.5 line spacing should be adopted for typing the matter
under this head. A specimen copy of the Table of Contents is given in Appendix III.
4.5 Chapters – The chapters may be broadly divided into 3 parts (i) Introductory chapter i.e.
developing the main theme of the topic (ii) Literature review of the training
(iii) Summary or Conclusions. The main text shall be divided into several chapters and
each chapter may be further divided into several divisions and sub-divisions.
- Each chapter should be given an appropriate title.
-Tables and figures in a chapter should be placed in the immediate vicinity of the
reference where they are cited.
4.6 Appendices – Appendices are provided to give supplementary information, which is
included in the main text may serve as a distraction and cloud the central theme.
4.7 List of References: Referred websites shall be written with complete link and books are
to be mentioned with their Title, Author(s), Publisher & Edition.
Appendix – I
A
PRACTICAL TRAINING REPORT
ON
TOPIC
Taken at
Name of Institute/Organization/Industry
Submitted in partial fulfillment
for the award of the degree of
BACHELOR OF TECHNOLOGY
(Rajasthan Technical University, Kota)
IN
ELECTRONICS & COMMUNICATION ENGINEERING
SESSION (2014-2015)
SUBMITTED TO: SUBMITTED BY:
Seminar Coordinator Name of Student
Dept. of ECE Branch & Semester
RTU Roll No.
DEPARTMENT OF ELECTRONICS & COMMUNICATIN ENGG.
GOVT. MAHILA ENGINEERING COLLEGE AJMER
NASIRABAD ROAD, MAKHUPURA, AJMER-305002
Appendix-II
AKNOWLEDGEMENT
This is opportunity to express my heartfelt words for the people who were part of this
training in numerous ways, people who gave me unending support right from beginning of
the training.
I am grateful to training incharge Mr./Ms./Dr. .…………………… for giving guidelines to
make the project successful.
I want to give sincere thanks to the principal, Dr. M.M. Sharma for his valuable support.
I extend my thanks to Name of HOD Head of the Department for his cooperation and
guidance.
Yours Sincerely,
(Student Signature & Name)
Appendix-III
TABLE OF CONTENTS
CHAPTER NO. TITLE PAGE NO.
CERTIFICATE
ACKNOWLEDGMENT
ABSTRACT 1
1. INTRODUCTION
1.1 GENERAL 2
1.2 . . . . . . . . . . . . 3
1.2.1 General 5
1.2.1.1 General 8
2. LITERATURE REVIEW 16
2.1 GENERAL 17
2.1.1 . . . . .. 19