publishedbyauthorityoftherepublicofkenya · 8/13/2010 · kenya standard — codex standard for...

SPECIAL ISSUE

THE KENYA GAZETTEPublished by Authority of the Republic of Kenya

(Registered as a Newspaperat the G.P.O.)

Vol. CXII—No.80 NAIROBI, 13th August, 2010 Price Sh. 50

GAZETTE NOTICE No.9700

THE LOCAL GOVERNMENT ACT

(Cap. 256)

THE LOCAL GOVERNMENT ELECTIONS RULES

DECLARATION OF CASUAL VACANCIES

NOTICEis given that the three (3) electoral areas (civic wards) specified in the third column of the Schedule hereunder and falling within the

local authorities and constituencies specified in the second and fourth columnsrespectively have been declared vacant.

SCHEDULE

Constituency Code Local Authority Ward Constituency

197 Migori Kachieng Nyatike

025 Lamu Langoni Lamu West

193 Homa Bay South Kabuoch Ndhiwa

Dated the 12th August, 2010

A. I. HASSAN,

Chairman,

Interim Independent Electoral Commission.



(Cap. 256)


APPOINTMENT OF RETURNING OFFICERS

IN EXERCISE of the powers conferred by rule 8 of the Local Government Elections Rules, the Interim Independent Electoral Commission

appoints the persons named in the first and second columnsofthe Schedule to be the returning officers and deputy returning officers for the electoral

areas (civic wards) specified in the third column and which are within the relevant constituencies specified in the fifth column of the said schedule.

The appointmentshall comeinto force on 9th August, 2010, and will be for conductof the by-elections to be held on 20th September, 2010.

SCHEDULE

Returning Officer Deputy Returning Officer Ward Local Authority Constituency

Moses Daula Gogo Joseph Owuor Kachieng Migori Nyatike

Nanokha Maurice Simiyu Kanyangi Tom Kuni South Kabuoch Homa Bay Ndhiwa

Stephen Karani Masoud Amina Rashid Langoni Lamu Lamu West


A. I. HASSAN,

Chairman,


[3059

3060 THE KENYA GAZETTE 13th August, 2010



(Cap. 256)


POLLING CENTRESFOR CIVIC BY-ELECTIONS

IT IS notified for general information that the polling centres for the electoral areas (civic wards) listed in the third column ofthe schedule hereto

and falling within the constituencies listed in the second column of the schedule are located at the places described in fifth column of the said

Schedule and those are the places where polling for the by-elections shall take place on 20th September, 2010.

SCHEDULE

Const. Code Constituency Local Authority Polling Area Polling Station Code Where Situated

025 Lamu West County ofLamu Langon 025/012/01 Lamu Boys Primary School

Lamu West County ofLamu Langoni 025/012/02 Lamu Boys Primary School

Lamu West County ofLamu Langoni 025/013 Lamu Boys Secondary SchoolLamu West County ofLamu Langoni 025/049 Mkomani Girls Primary School

Lamu West County ofLamu Langoni 025/050 Kandahari Play Ground

193 Ndhiwa County ofHoma Bay South Kabuoch 193/082 Malele Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/083 Maroo Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/084 Ober Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/085 Anding'o Pala Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/086 KowuorPrimary School

Ndhiwa County ofHoma Bay South Kabuoch 193/087 Kamenya Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/088 Ototo Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/089 Ondati Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/090 Saramba Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/101 Nyakwere Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/102 Gina Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/103 Koguta Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/126 Kaguria Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/127 Agudo Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/138 Ogango Primary School

Ndhiwa County ofHoma Bay South Kabuoch 193/139 Pala Boya Primary School

197 Nyatike County of Migori Kachieng' 197/061 Otati Primary School

Nyatike County of Migori Kachieng' 197/062 Wang'aya Primary School

Nyatike County of Migori Kachieng' 197/063 Sidika Primary School

Nyatike County of Migori Kachieng' 197/064 Raga Primary School

Nyatike County of Migori Kachieng' 197/065/01 Sori Primary School

Nyatike County of Migori Kachieng' 197/065/02 Sori Primary School

Nyatike County of Migori Kachieng' 197/066 Kopala Primary School

Nyatike County of Migori Kachieng' 197/067 Gunga Primary School

Nyatike County of Migori Kachieng' 197/068 Nyamanga Primary School

Nyatike County of Migori Kachieng' 197/069 Orore Primary School

Nyatike County of Migori Kachieng' 197/080 Kiranda Primary School

Nyatike County of Migori Kachieng' 197/100 God Keyo Primary Sch

Nyatike County of Migori Kachieng' 197/101 Wachara Primary School

Nyatike County of Migori Kachieng' 197/102 B. L. Tezza Primary School

Nyatike County of Migori Kachieng' 197/103 Obondi Pr.Sch

Nyatike County of Migori Kachieng' 197/104 Kaduro Pr.Sch

Nyatike County of Migori Kachieng' 197/105 Agolo MuokPrimary School

Nyatike County of Migori Kachieng' 197/106 Odendo Primary School

Nyatike County of Migori Kachieng' 197/107 Not Primary School

Nyatike County of Migori Kachieng' 197/108 Bongu Beach (Tent)


A. L HASSAN,Chairman,


GAZETTE NOTICE NO.9703 KS ISO 3033-1: 2005 Kenya Standard — Oil of spearmint Part 1:

Native type (Mentha spicata L.), SecondTHE STANDARDS ACT Edition

(Cap. 496) KS ISO 3053:2004 Kenya Standard — Oil of grapefruit(Citrusxparadisi Macfad.),

expression, Second Edition

Kenya Standard — Oil of blackpepper

(Piper nigrum L.), Second Edition

Kenya Standard — Oil of ylang-ylang

[Cananga odorata (Lam.) Hook. f. et

Thomson forma genuina], Second Edition

DECLARATION OF KENYA STANDARDS obtained by

PURSUANTto section 9 (1) of the Standards Act, the National

Standards Council declares the specifications or codes of practice

appearing in the schedule hereto to be Kenya Standards with effectfrom the date of publication ofthis notice.

KS ISO 3061:2008

KS ISO 3063:2004

Number Title of Specification or Code ofPractice

KS ISO 3140:2005 Kenya Standard — Oil of sweet orange

[Citrus sinensis (L.} Osbeck], obtained by

mechanical Treatment, Second Edition

Chemical

KS 1265:2009 Kenya Standard — Paraffin wax based

candles — Specification, Second Edition

13th August, 2010 THE KENYA GAZETTE 3061

KS ISO 3214:2000

KS ISO 3475:2002

KS ISO 3515:2002

KS ISO 3518:2002

KS ISO 3519:2005

KS ISO 11130:1999

KS 2157-1: 2009

KS 2157-2: 2009

KS 647:2010

KS 648:2010

KS 375:2010

KS 1024-1:2010

KS 1024-2:2010

KS 654:2010

KS 382:2010

KS 515:2010

KS 2227:2010

KS 807-2:2010

KS 807-4:2010

KS 1578-1:2010

KS 420-1: 2010

KS 420-2: 2010

KS 420-3: 2010

KS 420-4: 2010

KS 420-6:2010

KS 420-7: 2010

Kenya Standard — Oil of litsea cubeba

(Litsea cubeba Pers.), Second Edition

Kenya Standard — Oil of aniseed

(Pimpinella anisum L.), Second Edition

Kenya Standard — Oil of french lavender(Lavandula angustifolia Mill), Second

Edition

Kenya Standard — Oil of sandalwood

(Santalum album L.), Second Edition

Kenya Standard — Oil of lime distilled,

Mexican type [Citrus aurantifolia (Christm.)

Swingle], Second Edition

Kenya Standard — Alternate immersion test

in salt solution, First Edition

Kenya Standard — Hot appliedThermoplastic Road Marking paint- Part 1:

Specification for Constituent Material andMixtures, First Edition

Kenya Standard — Hot applied

Thermoplastic Road Marking paint —

Specification Part 2: Specification for road

performance,First Edition

Kenya Standard — Industrial Oxygen —Specification, Second Edition

Kenya Standard — Industrial Acetylene gas

— Specification, Second Edition

Kenya Standard — Industrial Liquid

Carbon Dioxide — Specification, Second

Edition

Kenya Standard — Vitreous China Water

Closet Pan —Specification, Part 1: Vitreous

China wash down water closet pans SecondEdition

Kenya Standard — Vitreous China Water

Closet Pan—Specification, Part 2: Vitreous

China squatting wash down water closet

pans Second Edition

Kenya Standard — Mosquito Coil —

Specification, Second Edition

Kenya Standard — Power Alcohol —


Kenya Standard — Gasohol 10 % (v/v) —Specification Second Edition

Kenya Standard — Automotive Biodieselfuel — Specification, First Edition

Kenya Standard —Polishes —Specification,Part 2: Floor polish, solvent type (liquid and

paste) Second Edition

Kenya Standard — Polishes —

Specification, Part 4: Floor polish, wateremulsion self shining type, Second Edition

Kenya Standard — Metal Polishes —

Specification, Part 1: Ordinary liquid metal

polishes, Second Edition

Kenya Standard — Paper and board — Testmethods Part 1: Determination of pH, First

Edition

Kenya Standard — Paper and board — Testmethods Part 2: Determination of Ash

content, First Edition

Kenya Standard — Paper and board — Testmethods Part 3: Determination of Machine

direction, First Edition

Kenya Standard — Paper and board — Test

methods Part 4: Determination of Top-side

and Wire Side, First Edition


methods Part 6: Determination of bursting

strength, First Edition

Kenya Standard — Paper and board — Testmethods Part 7: Determination of folding

endurance,First Edition

KS 420-8: 2010

KS 420-9: 2010

KS 420-10: 2010

KS 420-11: 2010

KS 420-12: 2010

KS 420-13: 2010

KS 420-14: 2010

KS 420-15: 2010

KS 420-16: 2010

KS 420-17: 2010

KS ISO 1382:2008

KS 1309-1:2010

Environment

KS 2206: 2010

KS ISO 11014:2009

KS ISO 15270: 2008

KS ISO 14644-6: 2007

KS ISO 2846-1:2006

KS ISO 2846-2:2007

KS 2230: 2010

KS 2231: 2010

Food

KS ISO 24276: 2006

KS ISO TS 21098: 2005

Kenya Standard — Paper and board — Testmethods Part 8: Determination of tearing

resistance, First Edition

Kenya Standard — Paper and board — Testmethods Part 9: Determination of sizingproperties, First Edition

Kenya Standard — Paper and board — Testmethods Part 10: Determination of waterabsorption— Cobb method,First Edition

Kenya Standard — Paper and board — Testmethods Part 11: Determination of waterabsorbency — Drop method,First Edition

Kenya Standard — Paper and board — Testmethods Part 12: Determination of oil

absorbency, Firs Edition

Kenya Standard — Paper and board — Testmethods Part 13: Determination of opacity,First Edition

Kenya Standard — Paper and board — Testmethods Part 14: Determination of

brightness (ISO brightness), First Edition

Kenya Standard — Paper and board — Testmethods Part 15: Determination of

roughness by constant-pressure air flow

method,First Edition

Kenya Standard — Paper and board — Testmethods Part 16: Determination of fibre

composition (furnish) qualitative test, FirstEdition


methods Part 17: Determination of thicknessfor single sheets, bulk thickness and

apparent density, First Edition

Kenya Standard — Rubber — Vocabulary,Second Edition

Kenya Standard — Diesel fuels —

Specification Part 1: Automotive gas oil,Third Edition

Kenya Standard — Glossary of terms

relating to chemical and radiation hazards,

First Edition

Kenya Standard — Safety Data sheet for

chemical products, First Edition

Kenya Standard — Guidelines for recovery

& recycling of plastic waste, First Edition

Kenya Standard — Clean rooms &

associated controlled environments, part

6:Vocabulary, First Edition

Kenya Standard — Graphic technology-

colour and transparency of printing ink sets

for colour printing Part 1: Sheet-fed and

heat-set web offset lithographic printing,

Second Edition

Kenya Standard — Graphic technology-

colour and transparency of printing ink sets

for colour printing Part 2: Coldset offset

lithographic printing, Second Edition

Kenya Standard — Soap noodles —

Specification, First Edition

Kenya Standard — Antibacterial Bathing

Bars — Specification, First Edition

Kenya Standard — Foodstuffs - Methods of

analysis for detection of genetically

modified organisms and derived products -

General requirements and definitions, First

Edition




Information to be supplied and procedure

for the addition of Methods to ISO 21569,

ISO 21570, or ISO 21571, First Edition


KS ISO 21569: 2005

KS ISO 21570: 2005

KS ISO 21571: 2005

KS ISO 21572: 2005

KS 1095: 2009

KS ISO 6576: 2004

KS ISO 6571: 2008

KS ISO 7540: 2006

KS ISO 8589: 2007

KS ISO 13300-1: 2006

KS ISO 13301: 2002

KS ISO 8586-2: 2008

KS ISO 10399: 2004

KS ISO 11037: 1999

KS ISO 5492: 2008

KS ISO 11056: 1999

KS 2194: 2010

KS 1930:2010

KS 686:2010

KS 168:2010

KS 169:2010

KS 1808:2010

KS 172:2010

KS 524:2010

KS CAC STAN 249 :

2006




Qualitative nucleic acid based methods,

First Edition




Quantitative nucleic acid based methods,

First Edition


analysis for detection of geneticallymodified organisms and derived products -Nucleic acid extraction, First Edition

Kenya Standard — Foodstuffs - Methods ofanalysis for detection of geneticallymodified organisms and derived products -

Protein based methods, First Edition

Kenya Standard — Food seasoning mixtures— Specification, Third Edition

Kenya Standard — Laurel Whole and

Ground leaves — Specification, SecondEdition

Kenya Standard — Spices Condiments andherbs — Determination of Volatile oilContent (Hydro distillation method), SecondEdition

Kenya Standard — Ground Paprika(Capsicum annuum L.) — Specification, First

Edition

Kenya Standard — Sensory Analysis -Design of Test rooms, First Edition

Kenya Standard — Sensory analysis - Staff

responsibilities, First Edition

Kenya Standard — Sensory Analysis

Methodology (3 AFC) Forced ChoiceProcedure, First Edition

Kenya Standard — Sensory AnalysisGeneral guidance for the selection andmonitoring assessors Part 2: ExpertAssessors, Second Edition

Kenya Standard — Sensory AnalysisMethodology - Duo — Trio Test, SecondEdition

Kenya Standard — Sensory Analysis

Methodology -General Guidance andMethod for assessment of colour in foods,Second Edition

Kenya Standard — Sensory Analysis —Vocabulary, Second Edition

Kenya Standard — Sensory AnalysisMethodology - Magnitude Estimationmethod, Second Edition

Kenya Standard — Good manufacturingpractice guidelines for the dairy industry,First Edition

Kenya Standard —_— Nutrient-rich

concentrated foods — Specification, SecondEdition

Kenya Standard — Peanut Butter —Specification, Third Edition

Kenya Standard — Dry Milled Maizeproducts — Specification, Fourth Edition

Kenya Standard — Wheat Flour -Specification, Fourth Edition

Kenya Standard — Composite Flour —-Specification, Third Edition

Kenya Standard — Bread — Specification,Fourth Edition

Kenya Standard — Pasta — Specification,Fourth Edition

Kenya Standard — Codex Standard for

Instant Noodles, First Edition

KS CAC/RCP66:2008

KS 458: 2010

KS 59-2: 2010

KS ISO 16634-1:2008

KS ISO 17372:2008

KS ISO 4833: 2003

KS ISO 4832: 2006

KS ISO 4831: 2006

KS ISO 6888-1:1999

KS ISO 6888-2:1999

KS ISO 6888-3:2003

KS ISO 6579:2002

KS ISO 6579:2002/

Amd 1:2007

KS ISO 21527-1: 2008

KS ISO 21527-2:2008

Kenya Standard — Code of hygienic

practice for powdered formulae for infants

and young children, First Edition

Kenya Standard — Common salt andmineral supplements for livestock-Specification, Third Edition

Kenya Standard — Sausages - SpecificationPart 2: Raw or cooked poultry sausages,Second Edition

Kenya Standard — Food products —Determination of the total nitrogen contentby combustion according to the Dumas

principle and calculation of the crude proteincontent Part 1: Oilseeds and animal feedingstuffs, First Edition

Kenya Standard — Animalfeeding stuffs —Determination of zearalenone byimmunoaffinity column chromatography

and high performance liquidchromatography, First Edition

Kenya Standard — Microbiology of foodand animal feeding stuffs — Horizontalmethod for the enumeration ofmicroorganisms — Colony-count technique

at 30 °C, First Edition

Kenya Standard — Microbiology of foodand animal feeding stuffs -- Horizontalmethod for the enumeration of coliforms --Colony-count technique, First Edition

Kenya Standard — Microbiology of foodand animal feeding stuffs — Horizontalmethod for the detection and enumeration of

coliforms — Most probable numbertechnique, First Edition

Kenya Standard — Microbiology of foodand animal feeding stuffs -- Horizontal

method for the enumeration of coagulase-positive staphylococci (Staphylococcus

aureus and other species) Part 1: Techniqueusing Baird-Parker agar medium, FirstEdition

Kenya Standard — Microbiology of foodand animal feeding stuffs -- Horizontal

method for the enumeration of coagulase-

positive staphylococci (Staphylococcusaureus and other species) Part 2: Techniqueusing rabbit plasma fibrinogen agarmedium, First Edition

Kenya Standard — Microbiology of foodand animal feeding stuffs — Horizontal

method for the enumeration of coagulase-positive staphylococci (Staphylococcusaureus and other species) Part 3: Detectionand MPN technique for low numbers, First

Edition

Kenya Standard — Microbiology of food

and animal feeding stuffs — Horizontalmethod for the detection of Salmonella spp,First Edition

Kenya Standard — Annex D: Detection ofSalmonella spp. in animal faeces and inenvironmental samples from the primaryproduction stage, First Edition

Kenya Standard — Microbiology of foodand animal feeding stuffs — Horizontal

method for the enumeration of yeasts andmoulds Part 1: Colony count technique inproducts with water activity greater than0,95, First Edition

Kenya Standard — Microbiology of food

and animal feeding stuffs — Horizontal

method for the enumeration of yeasts and

moulds Part 2: Colony count technique in

products with water activity less than or

equal to 0,95, First Edition


KS 2218:2010

KS 2219:2010

KS 2220:2010

KS 2191: 2010

KS 2193: 2010

KS Codex Stan

264 : 2006

KS 425: 2010

KS 1642: 2010

KS 1565: 2010

KS ISO 712:2009

KS ISO 6540:1980

KS ISO 24557:2009

Mechanical Engineering

KS ISO 1452-1:2009

KS ISO 1452-2:2009

KS ISO 1452-3:2009

KS ISO 1452-4:2009

KS ISO 1452-5:2009

KS ISO 22391-1:2007

KS ISO 22391-2:2007

KS ISO 22391-3:2007

KS ISO 22391-5:2007

KS ISO 5171: 2009

KS ISO 3821: 2009

Kenya Standard — Calcium nitratefertilizer — Specification, First Edition

Kenya Standard — Zinc sulphate fertilizer

— Specification, First Edition

Kenya Standard — Magnesium sulphate

fertilizer — Specification, First Edition

Kenya Standard — Pasteurized goat milk

— Specification; First Edition

Kenya Standard — Mozzarella cheese —Specification; First Edition

Kenya Standard — Codex standard fordanbo Fifth Edition

Kenya Standard — Specification for dried

prawns (Shrimps) Second Edition

Kenya Standard — Specification for frozen

tuna loin Second Edition

Kenya Standard — Frozenfillets of cuttle

fish and tubes of squids — SpecificationSecond Edition

Kenya Standard — Cereals and cereal

products — Determination of moisturecontent — Reference method,First Edition

Kenya Standard — Maize - Determination

of moisture content (on milled grains and onwhole grains), First Edition

Kenya Standard — Pulses — Determination

of moisture content — Air-oven method,First Edition

Kenya Standard — Plastic piping systems —

Polyethylene (PE) Pipes and fittings for

water supply Part 1: General, First Edition



water supply Part 2: Pipes, First Edition



water supply Part 3: Fittings, First Edition



water supply Part 4: Valves, First Edition



water supply Part 5: Fitness for the purpose,

First Edition

Kenya Standard — Plastics piping systems

for hot and cold water installations —

Polyethylene of raised temperature

resistance (PE-RT) Part 1: General, First

Edition




resistance (PE-RT) Part 2: Pipes, First

Edition




resistance (PE-RT) Part 3: Fittings, First

Edition




resistance (PE-RT) Part 5: Fitness for

purpose of the system, First Edition

Kenya Standard — Pressure gauges used in

welding, cutting and allied processes, First

Edition

Kenya Standard — Rubber hoses for

welding, cutting and allied processes, First

Edition

KS ISO 2503: 2009

KS 2180:2010

KS 2223: 2010

KS 2212: 2010

KS 1757:2010

KS ISO 16528-1:2007

KS ISO 18373-1:2007

KS ISO 7387-1:1983

KS ISO 9311-1:2005

KS ISO 3126:2005

KS ISO 11922-1:1997

KS ISO 16135:2006

KS ISO 7686:2005

KS ISO TR 4191:1989

KS 1320: 2010

KS ISO 24415-1:2009

KS ISO 1167-1:2006

KS ISO 1167-2:2006

KS ISO 2505:2005

KS ISO 6259-1:1997

KS ISO 6259-2:1997

Kenya Standard — Gas welding equipment— Pressure regulators and pressure

regulators with flow-metering devices for

gas cylinders used in welding, cutting and

allied processes up to 300 bar, First Edition

Kenya Standard — Road tankers forpetroleum-based flammable liquids —


Kenya Standard — Inspection andtesting of

LPG roadtankers, First Edition

Kenya Standard — Binding wire —


Kenya Standard — Inspection and repair of

boilers — Codeofpractice, First Edition

Kenya Standard — Boilers and pressure

vessels Part 1: Performance requirements,First Edition

Kenya Standard — Rigid PVC pipes —

Differential scanning calorimetry (DSC)

method Part 1: Measurement of the

processing temperature, First Edition

Kenya Standard — Adhesives with solvents

for assembly of u PVC pipe elements —

Characterization Part 1: Basic test methods,First Edition

Kenya Standard — Adhesives for

thermoplastic piping systems Part 1:

Determination of film properties, First

Edition

Kenya Standard — Plastics piping systems —

Plastics components — Determination of

dimensions, First Edition

Kenya Standard — Thermoplastics pipes for

the conveyance of fluids — Dimensions and

tolerances — Part 1: Metric series, FirstEdition

Kenya Standard — Industrial valves — Ball

valves of thermoplastics materials, First

Edition

Kenya Standard — Plastics pipes and

fittings — Determination of opacity, FirstEdition

Kenya Standard — Unplasticized polyvinyl

chloride (PVC-U)pipes for water supply —Recommended practice for laying, First

Edition

Kenya Standard — Wheelchairs — Foldableand Fixed Wheelchairs — Specification

(Third Edition)

Kenya Standard — Tips for walking aids —

Requirements and test methods — Part 1:

Frictionoftips, First Edition

Kenya Standard — Thermoplastics pipes,

fittings and assemblies for the conveyance

of fluids — Determination of the resistance

to internal pressure — Part 1:General

method,First edition

Kenya Standard — Thermoplastics pipes,

fittings and assemblies for the conveyance

of fluids — Determination of the resistance

to internal pressure — Part 1:General

method,First edition

Kenya Standard — Thermoplastics pipes —Longitudinal reversion — Test method and

parameters, First Edition

Kenya Standard — Thermoplastics pipes —

Determination of tensile properties — Part

1: General test method, First Edition

Kenya Standard — Thermoplastics pipes —

Determination of tensile properties — Part

2: Pipes made of unplasticized poly(vinyl

chloride) (PVC-U), chlorinated poly(vinyl


KS ISO 13844:2000

KS ISO 13845:2000

KS ISO 13846:2000

KS ISO 16136:2006

KS ISO 16137:2006

KS ISO 16138:2006

KS ISO 21787:2006

KS ISO 13783:1997

KS 201:2010

Civil Engineering

KS 2168-1: 2009

KS 2168-2: 2009

KS 828: 2009

KS 761:2010

KS 1244:2010

KS 448:2010

KS 1464-1:2010

KS 1464-2:2010

KS 1464-3:2010

KS 2222:2010

KS 301:2:2010

chloride) (PVC-C) and high-impactpoly(vinyl chloride) (PVC-H]),First Edition


— Elastomeric-sealing-ring-type socket

joints of unplasticized poly(vinyl chloride)

(PVC-U) for use with PVC-U pipes — Test

method for leaktightness under negative

pressure, First edition

Kenya Standard — Plastics piping systems— Elastomeric-sealing-ring-type socket

joints for use with unplasticized poly(vinyl

chloride) (PVC-U) pipes — Test method for

leaktightness under internal pressure and

with angular deflection, First edition


— End-loadbearing and non-end-load-

bearing assemblies and joints for

thermoplastics pressure piping — ‘Test

method for long-term leaktightness under

internal water pressure, First edition

Kenya Standard — Industrial valves —

Butterfly valves of thermoplastics materials,

First edition


Check valves of thermoplastics materials,

First edition

Kenya Standard — Industrial valves —Diaphragm valves of thermoplastics

materials, First edition


Globe valves of thermoplastics materials,

First Edition

Kenya Standard — Plastics piping systems —

Unplasticized poly(vinyl chloride) (PVC-U)

end-load-bearing double-socketjoints - Test

method for leaktightness and strength while

subjected to bending and internal pressure,First Edition

Kenya Standard - Unified valve for

liquiefied petroleum gas cylinders —-

Specification, Fourth Edition

Kenya Standard — Masonry cement Part 1:

Composition, Specifications and conformitycriteria, First Edition

Kenya Standard — Masonry cement Part 2:

Test methods, First Edition

Kenya Standard — Structural use of timber

Part 1: Code of practice for permissible

stress design, materials and workmanship,

Second Edition

Kenya Standard — Pressed steel tanks —


Kenya Standard — Clay window sills —Specification, First Edition

Kenya Standard — Wood mosaic parquet —


Kenya Standard — Waste stabilization

ponds - Code of practice Part 1: anaerobic

type, First Edition


ponds - Code of practice Part 2: facultative

type, First Edition


ponds - Code of practice Part 3: Maturation

type, First Edition

Kenya Standard — Synthetic resin

adhesives for plywood — Specification,

First Edition

Kenya Standard — Plywood —

Specification Part 2: Marine plywood, First

Edition

KS 301:1:2010

KS 301:3:2010

KS 2226:2010

KS ISO 4140: 1979

KS ISO 4943: 1985

KS ISO 10700: 1994

KS ISO 4945: 1977

KS ISO 10720: 1997

KS ISO 9556: 1989

KS ISO 4829/1: 1986

KS ISO 6927:1981

KS ISO 7389:2002

KS ISO 7390:2002

KS ISO 7727:1984

KS ISO 7728:1985

KS ISO 7729:1985

KS ISO 7844:1985

KS ISO 9882:1993

KS ISO 9883:1993

Kenya Standard — Specification forplywood — Specification Part 1: Interior

and exterior use, First Edition

Kenya Standard _— Plywood—

Specification Part 3: shuttering work

plywood,First Edition

Kenya Standard - Plywood — Methods oftest, First Edition

Kenya Standard — Ferrochromium and

ferrosilicochromium — Determination of

chromium content -- Potentiometric method,

First Edition

Kenya Standard — Steel and cast iron —

Determination of copper content — Flame

atomic absorption spectrometric method,First Edition

Kenya Standard — Steel and iron —-

Determination of manganese content —

Flame atomic absorption spectrometric

method, First Edition

Kenya Standard — Steel — Determination

of nitrogen content — Spectrophotometric

method, First Edition

Kenya Standard — Steel and iron -

Determination of nitrogen content —

Thermal conductimetric method after fusion

in a current ofinert gas, First Edition


Determination of total carbon content —

Infrared absorption method after combustion

in an induction furnace, First Edition


Determination of total silicon content —

Reduced molybdosilicatespectrophotometric method — Part 1: Silicon

contents between 0.05 and 1.0%, First

Edition

Kenya Standard — Building construction --

Jointing products -- Sealants — Vocabulary,First Edition


Jointing products -- Determination of elasticrecovery ofsealants, First Edition


Jointing products -- Determination of

resistance to flow of sealants, First Edition

Kenya Standard — Joints in building --Principles for jointing of building

components -- Accommodation of

dimensional deviations during construction,First Edition

Kenya Standard — Typical horizontal

joints between an external wall of

prefabricated ordinary concrete components

and a concrete floor - Propetties,

characteristics and classification criteria,First Edition

Kenya Standard — Typical vertical joints

between two prefabricated ordinary concrete

external wall components -- Properties,

characteristics and classification criteria,First Edition


Jointing products -- Determination of

resistance to flow of sealants, First Edition

Kenya Standard — Performance standardsin building -- Performance test for precast

concrete floors -- Behaviour under non-

concentrated load, First Edition

Kenya Standard — Performance standards

in building -- Performance test for precast

concrete floors -- Behaviour under

concentrated load, First Edition


Textile and General Consumer Engineering

KS 2108-2: 2009 Kenya Standard — Disposable baby diapers

— Specification, Second Edition

KS 892-1: 2009 Kenya Standard — Fabrics for curtains and

drapes - Specification Part 1: Wovenfabrics,Third Edition

KS 893-1: 2009 Kenya Standard — Upholstery fabrics -

Specification Part 1: Woven and knitted

fabrics, Second Edition

KS ISO 105 A02:1993 Kenya Standard — Textiles - Tests for

colour fastness Part A02: Grey scale forassessing change in colour, First Edition

KS ISO 105 A03:1993 Kenya Standard —- Tests for colour

fastness Part AO2: Grey scale for assessingstaining, First Edition


colour fastness Part A04: Method for the

instrumental assessment of the degree of

staining of adjacent fabrics, First Edition


colour fastness Part A08: Vocabulary used

in colour measurement, First Edition

KS ISO 105 BO1:1994 Kenya Standard — Textiles - Tests for

colour fastness Part BO1: Colour fastnes to

light: Daylight, First Edition

KS ISO 105 B02: 1994 Kenya Standard — Textiles - Tests for

colour fastness Part BO2: Colour fastness to

artificial light: Xenon arc fading lamptest,

First Edition

KS ISO 13434:2008 Kenya Standard - Geosynthetics -

Guidelines for the assessment of durability,

First Edition

KS ISO 13938-1:1999 Kenya Standard - Textiles - Bursting

properties of fabrics Part 1: Hydraulic

method for the determination of bursting

strength and bursting distension, First

Edition

KS ISO 13938-2:1999 Kenya Standard — Textiles - Bursting

properties of fabrics Part 2: Pneumatic

method for determination of bursting

strength and bursting distension, First

Edition

Electrotechnical

KS 2112-1: 2009 Kenya Standard — Electrical Security

Systems Part 1: General, First Edition


Systems Part 2: Access Control, First

Edition

KS 2112-2-1: 2009 Kenya Standard — Electrical Security

Systems Part 2-1: Access control systems:

General characteristics, First Edition



Central Processor, First Edition



Card Readers, First Edition



Reader Controllers, First Edition



Biometric Readers, First Edition



Access Cards, First Edition



Barriers, First Edition


Installations Part 3: Electrical Security

Fences (Nonlethal), First Edition

KS IEC 60669-1:1998

KS IEC 60669-2-1:2002

KS IEC 60669-2-2:2006

KS IEC 60669-2-3:2006

KS IEC 60669-2-4:2004

KS ISO IEC 18028-1:

2006

KS ISO IEC 18028-2:

KS ISO IEC 18028-3:

2005

KS ISO IEC 18028-4:

2005

KS ISO IEC 18028-5:

2006

KS ISO IEC 24767-1:

2008

KS IEC 6203 1:2008

Kenya Standard — Switches for householdand similar fixed electrical installations Part

1: General requirements, First Edition


2-1: Particular requirements — Electronic

switches, First Edition

Kenya Standard — Switches for household

and similar fixed electrical installations Part

2-2: Particular requirements -

Electromagnetic remote-control switches,First Edition

Kenya Standard — Switches for household

and similar fixed electrical installations Part

2-3: Particular requirements — Time delay

switches, First Edition


2-4: Particular requirements - Isolatingswitches, First Edition

Information Technology — Security

techniques — I.T network security Part 1:

Network security management, First Edition

2006 Information Technology — Security


Networksecurity architecture, First Edition



Securing communications between networks

using security gateways, First Edition


techniques — I.T network security Part 4:Securing remote access, First Edition



Securing communications across networksusing virtual private networks, First Edition

Information technology — Home network

security Part 1: Security requirements, First

Edition

Kenya Standard — LED modules forgeneral lighting -Safety specifications, First

Edition

KS IEC/PAS 62612:2009 Kenya Standard — Self-ballasted LED-

KS ISO IEC TR 24762:

2008

KS ISO IEC TR 24741:

2007

KS ISO IEC TR 15443-1:

2005

KS ISO IEC TR 15443-2:

2005

lamps for general lighting services —-

Performance requirements, First Edition

Kenya Standard — Information Technology

— security techniques; Guidelines for

Information and Communication

Technology disaster recovery services, FirstEdition

Kenya Standard — Information technology— Biometricstutorial, First Edition

Kenya Standard — Information technology— Security techniques — A framework for

IT security assurance Part 1, Overview andframework,First Edition

Kenya Standard — Information technology— Security techniques — A framework for

IT security assurance Part 2, Assurance

methods, First Edition

KS ISO IEC TR 15443-3:2007 Kenya Standard — Information

technology — Security techniques — Aframework for IT security assurance Part 3,

Analysis of assurance methods, First Edition


KS ISO IEC 2382-36:

2008

KS ISO 1087-2:2000

Services

KS 2204: 2009

KS 2205: 2009

KS ISO 8421-1:1987

KS ISO 8421-2:1987

KS ISO 8421-3:1989

KS ISO 8421-4:1990

KS ISO 8421-5:1988

KS ISO 8421-6:1987

KS ISO 8421-7:1987

KS ISO 8421-8:1990

KS 2181-2: 2009

KS ISO/TR 22411: 2008

KS ISO 11228-2: 2007

KS ISO 11228-3: 2007

KS ISO 10957:2009

KS ISO TR 28118: 2009

KS ISO 13606-1: 2008

KS ISO 13606-2:2008

KS ISO/TS 22220:2009

KS ISO 27799:2008

Kenya Standard — Information technology

— Vocabulary Part 36: Learning, educationand training, First Edition

Kenya Standard — Terminology work —

Vocabulary Part 2: Computer application,First Edition

Kenya Standard — Tourism accommodation

- Fire safety in hotels - Guidelines First

Edition

Kenya Standard — Tour operators, travel

agencies and related setvices -—Terminologies, First Edition

Kenya Standard — Fire protection —-

Vocabulary Part 1: General terms andphenomena offire, First Edition


Vocabulary Part 2: Structuralfire protection,First Edition


Vocabulary Part 3: Fire detection and alarm,First Edition

Kenya Standard —

Vocabulary Part 4:

equipment, First Edition


Vocabulary Part 5: Smoke control, First

Edition


Vocabulary Part 6: Evacuation and means ofescape, First Edition


Vocabulary Part 7: Explosion detection andsuppression means, First Edition


Vocabulary Part 8: Terms specific to fire

fighting rescue services and handling of

hazardous materials, First Edition

Fire protection —

Fire extinction

Kenya Standard — Tourism services —Hotels and related establishments - Grading

requirements Part 2: Domestic guest houses

(Homestay), First Edition

Kenya Standard — Ergonomics data and

guidelines for the application of ISO/IEC

Guide 71 to products and services to address

the needs of older persons and persons withdisability, First Edition

Kenya Standard — Ergonomics — Manual

handling Part 2: Pushing and pulling, First

Edition

Kenya Standard — Ergonomics — Manual

handling Part 3: Handling of low loads at

high frequency, First Edition

Kenya Standard — Information and

documentation — International standardmusic number (ISMN), First Edition

Kenya Standard — Information and

documentation — Performance indicatorsfor national libraries, First Edition

Kenya Standard — Health informatics --

Electronic health record communication Part

1: Reference model, First Edition


Electronic health record communication Part

2: Archetype interchange specification, First

Edition

Health Informatics -- Identification ofsubjects of health care, First Edition


Information security management in healthusing ISO/IEC 27002, First Edition

KS ISO 20302:2006

KS ISO 17090-1:2008

KS ISO 20301:2006

KS ISO/TR 20514:2005

KS 2213:2009

KS 2214:2009

KS 2215:2009

KS ISO 20022-6:2009

KS ISO 22307:2008

KS ISO 13616-2:2007

KS ISO 13492:2007

KS ISO GUIDE 73:2009

KS ISO 31000:2009

KS IEC/ISO 31010:2009

KS ISO 8532:1995

KS ISO 7250-1:2008

KS 2181-3:2010 Kenya

KS 2181-4:2010 Kenya

KS 2181-5:2010 Kenya

KS 2181-6:2010

KS 2181-7:2010

KS 2181-8:2010

KS 2181-9:2010


Health cards -- Numbering system and

registration procedure for issuer identifiers,First Edition.


Public key infrastructure -- Part 1: Overview

of digital certificate services, First Edition

Kenya Standard — Health informatics —

Health cards — General characteristics, FirstEdition

Kenya Standard — Health informatics —

Electronic health record — Definition, scope

and context, First Edition

Kenya Standard — Sustainability

management of natural protected areas —Code ofpractice, First Edition

Kenya Standard — Adventurous tourism —

Tour leader — Personal competency, FirstEdition

Kenya Standard — Codeofpractice for tourguides, First Edition

Kenya Standard — Financial services —Universal Financial Industry message

scheme Part 6: Message TransportCharacteristics, First Edition

Kenya Standard — Financial Services —

Privacy Impact Assessment, First Edition

Kenya Standard — Financial services —

International Bank Account Number(BAN) Part 2: Role and responsibilities of

the Registration Authority, First Edition

Kenya Standard — Financial Services —Key management related data element-application and usage of ISO 8583 dataelements 53 AND 96, First Edition

Kenya Standard — Risk Management —Vocabulary, First Edition

Kenya Standard — Risk management —Principles and guidelines, First Edition

Kenya Standard — Risk Management —

Risk Assessment Techniques, First Edition

Kenya Standard — Securities — Format for

transmission of certificate numbers, FirstEdition

Kenya Standard — Basic human bodymeasurements for technological design —

Part 1: Body measurement definitions andlandmarks, First Edition

Standard — Tourism services — Hotels andrelated establishments grading requirements

Part 3: Commercial guest houses, FirstEdition

Standard — Tourism services — Hotels andrelated establishments grading requirementsPart 4: Self-catering establishments, FirstEdition

Standard — Tourism services — Hotels andrelated establishments grading requirementsPart 5: Motels, First Edition

Kenya Standard — Tourism services —Hotels and related establishments gradingrequirements Part 6: Lodges, First Edition

Kenya Standard — Tourism services —Hotels and related establishments grading

requirements Part 7: Restaurants, FirstEdition


requirements Part 8: Villas and servicedapartments, First Edition


requirements Part 9: Tented camps, FirstEdition


KS 2181-11:2010

KS 2181-12:2010

KS 2217-3:2010

KS 2217-4:2010

Agriculture

KS 689: 2009

KS 2086: 2009

KS 2063:2009

KS 2064: 2009

KS 2128: 2009

KS CAC/RCP 54-2009

KS ISO 5983-2:2009

KS ISO 6869:2000

KS ISO 30024:2009

KS ISO 6651:2001

KS ISO 6865:2000

KS 1690:2010

KS 2228:2010

KS ISO 16002:2004

KS ISO 7971:1:2009

KS ISO 7971:3:2009

KS ISO 2171:2007

KS.ISO 20483 :2006

KS EAS 738:2010

KS EAS 739:2010


requirements Part 11: Hostels, First Edition


requirements Part 12: Holiday cottages, FirstEdition

Kenya Standard — Glossary of terms usedin the education sector — Part 3: Secondaryeducation, First Edition

Kenya Standard — Glossary of terms used

in the education sector — Part 4: Specialeducation, First Edition

Kenya Standard — Pure variety milled rice,Third Edition

Kenya Standard — Varieties blend milledrice, Second Edition

Kenya Standard — Cassava Chips -Specification, First Edition

Kenya Standard — Cassava Pellets —Specification, First Edition

Kenya Standard — Tea Industry — Code of

practice, First Edition

Kenya Standard — Code of Practice onGood Animal Feeding, First Edition

Kenya Standard — Animal feeding stuffs —

Determination of nitrogen content andcalculation of crude protein content — Part

2: Block digestion and steam distillationmethod, First Edition


Determination of the contents of calcium,copper, iron, magnesium, manganese,potassium, sodium and zinc — Method

using atomic absorption spectrometry, FirstEdition

Kenya Standard — Animal feeding stuffs —Determination of phytase activity, FirstEdition

Kenya Standard — Animalfeeding stuffs --Semi-quantitative determination of aflatoxinB1 -- Thin-layer chromatographic methods,

First Edition


Determination of crude fibre content —Method with intermediate filtration, FirstEdition

Kenya Standard — Rock phosphatefertilizer-Specification, First Edition

Kenya Standard — Foliar fertilizer(inorganic) -Specification; First Edition

Kenya Standard — Stored Cereal grains andpulses: guidance on the detection ofinfestation by live invertebrates by trapping;First Edition

Kenya Standard — Cereals-determination

of Bulk density, called mass per hectoliter.Part 1: Reference method, First Edition

Kenya Standard — Cereals-determination ofBulk density, called mass per Hectoliter Part3: Routine method, First Edition

Kenya Standard — Cereals, pulses and by -products-determination of ash yield byincineration, First Edition

Kenya Standard — Cereals and pulses:determination of nitrogen content and

calculation of crude protein content: kjeldahlmethod, First Edition

Kenya Standard — Fresh sweet cassava —

Specification; First Edition

Kenya Standard — Dried cassava chips —


KS EAS 740:2010

KS EAS 741:2010

KS EAS 742:2010

KS EAS 743:2010

KS EAS 744:2010

KS EAS 745:2010

KS EAS 746:2010

KS EAS 747:2010

KS EAS 748:2010

Trade Affairs Department

KS ISO 13616-1:2007

KS ISO 10962: 1997

KS ISO 15782-1:2009

EAC/COMESA

Electrotechnology

KS 1864:2010

KS 1876-1:2010

KS 1876-2:2010

KS 1877:2010

KS 1878-0:2010

KS 1878-1:2010

KS 1878-2-3:2010

KS 1878-3:2010

Kenya Standard — Cassava flour, FirstEdition

Kenya Standard — Cassava wheat

composite flour -— Specification, First

Edition

Kenya Standard — Food grade cassava

starch — Specification; First Edition

Kenya Standard — Cassava crisps —Specification ; First Edition

Kenya Standard — Cassava and cassava

products — Determination of total cyanogens— enzymatic assay method; First Edition

Kenya Standard — Potato


crisps —

Kenya Standard — Frozen potato chips —Specification; First Edition

Kenya Standard — Fried potato chips —


Kenya Standard — Fresh potato tuber (warepotato tuber) — Specification; First Edition

Kenya Standard — Financial services —

International bank account number (IBAN)

— Part 1: Structure of the IBAN, First

Edition

Kenya Standard — Securities and relatedfinancial instruments -- Classification of

Financial Instruments (CFI code), First

Edition

Kenya Standard — Certificate management

for financial services -- Part 1: Public keycertificates, First Edition

Kenya Standard — Battery chargers —

Performance

Kenya Standard — Electrical power

transmission and distribution — Overhead

power lines for conditions prevailing in

Kenya — Part 1: Code of practice


transmission and distribution — Overheadpower lines for conditions prevailing in

Kenya — Part 2: Safety


transmission and distribution — Guidelines

for the application design, planning and

construction of medium voltage overhead

power lines up to and including 22 kV,

using wooden pole structures and bare

conductors



for the provision of electrical distribution

networks in residential areas — Part 0:

Definitions





Planning and design ofdistribution systems




networks in residential areas — Part 2-3:

Preferred methods and materials for the

installation of overhead powerlines


transmission and distribution — Guidelinesfor the provision of electrical distribution


Overhead distribution in very low, low and


KS 2236-1:2010

KS 2236-2:2010

KS 2236-3:2010

KS 2236-4:2010

KS 1859-1:2010

KS 1859-2:2010

KS 1859-3:2010

KS 1859-5:2010

KS 1883:2010

KS 1902:2010

KS 1917:2010

KS IEC 60826:2003

KS IEC 61284:1997

KS IEC/TR 60736:1982

KS IEC 62053-52:2005

KS IEC 61854:1998

KS IEC 61865:2001

KS IEC 61109:1992

KS IEC/TR 62263:2005

moderate consumption areas, including rural

areas and informalsettlements

Kenya Standard — Electricity supply —

Quality of supply — Part 1: Minimum

standards


Quality of supply — Part 2: Reportingguidelines


Quality of supply — Part 3: Voltage

characteristics, compatibility levels, limits

and assessment methods

Kenya Standard — Electricity supply —Quality of supply — Part 4: Application

guidelinesforutilities

Kenya Standard — Electrical powertransmission and distribution — High-

voltage operating regulations — Part 1:Definitions


transmission and distribution — High-

voltage operating regulations — Part 2:

Voltage colour coding for diagrammatic

displays in control rooms — Colour coding

for wall-mounted operating diagrams and

electronic displays relating to the generation,

transmission anddistribution ofelectricity

Kenya Standard — Electrical powertransmission and distribution — High-


Model regulations — Recommended model

regulations relating to power systems for

operating, access control and supervision of

systems that exceed 1000 V, for the

transmission anddistribution ofelectricity


transmission and distribution — High-


Standard procedure and terminology for theissuing of operating instructions


transmission and distribution — Overheadpower lines — Installation of line

conductors


transmission and distribution — Code of

practice for animal deterrents for electric

powersupply substations

Kenya Standard — Electric power

transmission and distribution — Energized

powerlines — Maintenance methods

Kenya Standard — Design criteria of

overhead transmission lines

Kenya Standard — Overhead powerlines —

Requirements and tests for fittings

Kenya Standard — Testing equipment for

electrical energy meters

Kenya Standard — Electricity metering

equipment (AC) — Particular requirements

— Part 52: Symbols

Kenya Standard — Overhead powerlines —

Requirements and tests for spacers

Kenya Standard — Overhead power lines —

Calculation of the electrical component of

distance between live parts and obstacles —

Methodofcalculation

Kenya Standard — Insulators for overhead

lines — Composite suspension and tension

insulators for a.c. systems with a nominalvoltage greater than 1000 V — Definitions,

test methods and acceptancecriteria

Kenya Standard —

Guidelines for the

Live working —

installation and

KS CISPR 11:2009

KS CISPR 12:2009

KS CISPR 13:2009

KS CISPR 14-1:2009

KS IEC CISPR 14-2:

2008

KS CISPR 15:2009

KS IEC CISPR 16-1-1:

2010


2006


2004


2010


2003

CISPR 16-2-1:2008

CISPR 16-2-2:2005

maintenance of optical fibre cables onoverhead powerlines

Kenya Standard — Industrial, scientific andmedical (ISM) radio-frequency equipment

—_— Electromagnetic disturbance

characteristics — Limits and methods ofmeasurement

Kenya Standard — Vehicles, boats andinternal combustion engines — Radio

disturbance characteristics — Limits and

methods of measurement for the protectionof off-board receivers

Kenya Standard — Sound and television

broadcast receivers and associated

equipment —_— Radio disturbancecharacteristics — Limits and methods of

measurement

Kenya Standard — Electromagnetic

compatibility — Requirements for

household appliances, electric tools andsimilar apparatus— Part 1: Emission

Kenya Standard — Electromagnetic

compatibility — Requirements for

household appliances, electric tools and

similar apparatus — Part 2: Immunity —

Product family standard

Kenya Standard — Limits and methods of

measurement of radio disturbancecharacteristics of electrical lighting andsimilar equipment

Kenya Standard — Specification for radiodisturbance and immunity measuring

apparatus and methods — Part 1-1: Radiodisturbance and immunity measuring

apparatus — Measuring apparatus

Kenya Standard —Specification for radiodisturbance and immunity measuring


apparatus — Ancillary equipment —

Conducted disturbances

Kenya Standard — Specification for radio

disturbance and immunity measuring

apparatus and methods — Part 1-3: Radio



Disturbance power




Radiated disturbances



apparatus and methods — Part 1-5: Radio


apparatus — Antenna calibration test sites

for 30 MHz to 1 000 MHz


apparatus and methods — Part 2-1: Methods

of measurement of disturbances and

immunity — Conducted disturbance

measurements




of measurement of disturbances andimmunity — Measurement of disturbance

power



2010


2003




of measurement of disturbances andimmunity — Radiated disturbance

measurements




of measurement of disturbances andimmunity — Immunity measurements

KS IEC CISPR/TR 16-2-5:

2008

KS IEC CISPR/TR 16-3:

2003


apparatus and methods — Part 2-5: In situ

measurements for disturbing emissions

produced by physically large equipment



apparatus and methods — Part 3: CISPR

technical reports


2009


2003



apparatus and methods — Part 4-1:

Uncertainties, statistics and limit modelling

— Uncertainties in standardized EMCtests




— Uncertainty in EMC measurements


2007 Kenya Standard — Specification for radio




— Statistical considerations in the

determination of EMC compliance of mass-

produced products


2007 Kenya Standard — Specification for radiodisturbance and immunity measuring



— Statistics of complaints and a model for

the calculation oflimits for the protection of

radio services


2006

KS EAS 373:2005

KS IEC 60189-1:2007

KS IEC 60189-2:2007

KS IEC 60189-3:2007





— Conditions for the use of alternative test

methods

Kenya Standard — External TV aerials in

the frequency range 30 MHz to 1 GHz —

Specification

Kenya Standard — Low-frequency cables

and wires with PVC insulation and PVC

sheath — Part 1: General test and measuringmethods



sheath — Part 2: Cables in pairs, triples,

quads and quintuplesfor inside installations



sheath— Part 3: Equipment wires with solid

or stranded conductor wires, PVC insulated,

in singles, pairs andtriples

KS IEC 60958-1(2008-09)

KS IEC 60958-3(2009-12)

KS IEC 60958-4(2008-07)

KS IEC 61883-1(2008-02)

KS IEC 61883-2

(2004-08)

KS IEC 61883-3:2004

KS IEC 61883-5:2004

KS IEC 61883-6:2005

KS IEC 61883-8:2008

KS ISO/IEC 11801:2008

KS ISO/IEC 24702:2006

KS ISOAEC/TR 24704:

2004

KS ISO/AEC/TR 24746:

2005

KS ISO/AEC/TR 24750:

2007

KS ISO/IEC/TR 29106:2007 Kenya Standard —

KS IEC 60065:2005

KS IEC 60044-1:2003

KS IEC 60044-2:2003

KS IEC 60044-3:2002

KS IEC 60044-5:2004

KS IEC 60044-6: 1992

KS IEC 60044-7:1999

KS IEC 60044-8:2002

Kenya Standard — Digital audio interface— Part 1: General

Kenya Standard — Digital audio interface

— Part 3: Consumerapplications

Kenya Standard — Digital audio interface— Part 4: Professional applications

Kenya Standard — Consumer audio/video

equipment — Digital interface — Part 1:

General



SD-DVCRdata transmission


equipment — Digital interface — Part 3:HD-DVCRdata transmission


equipment — Digital interface — Part 5:SDL-DVCRdata transmission (TA4)



Audio and music data transmission protocol


equipment — Digital interface — Part 8:Transmission of ITU-R BT.601 style digital

video data


— Generic cabling for customer premises


— Generic cabling — Industrial premises

Kenya Standard — Information technology— Customer premises cabling for wireless

access points


— Generic cabling for customer premises

— Mid-span DTE powerinsertion

Kenya Standard — Information technology— Assessment and mitigation of installed

balanced cabling channels in order tosupport LOGBASE-T

Information

technology — Generic cabling —

Introduction to the MICE environmental

classification

Kenya Standard — Audio, video and similar

electronic apparatus — Safety requirements

Kenya Standard — Instrument transformers

— Part 1: Current transformers


— Part 2: Inductive voltage transformers


— Part 3: Combined transformers


— Part 5: Capacitor voltage transformers


— Part 6: Requirements for protective

current transformers for transient

performance

Kenya Standard — Instrument transformers— Part 7: Electronic voltage transformers


— Part 8: Electronic current transformers


KS IEC 60050-444: electrical appliances — Safety — Part 2-29:

2002 Kenya Standard — International Particular requirements for battery chargers

KS IEC 60050-445:

2002

KS IEC 60050-446:

1983

KS IEC 60076-1:2000

KS IEC 60076-2:1993

KS IEC 60076-3:2000

KS IEC 60076-4:2002

KS IEC 60076-5:2006

KS IEC 60076-6:2007

KS IEC 60076-7:2005

KS IEC 60076-8:1997

KS IEC 60076-10:2001

Electrotechnical Vocabulary — Part 444:

Elementary relays

Kenya Standard _— International

Electrotechnical Vocabulary — Part 445:

Specified time all-or-nothing relays

Kenya Standard _— International

Electrotechnical Vocabulary — Electrical

relays

Kenya Standard — Powertransformers —Part 1: General

Kenya Standard — Powertransformers —

Part 2: Temperature rise

Kenya Standard — Powertransformers —Part 3: Insulation levels, dielectric tests and

external clearancesin air

Kenya Standard — Power transformers —Part 4: Guide to the lightning impulse and

switching impulse testing — Power

transformers and reactors


Part 5: Ability to withstand short circuit

Kenya Standard — Powertransformers —Part 6: Reactors


Part 7: Loading guide for oil-immersed

powertransformers


Part 8: Application guide

Kenya Standard — Powertransformers —Part 10: Determination of sound levels

KS IEC 60076-10-1:2005 Kenya Standard — Power transformers —

KS IEC 60076-11:2004

KS IEC 60076-12:2008

KS IEC 60076-13:2006

KS IEC/TS 60076-14:

2004

Part 10-1: Determination of sound levels —

Application guide


Part 11: Dry-type transformers

Kenya Standard — Powertransformers —Part 12: Loading guide for dry-type

transformers

Kenya Standard — Power transformers —

Part 13: Self-protected liquid-filled

transformers

Kenya Standard — Power transformers —

Part 14: Design and application of liquid-

immersed power transformers using high-

temperature insulation materials

KLSIEC 60076-15:2008 Kenya Standard — Power transformers —

KS IEC 60269-1:2009

KS IEC 60269-2:2010

KS IEC 60269-3:2010

KS IEC 60269-4:2009

Part 15: Gas-filled power transformers

Kenya Standard — Low-voltage fuses —

Part 1: General requirements


Part 2: Supplementary requirements for

fuses for use by authorized persons (fuses

mainly for industrial application) —

Examples of standardized systems of fuses

AtoJ

Kenya Standard — Low-voltage fuses —Part 3: Supplementary requirements for

fuses for use by unskilled persons (fusesmainly for household and similar

applications) — Examples of standardized

systemsoffuses A to F


Part 4: Supplementary requirements for

fuse-links for the protection of

semiconductor devices

KS IEC 60335-2-29:2010 Kenya Standard — Household and similar


electrical appliances — Safety — Part 2-76:

Particular requirements for electric fence

energizers


KS IEC 60439-1:2004

KS IEC 60439-2:2005

KS IEC 60439-4:2004

KS IEC 60439-5:2005

KS IEC 60529:2001

KS IEC 60670-1:2002

KS IEC 60670-21:2004

KS IEC 60670-22:2003

KS IEC 60670-23:2006

KS IEC 60670-24:2005

KS IEC 60947-1:2007

KS IEC 60947-2:2009

KS IEC 60947-3:2005

KS IEC 60947-5-5:2005

KS IEC 60947-5-8:2006

KS IEC 60947-5-9:2006

electrical appliances — Safety — Part 2-87:

Particular requirements for electrical animal-stunning equipment

Kenya Standard — Low-voltage switchgear

and controlgear assemblies — Part 1: Type-

tested and partially type-tested assemblies


and controlgear assemblies — Part 2:

Particular requirements for busbar trunking

systems (busways)



Particular requirements for assemblies for

construction sites (ACS)



Particular requirements for assemblies for

powerdistribution in public networks

Kenya Standard — Degrees of protection

provided by enclosures (IP Code)

Kenya Standard — Boxes and enclosures

for electrical accessories for household andsimilar fixed electrical installations — Part

1: General requirements


for electrical accessories for household and

similar fixed electrical installations — Part

21: Particular requirements for boxes and

enclosures with provision for suspensionmeans



22: Particular requirements for connecting

boxes and enclosures



23: Particular requirements for floor boxes

and enclosures



24: Particular requirements for enclosures

for housing protective devices and similar

power consuming devices


and controlgear — Part 1: General rules


and controlgear— Part 2: Circuit-breakers


and controlgear — Part 3: Switches,

disconnectors, switch-disconnectors and

fuse-combination units


and controlgear — Part 5-5: Control circuitdevices and switching elements — Electrical

emergency stop device with mechanical

latching function


and controlgear — Part 5-8: Control circuitdevices and switching elements — Three-

position enabling switches


and controlgear — Part 5-9: Control circuit

devices and switching elements — Flow rate

switches


KS IEC 60947-6-1:2005

KS IEC 60947-6-2:2007

KS IEC 60947-8:2006

KS IEC 61032:1997

KS IEC 61558-1:2009

KS IEC 61558-2-1:2007

KS IEC 61558-2-2:2007

KS IEC 61558-2-7:2007

KS IEC 61558-2-23:2000 Kenya Standard —

KS IEC 61810-1:2008

KS IEC 61810-2:2005

KS IEC 61810-7:2006

KS IEC 61811-1:1999

KS IEC 61811-10:2002

KS IEC 61811-11:2002

KS IEC 61811-50:2002

KS IEC 61811-51:2002

KS IEC 61811-52:2002

Kenya Standard — Low-voltage switchgearand controlgear — Part 6-1: Multiple

function equipment — Transfer switching

equipment


and controlgear — Part 6-2: Multiple

function equipment — Control and

protective switching devices (or equipment)

(CPS)


and controlgear — Part 8: Control units forbuilt-in thermal protection (PTC) for

rotating electrical machines

Kenya Standard — Protection of persons

and equipment by enclosures — Probes for

verification

Kenya Standard — Safety of power

transformers, power supplies, reactors and

similar products — Part 1: Generalrequirements andtests



similar products — Part 2-1: Particular

requirements and tests for separating

transformers and power supplies

incorporating separating transformers for

general applications




requirements and tests for control

transformers and power supplies

incorporating control transformers




requirements and tests for transformers and

powersupplies for toys

Safety of powertransformers, power supply units and similar

devices — Part 2-23: Particular

requirements for transformers for

construction sites

Kenya Standard — Electromechanical

elementary relays — Part 1: General

requirements

Kenya Standard — Electromechanicalelementary relays — Part 2: Reliability


elementary relays — Part 7: Test and

measurement procedures

Kenya Standard — Electromechanical non-

specified time all-or-nothing relays of

assessed quality — Part 1: Generic

specification


elementary relays of assessed quality — Part

10: Sectional specification — Relays for

industrial application


elementary relays of assessed quality — Part11: Blank detail specification — Relays for

industrial application

Kenya Standard — Electromechanical all-

or-nothing relays — Part 50: Sectional

specification — Electromechanical all-or-

nothing telecom relays of assessed quality


or-nothing relays — Part 51: Blank detail



— Non-standardized types and construction



KS IEC 61811-53:2002

KS IEC 61811-54:2002

KS IEC 61811-55:2002

KS IEC 61869-1:2007

KS IEC 62208:2002

KS IEC 62262:2002

Confirmations



— Two change-over contacts, 20 mm x 10

mm base




nothing telecom relays of assessed quality— Two change-over contacts, 14 mm x 9

mm base

Kenya Standard — Electromechanical all-or-nothing relays — Part 54: Blank detail



— Two change-over contacts, 15 mm x 7,5

mm base




nothing telecom relays of assessed quality— Two change-over contacts, 11 mm x 7,5

mm (max.) base

Kenya Standard — Instrumenttransformers

— Part 1: General requirements

Kenya Standard — Empty enclosures for

low-voltage switchgear and controlgearassemblies — General requirements

Kenya Standard — Degrees of protection

provided by enclosures for electrical

equipment against external mechanical

impacts (IK code)

The following Kenya Standards are hereby confirmed:

KS 1406-2:1997

KS 1406-3:1997

KS 1408-1:1998

KS 1408-2:1998

KS 1407-1:1998

KS 1407-2:1998

KS 1410-1:1998

KS 1410-2:1998

KS 1410-3:1998

KS 1411-1:1998

KS 1411-2:1998

KS 381:1983

KS 807-3:1996

KS 1027-1: 2001

KS ISO 11036: 1994

KS 156:1980

KS 242:1980

KS 400:1983

Kenya Standard — Specification for

carbaryl dusting powders


carbaryl water dispersible powders


technical grade dimethoate


Dimethoate emulsifiable concentrate


chlorpyrifos - Part 1: Technical grade


chlorpyrifos emulsifiable concentrates


Malathion - Part 1: Technical grade


Malathion Emulsifiable Concentrates

Kenya Standard — Specification forMalathion Dusting Powder


Diazinon, Technical Grade

Kenya Standard — Specification forDiazinon Emulsifiable Concentrates

Kenya Standard — General methodsoftest

for pesticides and their formulations

Kenya Standard —

polishes - Part 3:

emulsion buffable type

Specification for auto-refinishing paints -

Part 1: Synthetic resin based

Kenya Standard — Sensory Analysis -

Methodology Texture Profile, First Edition

Kenya Standard —Specification for caustic

soda, pure and technical


sulphuric acid for use in lead-acidbatteries

Specification for

Floor polish water

Kenya Standard — Specification for acetic

acid


KS 1795:2003

KS 1455:1999

KS 92-1:2003

KS 1290-2:1998

KS 1290-3:1998

KS 1796:2003

KS ISO 6166: 2001

KS ISO 9019: 1995

KS ISO 10383 :2003

KS 1787:2003

KS 1788:2003

KS 1789:2003

KS 326-11:2003

KS 326-12:2003

KS 326-7:2003

KS 326-8:2003

KS 326-9:2003

KS 170:1979

KS 1302:1996

KS 684: 1988

KS 1089:1993

KS 1090:1993

KS 164:1979

KS 244-1:1979

KS 244-10:1981

KS 244-2:1981

KS 244-3:1981

KS 244-4:1981

Kenya Standard — Neem herbal soap —

Specification

Kenya Standard — Specification for glass

cleanerPart 1: Liquid glass cleaner

Kenya Standard — Synthetic detergent

powders - Specification - Part 1: Household

hand use


bleaching agents Part 2: Sodium

hypochlorite solution for water treatment


bleaching agents Part 3: Chlorinated lime

bleaching powderfor water treatment

Kenya Standard — Specification fordomestic chlorine basedsterilizing fluids

Kenya Standard — Securities and related

financial instruments — InternationalSecurities Identification Numbering System

(ISIN)

Kenya Standard — Securities — Numbering

of certificates

Kenya Standard — Securities and related

financial instruments - Codes for exchangesand MarketIdentification (MIC)

Kenya Standard — Specification for edible

cottonseed oil

Kenya Standard — Specification for ediblesoyabeanoil

Kenya Standard — Specification for olive

oil, virgin and refined, and for refined olive-

pomaceoil

Kenya Standard — Edible fats and oils -

Specification - Part 11: Palm olein

Kenya Standard — Edible fats and oils -Specification - Part 12: Palm stearin

Kenya Standard — Edible fats and oils -

Specification - Part 7: Palm oil


fats and oils - Part 8: Edible tallow (Second

Rivision)

Kenya Standard — Specification for ediblefats and oils - Part 9: Lard (Second Rivision)

Kenya Standard — Methods of sampling

milled cereal products

Kenya Standard — Specification for bread

crumbs

Kenya Standard — Specification for bakers

yeast

Kenya Standard — Specification for special

dietary foods with low sodium content

Kenya Standard — Specification for Gluten

free foods

Kenya Standard — Methods of sampling

and chemical analysis of infants and

children foods

Kenya Standard — Methods of analysis of

food for vitamins - Part 1: Estimation of

vitamin A and carotenes


food for vitamins - Part 10: Methods for

estimation of nicotinic acid (Niacin) in

foodstuffs


food for vitamins - Part 2: Estimation ofthiamine (vitamin B1)


foods for vitamins - Part 3: Estimation ofriboflavin (Vitamin B2)


foods for vitamins - Part 4: Estimation ofpyridoxine (vitamin B6)

KS 244-5:1981

KS 244-6:1981

KS 244-7:1981

KS 244-8:1981

KS 244-9:1981

KS 1446-1:1999

KS 220: Part 7: 1981

KS 1517:1999

KS 144:1979

KS 145:1983

KS 63-3:1992

KS 1651:2000

KS 1741:2001

KS 1172:1994

KS 837-1:1990

KS 837-2:1990

KS 165:1978

KS 166:2000

KS 1059-1:2001

KS 1503-1:1999

KS 1503-2:1999

KS 1505-1:2000

KS 1505-2:2000

KS 1505-3:1999

Kenya Standard — Methods of analysis offoods for vitamins - Part 5: Estimation of

vitamin B12


vitamin C


vitamin D


vitamin E (Tocopherols)


folic acid

Kenya Standard — Specification for health

drinks Part 1: Vitamin C-based health drinks

Kenya Standard — Methods for

microbiological examination of foods Part 7.

Method of examination for clostridium

botulinum andclostridium botulinum toxin.


ices and ice mixes.

Kenya Standard — Code ofpractice for pig

housing

Kenya Standard — Code of practice forpoultry housing

Kenya Standard — Methods of test for

animal feedstuffs - Part 3: Bacteriological

tests

Kenya Standard — Glossary of terms for

animal feedstuffs

Kenya Standard — Method of test for T2toxin in animal feedstuffs

Kenya Standard — Specification for grading

chicken eggs

Kenya Standard — Definitions of living

animals for slaughter - Part 1: Bovines

Kenya Standard — Definition of living

animals for slaughter - Part 2: Ovine

Kenya Standard — Methods for sampling

meat and meat products

Kenya Standard — Methods for the

chemical analysis of meat and meat products(Third Edition)

Kenya Standard — Specification for general

requirements for apparatus for connection to

the public switched telephone networks —

Part 1: General requirements


relating to electromagnetic interference

(EMI) and electromagnetic compatibility(EMC) — Part 1: Fundamental terms in

relation to electromagnetism


relating to electromagnetic interference

(EMI) and electromagnetic compatibility(EMC) — Part 2: Electromagnetic

compatibility terms


interference characteristics of overhead

powerlines and high-voltage equipment —Part 1: Description of the phenomenon



powerlines and high-voltage equipment —

Part 2: Methods of measurement andprocedure for determininglimits



powerlines and high voltage equipment —


KS 1589:2000

Withdrawals

Part 3: Code of practice for minimizing the

generation of radio noise

Kenya Standard — Specification for safety

practices in the operation and maintenanceof radio transmitters and similar equipment

The following Kenya Standards are hereby withdrawn forthwith:

KS67

KS 128

KS 69

KS 359

KS 171-1:2003

KS 171-2:2003

KS 171-3:2003

KS 43 - 1:1997

KS ISO 2171:1980

KS 1647:2001

KS 63-1:2000

KS 63-2:1983

KS 1094-1: 2007

KS 1094 -2: 2007

KS 1774: 2007

KS 433: 2007

KS 2063:2010

Kenya Standard, method for determination

of colour fastness of textile materials by useof geometric grey scale replaced BY iso 105

a02.

Kenya Standard, grey scale for evaluatingstaining, replaced BY iso 105 a03.

Kenya Standard, Method For Determination

Ofcolour Fastness Of Textile Materials ToDaylight Replaced BY Iso 105 BO1.

Kenya Standard, Method for determination

ofcolour fastness of textile materials toartificial light (xenon arc), replaced BY iso

105 b02.

Kenya Standard — Milled cereal products -

Methods of test - Part 1: Moisture

determination


Methods of test - Part 2: Total ash

determination


Methods of test - Part 3: Determination of

protein in animal feedstuffs, cereal and

cereal products, meat and meat products

using Kjeltec auto analyzer

Kenya Standard — Method of test:

Determination of moisture (Basic reference

method)

Kenya Standard — Cereals, pulses and by

products: Determinationoftotal ash

Kenya Standard — Code of practice for

animal feed production, processing, storage

and distribution

Kenya Standard — Method of test for

animal feedstuffs

Kenya Standard — Method of test for

animal feedstuffs

Kenya Standard — Crisp - Specification -

Part 1: Potato crisps

Kenya Standard — Crisp - Specification -

Part 2: Cassavacrisps.

Kenya Standard —

Specification

Cassava flour —

Kenya Standard — Edible cassava starch —Specification

Kenya Standard —

Specification

Cassava Chips-

Following the adoption of the KS ISO 1452 Parts 1, 2, 3, 4, & 5

series of standards and ISO FDIS 22391-Parts 1, 2, 3 & 5 series in the

March SAC meeting, it was resolved that all the following Kenya

standards be withdrawn:

KS 149-1:2000

KS 149-2:2000

KS 292-1:1994

Kenya Standard — Specification for pipes

and fittings made of unplasticized polyvinyl

chloride (U-PVC) for water supply Part 1.

General requirements

Kenya Standard — Specification for pipes

and fittings made of unplasticized polyvinyl

chloride (U-PVC) for water supply Part 2.Dimensions, nominal outside diameters wall

thicknesses and nominal pressures (metric

series)

Kenya Standard — Specification for joints

and fittings for use with unplasticized pvc

pressure pipes Part 1: Injection moulded

unplasticized pvc fittings for solvent

KS 292-2:1994

KS 292-3:1994

KS 217:1981

KS 1230-1:1994

KS 1230-2:1994

KS 1230-3:1994

KS 1230-4:1994

KS 1230-5:1994

KS 1230-6:1994

KS 1230-7:1994

KS 1586-1:1999

KS 1586-2:1999

KS 1588-1:2001

KS 1591:1999

KS 234:1987

KS 235:1983

KS IEC CISPR 11:1999



welding for use with pressure pipes,including potable water supply

Kenya Standard — Specification for joints

and fittings for use with unplasticized pvc

pressure pipes Part 2: Fabricated

unplasticized pvc fittings and mechanical

joints made principally from unplasticized

pipes

Kenya Standard — Specification for jointsand fittings for use with unplasticized PVC

pipes Part 3. Specification for solvent

cement


unplasticized pvc pipes and fittings for

buried drain and sewer

Kenya Standard — Specification for low-

frequency cables and wires with PVC

insulation and PVC sheath — Part 1:

General requirements and measuringmethods



insulation and PVC sheath— Part 2: Cables



insulation and PVC sheaths — Part 3:

Equipment wires




Distribution wires




Equipment wires and cables, screened


frequency cables and wires with PVC sheath

— Part 6: Signalling cables

Kenya Standard — Specification for Low-

Frequency cables and wires with PVC


Distribution wires, polyamide coated


interference measuring apparatus and

measurement methods — Part 1: Radio


apparatus


immunity measuring apparatus and methods

— Part 2: Methods of measurement of

disturbances and immunity


telecommunications installations — Part 1:

Integrated telecommunications cabling

systems for commercial premises

Kenya Standard — Safety requirements for

audio, video and Electronic apparatus(Second Edition)

Kenya Standard — Receivers for television

broadcast — Specification

Kenya Standard — Specification forreceivers for radio broadcast

Kenya Standard — Standard for

electromagnetic disturbance characteristics

of industrial, scientific and medical (SM)

radiofrequency equipment —Limits and

methods of measurement

Kenya Standard — Vehicles, motorboats,

and spark -ignited engine-driven devices —

Radio disturbance characteristics — Limits

and methods of measurement


measurement of radio interference


KS IEC CISPR 14-1:

1999

KS IEC CISPR 14-2:

1999

KS 1504:2000




KS 1108-1:1995 Kenya

KS 1108-2:1995 Kenya

KS 181:1980

KS 182-1:1982

KS 183-1:1978

(Confirmed, 1999)

KS 183-2: 1981

(Confirmed, 1999)

KS 183-3:1981

(Confirmed, 1999)

KS 183-4:1983

(Confirmed, 1999)

characteristics of sound and television

broadcast receivers and associated

equipment

Kenya Standard — Specifications for limits

and methods of measurement of radio

disturbance characteristics of electrical

motor operated and thermal appliances for

household and similar purposes, electric

tools and similar electric apparatus

Kenya Standard — Electromagneticcompatibility — Requirements for

household appliances, electric tools andsimilar apparatus — Part 2: Immunity —

Product family standard

Kenya Standard — Specification for limits

and methods of measurement of radio

disturbance characteristics of electricallighting and similar equipment

Kenya Standard — Standard Specification

for electromagnetic immunity requirements

of sound and television broadcast receivers

and associated equipment

Kenya Standard — Specification for radiodisturbance characteristics of information

technology equipment — Limits and

methods of measurement


measurement of radio disturbance

characteristics for the protection of receivers

used on board vehicles

Standard — Specification for isolating

transformers and safety isolating

transformers — Part 1: General

requirements

Standard — Specification for isolating

transformers and safety isolatingtransformers — Part 2: Supplementary

requirements for isolating transformers


voltage circuit breakers


contactors — Part 1: Contactors for voltagesupto and including 1 000 volts A.C and 1

200 volts D.C


voltage fuses — Part 1: General

requirements

Kenya Standard — Specification for low —voltage fuses — Part 2: Supplementary

requirements for fuses for industrial

applications


voltage fuses — Part 3: Supplementary

requirements for fuses for domestic and

similar application

Kenya Standard — Specification for low-voltage fuses — Part 4: Supplementary

requirements for fuse-links for the

protection of semiconductor devices

KS 305:1984

(Confirmed, 1999)

KS 645-1:1987

KS 645-2:1987

KS 645-3:1987

KS 645-4:1987

KS 645-5:1987

KS 646-1:1987

KS 646-2:1987

KS 668:1986

(Confirmed 2003)

KS 1431:1997

KS 743:1989

KS 935:1990

KS 1501:1999

KS 1502-1:1999

KS 1502-3:1999

KS 1502-2.1:1999

KS 1502-4:1999

KS 1502-5:2000

KS 247:1999

KS 890:2000

KS 890:2000

KS 1453:2000

Kenya Standard — Specification for generalpurposes fuse links for domestic and similarpurposes(primarily for use in 13 A plugs)

Kenya Standard — Specification for powertransformers — Part 1: General

Kenya Standard — Specification for powertransformers — Part 2: Specification fortemperature rise requirements

Kenya Standard — Specification for powertransformers — Part 3: Insulation levels and

dielectric tests

Kenya Standard — Specification for power

transformers — Part 4: Specification fortapping and connections

Kenya Standard — Specification for powertransformers — Part 5: Ability to withstand

short circuit

Kenya Standard — Specification for electricfence controllers — Part 1: Mains operated

Kenya Standard — Specification for battery-operated electric fence controllers notsuitable for connection to the supply mains

Kenya Standard — Specification for boxesfor enclosuresofelectrical accessories

Kenya Standard — Specification forjunction boxes for use in electricalinstallations

Kenya Standard — Specification for batterychargers

Kenya Standard — Methodof determinationof transformers and reactors sound levels

Kenya Standard — Glossary of termsrelating to electrical relays

Kenya Standard — Specification forelectromechanical all-or-nothing relays —Part 1: General requirements andtests

Kenya Standard — Electromechanical all-or-nothing relays — Part 3 Insulating tests

Kenya Standard — Electromechanical all-or-nothing relays — Part 2, Section 1: Test

and measurement procedures

Kenya Standard — Electromechanical all-or-nothing relays — Part 4: Application of

quality assessment system for electroniccomponents to all-or-nothing relays

Kenya Standard — Kenya standardspecification for electromechanical all-or-

nothing relays — Part 5: Dimensions for

general purpose all-or-nothing relays

Kenya Standard — Specification forswitches for domestic and similar purposes(Third Edition)

Kenya Standard — Classification of degreesof protection provided by enclosures(Second Edition)

Kenya Standard — Classification of degreesof protection provided by enclosures(Second Edition)

Kenya Standard — Test probes to verify

protection by enclosure

Dated the 14th July, 2010.

JOEL KIOKO,Secretary,

National Standards Council.

PRINTED AND PUBLISHED BY THE GOVERNMENTPRINTER, NAIROBI

publishedbyauthorityoftherepublicofkenya · 8/13/2010 · kenya standard — codex standard for...

Documents