Punch! ProPlatinum Home Design

Adding a Roof

Change the View

First lets change the view of your plan so that your entire house is visible on the screen.

Change the view to 90%. Click OK.

Wall Segments

On the Floor Plan, select the 24’ left exterior wall. Notice that your Preview Bar changes to Walls.

Click on the Wall Style Button and select the second option. The Base height should be 8’0”. Change the Height C to 8’0”. Press ENTER on keyboard to set changes.

Pitch A and B should be the same number and match the pitch of the roof as well.

Do the same to the right exterior wall segment.

Type of Roof

Click on the Roofing Plan Tab, and then click on the first roof style, which is the Gable roof.

Roof Pitch

On the Preview Bar choose the pitch option 10:12 or the pitch that matches your wall segments.

Making the Roof

Click and drag from a corner point just outside of your exterior walls across to the opposite corner.

The arrows that appear in the middle of your roof drawing show which direction the roof will slope.

Your floor plan should look like this.