pv-1 personal vortex mixer - keison products · 2016. 6. 21. · 13.6 pv-1 personal vortex mixer...

2
PV-1 personal vortex mixer Extremely compact personal vortex mixer with a low profile and small footprint for gentle mixing to vigorous re-suspension of cell or chemical pellets in 0.5 ml, 1.5 ml and 15 ml tubes. Adjustable speed control: 250 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Exceptionally compact with a low profile and small footprint – fits into almost any location Pressure sensitive cup accommodates tubes up to 20 mm diameter Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 250 rpm to 3000 rpm Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench

Upload: others

Post on 29-Jan-2021

1 views

Category:

Documents


0 download

TRANSCRIPT

  • 13.6

    PV-1 personal vortex mixer

    Extremely compact personal vortex mixer with a low profile and small footprint for gentlemixing to vigorous re-suspension of cell or chemical pellets in 0.5 ml, 1.5 ml and 15 ml tubes.

    Shakers, mixers and stirrers » PV-1 vortex mixer

    © Grant Instruments (Cambridge) Ltd

    n Adjustable speed control: 250 to 3000 rpm

    n ‘Continuous’ or ‘touch’ operation

    n For tubes up to 20 mm diameter

    Exceptionally compact with a lowprofile and small footprint – fits into almost any location

    Pressure sensitive cupaccommodates tubes up to 20 mm diameter

    Extremely easy to operate – select either ‘continuous’ or‘touch’ operation and turn theknob to adjust the speed from 250 rpm to 3000 rpm

    Reliable and extremely quiet motorproduces regulated andreproducible agitation throughoutthe speed range

    In ‘touch’ mode, agitation starts in response to pressure on thepressure sensitive cup

    Rubber suction pads hold tight tothe work surface and prevent theunit from ‘walking’ – they alsoabsorb vibration and prevent itstransmission to the workbench

  • Thank you for reading this data sheet.

    For pricing or for further information, please contact us at our UK Office, using the details below.

    UK OfficeKeison Products,

    P.O. Box 2124, Chelmsford, Essex, CM1 3UP, England.Tel: +44 (0)330 088 0560Fax: +44 (0)1245 808399

    Email: [email protected]

    Please note - Product designs and specifications are subject to change without notice. The user is responsible for determining the suitability of this product.

    mailto:[email protected]://www.keison.co.uk