qd volume 22 october 2006

Greenheck Quick DeliveryStock & Quick Build CatalogVolume 22

This catalog is being sent to you on behalf of:

Fan Select

ion

Applicatio

n-Based S

election

Performan

ce Theory

AB

C

13/4 in.

*

G CONDENSED PERFORMANCE &DIMENSIONAL DATA

UL/cUL 705 E40001 - G

MODEL A B C* ROOFOPENINGDAMPER

SIZEIN STOCK SIZES ()

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1

G-060 17 193/8 121/8 10 x 10

8 x 8

1050 1.7 138 731550 4.2 203 166 120

G-065 17 193/8 121/8 10 x 10 1050 2.2 187 1101550 4.9 276 232 176

G-070 17 193/8 121/8 10 x 10 1050 2.7 254 1791550 5.6 374 327 274

G-075 17 193/8 121/8 10 x 10 1050 3.6 296 2001550 6.1 438 377 310

G-080 17 21 145/8 12 x 12

10 x 10

1050 3.8 335 249 1341550 7.3 495 439 379 238

G-085 17 21 145/8 12 x 12 1050 4.0 399 307 1791550 7.6 588 529 464 308

G-090 17 21 145/8 12 x 12 1050 4.0 520 420 2921550 7.6 768 700 633 472

G-095 17 21 145/8 12 x 12 1050 5.4 717 569 3891550 9.6 1059 969 863 623

G-101 19 245/8 20 14 x 14 12 x 12

860 4.3 766 588 2391725 12.1 1536 1454 1374 1181 974

G-121 19 245/8 20 14 x 14 860 5.6 922 723 4491725 14.1 1849 1753 1659 1453 1223

G-131 22 287/8 20 18 x 18

16 x 16

860 6.5 1193 1011 7711725 19.2 2393 2310 2222 2030 1820 1555

G-141 22 287/8 20 18 x 18 860 6.8 1376 1160 9191140 10.4 1824 1667 1498 1112

G-150 26 35 211/8 18 x 18 860 7.9 1772 1552 13051140 11.7 2348 2184 2016 1629 1115

G-160 30 35 215/8 20 x 20

18 x 18

860 8.0 2008 1783 1535 5521140 13.6 2662 2489 2319 1932 1411

G-170 30 35 215/8 20 x 20 860 9.7 2572 2329 2077 14171140 16.3 3409 3226 3042 2647 2182 1458

G-180 30 35 22 20 x 20 860 12.1 3240 3002 2733 19781140 19.5 4295 4122 3933 3509 2971 2247

FansRoof Exhaust Direct Drive - GModel G Centrifugal Roof Exhaust fans are direct drive. These fans are specifically designed for roof mounted applications exhausting relatively clean air. Fan wheels are centrifugal, backward inclined, and constructed of aluminum.

PERFORMANCEPerformance capabilities range from 73 cfm to 4,295 cfm and up to 1 in. wg of static pressure.

For complete product information refer to catalog Model G and GB, or contact your local representative.

Greenheck Fan Corporation certifies that the G models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

Performance for available IN STOCK SIZES is shown on page 5

*May be greater depending on motor. All dimensions in inches.Dimension A - given is the inside dimensions of the curb cap. The roof curb should be 1 in. less than the curb cap to allow for roofing and flashing. Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

4 F A N S

F A N S

A

B

C*

13/4 in.

For complete product information refer to catalog Model G and GB, or contact your local representative.

Greenheck Fan Corporation certifies that the GB models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*May be greater depending on motor. All dimensions in inches. Dimension A - given is the inside dimensions of the curb cap.The roof curb should be 1 in. less than the curb cap to allow for roofing and flashing. Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

GB CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA Performance for available IN STOCK SIZES is shown on pages 8 & 9

UL/cUL 705E40001 - GB

MODEL A B C* ROOFOPENINGDAMPER

SIZEIN STOCK SIZES ()

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .25 .5 .75 1 1.25 1.5 1.75 2.0

GB-071 19 243/8 23 14 x 14

12 x 12

600 1.2 131 681710 11.1 372 334 292 245 198

GB-081 19 243/8 23 14 x 14 600 2.2 301 1751710 12.5 856 784 710 629 480

GB-091 19 243/8 23 14 x 14 600 2.7 455 2711710 13.4 1295 1179 1061 934 785

GB-101 19 243/8 23 14 x 14 700 3.7 593 4551800 13.2 1525 1418 1320 1208 1064 793

GB-121 19 243/8 23 14 x 14 595 3.3 7211725 17.4 2093 1984 1871 1743 1600 1426

GB-131 19 283/8 23 14 x 14 595 4.5 844 6551685 16.9 2391 2278 2157 2020 1857 1654

GB-141 22 283/8 23 18 x 18 16 x 16

525 4.4 974 7091705 20 3163 3020 2883 2739 2574 2370

GB-161 22 283/8 23 18 x 18 478 4.7 1412 10301375 21 4062 3815 3571 3304 3007 2609 2073

GB-180 30 35 28 20 x 20 18 x 18

495 4.3 1924 11501460 26 5677 5514 5335 5155 4938 4698 4426 4123 3765

GB-200 30 35 28 20 x 20 440 6.5 24341200 24 6640 6336 5968 5650 5274 4828 4177 3077

GB-220 34 42 31 26 x 26 24 x 24

330 6.6 2507985 23 7484 7212 6898 6568 6106 5547 4883

GB-240 34 42 31 26 x 26 425 5.9 3902 3422 2691910 24 8355 7916 7467 6932 6240 5388 3707

GB-260 40 50 36 32 x 32 30 x 30

270 7.7 3487835 23 10784 10292 9794 9225 8606 7932 7157 6024 4294

GB-300 40 50 36 32 x 32 300 9.3 4859 3976890 28 14416 13897 13335 12716 12072 11379 10536 9568 7963

GB-330 46 58 38 38 x 38 36 x 36

255 5.2 6159700 28 16908 16185 15408 14564 13624 12640 11538 10184

GB-360 46 58 38 38 x 38 215 4.8 5750685 30 18321 17560 16711 15773 14710 13534 12119

GB-420 52 65 44 44 x 44 42 x 42 180 2.5 7417600 30 24724 23765 22709 21620 20103 18584 16590

GB-480 58 73 47 50 x 50 48 x 48 150 5.6 9015485 31 29148 27622 26016 24290 22106 19516

GB-500 64 83 50 56 x 56 54 x 54

160 5.9 12893460 33 37068 34991 32805 30342 27917 25310

GB-540 64 83 50 56 x 56 160 6.3 14160505 40 44694 43221 41157 38813 36503 33869 31293 26758

Roof Exhaust Belt Drive - GBModel GB Centrifugal Roof Exhaust fans are belt drive. These fans are specifically designed for roof mounted applications exhausting relatively clean air. Fan wheels are centrifugal, backward inclined, and constructed of aluminum. Adjustable motor pulleys allow for final system balancing.

PERFORMANCEPerformance capabilities range from 140 cfm to 44,690 cfm and up to 2.0 in. wg of static pressure.

6

F A N S

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

MODEL HP RPM TS SONES @ 0 IN.MAX BHP

PERFORMANCE IN INCHES WG

0 .125 .25 .375 .5 .625 .75 1

GB-071-4X-QD-R2873-1256 RPM

1/4 HP, 115/60/1 ODP

GB-071-4X-QD-R31221-1710 RPM

1/4 HP, 115/60/1 ODP

600 1757 1.2 0.006 131 68

939 2750 3.4 0.021 205 169 127

1247 3652 6.5 0.05 272 246 217 185 154 109

1556 4558 9.3 0.098 339 319 296 274 248 223 197 120

1710 5009 11.1 0.13 373 353 335 312 292 269 246 198

GB-081-4X-QD-R2873-1256 RPM

1/4 HP, 115/60/1 ODP

GB-081-4X-QD-R31221-1710 RPM

1/4 HP, 115/60/1 ODP

600 1757 2.2 0.008 301 175

939 2750 4.7 0.031 470 404 330

1247 3652 7.6 0.073 625 575 525 470 403 284

1556 4558 10.8 0.14 779 740 700 660 615 571 517

1710 5009 12.5 0.19 856 821 785 748 710 669 630 511

GB-091-4X-QD-R2863-1256 RPM

1/4 HP, 115/60/1 ODP

GB-091-4X-QD-R31221-1710 RPM

1/4 HP, 115/60/1 ODP

600 1757 2.7 0.011 455 271

939 2750 5.7 0.042 711 606 490 263

1247 3652 9.2 0.098 945 866 785 698 604 454

1556 4558 11.8 0.19 1179 1116 1052 988 919 848 772 504

1710 5009 13.4 0.25 1296 1238 1180 1122 1062 999 934 785

GB-101-4X-QD-R31056-1400 RPM

1/4 HP, 115/60/1 ODP

GB-101-4X-QD-R41324-1688 RPM

1/4 HP, 115/60/1 ODP

GB-101-LMDX-QD588-1800 RPM

700 2039 3.7 0.020 593 455

1165 3393 6.8 0.091 987 905 830 731 578

1400 4077 8.9 0.16 1186 1117 1051 989 909 810 633

1635 4761 11.1 0.25 1385 1325 1269 1214 1161 1094 1019 792

1/3 1800 5242 13.2 0.33 1525 1471 1418 1367 1320 1270 1208 1064

GB-121-4X-QD980-1395 RPM

1/4 HP, 115/60/1 ODP


595 2035 3.3 0.021 722 542

820 2804 5.2 0.054 995 877 728

1045 3574 7.3 0.111 1268 1177 1078 962 805

1395 4770 12.5 0.25 1692 1625 1557 1484 1404 1315 1214 907

1/3 1550 5300 14.6 0.33 1880 1820 1759 1696 1629 1555 1475 1289

1725 5899 17.4 0.50 2093 2038 1984 1928 1871 1810 1743 1600

GB-131-4X-QD942-1315 RPM

1/4 HP, 115/60/1 ODP

GB-131-5X-QD1299-1685 RPM

1/2 HP, 115/208-230/60/1

ODP


595 2044 4.5 0.024 844 655

720 2474 5.4 0.043 1022 879 650

960 3299 7.6 0.103 1362 1262 1144 990

1315 4518 13.2 0.26 1866 1794 1718 1637 1545 1435 1305

1/3 1440 4948 15.0 0.35 2044 1978 1911 1838 1759 1674 1571 1299

1685 5790 16.9 0.56 2391 2335 2279 2219 2158 2093 2020 1857

GB-141-4X-QD614-865 RPM

1/4 HP, 115/60/1 ODP

GB-141-3X-QD906-1170 RPM

1/3 HP, 115/60/1 ODP

GB-141-5X-QD1049-1360 RPM

1/2 HP115/208-230/60/1

ODP


525 2010 4.4 0.030 974 709

710 2718 5.7 0.074 1317 1147 908

920 3522 7.7 0.16 1706 1576 1439 1258 961

1075 4115 10.0 0.26 1994 1881 1771 1646 1489 1265

1/3 1170 4479 11.4 0.34 2170 2066 1966 1858 1733 1574 1355

1360 5207 14.6 0.53 2522 2433 2346 2258 2166 2062 1942 1602

1545 5915 17.6 0.78 2866 2787 2709 2634 2556 2475 2384 2176

1 1705 6528 20 1.03 3163 3091 3020 2952 2883 2811 2739 2574

GB Performance Data - In StockStock Model GB fans include galvanized birdscreen, disconnect switch, UL/cUL 705 Electrical.

Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d

8

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

MODEL HP RPM TS SONES @ 0 IN.MAX BHP


0 .125 .25 .375 .5 .625 .75 1 1.5 2

GB-161-4X-QD634-865 RPM

1/4 HP115/60/1 ODP

GB-161-5X-QD852-1100 RPM

1/2 HP115/208-230/60/1 ODP


478 2080 4.7 0.044 1412 1030

625 2720 6.4 0.097 1846 1574 1221

865 3764 10.6 0.26 2555 2359 2162 1932 1624

1/3 945 4113 12.6 0.34 2791 2612 2433 2236 2009 1692

1100 4787 15.3 0.53 3249 3094 2943 2786 2614 2428 2197

1250 5440 17.9 0.79 3692 3556 3421 3288 3149 2997 2838 2443

1 1375 5984 21 1.05 4062 3938 3815 3694 3571 3444 3304 3007 2073

GB-180-5X-QD676-940 RPM

1/2 HP115/208-230/60/1 ODP


495 2397 4.3 0.078 1924 1645 1150

730 3535 7.4 0.26 2838 2667 2469 2212 1882

1/3 810 3923 8.8 0.35 3149 2997 2832 2623 2375 2052

940 4552 12.7 0.55 3655 3526 3387 3234 3052 2843 2600

1055 5109 16.2 0.77 4102 3989 3866 3741 3596 3432 3251 2811

1 1185 5739 19.0 1.1 4607 4507 4400 4290 4179 4045 3900 3575

1 1335 6465 22 1.54 5191 5102 5010 4912 4814 4715 4599 4343

2 1460 7071 26 1.97 5677 5595 5514 5424 5335 5245 5155 4938 4426 3765


440 2462 6.5 0.103 2434 1975

600 3357 8.5 0.26 3320 2984 2637 2088

1/3 665 3721 9.6 0.35 3679 3378 3084 2705 2087

770 4308 12.1 0.55 4260 4013 3744 3477 3140 2643

860 4812 14.1 0.77 4759 4548 4289 4068 3810 3504 3085

1 965 5400 16.7 1.09 5340 5157 4927 4719 4519 4285 4015 3239

1 1090 6099 20 1.57 6031 5870 5681 5473 5301 5123 4924 4449

2 1200 6715 24 2.09 6640 6493 6336 6144 5968 5812 5650 5274 4177


425 2726 5.9 0.21 3902 3422 2691

460 2950 6.7 0.26 4223 3784 3188 2036

1/3 505 3239 7.8 0.35 4636 4241 3760 3059

585 3752 10.3 0.55 5371 5030 4665 4194 3562 2112

660 4233 13.1 0.79 6059 5756 5449 5093 4636 4073 3217

1 730 4682 15.8 1.06 6702 6427 6157 5861 5506 5076 4567

1 825 5291 19.7 1.54 7574 7331 7091 6844 6573 6261 5901 5002

2 910 5836 24 2.06 8355 8134 7916 7699 7467 7214 6932 6240 3707


1/3300 2395 9.3 0.19 4859 3976

365 2914 9.2 0.35 5912 5222 4339

420 3353 9.6 0.53 6803 6221 5536 4640

475 3792 11.4 0.77 7694 7197 6615 5954 5094

1 530 4231 13.4 1.07 8584 8149 7639 7094 6455 5667 4194

1 600 4790 15.9 1.55 9718 9334 8906 8445 7951 7387 6721

2 665 5309 18.8 2.12 10771 10424 10059 9648 9228 8772 8268 7025

3 760 6068 23 3.15 12310 12007 11703 11357 10996 10629 10241 9369

5 890 7106 28 5.05 14416 14157 13897 13638 13335 13027 12716 12072 10536 7963


GB Performance Data - In StockStock Model GB fans include galvanized birdscreen, disconnect switch, UL/cUL 705 Electrical.

9F A N S

H-GPF or SDCurb

BA1.75 in.

A

C

D

A

B

A

D

1.75 in.

B

13F A N S

All dimensions in inches. Dimension A - given is the inside dimensions of the curb cap. The roof curb should be 11/2 in. less than the curb cap to allow for roofing and flashing. Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of a birdscreen. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

LBP BELT DRIVE CONDENSEDPERFORMANCE RANGES & DIMENSIONAL DATA

1.75 in.

E

A

C

D

A

B

MODEL LB

AC

B

A

D

1.75 in.

MODEL LBP

MODEL A B C D E ROOF OPENINGDAMPER

SIZEMIN/MAX

RPMSONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1

LB-10 22 x 22 28 39 17 3 14 x 14 12 x 12 600 3.0 539 3511767 13.5 1587 1533 1480 1385 1254 1112

LB-14 26 x 26 35 39 18 4 18 x 18 16 x 16 480 4.1 903 6141343 14.4 2525 2456 2372 2199 1979 1692

LB-18 30 x 30 40 39 21 4 20 x 20 18 x 18

465 2.7 1753 14221460 24 5505 5417 5328 5138 4936 4714

LB-21 30 x 30 43 51 23 6 20 x 20 465 6.6 2820 2420 17321165 25 7066 6940 6815 6474 6124 5678

LB-24 34 x 34 45 51 23 6 26 x 26 24 x 24 355 5.8 3419 2806910 27 8763 8549 8333 7889 7377 6713

LB-30 40 x 40 50 62 265/8 8 32 x 32 30 x 30 230 8.0 3910 2576835 27 14194 13914 13635 13062 12432 11728

LB-36 46 x 46 60 62 325/8 9 38 x 38 36 x 36 220 5.2 6204 4803678 25 19121 18770 18419 17621 16683 15636

LB-42 52 x 52 705/8 74 373/8 11 44 x 44 42 x 42 190 6.1 8328 6455515 24 22574 22037 21500 20214 18651 16871

LB-48 58 x 58 703/8 67 41 115/8 50 x 50 48 x 48 150 5.4 9666 6546420 23 27065 26278 25383 23363 21159 18029

LB-54 64 x 64 79 86 453/8 12 56 x 56 54 x 54 130 4.6 12159401 29 37506 36544 35583 33500 30332 26018

MODEL A B C D ROOF OPENINGDAMPER

SIZEMIN/MAX

RPMSONES @

0 in.PERFORMANCE IN INCHES WG

0 .125 .25 .5 .75 1

LBP-10 22 x 325/8 39 28 15 14 x 14 12 x 12 600 3.0 539 3511767 13.5 1587 1533 1480 1385 1254 1112

LBP-14 26 x 26 40 32 15 18 x 18 16 x 16 480 4.1 903 6141343 14.4 2525 2456 2372 2199 1979 1692

LBP-18 30 x 30 46 353/8 24 20 x 20 18 x 18

465 2.7 1753 14221460 24 5505 5417 5328 5138 4936 4714

LBP-21 30 x 30 46 36 24 20 x 20 465 6.6 2820 2420 17321165 25 7066 6940 6815 6474 6124 5678

LBP-24 34 x 34 49 40 23 26 x 26 24 x 24 355 5.8 3419 2806910 27 8763 8549 8333 7889 7377 6713

LBP-30 40 x 40 58 46 26 32 x 32 30 x 30 230 8.0 3910 2576835 27 14194 13914 13635 13062 12432 11728

LBP-36 46 x 46 63 513/4 343/8 38 x 38 36 x 36 220 5.2 6204 4803678 25 19121 18770 18419 17621 16683 15636

LBP-42 52 x 52 70 58 38 44 x 44 42 x 42 190 6.1 8328 6455515 24 22574 22037 21500 20214 18651 16871

LBP-48 58 x 58 76 64 403/8 50 x 50 48 x 48 150 5.4 9666 6546420 23 27065 26278 25383 23363 21159 18029

LBP-54 64 x 64 83 70 435/8 56 x 56 54 x 54 130 4.6 12159401 29 37506 36544 35583 33500 30332 26018

Low Silhouette Roof Exhaust - LB/LBP

STANDARD CONSTRUCTION FEATURES Aluminum housing with hinged hood Non-overloading backward inclined aluminum wheel Curb cap with prepunched mounting holes Motor and drives isolated on shock mounts Birdscreen mounted to the discharge perimeter Ball bearing motors Adjustable motor pulley Adjustable motor plate Fan shaft mounted in ball bearing pillow blocks Static free belts Corrosion resistant fasteners Nema-1 disconnect

OPTIONS AND ACCESSORIES Galvanized housing Performance baffle (Direct drive models) Gravity and motorized dampers Galvanized and aluminum roof curbs

(See pages 114-115) Curb seal Curb adaptors Aluminum birdscreen Speed control (Direct drive models) Relubricatable bearings UL/cUL 705 Electrical Dual Drives NEMA 3R and EXP disconnect switches Greenheck coatings (See coatings page 117)

LB BELT DRIVE CONDENSEDPERFORMANCE RANGES & DIMENSIONAL DATA

14 F A N S

B

C*

A

13/4

"D

in.

Greenheck Fan Corporation certifies that the CUE models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*May be greater depending on motor. All dimensions in inches.^Dampers should not be used in grease applications.Dimension A - given is the inside dimensions of the curb cap.The roof curb should be 11/2 in. less than the curb cap to allow for roofing and flashing.Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

Performance for available IN STOCK SIZES is shown on page 15

UL/cUL 705UL/cUL 762 (size 98 and up)E40001 - CUE

MODEL A B C* D ROOF OPENINGDAMPER

SIZE ^IN STOCK SIZES ()

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1.5

CUE-060 17 183/8 13 113/8 10 x 10

8 x 8

1050 1.7 133 811550 4.2 197 164 128

CUE-065 17 183/8 13 113/8 10 x 10 1050 2.2 180 1091550 4.7 266 222 172

CUE-070 17 183/8 13 113/8 10 x 10 1050 2.6 250 1711550 5.5 369 325 269

CUE-075 17 183/8 13 113/8 10 x 10 1050 3.4 287 1881550 6.0 424 359 291

CUE-080 19 21 133/8 11 12 x 12

10 x 10

1050 3.8 325 247 1331550 7.3 480 431 376 235

CUE-085 19 21 133/8 11 12 x 12 1050 4.0 389 305 1821550 7.5 574 520 461 312

CUE-090 19 21 133/8 11 12 x 12 1050 4.1 549 451 3061550 7.8 811 744 677 501

CUE-095 19 21 15 137/16 12 x 12 1050 5.3 711 570 3811550 9.6 1049 964 861 616

CUE-098 19 247/8 28 173/8 14 x 14

12 x 12

860 8.4 588 4091725 13.8 1180 1094 1017 824 586

CUE-101 19 247/8 28 173/8 14 x 14 860 4.6 732 625 4811725 13.3 1468 1422 1373 1255 1129

CUE-121 19 247/8 28 173/8 14 x 14 860 5.3 1015 905 7811725 15.6 2037 1979 1923 1816 1710 1176

CUE-131 19 247/8 28 173/8 14 x 14 860 8.5 1180 1057 9141725 18.8 2366 2305 2244 2122 1994

CUE-141 22 287/8 29 193/8 18 x 18 16 x 16

860 7.3 1558 1427 12641725 26 3125 3066 3005 2865 2711 2085

CUE-161 22 287/8 29 193/8 18 x 18 860 10.7 2472 2315 2126 16801140 15.7 3277 3161 3035 2745 2421

CUE-180 30 233/8 285/8 21 20 x 20 18 x 18

860 12.3 3249 3074 2922 24741140 17.6 4307 4173 4045 3822 3470

CUE-200 30 233/8 285/8 21 20 x 20 860 15.7 4837 4587 4346 3815 30841140 24 6412 6224 6036 5674 5283 3445

Upblast Roof Exhaust Direct Drive - CUE/CUE-HPModel CUE Centrifugal Roof Exhaust fans are direct drive. These fans are specifically designed for roof mounted applications. Exhaust air is discharged directly upward, away from the roof surface. Fan wheels are centrifugal, backward inclined and constructed of aluminum.

PERFORMANCEPerformance capabilities range from 130 cfm to 6,410 cfm and up to 1.5 in. wg of static pressure.

CUE CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA

For complete product information refer to catalog Series C, or contact your local representative.

16 F A N S

For complete product information refer to catalog Series C, or contact your local representative.

B

C*D

A

13/4 in.

Greenheck Fan Corporation certifies that the CUBE models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*May be greater depending on motor. All dimensions in inches.^Dampers should not be used in grease applications.Dimension A - given is the inside dimensions of the curb cap.The roof curb should be 11/2 in. less than the curb cap to allow for roofing and flashing.Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

CUBE CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA Performance for available IN STOCK SIZES is shown on pages 18 & 19

UL/cUL 705UL/cUL 762MH 11745-CUBE

MODEL A B C* D ROOF OPENINGDAMPER

SIZE^IN STOCK SIZES ()

MIN/MAX RPM

SONES @ 0 IN.

PERFORMANCE IN INCHES WG0 .25 .5 .75 1 2

CUBE-098 19 247/8 28 173/8 14 x 14

12 x 12

650 8.1 4451725 13.8 1180 1017 824 586

CUBE-101 19 247/8 28 173/8 14 x 14 860 4.6 732 625 4811820 14.3 1549 1459 1350 1234 1106

CUBE-121 19 247/8 28 173/8 14 x 14 685 4.4 8091725 15.6 2037 1923 1816 1710 1571

CUBE-131 19 247/8 28 173/8 14 x 14 650 6.2 8921645 17.9 2256 2128 2001 1864 1684

CUBE-141 22 29 24 193/8 18 x 18 16 x 16

590 5.0 10691725 26 3125 3005 2865 2711 2539

CUBE-161 22 29 24 193/8 18 x 18 730 8.1 2098 16691390 22 3996 3806 3584 3340 3078

CUBE-180 30 353/8 285/8 21 20 x 20 18 x 18

630 7.1 2380 18611495 28 5648 5443 5254 5082 4921 3564

CUBE-200 30 353/8 285/8 21 20 x 20 500 6.2 2812 18221210 25 6806 6451 6108 5748 5350

CUBE-220 34 4225/32 337/8 25 26 x 26 24 x 24

450 7.3 3585 2624955 25 7607 7202 6799 6347 5844

CUBE-240 34 4225/32 337/8 25 26 x 26 410 6.4 3717 2471930 24 8431 7985 7536 6953 6375

CUBE-300 40 50 36 29 32 x 32 30 x 30 355 6.9 5777 4227905 32 14727 14266 13788 13223 12614 9178

CUBE-360 46 5611/16 391/8 293/8 38 x 38 36 x 36300 6.9 8092 6023690 30 18611 17884 17115 16236 15243

CUBE-420 52 653/16 44 35 44 x 44 42 x 42220 6.5 9353 5075600 29 25508 24604 23451 22295 21023

CUBE-480 58 743/16 481/8 36 50 x 50 48 x 48180 5.5 11016490 24 29988 28697 27291 25704 23674

Upblast Roof Exhaust Belt Drive - CUBEModel CUBE Centrifugal Roof Exhaust fans are belt drive. These fans are specifically designed for roof mounted applications. Exhaust air is discharged directly upward, away from the roof surface. Fan wheels are centrifugal, backward inclined, and constructed of aluminum. Adjustable motor pulleys allow for final system balancing.

PERFORMANCEPerformance capabilities range from 258 cfm to 30,000 cfm and up to 5 in. wg of static pressure.


MODEL HP RPM TS SONES @ 0 in.MAXBHP


0 .125 .25 .375 .5 .625 .75 1

CUBE-098-4G-QD1259-1725 RPM

1/4 HP, 115/60/1 ODP

1160 3302 9.2 0.006 793 672 522

1330 3786 10.7 0.09 909 804 689 361

1550 4412 13.0 0.14 1060 966 878 644 502

CUBE-101-4G-QD1191-1660 RPM

1/4 HP, 115/60/1 ODP

CUBE-101-3G-QD1408-1820 RPM

1/3 HP, 115/208-230/60/1 ODP

CUBE-101-LMDG-QD960-1820 RPM

860 2505 4.6 0.04 732 625 481

1205 3509 7.7 0.100 1025 957 873 782 662

1660 4834 12.7 0.26 1413 1364 1313 1251 1189 1125 1056 861

1/3 1820 5300 14.3 0.35 1549 1505 1458 1406 1350 1293 1234 1106

CUBE-121-3G-QD1068-1545 RPM

1/3 HP, 115/230/60/1 ODP


685 2342 4.4 0.029 808 669

845 2889 5.3 0.056 997 885 757

1045 3573 6.5 0.105 1233 1141 1053 944 798

1410 4821 11.1 0.26 1664 1594 1528 1463 1398 1315 1224 965

1/3 1545 5283 12.8 0.34 1824 1760 1698 1639 1580 1518 1441 1262

CUBE-141-5G-QD951-1400 RPM

1/2 HP, 115/208-230/60/1 ODP

CUBE-141-7G-QD1215-1595 RPM

3/4 HP, 115/208-230/60/1 ODP


590 2259 5.0 0.040 1068 851

1105 4230 10.9 0.26 2001 1905 1792 1667 1515 1318 998

1/3 1210 4632 12.2 0.34 2191 2106 2006 1896 1772 1628 1442

1390 5322 14.9 0.52 2517 2445 2361 2271 2173 2068 1949 1642

1595 6106 20 0.79 2889 2825 2757 2683 2601 2517 2429 2225

CUBE-161-7G-QD935-1265 RPM

3/4 HP, 115/208-230/60/1 ODP


730 3177 8.1 0.15 2098 1904 1669 1389

875 3808 11.0 0.26 2515 2361 2177 1974 1743 1364

1/3 965 4200 12.4 0.35 2774 2637 2476 2300 2109 1893 1583

1110 4831 15.0 0.54 3190 3072 2940 2796 2640 2475 2297 1770

1265 5505 18.5 0.79 3636 3532 3425 3301 3172 3035 2893 2582

1 1390 6049 22 1.05 3995 3900 3806 3698 3584 3464 3340 3078


630 3051 7.1 0.16 2380 2154 1861 1403

745 3608 9.2 0.26 2814 2616 2448 2143 1763

1/3 820 3971 11.2 0.34 3097 2915 2759 2525 2257 1866

940 4552 13.8 0.52 3551 3388 3243 3115 2879 2654 2363

1075 5206 16.5 0.78 4061 3919 3786 3666 3554 3344 3141 2652

1 1185 5739 18.5 1.04 4476 4347 4223 4108 4005 3903 3702 3336

1 1360 6586 23 1.58 5137 5025 4913 4811 4710 4620 4531 4232

2 1495 7240 28 2.10 5647 5545 5443 5345 5253 5162 5082 4921


500 2797 6.2 0.15 2812 2386 1821

605 3385 8.1 0.26 3402 3054 2674 2144

1/3 665 3721 9.4 0.35 3740 3421 3095 2699 2072

760 4252 12.1 0.52 4274 3993 3718 3413 3048 2517

875 4896 16.3 0.79 4921 4676 4438 4192 3922 3626 3240

1 960 5372 18.7 1.04 5399 5175 4957 4742 4508 4253 3985 3168

1 1100 6155 23 1.57 6187 5991 5798 5610 5420 5216 5006 4528

2 1210 6771 25 2.09 6805 6628 6450 6279 6108 5932 5747 5349

CUBE Performance Data - In StockStock Model CUBE fans include disconnect switch, UL/cUL 762 label and heat baffle.

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

F A N S18

19F A N S

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

MODEL HP RPM TS SONES @ 0 in.MAX BHP

PERFORMANCE IN INCHES WG0 .125 .25 .375 .5 .625 .75 1

CUBE-240-LMDG-QD 410-930 RPM

410 2629 6.4 0.18 3716 3169 2471

465 2982 7.6 0.26 4215 3767 3187 21621/3 510 3271 8.9 0.34 4623 4242 3716 3134

585 3752 11.5 0.51 5303 4960 4539 4093 3565

670 4297 14.3 0.79 6073 5762 5460 5052 4059 4202 3524

1 735 4714 16.6 1.04 6663 6370 6133 5764 5409 5037 4618

1 845 5419 19.6 1.58 7660 7399 7183 6947 6615 6304 6002 5282

2 930 5965 24 2.10 8431 8194 7985 7798 7536 7233 6953 6375


1/3355 2834 6.9 0.31 5777 5131 4226

365 2914 7.2 0.34 5939 5316 4463

420 3353 9.0 0.52 6834 6314 5659 4820

480 3832 11.0 0.77 7811 7376 6844 6231 5440

1 530 4231 13.3 1.05 8624 8231 7771 7245 6636 5879

1 605 4830 17.0 1.56 9845 9500 9127 8705 8226 7707 7083

2 665 5309 20 2.07 10821 10508 10192 9410 8967 8495 7270

3 765 6108 24 3.15 12449 12176 11903 11607 11273 10938 10553 9743

5 905 7226 32 5.19 14727 14496 14266 14036 13788 13505 13203 12614


MODEL HP RPM TS SONES @ .5 IN.MAXBHP


.5 .75 1 1.25 1.5 1.75 2 2.25 2.5

CUBE-141HP-LMDG-QD895-2110 RPM

895 3426 6.1 0.055 330

1465 5609 14.2 0.26 1015 920 797 642

1/3 1605 6145 15.2 0.34 1146 1062 965 845 703

1845 7064 17.0 0.52 1363 1292 1218 1136 1041 923 800

2110 8078 19.8 0.78 1592 1535 1472 1408 1341 1261 1178 1073 965


795 3850 8.3 0.22 1570

1/3 925 4480 10.8 0.35 2104 1687

1065 5158 13.8 0.53 2581 2323 1932

1215 5884 15.0 0.79 3062 2867 2626 2286 1853

1 1335 6465 18.7 1.04 3440 3260 3075 2839 2523 2155

1 1530 7410 24 1.57 4034 3884 3728 3574 3375 3134 2859 2533

2 1685 8160 27 2.09 4495 4369 4225 4085 3945 3767 3574 3324 3061


675 4329 9.4 0.52 3405 2606

775 4970 13.1 0.78 4232 3704 2940

1 850 5451 14.5 1.04 4811 4367 3845 3024

1 975 6253 18.4 1.56 5736 5386 4988 4538 4005

2 1070 6863 22 2.08 6404 6112 5774 5407 4990 4549 3624

3 1230 7889 26 3.16 7513 7279 7016 6729 6409 6090 5709 5325 4721

CUBE Performance Data - In StockStock Model CUBE fans include disconnect switch, UL/cUL 762 label and heat baffle.

CUBE-HP Performance Data - In StockStock Model CUBE-HP fans include disconnect switch, UL/cUL 762 label and heat baffle.

BC*D

A

13/4 in.

23F A N S

For complete product information refer to catalog Series C, or

contact your local representative.

C

*

A

B**

Wal

l Op

enin

g

5 in.

Greenheck Fan Corporation certifies that the CW and CWB models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

*Note: 2 inches minimum. 5 inches when motorized damper is required.

CW CONDENSED PERFORMANCE & DIMENSIONAL DATA Performance for available IN STOCK SIZES is shown on page 25

**May be greater depending on motor. All dimensions in inches.Performance certified is for installation type A: Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.^Dampers should not be used in grease applications.

UL/cUL 705UL/cUL 762 (size 98 and up)MH11745 - CW/CWB

IN STOCK SIZES not available for High Pressure

CW HIGH PRESSURE CONDENSED PERFORMANCE & DIMENSIONAL DATA

MODEL A B** C WALL OPENINGDAMPER

SIZE^IN STOCK SIZES ()

MIN/MAX RPM

SONES @ 0 in.

PERFORMANCE IN INCHES WG0 .125 .25 .5 .75 1.5

CW-060 183/8 13 14 8 x 8

8 x 8

1050 1.7 133 811550 4.2 197 164 128

CW-065 183/8 13 14 8 x 8 1050 2.2 180 1091550 4.7 266 222 172

CW-070 183/8 13 14 8 x 8 1050 2.6 250 1711550 5.5 369 325 269

CW-075 183/8 13 14 8 x 8 1050 3.4 287 1881550 6.0 424 359 291

CW-080 21 133/8 177/8 10 x 10

10 x 10

1050 3.8 325 247 1331550 7.3 480 431 376 235

CW-085 21 133/8 177/8 10 x 10 1050 4.0 389 305 1821550 7.5 574 520 461 312

CW-090 21 133/8 177/8 10 x 10 1050 4.1 549 451 3061550 7.8 811 744 677 501

CW-095 21 15 177/8 10 x 10 1050 5.3 711 570 3811550 9.6 1049 964 861 616

CW-098 247/8 28 19 12 x 12

12 x 12

860 8.4 588 4091725 13.8 1180 1094 1017 824 586

CW-101 247/8 28 19 12 x 12 860 4.6 732 625 4811725 13.3 1468 1422 1373 1255 1129

CW-121 247/8 28 19 12 x 12 860 5.3 1015 905 7811725 15.6 2037 1979 1923 1816 1710 1176

CW-131 247/8 28 19 12 x 12 860 8.5 1180 1057 9141725 18.8 2366 2305 2244 2122 1994

CW-141 287/8 29 221/8 15 x 15 15 x 15

860 7.3 1558 1427 12641725 26 3125 3066 3005 2865 2711 2085

CW-161 287/8 29 221/8 15 x 15 860 10.7 2472 2315 2126 16801140 15.7 3277 3161 3035 2745 2421

CW-180 353/8 285/8 27 17 x 17 17 x 17

860 12.3 3249 3074 2922 24741140 17.6 4307 4173 4045 3822 3470

CW-200 353/8 285/8 27 17 x 17 860 15.7 4837 4587 4346 3815 30841140 24 6412 6224 6036 5674 5283 3445

MODEL A B** C WALLOPENINGDAMPER

SIZE^MIN/MAX

RPMSONES @ .5 in.

PERFORMANCE IN INCHES WG.5 .75 1 1.25 1.5 1.75 2

CW-161HP 287/8 29 221/8 15 x 15 15 x 151140 12.5 1645 1444 11751725 22 2787 2680 2560 2439 2310 2167 2003

CW-180HP 353/8 285/8 273/4 17 x 17 17 x 17 1725 28 4613 4493 4353 4215 4078 3914 4340

Sidewall Exhaust - CW/CW-HP/CWB/CWB HPThese fans are ideal for exhausting contaminated air out and away from buildings. Fan wheels are centrifugal, backward inclined, and constructed of aluminum.Model CW Sidewall Exhaust fans are the centrifugal direct drive type. Model CWB Sidewall Exhaust fans are the centrifugal belt drive type. Adjustable motor pulleys allow for final system balancing.

PERFORMANCECW performance capabilities range from 70 cfm to 3,277 cfm and up to 1.5 in. wg of static pressure.

CWB performance capabilities range from 258 cfm to 12,449 cfm and up to 2.75 in. wg of static pressure.

CWB PERFORMANCE DATA - IN STOCK


Stock model CWB fans include birdscreen, disconnect switch, UL/cUL762 and heat baffle.

Stock Model CW fans include birdscreen, disconnect switch, UL/cUL 705 label.

MODEL RPM TS SONES @ 0 in.MAXBHP


0 .125 .25 .375 .5 .625 .75

CW-065-DGEX-QD1/30 HP3 Speed

E 1050 2234 2.2 .009 180 109

G 1300 2765 3.2 .017 223 170 97

D 1550 3297 4.8 .028 266 222 172 95


E 1050 2234 2.5 .008 250 172

G 1300 2765 4.1 .015 309 255 152

D 1550 3297 5.6 .026 369 325 269 160


E 1050 2234 3.3 .012 287 188

G 1300 2765 4.4 .024 356 279 185

D 1550 3297 6.1 .039 424 359 291 204


E 1050 2990 3.8 .016 325 248 133

G 1300 3701 5.4 .031 403 343 272 173

D 1550 4413 7.3 .054 480 431 376 315 236


E 1050 2990 3.6 .018 389 305 182

G 1300 3701 5.4 .035 482 416 340 235

D 1550 4413 7.5 .061 574 520 462 395 313 161


E 1050 2990 3.8 .027 550 450 306

G 1300 3701 5.4 .052 680 600 516 391

D 1550 4413 7.5 .088 811 744 677 603 501 347

CW-095-DGEX-QD1/8 HP

3 Speed

E 1050 2990 4.9 .037 711 569 381

G 1300 3701 7.4 .072 880 773 641 484 200

D 1550 4413 9.6 .121 1049 964 861 746 616 443

CW-101-BX-QD1/6 HP B 1140 3320 7.2 0.09 970 896 806 707

CW-121-BX-QD1/6 HP B 1140 3898 7.4 0.14 1346 1260 1179 1091 980 833

CW-141-BX-QD1/4 HP B 1140 4364 11.3 0.29 2064 1972 1864 1744 1604 1429 1166

MODEL HP RPM TS SONES @ 0 inMAX BHP


0 .125 .25 .375 .5 .75 1 1.25 1.5 1.75

CWB-141-LMDG-QD590-1590 RPM

590 2259 7.3 0.04 1069 851

1090 4173 10.7 0.25 1975 1877 1763 1633 1476

1/3 1200 4594 12.1 0.34 2174 2088 1987 1875 1749 1410

1400 5360 15.2 0.53 2537 2465 2382 2292 2196 1974 1675

1590 6087 19.9 0.78 2881 2817 2748 2674 2592 2420 2213 1952

1 1725 6605 26 1.0 3125 3066 3005 2936 2865 2711 2539 2339 2085 1704

CWB-180-LMDG-QD545-1480 RPM

740 3584 9.1 0.25 2795 2596 2422 2115 1723

1/3 830 4019 11.4 0.36 3135 2954 2799 2575 2315

960 4649 14.2 0.55 3626 3466 3323 3197 2981 2487

1070 5182 16.4 0.77 4042 3898 3765 3645 3533 3113 2613

1 1200 5811 18.8 1.08 4533 4405 4281 4168 4066 3778 3411 2948

1 1360 6586 22 1.58 5137 5024 4911 4809 4710 4531 4229 3909

2 1480 7168 26 2.03 5591 5487 5383 5284 5193 5021 4845 4517

CW PERFORMANCE DATA - IN STOCK

25F A N S

Performance certified is for installation type A: Free inlet, Free outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

Sidewall Exhaust - CW/CW-HP/CWB/CWB HP

Performance certified is for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type A: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

26 F A N S

For complete product information refer to catalog Model RSF & RSFP, or contact your local representative.

Greenheck Fan Corporation certifies that the RSF/RSFP models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

RSF STANDARD CONDENSED PERFORMANCE & DIMENSIONAL DATA

B

C

2A 1/2 in.

RSF

BL

CL

2A1/2 in.

RSFP

UL/cUL 705E40001 - RSF

MODEL A (Sq.) B (Sq.) C RECOMMENDED ROOF OPENINGDAMPER

SIZE CFMPERFORMANCE IN INCHES WG

.125 .25 .5 1 1.5 2

RSF-90 26 351/8 25 15 x 15 12 x 12

650 435 569

1530 707 783 924 1172 1385

2300 994 1048

RSF-100 30 411/8 25 17 x 17 14 x 14

700 377 505

2500 796 852 957 1146 1314 1468

3400 1052 1089

RSF-120 34 471/8 27 21 x 21 18 x 18

1150 330 430

3220 615 664 760 930 1079 1213

4600 844 877

RSF-150 40 531/8 31 23 x 23 20 x 20

1625 274 363

4730 516 588 641 784 913 1030

6800 708 739

RSF-180 46 611/8 34 29 x 29 26 x 26

2450 241 317

7220 478 516 581 691 799 901

10400 665 687

RSF-200 52 731/8 39 33 x 33 30 x 30

2900 200 266

11260 488 509 553 639 719 794

14300 609 626

Roof Supply Fans - RSF/RSFPModels RSF and RSFP are roof mounted, filtered supply fans designed to provide efficient and economical make-up air. Galvanized steel housings are designed for maximum airflow and weather protection.

PERFORMANCEPerformance capabilities range from 650 to 14,300 cfm and up to 2 in. wg of static pressure.

All dimensions in inches. Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP/kW) does not include transmission losses. Performance ratings include the effects of 1 in. aluminum filters.

BA D

C

E

29F A N S

Supply Air Fan - SAF

STANDARD CONSTRUCTION FEATURES Heavy gauge galvanized steel housing Double width, double inlet forward curved wheel Removable cover allows complete accessibility to blower assembly 1 inch washable aluminum filters, easily removable for cleaning Vibration isolation for entire blower assembly AMCA Certified Ratings Seal for Sound and Air Performance Mounted and wired Nema-1 disconnect switch Lifting lugs Energy efficient motor UL/cUL 705 Electrical

OPTIONS AND ACCESSORIES Duct adaptors (In Stock) Curb adaptors Gravity and motorized dampers (In stock) High velocity supply dampers Galvanized roof curbs (In stock) Aluminum roof curbs (See pages 114-115) Curb extensions Replacement filter sets Curb seal Curb adapter/reducer

SAF PERFORMANCE DATA - IN STOCK IN STOCK SIZES are galvanized steel construction and include washable aluminum filters. UL/cUL 705.

MODEL CFM OVMAXBHP

PRESSURE IN INCHES WG

.125 .25 .5 1 1.5 2 2.5 3

SAF-110-LMDX-QD

820 877 0.08 RPM 432 549

1180 1263 0.22 RPM 525 616 780

1540 1658 0.55 RPM 632 707 844 1082

1900 2033 1.02 RPM 745 809 927 1140 1328

2260 2418 1.05 RPM 859 920 1023 1210

2620 2803 0.97 RPM 977 1032

SAF-112-LMDX-QD

1250 1850 0.11 RPM 390 483

1750 2590 0.31 RPM 459 549 682

2250 3330 0.49 RPM 549 615 745

2750 4070 1.04 RPM 647 698 810 990

3250 4810 1.45 RPM 748 790 880 1063

3750 5550 1.5 RPM 849 888 962

SAF-115-LMDX-QD

1300 2717 0.23 RPM 316 407 546

2000 4180 1.05 RPM 387 463 586 781 934

2700 5643 1.89 RPM 479 534 642 821 970 1098

3400 7106 1.91 RPM 577 621 712 870 1011

4100 8569 2.04 RPM 677 717 785 935

4800 10032 1.96 RPM 780 815

SAF-118-LMDX-QD

2500 7400 0.37 RPM 294 359 466

3700 10952 1.67 RPM 376 426 516 664 800

4900 14504 4.46 RPM 466 508 582 713 828 932 1034 1127

6100 18056 4.73 RPM 563 594 661 775 878 973 1059

7300 21608 4.63 RPM 662 688 744 846 939

8500 25160 4.64 RPM 760 786 831

Performance certified is for Model SAF exhaust for installation type A: Free inlet, Free outlet. Power rating (BHP) does not include transmission losses. Performance ratings include the effects of filters in the airstream.The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free eld calculated per AMCA Standard 301. Values shown are for installation type A: Free inlet fan sone levels.


31F A N S

KSFD and KSFB - Arr. DB3

B

A

10 ft.min.

B

A

A

B

10 FT. HORIZONTAL SEPARATION COMBINATION PACKAGE - EXTENDED WEATHERHOOD

3 FT. VERTICAL SEPARATION COMBINATION PACKAGE - STANDARD WEATHERHOOD

A

B 3 ft.min.

STAND ALONE - EXTENDED WEATHERHOOD

All dimensions are in inches.*Maximum dimensions (dependent on CUBE fan).

KSFD and KSFB - Arr. DBC

Dimensions are in inches and include mixing box and standard weatherhood. For roof opening dimensions and locations refer to factory submittal.

Consult your representative for dimensional data when the evaporative cooling option is selected.

Housing Size A B Width

H05 172 15 20

H08 166 15 37

H15 146 23 32

H25 153 30 41

KSFD and KSFB - Arr. DB

Housing Size A* B* Width*

H05 71 50 25

H08 83 53 36

H15 132 55 43

H25 165 67 59

Housing Size A* B* Width*

H05 201 50 25

H08 208 53 36

H15 197 55 43

H25 218 67 59

All dimensions are in inches.


H05 41 15 20

H08 41 15 37

H15 81 23 32

H25 100 30 41


H05 32 19 20

H08 32 19 37

H15 72 26 32

H25 82 34 41

KSFD and KSFB - Arr. Hz

KSFD and KSFB - Arr. DBB

A

DBHz.

STAND ALONE - STANDARD WEATHERHOOD

Make-Up Air Systems - KSFD & KSFB

All dimensions are in inches.*Maximum dimensions (dependent on CUBE fan).

All dimensions are in inches.

33F A N S

C

B A

DE

All dimensions in inches.Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings include the effects of an inlet grille and backdraft damper. Speed (RPM) shown is nominal. Performance is based on actual speed of test. The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values are for installation type B: free inlet sone levels. The AMCA Certified Ratings Sound Seal applies to sone ratings only.

For complete product information refer to catalog Model SP and

CSP, or contact your local representative.

Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q dSP PERFORMANCE & DIMENSIONAL DATA - IN STOCK

UL/cUL 507E33599 Ceiling Exhaust Fans are also UL Listed for sizes 50 through 390 for above bathtub/shower with GFCI branch protected circuit. File No. E33599

MODEL A B C

OUTLETRPM AMPS WATTS SONES @ 0 IN. GRILLE SIZE

PERFORMANCE IN INCHES WGD E 0.00 .100 .125 .250 .375 .500 .625 .750 1.00

SP-C50-QD 7 7 35/8 3 dia. x 15/8 1680 0.80 46 2.9 9 x 9 52 49 48 46 43 37 29

SP-B50-QD 137/8 11 615/16 4 dia. x 625 0.50 38 1.7 14 x 12 67 53 51 40 29

SP-B70-QD 137/8 11 615/16 4 dia. x 675 0.53 45 1.7 14 x 12 77 70 68 57 49 39

SP-B80-QD 137/8 11 615/16 4 dia. x 900 0.60 54 2.9 14 x 12 87 80 78 68 61 54 44 30

SP-B90-QD 137/8 11 715/16 6 dia. x 1 700 0.65 50 1.9 14 x 12 102 92 88 75 59 45 30

SP-B110-QD 137/8 111/2 715/16 6 dia. x 1 950 1.14 80 2.0 14 x 12 133 114 110 97 95 94 91 85 50

SP-B150-QD 137/8 111/2 715/16 6 dia. x 1 1050 1.70 129 3.0 14 x 12 160 156 155 154 152 149 147 138 92

SP-B200-QD 137/8 111/2 715/16 6 dia. x 1 1100 2.20 173 4.4 14 x 12 197 195 194 191 187 184 181 166 128

SP-A50-QD 137/8 105/8 115/8 6 dia. x 1 700 0.31 18 0.7 14 x 12 76 51 47 30

SP-A70-QD 137/8 105/8 115/8 6 dia. x 1 850 0.27 20 1.1 14 x 12 83 70 66 42

SP-A90-QD 137/8 105/8 115/8 6 dia. x 1 900 0.34 29 1.1 14 x 12 99 88 84 61 25

SP-A110-QD 13 105/8 10 8 6 950 0.58 49 1.3 14 x 12 119 110 106 88

SP-A125-QD 13 105/8 10 8 6 1100 0.62 53 1.4 14 x 12 135 123 121 104

SP-A190-QD 13 105/8 10 8 6 1400 1.30 113 3.2 14 x 12 216 197 192 167 133

SP-A200-QD 137/8 11 65/8 8 8 900 0.43 48 2.0 14 x 12 247 225 220 196 172 142 105 67

SP-A250-QD 14 117/8 11 8 8 1000 0.77 83 2.9 14 x 12 272 251 246 227 210 185 157 119

SP-A290-QD 14 117/8 11 8 8 1050 0.72 81 3.2 14 x 12 315 293 287 257 231 207 175 124

SP-A390-QD 14 117/8 11 8 8 1350 1.34 135 5.4 14 x 12 410 395 391 368 345 325 307 279

SP-A410-QD 18 143/8 14 8 8 1000 1.74 121 4.1 193/8 x 163/8 443 413 405 351 305

SP-A510-QD 18 143/8 14 8 8 1070 3.30 224 6.1 193/8 x 163/8 557 512 501 439 392 325

SP-A700-QD 137/8 111/2 115/8 191/2 8 1100 3.20 350 1.9 251/8 x 131/2 757 729 723 700 679 649 613 560 396

SP-A710-QD 18 143/8 14 10 8 1080 4.40 285 7.4 193/8 x 163/8 752 714 701 653 588 485 320

SP-A780-QD 18 143/8 14 10 8 1600 3.30 348 10.2 193/8 x 163/8 812 782 775 741 704 665 625 581

SP-A900-QD 23 143/8 14 18 8 950 4.00 285 5.2 25 x 163/8 955 907 896 841 773 701

SP-A1050-QD 23 143/8 14 18 8 1095 6.30 420 7.2 25 x 163/8 1125 1059 1043 964 885 796 662

SP-A1410-QD 23 143/8 14 18 8 1450 7.40 786 11.6 25 x 163/8 1455 1414 1404 1353 1307 1262 1218 1174

SP-A1550-QD 23 143/8 14 18 8 1610 8.60 818 12.4 25 x 163/8 1607 1568 1558 1506 1449 1407 1369 1323

Ceiling Exhaust - SP

B A

C D

E

C

D

B A

E

BA

C D

E

SP-C50 SP-A110 through SP-A510and SP-A710 & SP-A780

SP-B50 through SP-B200 SP-A700, SP-A900& SP-A1550

Greenheck Fan Corporation certifies that the SP models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

CAB

Ddia.

InletF x G

B A

C

DE

F

G

A

C

B

37F A N SAll dimensions in inches.

All dimensions in inches.All dimensions in inches.

All dimensions in inches.

B

Dia. DC

A

11/2 in.

MODEL RCC-7 Weathertight aluminum construction Integral birdscreen Built in curb cap Requires roof curb

A

B

CD

E

MODEL RJ Pitched Roof Cap Steel construction with black enamel finish Integral flashing flange Built in birdscreen and damper

B

CD

Dia.A

13/4 in.

111/8

31/210

91/4

11 1/251/8

MODEL GRS All aluminum exterior construction Galvanized steel internal supports Integral birdscreen Built in curb cap Requires roof curb

MODEL EL - 10x3 Elbow Discharge with Grille Designed for installation under roof eaves Painted steel louvered grille Built in damper For SP/CSP sizes 50-290

CURB CAP

B

Dia. DC

A

MODEL RFC-7 Weathertight aluminum construction Integral birdscreen Built in flashing flange

B

CD

Dia.A

MODEL GRSF All aluminum exterior construction Galvanized steel internal supports Integral birdscreen Built in flashing flange

FLASHING FLANGE

HANGING VIBRATION ISOLATORSVibration isolator kits are available for suspended installations. Kits include all hardware necessary to mount one unit, with the exception of 10-32 threaded rod to be supplied by others. Fan mounting brackets include prepunched mounting holes for ease of installation.

MODEL FOR USE WITH SIZES A B C D Dia.

RCC-7 50-390 15 12 10 63/8 7

GRS-10 410-710 19 20 6 3 10

GRS-12 780-1050 22 24 77/8 3 12

GRS-16 1410-2150 26 285/8 8 3 165/16

GRS-20 3600 30 35 9 4 205/16

MODEL FOR USEWITH SIZES A B C D E THROAT

RJ-4 C50, B50-B80 11 9 8 55/16 4 4 in. Dia.

RJ-6 x 9 B90-B200 A50-A390 18 14 14 103/8 6 6 x 9

RJ-10 x 10 A410-A1050 18 27 15 235/8 9 10 x 10

MODEL FOR USE WITH SIZES A B C D Dia.

RFC-7 50-390 18 12 10 63/8 7

GRSF-10 410-710 23 20 6 3 10

GRSF-12 780-1050 26 24 77/8 3 12

GRSF-16 1410-2150 30 285/8 8 3 165/16

GRSF-20 3600 34 35 9 4 205/16

UNIT SIZE A B

B50-B200 4 155/8

A50-A190 5 145/8

A200-A390 6 15

A410, A510 A710, A780 9 19

5/8

A700 5 251/8

A900-A1050 A1410-A1550 9 25

3/8

A1750, A2150 9 36

A3600 9 485/8

Roof Discharge Accessories

Flat Roof Caps

AB

10-32 hangingsupport rod

by others

CD

E

AB

RJ-4 & RJ-6 x 9

RJ-10 x 10

38 F A N S

MODEL WL Wall Louvered Discharge Anodized

aluminum grille Built in damper Not recommended

for exterior applications exposed to severe weather conditions. An external wall louver is recommended for such applications.

MODEL WC (Round Connection)Hooded Wall Cap Aluminum construction -

aluminum finish For outside wall

applications Built in birdscreen (not

available on WC-4) and damper

MODEL WC (Square/Rectangular Connections)Hooded Wall Cap Steel construction with

black enamel finish For outside wall

applications Built in birdscreen and

damper

MODEL RDC Round Duct Connector Replaces the standard

square discharge duct- connector and damper.

Uses existing mounting holes

Galvanized steel construction

RDC 6 includes a damper RDC 8 does not include a

damper

MODEL BVEBrick Vent Designed for installation in masonry walls Anodized aluminum construction Built in aluminum mesh insect screen

30

20

10

98

7

6

5

4

3

2

1.01 .02 .03 .04 .05 .06 .07 .08 .09.10 .2 .3 .4 .5 .6

Pressure Drop in Inches of Water Gauge

Above accessories tested with 4 feet of inlet duct

WC-10x3WC-6RJ-6x9EL-10x3WL-10x3BVE-808RFC-7RCC-7

BVE-128WC-8x8WC-8

BVE-157WC-18x8

RJ-10x10

WL-18x6

CF

M x

100

ACCESSORY PRESSURE DROPSThe chart below can be used with all of the discharge accessories shown on these two pages. Specific pressure drop values for these accessories must be included in total system calculations for proper fan selection.

*Used in conjunction with RDC-6.





B

ECA

DE

D

A

G

C

B

E

F

EB

C

AD

RDC-6

RDC-8

MODEL FOR USEWITH SIZES A B C D E

WC-4 C50, B50-B80 6 6 4 2 8.5

WC-6 B90-B200A50-A190 8 8 6 41/8 8.5

WC-8 A200-A510 11 11 8 51/8 8.5

MODEL FOR USEWITH SIZES A B C D E F G

WC-10 x 3 50-290 5 12 3 10 111/8 4 5

WC-8 x 8 200-510 10 10 8 8 8 6 5

WC-18 x 8 700-1550 10 20 8 18 18 6 5

MODEL FOR USEWITH SIZES A B C D E

WL-10 x 3 50-290 12 5 10 7 3

WL-18 x 6 390-1550 19 8 18 9 6

MODEL FOR USEWITH SIZES A B C

BVE808 50-290 81/8 7 4

BVE128 390-510 12 7 4

BVE157 700-1050 155/8 7 4

MODEL FOR USEWITH SIZES DIA.

RDC-6 A110-A190 6

RDC-8 A200-A510 8

Wall Discharge Accessories

B

C

A

MODEL TR 6x4Transition Duct Reducer Reduces duct from 6 to 4 inches. Galvanized steel construction

MODEL FOR USEWITH SIZES

TR 6 x 4

B50-B200

A50-A90

A110-A190*

39F A N S

Fans used in most applications, even where air is not excessively dirty, will collect airborne dirt on wheels and motors over time. Accumulations of dirt on the fan wheel will sharply reduce performance and cause imbalance. Dirt buildup on the motor can cause it to overheat. All of these conditions will shorten the life of the fan. To help reduce this accumulation, washable aluminum mesh filters are available to trap dirt before it enters the fan. These filters should be regularly cleaned to maintain performance. Fig. A (Filter Loss Chart) shows the effect the filter will have on performance. To determine the added resistance, divide the desired cfm by the filter area (ft2). This will give FPM. Use this with the filter loss chart to get the added resistance.In addition to reducing dirt accumulations on the motor and wheel, filters also reduce sound levels.

MeshFilter

SPGrille

0 1 2 3 4 5 6 7 8 9 Velocity FPM x 100

.24

.22

.20

.18

.16

.14

.12

.10

.08

.06

.04

.02

.00

Res

ista

nce

in w

.c.

FILTER LOSS CHART

FIG. A

H1BLK

SWITCH BOX

SWITCH

115 V MOTOR

277 V SUPPLY

277V TO 115V TRANS.750 VA

H2 H3

REDX1 X2

RED

BLK BLK

Model T-2.0 - UL/cUL Listed Rated for 230/277 to 115, 2 Amps

Model T-4.3 - UL/cUL Listed Rated for 230/277 to 115, 4.3 Amps



Transformers are available for applications requiring voltage reduction. Selection is based on motor amperage. All transformers are shipped loose.

TRANSFORMERS

FILTERS

CEILING RADIATION DAMPERSThe Greenheck SP-A and SP-B ceiling radiation dampers are UL/cUL Classified, rated at three to four hours fire resistance, and are available on all SP-A and SP-B fans and fan/light combinations. This design saves space by allowing the dampers to be mounted directly beneath the fan.

Model MDW - For use on fan or lights. Available shipped loose. Rated for 115V UL/cUL Listed Requires 2 x 4 handy box

MOTION DETECTORSMotion detectors may be used with Models SP and CSP fans, or fan and light combinations. Motion detectors use a passive infrared motion detector that will automatically turn on the fan when a change in temperature is sensed. They have a viewing area of 180 degrees, however they must be placed in the line-of-sight. They also have an adjustable time delay shutoff setting of 1 to 20 minutes.

GND.

HOTBLACK

GREEN

RED

LOAD

(12.5 AMPS MAX)NEUTRAL


SP MODEL CRD LENGTH WIDTH HEIGHT

A50 - A190 310 13.38 11.13 3

B50 - B200A200 - A390

320 14.38 12.25 3

A410 - A510A710 - A780

350 18.44 14.81 3

A-700 700 24.19 12.31 3

A900 - A1550 360 24.19 14.81 3

SP MODELDESIGNER

GRILLEFILTERMODEL

FILTERAREA (FT2)

SP-A50 - A190 F-200 F-210 .620

SP-B50 - B200, A200 - A390 F-200 F-220 .785

SP-A410 - A510SP-A710 - A780

NA F-250 1.319

SP-A900 - A1550 NA F-260 1.797

Accessories

1 in.

C

B

2 in.

A

DAMPEROUTLET

OPENING

INLETOPENING

D

E

W

H

F C

E

A

1 in.

B

42 F A N S

For complete product information refer to catalog Models SQ and BSQ or contact your local representative.

A

C sq.

D*

C sq.B sq.

Greenheck Fan Corporation certifies that the SQ, BSQ models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and AMCA Publication 311 and comply with the requirements of the AMCA Certified Ratings Program.

A 1 in.1 in.

C sq.

B sq.

C sq.

B sq.

SQ STANDARD CONDENSED PERFORMANCE RANGES & DIMENSIONAL DATA Performance for available IN STOCK SIZES is shown on page 44

* May vary depending on motor size.

SQ

BSQ

All dimensions in inches.Performance certified is for installation type B: Free inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

UL/cUL 705E40001 - SQ/BSQ

MODEL A B C DAMPER SIZEIN STOCKSIZES ()

MIN/MAXRPM

SONES@ 0 in.


0 .125 .25 .5 .75 1 1.25 1.75

SQ-60 13 12 87/8

9 x 9

1050 1.7 1261550 4.0 186 145 105

SQ-65 13 12 87/8 1050 2.1 154 791550 4.2 228 184 128

SQ-70 13 12 87/8 1050 2.7 212 1181550 5.6 313 252 189

SQ-75 13 12 87/8 1050 3.6 241 1461550 6.1 356 294 229SQ-80 16 15 117/8

12 x 12

1050 3.8 306 225 1041550 7.3 451 394 342 201SQ-85 16 15 117/8 1050 4.0 357 272 1421550 7.6 528 474 413 254SQ-90 16 15 117/8 1050 4.0 500 369 1881550 7.6 738 654 564 334SQ-95 16 15 117/8 1050 4.9 623 475 2741550 9.6 919 829 720 461SQ-100 21 17 137/8 14 x 14 860 4.8 725 611 4101725 13.1 1454 1402 1349 1227 1077 830SQ-120 21 19 157/8 16 x 16 860 4.5 971 843 7041725 14.7 1948 1883 1818 1692 1562 1416 1239SQ-130 21 21 177/8 18 x 18 860 6.3 1180 1048 8901725 17.4 2368 2307 2247 2105 1961 1791 1559

SQ-140 22 23 197/8 20 x 20 860 7.1 1637 1487 13161725 20 3283 3211 3139 2985 2825 2645 2424 1624SQ-160 26 26 227/8 23 x 23 860 8.9 2506 2334 2147 16051725 26 5027 4941 4856 4683 4504 4312 4094 3575

Inline Direct Drive and Belt Drive - SQ/BSQModels SQ and BSQ are the ideal selection for clean air applications (intake, exhaust, return, or make-up air systems) where space is a prime consideration. Fan wheels are centrifugal, backward inclined, and constructed of aluminum.

Model SQ Centrifugal Inline fans are direct drive. Maximum operating temperature is 130 F

Model BSQ Centrifugal Inline fans are belt drive. Maximum operating temperature is 180 F.

PERFORMANCESQ performance capabilities range from 80 cfm to 5,025 cfm and up to 1.75 in. wg of static pressure.

BSQ performance capabilities range from 62 cfm to 26,600 cfm and up to 3.5 in. wg of static pressure.

44 F A N S

SQ PERFORMANCE DATA - IN STOCK

Base Vibration IsolatorModel BVI

Backdraft Damper Model WD-330

Hanging Vibration Isolator - Model HVI(Hanger rods supplied by others)

Housing Insulation Kit

SQ & BSQ OPTIONS AND ACCESSORIES

Stock Model SQ fans include disconnect switch. Sizes 100 and above also include a motor cover and UL/cUL 705.


MODEL HP RPM TS SONES @ 0 IN.MAXBHP

PERFORMANCE IN INCHES WG0 .125 .25 .375 .5 .625 .75 1 1.25

SQ-75-DGEX-QD3-Speed

1/90 1050 2233 3.6 0.011 241 146

1/45 1300 2765 4.1 0.210 298 224 133

1/25 1550 3297 6.1 0.035 356 294 229 137


1/50 1050 2989 3.8 0.016 306 225 104

1/30 1300 3701 5.4 0.032 378 312 244 140

1/15 1550 4412 7.3 0.055 451 394 342 280 201


1/140 1050 2989 4.0 0.017 357 272 142

1/30 1300 3701 5.5 0.033 442 377 298 185

1/15 1550 4412 7.6 0.057 528 474 413 343 254


1/50 1050 2989 4.0 0.020 500 369 188

1/25 1300 3701 5.4 0.040 619 519 397 245

1/10 1550 4412 7.6 0.068 738 654 564 457 334


1/30 1050 2989 4.9 0.031 623 475 274

1/15 1300 3701 7.6 0.059 771 659 522 352

1/8 1550 4412 9.6 0.100 919 829 720 603 461 276

SQ-100-AX-QD 1725 5052 13.1 0.25 1455 1403 1350 1292 1227 1156 1078 831

SQ-120-AX-QD 1725 5927 14.7 0.48 1948 1884 1819 1754 1692 1625 1563 1417 1240

SQ-140-BX-QD 1/3 1140 4346 10.8 0.30 2107 2061 1942 1818 1666 1447 1121

Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP/kW) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

Inline Direct Drive and Belt Drive - SQ/BSQ

Side DischargeThe side discharge option provides several advantages, from removing a system effect problem, increasing performance, or even reducing installation labor. The most notable is reducing system effects. Notice Fig. 1 how the air, when discharged into the corner, will take several duct lengths before becoming smooth again. This is not the case with a side disharge. Notice now in Fig. 2 as air comes into the fan/corner and leaves the fan/corner you have nice smooth air ow providing a more predictable system. (Remember the duct length prior to or following the installation location should be approximately two to three wheel diameters to achieve catalog performance).

Fig. 1

Fig. 2

Fan

Fan

BSQ PERFORMANCE DATA - IN STOCK

Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP/kW) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories). The sound ratings shown are loudness values in fan sones at 5 ft. (1.5 m) in a hemispherical free field calculated per AMCA Standard 301. Values shown are for installation type B: free inlet fan sone levels. The AMCA Certified Ratings Seal applies to sone ratings only.

Stock Model BSQ fans include disconnect switch, motor cover UL/cUL 705.Order s tock p roduc ts on l i ne a tw w w . g r e e n h e c k . c o m / q d

MODEL HP RPMSONES @

0 IN.MAXBHP

PERFORMANCE IN INCHES WG.125 .25 .375 .5 .625 .75 1 1.25 1.5 1.75

BSQ-70-4X-QD1368-1970 RPM

1/4 HP, 115/60/1 ODP

1370 11.8 0.088 265 227 186 140 901730 16.1 0.18 349 323 293 260 227 192 1121970 19.1 0.26 404 383 358 330 301 272 211 141

BSQ-80-4X-QD1222-1835 RPM

1/4 HP, 115/60/1, ODP

BSQ-80-LMDX-QD1050-2485 RPM

1050 8.0 0.049 372 298 1841835 17.2 0.26 721 688 651 614 571 525 426

1/3 1885 17.7 0.28 742 710 675 640 598 555 459 297 2100 21 0.39 834 805 775 743 711 674 595 508 367 2645 28 0.79 1065 1041 1018 995 970 945 894 835 773 705

BSQ-90-4X-QD1168-1690 RPM

1/4 HP, 115/60/1 ODP


1050 8.0 0.061 547 443 2901360 11.7 0.14 753 684 605 509 3831695 16.0 0.26 966 915 859 798 730 655 439

1/3 1750 16.5 0.29 1000 951 898 841 776 708 528 1910 18.1 0.37 1100 1057 1009 958 904 845 705 517 2220 22 0.59 1291 1255 1216 1175 1132 1086 987 879 733 5401 2690 28 1.05 1578 1548 1519 1487 1453 1419 1347 1270 1185 1097

BSQ-100-4X-QD1073-1610 RPM

1/4 HP, 115/60/1 ODP


1050 7.9 0.073 774 671 4981265 9.8 0.13 966 893 798 6831610 15.0 0.26 1266 1207 1149 1089 1004 917

1/3 1765 16.3 0.34 1398 1345 1292 1240 1179 1101 924 2030 19.7 0.52 1623 1577 1531 1484 1439 1396 1263 1120 2325 23 0.79 1872 1832 1791 1750 1710 1669 1593 1474 1360 12011 2555 26 1.05 2065 2028 1991 1954 1917 1880 1809 1732 1624 1521

BSQ-120-4X-QD923-1370 RPM

1/4 HP, 115/60/1 ODP


1000 7.7 0.102 1026 914 7831370 11.0 0.26 1475 1396 1315 1230 1136 1026

1/3 1500 12.4 0.34 1629 1557 1484 1410 1331 1243 1010 1725 15.2 0.52 1893 1831 1768 1705 1641 1572 1425 1243 1974 19.7 0.785 2183 2129 2075 2020 1964 1908 1791 1663 1518 13071 2170 23 1.05 2410 2361 2312 2262 2212 2161 2059 1951 1833 1709

1 2490 31 1.57 2779 2737 2694 2651 2607 2563 2475 2387 2294 2198


900 7.7 0.087 1084 911 635

1293 11.9 0.26 1652 1563 1462 1328 1170 9581/3 1424 13.7 0.35 1838 1754 1672 1568 1443 1299 1630 16.2 0.52 2126 2050 1983 1908 1820 1714 1468 1121 1866 21 0.78 2448 2389 2324 2266 2202 2128 1949 1740 1462 16861 2053 25 1.05 2702 2655 2592 2357 2484 2426 2286 2117 1926 2359

1 2355 35 1.58 3112 3074 3026 2971 2923 2877 2777 2659 2514


800 6.3 0.11 1362 1185 860

1075 10.7 0.26 1925 1808 1679 1535 13071/3 1180 12.0 0.35 2132 2029 1916 1795 1651 1442 1355 14.2 0.52 2474 2390 2295 2195 2092 1977 1631 1550 16.2 0.78 2852 2781 2702 2619 2532 2442 2246 1955 14291 1710 18.3 1.05 3161 3096 3030 2955 2880 2800 2638 2453 2181 1758

1 1960 24 1.58 3640 3584 3528 3469 3404 3338 3201 3059 2904 27182 2135 30 2.04 3975 3923 3872 3821 3763 3703 3583 3454 3324 3181


650 6.6 0.11 1671 1391860 8.7 0.25 2333 2165 1966 1691

1/3 960 9.8 0.35 2637 2497 2331 2142 1883 1100 12.3 0.52 3058 2941 2808 2662 2500 2296 1265 15.6 0.79 3550 3448 3346 3226 3101 2961 2629 21011 1390 18.0 1.05 3920 3827 3734 3638 3525 3412 3157 2830 2334

1 1590 22 1.57 4509 4428 4347 4266 4184 4086 3887 3664 3397 30652 1750 28 2.08 4979 4905 4831 4757 4683 4610 4431 4247 4044 38103 2000 40 3.07 5710 5645 5581 5516 5451 5387 5256 5100 4943 4770


1/3700 10.0 0.24 2649 2387 2023790 10.6 0.35 3046 2840 2569 2210 1499

905 12.2 0.52 3546 3366 3167 2928 2621 2175 1035 14.5 0.78 4101 3947 3789 3606 3398 3166 24111 1140 16.5 1.04 4545 4408 4265 4122 3944 3755 3283 2510

1 1310 20 1.58 5259 5145 5021 4896 4772 4630 4302 3911 33652 1440 23 2.07 5803 5699 5590 5476 5363 5250 4979 4678 4318 38383 1645 29 3.14 6656 6566 6475 6377 6278 6179 5981 5744 5485 5216


500 10.7 0.35 4518 4001 3325570 12.3 0.53 5279 4845 4363 3704

650 14.3 0.78 6121 5757 5360 4933 43751 715 16.1 1.04 6795 6476 6133 5757 5358 4847

1 820 19.4 1.56 7874 7616 7317 7016 6688 6349 54942 900 22 2.07 8689 8457 8198 7926 7646 7347 6713 58333 1035 28 3.15 10058 9856 9653 9420 9184 8947 8433 7894 7234 63025 1225 41 5.22 11973 11802 11631 11460 11270 11070 10671 10245 9804 9345

Inline Direct Drive and Belt Drive - SQ/BSQ

F A N S 45

46 F A N S

MULTI DISCHARGE POSITIONSBDF fans have been designed for horizontal mounting and are standard with a Bottom Horizontal Discharge. Optional Top Horizontal Discharge is also available. BCF fans are available with either Top Horizontal or Upblast Discharge positions. SQ and BSQ fans are available with Right Side Discharge, Left Side Discharge, Inline Discharge positions, or a combination of Right, Left, and Inline positions.

HORIZONTAL MOUNTINGFor ease of installation knockouts are provided at each location where mounting brackets are shown in diagram below. Universally adjustable brackets are available to mount the fan in hanging or base mounted positions.

HANGING ISOLATORS - Complete hanging isolator kits are available with either neoprene or spring isolators. The isolators are sized to match the weight of the fan. (Hanging rods supplied by others).

BASE ISOLATORS - Complete base isolator kits are available with either neoprene or spring isolators and are sized to match the weight of the fan.

HANGING SPRINGHANGING NEOPRENE

STANDING NEOPRENE STANDING SPRING

A

Acce

ss

Pane

l

C

C A

Inline Fans Options & Accessories - BDF, BCF, SQ & BSQ

BDF Discharge Positions

Bottom Horizontal Top Horizontal

SQ/BSQ Discharge Positions

Right Side Left Side Inline Combination

BCF Discharge Positions

Top Horizontal Upblast

47F A N S

K* is length of fan and filter box combined.All dimensions in inches.

2 in.

K*

Fan

Acces

s

Panel

Filter B

ox

Acces

s

Panel

BDF

MODEL K*FILTER

SIZE NO.

FILTERS

80 49 16 x 20 2

90 547/8 20 x 25 2

100 517/8 20 x 20 2

120 639/16 12 x 25 4

150 621/16 16 x 20 8

180 753/8 20 x 25 6

200 85 16 x 25 12

FILTER BOXFilter boxes incorporate a vee bank design constructed of galvanized steel. Filters are available in 1 in. or 2 in. throwaway (pleated) or permanent (washable aluminum mesh). Side access panels are standard for easy maintenance.

Inline Fans Options & Accessories - BDF, BCF, SQ & BSQ

INSULATED HOUSINGSThe interior of the fan housings and filter boxes can be lined with a fiberglass duct liner for noise reduction and condensation control. The duct liner can be utilized to reduce radiated noise from inline fan housings. It is recommended for applications when fans are placed in acoustically sensitive locations. The duct liner also reduces the noise radiating from the inlet and outlet of the fan.

SQ

MODEL K* FILTER SIZENO.

FILTERS60-75 221/8 10 x 12 180-95 455/8 14 x 25 1100 47 16 x 20 2120 523/16 16 x 25 2130 463/8 20 x 20 2140 523/8 20 x 25 2160 513/8 20 x 20 4

BSQ

MODEL K* FILTER SIZENO.

FILTERS70 - 80 - 90 505/8 14 x 25 1

100 47 16 x 20 2120 523/16 16 x 25 2

130 - 130HP 463/8 20 x 20 2140 - 140HP 523/8 20 x 25 2160 - 160HP 513/8 20 x 20 2180 - 180HP 551/16 20 x 25 4

200 - 200HP 6611/1612 x 25 316 x 25 3

240 - 240HP 687/820 x 25 416 x 25 4

300 - 300HP 721/8 20 x 25 8

360 - 360HP 79 16 x 25 1020 x 25 5

420 931/816 x 25 520 x 25 10

BCF

MODELK*

FILTER SIZE NO. FILTERS

SINGLE FAN

DOUBLE FAN

SINGLE FAN

DOUBLE FAN

SINGLE FAN

DOUBLE FAN

106 206 44 16x20 20x20 1 1107 207 52 16x20 16x20 1 2108 208 56 16x20 16x20 2 4110 210 61 20x20 20x20 2 4112 212 65 16x20 20x25 4 4

AB

E

C

DMax. W/Motor Cover

H

AC

BH

G

A

E

DF

Base Mount UnitsCeiling Hung Units

Motor Positions for Horizontal Fans(Discharge Views)

Airflow Airflow Airflow Airflow

UBCH DBFM DBCHUBFM

Optional Discharge and MountingBracket Locations for Vertical Fans

50 F A N S

LOWER SOUND POWER, BETTER SOUND QUALITYThe sound quality of the QEI is as beneficial to low sound design as is the reduced overall sound power. The sound chart compares units of similar outer tube diameters at an operating point of 20,000 cfm with 1.5 inches wg of static pressure (Ps). Tubular centrifugals (green) have dominant tones in the 63 hz through 250 hz octave bands, while vane axials (red) have more mid to high frequency sound. The QEI does not have a dominant tone. A bystander would hear a more bland sound that is quieter than a tubular centrifugal or vane axial.

QEI

Typical Vane AxialTypical Centrifugal

60

70

80

90

100

62 125 250 500 1000 2000 4000 8000

Frequency, Hz

Sou

nd

Pow

er,

dB

Axial Mixed FlowMixed FlowCentrifugalCentrifugal

Integral, spun inlet cone provides even airflow into the wheel in ducted or non-ducted applications and helps to reduce system effects associated with uneven duct velocity profiles.

Aerodynamically designed straightening vanes improve performance by converting kinetic energy of swirling air into useful static pressure.

Extended collar on inlet and outlet allow for quick and easy slip-fit duct connections to ductwork or plenum wall.

Cast flange mounted bearings are air-handling quality and use concentric bore locking systems for smooth operation. Bearings are selected for a minimum L(10) life in excess of 80,000 hours at the maximum fan class RPM. {Average life - L(50) of 400,000 hours}

Mixed flow wheels are designed with single-thickness, cambered blades to maximize free area and efficiency. Tight wheel to cone tolerances further improve the mechanical efficiency.

Flexible Universal Mounting System allows for field rotation of motor location. Sealed belt guard protects

personnel and minimizes air leakage around motor shaft.

All motors are mounted on adjustable pivot bases for easy adjustments.

Permatector coating is an industrial grade, electrostatic powder paint. Provides a durable, long lasting finish for interior or exterior applications.

Fan Duct

Flexible Sleeve

Mixed Flow - QEIThe QEI mixed flow fan is a low sound, highly efficient alternative for inline ventilation. The unique half-axial, half-centrifugal wheel design captures the highly efficient straight-through airflow of vane axials and the lower sound levels of tubular centrifugal fans to provide an energy efficient product that wont be a noise distraction in your ventilation system.

BG

HA

CF

G

ED

A

C

Horizontal Base MountFig. 1

Horizontal Base MountMotor at 3 (C) or 9 Oclock (G) Position

Fig. 2

OptionalMounting Rails

Horizontal Ceiling HungMotor at 3 (C) or 9 Oclock (G) Position

Fig. 4

OptionalMounting Rails

Horizontal Ceiling HungFig. 3

52 F A N S

Model TDI direct drive tube axial fans are best suited for applications moving relatively clean, dry and cool air in commercial and industrial applications.

APPLICATIONSClean Air Fume Exhaust Spark Resistant Construction

PERFORMANCECapacities range from 2,100 cfm to 48,400 cfm and up to 0.875 in. wg of static pressure.

TBI-CA STANDARD PERFORMANCE & DIMENSIONAL DATA

Model TBI-CA belt drive is a good selection where the motor must be mounted out of the airstream. Used with temperatures up to 200F or contaminated air. Three levels of construction available.

APPLICATIONSClean Air Fume Exhaust Spark Resistant Construction

PERFORMANCECapacities range from 800 cfm to 96,000 cfm and up to 3.25 in. wg of static pressure.

Model TBI-FS belt drive fans have motors out of the airstream. They are a good choice for clean or contaminated airstreams with temperatures up to 400 F. Three levels of construction available.

APPLICATIONSHigh Temperature Process UL/cUL Emergency Smoke Industrial Space Contaminated Air

PERFORMANCECapacities range from 4,800 cfm to 76,000 cfm and up to 4 in. wg of static pressure.

Greenheck Fan Corporation certifies that the TDI & TBI-CA models shown herein are licensed to bear the AMCA Seal. The ratings shown are based on tests and procedures performed in accordance with AMCA Publication 211 and comply with the requirements of the AMCA Certified Ratings Program.

TDI STANDARD PERFORMANCE & DIMENSIONAL DATA

All dimensions in inches.Performance certified is for installation type D: Ducted inlet, Ducted outlet. Performance ratings do not include the effects of appurtenances (accessories).

All dimensions in inches.Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP/kW) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).

Charts shown are for level 3 performance. For complete performance ratings for levels 3, 4 & 5, refer to the CAPS program or to catalogs Model TDI TBI-CA level 3 and Model TBI-CA level 4 & 5, or contact your local representative.

MODEL A (I.D.) B (O.D.) C (B.C) D MIN/MAXRPM PERFORMANCE IN INCHES WG

0 .125 .25 .5 .75 .875

TDI-3-18 183/8 211/16 19 18 1140 4190 3773 31891725 5873 5657 5417 4749 3919

TDI-3-20 203/8 231/16 21 19 1140 5336 4946 44541725 7018 6683 6355 5594 4443

TDI-3-24 243/8 271/16 25 19860 6215 5391 43131140 9028 8399 76671725 12599 12226 11837 10922 9919 9380

TDI-3-30 303/8 339/16 32 21860 12478 11175 96591140 15600 14763 13793 114941725 20634 19895 19175 17718 15819 14739

TDI-3-36 363/8 399/16 38 21860 21839 20153 182361140 26098 24952 23760 21096 179681725 33394 32488 31582 29765 27577 26395

TDI-3-42 42 45 443/16 27680 24214 21392 18362860 27070 25358 23243 178501140 40594 39128 37338 34109 29879 25360

TDI-3-48 48 52 50 27680 32194 28973 24774860 38105 35525 32712 258511140 48408 46588 44919 41349 35525 32815

MODEL A (I.D.) B (O.D.) C (B.C) D E MIN/MAX RPMPERFORMANCE IN INCHES WG

.125 .25 .5 .75 1 1.25

TBI-CA-3L18 183/8 215/8 19 22 21 1890 1914 16593000 3225 3103 2825 2427 1868 1253

TBI-CA-3H18 183/8 215/8 19 22 21 1610 2171 19372710 3874 3758 3502 3209 2832

TBI-CA-3H18 183/8 215/8 19 22 21 1189 2698 23312290 5583 5450 5152 4781 4358

TBI-CA-3H20 203/8 235/8 21 22 23 1056 3126 26182225 7186 7032 6673 6234 5761 5483

TBI-CA-3H24 243/8 275/8 25 23 26 977 4931 42231990 10858 10619 10085 9422 8718 7926

TBI-CA-3H30 303/8 335/8 32 24 29 848 7473 64051815 17648 17222 16278 15321 14327 13167

TBI-CA-3H36 363/8 395/8 38 29 33 763 10388 86201710 25929 25301 23973 22609 21122 19364

TBI-CA-3H42 42 45 44 30 37 594 13266 107281326 32585 31815 30334 28652 26506 23892

TBI-CA-3H48 48 52 50 33 40 490 16808 140831024 38804 37720 35371 33046 30421 25718

TBI-CA-3H54 55 59 57 37 47 476 27099 23391910 56134 54567 51229 47707 42975

TBI-CA-3H60 61 65 63 40 50 507 37656 33757970 76735 74906 71249 67412 62911 57746

Tube Axial TDI/TBI-CA/TBI-FS

DAI.D.

Airow

BO.D.

E

C

UBFM DBFMUBCH DBCH

B A

D

C

Optional

BellVane

Axial Fan

Optional Inlet/Outlet

ConeInlet

DH

C

F

GB

EA

56 F A N S

CWTH

CWTAD

CWDB

CWBAD

CCWTH

CCWTAD

CCWDB

CCWBAD

CWBH

CWBAU

CWUB

CWTAU

CCWBH

CCWBAU

CCWUB

CCWTAU

SFB STANDARD CONDENSED PERFORMANCE & DIMENSIONAL DATA

SFD STANDARD CONSTRUCTION FEATURES

HOUSING: Heavy gauge galvanized steel housing with Lock-seam

construction Corrosion resistant fasteners

WHEEL: Forward curved aluminum wheel (Fans with EXP.

motors include: aluminum rub ring, and shaft seal)

OPTIONS AND ACCESSORIES

Vibration isolators Weatherhood Belt guard (Belt Drive) Gravity and motorized dampers - Model WD Shaft seal with aluminum rub ring Inlet and outlet guards Speed controls (Direct Drive) Heat slinger (Belt Drive) Drain connection (Belt Drive) Access doors - Bolted or Hinged (Belt Drive) Flanged inlets or outlets (Belt Drive) Dual drives Extended lube lines (Belt Drive) Stainless steel shaft (Belt Drive) Greenheck coatings (See coatings page 117)

DISCHARGE POSITIONS(Viewed from Drive Side)

SFB STANDARD CONSTRUCTION FEATURES

HOUSING: Heavy gauge steel housing with Lock-seam

construction Unit support angles with prepunched mounting holes Adjustable motor plate Corrosion resistant fasteners Entire unit is phosphatized and coated.

BEARINGS, SHAFT, AND WHEEL: Heavy duty lubricatable, self-aligning ball bearing pillow

blocks Polished, solid steel shafts Forward curved fan wheel

(Fans with EXP. motors include: aluminum inlet cone, aluminum rub ring, and shaft seal)

All dimensions in inches.Performance certified is for installation type B: Free inlet, Ducted outlet. Power rating (BHP) does not include transmission losses. Performance ratings do not include the effects of appurtenances (accessories).

MODEL A B C D E F G H MIN/MAXCFM PERFORMANCE IN INCHES WG

.125 .5 .875 1.5 2 2.5

SFB-9 20 24 165/8 14 115/16 65/8 10 13 300 4721400 1282 1422 1552 1797 1969

SFB-10 22 265/8 193/8 167/8 12 8 11 151/8 700 450 7182300 1080 1211 1335 1518 1644

SFB-12 22 283/8 213/8 167/8 12 9 13 151/8 900 373 6132900 880 979 1087 1255

SFB-15 275/8 31 233/8 187/8 13 12 153/8 165/8 1600 326 5114200 658 761 858 1000 1098 1186

SFB-18 367/8 42 307/8 25 18 17 19 223/8 2400 285 4546600 607 693 770 888 976

SFB-20 37 46 335/8 273/8 19 157/8 211/8 24 3100 263 3987900 549 617 680 778 851 919

SFB-22 395/8 52 36 30 20 17 23 28 4000 241 359 44710000 508 562 617 703 772 832

SFB-25 41 57 403/8 335/8 197/8 19 257/8 31 5800 205 308 38713800 410 460 508 587 646 699

SFB-27 46 611/8 44 375/8 22 213/8 28 33 9000 225 302 370 46417000 387 431 473 539 592 641

SFB-30 48 68 48 411/8 22 233/8 31 365/8 10400 225 297 355 437 49420000 398 437 476 539 585 626

Centrifugal Utility Fans - SFD/SFB

AE

F

G

C

D

B

H

58 F A N S

STANDARD CONSTRUCTION FEATURES

OPTIONS AND ACCESSORIES

Model SWB Arrangement 10, single width, backward inclined, utility fans feature:

INLET CONESThe streamlined inlet cone design provides a low turbulence air intake. This reduces intake losses and sound levels.

HOUSINGUtility fan housings are constructed of heavy gauge steel. Series 100 housings are constructed from galvanized steel. Series 200 fans are constructed of steel and are coated with Permatector. They are available in CW or CCW rotation and are field rotatable to the eight standard discharge positions. Housing sides are bonded to the fan scroll with an airtight lock seam.

HOUSING SUPPORTS AND DRIVE FRAMEHousing supports are constructed of structural steel with formed flanges for extra strength. Rugged welded steel drive frame members support the shaft and bearings and provide rigid reinforcement for the housing. A pivoting motor plate with adjusting screws make belt tensioning a quick and easy operation. Prepunched mounting holes are provided for ease of installation.

FINISHAll structural steel parts are phosphatized and coated with Greenhecks Permatector for a long lasting finish.

WHEELSBackward inclined wheels are constructed of heavy gauge, single thickness blades securely riveted or welded to a heavy gauge backplate and wheel cone. Each wheel is statically and dynamically balanced to precise tolerances.

DRIVESDrives are sized for a minimum of 150% of driven horsepower. Machined cast iron motor pulleys are factory set to the required RPM and adjustable for final system balancing.

MOTORSHeavy duty ball bearing motors are carefully matched to the fan load. Open drip proof, totally enclosed and explosion proof enclosures are available.

SHAFTS AND BEARINGSPrecision turned, ground and polished solid steel shafts are sized so the first critical speed is at least 25% over the maximum operating speed. Stainless steel shafts are available on Series 200 SWBs. Heavy duty, self aligning pillow block ball bearings are selected for a minimum L50 life in excess of 200,000 hours at maximum cataloged operating conditions.

SWB 100 SWB 200 STANDARD FEATURES

HOUSING: Heavy gauge steel housing with lock formed seams

Unit support angles with prepunched mounting holes Adjustable motor plate

Corrosion resistant fasteners

Slip Fit Outlet

BEARINGS, SHAFT AND WHEEL:Heavy duty lubricatable, self-aligning ball bearing pillow blocks

Polished, solid steel shafts

Backward inclined steel wheel*

Backward inclined aluminum wheels

SWB 100 SWB 200 OPTIONS AND ACCESSORIES

Vibrations Isolators

Weatherhood

Belt Guard

Gravity and Motorized Dampers - Model WD (In Stock)

External Inlet Vane Damper & Companion Flange Shaft Seal with Aluminum Rub Ring

Inlet and Outlet Guards

Heat Slinger

Drain Connection

Access Doors - Bolted

Access Doors - Hinged

Flanged Inlets or Outlets

Dual Drives

STD Aluminum Wheel

UL/cUL 705 Electrical with Weatherhood

qd volume 22 october 2006

Documents

g models

catalog model g

performance ratings

amca certified ratings

sone ratings

performance certified

amca publication

amca certified ratings