QEC initiates SA through the dean one semester prior to

the assessment

Department forms the PT that will be responsible for

preparing SAR

QEC reviews the Documentation within one

month

SAR Complete

The Vice Chancellor / Rector forms the AT in consultation

with the concerned dean based on the recommendation

of the QEC

YES

NO

Fig. 1 Self Assessment Procedure

QEC plans and visit the concerned department

The AT conducts assessment and presents its findings to

QEC, Dean, PT and dept. faculty

The QEC submits an executive summary to the Vice Chancellor / Rector

Department prepares implementation plan as in

table A.2

Follow up of the implementation plan by QEC

Legend· QEC: Quality Assurance Committee· PT: Program Team· SA: Self Assessment· SAR: Self Assessment Report

SELF ASSESSMENT CRITERIA

1. Program Mission Objectives and Outcomes2. Curriculum Design and Organization3. Laboratories and Computing Facilities4. Student Support and Guidance5. Faculty6. Process Control7. Institutional Facilities8. Institutional Support

Criterion-1: Program Mission, Objectives & Outcomes

Intent: Each program must have a mission, quantifiable measurable objectives and expected outcomes for graduates. Outcomes include competency and tasks graduates are expected to perform after completing the program.

Criterion-2: Curriculum Design & Organization

Intent: The curriculum must be designed and organized to achieve the program’s objectives and outcomes. Also course objectives must be in line with program outcomes. Curriculum standards are specified in terms of credit hours of study. A semester credit hour equals one class hour or two to three laboratory hours per week. The semester is approximately of fifteen weeks.

Criterion-3: Laboratories & Computing Facilities

Intent: Laboratories and computing facilities must be adequately available and accessible to faculty members and students to support teaching and research activities. In addition departments may benchmark with similar departments in reputable institutions to identify their shortcomings if any.

Criterion-4: Student Support & Advising

Intent: Student must have an adequate support to complete the program in a timely manner and must have ample opportunity to interact with their instructors and receive timely advice about program requirements and career alternatives.

Criterion-5: Process Control

Intent: The processes by which major functions are delivered must be in place, controlled, periodically reviewed and continuously improved. To meet this criterion a set of standards must be satisfied.

Criterion-6: Faculty

Intent: Faculty members must be current and active in their discipline and have the necessary technical depth and breadth to support the program. There must be enough faculty members to provide continuity and stability, to cover the curriculum adequately and effectively, and to allow for scholarly activities.

Criterion-7: Institutional Facilities

Intent: Institutional facilities, including library, computing facilities, classrooms and offices must be adequate to support the objective of the program.

Criterion-8: Institutional Support

Intent: The institution’s support and the financial resources for the program must be sufficient to provide an environment in which the program can achieve its objectives and retain its strength.

REVIEW

Meeting for Expediting Self Assessment Activities of Faculty of Engineering & Technology held on 20-12-2010 (Monday) in the committee room Faculty of Engineering & Technology, University of the Punjab.

PROGRESS:

Follow up with the Faculty of Engineering & Technology for the submission of their SARs is done but response rate from some departments is very slow and dismal.

10

Latest Status of Faculty of Engineering & Technology

Department Program Teams SAR received

Sent back

for changes

SAR received after improvement

Audit completed

Executive Summary

Implementation Plan

Institute of Chemical Engineering & Technology

√ Dr. Syed Nadir Hussain

(Team Leader)

Dr. Amir ShafiqDr. Hafiz Muhammad

Anwar AsgharDr. Arshad Mehmood

AliEngr. Bilal Haider

√ √ √ √ √ √

Institute of Quality & Technology Management

√

Dr. Nasir Saeed Butt

Dr. M. Usman Awan

Ms. Faryal Jalil

Ms. Sana Hassan

√ √ √ √ √ √

Department of Metallurgy & Materials Engineering

√

Prof. Dr. Abdus Salam Dr. M. Kamran

√ √ √ √ √ √

11

Latest Status of Faculty of Engineering & Technology

Department Program Teams SAR received

Sent back

for changes

SAR received after improvement

Audit completed

Executive Summary

Implementation Plan

Department of Electrical Engineering

√

Mr. Murad Habib

Mr. Zeeshan Azmat

x x x x x x

Centre for Coal Technology

√

Mr. Khurram Shahzad

Ms. Sumaira Kanwal

√ √ √ √ √ √

Department of Polymer Engineering & Technology

x x x x x x x

Department of Textile Engineering & Technology

x x x x x x x

SURVEY FORMS

Teacher & Course Evaluation FormProforma - 1 Student Course Evaluation QuestionnaireProforma - 2 Faculty Course Review ReportProforma - 3 Survey of Graduating StudentsProforma - 4 Research Student Progress Review FormProforma - 5 Faculty SurveyProforma - 6 Survey of Department Offering Ph.D. ProgramsProforma - 7 Alumni SurveyProforma - 8 Employer SurveyProforma - 9 Faculty ResumeProforma - 10 Teacher Evaluation FormTeaching / Learning Process Survey Form

TEACHERS & COURSES EVALUATION

In order to enhance the quality of education, QEC has already circulated newly developed survey forms related to the teachers and courses evaluation.

HODs will interact & coordinate with QEC staff to conduct survey at the end of each semester and also bring any change if required.

Assessment is a Continuous Improvement

THANK YOU