qualification required

8.1 Qualifications & Required Experience Levels for QC Services

8.1.1 MINIMUM REQUIREMENTS FOR QA/QC COORDINATOR

Wide range of experience in multi-disciplined teams with experience in the oil & gas construction industryQualifications/Certifications:HND/B. Eng/ B.Sc in an Engineering discipline;Any or a combination of two of the following certifications:API 510, API 570, API 576, CSWIP 3.2, CSWIP 3.1 Certified InspectorMinimum PCN Level II or SCN-ASNT Level II (Radiographic Interpretation, Ultrasonic Inspection, Dye Penetrant Inspection, Magnetic Particle Inspection)Conversant with requirements of ASME V; ASME VIII & IX and API;Fully conversant with SPDC SCS & DEPs;COREN and/or NSE registered Engineer;Electrical Wiring Installation License (EWIL) Federal Ministry of Power & Steel (for Electrical discipline); HUET;Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access15 (inspection and auditing), 10 years of which must be in Senior QA/QC position. Excellent communicative skills are a prerequisite (as personnel will be required to offer advice to their contemporaries within the EPC contractors organization and professional advice to inspectors and supervisors)Essential to be able to read, fluently speak and write in the English

8.1.2MINIMUM REQUIREMENTS FOR SENIOR QUALITY CONTROL ENGINEERS(Mechanical, Electrical, Instrumentation, Rotating Equipment, Static Equipment & Civil)Wide range of experience in multi-disciplined teams with experience in the oil & gas construction industry (preferably in Nigeria)10 years cognate experience (Inspecting and auditing), at least 5 years of which must be in a Senior QA/QC position.Ability to operate in harsh and remote locations;Experienced in the installation of major equipment on Gas Plant and Flow stations is essential, preferably in Nigeria;Sound working knowledge of the supplied equipment and the national/international standards associated to themQualifications/certifications: B. Eng/ B.Sc in relevant Engineering disciplineCOREN and/or NSE registered engineer HUETFully conversant with SPDC SCS & DEP'sCommunicative skills are a prerequisite, as personnel will be required to offer advice to their contemporaries within the EPC contractors organization and professional advice to inspectors in the fieldPersonnel should be self-motivated and accustomed to working alone with the minimum supervisionEssential to be able to read, speak and write in the English;Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

Mechanical/Rotating Equipment/Static EquipmentQualified and experienced in operating equipment to be operated e.g. Thermal imaging camera and software; leak detection equipment; heat exchanger tube eddy current inspection equipment, etcAny or a combination of two of the following certifications:API 510, API 570, API 576, CSWIP 3.1, 3.0 or AWS CertificationMinimum PCN Level II or SCN-ASNT Level II (Radiographic Interpretation, Ultrasonic Inspection, Dye Penetrant Inspection, Magnetic Particle Inspection)Conversant with requirements of ASME V, VIII & IX;

CivilCompetency Enhancement Certifications such as: NSE Civil Inspection Competency Certification and/or TWI Civil Inspection Competency Certification

ElectricalAny or a combination of the following certifications:Electrical Wiring Installation License (EWIL) Federal Ministry of Power & SteelTWI Electrical/Instrument Quality Assurance certificationTWI Electrical/Instrumentation Digital Programming certificationTWI Electrical/Instrumentation Safety & Protection certification

Instrumentation

SPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.Minimum 5 years in the oil and gas industry in the area of construction, commissioning and maintenance of process instruments.TWI Electrical/Instrumentation Digital Programming certification or its equivalentFamiliarity with instrument and systems installation requirements including control and actuated valves, small bore piping/fittings and compression tubing/fittings installation and testing.

8.1.3MINIMUM REQUIREMENTS FOR QUALITY CONTROL ENGINEER(Mechanical, Electrical, Instrumentation, Rotating Equipment, Static Equipment , Civil)Qualification/Certifications:B. Eng/ B.Sc in relevant Engineering discipline; Fully conversant with SPDC SCS & DEP'sHUETNSE membership shall be an added advantage (QC Engineer I & II)3 years working experience in an audit team will be an added experienceSound working knowledge of SPDC and national/international standards associated with construction in Oil & Gas industryAbility to produce clear sketches and isometric drawings Working Experience:QC Engineer I: above 7 years relevant QA/QC experience in the preparation and execution of QC documents (in Nigeria)QC Engineer II: 5 to 7 years relevant QA/QC experience in the preparation and execution of QC documents (in Nigeria)QC Engineer III: 0 - 5 years relevant QA/QC experience in the preparation and execution of QC documents (in Nigeria) Graduate membership of NSE shall be an added advantage.

Mechanical/Rotating Equipment/Static EquipmentQualified and experienced in operating equipment to be operated e.g. Thermal imaging camera and software; leak detection equipment; heat exchanger tube eddy current inspection equipment, etcAny or a combination of two of the following certifications: API 510 or API 570 or API 576; CSWIP 3.1 or 3.0 or AWS CertificationPCN Level II or SCN-ASNT Level II (Radiographic Interpretation, Ultrasonic Inspection, Dye Penetrant Inspection, Magnetic Particle Inspection)Conversant with requirements of ASME V, VIII & IX;

CivilCompetency Enhancement Certifications such as: NSE Civil Inspection Competency Certification TWI Civil Inspection Competency Certification


Instrumentation

HND/B.Sc/B.Eng in Automation and Control or equivalent qualificationsSPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.Minimum 5 years in the oil and gas industry in the area of construction, commissioning and maintenance of process instruments.TWI Electrical/Instrumentation Digital Programming certificationFamiliarity with instrument and systems installation requirements including control and actuated valves, small bore piping/fittings and compression tubing/fittings installation and testing.

8.1.4MINIMUM REQUIREMENTS FOR SENIOR MECHANICAL/ WELDING, ROTATING EQUIPMENT, SENIOR ELECTRICAL/INSTRUMENTATION AND SENIOR CIVIL INSPECTOR (EXPATRIATE)Wide range of experience in multi-disciplined teams with experience in the oil & gas construction industry, preferably in Nigeria;The ability to operate in harsh and remote locations;Experience in the installation of major equipment on Gas Plant and Flow stations is essential, preferably in Nigeria;Sound working knowledge of the supplied equipment and the national/international standards associated to themEducated to HND/HNC/B. Eng/ B.Sc. in relevant Engineering disciplinePTI HND in Welding & FabricationAPI 510 or API 570 or API 576CSWIP 3.1 or AWS CertificationPCN Level II or SCN-ASNT Level II (RT, UT, DP, UT)Conversant with requirements of ASME V, VIII & IXConversant with material and NDT testing techniquesFully conversant with SPDC SCS & DEP'sElectrical Wiring Installation License (EWIL)HUET10 years experience in overseeing quality assurance and quality control activities, at least 5 years of which must be in a senior inspection/testing capacity in the Oil and Gas industryCommunicative skills are a prerequisite, as personnel will be required to offer advice to their contemporaries within the EPC contractors organization and professional advice to inspectors in the fieldPersonnel should be self-motivated and accustomed to working alone with the minimum of supervisionAbility to produce clear sketches and isometric drawings Essential to be able to fluently speak, read and write in English languageHave received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

Mechanical/Rotating Equipment/Static EquipmentQualified and experienced in operating equipment to be operated e.g. Thermal imaging camera and software; leak detection equipment; heat exchanger tube eddy current inspection equipment, etcAny or a combination of two of the following certifications: API 510 or API 570 or API 576; CSWIP 3.1 or 3.0 or AWS CertificationPCN Level II or SCN-ASNT Level II (Radiographic Interpretation, Ultrasonic Inspection, Dye Penetrant Inspection, Magnetic Particle Inspection)Conversant with requirements of ASME V, VIII & IX;



Instrumentation

HND/B.Sc/B.Eng in Automation and Control (Mechatronics) or equivalent qualificationsSPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.Minimum 5 years in the oil and gas industry in the area of construction, commissioning and maintenance of process instruments.TWI Electrical/Instrumentation Digital Programming certificationFamiliarity with instrument and systems installation requirements including control and actuated valves, small bore piping/fittings and compression tubing/fittings installation and testing.

8.1.5MINIMUM REQUIREMENTS FOR SENIOR SITE INSPECTORS (Indigenous)(Civil, Mechanical, Welding, Electrical & Instrumentation)

Educated to HND and or B.Sc degree in the relevant engineering disciplinePTI HND in Welding & FabricationHave a detailed understanding of SHELL Procedures And DEPsSound knowledge of Risk Based Inspection methodologyMinimum 10 Years experience, 5 of which must be at a senior inspection/testing capacityFully conversant with SPDC SCS & DEP'sConversant with material and NDT testing techniquesHUETNSE and AWS membership shall be an added advantage.Proven Ability to work UnsupervisedProven Organization SkillsProven Interpersonal Communication SkillsProven Reporting SkillsProven Planning Skills and Man management Skills (inspection activities)Extensive Experience at various work faces, Offshore, Swamp, Refinery, Etc.Familiar with SHELL Permit to Work SystemFamiliar with and understand the concept of ISO 9001 2000Have received training and be fully literate in the following software applications (added advantage):Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

Mechanical / Welding / Rotating Equipment/Static EquipmentQualified and experienced in operating equipment to be operated e.g. Thermal imaging camera and software; leak detection equipment; heat exchanger tube eddy current inspection equipment, etcAny or a combination of two of the following: API 510 or API 570 or API 576; CSWIP 3.1 or 3.0 or AWS CertificationPCN Level II or SCN-ASNT Level II (Radiographic Interpretation, Ultrasonic Inspection, Dye Penetrant Inspection, Magnetic Particle Inspection)Conversant with requirements of ASME V, VIII & IX;


ElectricalElectrical Wiring Installation License (EWIL) Federal Ministry of Power & SteelTWI Electrical/Instrument Quality Assurance certificationTWI Electrical/Instrumentation Safety & Protection certification

InstrumentationTWI Electrical/Instrument Quality Assurance certificationTWI Electrical/Instrumentation Digital Programming certificationTWI Electrical/Instrumentation Safety & Protection certification

SPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.Familiarity with instrument and systems installation requirements including control and actuated valves, small bore piping/fittings and compression tubing/fittings installation and testing.TWI Electrical/Instrument Quality Assurance certificationTWI Electrical/Instrumentation Digital Programming certificationTWI Electrical/Instrumentation Safety & Protection certification

8.1.6MINIMUM REQUIREMENTS FOR SITE INSPECTORS (INDIGENOUS)(Civil, Mechanical, Welding, Electrical/Instrumentation, NDT, Coating, etc)B.Sc/B.Eng/HND in the relevant engineering disciplineFully conversant with SPDC SCS & DEP'sHUETNSE membership shall be an added advantageMinimum 5 years cognate & relevant working experienceProven Ability to work with minimum supervisionProven interpersonal and written communication skillsProven reporting and job planning skillsExtensive experience at various work faces, Off shore , Swamp, Refinery EtcFamiliar with SHELL permit to work SystemFamiliar with and understand the concept of ISO 9001 2000Have received training and be fully literate in the following software applications (added advantage):Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft Excel

Site Inspector Level 3: 8 years cognate experienceSite Inspector Level 2: 5 years cognate experienceSite Inspector Level 1: 0 - 3 years cognate experience.

Mechanical/Welding HND/B.Sc. in Mechanical or related engineering disciplinePTI HND in Welding & fabrication from CSWIP 3.0 and/or any other certification relevant to the applicable discipline shall be an added advantageConversant with requirements of ASME V, VIII & IXComprehensive knowledge of mechanical equipment eg, pumps, motors, generators, valves, actuators, cranes, etcSound knowledge of NDT techniques and hydrostatic testingAbility to line-up mechanical equipment

ElectricalHND/B.Sc/B.Eng in Electrical/Electronic engineeringElectrical Wiring Installation License (EWIL) Federal Ministr of Power & SteelSPDC approved specialist training in installation and maintenance of electrical equipment in hazardous and potentially explosive environmentsElectrical/Instrumentation Safety & Protection certification

InstrumentationHND/B.Sc/B.Eng in Automation and Control or equivalent qualificationsSPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.Electrical/Instrumentation Safety & Protection certificationFamiliarity with instrument and systems installation requirements including control and actuated valves, small bore piping/fittings and compression tubing/fittings installation and testing.

CIVIL/ BUILDING INSPECTORMinimum HND in Civil Engineering or equivalent qualifications.In-depth knowledge of materials testing methods and preparation of quality documentation.SPDC approved specialist training

For Civil Infrastructures Roads & Bridges: Minimum 5 years inspection experience in oil and gas construction, laboratory and field testing. Experience to include civil/ building industry (foundations, structures, roads, buildings, etc.).

For Building/Structural: Minimum 5 years inspection/supervision experience of new building and building modification works, and familiarity with codes, standards and practices relating to building construction & modifications including architectural finishing.

8.1.7MINIMUM REQUIREMENTS FOR ROPE ACCESS INSPECTOR

Minimum 5 years in the oil and gas industry in Abseiler works (Level I 5 years; Level II 7 years; Level III 10 years); HND graduate from a recognized higher institutionIRATA Level 3 qualificationConverrsant with material testing and NDT techniquesConversant with relevant SPDC SCS & DEP's In-depth experience on working at height.Training and literacy in the following software applications shall be an added advantage:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessLevel I - 10 years in the oil and gas industry in Abseiler works;Level II - 7 yearsLevel III 5 years

8.1.8MINIMUM REQUIREMENTS FOR SENIOR PAINTING/ COATING INSPECTOR

NACE L II/III with peer review or B.Gas grade 1 (Contractors shall appoint a Snr. Paint Inspector when more than 1 inspector is required)HND/B.Sc in Chemical/Petrochemical EngineeringConversant with relevant ASME requirementsFully conversant with SPDC SCS & DEP's10 years in the oil and gas industry in painting, 5 of which shall be at senior inspection/auditing capacityHave received training and be fully literate in the following software applications (added advantage):Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.9MINIMUM REQUIREMENTS FOR PAINTING/ COATING INSPECTOR

Minimum NACE L II or B.Gas grade 2HND/B.Sc in Chemical/Petrochemical EngineeringConversant with relevant ASME requirementsConversant with SPDC SCS & DEP's5 years cognate coal-face project site painting inspection/testing experience.Have received training and be fully literate in the following software applications (added advantage):Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.10MINIMUM REQUIREMENTS FOR SENIOR MATERIALS INSPECTOR

Graduate from a recognized University/Polytechnic or PTI to B.Sc or HND levelConversant with relevant ASTM material specifications, material testing and NDT techniques Conversant with relevant SPDC SCS & DEP'sExperienced in Goods Inward Inspection practices.Sound knowledge of MESC systemHave received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessQualified as a minimum in accordance with the related discipline respective to the works, as follows:-

MECHANICAL:

Minimum HND/B.Sc in Mechanical Engineering or related disciplineGood working knowledge of mechanical equipment eg, pumps, motors, generators, valves, actuators, cranes, etcComprehensive knowledge of piping and flange specifications and preservation methods.Sound knowledge of ASTM material specifications, mechanical testing requirements and NDT techniques.Minimum of 10 Years in mechanical inspection / surveillance in vendors.

ELECTRICAL

Minimum HND/B.Sc in Electrical/Electronic engineeringElectrical Wiring Installation License (EWIL) Federal Ministry of Power & SteelElectrical/Instrumentation Safety & Protection certificationSPDC approved specialist training in installation and maintenance of electrical equipment in hazardous and potentially explosive environmentsMinimum of 10 years in the oil and gas industry in the area of electrical construction, commissioning and maintenance of certified electrical, with 5 years as an electrical inspector at vendors works.

INSTRUMENTS

Minimum HND/B.Sc in Automation and Control or equivalent qualificationsSPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.10 years in the oil and gas industry in the area of construction, commissioning and maintenance of process instruments, with 5 years as an instrument inspector at vendors works.

8.1.11MINIMUM REQUIREMENTS FOR MATERIALS INSPECTOR

Graduate from a recognized University/Polytechnic to B.Sc/HND levelConversant with relevant ASTM material specifications, material testing and NDT techniques Conversant with relevant SPDC SCS & DEP'sExperienced in Goods Inward Inspection practices.Sound knowledge of MESC systemHave received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessQualified as a minimum in accordance with the related discipline respective to the works, as follows:-

MECHANICAL

Minimum HND/B.Sc in Mechanical Engineering or related disciplineComprehensive knowledge of mechanical equipment for the oil & gas industry eg, pumps, motors, generators, valves, actuators, cranes, etcExtensive knowledge of piping & piping components and material specifications.Minimum of 5 Years in mechanical inspection / surveillance in vendors.

ELECTRICAL

Minimum HND/B.Sc in Electrical/Electronic engineeringSPDC approved specialist training in installation and maintenance of electrical equipment in hazardous and potentially explosive environmentsMinimum of 5 years in the oil and gas industry in the area of electrical construction, commissioning and maintenance of certified electrical works.

INSTRUMENTS

Minimum HND/B.Sc in Automation and Control or equivalent qualificationsSPDC approved specialist training in installation and maintenance of process instrument in hazardous and potentially explosive environments.Minimum 5 years in the oil and gas industry in the area of construction, commissioning and maintenance of process instruments.Familiarity with instrument and systems installation requirements including control and actuated valves, small bore piping/fittings and compression tubing/fittings installation and testing.

8.1.12MINIMUM REQUIREMENTS FOR SENIOR CONSTRUCTION SUPERVISOR(Mechanical, Civil, Electrical, Instrumentation, etc)

HND or equivalent degree in relevant Engineering discipline (B.Sc/B.Eng shall be an added advantage); professional certifications shall apply as per the relevant disciplinesAny or a combination of the following certifications - API 510 or API 570 or API 576 and/or CSWIP 3.1 or AWS CertificationPCN Level II or SCN-ASNT Level II (RT, UT, MP, DP)Conversant with requirements of ASME V, VIII & IXConversant with SPDC SCS & DEP'sElectrical Wiring Installation License (EWIL) Federal Ministry of Power & SteelSound knowledge of construction materials selectionHUETAny other applicable SPDC approved specialist training certification.10 years experience in overseeing construction quality assurance and quality control activities, 5 years of which must be at a senior inspection/testing capacityWide range of experience in multi disciplined teams with experience in Oil and Gas Construction works, preferably in Nigeria.The ability to operate in harsh and remote locationsCommunicative skills are a prerequisite as personnel will be required to offer advice to their contemporaries and professional advice to inspectors in the fieldNSE membership shall be an added advantageHave received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.13 MINIMUM REQUIREMENTS OF CONSTRUCTION SUPERVISOR

(Mechanical, Civil, Electrical/Instrumentation and Chemical)

HND or equivalent degree in relevant Engineering disciplineCSWIP 3.0 (added advantage)Conversant with requirements of ASME V, VIII & IXConversant with SPDC SCS & DEP'sElectrical Wiring Installation License (EWIL) Federal Ministry of Power & SteelHUETAbility to operate in harsh and remote locationsWide range of experience in multi disciplined teams with experience in Oil and Gas Construction works, preferably in NigeriaPersonnel should be self-motivated and accustomed to working alone with as much as possible minimum supervisionEssential to be able to fluently read, speak and write in the EnglishHave received training and be fully literate in the following software applications (added advantage)Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

Working experience:

Construction Supervisor I 5 years and aboveConstruction Supervisor II < 5 years 8.1.14MINIMUM REQUIREMENTS SENIOR QUALITY ASSURANCE ENGINEER

Wide range of experience in multi-disciplined teams with experience in the oil & gas construction industry (preferably in Nigeria)10 years cognate experience (Inspecting and Auditing), at least 5 years of which must be in a Senior QA/QC position.Qualified and experienced in operating equipment to be operated e.g. Thermal imaging camera and software; leak detection equipment; heat exchanger tube eddy current inspection equipment, etcThe ability to operate in harsh and remote locations;Experience in the installation of major equipment on Gas Plant and Flow stations is essential, preferably in Nigeria;Sound working knowledge of the supplied equipment and the national/international standards associated to themEducational Qualifications / Professional certifications relevant per discipline: B. Eng/ B.Sc in relevant Engineering disciplineCOREN and/or NSE registered engineerAny or a combination of the following certifications: API 510 or API 570 or API 576; CSWIP 3.1 or AWS CertificationPCN Level II or SCN-ASNT Level II (Radiographic Interpretation) and other NDT methodsConversant with requirements of ASME V, VIII & IX; Fully conversant with SPDC SCS & DEP'sElectrical Wiring Installation License (EWIL) Federal Ministry of Power & SteelHUETGood co-ordinating and communicative skills are a prerequisite, as the Senior Quality Assurance Engineer will be required to relate technical issues arising from scheduled audits to SHELL management and technical personnel and to the EPC contractor personnel. Should be self-motivated and accustomed to working alone with minimum supervisionMust be fluent in reading, speaking and writing in English languageHave received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessPersonnel should be self-motivated and accustomed to working alone with the minimum of supervision;IRCA Lead assessor qualifications for the Senior QA Engineers positions;

8.1.15MINIMUM REQUIREMENTS QUALITY ASSURANCE ENGINEER(Mechanical, Electrical, Instrumentation, Rotating Equipment, Static Equipment Civil, Coating, Cathodic Protection etc.)Qualifications/Certifications:B. Eng/ B.Sc in relevant Engineering discipline; HUETNSE membership shall be an added advantage (QA Engineer I & II)Electrical Wiring Installation License (EWIL) Federal Ministry of Power & Steel3 years working experience in an audit team will be an added experienceSound working knowledge of SPDC and national/international standards associated with construction in Oil & Gas industryMulti-disciplined with up to 7 years experience in the oil & gas construction industry and experience in Nigeria;The ability to operate in harsh and remote locations;Wide range of experience in monitoring manufacturing and construction processes particularly for the oil and gas industry;Experience in the installation of major equipment on Gas Plant and Flow stations is essential.Sound working knowledge of the national/international standards associated with construction activities in Oil and Gas plants;Personnel should be self-motivated and accustomed to working alone with the minimum of supervision;Possession of Quality Auditors certifications shall be an added advantage.Essential to be able to fluently read, write and speak English language

Working Experience:

QC Engineer I: 7- 10 years relevant QA/QC experience in the preparation and execution of QA/QC documents (in Nigeria)QC Engineer II: 5 - 7 years relevant QA/QC experience in the preparation and execution of QA/QC documents (in Nigeria)QC Engineer III: 0 - 5 years relevant QA/QC experience in the preparation and execution of QA/QC documents (in Nigeria) Graduate membership of NSE shall be an added advantage.Have received training in and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessMicrosoft Power point version 4

8.1.16MINIMUM REQUIREMENTS CORROSION ENGINEERHND/B.Sc or equivalent in Chemical/Petrochemical Engineering, Metallurgy or Materials Science and must have achieved a professionally recognised qualification. NACE Level II or B.Gas Grade 2Conversant with relevant ASME requirementsFully conversant with SPDC SCS & DEP's5 years experience in the oil & gas construction industry experience in NigeriaAbility to operate in harsh and remote locationsWide range of experience in monitoring manufacturing and construction processes particularly for the oil and gas industry;Experience in the installation of major equipment on Gas Plant and Flow stations.Sound working knowledge of the national/international standards associated with the welding & corrosion of oil and gas plantsExperience in working with Cathodic Protection Systems, corrosion inhibitors and corrosion control systems. Sound knowledge of Risk Based Inspection methodologySelf-motivated and accustomed to working alone with the minimum of supervisionFluency in speaking, reading and writing in English languageHave received training in and be fully literate in the following software applications (added advantage):Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessMicrosoft Power point version 4

8.1.17 MINIMUM REQUIREMENTS FOR RADIATION PROTECTION ADVISOR

The RPA representative shall be either based in the Contractors Port Harcourt office, or placed on a retainer or a consultancy basis. He shall be formally appointed in writing with his roles and responsibilities clearly defined.HND/B.Sc. degree in Engineering, Physics or Health SciencesMust have detailed understanding of IRR99 and its ACOPConversant with current NNRA RegulationsRadiation protection experience associated with Industrial Radiography of not less than 7 years, 5 years of which shall be as Radiation Protection Supervisor RPSPCN, CSWIP, ACCP, EN-473 ASNT SNT-TC-1A level 2 in radiography, including interpreting and applying radiation protection dataHold a valid certificate of core competence from an organization recognised as an Assessing Body for RPA purposes Sound knowledge of general methods which might be typically used to deal with operational problemsSupervising or carrying out practical measurements and control procedures for work involving potential for significant exposure to radiation.The ability to advise management effectively on the implementation of relevant regulatory requirements and radiation protection practices for work involving potential for significant exposure to radiation.Personnel should be self-motivated and accustomed to working alone with the minimum of supervision.Minimum 7 years in similar radiological work i.e. as a radiographer, 5 of which must be as Radiation Protection Supervisor RPS.Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.18MINIMUM REQUIREMENTS FOR RADIATION PROTECTION SUPERVISOR (RPS)OND or HND/B.Sc or equivalent in Engineering, Physics or Health Sciences10 years experience in the oil & gas construction industry and experience in Nigeria.Registered as classified personUndergone special classified person medical by the appointed DoctorThe ability to operate in harsh and remote locations;Sound working knowledge of the national/international standards associated with the construction of oil and gas plants;Sound working knowledge of SHELLS standards;Qualified to PCN, CSWIP, ACCP, EN-473 ASNT SNT-TC-1A level 2 in radiography;Qualified by NRPB / equivalent or In accordance with the Provisions of the Ionizing Radiation Regulations 1999 SI 3232 and ha held RPS position for at least two years;Excellent communicative skills are a prerequisite as personnel will be required to offer advice to SHELL management/engineers on radiation protection issues;Personnel should be self-motivated and accustomed to working alone with the minimum of supervision;Essential to be able to read and write in the English language;Have received training in and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessMicrosoft Power point version 4

8.1.19MINIMUM REQUIREMENTS FOR SENIOR RADIOGRAPHEROND or HND or equivalent in Engineering, Physics or Health SciencesASNT L II with safety endorsement for radiation and shall also be qualified in radiographic film interpretation.)10 years in the oil and gas industry in industrial radiography.Have safety endorsement to cover RPS role.Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.20MINIMUM REQUIREMENTS FOR RADIOGRAPHERASNT L II with safety endorsement for radiation. (Personnel required to interpret radiographs shall also require to be qualified in radiographic film interpretation.)Minimum of 3 years in the oil and gas industry in industrial radiography.Present at each site where radiographic work takes place.Be able to produce all radiation dose medical records.Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.21MINIMUM REQUIREMENTS FOR ASSISTANT RADIOGRAPHEROND or HND in Engineering, Physics or Health SciencesWASC with credit passes in Physics, Mathematics and Chemistry with cognate relevant NDT experience of up to 7 years shall also be considered. ASNT Level I with safety endorsement for radiation. (Personnel required to interpret radiographs shall also require to be qualified in radiographic film interpretation.)Assistant qualified on completion of ASNT Level I.Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.22MINIMUM REQUIREMENTS FOR FACILITY STATUTORY (LIFTING EQUIPMENT) INSPECTORHND/B. Eng/ B.Sc in Mechanical Engineering or related disciplineQualified as Competent Inspector Lifting Equipment by the Factories Inspectorate of the Federal Ministry of Labour and Productivity (FID)5 years in Oil & Gas industry in similar QC position.Have received training and is fully literate in the following software applications (added advantage)Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.23MINIMUM REQUIREMENTS FOR SENIOR FACILITY STATUTORY INSPECTORHND/B.Sc in Mechanical Engineering or related disciplineQualified as Competent Inspector for Pressure Vessels and Lifting Equipment by the Factories Inspectorate of the Federal Ministry of Labour and Productivity (FID)API 510 and/or 570Sound knowledge of ASME VIII & BS 5500 Pressure Vessel CodesSound knowledge of Risk-based Inspection methodology10 years in the oil and gas industry in similar QC function.Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.24MINIMUM REQUIREMENTS FOR FACILITY STATUTORY (PRESSURE EQUIPMENT) INSPECTOR LEVEL II and IIIHND in Mechanical Engineering or related disciplineQualified as Competent Inspector for Pressure Vessels by the Factories Inspectorate of the Federal Ministry of Labour and Productivity (FID)API 510 and/or 570Sound knowledge of ASME VIII & BS 5500 Pressure Vessel CodesSound knowledge of Risk-based Inspection methodologyCompetence in carrying out audits of pressure equipment and asset register accuracyUp to 7 years in the oil and gas industry in similar QC function for Level III and 5 years experience for Level II.Have received training and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.25MINIMUM REQUIREMENTS FOR FACILITY STATUTORY (TANK) INSPECTORHND/B.Sc in Mechanical Engineering or related disciplineAPI 653 Certified InspectorCSWIP 3.0, ASNT Level II (UT, MPI, DPI)Conversant with BS 2654 or EEMUA 159 requirementsSound knowledge of Risk-based Inspection methodologyCapable of developing tank inspection procedures10 years experience in the Oil and Gas industry in similar QC function for Level III, 7 years experience for Level II and 5 years for Level I. Have received training and be fully literate in the following software applications (added advantage):Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft Access

8.1.26MINIMUM REQUIREMENTS FOR RELIEF VALVE INSPECTORHND/B. Eng/ B.Sc in Mechanical Engineering or related disciplineQualified as Competent Relief Valve Inspector by the Factories Inspectorate of the Federal Ministry of Labor and Productivity (FID)Minimum of 3 years experience in workshop handling of valves and instrumentation for Oil & Gas industry.Successful completion of competence examination by recognized relief valve manufacturer for conventional spring operated safety valves with and without bellows and pilot-operated safety relief valves for both liquid and gas service.SPDC HUET Pass

8.1.27MINIMUM REQUIREMENTS FOR SENIOR NDT TECHNICIANSOND/HND in Mechanical Engineering or related engineering fieldASNT Level II in NDT methods (MPI, UT, RT, DPI)Qualified to ACCP, EN473, PCN Level II or ASNT SNT-TC-1A Level II)Minimum of 10 years experience encompassing, swamp, offshore and land locations, Lay Barges and refinery Condition Monitoring.

8.1.28MINIMUM REQUIREMENTS FOR NDT TECHNICIANSOND/HND in Mechanical Engineering or related engineering fieldASNT Level II in NDT methods (MPI, UT, RT, DPI)Qualified to ACCP or EN473 or PCN Level II or ASNT SNT-TC-1A Level IITraining & Experience in the operation of radiation leak detection equipmentTraining & Experience in the operation of thermal imaging equipmentMinimum of 5 years (NDT Level II) & up to 3 years (NDT Level I) experience encompassing, swamp, offshore and land locations, lay barge and refinery condition monitoring

8.1.29MINIMUM REQUIREMENTS FOR COMPANY SITE REPRESENTATIVE (CSR)(Mechanical, Electrical, Instrumentation, Rotating Equipment, Static Equipment Civil, Coating, Cathodic Protection etc.)Wide range of experience in multi-disciplined teams with experience in the oil & gas construction industry (preferably in Nigeria)12 years cognate experience (Inspecting and auditing), at least 5 years of which must be in a Senior QA/QC position.Qualified and experienced in operating equipment to be operated e.g. Thermal imaging camera and software; leak detection equipment; heat exchanger tube eddy current inspection equipment, etcThe ability to operate in harsh and remote locations;Experience in the installation of major equipment on Gas Plant and Flow stations is essential, preferably in Nigeria;Sound working knowledge of the supplied equipment and the national/international standards associated to themQualifications/certifications: B. Eng/ B.Sc in relevant Engineering disciplineCOREN and/or NSE registered engineerAPI 510/API 570/API 576; CSWIP 3.1 or AWS CertificationPCN Level II or SCN-ASNT Level II (Radiographic Interpretation) and other NDT methodsConversant with requirements of ASME V, VIII & IX; Fully conversant with SPDC SCS & DEP'sElectrical Wiring Installation License (EWIL)HUETECM 1Communicative skills are a prerequisite, as personnel will be required to offer advice to their contemporaries within the EPC contractors organization and professional advice to inspectors in the fieldPersonnel should be self-motivated and accustomed to working alone with the minimum supervisionEssential to be able to read, speak and write in the English fluentlyHave received training and be fully literate in the following software applications:Microsoft Windows DOS & NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessECM1 Training and a certificate indicating PASSGood co-ordinating and communicative skills are a prerequisite, as the will be required to relate technical issues arising from the supervision of Senior QA/QC Engineers and inspection functions to SHELL management and technical personnel and to the EPC contractorsPersonnel should be self-motivated and accustomed to working alone with the minimum of supervision;

8.1.30MINIMUM REQUIREMENTS FOR SENIOR HSE REPRESENTATIVE/ COORDINATORHND/B.Sc. or equivalent degree from a recognized UniversityNEBOSH, NISP HSE Competency Level III as well as other internationally accredited HSE certificationsMembership of International and Local HSE organisationsECM 1Minimum of 12 years experience in the oil & gas construction industry and experience in Nigeria;The ability to operate with minimum supervision in harsh and remote locations;Sound working knowledge of the national/international HSE standards associated with the construction of oil and gas plants;Sound working knowledge of SHELL HSE standards;Acted as a company HSE representative for at least two years;Excellent communicative skills are a prerequisite as personnel will be required to offer advice to SHELL management/engineers on HSE issues;Essential to be able to read, speak and write in the English fluentlyHave received training in and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessMicrosoft Power point version 4

8.1.31MINIMUM REQUIREMENTS FOR HSE INSPECTORHND/B.Sc. or equivalent degree from a recognized UniversityNEBOSH, NISP HSE Competency Level III as well as other internationally accredited HSE certificationsMembership of International and Local HSE organisations shall be an added advantageECM 13 - 8 years experience in the oil & gas construction industry and experience in Nigeria;The ability to operate in harsh and remote locations;Sound working knowledge of the national/international HSE standards associated with the construction of oil and gas plants;Sound working knowledge of SHELL HSE standards;Excellent communicative skills are a prerequisite, as personnel will be required to offer advice to SHELL management/engineers on HSE issues;Essential to be able to read, speak and write in the English fluentlyHave received training in and be fully literate in the following software applications:Microsoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessMicrosoft Power point version 4

HSE Inspector Level 1 : 8 years cognate experienceHSE Inspector Level 2 : 5 years cognate experienceHSE Inspector Level 3 : 0 - 3 years cognate experience.

8.1.32MINIMUM REQUIREMENTS FOR RIGHT OF WAY (SURVELLIANCE) INSPECTORHND/OND or equivalent degree/certificates from a recognized tertiary institution in Nigeria.NISP HSE Competency Level IIIMembership of local or international HSE organisations shall be an added advantage0 - 5 years experience in the oil & gas Pipeline ROW surveillanceAbility to operate in harsh and remote locationsSound working knowledge of the national/international HSE standards associated with Oil and Gas fieldsSound working knowledge of SHELL HSE standardsGood communicative skill - essential to be able to read, speak and write fluently in English language Knowledgeable in identifying ROW markings and routesComputer literacy shall be an added advantage (but not compulsory)

8.1.33MINIMUM REQUIREMENTS FOR OIL SPILL RESPONSE/REMEDIATION INSPECTORHND/OND or equivalent degree/certificates from a recognized tertiary institution in Nigeria.NISP HSE Competency Level IIIMembership of local and/or international HSE organisations shall be an added advantage0 - 5 years experience in the oil & gas Pipeline ROW surveillance and/or Oil Spill Response (OSR)Ability to operate in harsh and remote locationsSound working knowledge of the national/international HSE standards associated with Oil and Gas fieldsSound working knowledge of SHELL HSE standardsKnowledgeable in the handling of spill containment and recovery equipment Good communicative skill - essential to be able to read, speak and write fluently in English languageKnowledgeable in identifying ROW markings and routesComputer literacy shall be an added advantage (but not compulsory)

8.1.34MINIMUM REQUIREMENTS FOR DOCUMENT CONTROLLERHND or B.Sc./B.A. degree from a recognised UniversityProfessionally recognised qualification in document control or a Library ScienceExcellent communication skill to offer advice to SHELL management/engineers on technical documentation issuesFluent knowledge of latest versions of Microsoft Windows applications - Word, Excel, Access & PowerPointWide range of experience in the Oil and Gas industry on Major projects;5 - 10 years experience, with a minimum of three years managing and operating manual document management systems and electronic document management systemsPersonnel should be self-motivated and accustomed to working alone with minimum supervisionHave experience in training and supervising staff in matters relating to document control and management

8.1.35MINIMUM REQUIREMENTS FOR TECHNICAL CLERKSHND or B.Sc./B.A. degree from a recognized UniversityProfessionally recognised qualification in document control or library scienceExcellent communication skill to offer advice to SHELL management/engineers on technical documentation issuesFluent knowledge of latest versions of Microsoft Windows applications - Word, Excel, Access & PowerPoint3 - 5 years experience, with a minimum of three years managing and operating manual document management systems and electronic document management systemsPersonnel should be self-motivated and accustomed to working alone with the minimum of supervisionHave received training in and be fully literate in Project Scheduler/Primavera or PACER-CM and Business Objects (added advantage)

8.1.36MINIMUM REQUIREMENTS FOR QUALITY ASSURANCE REPRESENTATIVEEducated to (OND) standard and have achieved a professional recognised qualification in Quality Assurance.10 years experience in the oil & gas construction industry and experience in Nigeria;Lead Assessor certified;Sound working knowledge of the national/international standards associated with the construction of oil and gas plants;The ability to operate in harsh and remote locations;Sound working knowledge of SHELLS standards;Member of a professional body such as the Institute of Quality Assurance;Excellent communicative skills are a prerequisite as personnel will be required to offer advice to SHELL management/engineers on quality issues;Personnel should be self-motivated and accustomed to working alone with the minimum of supervision;5 years experience in formulating SHELL procedures;Minimum 5 audits as Lead Auditor;Essential to be able to read and write in the English language;

8.1.37MINIMUM REQUIREMENTS FOR AUDITORS-ISO 9000/14000Level III - at least 12 years experience in auditing Project Management, Engineering, Procurement, Manufacturing, Construction and Commissioning processes particularly in the oil and gas industryLevel II - 10 years experience in auditing Project Management, Engineering, Procurement, Manufacturing, Construction and Commissioning processes particularly in the oil and gas industryLevel I - 7 years. in auditing Project Management, Engineering, Procurement, Manufacturing, Construction and Commissioning processes particularly in the oil and gas industry;Sound working knowledge of Quality Management Systems and the national/international standards associated with them;HND/B.Sc/B.Eng degree from a recognized University and must have achieved a professionally recognised qualificationExcellent communicative skills are a prerequisite, as personnel will be required to offer advice to SHELL management/engineers on technical issuesPersonnel should be self-motivated and accustomed to working alone with the minimum of supervisionEssential to be able to read and write in the English language fluently and have a working knowledge of the host country in which they are workingKnowledgeable in performing Quality, Technical and Environmental auditsMust have participated in a minimum of 15 auditsHolds a qualification as a lead auditor or assessor in the International Register of Certified Auditors (IRCA) or equivalent;Conversant with preparation of Non-Conformance reports and follow-up on any deficiencies found during surveillance activities;Have received training in and be fully literate in the following software applications latest versionMicrosoft Windows NT latest versionsMicrosoft Word for WindowsMicrosoft ExcelMicrosoft AccessMicrosoft Power point version 4Project Scheduler/Primavera

qualification required

Documents