quality-assurance system for manufacturer of...
TRANSCRIPT
TÜV Rheinland Industrie Service GmbH E-008-D-Rev22 Notifizierte Stelle für Druckgeräte, Kennnummer: 0035 Am Grauen Stein, D-51105 Köln
Certificate
Quality-Assurance System
for Manufacturer of Materials
acc. to Directive 2014/68/EU Certificate no.: 01 202 ROK/Q-10 0044 Name and address of the manufacturer:
Dongkuk Steel Mill Co.,Ltd. 25, Godaegongdan1-gil, Songak-eup, Dangjin-si, Chungcheongnam-do 31719 Korea
Herewith we certify that the material manufacturer has established and applies a Quality Management System. The system was audited according to the European Directive 2014/68/EU, Annex I, Par. 4.3, with regard to the materials as listed in the scope of approval.
Tested acc. to Directive 2014/68/EU:
QM System acc. to EN 764-5, article 4.2
Audit report no.:
ROK/Q-10 0044
Area of validity:
Steel Plates for Pressure Purpose, see annex to certificate
Manufacturing plant:
Dongkuk Steel Mill Co.,Ltd. 25, Godaegongdan1-gil, Songak-eup, Dangjin-si, Chungcheongnam-do 31719 Korea
Valid until:
March 29, 2022
Cologne, April 15, 2019 Dipl.-Ing. (FH) Roman Alexander Meyers
Annex to Certificate No. : 01 202 ROK/Q-10 0044
E-100-E-Questionnaire MM-Form8-Scope-Rev22(2019).doc Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: Dongkuk Mill Steel Co., Ltd 08. Jan 2019
1 TÜV Rheinland
Dangjin Korea Industrie Service
Location: 25, Godaegongdan1(il)-gil, Song-ak-eup, Dangjin-si, Chungcheongnam-do, Korea
Rev.: 4 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness Requirements
mm mm 1=t / 2=kg
Technical Regulations
from Up to
from
Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
1. Materials according to harmonized European standards (hEN) and European Approval for Materials (EAM) acc. Directive 2014/68/EU
The use of the materials according to Directive 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular
material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the
applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
1 P275NL1, P275NL2, P355N, P355NL1, P355NL2
EN 10028-3:2009 N, NT Hot rolled plate
4,5 100 - - - - EN 10028-1:2009
EN 10029
Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved
Annex to Certificate No. : 01 202 ROK/Q-10 0044
E-100-E-Questionnaire MM-Form8-Scope-Rev22(2019).doc Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: Dongkuk Mill Steel Co., Ltd 08. Jan 2019
2 TÜV Rheinland
Dangjin Korea Industrie Service
Location: 25, Godaegongdan1(il)-gil, Song-ak-eup, Dangjin-si, Chungcheongnam-do, Korea
Rev.: 4 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness Requirements
mm mm 1=t / 2=kg
Technical Regulations
from Up to
from Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
2. Materials according to international standards(e.g. ASTM, ASME, IBR, AD-2000 etc.)
The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular
material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the
applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
1 S235JR+N, S235J2+N, S275JR+N, S275J2+N, S355J2+N, S355K2+N
EN 10025-2:2004 AR, N Hot rolled plate
4,5 100 - - - - EN 10025-1:2004
EN 10029
The materials meet the general mechanical and technological requirments for the PED.
2 C ASTM A283 / ASME SA283
AR,M Hot rolled
plate 5 60 - - - -
ASTM A283 / ASME SA283
The pressure equipments manufacturer must define the specific operation condition.
3 C ASTM A285 / ASME SA285
AR Hot rolled
plate 5 40 - - - -
ASTM A285 / ASME SA285
As applicable, the pressure equipment manufacturer or the notified body involved
4 - ASTM A36 / ASME SA36
AR Hot rolled
plate 5 203 - - - -
ASTM A36 / ASME SA36
has to agree(See PED, Annex I, sec. 4.2).
5 60, 65, 70 ASTM A516 / ASME SA516
AR, N Hot rolled
plate 5 100 - - - -
ASTM A516 / ASME SA516
PMA is requested for material grades mentioned in non harmonized standards.
6 Cl1 ASTM A537/ ASME SA537
N Hot rolled
plate 5 70 - - - -
ASTM A537/ ASME SA537
Remarks +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved
Annex to Certificate No. : 01 202 ROK/Q-10 0044
E-100-E-Questionnaire MM-Form8-Scope-Rev22(2019).doc Rev. 22
Scope according to
Directive 2014/68/EU Annex I §4.3
EN 764-4 AD 2000-Merkblatt W0
FPC, Regulation (EU) No. 305/2011(System 2+)
Manufacturer Work Nationality Date Page No..
Company Name: Dongkuk Mill Steel Co., Ltd 08. Jan 2019
3 TÜV Rheinland
Dangjin Korea Industrie Service
Location: 25, Godaegongdan1(il)-gil, Song-ak-eup, Dangjin-si, Chungcheongnam-do, Korea
Rev.: 4 of : 3 GmbH
Cur
-
Materials-term Materials-No.
Material Specification
Delivery Cond.
Article Type of Product
Dimensions Weight max
Technical Specifications
Remarks
Thick-ness
Requirements
mm mm 1=t / 2=kg
Technical Regulations
from Up to
from Up to
result
1 2 3 4 5 6a 6b 7a 7b 8a 8b 9 10
2. Materials according to international standards(e.g. ASTM, ASME, IBR, AD-2000 etc.)
The use of the materials according to DGR 2014/68/EU is bound to the publication of Harmonized European Standards or to the qualification by a European material approval or to the particular
material appraisal. With that the manufacturing reliability for equivalent material grades according to other standards (e.g. BS, AFNOR, ASME) is proved. The requirements and limits of the
applicable code respectively the PED must be observed for the use of material grades listed in column 2 to 4.
7 50 ASTM A572 / ASME SA572
AR,N,M Hot rolled
plate 5 100 - - - -
ASTM A572 / ASME SA572
The materials meet the general mechanical and technological requirments
8 70 ASTM A573 / ASME SA573
N Hot rolled
plate 5 40 - - - -
ASTM A573 / ASME SA573
for the PED. The pressure equipments manufacturer must define the specific operation condition.
As applicable, the pressure equipment manufacturer or the notified body involved
has to agree(See PED, Annex I, sec. 4.2).
PMA is requested for material grades
mentioned in non harmonized standards.
Results +AT = solution annealed +NT = normalized and tempered a = PMA for the use in pressure equipment +AR = as rolled +QT = quenched and tempered in Directive 2014/68/EU neccessary +M = thermo mechanical treated +S = soft annealed +N = normalized or normalizing formed +SR = stress relieved