quality management project
DESCRIPTION
By using:1-X-bar-R charts.2-X-bar-S charts.3- I-MR charts.4- EMWA.5-CUSUM.6- Process Capability.TRANSCRIPT
Mo’tasem H.Y.Abushanap, Bahçeşehir UniversityDepartment of İndustrial Engineering, Bahçeşehir University
Acknowledgments
The appriciation and all thanks to My instructor Assist.Prof.Dr. Demet ÖZGÜR ÜNLÜAKIN, for the whole effort she gave by explaning concept and principle.
And to Hamdi Abushanap co. For thier coboration by giving the required data and answering the questions.
Acknowledgments
The appriciation and all thanks to My instructor Assist.Prof.Dr. Demet ÖZGÜR ÜNLÜAKIN, for the whole effort she gave by explaning concept and principle.
And to Hamdi Abushanap co. For thier coboration by giving the required data and answering the questions.
Conclusions
In all statistical process control tools, the process appears to be in control according to the USL=50 and LSL= 35 m2 per 2 hours.
Conclusions
In all statistical process control tools, the process appears to be in control according to the USL=50 and LSL= 35 m2 per 2 hours.
Aim This İs an approach to check a stone cutting process if it is in control or not, by applying several methods and charts, such as:1- Histogram.2- Run chart.3- Scattered chart.4- statistical process control by the mean of X-bar, R, S and Moving averages, EMWA and cumulative sumation.
Aim This İs an approach to check a stone cutting process if it is in control or not, by applying several methods and charts, such as:1- Histogram.2- Run chart.3- Scattered chart.4- statistical process control by the mean of X-bar, R, S and Moving averages, EMWA and cumulative sumation.
Introduction A Quality management concept application, to verify a process whether it is in control or not ın a company.Company Name : Hamdi Abushanap and Parts co.Location: Amman-Jordan.Profession: Marble and Stone Products.
Introduction A Quality management concept application, to verify a process whether it is in control or not ın a company.Company Name : Hamdi Abushanap and Parts co.Location: Amman-Jordan.Profession: Marble and Stone Products.
X-Bar R chart
X-Bar S chart
I-MR chart
EMWA chart
CUSUM chart
X-Bar R chart
X-Bar S chart
I-MR chart
EMWA chart
CUSUM chart
Process Capability
Moving Average chart
Run chart
Scatterplot
Probability Plot
Process Capability
Moving Average chart
Run chart
Scatterplot
Probability Plot
Timeseries Plot
Histogram
Timeseries Plot
Histogram
Critical to Quatlity Characters The CTQ of the cutting process could be specified as:1- hardness: how hard the piece is.2- Color: how much the color could be the same or homogenous.
Critical to Quatlity Characters The CTQ of the cutting process could be specified as:1- hardness: how hard the piece is.2- Color: how much the color could be the same or homogenous.