quat kruger
TRANSCRIPT
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
TH
GT
CYLINDRICAL CASED AXIAL FLOW FANS
THGT SeriesAdjustable Pitch F400-120, F300-120 and F200-120 Rated Fans
A P P L I C A T I O N S
Car Parks Industrial kitchens
Officially approved to EN12101-3 standard (cer-tificate number 0370-CPD-0348)
Officially approvedto EN12101-3standard (certifi-cate number0370-CPD-0742)
Officially approvedto EN12101-3standard (certifi-cate number0370-CPD-0349)
ON REQUEST
ON REQUEST
Long casing
(L version)
Short casing
Highly versatile range due to different number of available blades and adjustable pitch angles
Pitch angle
Range of adjustable pitch aerofoil blade, cased axial flow fans designed for smoke extract in fire conditions and certified F400-120, F300-120 and F200-120 (CE marked).Casings formed from rolled sheet steel with a
corrosion resistant hot dipped galvanised finish for all models.
All models F400-120 except 2 poles incorporate separate high grade die-cast aluminium blades locked within an aluminium injected hub (diameters from 400 to 630) or a pressed sheet steel hub. (diameters from 710 to 1250).F300-120 and F200-120 models incorporate an aluminium injected hub (diameters from 400 to 800) or a pressed sheet steel hub. (diameters from 900 to 1250).2 POLES F400-120 model with aluminium impeller / hub formed from a one piece casting. All models are available in both short and long casing versions except 2 poles F400-120 model only supplied with long casing. Long casing versions (L) include an external terminal box.Suitable for horizontal or vertical mounting installation.
MotorsAvailable, depending upon the model:- with three phase motors in 4 or 6 poles. - with three phase two speed motors, 4/8 or 6/12
poles.F400-120 motors are IP55, class H insulation.F300-120 motors are IP55, class H insulation.F200-120 motors are IP55, class F insulation.Electrical supplies:
Three phase 230/400V-50Hz up to 3 kW. Three phase 400V-50Hz, for higher power motors and two speed motors. (See characteristics chart).
Motors suitable for inverter control. In emergeny operation, direct protected power supply.
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
108
TH
GT
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
THGT / TGT
Number of poles 4
Nominal diameter (mm) 1250
Number of blades 6
THGT/4-1250-6/_°-_ kWTGT/4-1250-6/_°-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommendedmotor power (kW)
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
Table of correction factors for the calculation of the sound power level spectrum.
– Q = Air volume in, m3/hr and m3/s.– Ps = Static pressure in mmWG and Pa. – Dry air at 20ºC and 760 mmHg.– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THEPERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWGPs
Pa
155
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
TG
TC
ylin
dri
cal c
ased
axi
al f
low
fan
s
Range of adjustable pitch aerofoil blade, cased
axial flow fans.Casings formed from rolled sheet
steel with a corrosion resistant hot dipped
galvanised finish. All models incorporate sep-
arate high grade die-cast aluminium blades
locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting
installation.
All models are available in both short and long
casing versions.
Long casing versions (L) include an exterior terminal
box.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4, 6 or 8 poles
- with three phase two speed motors 2/4,4/8
or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
CYLINDRICAL CASED AXIAL FLOW FANS
TGT SeriesAdjustable Pitch Fans
Short casing
Long casing
(L version)
A P P L I C A T I O N S
WorkshopsWarehouses Commercial premises
Car Parks
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements. Pitch angle
173
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
TH
GT
THGT / TGT
Table of correction factors for the calculation of the sound power level spectrum.
Number of poles 4
Nominal diameter (mm) 800
Number of blades 3
THGT/4-800-3/_°-_ kWTGT/4-800-3/_°-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommendedmotor power (kW)
Hz A B C
63 22 20 18
125 19 19 17
250 13 11 12
500 6 5 6
1000 4 5 5
2000 6 7 6
4000 11 13 12
8000 18 20 20
– Q = Air volume in, m3/hr and m3/s.– Ps = Static pressure in mmWG and Pa. – Dry air at 20ºC and 760 mmHg.– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THEPERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWGPs
Pa
148
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
TH
GT
CYLINDRICAL CASED AXIAL FLOW FANS
THGT SeriesAdjustable Pitch F400-120, F300-120 and F200-120 Rated Fans
A P P L I C A T I O N S
Car Parks Industrial kitchens
Officially approved to EN12101-3 standard (cer-tificate number 0370-CPD-0348)
Officially approvedto EN12101-3standard (certifi-cate number0370-CPD-0742)
Officially approvedto EN12101-3standard (certifi-cate number0370-CPD-0349)
ON REQUEST
ON REQUEST
Long casing
(L version)
Short casing
Highly versatile range due to different number of available blades and adjustable pitch angles
Pitch angle
Range of adjustable pitch aerofoil blade, cased axial flow fans designed for smoke extract in fire conditions and certified F400-120, F300-120 and F200-120 (CE marked).Casings formed from rolled sheet steel with a
corrosion resistant hot dipped galvanised finish for all models.
All models F400-120 except 2 poles incorporate separate high grade die-cast aluminium blades locked within an aluminium injected hub (diameters from 400 to 630) or a pressed sheet steel hub. (diameters from 710 to 1250).F300-120 and F200-120 models incorporate an aluminium injected hub (diameters from 400 to 800) or a pressed sheet steel hub. (diameters from 900 to 1250).2 POLES F400-120 model with aluminium impeller / hub formed from a one piece casting. All models are available in both short and long casing versions except 2 poles F400-120 model only supplied with long casing. Long casing versions (L) include an external terminal box.Suitable for horizontal or vertical mounting installation.
MotorsAvailable, depending upon the model:- with three phase motors in 4 or 6 poles. - with three phase two speed motors, 4/8 or 6/12
poles.F400-120 motors are IP55, class H insulation.F300-120 motors are IP55, class H insulation.F200-120 motors are IP55, class F insulation.Electrical supplies:
Three phase 230/400V-50Hz up to 3 kW. Three phase 400V-50Hz, for higher power motors and two speed motors. (See characteristics chart).
Motors suitable for inverter control. In emergeny operation, direct protected power supply.
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
108
TH
GT
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
THGT / TGT
Number of poles 4
Nominal diameter (mm) 1000
Number of blades 6
THGT/4-1000-6/_°-_ kWTGT/4-1000-6/_°-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommendedmotor power (kW)
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
Table of correction factors for the calculation of the sound power level spectrum.
– Q = Air volume in, m3/hr and m3/s.– Ps = Static pressure in mmWG and Pa. – Dry air at 20ºC and 760 mmHg.– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THEPERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWGPs
Pa
153
Dimensions – 50Hz
Propeller fan for wall or panel mounting to convey air directly to the outside.
Sickle Blade impellers, in conjunction with the external rotor motors.
Wall plate is made of high grade galvanized sheet steel, with painted finish.
Statically and dynamically balanced to ISO 1940 standard.
Low noise level with high efficiency.
Accessories such as speed controller and mounting accessories can be
supplied upon request.
Performance of 710-1000 are not AMCA licensed.
Propeller Fans – APK Series
Model □A □B ØD ØE ØF G H I J Wt (kg)
APK 315 4P-1 1S 400 330 320 365 10 - 149 68 82 7
APK 355 4P-1 1S 450 380 363 411 10 - 156 75 82 7.5
APK 400 4P-1 1S 500 420 410 464 10 12 200 78 122 9
APK 450 4P-1 1S 560 480 457 522 10 - 204 91 114 11.5
APK 500 4P-1 1S 630 560 512 572 10 13 201 97 104 16
APK 500 6P-1 1S 630 560 512 572 10 - 201 97 104 16
APK 560 6P-1 1S 710 630 570 649 10 - 213 99 114 21.5
APK 560 6P-3 1S 710 630 570 649 10 - 188 99 89 21.5
APK 630 4P-3 1S 800 710 640 730 12 25 182 103 79 24
APK 630 6P-3 1S 800 710 640 730 12 7 182 103 79 24
APK 710 6P-3 1S 900 800 720 810 12 11 207 92 115 27
Kruger Ventilation Industries certifies that the APK series
shown herein is licensed to bear the AMCA Seal. The
ratings shown are based on tests and procedures performed in accordance with
AMCA publication 211 and comply with the requirements
of the AMCA Certified Ratings Program.
315 - 710
1 PHASE 3 PHASE
Technical Data – 50Hz
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max. Current in AMP Insulation
Class dB (A) at 3m
RPM
230V 400V
APK 315 4P-1 1S 2048 120 IP54 Single Phase 4 50 0.53 - F 47 1400
APK 355 4P-1 1S 2768 120 IP54 Single Phase 4 50 0.55 - F 53 1400
APK 400 4P-1 1S 4870 290 IP54 Single Phase 4 50 1.2 - F 54 1360
APK 450 4P-1 1S 6516 380 IP54 Single Phase 4 50 2.0 - F 58 1370
APK 500 4P-1 1S 8752 850 IP54 Single Phase 4 50 3.8 - F 63 1350
APK 500 6P-1 1S 5785 310 IP54 Single Phase 6 50 1.3 - F 54 870
APK 560 6P-1 1S 8150 410 IP54 Single Phase 6 50 1.8 - F 55 820
APK 560 6P-3 1S 8366 450 IP54 Three Phase 6 50 - 0.9 F 55 860
APK 630 4P-3 1S 12272 1400 IP54 Three Phase 4 50 - 2.5 F 67 1330
APK 630 6P-3 1S 11423 740 IP54 Three Phase 6 50 - 1.5 F 57 880
□A□B
ØD
ØE
ØFG
H
IJ
J
H
APK 710 6P-3 1S 15145 1000 IP54 Three Phase 6 50 2.6 F 60 920-
Performance Data – 50Hz
Dimensions – 50Hz
Propeller Fans – APK Series
Model
□A
□B
ØD
ØE
ØF
H
M
Wt (kg)
APK 800 6P-3 1S
970
910
797
960
14.5
170
17
46
APK 800 8P-3 1S
970
910
797
960
14.5
170
17
45
APK 900 12P-3
1S
1070
1010
914
1115
14.5
210
22
55
APK 1000 12P-3 1S
1170
1110
1000
1140
14.5
210
22
61
-
Performance certified is for installation type A –
Free inlet, Free outlet.
- Performance ratings do not include the effects of appurtenances (accessories).
-
Speed (RPM) shown is nominal. Performance is based on actual speed of test.
Sta
tic P
ressu
re (
Pa)
Flow Rate (m³/h)
0
40
80
120
160
0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000 26000 28000
Sta
tic P
ressu
re (
Pa)
Flow Rate (m3/h)
800 -
1000
□A
□B
ØD
ØE
ØF
H
M
0
40
80
120
160
200
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
Technical Data – 50Hz
ModelMax Qm³/h
PowerW
MotorProtection
MotorN°
PoleHz
Max. Current in AMP at
400V
InsulationClass
dB (A)at 3m
RPM
APK 800 8P-3 1S 14378 760 IP54 Three Phase 8 50 1.83 F 54 630
APK 1000 12P-3 1S 23794 890 IP54 Three Phase 12 50 1.9 F 50 420
IP54 6 50 3.5 F 61 890190026722APK 800 6P-3 1S Three Phase
APK 900 12P-3 1S 18439 690 IP54 Three Phase 12 50 2.2 F 49 440
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Dimensions – 50Hz
Propeller fan for wall or panel mounting to convey air directly to the outside.
Sickle Blade impellers, in conjunction with the external rotor motors.
Wall plate is made of high grade galvanized sheet steel, with painted finish.
Statically and dynamically balanced to ISO 1940 standard.
Low noise level with high efficiency.
Accessories such as speed controller and mounting accessories can be
supplied upon request.
Performance of 710-1000 are not AMCA licensed.
Propeller Fans – APK Series
Model □A □B ØD ØE ØF G H I J Wt (kg)
APK 315 4P-1 1S 400 330 320 365 10 - 149 68 82 7
APK 355 4P-1 1S 450 380 363 411 10 - 156 75 82 7.5
APK 400 4P-1 1S 500 420 410 464 10 12 200 78 122 9
APK 450 4P-1 1S 560 480 457 522 10 - 204 91 114 11.5
APK 500 4P-1 1S 630 560 512 572 10 13 201 97 104 16
APK 500 6P-1 1S 630 560 512 572 10 - 201 97 104 16
APK 560 6P-1 1S 710 630 570 649 10 - 213 99 114 21.5
APK 560 6P-3 1S 710 630 570 649 10 - 188 99 89 21.5
APK 630 4P-3 1S 800 710 640 730 12 25 182 103 79 24
APK 630 6P-3 1S 800 710 640 730 12 7 182 103 79 24
APK 710 6P-3 1S 900 800 720 810 12 11 207 92 115 27
Kruger Ventilation Industries certifies that the APK series
shown herein is licensed to bear the AMCA Seal. The
ratings shown are based on tests and procedures performed in accordance with
AMCA publication 211 and comply with the requirements
of the AMCA Certified Ratings Program.
315 - 710
1 PHASE 3 PHASE
Technical Data – 50Hz
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max. Current in AMP Insulation
Class dB (A) at 3m
RPM
230V 400V
APK 315 4P-1 1S 2048 120 IP54 Single Phase 4 50 0.53 - F 47 1400
APK 355 4P-1 1S 2768 120 IP54 Single Phase 4 50 0.55 - F 53 1400
APK 400 4P-1 1S 4870 290 IP54 Single Phase 4 50 1.2 - F 54 1360
APK 450 4P-1 1S 6516 380 IP54 Single Phase 4 50 2.0 - F 58 1370
APK 500 4P-1 1S 8752 850 IP54 Single Phase 4 50 3.8 - F 63 1350
APK 500 6P-1 1S 5785 310 IP54 Single Phase 6 50 1.3 - F 54 870
APK 560 6P-1 1S 8150 410 IP54 Single Phase 6 50 1.8 - F 55 820
APK 560 6P-3 1S 8366 450 IP54 Three Phase 6 50 - 0.9 F 55 860
APK 630 4P-3 1S 12272 1400 IP54 Three Phase 4 50 - 2.5 F 67 1330
APK 630 6P-3 1S 11423 740 IP54 Three Phase 6 50 - 1.5 F 57 880
□A□B
ØD
ØE
ØFG
H
IJ
J
H
APK 710 6P-3 1S 15145 1000 IP54 Three Phase 6 50 2.6 F 60 920-
Performance Data – 50Hz
Dimensions – 50Hz
Propeller Fans – APK Series
Model
□A
□B
ØD
ØE
ØF
H
M
Wt (kg)
APK 800 6P-3 1S
970
910
797
960
14.5
170
17
46
APK 800 8P-3 1S
970
910
797
960
14.5
170
17
45
APK 900 12P-3
1S
1070
1010
914
1115
14.5
210
22
55
APK 1000 12P-3 1S
1170
1110
1000
1140
14.5
210
22
61
-
Performance certified is for installation type A –
Free inlet, Free outlet.
- Performance ratings do not include the effects of appurtenances (accessories).
-
Speed (RPM) shown is nominal. Performance is based on actual speed of test.
Sta
tic P
ressu
re (
Pa)
Flow Rate (m³/h)
0
40
80
120
160
0 2000 4000 6000 8000 10000 12000 14000 16000 18000 20000 22000 24000 26000 28000
Sta
tic P
ressu
re (
Pa)
Flow Rate (m3/h)
800 -
1000
□A
□B
ØD
ØE
ØF
H
M
0
40
80
120
160
200
0 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000 11000 12000 13000
Technical Data – 50Hz
ModelMax Qm³/h
PowerW
MotorProtection
MotorN°
PoleHz
Max. Current in AMP at
400V
InsulationClass
dB (A)at 3m
RPM
APK 800 8P-3 1S 14378 760 IP54 Three Phase 8 50 1.83 F 54 630
APK 1000 12P-3 1S 23794 890 IP54 Three Phase 12 50 1.9 F 50 420
IP54 6 50 3.5 F 61 890190026722APK 800 6P-3 1S Three Phase
APK 900 12P-3 1S 18439 690 IP54 Three Phase 12 50 2.2 F 49 440
Dimensions• DWA series are designed for theremoval of odours and moisture fromtoilets, bathrooms, small offices andany small room requiring ventilation.
• Fan casings and impellers aremanufactured from tough injectionmoulded polypropylene, the frontgrille from high quality ABS and theneon indicators from polycarbonate.
• Class II electrical insulation andsplash proof protection.
• All motor are single phase, shadedpole, 230V, 50Hz fitted with internalthermal protection devise to protectagainst abnormal overheating.
• Max. working temp +40 C
• Easy to install, aesthetically pleasing,slimline and extremely quiet.
KRUGER VENTILATION INDUSTRIES PTE LTD – No. 17 Tuas Avenue 10 – Singapore 639141 – Tel +65 68611577 – Fax +65 68613577The company is always improving and developing its products, therefore the company reserves the right of making changes to the illustrated products. Certified dimension can be provided upon request.
LEA057.E0 03/03Edition 2Printed on Apr 11
Slimline Axial Fan – DWA Series
0
10
20
30
40
50
0 50 100 150 200Flow rate ( m 3/h )
Stat
ic P
ress
ure
( Pa
)
0
20
40
60
80
0 100 200 300
Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
0
10
20
30
40
50
0 20 40 60 80 100Flow rate ( m3/h )
Stat
ic P
ress
ure
( Pa
)
DWA 100 DWA 200 DWA 300
Technical Data
Model HoleOpening Ø
Max Qm3/h
PowerW Motor N°
Pole Hz Voltage dB (A)at 3m RPM
DWA 100 100mm 95 13 Single Phase 2 50 230 40 2500
DWA 200 125mm 185 20 Single Phase 2 50 230 45 2500
DWA 300 160mm 280 35 Single Phase 2 50 230 47 2200
DWA 100DWA 200 DWA300
Installation
Model A C D ØE Wt(kg)
DWA 100 158 68 85 98 0.44
DWA 200 180 83 108 118 0.80
DWA 300 200 104 129 152 1.44All Dimension in mm.
Hole Opening Ø
Hole Opening Ø
A CD D
C51
A 148
ØE
ØE
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
TH
GT
CYLINDRICAL CASED AXIAL FLOW FANS
THGT SeriesAdjustable Pitch F400-120, F300-120 and F200-120 Rated Fans
A P P L I C A T I O N S
Car Parks Industrial kitchens
Officially approved to EN12101-3 standard (cer-tificate number 0370-CPD-0348)
Officially approvedto EN12101-3standard (certifi-cate number0370-CPD-0742)
Officially approvedto EN12101-3standard (certifi-cate number0370-CPD-0349)
ON REQUEST
ON REQUEST
Long casing
(L version)
Short casing
Highly versatile range due to different number of available blades and adjustable pitch angles
Pitch angle
Range of adjustable pitch aerofoil blade, cased axial flow fans designed for smoke extract in fire conditions and certified F400-120, F300-120 and F200-120 (CE marked).Casings formed from rolled sheet steel with a
corrosion resistant hot dipped galvanised finish for all models.
All models F400-120 except 2 poles incorporate separate high grade die-cast aluminium blades locked within an aluminium injected hub (diameters from 400 to 630) or a pressed sheet steel hub. (diameters from 710 to 1250).F300-120 and F200-120 models incorporate an aluminium injected hub (diameters from 400 to 800) or a pressed sheet steel hub. (diameters from 900 to 1250).2 POLES F400-120 model with aluminium impeller / hub formed from a one piece casting. All models are available in both short and long casing versions except 2 poles F400-120 model only supplied with long casing. Long casing versions (L) include an external terminal box.Suitable for horizontal or vertical mounting installation.
MotorsAvailable, depending upon the model:- with three phase motors in 4 or 6 poles. - with three phase two speed motors, 4/8 or 6/12
poles.F400-120 motors are IP55, class H insulation.F300-120 motors are IP55, class H insulation.F200-120 motors are IP55, class F insulation.Electrical supplies:
Three phase 230/400V-50Hz up to 3 kW. Three phase 400V-50Hz, for higher power motors and two speed motors. (See characteristics chart).
Motors suitable for inverter control. In emergeny operation, direct protected power supply.
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements.
108
TH
GT
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
THGT / TGT
Number of poles 4
Nominal diameter (mm) 900
Number of blades 6
THGT/4-900-6/_°-_ kWTGT/4-900-6/_°-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommendedmotor power (kW)
Table of correction factors for the calculation of the sound power level spectrum.
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
– Q = Air volume in, m3/hr and m3/s.– Ps = Static pressure in mmWG and Pa. – Dry air at 20ºC and 760 mmHg.– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THEPERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWGPs
Pa
151
TG
TC
ylin
dri
cal c
ased
axi
al f
low
fan
s
Range of adjustable pitch aerofoil blade, cased
axial flow fans.Casings formed from rolled sheet
steel with a corrosion resistant hot dipped
galvanised finish. All models incorporate sep-
arate high grade die-cast aluminium blades
locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting
installation.
All models are available in both short and long
casing versions.
Long casing versions (L) include an exterior terminal
box.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4, 6 or 8 poles
- with three phase two speed motors 2/4,4/8
or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
CYLINDRICAL CASED AXIAL FLOW FANS
TGT SeriesAdjustable Pitch Fans
Short casing
Long casing
(L version)
A P P L I C A T I O N S
WorkshopsWarehouses Commercial premises
Car Parks
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements. Pitch angle
173
TH
GT
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
THGT / TGT
Number of poles 4
Nominal diameter (mm) 800
Number of blades 6
THGT/4-800-6/_°-_ kWTGT/4-800-6/_°-_ kW
Performance curves - 4 pole motors - THGT / TGT
Recommendedmotor power (kW)
Table of correction factors for the calculation of the sound power level spectrum.
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 5 5 6
1000 4 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
– Q = Air volume in, m3/hr and m3/s.– Ps = Static pressure in mmWG and Pa. – Dry air at 20ºC and 760 mmHg.– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THEPERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Absorbed power (W)
mmWGPs
Pa
149
TG
TC
ylin
dri
cal c
ased
axi
al f
low
fan
s
Range of adjustable pitch aerofoil blade, cased
axial flow fans.Casings formed from rolled sheet
steel with a corrosion resistant hot dipped
galvanised finish. All models incorporate sep-
arate high grade die-cast aluminium blades
locked within a pressed sheet steel hub.
Suitable for horizontal or vertical mounting
installation.
All models are available in both short and long
casing versions.
Long casing versions (L) include an exterior terminal
box.
Motors
Available, depending upon the model:
- with three phase motors in 2, 4, 6 or 8 poles
- with three phase two speed motors 2/4,4/8
or 6/12 poles.
All the motors are IP55, Class F insulation
Electrical supplies:
Three phase 230/400V-50Hz up to 3kW.
Three phase 400V-50Hz, for higher power
motors and two speed motors.
(See characteristics chart).
CYLINDRICAL CASED AXIAL FLOW FANS
TGT SeriesAdjustable Pitch Fans
Short casing
Long casing
(L version)
A P P L I C A T I O N S
WorkshopsWarehouses Commercial premises
Car Parks
Highly versatile range due to different number of available blades and adjustable pitch angles
Impellers with 3, 5, 6, 7 or 9 blades with adjustable pitch angles, allowing the most optimum selection to achieve with every kind of
installation requirements. Pitch angle
173
Cyl
ind
rica
l cas
ed a
xial
flo
w f
ans
TH
GT
A
B C
0 5000 10000 15000 20000 25000 30000 Q (m3/h)
1 2 3 4 5 6 7 8 Q (m3/s)
0
5
10
15
20
25
30
35
40
45
50
55
60
mm.c.d.a
0
50
100
150
200
250
300
350
400
450
500
550
600
Pe (Pa)
8°14°
16°
18°
20°
24°
22°
26°28°30°32°
0 5000 10000 15000 20000 25000 30000 Q (m3/h)0
500
1000
1500
2000
2500
3000
3500
4000
Pabs (W)
0.75
1.1
1.5
2.2
3
4
PotenciaMotor(kW)RecomendadaPotenciaAbsorbida (W)
32°
30°
28°26°
24°22°
20°
18°16°
14°12°
10°8°
9291919393
93LwdB(A)91919493
92939691
12°10°
93
Número de polos 4
Diámetro nominal (mm) 710
Número de palas 6
THGT F300-F200/ TGT
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 6 5 6
1000 5 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
THGT F200-F300 / TGT
Table of correction factors for the calculation of the sound power level spectrum.
Number of poles 4
Nominal diameter (mm) 710
Number of blades 6
THGT/4-710-6/_°-_ kWTGT/4-710-6/_°-_ kW
mmWGPs
Pa
Hz A B C
63 38 38 31
125 22 21 19
250 12 9 12
500 6 5 6
1000 5 5 5
2000 7 8 6
4000 13 14 11
8000 21 23 19
NEWOnly TGT, THGT F200 and F300
– Q = Air volume in, m3/hr and m3/s.– Ps = Static pressure in mmWG and Pa. – Dry air at 20ºC and 760 mmHg.– Performance data in accordance with ISO 5801 and AMCA 210-99 Standards.
THE SOUND LEVEL VALUES DETAILED IN THEPERFORMANCE CURVES CORRESPOND TO SOUND
POWER LEVELS (LW) MEASURED IN DB(A).TO CONVERT THIS DATA INTO SOUND PRESSURE
LEVEL VALUES (LP DB(A)).
Performance curves - 4 pole motors - THGT F200 - F300 / TGT
Absorbed power (W)Recommendedmotor power (kW)
146
Plate Mounted Axial Flow Fans – APM Series
Technical Data
Model Max Q m³/h
Power W
Motor Protection
Motor N°
Pole Hz
Max Amp
Volt Insulation
Class dB (A) at 3m
RPM
APM 200 500 1 Phase 4 50 230 B 1300
APM 250 900 1 Phase 4 50 230 B 1300
APM 315 1400 1 Phase 4 50 230 B 1300
APM 355 1800 1 Phase 4 50 230 B 1300
APM 400 1 Phase 4 50 230
* dB(A) at 3m measured at free discharge.
Dimension
B
A
ØC
ØD
EF
Model □A □B C D E F Wt (kg)
APM 200 266 222 9 205 19
APM 250 333 275.5 9 255 31
APM 315 400 336.5 10.5 305 35.5
APM 355 465 390 10.5 361 34.5
APM 400 500 420 10 400 7.3
All Dimension in mm.
All Dimensions in mm
∅ ∅
APM Series is designed for direct wall-mounting or panel-mounting.
Suitable for ventilation application where the extraction of small volume of air at low pressure is required, eg. cafes, bars, small restaurants, commercial premises and small workshops.
Complete with one piece bell mouth inlet and mounting plate manufactured from pressed galvanised steel with polyester painting finish.
Fitted with steel finger-proof guard as standard mounted at the inlet side of fan.
5-bladed impeller manufactured from galvanised steel sheet with epoxy-polyester
painting finish.
Incorporates single phase shaded pole asynchronous induction motor and an auto reset thermal overload protection device.
Supplied with a cable for connection to electrical supply.
Max. operating temperature:
+40℃
88
99
99
106
112 33
1.8
2.2
3.2
4.3
3400
18
22
30
40
170
IP44
IP44
IP44
IP44
IP44
0.08
0.10
0.15
0.17
0.70 F
36
42
48
53
57 1065
APM 2 00-355: +6 0℃APM 400:
Electrical Accessories
Electronic Single Phase Speed Controllers
- Available in Wall Box or Flush Mount versions.
- Fuse protected + spare fuses included.
- Radio interference protected.
- Minimum speed adjustment.
- Single ON/OFF and speed regulation control knob.
Type
Electrical
Supply
IP Prot.
Power (VA)
Max. Amp
Ins. Cl
Operating Temp.
Type
Hz
V
REB-1N
50
220-240
IP-44
220
1.0
II
0-40°C
Wall Box
REB-1NE
50
220-240
IP-44
220
1.0
II
0-40°C
Flush Mounted
1
2
34
5
67
8
9
10
0
80 22 46
Performance
0
10
20
30
40
50
60
70
80
90
100
0 250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500
Sta
tic P
ress
ure
Ps (
Pa)
Flow Rate Q (m3/h)