r en smart map pro - alpine europe · on the map display: observe actual traffic restrictions and...

SMART MAP PRONVD-Z001Prog. Ver. Z1.00

FOR CAR USE ONLY/POUR APPLICATION AUTOMOBILE UNIQUEMENT/PARA USO EN AUTOMÓVILES/ENDAST FÖR BILBRUK

EN

FR

ES

SE

OWNER’S MANUALPlease read before using this disc.

MODE D’EMPLOIVeuillez lire avant d’utiliser ce disque.

MANUAL DE OPERACIÓNLea este manual antes de utilizar este disco.

ANVÄNDARHANDLEDNINGLäs igenom handledningen innau du använder den här skivan.

DVD NAVIGATION MAPCARTE DE NAVIGATION DVDMAPA DE NAVEGACIÓN DEL DVDDVD NAVIGERINGSKARTA

R

2

Precautions

This product is intended to safely provideturn by turn instruction to get you to adesired destination. Please read thefollowing precautions to ensure that youuse your navigation system correctly.

L This product is not a substitute for yourpersonal judgment. Any route suggestionsmade by the navigation system may neversupersede any local traffic regulations oryour personal judgment and/or knowledgeof safe driving practices. Do not followroute suggestions if the navigation systeminstructs you to perform an unsafe or illegalmaneuver, places you in an unsafe situation,or routes you into an area which youconsider unsafe.

L Glance at the monitor screen only whennecessary and safe to do so. If prolongedviewing of the screen is necessary, stop thevehicle in a safe and legal manner andlocation.

L Do not input destinations, change settings,or access any functions requiring aprolonged view of the monitor and/orremote control while you are driving. Stopthe vehicle in a safe and legal manner andlocation before attempting to access thesystem.

L Do not use the navigation system to routeyou to emergency services. Not all locationsof emergency service providers such aspolice and fire stations, hospitals, andclinics are contained in the database. Pleaseuse your own judgment and your ability toask for directions in these situations.

L The map database contained within themedia (DVD ROM) in which it is stored isthe most recent map data available at thetime of production. Because of changes instreets and neighbourhoods, there may besituations where the navigation system maynot be able to route you to your desireddestination. In these cases, use your ownpersonal judgment.

L The map database is designed to provideyou with route suggestions, it does not takeaccount of the relative safety of a suggestedroute, or of factors which may affect thetime required to reach your destination. Thedatabase does not reflect road closures orconstruction, road characteristics (i.e. typeof road surface, slope or grade, weight orheight restrictions, etc.), traffic congestion,weather conditions, or any other factorswhich may affect the safety or timing ofyour driving experience. Use your personaljudgment if the navigation system is unableto provide you with an alternate route.

L There may be situations where thenavigation system may display the vehicle’slocation erroneously. Use your own drivingjudgment in this situation, taking intoaccount current driving conditions. Pleasebe aware that in this situation, thenavigation system should correct thevehicle’s position automatically; however,there may be times where you may have tocorrect the position yourself. If this is thecase, stop the vehicle in a safe and legalmanner and location before attemptingoperation.

L Make certain that the volume level of themonitor is set to a level which still allowsyou to hear outside traffic and emergencyvehicles. Driving while unable to hearoutside sounds could cause an accident.

L Please make certain that any other personwho intends on using the navigation systemreads these precautions and the followinginstructions carefully.

L If there is anything in the manual which youdo not understand, or are uncertain about theoperation of the navigation system, pleasecontact an authorized Alpine representativebefore using the navigation system.

PRECAUTIONSIMPORTANT INFORMATION, PLEASE READ CAREFULLY BEFOREUSING THIS PRODUCT.

3

EN

a Read the manuals for this disc and the systemcomponents carefully before using your navigationsystem. They contain instructions on how to use thesystem in a safe and effective manner. Alpine cannot beresponsible for problems resulting from failure toobserve the instructions in these manuals.

a This manual uses various pictorial displays to show youhow to use this product safely and to alert you topotential dangers resulting from improper connectionsand operation. Following are the meanings of thesepictorial displays. It is important to fully understand themeanings of these pictorial displays in order to use thismanual and the system properly.

This symbol means important instructions. Failure to heed them canresult in serious injury or death.

This symbol means important instructions. Failure to heed them canresult in injury or material property damage.

aMeaning of displays

Points to Observe for Safe Usage

Warning

Caution

Warning

DO NOT OPERATE ANY FUNCTION THAT TAKESYOUR ATTENTION AWAY FROM SAFELYDRIVING YOUR VEHICLE.Any function that requires your prolongedattention should only be performed after comingto a complete stop. Always stop the vehicle in asafe location before performing these functions.Failure to do so may result in an accident.

DO NOT DISASSEMBLE OR ALTER THISPRODUCT.Doing so may result in an accident, fire or electricshock.

KEEP SMALL OBJECTS SUCH AS BATTERIESOUT OF THE REACH OF CHILDREN.Swallowing them may result in serious injury. Ifswallowed, consult a physician immediately.

USE THIS PRODUCT FOR MOBILE 12VAPPLICATIONS.Use for other than its designed application mayresult in fire, electric shock or other injury.

DO NOT PLACE HANDS, FINGERS OR FOREIGNOBJECTS IN INSERTION SLOTS OR GAPS.Doing so may result in personal injury or damageto the product.

MINIMIZE DISPLAY VIEWING WHILE DRIVING.Viewing the display may distract the driver fromlooking ahead of the vehicle and cause anaccident.

DO NOT FOLLOW ROUTE SUGGESTIONS IF THENAVIGATION SYSTEM INSTRUCTS YOU TOPERFORM AN UNSAFE OR ILLEGALMANEUVER, OR PLACES YOU IN AN UNSAFESITUATION OR AREA.This product is not a substitute for your personaljudgment. Any route suggestions by this systemshould never supersede any local trafficregulations or your personal judgment orknowledge of safe driving practice.

Caution

HALT USE IMMEDIATELY IF A PROBLEMAPPEARS.Failure to do so may cause personal injury ordamage to the product. Return it to yourauthorized Alpine dealer or the nearest AlpineService Centre for repairing.

KEEP FINGERS AWAY WHILE THE MOTORIZEDFRONT PANEL OR MOVING MONITOR IS INMOTION.Failure to do so may result in personal injury ordamage to the product.

This indicates supplementary explanation of operation of the system.Tips

4

Precautions

WARNING

• Operation of the system while driving is dangerous. Users should stop vehiclebefore operating the software.

• Road conditions and regulations take precedence over information containedon the map display: observe actual traffic restrictions and circumstances whiledriving.

• This software is designed for use exclusively in the NVE-N099P series. Itcannot and may not be used in conjunction with other hardware.

In using this DVD-ROM “SMART MAP PRO” (hereinafter referred to as “Disk”), as part ofthe Aisin AW Co., Ltd. (“Aisin AW”) and Navigation Technologies Corporation (“NavTech”)Database (hereinafter referred to as “Database”), you are bound by the terms andconditions set forth below. By breaking the seal on this package, and using your copy ofthe Database and Disk, you have demonstrated your agreement to the terms andconditions of this Agreement. You should therefore, make sure that you read andunderstand the following provisions.

• The Disk and Database may not be copied, duplicated, processed, or otherwisemodified, in whole or in part, without the express written permission of Aisin AW,NavTech and Alpine Electronics, Inc. (“Alpine”).

• Neither the Disk nor the Database may be transferred or sublicensed to any third partyfor profit, rent or loan, or licensed for reuse in any manners.

• The Disk and/or Database may not be decompiled, reverse engineered or otherwisedisassembled, in whole or in part.

• The Disk and Database may not be used in a network or by any other manner ofsimultaneous use in multiple systems.

• The Disk and Database are intended solely for personal use (or internal use where theend-user business), or the consumer. The Disk and Database are not to be used forcommercial purposes.

• Neither Aisin AW, Alpine nor NavTech guarantees to the customer that the functionsincluded in the Disk and Database meet a specific objective of user.

• Neither Aisin AW, Alpine nor NavTech shall be responsible for any damages caused bythe use of the Disk and/or Database to the actual user and to any third party.

• The Warranty on the Disk and Database shall not extend to an exchange or refund dueto misspelling, omission of letters, or any other cosmetic discrepancy in layout found inDisk and/or Database.

• The right to use the Disk and Database shall expire either when the user destroys thissoftware, or when any of the terms for use is violated and Aisin AW, Alpine and/orNavTech exercises the option to revoke the license to use this software.

• The terms and conditions hereof apply to all subsequent users and owners as well as tothe actual purchaser.

User Agreement

Traffic Information in the UK provided by ITIS Holdings Plc.

V-Trafic informations in France are provided by Mediamobile company.

5

EN

Table of Contents

• This manual explains operations using remote control RUE-4141.If the navigation system is connected to Alpine touch panel-compatible monitor IVA-D300R, IVA-D300RB orTME-M770, etc., the touch operation is possible. For details, refer to “Touch operation” on page 10.

PrecautionsIMPORTANT INFORMATION, PLEASE READ

CAREFULLY BEFORE USING THISPRODUCT. ........................................................ 2

Points to Observe for Safe Usage ........................ 3User Agreement ................................................... 4

PrefaceNavigation terminology ....................................... 6Features ................................................................ 7

Before Using The SystemRewriting operating system programme.............. 8Switching the display on or off ............................ 9Touch operation ................................................. 10How to switch the map displays ........................ 12Main menu and sub-menu ................................. 13Point setting menu ............................................. 14Change the map scale ........................................ 15

Basic OperationDeciding the route ............................................. 16Selecting from the route menu (three routes

searching) ........................................................ 18Suspending or resuming the route guidance ...... 19Erasing the route ................................................ 19Registering your home....................................... 20

Searching For DestinationsSearching for a destination from its address ...... 22Searching for a point of interest (POI) .............. 24Searching from postcode ................................... 25Setting the local point icon display ................... 26Searching for the local POIs using the their icons ... 26Searching from Telephone number .................... 27Searching from memory points ......................... 28Searching by Quick access points ..................... 28Searching for home............................................ 28Searching from previous destinations

searched ........................................................... 29Searching from intersection ............................... 29Searching from motorway entrance/exit ............ 30Searching from start point ................................. 30Searching from Coordinates .............................. 31Searching by scrolling displayed map ............... 31

Route CheckingOverviewing the searched route ........................ 32

Previewing the searched route ........................... 33

Guidance Screen ConfigurationGuidance map display ....................................... 34Dual-screen display ........................................... 35

Route EditingAdding destinations ........................................... 36Reordering destinations ..................................... 36Deleting destinations ......................................... 37Searching for a detour ....................................... 37Changing the conditions for the route searching ... 38Setting the route options .................................... 38

Memory PointsStoring locations in memory ............................. 39Deleting the memory points .............................. 39Editing the memory points ................................ 40Deleting the stored previous destinations .......... 42

TMC OperationSetting the RDS-TMC ....................................... 43Displaying the Traffic event information on route ... 44Displaying all Receiving Traffic event

information ...................................................... 45Displaying the TMC event list ........................... 45Detailed display of traffic event ......................... 45

Customizing SetupsHow to change the setups .................................. 46Screen position adjustment ................................ 47

OthersVehicle position/direction correction ................. 48Resetting after tyre replacement ........................ 48Adjusting the volume level for the navigation

system .............................................................. 49Drive simulation ................................................ 49Viewing GPS screens ......................................... 50Automatic dial operation ................................... 50Automatic Dialling from a Point of Interest item ... 50Automatic Dialling from a Memory Point ........ 51

ReferenceButtons and functions of remote controls .......... 52Remote control button and touch button ........... 53In case of difficulty ............................................ 54If this message appears ...................................... 55

Preface

6

Memory pointsLocations you go tofrequently can be storedinto memory and markedon the map. The systemcan store up to 200 points.You can add icons at thememory points so that thesystem also displays theicons on the map.

Motorway-preference selectionWhen searching for routes with the navigationsystem, you can switch between searching forroutes that give priority to motorways and thosethat give priority to ordinary roads. When youspecify motorway preference, the navigationsystem automatically searches for a route thatgives priority to motorways and guides you alongthat route.

Navigation terminologyPreface

NavigationThe navigation system displays and tracks thevehicle’s position and movement on a movingmap display. When a destination is input, thenavigation system quickly calculates a route andguides you along the route with pictorial displaysand voice prompts.

Current vehicle positionThe navigation system integrates the GPS (GlobalPositioning Satellite) signals received and the mapinformation stored on the DVD ROM to display theposition and direction of the vehicle. The systemalso includes a gyroscope and a speed sensorthat enable it to display the present position evenin locations where the GPS signals may beblocked.

Memory point mark

Map matchingSince GPS navigation has an error of 100 – 655feet (30 m – 200 m), the position of your vehiclemay be displayed off the road. Map matchingautomatically corrects this error so that theposition of your vehicle is displayed on the road.

DestinationThe point on the map thatis your destination isspecified and displayedwith the destination icon.You can set up to 5destinations for the samejourney.

RouteWhen a destination isinput, the navigationsystem automaticallycalculates a route anddisplays it in blue on themap.

Current vehicleposition

Destination icon

Route(Blue)

7

EN

Features

• Automatic Route CalculationJust select the destination and your navigationsystem does the rest, automatically searchingfor the route you need.

• Real Time Voice GuideA voice guide informs you of the distance anddirection until your course changes, givingadvice timed to match road conditions.The VOICE button lets you repeat the last voiceguide when needed by just pushing the button.The voice guidance may not be given if thevehicle’s present position is too near thedestination.

• Dual-screen DisplayTwo different maps or guidance screens can bedisplayed simultaneously. For example, the mapscreen and the arrow-guide screen, or the mapscreen and the motorway screen.

• Direct Inputting of PhoneNumberBy inputting the phone number of a memorypoint you have stored, the system can searchfor it as the destination.

• Voice Guidance and 3-D JunctionView Display at an Exit orJunction on MotorwaysWhen you approach an exit or junction on themotorway, the system gives you voice guidanceusing the same name as shown on the roadsignboards. An exit or junction is shown on thedisplay in real appearance.

• Map ZoomingYou can change the map display in 14magnification scales (50,100, 200, 400, 800,1.6K, 3K, 7K, 13K, 20K, 50K, 100K, 200K and400K metres) to show more detailed or widerviews by pressing the 3 or 4 button on theremote control.

• Direct Input of Name of Place ofInterestInput only the name of a place of interest(without inputting the city name) to search forthe route to the place of interest.

• Eight Languages Selectable forthe Voice GuidanceYou can choose one of the eight languages

(English, German, French, Italian, Dutch,Spanish, Swedish or Danish) for the voice routeguidance.

• Multiple-Destination SettingYou can set up to 5 destinations in any orderyou like for the same journey.

• Intersection ZoomAs you near intersections and cross points, themap display automatically zooms in to show amore detailed view that you will need. Thismeans there is no need to press the zoombuttons.

• Built-in Gyroscope and SpeedSensorsThe gyroscope for sensing direction and thespeed pulse sensor for detecting distanceprovide data which allows the vehicle positionand direction to be displayed even in locationswhere the GPS signals cannot be received suchas between high buildings or in tunnels.

• Motorway Information DisplayWhen you travel on motorways, the basicguidance display (with an arrow) automaticallyshows the distances to the next fuel station/restaurant/parking/junction (except exit).

• Built-in RDS-TMC ReceiverReal time traffic information from the TrafficMessage Channel (TMC) will be automaticallyreceived. In the event of a traffic jam or trafficrestriction, etc., you will be informed by voiceand visual guidance.

TMC traffic information is already broadcast inGermany, UK, France, Italy, Belgium (Flandersregion), Denmark, the Netherlands, Spain,Sweden and Switzerland.This service will soon be available in Austria andBelgium (Wallonia region).•RDS-TMC information may not be received

depending on FM radio reception conditions.

• Two Types of OperationThe operation for the navigation system can beperformed with both the supplied remote control(RUE-4141) or touch button.*

* Touch button operation can be performed only when youconnect to Alpine Touch panel-compatible monitor IVA-D300R, IVA-D300RB or TME-M770, etc. For details, referto “Touch operation” on page 10. See also the Owner’sManual of the touch panel-compatible monitor.

Before Using The System

8

1

Before Using The SystemRewriting operating system programme

If a different version of the map disc is used withyour navigation system, the operating systemprogramme installed will be rewritten automaticallyto read this SMART MAP PRO disc.

Insert this SMART MAP PRO discinto the NVE-N099P. (For removingand inserting procedures, refer tothe Owner’s Manual of the system.)

The system starts rewriting of the operationsystem programme. While the programmeis being rewritten, do not turn the power offand on to the system, or do not eject thedisc.

Note:For the locations and functions of the remotecontrol’s buttons, see pages 52 and 53.

2 The opening screen appears in thedisplay.

9

EN

Switching the display on or offAfter you have read this importantinformation, select “I agree” andpress the ENTER button.

The map screen is displayed.

To turn off the display monitor,press the ON/OFF button on theremote control.

When you press the ON/OFF button again,the display monitor is turned on and theopening screen is displayed.

Tips:• If there is no disc in the navigation system,

“No DVD. Please insert map DVD.” isdisplayed. For details on how to load orremove the disc, refer to the “Inserting theDVD-ROM” and “Removing the DVD-ROM”sections in the manual for the navigationsystem.

• If the inserted disc cannot be read, the“Unable to read data. Check if map DVD iscorrect.” message is displayed. Load thecorrect disc.

• If the monitor is kept on with the engine offfor an extended period of time, the batterymay discharge.

With the Alpine navigation system, when theignition key is turned to ACC or ON and thedisplay monitor is set in navigation display modeor external input display mode, the openingscreen will be automatically displayed.For operation of the remote control, see pages 52and 53 and the Owner’s Manual for your system.

After the opening screen isdisplayed, important informationsaying “CAUTION” and the languageselection menu are automaticallydisplayed.There are eight languages to choosefrom. Select (highlight) your desiredlanguage for the picture/voiceguidance and texts by tilting thejoystick on the remote control, thenpress the ENTER button on the topof the joystick to execute theselection. The important informationchanges to the selected language.Be sure to read the importantinformation.

Language selection menu

1

2

3


10

Ex.1

Touch operationIf the navigation system is connected to Alpine touch panel-compatible monitor IVA-D300R, IVA-D300RB or TME-M770, etc., touch operation can be performed by directly touching the monitor.

Touch Button Operation

Touch “ ” to display the mainmenu.

Notes:•Be sure to touch the button lightly with the pad of your finger on the display to protect the display.• If you touch a button and there is no reaction, remove your finger from the display once, and try again.•Touch buttons that cannot be operated appear dull in colour.

L Remote Control and Touch Button OperationThis manual explains operation using the remote control. Operate the touch panel as you would thejoystick or ENTER button on the remote control. In addition, the touch buttons that are displayed on thelower part of the screen are provided only for touch panel use. These buttons function the same as theshortcut buttons on the remote control. For details, refer to the comparison table of the remote controlbuttons and the touch buttons, on page 53.

Remote Control Operation

Press the MENU button on theremote control to display the mainmenu.

Touch Button Operation

11

EN

Touch “Destination” from the mainmenu.

Touch on the display and scroll themap. Align a desired point in thecentre of the map by touching“ ”. The point setting menuappears.

Note:Touch operation is described as “Touch.”

Select (highlight) “Destination” fromthe main menu by tilting the joystickon the remote control and press theENTER button on the top of thejoystick.

Search for a desired destination byscrolling the map with the joystick.The map scrolls in the direction inwhich the joystick is tilted. Bring thedestination point on the map underthe reticule icon and press ENTER.The point setting menu appears.

Ex.2

Ex.3


12

TMC indicatorFor details, see page 43.

Distance to the destination.

Estimated required time.1 25

h min : Estimated remaining time beforearrival

9:30 : Anticipated arrival time

Point setting menu on or off.For details, see page 14.

Once the route setting has been performed andtravelling started, the navigation system providesthe driver all of the major route information withreal time voice directions and guidance displays.You can manually select the desired guidancedisplays for your convenience.

The Current Vehicle Position Display isautomatically displayed when travelling starts.Pressing the 4 or 3 button on the remote controlwhile the map is being displayed the map will bezoom in or out. To return to the current vehicleposition screen display from other screendisplays, press the POS. button.

How to switch the map displays

L 3-D Display for Motorway Junction

Motorway junction

L Dual - Screen Display

Right screenLeft screen

L Current Vehicle Position Display

ScaleThe distance between thearrows on the screen is400 metres ( mile).1

4

←→400 mMap orientationShows the map orientation for up onthe current map.

: North up

: Heading up

(The arrowhead shows the direction ofnorth. To change the map orientation,see page 14.)

GPS signal stateNo icon:No satellite information being receivedor satellite signals are being calculated.Icon is displayed:Receiving GPS signals(in 2-dimensional or 3-dimensional). Information on the next intersection.

Current vehicle position icon.

Route.

Current time display.

Street name.

Note:Applicable to some areas in Germany, UK, France,Belgium, The Netherlands, Luxembourg and Italy.

Touch buttons are used only for touch operation(These buttons are lit when you press the correspondingbutton on the remote control.)

L Point Display

Distance in a straightline from the currentvehicle position.

Reticule icon

L Zoomed Intersection Map DisplayDuring navigation, when your vehicle approaches anintersection, the Zoomed Intersection Map of thatintersection is displayed. This enlarged Intersection Mapgives you further information via voice guidance.(Sometimes, the enlarged crossroads map is displayedeven when you are going to go straight.)

Ordinary Road:Name of next roadahead.Motorway:Name of next junctionahead.

Distance to the intersection(Red point on the route)

3D landmark iconFor details, see page 15.

13

EN

Main menu and sub-menuUse the main menu to select a variety of thesystem’s functions. Select (highlight) a desiredmain menu item and press the ENTER button.The sub-menu for the selected main menu itemautomatically appears in the display.

Press the MENU button on theremote control to display the mainmenu when the navigation system ison.

For the locations of the buttons on theremote control, see pages 52 and 53.

Tilt the joystick to select (highlight)a desired main menu item.

Make sure that the desired mainmenu item is highlighted, then pressthe ENTER button on the top of thejoystick to execute the selection ofthe menu item.

The display shows the sub-menu forthe selected main menu item.Highlight (select) a desired sub-menu item by tilting the joystick andpress the ENTER button.

The screen example shows when“Destination” is selected.

Searching country(For details, seepage 16.)

Note:Press the POS. button to return to the currentvehicle position screen.

1

The main menu appears on thedisplay.2

3

4

Register frequently used memory points in Quickaccess points (1 through 5) for easy selection of asingle button to set your destination. (For details,see page 28.)

Register your home for easy selection of a singlebutton to set your destination. (For details, seepage 28)

These arrows indicate that the list contains furtherpages. The number indicates the page. To scrollthe page of the list, select “ ” or “ ” by tilting thejoystick and press ENTER.


14

When a desired point is searched for using theDestination or Memory points menu etc. and themap for the point area is displayed, the pointsetting menu is displayed. This menu is very

Point setting menuuseful when you set the searched point as adestination or memory point.After selecting a menu item, press ENTER.

When the ENTER button is pressedwhile a map screen without thepoint setting menu is displayed

a SCALE: The scale screen is displayed by selecting thismenu. You can change the map scale by selecting (zoom in) or (zoom out) and pressing ENTER within2 seconds. For details, see page 15.

b Change: Select this menu when you want to change theconditions in searching for a route, such as motorwaypreference.

c Enter: Use this menu when you set the point as adestination or an additional destination, and calculatethe route.To set the selected point as an additional destination,select “Enter” from the point setting menu and pressENTER. The Add destination menu appears, select“Add” and press ENTER.Select “Replace” and press ENTER to replace thecurrent destination with a new one.

d : Select to turn the point setting menu display off.You can scroll the map manually with the joystick.

: Select to display the point setting menu.

e Info.: Choose this menu when you want to get someinformation about the point such as address, phonenumber, etc. when the point is searched for using POImenu.

f Enter: Use this menu when you set the point as amemory point.

g Map orient.: Select this menu when you want to changethe map orientation for the current map display.

h : This menu appears only when multipledestinations are set. Use it when you specify the desireddestination.

i Screen configuration: The screen configurationselection menu is displayed by selecting this menu. Youcan select from various map displays. (For details, seepage 34.)

j POI: Use this menu when you want to display the POIicons on the map or to display the “Local POI list” for thedisplayed POIs.

k Route: Choose this menu when you want to change toanother route (this menu is displayed only when theroute has already been set).

l Mark: You can store the point as a memory point.

When the point map is displayedusing the Destination menu

When the point map is displayedusing the Memory points menu

a

b

cd

a

d

e

f

a

d

h

i j k

l

g

e

15

EN

1

Change the map scale

Notes:•The 3D landmark icon cannot be displayed

on the map when map scale is more than400m.If you select the 3D landmark icon on themap by tilting the joystick and press ENTER,the point setting menu appears.For details of the point setting menu, seepage 14.Touch: In the case of touch operation, touchthe 3D landmark icon.

•The local POI icon cannot be displayedwhen map scale is more than 800m. Fordetails, see page 26.

1

2

Change the map magnification ratio upwards ordownwards (in 14 steps).

L Remote control operation

Press the 4 or 3 button whiledisplaying the map screen.Each press of the button changesthe map scale. This changes rapidlyby pressing and holding eitherbutton.

L Touch operation

Touch on the screen to displaythe point setting menu.

Touch “ (SCALE)” Change themap magnification ratio by touching“ (zoom in)” or “ (zoom out)”within 2 seconds. This changesrapidly by pressing and holdingeither button.


16

Deciding the routeBasic Operation

Searching country(This example shows when Germany is selected.)

The Destination search menuautomatically appears. Select“Address” from the Destinationsearch menu by tilting the joystickand press the ENTER button.

1

There are three procedures to decide anappropriate route to your desired destination;searching for the location, searching for the route,and deciding the route.This section describes the operational procedureswhen a destination is searched for using itsaddress as an example.

Press the MENU button on theremote control to display the mainmenu.

Select (highlight) “Destination” fromthe main menu by tilting the joystickon the remote control and press theENTER button on the top of thejoystick.

2

3

Tips:•When 1 character is input, the candidates

for the next character are narrowed down.•Selecting “/” returns to the previous

numeral and erases it.

When the street name inputtingshave been completed, the list of theinput street names appears. Selectthe desired street name by tilting thejoystick and press ENTER.

5

4

Note:When you search for a location in anothercountry (area), you should change the searchcountry (area). In this case, select “Countryinitial (D, GB, etc.)” by tilting the joystick, andpress ENTER. The Search area menuappears, select the desired area (country) bytilting the joystick and press ENTER. (Selectthe “ ” or “ ” indicator on the display andpress ENTER to scroll the area list.) Whenyou have selected the desired area, choose“OK” by tilting the joystick and press ENTER.

The street or city name inputalphabet table automaticallyappears. Tilt the joystick to selectthe desired character for the firstposition of the street name andpress ENTER. The input characterappears at the first position of thetext window. Repeat this procedureto input the entire street name.

17

EN

8

6

Tips:You can search for a location from variousitems as shown below.

Current vehicle position

Note:If there are other streets with the same namein other cities when the desired street name issearched for in “All cities” mode, the list of thecity names will be displayed. Select thedesired city name and press ENTER.

The house number input tableappears automatically. Input thehouse number in the same manneras step 4 above. When the housenumber inputtings have beencompleted, select “OK” by tilting thejoystick and press ENTER.

When you start driving this route,the system displays the map withthe current vehicle position andbegins guidance.

The system starts calculation of theroute. When the calculation iscompleted, the whole route androute menu are displayed. Select“Guide” by tilting the joystick andpress ENTER.

The map showing the area of theinput address with the point settingmenu appears. Select “Enter” bytilting the joystick and press ENTER.

7

9

Searching from Page No.

Address P22POI P24Postcode P25Local POI P26Telephone number P27Memory point P28Quick access point P28Home P28Previous destination P29Intersection P29Motorway entrance/exit P30Previous starting point P30Coordinates P31Map P31

Basic Operation

18

2

Selecting from the route menu (three routes searching)The system calculates up to three routessimultaneously including the recommended route.You can choose any one of the routes.

When you have selected a desireddestination, the navigation systemcalculates up to 3 routes and thesystem automatically displays the“All-route” screen and route menu.

The route menu items:

a Guide: Starts the route guidance.

Note:If you want to view the drive simulation tocheck the details of the route, select “Guide”then press and hold the ENTER button for atleast 5 seconds while the whole route screenis displayed. (For more information, see page49.)

1

Select the desired route menu itemand press ENTER.

a Route: Displays the Change route screen.For details, see page 36.

The list showing information about the distance andrequired time to the destination is displayed.

a 3 routes: Displays the 3 Routes screen.Select a desired route by tilting the joystickand press ENTER.

19

EN

2

3

Suspending or resuming theroute guidance

Erasing the routePress the MENU button to displaythe main menu.You can very easily suspend the route guidance

temporarily and resume it.

Note:The route information remains in memory even if theroute is cancelled. To erase the route informationdelete the destination, see “Erasing the route” (nextsection).

Press the MENU button to displaythe main menu.

1-02-2

Note:When the guidance is suspended, the mainmenu automatically changes to show“Resume guidance.”

To resume the route guidance,select “Resume guidance” in themain menu by tilting the joystickand press ENTER.

To temporarily suspend the routeguidance, select “Suspendguidance” in the main menu bytilting the joystick and press ENTER.

3

2

1Select “Route overview” from themain menu by tilting the joystickand press ENTER.

The “Route overview” screenappears. Select “Route” by tiltingthe joystick and press ENTER.

1

(To be continued)

Basic Operation

20

4 Registering your homeRegister your home first. When your home isregistered, you can recall it very quickly andsetting the route for returning home is simple.

Press the MENU button to displaythe main menu.

The “Change route” screen appears.Select “Delete” and press ENTER.

Note:If multiple destinations are set, the “Deletedestination” screen showing the list of thedestinations appears. Select the destination tobe deleted (or “Delete all” to delete alldestinations) by tilting the joystick and pressENTER.

The confirmation dialogue messageappears. Select “Yes” by tilting thejoystick and press ENTER if youwant to delete the destination(s) androute.

5

The sub-menu appears. Select“Register” by tilting the joystick andpress ENTER.

Select “Memory points” from themain menu by tilting the joystickand press ENTER.

1

2

3

21

EN

8

7

5

To search for your home location,select the searching methoddescribed in the Searching for aDestination section on page 22.

When the map showing the area ofyour home is displayed, Select“Enter” by tilting the joystick andpress ENTER.

Note:You can register only one home.

Select “OK” by tilting the joystickand press ENTER.

4

6

9

The “Memory point” screen appears.Select “Attribute” by tilting thejoystick and press ENTER.

The “Change attribute” screenappears.Select “ ” by tilting the joystickand press ENTER.

Note:You can change icons or names displayed onthe map.For details, see page 40.

Press the POS. button to return tothe current vehicle position map.

22

Searching For Destinations

2

Searching for a destination from its address


If you know the address of the desired destination,you can easily display that point on the map byjust inputting the address.

Press the MENU button to displaythe main menu. Select “Destination”from the main menu by tilting thejoystick and press ENTER.

The sub-menu for Destinationscreen appears. Select “Address”by tilting the joystick and pressENTER.

a

d

e

c

b

a Text windowsDisplay the selected characters/numerals.

b ListDisplays a list of the candidate names forthe selected characters/numerals.

c /

Returns to the previous character/numeraland erases it.

d Character with diacritical mark/numericpalletSelect the desired pallet.

e Number of candidates

Tips:•When 1 character/numeral is input, the

candidates for the next character/numeralare narrowed down (and the others areshaded).

•You can also search for a location byinputting just the start of its name andselecting “List” and pressing ENTER.

• If the number of candidate locations isnarrowed down, the list of the candidatelocations will be displayed automatically.Select the desired location from the list andpress ENTER.

• If you want to display the list of candidatestreet names, select “List” and pressENTER.

When “City” is selected and ENTERis pressed, the city selection menuappears. Select the desired menuitem.

•When “Input city name” is selected, inputthe city name and press ENTER.

•When “5 near cities” is selected, the namesof 5 near cities appears in the display.Select the desired city name and pressENTER.

•When a city name is directly selected fromthe list displayed, press ENTER.

•When “All cities” is selected, the characterinput pallet will be displayed. Input the cityname.

•When “Input post code” is selected, thepostcode input pallet will be displayed.Input the postcode.

Notes:• If your destination is located in other country

than that currently selected one, be sure tochange the searching country.

•To change the searching country, choose“Country initial (D, GB, etc.).” The menuappears, select the desired searchingcountry.

The street name input table for thedestination appears. Select thecharacter for the first position of thestreet name by tilting the joystickand press ENTER. The enteredcharacter appears at the firstposition of the text window. Repeatthis procedure to complete thecharacter inputtings of the streetname.

1

3

23

EN

6 The map screen showing theselected area with the point settingmenu appears.

Note:For details of the point setting menu, seepage 14.

The list of street names will bedisplayed. Select the desired streetname and press ENTER.

2-00-3

Notes:•Your desired destination can be searched

for more precisely by inputting the housenumber.

•The house number can also be input usingthe numeric keypad on the remote control.For operation, see the Remote ControlReference Guide page 52.

• If there is no house number or no data in thedisc, the system displays the map showingthe area of the input street name.

Notes:• If there are other streets with the same

name in other cities when the desired streetname is searched for in “All cities” mode,the list of the city names will be displayed.Select the desired city name and pressENTER.

• If there is no location with the input spelling,locations with similar spelling are displayed.

The house number input tableappears. Input the house number inthe same manner as for inputtingthe street name (step 3 above).When the house number inputtingshave been completed, select “OK”by tilting the joystick and pressENTER.

4

5

24


Searching for a point of interest (POI)If you know the name of the desired point ofinterest (POI), you can easily display that point ofinterest on the map by just inputting its name.

Press the MENU button to displaythe main menu. Select “Destination”by tilting the joystick and pressENTER.

The sub-menu appears. Select “POI”by tilting the joystick and pressENTER.

There are three ways in searchingfor your desired POI. The Input POIname screen with the characterinput table appears.

• By inputting the name:1. Input the name of a POI you want to search for

by tilting the joystick and pressing ENTER inthe same manner as inputting the street name(see page 22).

• From the city name1. Select “City” by tilting the joystick and press

ENTER. The city selection menu appears,select the desired menu item.

• From the category1. Select “Category” by tilting the joystick and

press ENTER.2. The category selection menu appears. Select

the desired category by tilting the joystick andpress ENTER.

• When “List all categories” is selected, allcategories are displayed in the list. Select thedesired category and press ENTER.

• If the category is not selected, any or allcategories can be set.

Note:If you select “Name,” “Category” or “City,” youcan narrow down the number of thecandidates.

The map screen showing the area ofthe selected POI and the pointsetting menu appears.


• When “Input city name” is selected, input thecity name.

• When “5 near cities” is selected, the names of 5near cities appears in the display. Select thedesired city name and press ENTER.

• When a city name is directly selected from thelist displayed, press the ENTER button.

• When “All cities” is selected, the character inputpallet will be displayed. Input the city name.

• When “Input post code” is selected, the postcode input pallet will be displayed. Input thepostcode.

Select “List” by tilting the joystickand press ENTER. The list of thecandidate POIs and the number ofthe POIs appear. Select the desiredPOI by tilting the joystick and pressENTER.

1

2

3

4

5

25

EN

5

4

3

Searching from postcodeYou can search for a destination by inputting thepostcode. (This function may not be used in someregions.)


The sub-menu appears.Select “Post code” by tilting thejoystick and press ENTER.

The postcode input screen appears.Input the desired postcode by tiltingthe joystick.

Tips:•When 1 character/numeral is input, the

candidates for the next character/numeralare narrowed down (and the others areshaded).

•Selecting “/” returns to the previouscharacter/numeral and erases it.

• If you want to display the list of candidatepostcode, select “List” and press ENTER.

The inputted postcode list isdisplayed. Select a desired postcodeand press ENTER.

2

1

The map screen showing theselected area with the point settingmenu appears.


26


2

1

Setting the local point icondisplay

The system can display on the map the icons forthe points of interest such as petrol stations,restaurants, parking lots, etc.

While a map screen is beingdisplayed, press ENTER.

Touch:In the case of touch operation, touch “ ”.

The point setting menu appears.Select “POI” from the point settingmenu by tilting the joystick andpress ENTER.

The show POI icons screen isdisplayed. Select a desired POI iconby tilting the joystick and pressENTER.

Notes:• If you want to display multiple icons, select

“More” by tilting the joystick and pressENTER. Then, select the desired icons oneby one. When all selections have beencompleted, select “OK” and press ENTER.

•You can set up to 5 POI icons.• If you select “POI off,” the POI icons do not

appear on the map.•POI icons cannot be displayed if the map

scale is more than 800m.• If you select the POI icon on the map by

tilting the joystick and press ENTER, thepoint setting menu appears.The “Info.” menu of the point setting menu isdisplayed only for 5 seconds.For details of the point setting menu, seepage 14.Touch: In the case of touch operation, touchthe POI icon.

3

Searching for the local POIsusing the their icons

The system can search for the POIs in a range of30 km (19 miles) around the reticule icon andwhen POI icons are set you can display their iconswith the distance to the POIs. The system canalso display only the POIs along the set route.


The sub-menu appears. Select“Local POI” by tilting the joystickand press ENTER.

The Local POI icons screen appears.Select a desired POI icon by tiltingthe joystick and press ENTER.

1

2

3

4 The list of the desired Local POIicons screen appears. Select the POIicon by tilting the joystick and pressENTER.

27

EN

2

When this menu is selected, the systemcan list the POIs along the set route.

You can sort the list by distance, icons or names.

5 Select “List” by tilting the joystickand press ENTER.

Note:If you want to add a local POI, select “OK”and press ENTER, then repeat step 3 to 4.

The list of the Local POIs appears.

Notes:•You can sort the list by distance, icons or

names.•You can list up to 200 places to display.

Select the desired local POI bytilting the joystick and press ENTER.The map showing the area of theselected POI with the point settingmenu appears.


6

7

Searching from Telephonenumber

If you have input phone number in your memorypoints, you can easily display a desired memorypoint as your destination by just inputting thephone number. For inputting phone numbers forthe memory points, see page 41.


The sub-menu appears. Select“Telephone number” by tilting thejoystick and press ENTER. Thenumeric input table appears.

Input the phone number includingthe area code by tilting the joystickand pressing ENTER. (For details ofinputting number, see step 5 onpage 23.)When the desired phone numberhas been input, select “OK” andpress ENTER.

Tips:•The phone number can also be input using

the numeric keypad on the remote control.For operation, see the Remote ControlReference Guide page 52.

•When 1 numeral is input, the candidates forthe next numeral are narrowed down (andthe others are shaded).

•Selecting “/” returns to the previousnumeral and erases it.

The area map of the location withthe input phone number is displayedwith the point setting menu.


1

3

4


28

Searching from memorypoints

If memory points have already been registered,you can call them out with a simple operation andchoose a desired location as the destination. Fordetails on the registration method, see page 39.

Press the MENU button to displaythe main menu. Select “Destination”from the main menu by tilting thejoystick and press ENTER. Select“Memory point” from the sub-menuby tilting the joystick and pressENTER.

The list of the memory points isdisplayed. Select the memory pointyou wish to display by tilting thejoystick and press ENTER.

The reticule icon appears at theselected memory point on the mapwith the point setting menu.


Searching by Quick accesspoints

If quick access points have already beenregistered, you can call them out with a simpleoperation and choose a desired location as thedestination. For details on the registration method,see page 41.


1

2

3

1

2

3

The sub-menu appears. Select thedesired quick access point icon bytilting the joystick and press ENTER.

The reticule icon appears at theselected quick access point on themap with the point setting menu.


Searching for homeIf your home has already been registered, you cancall it out with a simple operation. For detailsabout the registration method, see page 20.


The sub-menu appears. Select“Home icon” by tilting the joystickand press ENTER.

1

2

Quick access point icons

The reticule icon appears at theselected home point on the mapwith the point setting menu.


3Home icon

29

EN

This bar indicates that there is a continuation of thelist. To scroll the list, select “Arrow” by tilting thejoystick and press ENTER.“ ” or “ ”: Scrolls the list page.“8” or “9”: Scrolls the list one by one.

The system automatically stores up to 99locations the system have searched for asdestinations.


The sub-menu appears. Select“Previous destination” by tilting thejoystick and press ENTER.

The list showing the destinationsstored in memory is displayed.Select the desired destination fromthe list by tilting the joystick andpress ENTER.

1

2

4

3

The map of the selected destinationappears with the point setting menu.

Notes:•For details of the point setting menu, see

page 14.•The stored location in memory can be

erased. For details, see page 42.• If the destination was searched from Home

or a Quick access point, the point is notrecorded in the previous point list.

Searching from intersectionIf you know an intersection near where you wantto go, you can input two cross streets as yourdestination. This section describes how to locate adestination by entering two cross street names.

Press MENU button to display themain menu. Select “Destination”from the main menu by tilting thejoystick and press ENTER.

The sub-menu appears. Select“Intersection” by tilting the joystickand press ENTER.

The intersection input table for the1st street name and 2nd street nameappears. Input the 1st street nameby tilting the joystick and pressingENTER in the same manner as forinputting the address for SearchingFor Destinations (step 3 on page 22).

The 2nd street name input tableappears. Input the 2nd street name.

Note:When the 1st street name is input, thecandidate for the 2nd street name is narroweddown.

When two street names have beeninput, the map screen showing thearea of the selected intersectionwith the point setting menu appears.


1

2

3

4

5

Searching from previousdestinations searched

If you select this area of the screenand press ENTER, you can easilycall out the start point when youwant to return to the start point. Fordetails, see page 30.


30

5

6

7Searching from motorwayentrance/exit

You can search for a location from the motorwayentrance or exit.


The sub-menu appears. Select“Motorway entrance/exit” by tiltingthe joystick and press ENTER. TheMotorway Ent./Exit input palletappears.

Input the desired motorway name bytilting the joystick and press ENTER.

When the inputtings of themotorway name have beencompleted, the list of the inputmotorways appears. Select thecorrect motorway by tilting thejoystick and press ENTER.

Note:When the number of candidates narrowsdown, the list of candidates is displayedautomatically.

The “Motorway Ent./Exit” screenappears. Select “Entrance” or “Exit”as desired by tilting the joystick andpress ENTER.

The list of the entrances or exits ofthe selected motorway appears.Select the desired entrance or exitby tilting the joystick and pressENTER.

The map showing the area of theselected entrance or exit of themotorway with the point settingmenu is displayed.


Searching from start pointWhen a route has been set, the start point of theroute is stored in memory. You can easily call outthe start point when you want to return to the startpoint.


The sub-menu appears. Select“Previous destination” by tilting thejoystick and press ENTER.

The previous points screen appears.Select “Previous starting point” bytilting the joystick and press ENTER.

1

2

34

The map showing the previous startpoint and the point setting menuappears.


1

2

3

4

The screen appears to input theentrance/exit name.

You can sort the list.Dist. sort: sort in order of nearestentrance or exit of a motorway.Name sort: sort in order of name.

31

EN

5

Searching by scrollingdisplayed map

The displayed map can be freely scrolled with thejoystick in eight directions to search for a desireddestination.The best way to find a location is first to displaythe wide range map and specify the approx.location. You can find the desired locationefficiently by specifying more and more detailedmaps. (Press the 4 or 3 button to change themap magnification.)

Search for a desired destination byscrolling the map with the joystick.The map scrolls in the direction inwhich the joystick is tilted. Bring thedestination point on the map underthe reticule icon and press ENTER.The point setting menu appears.

Notes:•For details of the point setting menu, see

page 14.•There are three map scrolling speeds,

depending on how long the joystick is tilted.•To return to the current vehicle position,

press the POS. button.•You cannot scroll the map by the joystick

while displaying the point setting menu.

1

Searching from CoordinatesIf you know the latitude and longitude of thedesired location, you can display that location byjust inputting those numbers.


The sub-menu appears. Select“Coordinates” by tilting the joystickand press ENTER. The Latitude andLongitude input pallet appears.

Select “N” (North) from the Lat.(Latitude) by tilting the joystick andpress ENTER. Input the NorthLatitude by tilting the joystick andpressing ENTER.

Select “W” (West) or “E” (East) fromthe Long. (Longitude) by tilting thejoystick and press ENTER. Input theLongitude by tilting the joystick andpressing ENTER. When the desiredLatitude and Longitude has beeninput, select “OK” and pressENTER.

The map screen showing the area ofthe selected coordinate with thepoint setting menu appears.


4

3

2

1

32

Route CheckingOverviewing the searched route

We recommend that before you begin driving theroute, you look at the entire route in the overviewdisplay.

Press the MENU button to displaythe main menu. Select “Routeoverview” from the main menu bytilting the joystick and press ENTER.

The entire route is displayed on amap with a large enough view thatyou can view the entire route.

When you press the POS. button,the system return to the currentvehicle position map screen.

Goes to route editing mode.

This bar indicates that there is acontinuation of the list.To scroll the list, select “Arrow” by tiltingthe joystick and press ENTER.“ ” or “ ”: Scrolls the list page.“8” or “9”: Scrolls the list one by one.

1

2

3

Example of turn list

Activates routeguidance mode.

Displays the turn list (see the examplebelow).

Displays the map with your starting point ordestination(s). To register a point as a memory point,tilt the joystick to select “Mark” then press ENTER.

33

EN

Previewing the searched routeWhen this mode is selected, the reticule icon for the current vehicle position moves along the searchedroute so that you can preview the route. You can also search for the POIs along the route.

Press the MENU button to display the main menu. Select “Route preview” fromthe main menu by tilting the joystick and press ENTER.

The route preview screen with operation menu is displayed.

Select this menu to scroll the map using the joystick.

Select this menu to display the Edit route preview menu asshown below.

Select the desired menu to move the reticule icon alongthe route to go to the destination/POI selected or to returnto the current vehicle position.

Note:“Info.” menu appears for 5 seconds only when thereare POI icons along the route.You can display the POI information.

Press the POS. button to return to the current vehicle position screen.

Previews for a destination.

3

21

Searches for POIsalong the route.Select a POI first.

34

2

Guidance Screen ConfigurationGuidance map display

Your desired guidance map display modes can beselected for your convenience as follows.


Touch:In the case of touch operation, touch “ . ”

The point setting menu appears.Select “Screen configuration ( )”by tilting the joystick and pressENTER.

The Screen configuration selectionmenu is displayed. Select a desiredmenu item by tilting the joystick andpress ENTER.

Note:The screen configuration selection menu isdisplayed also by pressing the button onthe remote control.

Screen configuration menu

a b c d e f

a Single screen display

b Dual-screen display

c Current vehicle position informationdisplay

d Turn list display (Displayed only whendriving on the route.)

e Arrow screen display (Displayed onlywhen driving on the route.)

f Motorway information display(Displayed only when driving on amotorway.)

1

3

35

EN

7

3

Dual-screen display

Notes:•To change the map orientation, select “Map

orient.” menu by tilting the joystick andpress ENTER. Each pressing of ENTERtoggles between north-up and heading-upmodes.

•To display the set local POI icons, select“Show POI icons” by tilting the joystick andpress ENTER. If a local POI icon(s) is notdisplayed, this menu cannot be selected. Todisplay a local POI icon(s), refer to page 26.

•To display the set RDS-TMC icons, select“Show RDS-TMC info.” by tilting the joystickand press ENTER. When “Show RDS-TMCinfo.” in Setting the RDS-TMC (see page 43)is set to OFF, this menu cannot be selected.

•To change the map magnification range,press the 4 or 3 button.Touch: In the case of touch operation, touch“ (zoom in)” or “ (zoom out)”.

• If a map that is bigger than 800m scale isbeing displayed, the POI icons cannot bedisplayed. In this case, change to a detailedmap by pressing the 3 button.

When the settings have beencompleted, select “OK” by tilting thejoystick and press ENTER to returnto the current vehicle position map.Now, the system displays twodifferent screens.

The Edit right screen menu appears.

1

2

4

5

6The system can display two different screenssimultaneously for your convenience. Forexample, a detailed map and a wide range mapcan be displayed at the same time so that you canview a detailed map around the present vehicleposition and a wide range map along the route.


Touch:In the case of touch operation, touch “ . ”

The point setting menu appears.Select “Screen configuration ( )”by tilting the joystick and pressENTER.

The Screen configuration selectionmenu appears (see page 34). Select“ ” by tilting the joystick andpress ENTER.

Note:The screen configuration selection menu isdisplayed also by pressing the button onthe remote control.

The System changes to dual-screenmode and displays two screenssimultaneously.

To change display mode of the rightscreen, press RIGHT MAP button.

Touch:In the case of touch operation, touch the rightscreen.

36

6

7

3

2

3

Route EditingAdding destinations

1

2

4

5

When the settings have beencompleted, select “Guide” by tiltingthe joystick and press ENTER.

1

4

5

6

The “Route on search condition”screen appears. Select “Guide” bytilting the joystick and press ENTER.

Note:To add more destinations (up to 5 in all),select “Route” then press ENTER, and repeatsteps 3 to 6. When you have set all thedestinations, select “Guide” and pressENTER.

Reordering destinationsThe sequence of the destinations to go can bechanged in any order you like.



The “Change route” screen appears.Select “Re-order” under“Destination” by tilting the joystickand press ENTER.

The list of the Input destinationsappears. Select the destinations oneby one in the desired sequence ofarrival by tilting the joystick andpressing ENTER.

When the sequence of thedestinations has been changed,select “OK” by tilting the joystickand press ENTER.

This operation is for setting multiple destinationsfor the same journey (up to 5).

Press MENU button to display themain menu. Select “Route overview”from the main menu by tilting thejoystick and press ENTER.


The “Change route” screen appears.Select “Add” under “Destination” bytilting the joystick and press ENTER.

The “Destination searching” screenis displayed. For details ofsearching for the desireddestinations, see pages 22 to 31.

When the map showing the area ofthe selected destination with thepoint setting menu is displayed,select “Enter” by tilting the joystickand press ENTER.

The “Add destination” screenshowing the sequence of thedestinations is displayed. Select“Add” at the place where the newdestination should be added bytilting the joystick and press ENTER.

37

EN

Deleting destinations

The confirmation dialog screenappears. Select “Yes” by tilting thejoystick and press ENTER. Theselected destination (or all of thedestinations) will be deleted.

Note:If all the destinations are deleted, the screenreturns to the current vehicle position.

When the sequence of thedestinations has been changed,select “OK” by tilting the joystickand press ENTER.

Select “Guide” by tilting the joystickand press ENTER.

1

2

3

4

5

6

7

Searching for a detour

Select the distance difference of thedetour. Tilt the joystick to select“1km,” “3km,” “5km” or “Wholeroute” and press ENTER. A detourwill be searched for.

Notes:•You can search for a detour only when your

are on a route.• “Around traffic” is displayed only when the

RDS-TMC information is received. Searchfor a congestion evasion route isautomatically started when “Dynamic nav.”is activated in the RDS-TMC setting. Tomanually start search for a congestionevasion route, select “Around traffic” andpress ENTER.

1

3

4

This section describes how to delete an inputdestination or all of the input destinations at thesame time.



The “Change route” screen appears.Select “Delete” under “Destination”by tilting the joystick and pressENTER.

The list of the Input destinationsappears. Select the destination youwant to delete by tilting the joystickand press ENTER.(If you want to delete all of thedestinations at the same time, select“Delete all” by tilting the joystickand press ENTER.)

Note:If only one destination is set, the list will notappear.

2

You can search for a detour around your currentposition on the route. If there is a construction siteahead, for example, search for a detour byselecting the distance difference from your currentposition.



The “Change route” screen appears.Select “Detour” by tilting thejoystick and press ENTER.

38

Route Editing

Setting the route optionsChanging the conditions forthe route searching

When the searching conditions havebeen specified, select “OK” bytilting the joystick and press ENTER.


1

2

3

4

5

6

When the editing for the routeoption has been completed, select“OK” by tilting the joystick andpress ENTER.


The selected item will be ticked.Ticked: AllowUnticked: Detour

6

5

4

3

2

1

You can change the conditions for the routesearching between the current vehicle position toa destination or only a portion of the route.



The “Change route” screen appears.Select “Search condition” by tiltingthe joystick and press ENTER.

The search condition list screenappears. Select the route betweenthe points to be edited and choosethe desired condition (Quick, Short,etc.) by tilting the joystick and pressENTER. You can specify thesearching condition for otherportions of the route as well.

The navigation system can search for 6 differenttypes of routes: using motorway, toll road, ferryand restricted road.



The “Change route” menu appears.Select “Road preference” by tiltingthe joystick and press ENTER.

The “Road preference” menuappears. Select the item to be editedby tilting the joystick and pressENTER.

39

EN

Memory PointsStoring locations in memory

Press the POS. button to return tothe present vehicle position screen.6

5

4

3

2

1

You can store up to 200 special points on the mapin memory, such as locations you go to frequentlyor scenic locations. The locations stored inmemory can be recalled quickly.

Press the MENU button to displaythe main menu. Select “Memorypoints” from the main menu bytilting the joystick and press ENTER.

The “Memory point” menu appears.Select “Register” by tilting thejoystick and press ENTER.

The “Register memory points” withthe searching menu appears. Searchfor a desired point. To search for apoint, see pages 22 to 31.

When the point searched for and thepoint setting menu is displayed,select “Enter” by tilting the joystickand press ENTER.

The “Memory point” screen isdisplayed. Select “OK” by tilting thejoystick and press ENTER.

Deleting the memory points

The confirmation dialogue messageis displayed. Select “Yes” by tiltingthe joystick and press ENTER toexecute the deletion.

Press the POS. button to return tothe current vehicle position screen.

Note:If a memory point that is registered in Attribute(as Home or a Quick access point) is deleted,the point will be automatically deleted fromAttribute as well.

1

2

3

4

5


The “Memory point” menu appears.Select “Delete” by tilting the joystickand press ENTER.

The list of the “Delete memorypoints” appears. Select the memorypoint to be deleted by tilting thejoystick and press ENTER.(To delete all of the memory pointsat the same time, select “Delete all”by tilting the joystick and pressENTER.)

40

Memory Points

4

a

d

e

f

The “Memory point” screen appears.Select the item to be edited by tiltingthe joystick and press ENTER.

a1a2

aIconYou can select an icon for the registered pointfrom a number of icons.

H Go to a1 Icon change.

bAttributeYou can register a registered point as Home or asa Quick access point (up to 5). It enables you toeasily select these points as a destination.

H Go to b1 Attribute Register and Change

Note:When you select “With sound” and pressENTER, the sound menu appears. Selectyour desired sound to be produced when youcome near the memory point. If the voiceguidance and the memory point soundhappened to come at the same time, thevoice guidance has priority.

b

c

cDel. (Displayed only whensomething is registered in attribute)You can delete a registered point from attribute.The point will not be deleted from memory point.

H Go to c1 Attribute Delete.

dNameYou can give a name to a registered point and setto show it or not.

H Go to d1 Name change.

eLocationThe location of a memory point can be moved.

H Go to e1 Location Change.

fPhone no.Phone number can be added to a registered point.

H See f1 Phone Number Change.

Icon ChangeSelect “Icon” and press ENTER.

The icon list appears. Select thedesired icon and press ENTER.

Editing the memory points

You can sort by the date, icons, names or attributes.

1

2

3

You can change the point marks, names, phonenumbers, etc. of the memory points. You can alsoregister a memory point as a Quick access point(up to 5), or as Home.


The “Memory point” menu appears.Select “Edit” by tilting the joystickand press ENTER.

The list of the memory pointsappears. Select the memory point tobe edited by tilting the joystick andpress ENTER.

41

EN

6

e3

Location ChangeSelect “Location” and press ENTER.

The location to be corrected isindicated by the reticule icon. Tiltthe joystick and move the map tothe correct location, press ENTER.

The point setting menu appears.Select “Enter” by tilting the joystickand press ENTER.

Phone Number ChangeSelect “Phone no.” and pressENTER.

The numeric input pallet isdisplayed. Select the desirednumeral and press ENTER. Repeatthis procedure to complete theediting.

e1e2

When the new phone number hasbeen input, select “OK” and pressENTER.

Tips:Phone Number Editing:You can search for a desired destination orpoint of interest using the phone number thatis input or edited here. (See page 27.)

When the editing has beencompleted, select “OK” by tilting thejoystick and press ENTER.


f1f2

Backspace Erases the previous numeral

f3

5

b1b2

When character inputtings havebeen completed, select “OK” andpress ENTER.

Note:To show the name, select “On” and pressENTER. If you do not want to show the name,select “Off” and press ENTER.

d1d2

Backspace Erases the previous character

d3

c1c2

Attribute Register and ChangeSelect “Attribute” and press ENTER.

The attribute menu appears. Selectthe desired number and pressENTER.

Attribute DeleteSelect “Del.” and press ENTER.

The confirmation dialogue messageis displayed. Select “Yes” and pressENTER.

Name ChangeSelect “Name” and press ENTER.

The character input pallet isdisplayed.Select the desired characters one byone and press ENTER each time youselect a character.

42

Memory Points

2

Deleting the stored previous destinationsPress the MENU button to displaythe main menu. Select “Setup” fromthe main menu by tilting the joystickand press ENTER.

The “Setup” screen appears. Tilt thejoystick to select “ ” or “ ” andpress ENTER, to scroll pages anddisplay “Previous point.”

The confirmation dialogue messageappears, select “Yes” by tilting thejoystick and press ENTER.


You can sort by the date or names.

Note:If the destination was searched from Home ora Quick access point, the point is notrecorded in the previous point list.

1

3

4

5

6

Tilt the joystick to select “Delete”under “Previous point” and pressENTER.

The “Delete previous point” screenshowing the list of the previousdestinations appears. Select theprevious destination to be deletedby tilting the joystick and pressENTER.(If you want to delete all of theprevious destinations, select “Deleteall” by tilting the joystick and pressENTER.)

43

EN

TMC

There is trafficinformation on theroute.(Receivinginformation of“Stationary Traffic,”“Traffic Jam,”“Accidents,”“Closed Road,”“Road Works” or“Danger” within30km ahead on theroute.)There is otherinformation on theroute.(Receivinginformation of“Road Conditions,”“Weather” or“Delays” within30km ahead on theroute.)There is informationoutside of the route.No information(No traffic snarl)

TMC OperationAbout the TMC indicator

This indicator displays the reception status.

While TMCdata available

Red

Yellow

Blue

No TMC dataavailable

Red/Grey

Yellow/Grey

Grey

Setting the RDS-TMCPress the MENU button to displaythe main menu. Select “RDS-TMC”from the main menu by tilting thejoystick and press ENTER.

RDS-TMC setting screen isdisplayed. Select each item with thejoystick, and press ENTER toexecute the setting.

CountryUse this to set the country.

“Auto”:The country is automatically set.

“Manual”:You can select a country from the country list.

StationYou can select the station from which youreceive information.

“Auto”:You can receive the information automaticallyfrom a station.

“Manual”:Select a desired broadcasting station (A list ofstations from which you can receiveinformation is displayed.)

Dynamic nav.This sets if you seek for dynamic route(seek for evasion route) or not.

Dynamic Route Seek (Seek forEvasion Route)If you set the “Dynamic nav.” ON, the route,you can seek for a route in consideration ofthe traffic event given through the RDS-TMC in the initial route seeking. If a newevasion route is found, the confirmationdialogue screen appears. If you select“Yes” by tilting the joystick and pressENTER, you can find a new route,considering the traffic event.

Note:If “Dynamic nav.” is set to ON, the eventevasion route automatically searches a fixeddistance. This can also be searchedmanually.For details, refer to the section “Searching fora detour” (page 37).

(To be continued)

3a

3b

3c

1

2

44

TMC Operation

3d

3e

Notes:•Thick arrows show the distance between

traffic events. These appear in red, orangeor yellow, depending on the kind of trafficevent.

Show RDS-TMC info.This sets if you display the RDS-TMC iconon the map or not.

Legend

Stationarytraffic

Traffic jam

Accidents

Closed road

Road works

Danger

Legend

RoadConditions

Weather

Delays

Parking

Information

Symbol Symbol

4

Displaying the Traffic eventinformation on route

Press the MENU button to displaythe main menu. Select “RDS-TMC”from the main menu by tilting thejoystick and press ENTER.

RDS-TMC setting screen isdisplayed. Select “Traffic on route”by tilting the joystick and pressENTER.

If there is any traffic event on theroute, the status information will bedisplayed in order of distance fromthe current position.

Notes:•Select “Map” and press ENTER to display

the map with the traffic event statusinformation.

•Select “Detail” and press ENTER to displaytraffic event status information details.

•Depending on the capital you are in (Paris,etc.) street name may be displayed as“Others.”


1

2

3

4

•The applicable section is between themarks shown on the road.

•There may be displayed a pale mark, whichmeans an estimated information instead ofconfirmed information.

•RDS-TMC icon can be displayed when themap contraction is between 50m and 13km.

Voice guidanceThe 10km and 800m in advance trafficevent information on the route is given byvoice guidance.

When each item is set the screenreturns to the current vehicleposition.

45

EN

Press the MENU button to displaythe main menu. Select “RDS-TMC”from the main menu by tilting thejoystick and press ENTER.

RDS-TMC setting screen isdisplayed. Select “All trafficconditions” by tilting the joystickand press ENTER.

The street name list for all trafficevents is displayed. Tilt the joystickto select the desired street nameand press ENTER.

1

2

3

4

5

2

3

1

23

4

Displaying all Receiving Trafficevent information

Touch:In the case of touch operation, touch “TMC.”

Tilt the joystick to select the desiredstreet name and press ENTER. Thestatus information of a traffic eventon the selected street is displayed inorder of distance from the currentposition.



•Select “Details” and press ENTER to displaytraffic event status information details.


Detailed display of trafficevent

You can display the detailed information of RDS-TMC icon displayed on the map.

Put the Reticule icon on the RDS-TMC icon displayed on the map withthe joystick and press ENTER.

Touch:In the case of touch operation, touch thedesired RDS-TMC icon.

The point setting menu is displayed.Select the “Info.” and press ENTER.

The Status information of a trafficevent is displayed on the screen.

Note:Select “Details” and press ENTER to displaytraffic event status information details.


Notes:•Select “Current Road” and press ENTER. If

there is any traffic event on the route, thestatus information in order of distance fromthe current position is displayed.

•Depending on the capital you are in (Paris,etc.) street name may be displayed as“Others.”

The status information of a trafficevent on the selected street isdisplayed in order of distance fromthe current position.



•Select “Details” and press ENTER to displaytraffic event status information details.


Displaying the TMC event listPress the TMC button to display theTMC event list.1

46

Customizing Setups

3g

How to change the setupsCustomizing Setups

Note:To go back to the original settings, select“Default.”

“Auto reroute”Turns on or off the automaticrerouting function when the vehicledeviated from the original route.

“Time zone”When “Change” is selected, the“Time zone” screen appears. Selectthe desired time zone and pressENTER. Also select “On” or “Off” fordaylight saving time depending onyour situation. When setting isfinished, select “OK” by tilting thejoystick and press ENTER to end thesetting procedure.

“Auto voice guidance”Turns the voice guidance on theroute on or off.

To scroll the page of the list, select “ ” or“ ” by tilting the joystick and pressENTER.

“Calibration”Use after adjusting the currentposition or changing tyres. Fordetails, see page 48.

“Distance”Selects km or miles.

Note:For English, you can select the distanceindications in either miles or km.For other languages, only kilometres are usedfor the distance indications.

“Estimated travel time”When “Change speed” is selected,the graphic screen appears in thedisplay. Select “;” or “:” of thedesired menu item and press ENTERto increase or decrease the averagespeed. When settings have beenfinished, select “OK” by tilting thejoystick and press ENTER to end thesetting procedure.

“Voice guidance in all modes”When the search screen, etc., isdisplayed during driving on theroute, you can turn the voiceguidance or guidance screeninterruption on or off.

“Border guidance”Displays the national flag of thecountry you have entered for about10 seconds when you cross theborder. Turn it on or off.

“Intersection guidance”Turns the display of the intersectionguidance on or off.

“Guidance screen on M-way”Turns the display of the 3-D junctionview at an exit or junction onmotorways on or off.

1

2

3a

3b

3c

3d

3e

3f

3h

3i

3j

Press the MENU button to displaythe main menu. Select “Setup” fromthe main menu by tilting the joystickand press ENTER.

The “Setup” screen appears. Selectthe desired item to be customizedby tilting the joystick and pressENTER.

47

EN

2

3n

3m

When the settings have beencompleted, select “OK” by tilting thejoystick and press ENTER.

Note:To return to the initial settings, select “Default”by tilting the joystick and press ENTER.

“Street name on scroll map”Tilt the joystick to set “On” or “Off”to show the street name of wherethe reticule icon is when the map isscrolled.

“Notify traffic restriction”Turns the display of the trafficrestrictions on or off.

“Est. Time to Destination”Selects “ (Estimated remainingtime before arrival)” or “(Anticipated arrival time)” of theEstimated required time display. Seepage 12 for details.

“Screen adjust”Use when you adjust the screenposition. For details, see nextsection.

“Previous point”Use to delete the previousdestination point. See page 42 fordetails.

“Map colour (day), (night)”Selects normal colour (1) or specialcolour (2 to 4).

Note:“day” means when the head lamps are off and“night” means the head lamps are on.

“GPS info.”GPS satellite information beingreceived is displayed on the screen.For details, see page 50.

3k

3l

3q

4

3p

3o

Screen position adjustmentFor some TV monitors that can be connected tothe navigation system, the screen display will beout of place. Adjust the display position to matchthe TV monitor you connect to the system.

Press the MENU button to displaythe main menu. Select “Setup” fromthe main menu by tilting thejoystick.

The “Setup” screen appears. Select“Adjust” under “Screen adjust” bytilting the joystick and press ENTER.

The screen position adjustmentscreen is displayed.

Adjust the display position by tiltingthe joystick.The display screen moves the way you tiltthe joystick.

Touch:In the case of touch operation, touch “;”, “:”,“8” or “9” on the screen.

When the adjustment has beencompleted, press ENTER.

Touch:In the case of touch operation, touch “OK”.

The screen is displayed at the adjustedposition.

1

3

48

Customizing Setups

6

7

1

2

3

When the correction has beencompleted, Select “Enter” by tiltingthe joystick and press ENTER.

Resetting after tyrereplacement

Resetting is required when the vehicle’s tyres arereplaced. Be sure to perform the followingresetting procedure when the vehicle’s tyres arereplaced.


The “Setup” screen appears. Select“Adjust” under “Calibration” bytilting the joystick and press ENTER.

The “Calibration” screen appears.Select “Tyre change” by tilting thejoystick and press ENTER.

The Direction calibration screenappears. Tilt the joystick to select“ ” or “ ” and pressENTER to correct the direction.

Vehicle position/directioncorrection

Others

Tilt the joystick in 8 directions tocorrect the position. When thecorrection has been completed,press ENTER.

Touch:In the case of touch operation, touch “Arrow”in 8 directions.

1

2

3

4

5 Select “Enter” by tilting the joystickand press ENTER.

If the actual position/direction of your vehicle andthe position/direction of the current vehicleposition icon on the map differ (for example, whenyou moved on a ferry boat), you can manuallycorrect the position/direction of the current vehicleposition icon with the following method.The system’s map matching feature automaticallycorrects the error when you drive the vehicleseveral miles in good GPS signal reception area.


The “Setup” screen appears. Select“Adjust” under “Calibration” bytilting the joystick and press ENTER.

The “Calibration” screen isdisplayed. Select “Pos./Direction”by tilting the joystick and pressENTER.

49

EN

Adjusting the volume level forthe navigation system

You can adjust the volume level of the beepsound that is produced when the remote control isoperated and the volume level of the voice guide.

Press the MENU button to displaythe main menu. Select “Volume”from the main menu by tilting thejoystick and press ENTER.

When the settings have beencompleted, select “OK” by tilting thejoystick and press ENTER.

The volume adjustment screenappears. You can adjust the volumelevel in seven steps from 1 to 7.Select the desired level by tilting thejoystick and press ENTER.

Notes:•When you want to turn off the sound of the

navigation system, select “Off” and pressENTER.

•You can temporarily turn up the volume forvoice guidance while driving on a motorwayby activating (ticking) “Automatic volumelevel control”. Tilt the joystick to select“Automatic volume level control” and pressENTER.

1

2

3

Drive simulationTo check the searched route, you can carry out adrive simulation. The icon for the current vehicleposition moves along the searched routeindicating the contents of guidance that will beprovided.

When the calculation of the routehas been completed, the displayshows the entire route on the mapand the point setting menu. Fordetails, see the searching for a routeon page 16.

Select “Guide” from the pointsetting menu by tilting the joystick,then press and hold ENTER for atleast 5 seconds.

The drive simulation starts.To stop the drive simulation, pressthe RETURN button. The displayreturns to the current vehicleposition screen.

1

2

3

50

Others

4

2

3

Viewing GPS screensGPS satellite information being received isdisplayed on the screen. If the error for thevehicle’s current position is too large, check howmany GPS satellites you are receiving.Furthermore, you can confirm the status of theSpeed Pulse, ACC Power, Parking brake,illumination (status of the vehicle lights) etc.


The “Setup” screen appears.Select “GPS info.” under “Info.” bytilting the joystick and press ENTER.

Tip:The number of satellites that are highlightedindicates the number of GPS satellites beingreceived.


Lights in blue when satellite signalsfor 3D GPS are being calculated.

The GPS information screen isdisplayed.Confirm the setting of each item.

1

Automatic dial operation

3

2

1

Notes:•You cannot call if a telephone number is not

registered to the point of interest (POI).•The “ ” menu is not displayed if the

Nokia 6090 (GSM 900 Car phone) is notconnected.

Blinks when the SpeedPulse signal is being input.

4

If your navigation system is connected to theNokia 6090 (GSM 900 Car Phone), youcan automatically dial to the “Point of Interest”(POI) and “Memory Points” that you have alreadyplaced in memory.

Note:To connect the navigation system, you need a Navi-Nokia 6090 cable (KCE-6090P).Please be aware that the telephone numbers ofitems registered on the disc may change day by day,and they are not always correct.

Automatic Dialling from aPoint of Interest item

Press the MENU button to displaythe main menu. Select “Destination”from the main menu by tilting thejoystick and press ENTER. Select“POI” from the sub-menu by tiltingthe joystick and press ENTER.

Refer to “Searching for a point ofinterest (POI)” (page 24) and searchfor a desired POI item. Then displaythe screen map.

Select “Info” by tilting the joystickand press ENTER.

The information screen appears.Select “ (Call)” by tilting thejoystick and press ENTER.

51

EN

4

56

3

2

1

56

The number is automatically dialled,and the telephone is connected.

To disconnect the telephone, pressthe button.

Touch:In the case of touch operation, the “ ”button is displayed in the touch button areaonly during a call. Touch this button to finishthe call.

Note:If the telephone is not connected due to busyline or some other cause, a message will bedisplayed.To delete the message, press the RETURNbutton.

The number is automatically dialled,and the telephone is connected.

To disconnect the telephone, press button.

Note:If the telephone is not connected due to busyline or some other cause, a message will bedisplayed.To delete the message, press the RETURNbutton.

Touch:In the case of touch operation, the “ ”button is displayed in the touch button areaonly during a call. Touch this button to finishthe call.

Automatic Dialling from aMemory Point

Press the MENU button to displaythe main menu. Select “Destination”from the main menu by tilting thejoystick and press ENTER. Select“Memory point” from the sub-menuby tilting the joystick and pressENTER.

Refer to “Searching from memorypoints” (page 28) and search for adesired Memory Point. Then displaythe screen map.

Select “Info” by tilting the joystickand press ENTER.

The information screen appears.Select “ (Call)” by tilting thejoystick and press ENTER.

Notes:•You cannot call when the telephone number

is not registered to Memory Points.•The “ ” menu is not displayed if the

Nokia 6090 (GSM 900 Car phone) is notconnected.

52

Reference

Buttons and functions of remote controls

Reference

Tips:After pressing the MODE button, press the following buttons while the status indicator is blinking : numerals(0 to 9), BS. and OK.

Remote Control transmitterTransmits the remote control signals.Aim toward the display monitor foroperation. Status indicator

Illuminates when the remote istransmitting.

MODE buttonPress this button to input numeralsusing the numeric keypad. Thenumerals can be input while thestatus indicator is blinking.

MENU buttonDisplays the main menu.

buttonDisplays the screen configurationselection menu.

Numeric KeypadUse these buttons after pressingthe MODE button to enter phonenumbers, address numbers orstreet names containing numbers(i.e., 42nd St.).BS key : Deletes the character

previously input.OK key : Executes numeral

inputting

M.PT. (Memory Point) buttonDisplays the memory point list.You can set the desired memorypoint as a destination.

Joystick/ENTER buttonSelects highlighted items in menus andmoves map displays and vehicle positionicon. Tilt and hold this to scroll at a higherspeed. Press the ENTER button to selectany highlighted function, screen icon orstreet segment.

Zoom/Scroll buttonsChange map magnification ratio upward ordownward in 14 steps. When the button ispressed momentarily, the mapmagnification ratio changes one step.When the button is pressed and held, themap magnification ratio changescontinuously. The page scrolls if the list ismore than 2 pages.

AUDIO/NAV. switchSwitches between Audio andNavigation operations.Pressing this button illuminates thehighlighted portion of the display.

ON/OFF buttonTurns the pictorial display on or off.

DEL. DEST. buttonDeletes current destination.(Deletes only the next destination to go to.)

RUE-4141

LO.PT. (Local Point) buttonPress to display the information of theset POI.The “Show POI icons” screen isdisplayed.

RETURN buttonReturns the navigation system tothe previous searching.

ROUTE buttonPress to change the set route. “Changeroute” screen is displayed.

DEST. (Destination) buttonDisplays the destination menu.

TEL. buttonDisplays the telephone number inputting screen.

POS. (Position) buttonReturns to the current position ofyour vehicle.When this button is pressed whilethe current vehicle position map isdisplayed, information about placesaround the current vehicle positionis displayed.

VOICE buttonInitiates vocal instruction for nextroute maneuver or repeats lastinstruction.

Note: Due to continuous product improvement, specifications are subject to change.

RIGHT MAP buttonDisplays the Edit right screenmenu when the dual-screen isdisplayed.

buttonDisplays the “TMC event list” screen.

buttonFinishes a call.

53

EN

Remote control button and touch buttonThe table below shows the various functions and their respective remote control (RUE-4141) and touchbuttons.

Remote Control RUE-4141 Touch Button

No.

1

2

3

4

5

6

7

8

9

!

"

#

Feature

Changes the map magnification ratio upward or downward.Displays the “TMC event list” screen.Displays the screen configuration selection menu.Press or touch to display the information of the set POI.The “Show POI icons” screen displayed.Press or touch to change the set route. “Change route”screen is displayed.Returns the navigation system to the previous searching.Finishes a call. Displayed only during a call.Displays the main menu screen.Displays the destination menu.Returns to the current position of your vehicle.When this button is pressed or touched while the currentvehicle position map is displayed, information about placesaround the current vehicle position is displayed.Initiates vocal instruction for next route maneuver or repeatslast instruction.Displays the buttons for the touch operation compatiblemonitor.Displays the Edit right screen menu when the dual-screen isdisplayed.

Remote Control RUE-4141

3 4

LO.P.T.

ROUTE

RETURN

MENUDEST.

POS./VOICE

—

RIGHT MAP

Touch Button

POI

Route

Right side map

1

6

2

5

9

7

8

3

4

#

!

1

2#

5

6 3 7 9 ! "8

4

Reference

54

In case of difficultyIf you encounter a problem, please review the items in the following checklist. This guide will help youisolate the problem if the system is at fault. Otherwise, make sure the system is properly connected orconsult your authorized Alpine dealer.

Cause

Blown fuse

Ambient temperature over 50°C

Moisture condensation

The vehicle position changed afterthe ignition was switched off.• Movement on a ferry boat• Rotation of a parking lot turntable• Movement by tow truck

Poor satellite configuration

Measurement is 2dimensional

The navigation screen is off.

The disc is dirty.

The pickup lens is dirty.

The remote control batteries arewearing out.

While driving on the route, somemenu operations cannot be carriedout.

Auto reroute mode is not set.

Solution

Replace with a fuse of the prescribed rating.

Lower the temperature in the vehicle below 50°C, forexample by running for a while with the window openor by using the air conditioner.

Allow enough time for the condensation to evaporate(about 1 hour).

Drive for a while with GPS signal reception.

Move to a location where GPS satellite reception iseasy.

Press the ON (ON/OFF) button on the remote control.

Clean the disc.

Consult your Alpine dealer. (Do not use a lens cleanerdisc sold in the market.)

Replace the remote control batteries.

Move the vehicle to a safe location, stop, and engagethe parking brake, then carry out this operation.

Select “Setup” from the main menu, then select ONfor Auto reroute. (See page 46.)

Symptom

No operation

The present vehicleposition cannot bemeasured correctly.

The measurementerror is too large.

Screen not displayed

Cannot read disc isdisplayed for a certainoperation.

Unstable operation

Cannot operate menu

No auto reroute

55

EN

Cause

• The disc has been removed.• There was no disc in the system when

the power was switched on.

• A disc that the system cannot read hasbeen loaded.

• The disc is dirty or upside down.

• The disc cannot be read because ofcondensation.

• An attempt was made to search themap from home with no homeregistered.

• An attempt was made to search themap from a memory point with nomemory point registered.

• An attempt was made to register morethan 200 points in memory.

• An attempt was made to set more than5 destinations.

• When the destination or waypoint wasspecified, there was no road in thearea, so no route could be found.

• Route could not be found for somereason.

If this message appears

Solution

Insert the disc.

Insert the map disc.

Take out the disc, check if it was upsidedown, clean it if necessary, thenre-insert it.Take out the disc, allow enough time forcondensation to evaporate (about 1hour), then re-insert the disc.

Register your home, then search themap.

Register a memory point, then searchthe map.

Erase unnecessary points, then register.

Focus on a nearby major road, thenspecify the destination or waypointagain.

Try to search for route again, or setanother location as destination.

Message

No DVD.Please insert map DVD.

Unable to read data.Check if map DVD is correct.

Home is not registered.Register in menu Memorypoints.

No memory point registered.Register in menu Memorypoints.

Unable to set additional points.Perform operation again afterdeleting unnecessary points.

No roads possible for guidancenear destination. Please refer tomap.

Route could not be found.

Various messages are displayed on the monitor screen during operation. In addition to the messagestelling you the current status or providing guidance for the next operation, there are also the followingerror messages. If one of these error messages is displayed, carefully follow the instructions in thesolution column.

Yamagata PrintingCo., Ltd.2-6-34, Takashima,Nishi-ku, Yokohama,Kanagawa, Japan

ALPINE ELECTRONICS MARKETING, INC. 1-1-8 Nishi Gotanda,

Shinagawa-ku, Tokyo 141-0031, JapanPhone 03-5496-8231

ALPINE ELECTRONICS OF AMERICA, INC.19145 Gramercy Place, Torrance,

California 90501, U.S.A.Phone 1-800-ALPINE-1 (1-800-257-4631)

1-888-NAV-HELP (1-888-628-4357)

ALPINE ELECTRONICS OF CANADA, INC. 7300 Warden Ave., Suite 203, Markham,

Ontario L3R 9Z6, CanadaPhone 1-800-ALPINE-1 (1-800-257-4631)

1-888-NAV-HELP (1-888-628-4357)

ALPINE ELECTRONICS OF AUSTRALIA PTY. LTD.6-8 Fiveways Boulevarde Keysborough,

Victoria 3173, AustraliaPhone 03-9769-0000

ALPINE ELECTRONICS GmbHFrankfurter Ring 117,

80807 München, GermanyPhone 089-32 42 640

ALPINE ELECTRONICS OF U.K. LTD.Alpine House

Fletchamstead Highway,Coventry CV4 9TW, U.K.Phone 0870-33 33 763

ALPINE ELECTRONICS FRANCE S.A.R.L.(RCS PONTOISE B 338 101 280)

98, Rue de la Belle Etoile, Z.I. Paris Nord Il,B.P. 50016, 95945 Roissy Charles de Gaulle

Cedex, FrancePhone 01-48638989

ALPINE ITALIA S.p.A.Viale C. Colombo 8, 20090 Trezzano

Sul Naviglio (MI), ItalyPhone 02-484781

ALPINE ELECTRONICS DE ESPAÑA, S.A.Portal de Gamarra 36, Pabellón, 32

01013 Vitoria (Alava)-APDO 133, SpainPhone 945-283588

R

Designed by ALPINE JapanPrinted in Japan (Y)

68-00323Z49-A

r en smart map pro - alpine europe · on the map display: observe actual traffic restrictions and...

Documents