SU

PER

MA

RK

ET

EQ

UIP

MEN

T

PACKAGING SYSTEMS

MAGIC WANDSPORTABLE SHRINK

PACKAGING SYSTEM

YOUR BEST CHOICE FOR ALL YOUR WRAPPING NEEDS

R

Features of the Magic Wand

Standard 115 Volt Power Supply

Fully Portable

Sealing Wand With Power Pack

Neoprene And Silicone Sealing Pads

Film Dispenser With Separator Bar

Hole Punch

Service Kit

Power Requirement:

Wattage:

Working Height:

Weight:

Constant Heat: (3.17 kg)

Impulse Heat: (6.35 kg)

Manual Impulse Heat:

Warranty:

115 Volt, 10 Amps, 60 Cycles

Single Phase Circuit With Ground

1,150 Watts

Table Top

(Wand and Power Pack Only)

7 lbs.

14 lbs.

9 lbs.

Ninety Days On Parts

(4.08 kg)

Model MWS-C-24” Long Seal Bar Table Top System

Specifications and Options

Crafted with pride in the

PMMI

R

MEMBER

Model MWSBT-C-24 With Optional AdjustableLegs, Casters and Label Dispenser

Options:

220 Volt Power Supply

HG-966 Hot Air Gun

HG-115V Hot Air Gun

HG-302A 220 Volt Heavy

Duty Master Hot Air Gun

24” Sealing Block

MW Alum. Tables In 2 Sizes

28” D, 44” W, 29” H

43” D , 29” H

Adj. Height Legs For Table

29” To 38” Overall Height

, 44” W

UL®C

Listed

Available Magic Wand SystemsM

AG

ICW

AN

DP

OR

TA

BLE

WR

AP

PER

R

For Additional Product Information, Contact:

HEAT SEALING EQUIPMENT LLC4580 EAST 71ST STREET CLEVELAND, OHIO 44125

(216)341 2022 (800)342 6329 FAX (216)341 2163

WEBSITE www.heatsealco.com E-MAIL custserv@heatsealco.com

Model MWS-M: Manual Impulse Heat

The same system as the except the

operator controls the length of the heating cycle

by depressing and holding the button switch. The

unit is not automatically cycled off but begins the

cool down cycle as soon as the button is released.

Available sizes:

MWS-I

18”, 24”

Model MWS-I: Timed Impulse Heat

The sealing wire is activated by a push button

switch which heats the wire to cut and seal the

film being used. The heating cycle is determined

by adjusting the seal timer on the power pack.

Following one complete cycle, the sealing wire will

cool until triggered again.

This unit provides for greater sealing consistency

as the timer controls the exact heat to the sealing

wire during every heating cycle.

Available sizes: 18”, 24”, 36”

Model MWS-C: Constant Heat

The sealing wire remains heated as long as the

unit remains on. The wire is protected by an

aluminum guard to protect the operator. The user

must press down on the spring loaded sealing

arm in order to cut and seal the film being used.

Available sizes: 18”, 24”, 36”