1

NO: RVPN I XEN i'T&C / CHRI Works IF. - 0312017-18 I D. 19 Date 13 -04 - 2017

RAJASTHAN RAJYA VIDYUT PRASARAN NIGAM LIMITED[AN ISO 9001:2008 CERTIFIED COMPANY]

[Corporate Identity Number (CIN):U40I09RJ2000SGCOl6485](Registered Office: Vidyut Bhawan, Jyoti Nagar, Jaipur-302005)OFFICE OF THE EXECUTIVE ENGINEER. (T&C)

CHANDERIYA, CIDTTORGARH (RAJASTHAN) PIN: 312021Mobile 9413382270: Email

Notice Inviting Bid No. 03 F. Year 2017-18Sealed tenders are here by invited from reputed Firms / Contractors for execution of the Erection of steel stracture,Laying of earth mesh, Equipment erection and stringing of Bus-Bar and jumpers, Installation of control panels, Cablelaying and termination of cable for 132KVBhopalsagar Bay work at 132KVGSS, RRVPNl Kapasan.

Specification number RRVPNIXENIT&C/CORIWORKSINIT NO.oi/201 '7ol8Name of the work Erection of steel stracture, Laying of earth mesh, EquipmentiP erection and stringing of Bus-Bar and jumpers, Installation of

control panels, Cable laying and termination of cable for132KVBhopalsagar Bay work at 132KVGSS, RRVPNl Kapasan.

Estimated Cost Rs. 157667.00Tender cost NILPeriod of completion 03 MonthEarnest Money NIL J

Validity period of offer 70 daysLast date for sale of tender specification Up toO1.00 PM on 28.04.2017Last date of submission of tender Up to 02.00 PM on 28.04.2017Date of opening of tenders Up to 03.00 PM on 28.04.2017Enclosed: G-schedule.

Note :- For this NIB copy of the Bid specification (not transferable) can be obtained from this office in above mentioneddate and time. ~

Executive Engineer (T&C)RVPN Chittorgarh

Copy to :(1) The Superintending Engineer (T&C) RVPN Chittorgarh.(2) Assistant Engineer (T&C) RRVPNL Banswara./ ch I ~(3) Feeder Manager (T&C) RVPN, Udaipur for Uploading on RVPN WEB PORTAL.(4) The Accounts Officer (T&C) RVPN, Chittorgarh.(5) MIS Geetangali Electricals, A 96 Jin Mata Mandir road, Near Badi Puliya,Bhilwara.(6) MIS Chamunda Engineering Enterprises VP- Gomana, Choti Sadari, Pratapgarh.(7) MIS New Tech Engineers, Badi Sadari, Chittorgarh.(8) Notice Board

~Executive Engineer (T&C)RVPN Chittorgarh

Signature of Bidder

8'~ '. ~E~l'I~~l~lYl~N~~,~~_~,!~a,meof Scneme:-132K\rBhopalsa,garBay' atJ32KV' G~ Kapasan:' r ' "; .' .IWoi~.'(~I1~ar~e:-~,l ~~~L~l!ttorg~i'!l. '. A

,3 3.BUS-BAR WORK.,

A.Stringing of 220KV, 132KV, 33KV & llKV Bus Bar of ACSRoonductor.including transpotation of conductor .disc insulator ,cleanoing andassembly of disc insulators as required along with fitting of bolted type or

3Acompression type tension hardware as made available (compression machine shall beprovided bY'RVPN on rent free basis),making up at one, end stringing of conductorsbetween the beams with specified sag and tension ,also equalizing sag and fitting'Ispacers and spacer T-clamps for twin conductor for three phases of conductors in eachbuis section ..

PRJ1307 (i) Single ACSR Panther Section 875 1 875/B. JUMPERS OF ACSR CONDUCROR (3Nos., Y-type) between bus to

Iequipment or between equipment to equipment bus to bus, including transportation of

38conductor, dise insulatores and hardwere from site stores to location, cleaning and

'~ assembly of dise insulators as required, cutting required length of conductors, makingconnections, fixing of spacer, T- clamps as required tightening of clamps/ connectors,dressing etc. for three phase .'

PRJ1312 (ii) Single ACSR Zebra/ Panther conductor Set 250 30 750V4.SRTINGING OF EARTH WIRE (Size 7/3.15mm or 7/4.00!IJ.lll)includingtranspcration of earth wire, tension hardwere etc. from site to locations.laying andcutting required length of earth wire fitting of bolted type or compression type

4 RJl316 hardware as made avaible ( compression. machine shall be provided byRVPN on rent Each 219 3 657 V--free basis) making up to at one end stringing of earth wire between structure peaks ~with specified sag and tension jurnpering and connecting earth bonds for single earthwire. ,i

5 5.ERECTION OF SUB-STATION .ElQUIPMENTS ;A.Errection of current 'Transformer/Potential Transformer/ Capacitive voltage I

5ATransformer with Clamps & connectors on already erected steel structure including Itransportation from site store to locations, fabrication of base frame,fixing of terminalconnectors,tightening of nuts & bolts etc. complete in all respect. I

PRlJ1320 [ii) 132KV CT/PT / CVT Nos. 1063 12 12756.,......-,.--III

B.Erecti

14

;a-

6.Errection of Control '~ Relay Panels complete in all respects including, transportation form site store to control room ,placing on foundation /cable

6 trenclr.as'perIayout "interconnection between control& relay panels .fixing ofside /top covers and doors, earthing to existing earth strip in control roomconnection ofbus wiring to existing panel and between control and relay panelas required.

~PRJ1351 (i) 2 )(2 Duplex Panel Nos. 1894 2 3788 .....7.Erection of Marshalling KiosklLille Matching Unit (LMU) ILine Matching

\7 &Distribution unit ( LMDU) compJete in all respects including transporation

• to siteto location, Placing on foundation/cable trench as per layout, preparingfor grouting etc.~PRJl3'55 , (i) 220KV or 132KV MarshallingKiosk Nos. ,281 2 5'62_L

8 LAYING AND TERMlNATION OF CABLESControl Cable r.'

(i) Laying of PVC insulated tinarmoured armoured control cables of 1.1KV ' , -grade with copper conductor in cable trench as per specification as requiredinoluding transporation of cable drum from site to store to location laying incable trenches, cutting to required length, placing them on cable racks/cabletrays cable batten& dressing including removing and re-fixing trench covers asrequired, making.nenecessary connections, testing cable making on both thetremination ends, e~c.asper required for all size from 2cX2.5sq.mm. to 20c x2.5 sq.mm 4cx4sq.mm. and 4cx6sq,rnm.

~PRJ1381 a) Unarmoured control cables. Mtrs] 4 5500 22000

, (ii) Fixing of control cable in position withsingle compression nickel plated ';j'

brass cable glands confirming to IS:12943& having three metal washers andone rubber ring, including preparation of cable and drilling of correspondingholes in gland plates etc.as required & including cost of cable glands for eachgland fo size. -:----P_RJ1383 ~)'19 sq.mm. unamoured control cables ' Nos. 33 100 33Q!t

PRJ1385 c) 25 sq.rnm. unamoured control cables Nos. 50 60 3000/ :----PRJ1387 e) 32 sq.mm. unarnoured control cables Nos. 72 20 1440_ I.-----

(iii)Termination of\~ire of cables with copper counductor using copperterminal'ends9Pin or ring type as required of Dowell's or equivalent make asapproved by Engineer - in-Charge dully crimpedwith crimping tool .includingmaking wire end ready for all wires for each cable at both ends for cable of thefollowing sizes.

PRJl389 a)2CX2.5sq.mm ~~~ 16 30 480~PRJ1391 b) 4CX2.5sq,mm l.:.