ray tracing software and emulation
TRANSCRIPT
SOFTWARE SIMULATION
EGLA COMMUNICATIONS in collaboration sith S.O.L LLC provides an integrated software solution for MobileCAD and a state of the art “RayTracing” software and technology. This software permits a whole city map to be loaded, antenna placement, coherence BW estimates, RMS-delay calculation, CIR and CFR models, and instantaneous RX power simulation.
Our software can be licensed in a per cloud-instance or in its entirety with source code. The simulation software integrates with MobileCAD recreating an entire emulation environment.
`The software simulation tools runs in a Windows environment and is fully customizable.
MobileCAD is covered under US Patent: 7,231,330 and licensed by Mobility Workx, LLC
Simulation using Deterministic Models
The deterministic model is based on Geo-metrical Optics, providing advantages over
statistical and empirical models:
Maps directly with Field TestingGeneration of CIR (Channel Input
Response) and CFR (Channel Frequency Response) with great ease
Full MIMO simulation, and many more
Ray Tracing Simulation
mobilityWORK
Simulation
Emulation Environment
MOBILECAD interfaces with the RF Tracing simulation too to and plays back the simulation in to the real world. MobileCAD applies RSSI values and fading effects as simulated in the tool to a mobile terminal in 2G, 3G, 4G, even WiFi networks.
The simulation is validated on real hardware in any of the environments used for testing.
Improve testing cycles and improve performance of your mobile device
Mobile Terminal Testing (iOT, 4G, and 5G)
Usage Scenarios
Ray tracing simulations are created on top of a realiostic map with buildings or mountains. Building information comes from Google Earth and additional information on density of materials for each buliding is fed into the model.
RF conditions can be changed and mapped accordingly, creating receivers at any location. Mobile performance can be tested at a static position or moving incluidng software applications, ,video streaming, gaming, or even battery life.
MobileCAD Interaction
Once a simulation model is createdin our cloud, the data can be fed into MobileCAD Emulator . MobileCAD will apply the required path loss calculated in the simulation and apply the RF fading to any receiver or device being tested.
Mobile performance can be played back to a real world scenario at no time and using different mobile terminal configurations.
MobileCAD automation can be played while RF parameters are changed according tothe model.
Improve testing cycles and improve performance of your mobile device
RF Ray Tracing Model MobileCAD Emulator Mobile Terminal2G/3G/4G/WiFi
Licensing Information
Software license, customization, and patents are available for Licensing to:
Mobile Manufacturers
Carriers and Teleco Operators
Research and Development
Military
751 Park of Commerce Dr. Suite 128
Boca Raton, FL, 33487(561) 306-4996
http://eglacomm.net/ip/[email protected]
•
•
•
•