5-235 Series-Crank Operation...

Installation Instructions RB 500 Manual Roller ShadesHeavy Duty Crank With Fascia

Removal

2

1

1

2

1

Insert the Plate L into the bracket on the non-operating side. Turn the Plate L in the rolling off direction (1)and secure it with the locking clip (2). Not necessary when using bracket with leveler.

Install the brackets (L or R marked inside) with thescrews provided.a) recess b) ceiling c) wall

Insert the crank with the front plate into the bracket (1). Turn the crank in the rolling off direction and secure it with the locking clip (2).

Press the bearing and lift the blind until it snaps into the bracket.

Place the tube adapter on the crank head.

Fix the blind by turning the locking ring against the bearing.

Place the front profile in the bracket. Make sure that the profile slides under the nose of the bracket.

Push the profile to snap it into the bracket.

To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand.

Installation Option: Leveller

2

1

click

2

1

click

a

c

b

2

1 2

Insert the front plate into the bracket on the non-operating side. Turn the front plate in the rolling off direction (1) and fix it with the bracket clip (2). Not necessary when using bracket with leveller.

Fix the bracket (L or R marked inside) with the screws provided.a recess b ceiling c wall

Insert the crank with the front plate into the bracket (1). Turn the crank in the rolling off direction and fix it with the bracket clip (2).

Press the tube bearing plug and lift the shade until itsnaps into the bracket.

Place the tube adapter on the crank head.

Secure the shade by turning the locking ring on thetube bearing plug furthest away from the bracket.

Place the front profile in the bracket. Make sure that the profile slides under the nose of the bracket.

Push the profile to snap it into the bracket.

To adjust skewing, put the provided Allen key into the screw of the leveller and turn it left or right to move the blind up and down. Support lifting of large heavy blinds with the palm of your hand.

Installation Option: Leveller

2

1

click

2

1

click

a

c

b

3

Insert the front plate into the bracket on the non-operating side. Turn the front plate in the rolling off direction (1) and fix it with the bracket clip (2). Not necessary when using bracket with leveller.

Fix the bracket (L or R marked inside) with the screws provided.a recess b ceiling c wall

Insert the crank with the front plate into the bracket (1). Turn the crank in the rolling off direction and fix it with the bracket clip (2).

Press the bearing and lift the blind until it snaps into the bracket.

Place the tube adapter on the crank head.

Fix the blind by turning the locking ring against the bearing.

Place the fascia in the bracket. Make sure that the fascia slides under the nose of the bracket.

Push the fascia to snap it into the bracket.

To adjust skewing, put the provided Allen key into the screw of the leveler and turn it left or right to move the shade up and down. Support lifting of large heavy shades with the palm of your hand.

Installation Option: Leveler

2

1

click

2

1

click

a

c

b

4

Place the screw driver under the bracket cover, turn the screw driver and slide the bracket cover from the bracket.

Slide the bracket covers onto the brackets.

Press the bottom of the fascia upwards (1) and pull it outwards (2).

Move the blind downwards out of the bracket.

Unfasten the locking ring. Slide a screw driver between locking ring and bracket and push the bearing in the crank direction.

Place the screw driver into the slot of the bracket clip. Press the bracket clip down and turn the crank in the roll-up direction. Take the crank out of the bracket.

Type 5-2355-2455-3055-325

Installation Instruction Roller Blind (Fascia)Crank Operation

Removal

2

1

1

2

5

Place the screw driver under the end cap, turn the screw driver and slide the end cap from the bracket.

Slide the end caps onto the brackets.

Press the bottom of the front profile upwards (1) and pull it outwards (2).

Move the shade downwards out of the bracket.

Unfasten the locking ring. Slide a screw driver between locking ring and bracket and push the tube bearing plug in the crank direction.

Place the screw driver into the slot of the locking clip. Press the locking clip down and turn the crank in the roll-up direction. Take the crank out of the bracket.

Type 5-2355-2455-3055-325

Installation Instruction Roller Blind (Fascia)Crank Operation

Removal

2

1

1

2

6