rbuildcert tmv2 approved 245 all dimensions in mm unless ... · all dimensions in mm unless stated...
TRANSCRIPT
57
180
178
All dimensions in mm unless stated245
57
178
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Advanced Water Company, Unit D5 The Enterprise Centre, Off Enterprise Way, Vale Park, Evesham Worcestershire, WR11 1GS TEL: 01386 760066 FAX: 01386 760077 EMAIL: [email protected]
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Typewritten Text
Darren
Air vent
Robin
Logo
Robin
Typewritten Text
Heatguard BF2-2
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
• Excellent temperature stability, using a quick reaction thermostat, reducing the risk of uncontrolled hot water temperature and giving a positive shut down if the hot or cold supply fails. • High quality and technically advanced internal components provide excellent scale resistance and improved lifespan. • High flow rates at very low inlet pressure make the Heatguard BF2-2 ideal for gravity fed systems. • Minimal moving parts and simple construction reduce maintenance service intervals. • Comes complete with check valves and strainers, or optional 4in1 isolators, incorporating a ball valve and test point.
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
A high quality, high flow thermostatic mixing valve designed specifically for bath fill applications.
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Description: The Heatguard BF2-2 is a high flow TMV2 approved thermostatic mixing valve for use in domestic applications such as housing associations, private dwellings, flats, hotels, student accommodation etc. The valve mixes hot water with cold water to regulate the outlet temperature to ensure the supply of constant temperature mixed water throughout the system. The Heatguard BF2-2 has a very high flow, suitable for use where larger flow rates are required: e.g. a small commercial hot water system.
Robin
Typewritten Text
They are ideally suited for Whole Bathroom distribution, to control distribution temperatures for an entire bathroom, thus protecting the end users from the risk of scalding. For Bath fill, they can be used to protect vulnerable people from scalding in a full body immersion installation such as a bath.
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Specifications: Factory temperature setting: 41ºC Outlet temperature setting range: 35-50ºC Temperatures, Hot supply: 52-90ºC max Temperatures, Cold supply: 5-25ºC Minimum hot to mix differential temperature: 10ºC Temperature stability (nominal): ± 2ºC Working pressure, static: 16 bar Working pressure, dynamic: 0.1- 6 bar max Maximum pressure loss ratio: 10:1 Flow rate, minimum: 4 lpm Flow @ 3 bar: 75 lpm
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Standards: BSEN 1287
Robin
Typewritten Text
Approvals: WRAS Approved BuildCert TMV2 Approved
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
Typewritten Text
Robin
05