reachstacker - sany group
TRANSCRIPT
REACHSTACKER
SRSC4531G 45t Lifting Capacity Volvo Engine Dana Clark Gearbox Elme Spreader Kessler Drive Axle SANY Steering Axle 360 degree LED Lighting System Bucher and Parker Hydraulic System IFM Electronic Controller CE Compliant Made in Germany
Transmission Dana Clark 15.5 HR 36000
Hydrodynamic Transmission
Four speeds forward and four reverse
Smooth electronic gear change software controlled
Modulated transmission can operate in automatic or
manual shifting mode.
Electro-Hydraulic Control System
Forward/Backward Electrically Controlled Anti-
Reversion Device
Pipeless Hydraulic Pilot System
Engine Volvo TAD 952 VE Euro IIIa
Power 240Kw / 326HP at 1900 rpm
Fully Electric EFI Control System allows for
improved engine performance, better fuel
efficiency, and improved emissions control.
Cylinders : 6
Displacement : 9.36
Volvo TAD 1170 VE Euro IV Power 235Kw at 950 rpm
Fully Electric EFI Control System allows for
improved engine performance, better fuel
efficiency, and improved emissions control.
Cylinders : 6
Displacement : 10.84
Spreader Elme 817
20ft and 40ft container handling (30ft stop as
option)
Sideshift ±800 mm
Rotation -105/+195 deg
+/- 30 degrees rotation stop
Dampening cylinder system
Four lifting lugs close to twistlocks
LED twistlock indicator
CANBUS controller and CAN diagnostic
Proportional rotation
Piggyback Spreader (optional) Elme 857
20ft, 30ft, 40ft and B7 container handling
Powered side tilt of +/- 6°.
Two sensors for +/- 30° stop on rotation
Sideshift ±800 mm
Rotation -105/+195 degrees
+/- 30 degrees rotation stop
Four liftin
capacity with +/- 10% load eccentricity
Dampening cylinder system
Patented leg folding system that provides
block-stacking feature.
Four grapple arms that are folded in and out in an
automatic sequence.
A load clamping system that involves all four grapple arms.
Piggyback feet designed according to fit European trailers.
Separate clamping indication for left and right side.
LED twistlock indicator
CANBUS controller and CAN diagnostic
Proportional rotation
Drive Axle Kessler D102 PL341
Width 3807mm with standard
mudguard and vehical width
Heavy Load Drive Axle durable for
impact under all tough working
conditions
Service Brake with Wet Disc
Brakes
Tire Size – 18.00 – 25”
Steering Axle SANY
Heavy duty design
Double acting steering cylinder
Oleo-Pneumatic Suspension
System
Greasable bearings
Centralized greasing (option)
Lighting LED
P2x4 LED lights at each front mudguard
2x2 LED side working lights and reverse lights
4x LED working lights at boom
2x LED working lights close to spreader
LED reverse lights
LED stop lights
Rotating amber beacon
360˚ degree lighting
Electrical Control System FULL CAN BUS system with 4 separate CAN BUS
interfaces for secure data transfer
Redundant CAN BUS Joystick for failproof movements
control
CAN BUS diagnostic for main components
Filter status indicators
Latest IFM screen with High Resolution Display
Integrated rear view camera (standard)
Secondary Display positioned on top of front window
for higher driver comfort when stacking containers
Hyrdaulic System Load sensing hydraulics. System provides the right
amount of power for each movement required by
operator.
2 double variable displacement pumps
1 load sensing proportional distributor
3 main filters for brakes and drive axle
Electronic redundant CAN BUS joystick with auto
throttle function.
Cabin Spacious, comfortable cabin with excellent all-around
visibility
Hydraulic controlled sliding (standard)
Fully adjustable Grammer Seat SYZY-GC-A
Additional buddy seat with seat belts
2.0 liter fire extinguisher
Digital climate control system
Secondary Head up IFM display at top windscreen for
load and spreader information
Main IFM colour display integrated in main dashboard
Radio pre-arrangement
Sun curtain on roof window
Main Options Extendable counterweight for additional capacity
Integrated Piggy Back Spreader Elme mod. 857
Automatic Fire suppression system
30´stop on spreader
Integrated Surround system
Rear parking sensors
Air suspended Grammer seat with lumbar
support and heating system
Additional cabin heater
Winter package for cold climate
Structure
CHASSIS Box type chassis designed for heavy duty application.
Steel classification DIN EN 10025 = S355JR
BOOM 2 Stages box-type telescopic boom
High resistance profiles and steel plates reinforcements.
Steel classification DIN EN 10025 = SQ890QL and SQ 890QL
Safety Features Protection against change of direction with machine in motion
Safety valves with speed limiter on cylinders
Anti over-tipping protection system limits the travel speed preventing
tipping due to excessive speed.
Engine and transmission protection system.
Redundant CAN BUS
SPREADER
Twist locks locking only after correct positioning
Lifting only after correct locking
Twist locks unlocking only after correct positioning
Anti-collision rotation limit switch
Moom lowering stop device when spreader is seated
Performance Parameters
Overall Weight Kg 74890
Weight on Drive Axle Unladen Kg 34898
Weight on Drive Axle Laden Kg 87809
Weight on Steer Axle Unladen Kg 39079
Weight on Steer Axle Laden Kg 31462
Max. Lifting Speed Unladen mm/s 420
Max. Lifting Speed Laden mm/s 250
Max. Lowering Speed Unladen mm/s 360
Max. Lowering Speed Laden mm/s 300
Max. Travel Speed Unladen km/h 25
Max. Travel Speed Laden km/h 21
Gradeability Unladen % 38
Gradeability Laden % 31
Max. Lifting Height mm 15100
Boom Angle ° 0-60
Hydraulic Pressure bar 240
Noise Level dB 72
Main Dimensions
Overall Length mm 11200
Wheel Base mm 6000
Min. Ground Clearance mm 350
Overall Height mm 4770
Max. Boom Height mm 17785
Counterweight Motion (opt.) mm 500
Overall Width mm 6042-12175
Front Wheel Width mm 4190
Rear Wheel Width mm 3310
Front Turning Radius mm 1200
Rear Turning Radius mm 8285
Performance Parameters with Piggyback Spreader
Overall Weight Kg 83800
Weight on Drive Axle Unladen Kg 42100
Weight on Drive Axle Laden (45t) Kg 107000
Weight on Steer Axle Unladen Kg 41700
Weight on Steer Axle Laden (45t) Kg 21800
Max Lifting Height mm 14780
Min. Ground Clearance mm 300