Reco-lift 2.0The Reco-lift 2.0 is a temporary lift with a traction drive, so the speed is increased from 0.4 to 0.8 meters per second. Especially in the high-rise, there is an increasing demand for higher speed. In addition, the traction drive is more quiet, improving comfort considerably. The Reco-lift 2.0 is approved according to the Machinery Directive 98/37/EC, which meets the EN 81-1 EN 12159. Before usage the temporary lift is approved by an independent body (eg Lift Institute) and should be reappraised once every six months.

The Reco-lift 2.0 is accessible for stretchers, wheelchair users and people with a walker. You can see this by looking at the wide barrier-free entrance to the temporary lift, but also looking at the cabin of the lift. The cabin is equal to the cabin of a fixed lift.

Anyone can use the temporary lift without extensive instructions and complicated systems with passes and / or control cards. This is a great advantage, since no additional effort is needed to use the temporary lift. This is also a direct advantage in public utilization.

The cabin of the Reco-lift 2.0 is built into a stackable modular shaft which ensures that the temporary lift is wind-and waterproof and safe to use, even above wind-force 6.

Reco Special Products B.V.Containerweg 2a | 2742 RA Waddinxveen | The Netherlands+31 (0)182 74 40 50 | info@reco-lift.eu | www.reco-lift.eu

SPECIAL

PRODUCTS

Features and SpecificationsFeatures Reco-Lift 2.0

Temporary lift with a silent traction drive.

Safe & reliable. Remote monitoring through the use of Winmos. Also the temporary lift is completely closed, making it safe to use in all weather conditions (even above wind-force 6).

User friendly & comfortable because of the barrier-free entrance. This makes the temporary lift accessible for wheelchairs and stretchers.

The car has a mirror and handrail, which is according to the Disability Discrimination Act.

The temporary lift is energy efficient through the use of Bohnke & Partner Blue Mode technology & LED lighting.

4500

2500

2100

1100

Technical Specifications

Maximum rise:

50 m

Nominal passenger rating:

13 persons

Rated load:

1000 kg

Car dimensions:

1,1 x 2,1 x 2,2 m

Open width:

0,9 m width

Finishing elevator car:

Stainless steel (vandalism proof)

Doors:

Automatic sliding doors

Telephone coverage:

Emergency intercom

Speed:

0.8 m/s

Elevator shaft:

2,45 m x 4,5 m

Power supply:

400 V – 25 Amp