red leaf ap - stone anchor catalog...
TRANSCRIPT
STONE ANCHORS CATALOG
Stone AnchorsRed Leaf
Stone AnchorsProduct Catalog - 2014
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 2
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HEAD OFFICE:108 – 8410 Ontario St.
Vancouver, BC, V5X 4S6Canada
call toll free 1.877.522.1688
Our products are crafted
with advanced processing
equipment to ensure accuracy
and quality. A Red Leaf Sales
Representative can provide
samples of the material and
discuss detailing options.
© 2014 Red Leaf Stone Anchors - All rights reserved
Natural StoNe MaterialS
A wide range of natural stone such as various limestones, marble, basalt, sandstone, and granite.
SealerS aNd CleaNerS
Quality finishes that treat and protect your stone products.
thiN StoNe VeNeer
The beauty, warmth and durability of natural stone. Able to be used in multiple applications.
FireplaCeS
Classical and contemporary fireplace surrounds and mantels in natural and cast stone.
diMeNSioNal StoNe
Dimensional cut and exquisite hand carved elements, from columns and capitals to friezes and fountains.
See other product offerings at: redleafstone.com
Red Leaf Stone Anchors
epoxieS aNd adheSiVeS
Wide range of compounds and adhesives for glueing, laminating, anchoring, patching and
Full StoNe VeNeer
Premium full bed depth building stone.
latiCrete - MViS
Masonry Veneer Installation System - High quality mortarts and adhesives for installing stone veneer.
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 3
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Table of ContentsStone Fixing Systems - Overview .................................... 4
1. COmmOn BEnt PLAtE AnCHORS .......... 5
HA L Anchor Fixing Systems - Introduction ................... 6
HA L Anchor Fixing Systems - Installation ...................... 7
HA01 L Anchor ................................................................... 8
HA02 & HA03 L Anchor .................................................... 9
HA04 & HA05 L Anchor .................................................... 10
HA Anchors - Special Application ................................. 11
HCA Corner Anchors ...................................................... 12
2. mEDIum LOAD AnCHORS .................... 13
HZ Z Anchor Fixing Systems - Introduction .................... 14
HZ Z Anchor Fixing Systems - Installation ....................... 15
HZ01 Z Anchor .................................................................... 16
HZ02 Z Anchor .................................................................... 17
HZ02-S Z Anchor ................................................................ 18
HZ05 Z Anchor W. Riveted Nut ....................................... 19
HZ07 Z Anchor For Soffits .................................................. 20
HZ08 Z Anchor ................................................................... 21
3. HIgH LOAD AnCHORS ......................... 22
AXO Body Anchor Fixing Systems - Introduction ......... 23
AXO Body Anchor Fixing Systems - Installation ............ 24
BA Body Anchor ................................................................ 25
AXO1 & AXO2 Body Anchor........................................... 26
AXO3 Body Anchor .......................................................... 27
AXO4 Body Anchor .......................................................... 28
AXO Body Anchor - Special Application ..................... 29
Fixing Systems For Heavy Stone Panels ......................... 30
Fixing Systems For Heavy Stone Panels ......................... 31
4. SPECIAL APPLICAtIOnS ........................ 32
HZ Z Anchor - Special Applications Details .................. 33
HRS1 Restraint Anchor ...................................................... 34
HRS3 Restraint Anchor ...................................................... 35
5. SuB-CHAnnEL SyStEmS ........................ 36
HMP Sub Channel Fixing Systems - Introduction ......... 37
HMP Sub Channel Systems - Installation ....................... 38
ATS Sub Channel Systems - Product Information ........ 39
HMP Channels ................................................................... 40
HCSP Channel Supports .................................................. 41
HCRS Channel Restraint .................................................. 42
HMP Sub Channel Systems - Examples ......................... 43
HMP Channel Systems - Special Application .............. 44
HMP-ALU Aluminium Sub Channel Systems ................. 45
6. ACCESSORIES - PRODuCt DEtAILS ...... 46
Accessories - Pins, Plates, Shims & More ....................... 47
HB Expansion Bolts ............................................................ 48
7. APPEnDIx 1 - DESIgn PRInCIPLES ....... 50
8. APPEnDIx 2 - tESt CERtIFICAtES ......... 54
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 4
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
Stone Fixing Systems - Overview
Stone Fixing Systems - Overview
Fixing systems need to accommodate all types of backing walls whether they are concrete walls, block work & masonry walls or steel structures.
The following points are taken into consideration when designing a fixing system for natural stone installation.
• Stone dimensions.• Cavity structure: projection size and isolation. • Application type: horizontal or vertical joint installation.• Joint size.• Structural wall backing. • Height of facade.• Relevant dynamic loads such as wind and seismic loads.• Design criteria of the project.
HAZ Metal proposes and specially designs fixing systems according to individual projects requirements.
Direct fixing to concrete walls with bolts
Fixing to concrete with bolt anchors using expansion bolts. Insulation is cut at each anchoring point.
Direct fixing to concrete or masonry walls with mortar
Fixing to concrete with mortar anchors using mortar. Insulation is drilled at each anchoring point.
Indirect fixing to load bearing beams with channel system
Fixing to sub channel structure supported to load bearing beams. Insulation is cut at each anchoring point.
HZ Z Anchor Fixing System
AXO Body Anchor Fixing
HA L Anchor Fixing System
HSD Mortar Anchor Fixing System
HMP Sub Channel System
• Fixing to concrete with bolts.• Projection sizes up to 135mm.• Recommended for loads up to 800N.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Projection sizes up to 260 mm.• Recommended for loads up to 1300 N.• Installation at horizontal or vertical joints.• Optimum static performance.• Three dimensional adjustability.
• Fixing to concrete with bolts.• Can be used for 50 mm and larger stone thicknesses.• Various types to enable adjustability.• Installation at horizontal joints only.
• Fixing to masonry with mortar.• Various types to fit a range of loads and projection sizes.• Installation at horizontal or vertical joints.• Three dimensional adjustability.
• Fixing to sub channel structure which is attached to load bearing beams.• High load bearing capability to fit projection sizes up to 360 mm.• Greater projection sizes are achieved with special design.• Fully adjustable and allows fast installation.
3
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 5
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
1. Common Bent Plate Anchors
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 6
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HA L Anchor Fixing Systems - Introduction
27
HA L Anchor Fixing Systems - Introduction
• Direct fixing into concrete walls with expansion bolts. Indirect fixing onto sub channel system with hex bolts.• Economical & easy fixing.• Installation at horizontal joints.• Adjustability provided through adjustable plates and slot pin holes.
HA01 L Anchor HA02 L AnchorDouble Pin
HA03 L AnchorWith Kerf
HA04 L AnchorWith Adjustable Plate
HA05 L Anchor With Adj. Plate & Welded Tie
Adjustability
1. Vertical adjustment is made through the slot hole. The anchor is fixed on to the bolt with the serrated washer and nut.
2. A slot pin hole can be provided to enable lateral adjustment of the pin.
3. Greater projection sizes can be achieved by using shims. Shims are placed at the back of the anchor.
4. An adjustment plate is available in HA04 & HA05 type L anchors where adjustment of the projection size can be made.
Installation at horizontal joints
Fdw/2 Fdw/2
Load Bearing &Restraint
• Suitable for concrete walls. Recommended projection sizes up to 55 mm.• Slabs are pinned at the bottom and upper sides.• Adjustability for projection size can be done by inserting shims between the anchor and the wall.• Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
• Suitable for concrete walls. Recommended projection sizes up to 55 mm.• Slabs have slits and the kerf parts of the anchors are inserted in to the slit edgesof the slabs.• Adjustability for projection size can be done by inserting shims between the anchor and the wall.• Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
• Suitable for concrete walls. Recommended projection sizes up to180 mm.• Slabs are pinned from the bottom and upper sides.• Adjustability of the projection size is enabled with the adjustable plate, which is fixed to the body with hex bolts.• Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
HA01 L Anchors HA03 L Anchors HA04 L Anchors
27
HA L Anchor Fixing Systems - Introduction
• Direct fixing into concrete walls with expansion bolts. Indirect fixing onto sub channel system with hex bolts.• Economical & easy fixing.• Installation at horizontal joints.• Adjustability provided through adjustable plates and slot pin holes.
HA01 L Anchor HA02 L AnchorDouble Pin
HA03 L AnchorWith Kerf
HA04 L AnchorWith Adjustable Plate
HA05 L Anchor With Adj. Plate & Welded Tie
Adjustability
1. Vertical adjustment is made through the slot hole. The anchor is fixed on to the bolt with the serrated washer and nut.
2. A slot pin hole can be provided to enable lateral adjustment of the pin.
3. Greater projection sizes can be achieved by using shims. Shims are placed at the back of the anchor.
4. An adjustment plate is available in HA04 & HA05 type L anchors where adjustment of the projection size can be made.
Installation at horizontal joints
Fdw/2 Fdw/2
Load Bearing &Restraint
• Suitable for concrete walls. Recommended projection sizes up to 55 mm.• Slabs are pinned at the bottom and upper sides.• Adjustability for projection size can be done by inserting shims between the anchor and the wall.• Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
• Suitable for concrete walls. Recommended projection sizes up to 55 mm.• Slabs have slits and the kerf parts of the anchors are inserted in to the slit edgesof the slabs.• Adjustability for projection size can be done by inserting shims between the anchor and the wall.• Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
• Suitable for concrete walls. Recommended projection sizes up to180 mm.• Slabs are pinned from the bottom and upper sides.• Adjustability of the projection size is enabled with the adjustable plate, which is fixed to the body with hex bolts.• Anchors act as load bearing and restraint, carrying the slabs above and restraining the slabs below.
HA01 L Anchors HA03 L Anchors HA04 L Anchors
•Directfixingintoconcretewallswithexpansionbolts.Indirectfixingontosubchannelsystemwithhexbolts.•Fixingintowoodframingwithlagbolts.•Economical&easyfixing.•Installationathorizontalorverticaljoints.•Adjustabilityprovidedthroughadjustableplatesandslotpinholes.
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 7
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HA L Anchor Fixing Systems - InstallationHA L Anchor Fixing Systems - Installation Detail
A
A
Section A-A
Insulation
Wall
Anchor set
Stone slab
1- Through bolt
2- Anchor body
3- Serrated washer
4- Round washer for through bolt
5- Hex nut for through bolt
6- Plastic tube
7- Flanged pin
Installation at horizontal joints
In this instance the dead load of the slab is divided by two, as half the weight of the slab is transferred to the load bearing anchors.
Load Bearing& Restraint
Installation at horizontal joints
Installation at vertical joints
HA01L Anchor
Elevation view Section A-A Installation details
Elevation view Section A-A Installation details
HA04L Anchor
| 28Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 8
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HA01 L Anchor
29
HA01 L Anchor - Product Details
Fws/Fwp
¯
L
E.b.
T
St
Fdw
K
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads.
HA01 L Anchor• Load bearing & restraint• Limited adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 30 and 35 mm• Suitable for horizontal
• Loads up to 400 N• Stone thicknesses above 20 mm
Product Code Description Shape A Shape B Shape C
Cement Grout
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
Load Bearing
Restraining
Plastic Tube
• Other sizes are available for production upon request. • Bolts are provided separately.• Structural calculation reports are available upon order.
ProductCode
Technical Details
Projection Dead Load
WindPressure
WindSuction
Bolt Size PinDiameter
AnchorLength
K (mm) Fdw (N) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) L (mm)
HA01-301
HA01-351
HA01-401
HA01-451
HA01-501
HA01-551
HA01-302
HA01-352
HA01-402
HA01-452
HA01-502
HA01-552
HA01-303
HA01-353
HA01-403
HA01-453
HA01-503
HA01-553
HA01-304
HA01-354
HA01-404
HA01-454
HA01-504
HA01-554
30
35
40
45
50
55
30
35
40
45
50
55
30
35
40
45
50
55
30
35
40
45
50
55
AnchorThickness
T (mm)
100
200
300
400
156
312
468
624
110
219
328
437
M8X80
M8X80
M8X80
M8X80
4
4
5
5
36
41
46
51
56
61
38
43
48
53
58
63
38
43
48
53
58
63
38
43
48
53
58
63
2
2.5
3
4
3
4
3
4
HA01 - 30 1 AShapeDead Load (x10 Kg)Projection (K mm)Type
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 9
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HA02 & HA03 L AnchorHA02 & HA03 L Anchor - Product Details
E.b.
Fws/Fwp
¯
L
T
St
Fdw
K
ProductCode
Technical Details
Projection Dead Load WindPressure
WindSuction
Bolt Size PinDiameter
AnchorLength
K (mm) Fdw (N) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) L (mm)
AnchorThickness
T (mm)
HA02-302
HA02-352
HA02-402
HA02-452
HA02-502
HA02-552
HA02-304
HA02-354
HA02-404
HA02-454
HA02-504
HA02-554
30
35
40
45
50
55
30
35
40
45
50
55
38
43
48
53
58
63
38
43
48
53
58
63
200
400
312
624
219
437
M8X80
M8X80
4
6
3
4
Cement Grout
For anchoring into
concrete ≥ C20/25
St=20-50 mm
Load Bearing
Restraining
Plastic Tube
HA02 L Anchor• Load bearing & restraint.• Projection sizes between 30 and 55 mm.• Loads up to 400 N.• Suitable for horizontal joints.• Stone thicknesses above 20mm.• Fastened on walls with expansion bolts.• Stone installation is made with a single anchor on each side.
HA02 - 30 2 AShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A
Shape B
Shape C
E.b.
Fws/Fwp
¯
L
T
St
Fdw
K
ProductCode
Technical Details
Projection Dead Load WindPressure
WindSuction
Bolt Size PinDiameter
AnchorLength
K (mm) Fdw (N) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) L (mm)
AnchorThickness
T (mm)
HA03-302
HA03-352
HA03-402
HA03-452
HA03-502
HA03-552
HA03-304
HA03-354
HA03-404
HA03-454
HA03-504
HA03-554
30
35
40
45
50
55
30
35
40
45
50
55
32
37
42
47
52
57
32
37
42
47
52
57
200
400
312
624
219
437
M8X80
M8X80
12
15
3
4
Cement Grout
For anchoring into
concrete ≥ C20/25
St=20-50 mm
Load Bearing
Restraining
Plastic Tube
HA03 L Anchor• Load bearing & restraint.• Projection sizes between 30 and 55 mm.• Loads up to 400 N.• Suitable for horizontal joints.• Stone thicknesses above 20mm.• Fastened on walls with expansion bolts.• Installation is made with kerf system where there are slit edges in the slabs.
HA03 - 30 2 AShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A
Shape B
Shape C
3
4
| 30Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 10
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HA04 & HA05 L Anchor
31
HA04 & HA05 L Anchor - Product Details
HA04 L Anchor• Load bearing & restraint.• Projection sizes between 100 and 180 mm.• Loads up to 800 N.• Suitable for horizontal joints.• Stone thicknesses above 20mm.• Fastened on walls with expansion bolts.• Adjustability of the projection size is provided with the adjustable plate.
HA04 - 100 6 AShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A
Shape B
Shape C
HA05 L Anchor• Load bearing & restraint.• Projection sizes between 200 and 280 mm.• Loads up to 800 N.• Suitable for horizontal joints.• Stone thicknesses above 20mm.• Fastened on walls with expansion bolts.• Adjustability of the projection size is provided with the adjustable plate.
Shape A
Shape B
Shape C
ProductCode
Technical DetailsProjec-
tion
K (mm)
HA04-1006
HA04-1206
HA04-1406
HA04-1606
HA04-1806
HA04-1008
HA04-1208
HA04-1408
HA04-1608
HA04-1808
100
120
140
160
180
100
120
140
160
180
Min.Projec-
tion
K - (mm)
Max.Projec-
tion
K + (mm)
DeadLoad
Fdw (N)
WindPressure
Fwp (N)
WindSuction
Fws (N)
BoltSize
E.b. (mm)
PinDiameter
¿ (mm)
AnchorLength
L (mm)
Adj.Plate
Length
Lp (mm)
Adj.Plate
Thickness
T (mm)
85
105
125
145
165
85
105
125
145
165
115
135
155
175
195
115
135
155
175
195
70
90
110
130
150
70
90
110
130
150
600
800
936
1235
655
865
M12X120
M12X120
6
6
80
80
6
6
ProductCode
Technical DetailsProjec-
tion
K (mm)
HA05-2006
HA05-2206
HA05-2406
HA05-2606
HA05-2806
HA05-2008
HA05-2208
HA05-2408
HA05-2608
HA05-2808
200
220
240
260
280
200
220
240
260
280
Min.Projec-
tion
K - (mm)
Max.Projec-
tion
K + (mm)
DeadLoad
Fdw (N)
WindPressure
Fwp (N)
WindSuction
Fws (N)
BoltSize
E.b. (mm)
PinDiameter
¿ (mm)
AnchorLength
L (mm)
Adj.Plate
Length
Lp (mm)
Adj.Plate
Thickness
T (mm)
185
205
225
245
265
185
205
225
245
265
215
235
255
275
295
215
235
255
275
295
170
190
210
230
250
170
190
210
230
250
600
800
936
1235
655
865
M12X120
M12X120
6
6
80
80
6
6
HA05 - 200 6 AShapeDead Load (x10 Kg)Projection (K mm)Type
L
E.b.
Lp
Fws/Fwp
¯
T
St
Fdw
K
Fws/Fwp
L
Lp
E.b.
¯
T
St
Fdw
K
Cement Grout
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
Load Bearing
Restraining
Plastic Tube
Cement Grout
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
Load Bearing
Restraining
Plastic Tube
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 11
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HA Anchors - Special ApplicationHA Anchors - Special Application Details
Special Designs
L anchors are used to install thick stone slabs around corners.
L anchors are used to support large semi circular stones to forming a massive column block.
L anchors used for stone installation around column with variations in stone and projection.
HAZ 21 restraint anchor, designed for the purpose of installing into insulated walls more quickly. Insulation is drilled instead of cut. HAZ 21 anchors are generally used as restraints and are used for corbel facade installations.
L anchor is produced with three holes in order to accommodate a special requirement. Customized production is made in any case to fulfil the special requirement of the stone application.
L anchor with adjustable plate combine with a wedge washer instead of serrated washer. This is chosen in cases where vertical loads are too high for the serrated washer to sustain the no slip feature.
| 32Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 12
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HCA Corner Anchors
53
HCA Corner Anchors - Product Details
• For fixing small slabs on to supported facade slabs.• Used for reveal, column, soffit and sill slabs.• Slabs can be assembled in the work shop for faster installation on site.• Special drilling is required on the slabs, details of which are shown at the bottom of the page.
HCA01 Corner Anchor HCA02 Corner Anchor HCA03 Corner Anchor
HCA01 ApplicationReveal slabs can be connected to the supported slabs at columns. In this instance HCA01 corner anchors are used as load bearing and HCA02 are used as restraint.
HCA02 ApplicationSoffit slabs can be connected to the supported slabs at parapets. In this instance only HCA02 corner anchors are used as restraint.
HCA03 ApplicationThis anchor is used to fasten two slabs together at corners. The disk is inserted at a split edge on the slab. A special bolt is fixed between the anchor and the disk which firmly connects the slabs together.
Special Drilling for HCA01 & HCA02 Corner AnchorsSpecial drilling is done to the slabs at the upper face and at the back. The drilling must be done precisely as shown on the illustration. The adjustable arm inserted from the back of the stone meets the pin which is inserted from the edge surface of the stone.
ProductCode
Technical Details
Reveal Size
HCA013(4)x10x45
3(4)x15x60
3(4)x20x75
VerticalLoad Wind Load
AdjustableArm
StraightPin
StxWxL cm (N) (N) (mm) (mm)
38(50)
76(100)
130(170)
40
50
60
M8x45 ø5x80
ProductCode
Technical Details
Reveal Size
HCA023(4)x10x45
3(4)x15x60
3(4)x20x75
VerticalLoad Wind Load
AdjustableArm
StraightPin
StxWxL cm (N) (N) (mm) (mm)
38(50)
76(100)
130(170)
40
50
60
M8x45 ø5x80
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 13
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
2. Medium Load Anchors
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 14
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ Z Anchor Fixing Systems - Introduction
9
HZ Z Anchor Fixing Systems - Introduction
• Direct fixing into concrete walls with expansion bolts. Indirect fixing into sub channel system with hex bolts.• Three dimensional adjustability - Quick and easy fixing.• Installation at horizontal and vertical joints.• Recommended projection sizes up to 135 mm & loads up to 800 N.
HZ01Z Anchor
HZ02Z Anchor
HZ05 Z AnchorWith riveted nut
HZ07Soffit Anchor
HZ08 Z AnchorFor large projections
HRS1 Restraint Anchor
Three dimensional adjustability
1) Vertical adjustment is provided by the slotted hole. The anchor is fixed on to the bolt with the serrated washer at the desired level.
2) Adjustment of the projection size is provided by rotating the adjustable arm. The adjustable arm is locked with the hexagon nut.
3) Adjustment of the anchor left and right is provided by sliding the body up to 15 degrees side ways.
Installation at horizontal joints Installation at vertical joints
Load Bearing &Restraint Restraint Load
Bearing
• Suitable for concrete walls. Anchors are fixed directly on to concrete walls with expansion bolts.• Recommended projection size between 45 mm to 135 mm and loads up to 800 N.• In horizontal joint installation, slabs are pinned on the bottom and upper sides. Anchors act as load bearing carrying half the weight of the slabs above. Anchors also act as restraints, holding the slabs below and restraining against wind suction and pressure.• In vertical joint installation slabs are pinned on the left and right sides. Anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. Anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure.• Three - dimensional adjustability allows quick and easy installation.• The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing can be made for the requirements of each project.
9
HZ Z Anchor Fixing Systems - Introduction
• Direct fixing into concrete walls with expansion bolts. Indirect fixing into sub channel system with hex bolts.• Three dimensional adjustability - Quick and easy fixing.• Installation at horizontal and vertical joints.• Recommended projection sizes up to 135 mm & loads up to 800 N.
HZ01Z Anchor
HZ02Z Anchor
HZ05 Z AnchorWith riveted nut
HZ07Soffit Anchor
HZ08 Z AnchorFor large projections
HRS1 Restraint Anchor
Three dimensional adjustability
1) Vertical adjustment is provided by the slotted hole. The anchor is fixed on to the bolt with the serrated washer at the desired level.
2) Adjustment of the projection size is provided by rotating the adjustable arm. The adjustable arm is locked with the hexagon nut.
3) Adjustment of the anchor left and right is provided by sliding the body up to 15 degrees side ways.
Installation at horizontal joints Installation at vertical joints
Load Bearing &Restraint Restraint Load
Bearing
• Suitable for concrete walls. Anchors are fixed directly on to concrete walls with expansion bolts.• Recommended projection size between 45 mm to 135 mm and loads up to 800 N.• In horizontal joint installation, slabs are pinned on the bottom and upper sides. Anchors act as load bearing carrying half the weight of the slabs above. Anchors also act as restraints, holding the slabs below and restraining against wind suction and pressure.• In vertical joint installation slabs are pinned on the left and right sides. Anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. Anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure.• Three - dimensional adjustability allows quick and easy installation.• The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing can be made for the requirements of each project.
9
HZ Z Anchor Fixing Systems - Introduction
• Direct fixing into concrete walls with expansion bolts. Indirect fixing into sub channel system with hex bolts.• Three dimensional adjustability - Quick and easy fixing.• Installation at horizontal and vertical joints.• Recommended projection sizes up to 135 mm & loads up to 800 N.
HZ01Z Anchor
HZ02Z Anchor
HZ05 Z AnchorWith riveted nut
HZ07Soffit Anchor
HZ08 Z AnchorFor large projections
HRS1 Restraint Anchor
Three dimensional adjustability
1) Vertical adjustment is provided by the slotted hole. The anchor is fixed on to the bolt with the serrated washer at the desired level.
2) Adjustment of the projection size is provided by rotating the adjustable arm. The adjustable arm is locked with the hexagon nut.
3) Adjustment of the anchor left and right is provided by sliding the body up to 15 degrees side ways.
Installation at horizontal joints Installation at vertical joints
Load Bearing &Restraint Restraint Load
Bearing
• Suitable for concrete walls. Anchors are fixed directly on to concrete walls with expansion bolts.• Recommended projection size between 45 mm to 135 mm and loads up to 800 N.• In horizontal joint installation, slabs are pinned on the bottom and upper sides. Anchors act as load bearing carrying half the weight of the slabs above. Anchors also act as restraints, holding the slabs below and restraining against wind suction and pressure.• In vertical joint installation slabs are pinned on the left and right sides. Anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. Anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure.• Three - dimensional adjustability allows quick and easy installation.• The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing can be made for the requirements of each project.
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 15
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ Z Anchor Fixing Systems - InstallationHZ Z Anchor Fixing Systems - Installation Detail
A
A
Section A-A
Insulation
Wall
Anchor set
Stone slab
1- Through bolt
2- Anchor body
3- Serrated washer
4- Round washer
5- Hex nut for through bolt
6- Hex nut for adjustable arm
7- Adjustable arm
8- Plastic tube
9- Flanged pin
Adjustable armVariations
Shape A
Shape C
Shape E
Shape F
Shape H
Shape J
Shape K
Installation at horizontal joints
Load Bearing& Restraint
In this instance the dead load of the slab is divided by two, as half the weight of the slab is transferred to the load bearing anchors.
Installation at vertical joints
In this instance the dead load of the slab is divided by one, as the whole weight of the slab is transferred to the load bearing anchors.
Restraint
LoadBearing
Installation at horizontal joints
Installation at vertical joints
HZ02 Z Anchor
HZ02 Z Anchor
HRS01 Restraint Anchor
Elevation view Section a-a Installation details
Restraint
Load Bearing& Restraint
Load Bearing
Elevation view Section a-a Installation details
Restraint
Load Bearing
Load Bearing& Restraint
| 10Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 16
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ01 Z Anchor
11
HZ01 Z Anchor - Product Details
ProductCode
Technical details
Projec-tion
Min.Projec-
tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) M (mm) T (mm) EAL (mm)
HZ01-452
HZ01-552
HZ01-752
HZ01-952
HZ01-553
HZ01-753
HZ01-953
HZ01-1153
HZ01-554
HZ01-754
HZ01-954
HZ01-1154
HZ01-755
HZ01-955
HZ01-1155
HZ01-1355
45
55
75
95
55
75
95
115
55
75
95
115
75
95
115
135
40
45
60
80
50
60
80
100
50
60
80
100
60
80
100
120
55
70
90
110
70
90
110
130
65
90
110
130
90
110
130
150
10
20
40
60
20
40
60
80
10
20
40
60
20
40
60
80
200
300
400
500
312
468
624
780
219
328
437
546
M8X80
M8X80
M10X90
M10X90
5
5
5
5
M10
M10
M12
M12
3.5
3.5
4.5
4.5
60
60
60
60
60
70
70
70
70
90
90
90
90
90
90
90
E.b.
TFws/Fwp
M
¯
F
EAL
St
K
Fdw
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standards.• Loads stated are working resistance loads.• Other sizes are available for production upon request. • Bolts are provided separately.• Structural calculation reports are available upon order.
HZ01 Z Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 45 and 135 mm• Suitable for horizontal & vertical joints
• Loads up to 500 N• Stone thicknesses 20-50 mm
Product Code Description
HZ01 - 45 2 AShapeDead Load (x10 Kg)Projection (mm)Type
Shape A Shape B Shape C Shape D
Cementgroul
LoadBearing
Restraint
Plastictube
For anchoring intoconcrete ≥ C20/25
Drilled hole may berequired for closelyspaced walls.
St=20-50 mm
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 17
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ02 Z AnchorHZ02 Z Anchor - Product Details
ProductCode
Technical Details
Projec-tion
Min.Projec-
tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) M (mm) T (mm) EAL (mm)
HZ02-452
HZ02-552
HZ02-752
HZ02-952
HZ02-553
HZ02-753
HZ02-953
HZ02-1153
HZ02-554
HZ02-754
HZ02-954
HZ02-1154
HZ02-755
HZ02-955
HZ02-1155
HZ02-1355
HZ02-756
HZ02-956
HZ02-1156
HZ02-1356
HZ02-758
HZ02-958
HZ02-1158
HZ02-1358
45
55
75
95
55
75
95
115
55
75
95
115
75
95
115
135
75
95
115
135
75
95
115
135
40
45
60
80
45
60
80
100
45
60
80
100
60
80
100
120
60
80
100
120
60
80
100
120
55
70
90
110
70
90
110
130
65
90
110
130
90
110
130
150
90
110
130
150
90
110
130
150
10
20
40
60
20
40
60
80
10
20
40
60
20
40
60
80
20
40
60
80
20
40
60
80
200
300
400
500
600
800
312
468
624
780
936
1235
219
328
437
546
655
865
M8X80
M8X80
M8X80
M8X80
M10X90
M10X90
5
5
5
5
6
6
M10
M10
M12
M12
M14
M14
3.5
3.5
4.5
4.5
5.5
5.5
60
60
70
70
60
60
60
60
70
80
80
80
90
90
90
90
90
90
90
90
90
90
90
90
HZ02 Z Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 45 and 135 mm• Suitable for horizontal & vertical joints
• Loads up to 800 N• Stone thicknesses 20-50 mm
Product Code Description
HZ02 - 45 2 AShapeDead Load (x10 Kg)Projection (mm)Type
Shape A Shape B Shape C Shape D
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads. • Other sizes are available for production upon request. • Bolts are provided separately. • Structural calculation reports are available upon order.
E.b.
TFws/Fwp
M
¯
F
EAL
St
K
Fdw
Cementgroul
LoadBearing
Restraint
Plastictube
For anchoring intoconcrete ≥ C20/25
Drilled hole may berequired for closelyspaced walls.
St=20-50 mm
| 12Your Fixing Systems Specialist
Adj. ArmFlat
Thickness
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 18
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ02-S Z Anchor
17
HZ02-S-33010/10HZ02-S-33015/10HZ02-S-33020/10HZ02-S-33030/10HZ02-S-33040/10HZ02-S-33050/10HZ02-S-33060/10HZ02-S-33080/10HZ02-S-330100/10HZ02-S-330120/10HZ02-S-43020/12HZ02-S-43040/12HZ02-S-43060/12HZ02-S-43080/12HZ02-S-430100/12HZ02-S-430120/12
404550657585951251451656090110130150170
50505060606060707070608080808080
40455050607080110130150557595115135155
606570809010011014016018070105125145165185
500500500400400400300300250250500500400400300300
1015203040506080
10012020406080
100120
312 219 M8x80 ø 5x70
M10
M12
3.5
4.5
HZ02-S Z Anchor - Product Deatils
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
Dead Load
Offset Wind-Pressure
Wind-Suction
BoltSize
PinDiameter
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to LGA test results.• Loads stated are characteristic resistance loads.• Bolts are provided separately. • Max Wind pressure: 350 N •Test results are available upon order.
HZ02-S type Z anchors withstandard sizes. Differenttypes available according todesired method of fixation.Product Code DescriptionHZ02-S - 330 / 10 A
Shape A Shape B
Shape C Shape D
E.b.
TFws/Fwp
M
Ø
F
EAL
St
K
Fdw
9 mm
25
mm
70
AB
M
F
EA LØ
M T
LGA TEST REPORTNo : BBW 121 51 21
Date : 15.10.2006
CementGroutLoad
Bearing
Restraint
PlasticTube &
Cement Grout
For anchoring intoconcrete ≥ C20/25
Drilled hole may berequired for closelyspaced walls.
St=20-50 mm
HZ02-2S Type withoutserration and with plain washer.
HZ05-S Type withriveted nut. Serratedwith serratedwasher.
HZ05-2S Type withriveted nut. Withoutserration and withplain washer.
ShapeAdj. arm M size (mm)Anchor body size (mm)Anchor type
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 19
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ05 Z Anchor W. Riveted Nut
13
adjustabilit
HZ05 Z Anchor With Riveted Nut - Product Details
ProductCode
Technical Details
Projec-tion
Min.Projec-
tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) M (mm) T (mm) EAL (mm)
HZ05-452
HZ05-552
HZ05-752
HZ05-952
HZ05-553
HZ05-753
HZ05-953
HZ05-1153
HZ05-554
HZ05-754
HZ05-954
HZ05-1154
HZ05-755
HZ05-955
HZ05-1155
HZ05-1355
45
55
75
95
55
75
95
115
55
75
95
115
75
95
115
135
40
45
60
80
50
60
80
100
50
60
80
100
60
80
100
120
55
70
90
110
70
90
110
130
65
90
110
130
90
110
130
150
10
20
40
60
20
40
60
80
10
20
40
60
20
40
60
80
200
300
400
500
312
468
624
780
219
328
437
546
M8X80
M8X80
M8X80
M8X80
5
5
5
5
M10
M10
M12
M12
3.5
3.5
4.5
4.5
60
60
60
60
70
70
70
70
70
90
90
90
90
90
90
90
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads.• Other sizes are available for production upon request. • Bolts are provided separately.• Structural calculation reports are available upon order.
HZ05 Z Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 45 and 135 mm• Suitable for horizontal & vertical joints
• Loads up to 500 N• Stone thicknesses 20-50 mm
Product Code Description
HZ05 - 45 2 AShapeDead Load (x10 Kg)Projection (mm)Type
Shape A Shape B Shape C Shape D
E.b.
TFws/Fwp
M
¯
F
EAL
St
K
Fdw
Cementgroul
LoadBearing
Restraint
Plastictube
For anchoring intoconcrete ≥ C20/25
Drilled hole may berequired for closelyspaced walls.
St=20-50 mm
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 20
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ07 Z Anchor For Soffits
15
HZ07 Z Anchor For Soffits - Product Details
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)HZ07-452HZ07-552HZ07-752HZ07-952HZ07-553HZ07-753HZ07-953HZ07-1153HZ07-554HZ07-754HZ07-954HZ07-1154
45557595557595115557595115
40456080506080100506080100
55709011070901101306590110130
102040602040608010204060
200
300
400
312
468
624
219
328
437
M8X80
M8X80
M8X80
5
5
5
M10
M10
M12
3.5
3.5
4.5
606060607070707070909090
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads.• Other sizes are available for production upon request. • Bolts are provided separately.• Structural calculation reports are available upon order.
K
Fdw
EAL
M
T
St
Plastic Tube
.b.E.b.E
ØF
Cement Grout
HZ07 Z Anchor - Soffit Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 45 and 115 mm• Suitable for horizontal & vertical joints • Loads up to 400 N
• Stone thicknesses 20-50 mmProduct Code DescriptionHZ07 - 45 2 A
ShapeDead Load (x10 Kg)Projection (mm)Type
Shape A Shape B Shape C Shape D
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 21
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ08 Z Anchor
| 16Your Fixing Systems Specialist
M
HZ08 Z Anchor - Product Details
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)155175195215115135155175115135155175115135155175
85105125230100120140160100120140160100120140160
170190210230130150170190130150170190130150170190
6080
1001206080
1001206080
1001206080
100120
200
300
400
500
312
468
624
780
219
328
437
546
M8X80
M8X80
M8X80
M8X80
5
5
5
5
M10
M12
M12
M14
3.5
3.5
4.5
4.5
60606060707070707090909090909090
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads.• Other sizes are available for production upon request. • Bolts are provided separately.• Structural calculation reports are available upon order.
HZ08 Z Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 115 and 175 mm• Suitable for horizontal & vertical joints
• Loads up to 500 N• Stone thicknesses 20-50 mm
Product Code Description
HZ08 - 115 2 AShapeDead Load (x10 Kg)Projection (mm)Type
Shape A Shape B Shape C Shape D
E.b.
TFws/Fwp
M
Ø
F
EAL
St
K
Fdw
CementgroulLoad
Bearing
Restraint
Plastictube
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
HZ08-1152HZ08-1352HZ08-1552HZ08-1752HZ08-1153HZ08-1353HZ08-1553HZ08-1753HZ08-1154HZ08-1354HZ08-1554HZ08-1754HZ08-1155HZ08-1355HZ08-1555HZ08-1755
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 22
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
3. High Load Anchors
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 23
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
AXO Body Anchor Fixing Systems - Introduction
19
AXO Body Anchor Fixing Systems - Introduction
• Direct fixing in to concrete walls with expansion bolts. Indirect fixing on to sub channel systems with hex bolts.• Three dimensional adjustability - Quick and easy fixing.• Installation at horizontal and vertical joints.• Optimum static performance and low engineering for higher loads and larger projection sizes.• Recommended projection sizes up to 260 mm and loads up to 1300 N.
AXO1Body Anchor
Three dimensional adjustability
1) Vertical adjustment is provided through the body space. The anchor is fixed onto the bolt through the wedge washer and the lock washer at the desired level.
Installation at horizontal joints Installation at vertical joints
Restraint LoadBearing
• Suitable for concrete walls. Anchors are fixed on to concrete walls with expansion bolts.• Projection sizes between 60 and 260 mm and loads up to 1300 N.• In horizontal installation, slabs are pinned on the bottom and upper sides. The anchors act as load bearing, carrying half the weight of the slabs above. Anchors also act as restraint holding the slabs below and restraining against wind suction and pressure.• In vertical installation, slabs are pinned at the left and right sides. The anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. The anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure.• Three dimensional adjustability allows quick and easy installation.• The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing can be made for the requirements of the project.
AXO2Body Anchor
AXO3Body Anchor
AXO4Body Anchor
HRS3Restraint Anchor
Load Bearing &Restraint
2) Adjusting the projection size by simply moving the adjustable arm without rotating. The adjustable arm is safely fixed to the anchor body with the lock nut and hex bolt.
3) Adjusting the anchor left and right is provided by sliding the body up to 15 degrees left or right.
19
AXO Body Anchor Fixing Systems - Introduction
• Direct fixing in to concrete walls with expansion bolts. Indirect fixing on to sub channel systems with hex bolts.• Three dimensional adjustability - Quick and easy fixing.• Installation at horizontal and vertical joints.• Optimum static performance and low engineering for higher loads and larger projection sizes.• Recommended projection sizes up to 260 mm and loads up to 1300 N.
AXO1Body Anchor
Three dimensional adjustability
1) Vertical adjustment is provided through the body space. The anchor is fixed onto the bolt through the wedge washer and the lock washer at the desired level.
Installation at horizontal joints Installation at vertical joints
Restraint LoadBearing
• Suitable for concrete walls. Anchors are fixed on to concrete walls with expansion bolts.• Projection sizes between 60 and 260 mm and loads up to 1300 N.• In horizontal installation, slabs are pinned on the bottom and upper sides. The anchors act as load bearing, carrying half the weight of the slabs above. Anchors also act as restraint holding the slabs below and restraining against wind suction and pressure.• In vertical installation, slabs are pinned at the left and right sides. The anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. The anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure.• Three dimensional adjustability allows quick and easy installation.• The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing can be made for the requirements of the project.
AXO2Body Anchor
AXO3Body Anchor
AXO4Body Anchor
HRS3Restraint Anchor
Load Bearing &Restraint
2) Adjusting the projection size by simply moving the adjustable arm without rotating. The adjustable arm is safely fixed to the anchor body with the lock nut and hex bolt.
3) Adjusting the anchor left and right is provided by sliding the body up to 15 degrees left or right.
19
AXO Body Anchor Fixing Systems - Introduction
• Direct fixing in to concrete walls with expansion bolts. Indirect fixing on to sub channel systems with hex bolts.• Three dimensional adjustability - Quick and easy fixing.• Installation at horizontal and vertical joints.• Optimum static performance and low engineering for higher loads and larger projection sizes.• Recommended projection sizes up to 260 mm and loads up to 1300 N.
AXO1Body Anchor
Three dimensional adjustability
1) Vertical adjustment is provided through the body space. The anchor is fixed onto the bolt through the wedge washer and the lock washer at the desired level.
Installation at horizontal joints Installation at vertical joints
Restraint LoadBearing
• Suitable for concrete walls. Anchors are fixed on to concrete walls with expansion bolts.• Projection sizes between 60 and 260 mm and loads up to 1300 N.• In horizontal installation, slabs are pinned on the bottom and upper sides. The anchors act as load bearing, carrying half the weight of the slabs above. Anchors also act as restraint holding the slabs below and restraining against wind suction and pressure.• In vertical installation, slabs are pinned at the left and right sides. The anchors on the bottom are load-bearing anchors carrying the whole weight of the slab. Half the weight of the slab on the left and half the weight of the slab on the right. The anchors on the top are restraint anchors holding the slabs and restraining against wind suction and pressure.• Three dimensional adjustability allows quick and easy installation.• The design and structural calculations of these anchors are made in our technical department. Special design and manufacturing can be made for the requirements of the project.
AXO2Body Anchor
AXO3Body Anchor
AXO4Body Anchor
HRS3Restraint Anchor
Load Bearing &Restraint
2) Adjusting the projection size by simply moving the adjustable arm without rotating. The adjustable arm is safely fixed to the anchor body with the lock nut and hex bolt.
3) Adjusting the anchor left and right is provided by sliding the body up to 15 degrees left or right.
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 24
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
AXO Body Anchor Fixing Systems - InstallationAXO Body Anchor Fixing Systems - Installation Details
A
A
Section A-A
Insulation
Wall
Anchor set
Stone slab
1- Through bolt
2- Wedge washer
3- Anchor body
4- Lock washer
5- Round washer for through bolt
6- Hex nut for through bolt
7- Locking plate
8- Hex bolt
9- Adjustable arm
10- Plastic tube
11- Flanged pin
Adjustable armVariations
Shape A
Shape C
Shape E
Shape F
Shape H
Shape J
Shape K
Installation at horizontal joints
Load Bearing& Restraint
In this instance the dead load of the slab is divided by two, as half the weight of the slab is transferred to the load bearing anchors.
Installation at vertical joints
In this instance the dead load of the slab is divided by one, as the whole weight of the slab is transferred to the load bearing anchors.
Restraint
LoadBearing
Installation at horizontal joints
Installation at vertical joints
AXO4Body Anchor
HRS3 Restraint Anchor
AXO4Body Anchor
Elevation view Section a-a Installation details
Restraint
Load Bearing& Restraint
Load Bearing
Elevation view Section a-a Installation details
Restraint
Load Bearing
Load Bearing& Restraint
| 20Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 25
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
BA Body Anchor
21
BA Body Anchor - Product Details
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)
BA-609BA-858BA-1207BA-1607
6085120160
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to LGA test results.• Loads stated are characteristic resistance loads.• Bolts are provided separately.• Test results are available upon order.
BA Body Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 60 and 160 mm• Suitable for horizontal & vertical joints
• Loads up to 900 N• Stone thicknesses 20-50 mm
Product Code Description
BA - 60 9 AShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A Shape B Shape C Shape D
Cementgroul
LoadBearing
Restraint
Plastictube
BODY 1BODY 2BODY 3BODY 4
XSize
x (mm)
507095145
75100135175
900800700700
284675
115
1100700650600
770700650600
M8X80 5 M12 4.5
60758585
50
F
TFws/Fwp
Ø
M
EALØ
Fdw
K
St
Fdw
F
TFws/Fwp
Ø
EAL
M
St
E.b.
K
M
x
E.b.
x
St=20-50 mm
For anchoring intoconcrete ≥ C20/25
Cementgroul
LoadBearing
Restraint
Plastictube
St=20-50 mm
For anchoring intoconcrete ≥ C20/25
LGA TEST REPORTNo : BBW 0541135-01
Date : 09.05.2005
Body 1607Body 1207
Body 858 Body 609
• Optimum static performance & low engineering feature
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 26
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
AXO1 & AXO2 Body Anchor
AX01Body Anchor
AX02Body Anchor
AXO1 & AXO2 Body Anchor - Product Details
F
TFws/Fwp
Ø
M
EALØ
Fdw
K
St
Fdw
F
TFws/Fwp
Ø
EAL
M
St
K
M
x
x
E.b.
E.b.
Cementgroul
LoadBearing
Restraint
Plastictube
St=20-50 mm
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
For anchoring intoconcrete ≥ C20/25
Cementgroul
LoadBearing
Restraint
Plastictube
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)
AXO1-705AXO1-1105AXO1-7013AXO1-11013AXO2-1505AXO2-15013
7011070
110150150
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads. • Other sizes are available for production upon request. • Bolts are provided separately. • Structural calculations are available upon order.
XSize
x (mm)
55955595135135
8512585125165165
20602060100100
M8X80 5 M12 4.5
• Optimum static performance & low engineering.
AXO1 & AXO2 Body Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 70 and 150 mm• Suitable for horizontal & vertical joints
• Loads up to 1300 N• Stone thicknesses 20-50 mm
Product Code DescriptionAXO1 - 60 9 A
ShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A Shape B Shape C Shape D
M10X90 6 M16 6
M8X80 5 M12 4.5M10X90 6 M16 6
546
1419
5461419
780
2028
7802028
500
1300
5001300
85
85
85
50
50
50
| 22Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 27
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
AXO3 Body Anchor
23
AXO3 Body Anchor - Product Details
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)
AXO3-2005AXO3-2205AXO3-2405AXO3-2605AXO3-2009AXO3-2209AXO3-2409AXO3-2609AXO3-20013AXO3-22013AXO3-24013AXO3-26013
200220240260200220240260200220240260
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard• Loads stated are working resistance loads.• Bolts are provided separately.• Structural calculations are available upon order.
XSize
x (mm)
180200220240180200220240180200220240
220240260280220240260280220240260280
500
900
155175195215155175195215155175195215
AXO3 Body Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 200 and 260 mm• Suitable for horizontal & vertical joints
• Loads up to 1300 N• Stone thicknesses 20-50 mm
Product Code DescriptionAXO3 - 200 5 A
ShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A Shape B Shape C Shape D
780
1430
546
1000
M8X120
M10X130
5
6
M12
M14
4.5
5.5
80
80
75
75
500 2028 1419 M12X145 6 M16 6 80 80
F
TFws/Fwp
ØEAL
E.b.
M
Fdw
K
St
x
CementGrout
LoadBearing
Restraint
PlasticTube &
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 28
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
AXO4 Body AnchorAXO4 Body Anchor - Product Details
Fws/Fwp M
EAL
F
E.b.
Ø
Fdw
K
St
T
x
CementGrout
LoadBearing
Restraint
PlasticTube &
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
ProductCode
Technical DetailsProjec-
tionMin.
Projec-tion
Max.Projec-
tion
DeadLoad
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fdw (N) F (mm) Fwp (N) Fws (N) E.b. (mm) ø (mm) M (mm) T (mm) EAL (mm)
AXO4-1605AXO4-1805AXO4-2005AXO4-2205AXO4-2405AXO4-2605AXO4-1609AXO4-1809AXO4-2009AXO4-2209AXO4-2409AXO4-2609AXO4-16013AXO4-18013AXO4-20013AXO4-22013AXO4-24013AXO4-26013
160180200220240260160180200220240260160180200220240260
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads.• Other sizes are available for production upon request. • Bolts are provided separately. • Structural calculations are available upon order.
XSize
x (mm)
140160180200220240140160180200220240140160180200220240
180200220240260280180200220240260280180200220240260280
500
900
1300
115135155175195215115135155175195215115135155175195215
AXO4 Body Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 160 and 260 mm• Suitable for horizontal & vertical joints
• Loads up to 1300 N• Stone thicknesses 20-50 mm
Product Code DescriptionAXO4 - 160 5 A
ShapeDead Load (x10 Kg)Projection (K mm)Type
Shape A Shape B Shape C Shape D
780
1430
2028
546
1000
1419
M8X120
M10X130
M12X145
5
6
6
M12
M14
M16
4.5
5.5
6
100
100
100
75
75
80
| 24Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 29
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
AXO Body Anchor - Special ApplicationAXO Body Anchor - Special Application Details
Special Designs
Body anchors are used for stone installation around columns.
Body anchors are used to form an oval column in natural stone.
Body anchors used for installation of parapet area.
t:5mm
t:5mm
Body anchor with welded plate and riveted nut. A feature of HZ05 which is chosen for the fine adjustment of the projection by spinning or rotating the riveted nut while pins are set on the stone.
Body anchor with welded shims and HB09 execution. With this type of anchor, stone panels are supported from the rear surface using HB09 bolts instead of from the edges using pins.
Body anchor with welded plate with two pins. Used for stone installation with single anchor. This type used for installation of reveals with maximum width of 25 cm.
| 26Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 30
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Fixing Systems For Heavy Stone Panels
51
Fixing Systems For Heavy Stone Panels - Product Range
Fixing systems for the installation of high load natural stone or reconstructed stone are available in a variety of types and size ranges. The actual system proposal will be made according to the technical requirements of the project. The use of these fixing systems is for high load coping and cornice stones. Load bearing and restraint anchors are used to install the slabs on to different wall backings using a variety of attachment methods.
Application Examples
Periscope Anchors
Heavy Load Bearing Anchors
Restraint Anchors
HPC1 HPC2 HPC3 HPC4
HMCS-SB/P HMCS-DB HAMF
HA-RST HAZ21
HMS-UP
HA-RST/K HA-RST/K B
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 31
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Fixing Systems For Reconstructed Stone - Information
| 52Your Fixing Systems Specialist
Fixing options Fixing with Expansion bolts
Fixing with Cast in channels
expansion joint
Projection K
Projection K
Stone Thickness St
Heavy Duty brackets used for load bearing are fixed on to load bearing concrete walls. The two main methods that are usually used for attachmetns are either by anchor bolts or cast in channels.
Both cast in channels and anchors bolts specified accord-ing to the load requirements of the projects and must be structurally verified according to the loads concerned on the project.
Heavy Duty brackets have limited adjustability to take the irregularities of the walls. An accepted method is use of shims to adjust the projection sized by up to 5 mm.
Greater adjustability can be achieved by special design as illustrated on the diagram on the right. A n adjustable plate can be adapted to adjust in and out the distance of the projection size.
There are many systems to be used for restaining the stone slabs that are supported on a corble system. channel systems can be used as they are sutaible to be fixed on commonly used steel sections.
Restraint anchors or wall ties can be easily fixed on to the channel at desired position which enables greter flexibility and easiniess in installing the slabs.
Restraint brackets are used for restraining stone slabs directly on to wall backings. There are various types of brackets that can be used for qucik and easy installation.
Depending on the cavity and the excistence of insulation on the wall, different type of restraint brackets are prefered for installtion.
Load Bearing Anchors
Restraining Brackets
Fixing Systems For Heavy Stone Panels
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 32
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
4. Special Applications
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 33
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HZ Z Anchor - Special Applications DetailsHZ Z Anchor - Special Applications Details
Special Designs
Z Anchors are fixed on sub frame toinstall cornice lining.
Z Anchors are fixed on to special steelstructure for cornice parapet installation.
Z Anchors are fixed on to special steelstructure for special area installation.
HZ09 Z Anchor - with wedge washer.Required where loads are over 800 N where serrated washersmay not be strong enough for no slip feature.
HZ06 Special Z Anchor - for large projection sizes with optimal static performanceRequired for projections over 150 mm.
HZ03 Special Z AnchorUsed for istalling soffit and facade panels witha single anchor
| 18Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 34
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HRS1 Restraint Anchor
* In case back adjustment shorter adj. arm length should be used.
HRS1 Restraint Anchor - Product Details
ProductCode
Technical Details
Projec-tion
Min.Projec-
tion
Max.Projec-
tion
FormingSize
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) F (mm) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) M (mm) T (mm) EAL (mm)
HRS1-55
HRS1-75
HRS1-95
HRS1-115
HRS1-135
55
75
95
115
135
HRS1 Restraint Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 45 and 135 mm• Suitable for horizontal & vertical joints
• Loads up to 312 N• Stone thicknesses 20-50 mm
Product Code Description
HRS1 - 45 A
ShapeProjection (K mm)Type
Shape A Shape B Shape C Shape D
50
60
80
100
115
60
90
110
130
150
20
40
60
60
60
312 219 M8X80 5 M8 3
60
60
60
80
100
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4).• Table above is prepared according to DIN 18516 standard.• Loads stated are working resistance loads.• Other sizes are available for production upon request. • Bolts are provided separately.• Structural calculation reports are available upon order.
F
Fws/Fwp
K
M
EAL
E.b.
St
T
¯
For anchoring intoconcrete ≥C20/25
St=20-50 mm
CementGrout
PlasticTube
Restraint
• Available in sizes to fit the projection range of all HZ anchors.
| 14Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 35
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HRS3 Restraint Anchor
25
HRS3 Restraint Anchor - Product Details
HRS3 Restraint Anchor• Load bearing & restraint• Three dimensional adjustability• Fastened on to load bearing walls with expansion bolts and on to channels with set screws
• Projection sizes between 60 and 260 mm• Suitable for horizontal & vertical joints
• Loads up to 2028 N• Stone thicknesses 20-50 mm
Product Code Description
HRS03 - 60 A
ShapeProjection (Kmm)Type
Shape A Shape B Shape C Shape D
T
¯
E.b.
F
Fws/Fwp
EAL
M
K
St
x
CementGrout
Restraint
PlasticTube &
For anchoring intoconcrete ≥ C20/25
St=20-50 mm
ProductCode
Technical Details
Projec-tion
Min.Projec-
tion
Max.Projec-
tion
Wind-Pressure
Wind-Suction
ExpansionBolt Size
PinSize
Adj. ArmMetricSize
Adj. ArmFlat
Thickness
Adj. ArmLength
K (mm) K - (mm) K + (mm) Fwp (N) Fws (N) E.b. (mm) ¿ (mm) M (mm) T (mm) EAL (mm)
HRS03-60
HRS03-80
HRS03-100
HRS03-120
HRS03-140
HRS03-160
HRS03-180
HRS03-200
HRS03-220
HRS03-240
HRS03-260
60
80
100
120
140
160
180
200
220
240
260
65
85
100
120
140
160
170
190
210
220
240
40
60
80
100
120
140
160
180
200
220
240
80
100
120
140
160
180
200
220
240
260
280
25
32
40
50
2028
FormingSize
F (mm)
XSize
x (mm)
1419 M8X80 5 M8 3 30
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4)• Table above is prepared according to DIN 18516 standard• Loads stated are working resistance loads• Other sizes are available for production upon request • Bolts are provided separately• Structural calcultion reports are available upon order
• Available in sizes to fit the projection range of all AXO anchors.
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 36
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
5. Sub-channel Systems
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 37
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HMP Sub Channel Fixing Systems - Introduction
41
HMP Sub Channel Fixing Systems - Introduction
• Indirect fixing on to non-load bearing walls or for large projection sizes• Lower drilling points enable fast installation• Installation at vertical and horizontal joints• Special design is made for sub channel systems to suit various application requirements.
HMPA HMPB HMPC HMPL HMPA-HC2 HMPC-HC1 HMPA-HC3
HCSP1 HCSP2 HCSP3 HCSP4
HCRS1 HCRS2 HCRS3 HCRS4
HMPA-HC2 Channel System HMPC-HC1 Channel System
Stone installation is made with HZ02 & HRS1
Anchors on to channels with hex bolts
Channels are tied on to walls with HCRS2
Channel restraints to eleminate deflection
Vertical channels supported on to load
bearing beams with HCSP1 channel
supports using expansion bolts
Horizontal c channels are fixed on to the
vertical channels with HCC channel
connections with lock nuts sets
Stone installation is made with HZ01
Anchors on to channels with locj nuts hex
bolts
Channels supported on to load bearing
concrete beams with HCSP2 channel supports
using anchor bolts
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 38
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HMP Sub Channel Systems - Installation
Installation at vertical Joints
HMP Sub Channel Systems - Installation Details
Insulation
Wall
Anchor Set
Stone Slab
1- Through Bolt2- Channel Support3- Plain Washer4- Washer5- Nut6- Bolt Set7- Channel Restraint8- Channel9- Anchor Body10-Serrated Washer11-Adjustable Arm12-Plastic Tube13- Flanged Pin
A
A
Section A-A
Installation at horizontal Joints
Fdw/1 Fdw/1
Fdw/1 Fdw/1
• Sub channel systems are fixed to load bearing beams for support.
• Channels are fixed on to beams with channel supports.
• Fixing of channels in the middle to the wall with channel restraints are made to reduce deflection.
• When installation is at vertical joints, the sub channel system bears the whole load of the slabs installed.
• When installation is at horizontal joints, the sub channel system bears half the load of the slabs installed.
Installation at vertical Joints
Installation at horizontal Joints
HCSP2 Channel Support
HCRS2 Channel Restraint
HMPA U Channel
HZ02 Z Anchor
HCSP1 Channel Support
HCRS1 Channel Restraint
HMPB C Channel
HZ02 Z Anchor
| 42Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 39
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
ATS Sub Channel Systems - Product Information
43
ATS Sub Channel Systems - Product Information
The ATS Channel system allows the quick and easy installation of natural stone facades through its adjustable capability and uncomplicated assembly features.
• The channel system is supported by the ATS-A channel support brackets.
• ATS-B channel restraint brackets, restrain the channel system against wind pressure and helps prevent the channel from buckling.
• The HMPS toothed channel enables the fixing of the anchors with hex bolts and lock nuts without the need for drilled holes and the use of nuts and washers.
• Toothed channel and lock nuts provide vertical load support after fixing.
ATS Channel System Elements
ATS Fixing System Elements
HMPS 41/22 & HMPS 41/41Toothed Channel
ATS-AChannel Support
ATS-BChannel Restraint
ATS-HZZ Anchor
ATS-HASpecial Anchor
ATS-TSSpecial Anchor
ATS-A Channel Support
ATS-B Channel Restraint
ATS-HZ Z Anchor
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 40
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HMP ChannelsHMP Channels - Product Details
ProductCode
Technical Details
Dimensions
HMPA-2.5-40/30HMPA-2.5-40/40HMPA-3-35/35HMPA-3-40/30HMPA-3-40/40HMPA-3-50/50HMPA-4-40/40HMPA-4-50/50HMPA-5-50/50
2.502.503.003.003.003.004.004.005.00
HMPA U Channel
X-X Axis Y-Y Axis
ThicknessT (mm)
WidthW (mm)
HeightH (mm) IXX (cm4) ZX (cm3) X (mm) IYY (cm4) ZY (cm3) Y (mm)
40.0040.0035.0040.0040.0050.0040.0050.0050.00
30.0040.0035.0030.0040.0050.0040.0050.0050.00
1.573.912.831.794.559.685.67
12.3314.68
0.741.501.240.851.742.972.193.814.57
20.0020.0017.5020.0020.0025.0020.0025.0025.00
4.215.974.274.866.92
15.048.60
18.9722.40
2.112.992.442.433.466.014.307.608.97
8.8013.8412.148.83
13.9317.4214.1017.6517.87
ProductCode
Technical Details
Dimensions
HMPB-2.5-28/15HMPB-3-38/17HMPB-2.5-41/21HMPB-3-41/21
2.503.002.503.00
HMPB C Channel
X-X Axis Y-Y Axis
ThicknessT (mm)
WidthW (mm)
HeightH (mm) IXX (cm4) ZX (cm3) X (mm) IYY (cm4) ZY (cm3) Y (mm)
28.0038.0041.0041.00
15.0017.0021.0021.00
0.330.761.321.48
0.430.821.191.33
14.0019.0020.5020.50
1.434.595.716.55
1.022.422.793.19
7.387.799.859.86
ProductCode
Technical Details
Dimensions
HMPC-2.5-41/22HMPC-2.5-41/41HMPC-3-41/22HMPC-3-41/41
2.502.503.003.00
HMPC C Channel
X-X Axis Y-Y Axis
ThicknessT (mm)
WidthW (mm)
HeightH (mm) IXX (cm4) ZX (cm3) X (mm) IYY (cm4) ZY (cm3) Y (mm)
41.0041.0041.0041.00
22.0041.0022.0041.00
1.257.921.699.40
0.993.621.434.20
20.5020.5020.5020.50
5.609.406.94
11.30
2.724.583.405.50
8.1619.029.16
18.80
ProductCode
Technical Details
Dimensions
HMPL-2.5-30/30HMPL-2.5-30/40HMPL-3-30/30HMPL-3-40/40HMPL-3-50/50HMPL-4-40/40HMPL-50/50HMPL-5-50/50
2.502.503.003.003.004.004.005.00
HMPL L Channel
X-X Axis Y-Y Axis
ThicknessT (mm)
WidthW (mm)
HeightH (mm) IXX (cm4) ZX (cm3) X (mm) IYY (cm4) ZY (cm3) Y (mm)
30.0030.0030.0040.0050.0040.0050.0050.00
30.0040.0030.0040.0050.0040.0050.0050.00
0.931.041.092.886.043.727.859.57
0.440.390.521.021.691.342.222.73
21.2226.3320.7928.1635.7227.7935.4035.03
0.932.161.092.886.043.727.859.57
0.440.390.521.021.691.342.222.73
8.787.239.21
11.8414.2812.2114.6014.97
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4) and Hot dip galvanized mild steel. •Table below is prepared according to values with Ø11 drilled holes. • Channels can be provided up to 6 metres length.• Load capacity for wind loads and dead loads needs to be verified with stuctural calculations.
| 44Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 41
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HCSP Channel Supports
45
HCSP Channel Supports - Product Details
ProductCode
Technical Details
Thickness
HCSP1-50HCSP1-60HCSP1-70HCSP1-80HCSP1-90HCSP1-100HCSP1-110HCSP1-120HCSP1-130
445555666
HCSP1 Channel Support
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
HoleDia.
¿ (mm)
404045454545454545
8090
100100100100100100100
5060708090
100110120130
111111111111111111
303030303030303030
111111111111111111
ProductCode
Technical Details
Thickness
HCSP2-40HCSP2-60HCSP2-80HCSP2-100HCSP2-120HCSP2-140
444455
HCSP2 Channel Support
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
HoleDia.
¿ (mm)
160160160160160160
858585858585
406080
100120140
111111111111
303030303030
111111111111
Thr. RodMetric Size
MxL (mm)
M10x70M10X90M10X110M10X130M10X150M10X170
ProductCode
Technical Details
Thickness
HCSP3-70HCSP3-90HCSP3-110HCSP3-130HCSP3-150
44555
HCSP3 Channel Support
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
HoleDia.
¿ (mm)
120120120120120
5050505050
7090
110130150
1111111111
2525252525
1111111111
Slot HoleLength
SL2 (mm)
3030303030
ProductCode
Technical Details
Thickness
HCSP4-95HCSP4-115HCSP4-135HCSP4-155HCSP4-175HCSP4-195
2.52.52.5333
HCSP2 Channel Support
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
HoleDia.
¿ (mm)
474747484848
200200200200200200
95115135155175195
111111111111
454545454545
111111111111
Thr. RodMetric Size
MxL (mm)
303030303030
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4) and Hot dip galvanized mild steel. •Table below is prepared according to values with Ø11 drilled holes. • Channels can be provided up to 6 metres length.• Shear capacity for dead loads needs to be verified with stuctural calculations.
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 42
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HCRS Channel RestraintHCRS Channel Restraint - Product Details
ProductCode
Technical Details
Thickness
HCRS1-50HCRS1-60HCRS1-70HCRS1-80HCRS1-90HCRS1-100HCRS1-110HCRS1-120HCRS1-130
2.52.53333333
HCRS1 Channel Restraint
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
HoleDia.
¿ (mm)
404040404040404040
606060606060606060
5060708090
100110120130
111111111111111111
303030303030303030
111111111111111111
ProductCode
Technical Details
Thickness
HCRS2-40HCRS2-60HCRS2-80HCRS2-100HCRS2-120HCRS2-140
333333
HCRS2 Channel Restraint
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
Thr. RodM. Size
M (mm)
858585858585
160160160160160160
406080
100120140
111111111111
303030303030
M10x70M10X90
M10X110M10X130M10X150M10X170
ProductCode
Technical Details
Thickness
HCRS3-70HCRS3-90HCRS3-110HCRS3-130HCRS3-150
33333
HCRS3 Channel Restraint
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
Slot HoleDia.
S ¿ 2 (mm)
4040404040
4040404040
7090
110130150
99999
2525252525
99999
Slot HoleLength
SL2 (mm)
2525252525
ProductCode
Technical Details
Thickness
HCRS4-95HCRS4-115HCRS4-135HCRS4-155HCRS4-175HCRS4-195
2.52.52.52.52.52.5
HCRS4 Channel Restraint
T (mm)
Width
W (mm)
Height
H (mm)
Forming
F (mm)
Slot HoleDia.
S ¿ (mm)
Slot HoleLength
SL (mm)
Slot HoleDia.
S ¿ 2 (mm)
474747474747
303030303030
95115135155175195
999999
202020202020
999999
Slot HoleLength
SL2 (mm)
454545454545
• Material: Stainless Steel 1.4301 (A2) & 1.4401 (A4) and hot dip galvanised ST37 mild steel.• Other sizes are available for production upon request. • Expansion bolts & bolt sets are provided separately.• Tensile capacity for wind loads need to be verified with stuctural calculations.
| 46Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 43
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
47
HMP Sub Channel Systems - Application Examples
HMPA-HC2 sub channel fixing system :
• High load bearing and adjustable sub channel system.
• Fast and easy fixing of stone slabs.
• Minimum projection size is 90 mm and maximum is 350 mm.
• Ideal for heavy loads and large projection sizes.
• Anchors are fixed to channels with hex bolts. and hex nuts.
HMPB-HC1 sub channel fixing system :
• Easy to assemble sub channel system.
• Easy to install with uncomplicated elements.
• Minimum projection size is 110 mm and maximum is 250 mm.
• Ideal for restoration of facades.
• Anchors are fixed to channels with hex bolts and hex nuts.
ATS sub channel fixing system :
• Adjustable and easy to use sub channel system.
• Fast and easy fixing of stone slabs.
• Minimum projection size is 160 mm and maximum projection size is 360 mm.
• Ideal for varying projection sizes and slab dimensions.
• Anchors are fixed to toothed channels with lock nuts and hex bolts.
HMPC-HC1H sub channel system :
• Adjustable sub channel system with horizontal channels.
• Quick adjustability at horizontal axis.
• Minimum projection size is 150 mm and maximum is 240 mm.
• Ideal for staggered patterned facades.
• Anchors are fixed to channels with lock nuts and hex bolts.
HCSP2ChannelSupport
HCRS2ChannelRestraint
HMPAU Channel
HZ02Z Anchor
HRS1RestraintAnchor
HCSP1Channel Support
HCRS1Channel Restraint
HMPBChannel
HZ02Z Anchor
ATS-AChannel Support
ATS-BChannel Restraint
HMPSToothed Channel
ATS-HASpecial Anchor
ATS-HZZ Anchor
HCSP1Channel Support
HCRS1Channel Restraint
HMPCC Channel
HMPCC Channel
HZ01Z Anchor
HMP Sub Channel Systems - Examples
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 44
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HMP Channel Systems - Special ApplicationHMP Channel Systems - Special Application Details
Channel sub frame is designed to accommodate the natural stone angular installation.
Channel system is supported onto concrete floor and ceiling forming a false wall for stone installation.
Customized panels with stone slabs supported onto channel sub frame.
Stone installation around structural steel column. Channels are used to form a sub frame for fixing with adjustable anchors.
Sub frame is formed to accommodate the facade movement. Channels provi- de the means of easy and fast installation.
| 48Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 45
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HMP-ALU Aluminium Sub Channel SystemsHMP-ALU Aluminium Sub Channel Systems - Introduction
| 50Your Fixing Systems Specialist
HMP-ALU-AG Aluminium sub channel system
with vertical and horizontal aluminium channel grid
cement and stone panels
mm
undercut bolts and special brackets that are set on the vertical channels using the hang on method
HMP-ALU-AG/K Aluminium sub channel system
with vertical and horizontal aluminium channel grid
on the edge
mm
the horizontal aluminium channels with hang on method
HCSP5Channelsupport
HCRS5Channelrestraint
ALU-BXAluminiumchannel
ALU-RLAluminium channel
HCSP-6Channel Support
HCSP-6Channel Restraint
ALU-RLChannel
HZ-SPZ Anchor
HCS-AChannel Support
ALU-TT Vertical Channel
ALU-VHorizontal Channel
ALU-AGSpecialBracket
HC-SFChannel Support
HCRS1Channel Restraint
HMPCC Channel
HM-AG-KSpecial Bracket
HMP-ALU-SP/H Aluminium sub channel system
system with horizontal channels
horizontal axis
mm
channels with lock nuts and hex bolts
HMP-ALU-SP Aluminium sub channel system
channel system with special slotted aluminium channels
HZ00 Z Anchor
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 46
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
6. Accessories - Product Details
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 47
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Accessories - Pins, Plates, Shims & MoreHAZ Accessories - Product Details
Reveal
M (mm)
ProductCode
Technical Detail
HAA-8/50HAA-8/60HAA-8/70HAA-10/50HAA-10/60HAA-10/70HAA-10/80HAA-12/50HAA-12/60HAA-12/70HAA-12/80HAA-14/50HAA-14/60HAA-14/70HAA-14/80HAA-16/50HAA-16/60HAA-16/70HAA-16/80
88810101010121212121414141416161616
50607050607080506070805060708050607080
A+6A+6A+6A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8A+8
333
3.53.53.53.54.54.54.54.55.55.55.55.56666
4445555555566666666
2025304050
12-1314-1616-1722-2426-29
T
A
¯
L
AF
HAA Adjustable Arm
Type B : With welded pin Type C : With welded plate Type D : With welded plate & pins Type E : With welded shim
ProductCode
Technical Details
Diameter
¿ (mm)
HFP Flanged Pin
LengthFlange
Diameter
L (mm) F¿ (mm)
HFP-4/50HFP-5/60HFP-5/70HFP-6/70
4556
50607070
5667
ProductCode
Technical Details
Thick-ness
T (mm)
HSW Serrated Washer
HSW-22307HSW-22309HSW-263411HSW-263413
2.52.533
Height Width Length
H (mm) W (mm) L (mm)
22222626
30303434
791113
¿¿¿¿
ProductCode
Technical Details
Diameter
¿ (mm)
HTP Traced Pin
LengthTraceHeight
L (mm)
HTP-5/70HTP-6/75
56
7075
5.26.2
ProductCode
Technical Details
Thick-ness
T (mm)
HPW Plain Washer
HPW-22307HPW-22309HPW-263411HPW-263413
2.52.533
Height Width Length
H (mm) W (mm) L (mm)
22222626
30303434
791113
¿¿¿¿
TH (mm)
ProductCode
Technical Details
Diameter
¿ (mm)
HSP Straight Pin
Length
L (mm)
HSP-4/60HSP-5/60HSP-5/70HSP-6/70
4556
60607070
ProductCode
Technical Details
Thick-ness
T (mm)
HMLN Lock Nut
HMLN-6HMLN-8HMLN-10HMLN-12
689
10
Height Width MetricHole
H (mm) W (mm) M (mm)
20202020
34343434
M6M8M10M12
ProductCode
Technical Details
Diameter
¿ (mm)
HUP U Shaped Pin
Height Width
L (mm)
HUP-4/50HUP-5/50HUP-6/50
456
202530
505050
ProductCode
Technical Details
Thick-ness
T (mm)
HSM Shim Plate
HSM-4030-7HSM-4030-9HSM-4050-11HSM-4050-13
2234
Height Width SlotHole
H (mm) W (mm) ¿ x SL
40404040
30305050
7x209x25
11x2513x30
W (mm)
HCP Capped Pin
ProductCode
Technical Details
Diameter
¿ (mm)
CapDiameter Length
¿ C (mm) L (mm)
HCP-4/35HCP-5/40HCP-6/45
456
678
354045
HPT Plastic Tube
ProductCode
Technical Details
InnerDiameter
In. ¿ (mm)
OuterDiameter Length
Ou. ¿ (mm) L (mm)
HPT-4HPT-5HPT-6
4.55.56.5
678
304040
Metric Size LengthFlat length
SizeFlatteningThickness
PinDiameter
StoneThickness
Distancebetween
Edge & Hole
L (mm) AF (mm) T (mm) ¿ (mm) St (mm) A (mm)
• Material : Stainless Steel 1.4301 (A2) & 1.4401 (A4). Material for Plastic Tube: Polyacetal.
| 54Your Fixing Systems Specialist
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 48
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HB Expansion Bolts
55
HB Expansion Bolts - Product Details
HB01 - 6 / 80
LengthDiameterType
HB01 Sleeve Bolt
ApplicationFor fastening fixtures to concrete strength class C20/25 & solid concrete block walls.
Available inStainless Steel EN 1.4301 & 1.4401 (AISI 304 & AISI 316) and E.galvanized Mild Steel.
Product Code Example ProductCode
Technical Details
Bolt Size
(mm)
HB01-6/80HB01-8/80HB01-10/80HB01-12/100
M6X80M8X80M10X80M12X100
ø8x68ø10x68ø12x68ø16x88
8101216
55555575
45454565
10101012
9111317
7153045
808080
100
1.301.802.202.70
2.404.004.806.10
2.203.004.104.60
3.305.207.808.60
SleeveSize
(mm)
Drill HoleDia.
D (mm)
DrillLength
HT (mm)
Min.Embed-
ment
Max.Fixture
Thickness
FixtureHole Dia.
MaxTorque
BoltLength
E min. (mm) Smax (mm) D1 (mm) Mdmax(Nm) L (mm)
Working Resistance (kN)ConcreteBlockwork
Wall
C 20/25Concrete
WallPullout S hear Pullout Shear
HB03 - 8 / 80
LengthDiameterType
HB03 Through Bolt
ApplicationFor fastening fixtures to concrete strength class C20/25 & solid concrete block walls.
Available inStainless Steel EN 1.4301 & 1.4401 (AISI 304 & AISI 316) and E.galvanized mild steel.
Product Code Example
HB05 - 6 / 80
LengthDiameterType
HB05 Shell Bolt
ApplicationFor fastening fixtures to concrete strength class C20/25 & solid concrete block walls.
Available inStainless steel EN 1.4301 & 1.4401 (AISI 304 & AISI 316)
Product Code ExampleProductCode
Technical Details
Bolt Size
(mm)
HB05-6/80HB05-8/80HB05-10/100
M6X80M8X80
M10X100
ø8X48ø10X56ø12X68
101214
556070
485668
302130
79
11
71525
8080
100
3.504.105.20
3.306.70
11.00
4.506.509.50
3.306.70
11.00
ShellSize
(mm)
Drill HoleDia.
D (mm)
DrillLength
HT (mm)
Min.Embed-
ment
Max.Fixture
Thickness
FixtureHole Dia.
MaxTorque
BoltLength
E min. (mm) Smax (mm) D1 (mm) Mdmax(Nm) L (mm)
Working Resistance (kN)ConcreteBlockwork
Wall
C 20/25Concrete
WallPullout S hear Pullout Shear
ProductCode
Technical Details
Bolt Size
(mm)
HB03-8/80HB03-8/100HB03-8/120HB03-10/90HB03-10/110HB03-10/130HB03-12/110HB03-12/125HB03-12/145
M8X80M8X100M8X120M10X90M10X110M10X130M12X110M12X125M12X145
888101010121212
656565707070959595
555555656565808080
183858153555123252
999
111111131313
131313252525404040
8010012090
110130110125145
4.11
6.47
9.64
6.50
9.70
12.40
Drill HoleDia.
D (mm)
DrillLength
HT (mm)
Min.Embed-
ment
Max.Fixture
Thickness
FixtureHole Dia.
MaxTorque
BoltLength
E min. (mm) Smax (mm) D1 (mm) Mdmax(Nm) L (mm)
Working Resistance (kN)C 20/25 Concrete
Wall
Pullout Shear
254565254565254565
ThreadLength
LG (mm)
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 49
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
HB Expansion BoltsHB Expansion Bolts - Product Details
HB06 - 6
M. SizeType
HB06 Drop in Bolt
ApplicationFor fastening fixtures to concrete walls.
Available inStainless Steel EN 1.4301 & 1.4401 (AISI 304 & AISI 316) and E.galvanized mild steel.
Product Code Example ProductCode
Technical Details
Bolt Size
(mm)
HB06-6HB06-8HB06-10HB06-12
M6X20M8X30M10X30M12X35
ø8x30ø10x40ø12x40ø14x50
8101215
32434354
30404050
10101214
79
1113
48
1535
8/1110/1312/1614/22
1.301.802.202.70
2.404.002.806.10
2.003.204.356.00
1.783.303.906.80
ShellSize
(mm)
Drill HoleDia.
D (mm)
DrillLength
HT (mm)
Min.Embed-
ment
Max.Fixture
Thickness
FixtureHole Dia.
MaxTorque
Screw inDepth
Min/MaxE min. (mm) Smax (mm) D1 (mm) Mdmax(Nm) Sd (mm)
Working Resistance (kN)C 20/25Concrete
Wall
C 20/30Concrete
WallPullout Shear Pullout Shear
HB03 - 8 / 80
LengthDiameterType
HB07 Anchor Stud
ApplicationFor fastening fixtures to concrete walls.
Available inStainless Steel EN 1.4301 & 1.4401 (AISI 304 & AISI 316) and E.galvanized Mild Steel.
Product Code Example
HB05 - 24 / 30
LengthSizeType
HB09 HAZ Super
ApplicationFor fastening fixtures to natural stoneAvailable inStainless Steel EN 1.4301 & 1.4401 (AISI 304 & AISI 316)Advantages• No use of special and expensive drilling tools.• No need for expensive drill bits.• No stone breakage during fixation of bolt. Product Code Example
ProductCode
Technical Details
Bolt Size
(mm)
HB07-8/110HB07-10/130HB07-12/160
M8X110M10X130M12X160
101214
8292
115
8090
110
142128
91115
102030
110130160
0.700.750.80
0.700.750.80
6.339.95
13.92
4.257.17
10.00
Drill HoleDia.
D (mm)
DrillLength
HT (mm)
Min.Embed-
ment
Max.Fixture
Thickness
FixtureHole Dia.
MaxTorque
BoltLength
E min. (mm) Smax (mm) D1 (mm) Mdmax(Nm) L (mm)
Working Resistance (kN)Hollow
MasonryWall
C 20/30Concrete
Wall
ProductCode
Technical Details
BoltSize
(mm)
HB09-24/30HB09-48/45HB09-72/60
M8X30M8X45M8X60
121212
122232
122232
555
999
131313
304560
1.40 3.00 1.00 2.10
Drill HoleDia.
D (mm)
DrillLength
HT (mm)
Min.Embed-
ment
Max.Fixture
Thickness
FixtureHole Dia.
MaxTorque
BoltLength
E min. (mm) Smax (mm) D1 (mm) Mdmax(Nm) L (mm)
Working Resistance (kN)Hard
GraniteSoft
Marble
203040
StoneThickness
St (mm)
182328
ThreadLength
(mm)
| 56Your Fixing Systems Specialist
Pullout Shear Pullout Shear
Pullout Shear Pullout Shear
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 50
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
7. Appendix 1 - Design Principles
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 51
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Design Principles
RedLeafStoneAnchorscanprovidetheserviceofdesignandengineeringforstoneanchors.Designisperformedinhouse,whereby,engineeringis performed by accredited Structural Engineers for the applicable jurisdictions in which the project is located. Our designers and 3rd partycontractedEngineer’swillassesstheprojectfromtheperspectiveofeconomyandlocaldesignstandardsandBuildingCodes.RegionswillvarywithregardstotheoreticaldesignconsiderationsforSeismicandWindloading,aswellasbearingloadsfortheapplicablestones.
3rdPartyEngineerswill implementdesigncriteria toFiniteElementAnalysisorLimitStatesDesign–whichever is required for jurisdictionalconformance.
DependingontheArchitecturalDesign,customdesignsmayhavetobedevelopedanddiscussedwithallstake-holders.Asanalternative,theCustomermayhavecompletecontrolofthedesignprocess,andsimplyprovidedesigntoRedLeafStoneAnchors.Wearehappytoreviewformanufactur-abilityandthenproceedaspercriteria.
LocalTestingagenciescanbeforwardedanchorsfortestingtomeetanylevelofprojectspecification.
Referencewillbemadetothefollowingstandards:
American Standards:•ASTMC1242-12............................................................................Standardguideforstoneattachmentsystems•ASTMA276...................................................................................Specificationforstainlesssteelbarsandshapes•ASTM666......................................................................................Specificationforannealedorcoldworkedausteniticstainlesssteelsheets•ACSE.............................................................................................Minimumdesignloadsforbuildings
Canadian Standards:•CAN-CSAA307-04........................................................................ConnectorsforMasonry•CAN-CSAS304.1-04.....................................................................DesignofMasonryStructures•CAN-CSA-S16-01..........................................................................MechanicalBolts•CAN-CSA-S16-01andCSAStandardA23.3................................CastinPlaceAnchorBolts•CSA-O86........................................................................................EngineeringDesigninWood(NamelyforLagBoltDesignintoWoodFramingMembers)
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 52
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Design Principles
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 53
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Design Principles
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 54
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
8. Appendix 2 - Test Certificates
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 55
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Test Certifi cates
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 56
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Test Certifi cates
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 57
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Test Certifi cates
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 58
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Test Certifi cates
1.877.522.1688 • [email protected] • www.redleafstoneanchors.com 59
Stone AnchorsRed Leaf
STONE ANCHORS CATALOG
Test Certifi cates
VANCOUVER (Head Office)108 – 8410 Ontario St.Vancouver, BC, V5X 4S6Canada
© 2014 Red Leaf Stone Anchors - All rights reserved
Red Leaf Stone Anchors
Toll free: 1.877.522.1688 • [email protected] • www.redleafstoneanchors.com