247

REFERENCES

1. ACI Committee 211.4R-93, �Guide for selecting proportions for High

Strength concrete with Portland Cement and fly ash�, ACI manual ofconcrete practice, 1996.

2. ACI Committee 363, �State-of-the-Art Report on High StrengthConcrete�, ACI Manual of Concrete Practice, 1997.

3. Ahmed Tafraoui, Gilles Escadeillas, Soltane Lebaili and Thierry Vidal,

�Metakaolin in the formulation of UHPC�, Construction and Building

Materials, Vol.23, pp.669-674, 2009.

4. Aitcin, P.C. �High Performance Concrete�, E & FN spon, London,pp.1- 591, 1998.

5. Aitcin, P.C. and Laplante, P. �Long-term compressive strength of silica

fume concrete�, Journal of Materials in Civil Engineering, Vol. 2,No. 3, pp.164-170,1990.

6. Amit Mittal and Kamath, R. R. �Properties of HPC for PC Dome of

NPP, Kaiga�, The Indian Concrete Journal, Vol. 73, No. 9,pp.561 � 568, 1999.

7. Andriolo, F. R. and Sgaraboza, B. C. �The use of pozzolan from

calcined clays in preventing excessive expansion due to alkali-silica

reaction in some Brazilian dams�, Proceedings of 7th

International

conference on AAR, Ottawa, 1986.

8. Arunachalam, K. and Sabapathi, P. �Experimental Investigation on the

behaviour of confined high strength concrete square columns�,

Proceedings of the National Conference on Recent Developments in

materials and Structures (REDEMAT -2004), NIT Calicut, pp.47-53,

2004.

9. ASTM C-642, �Standard Test Method for Specific Gravity, Absorption

and voids in Hardened Concrete�, Annual Book of American Societyfor Testing Material Standards, 1997.

248

10. Azadeh Parvin and Aditya S.Jamwal, �Performance of Externally FRP

reinforced columns for changes in angle and thickness of the warp andconcrete strength�, Composite Structures, Vol.73, pp.451-457, 2005.

11. Balamuralikrishna, R. and Antony Jeyasehar, C. �Flexural Behavior of

RC Beams Strengthened with Carbon Fibre Reinforced Polymer

(CFRP) Fabrics�, The Open Civil Engineering Journal, Vol.3,pp.102-109, 2009.

12. Bayasi, Z. and Zhou, J. �Properties of silica fume concrete andmortar�, ACI Material Journal, Vol.90, No.4, pp.349-356, 1993.

13. Ben young and Jintang Yan, �Finite element analysis and design of

fixed ended plain channel columns�, Finite elements in Analysis andDesign, Vol.38, pp.549-566, 2002.

14. Bentur, A. and Jaegermann, G. �Effect of curing and composition of

the outer skin of concrete�, Materials in Civil Engineering, Vol.3,No.4, pp.252-262, 1991.

15. Bentz, D. P. and Garboczi, E. J. �Simulation studies on the effect of

mineral admixture on the cement paste � aggregate interfacial zone�,ACI Materials Journal, Vol. 88, No. 5, pp.518-528, 1991.

16. Bharatkumar, B. H., Narayanan, R., Raghuprasad, B. K. and

Ramachandramurthy, D. S. �Mix proportioning of high performance

concrete�, Cement and Concrete Research, Vol.23, pp.71-80, 2001.

17. BIS: 12269 - 1987, �Specification for 53 Grade Ordinary Portland

Cement�, Bureau of Indian Standards, New Delhi, India.

18. BIS: 2386 (Part 3)-1963, �Methods of test for aggregates for concrete:

specific gravity, density, voids, absorption and organic impurities�,Bureau of Indian Standards, New Delhi, India.

19. BIS: 2386 (Part 4) -1963, �Methods of Test for Aggregates for

Concrete: Mechanical Properties�, Bureau of Indian Standards, NewDelhi, India.

20. BIS: 3085 - 1965, �Method of Test for Permeability of Cement Mortarand Concrete�, Bureau of Indian Standards, New Delhi, India.

21. BIS: 4031-1988, �Method of physical test for hydraulic cement�,Bureau of Indian Standards, New Delhi, India.

249

22. BIS: 4032-1985, �Method of chemical analysis of hydraulic cement�,Bureau of Indian Standards, New Delhi, India.

23. BIS: 456 - 2000, �Plain and Reinforced Concrete�, Bureau of IndianStandards, New Delhi, India.

24. BIS: 516-1959, �Methods of tests for strength of concrete�, Bureau of

Indian Standards, New Delhi, India.

25. BIS: 5816-1999, �Method of test for splitting tensile strength ofconcrete�, Bureau of Indian Standards, New Delhi, India.

26. Burg, R. G. and Ost, B. W. �Engineering properties of commercially

available high strength concretes�, Research and Development

Bulletin, No RD 104.01T, Portland Cement Association, Sokkie, IL,

pp.174 - 178 ,1992.

27. Cahit Bilim, Cengiz, D. Atis, Harun Tanyildizi and Okan Karahan,

�Predicting the compressive strength of ground granulated blast

furnace slag concrete using artificial neural network�, Journal ofAdvances in Engineering Software, Vol.40, pp. 334�340, 2009.

28. Carrasquillo, R. L., Nilson, A. H., and Slate, F. O. �Properties of High

Strength Concretes Subjected to Short-Term loads�, ACI MaterialJournal, Vol. 78, No. 3, pp. 171-178, 1981.

29. Chien-Hung Lin, Shih-Ping Lin, and Chih-Han Tseng, �High

workability concrete columns under concentric compression�, ACIStructural Journal, Vol. 101, No.1, pp. 85-93, 2004.

30. Cladera, A. and Mari, A. R. �Shear design procedure for reinforced

normal and high-strength concrete beams using artificial neural

networks�, Journal of Engineering Structures, Vol. 26, pp. 927-936,2004.

31. Cohen, M. D. �A look at silica fume and its actions in portland cement

concrete�, Indian Concrete Journal, pp. 429-438, 1990.

32. Colomb, F., Tobbi, H., Ferrier, E., Hamelin, P. �Seismic retrofit of

reinforced concrete short columns by CFRP materials�. CompositeStructures, Vol. 82, No.4, pp. 475-87, 2008.

250

33. Cong, S. and Darwin, S. L. �Role of silica fume in compressive

strength of cement paste, mortar and concrete�, ACI Materials Journal,

Vol. 89, No. 4, pp. 375-387, 1992.

34. Dias, W. P. S. and Pooliyadda, S. P. �Neural networks for predicting

properties of concretes with admixtures�, Construction and Building

Materials, Vol. 15, pp. 371-9, 2001.

35. During, T. A. and Hicks, M. C. �Using micro silica to increase

concrete�s resistance to aggressive chemicals�, Concrete International,

Vol.14, No. 3, pp. 42-48, 1991.

36. Duval, R. and Kadir, E. H. �Influence of silica fume on the

Workability and Compressive Strength of High-Performance

Concretes�, Cement and Concrete Research, Vol. 28, No. 4,

pp. 533-547, 1998.

37. Edward, F. O� Neil and Charles, A. Weiss, �Strength and Durability of

Low Cost High Performance Concrete�, Concrete Information

Bulletin, pp. 1-13, 2001.

38. Elyasian, I., Abdoli, N. and Ronagh, �Evaluation of parameters

effective in FRP shear strengthening of RC beams using FE method�,

Asian Journal of Civil Engineering (Building and Housing), Vol. 7,

No.3, pp. 249-257, 2006.

39. Emre Sancak, �Prediction of bond strength of lightweight concretes by

using artificial neural networks�, Scientific Research and Essay,

Vol. 4, No. 4, pp. 256-266, 2009.

40. Feldman, R. F. and Cheng�yi, �Influence of silica fume on the micro

structural development in cement mortars�, Cement and Concrete

Research, Vol. 32, pp. 1699-1704, 1985.

41. Francois De Larrard and Thierry Sedran, �Mix proportioning of high

performance concrete�, Cement and Concrete Research, Vol. 32,

pp. 1699-1704, 2002.

42. Galal, K., Arafa, A. and Ghobarah, A. �Retrofit of RC square short

columns�, Journal of Engineering Structures, Vol.27, pp. 801-813,

2005.

43. Ganesan, N. and Sekar, T. �Mechanical Properties of Super-Plasticized

Micro- silica modified High Strength Concrete�, The Institution of

Engineers (India) Journal, Oct-Dec, pp. 37-41, 2003.

251

44. Ganesh Babu, K. and Surya Prakash, P. V. �Efficiency of silica fume

in concrete�, Cement and Concrete Research, Vol. 25, No. 6,pp. 1273-1283, 1995.

45. Gengying Li, Xiaohua Zhao, Peiming Wang and Xianping Liu,

�Behaviour of concrete-filled steel tubular columns incorporating flyash�, Cement and Concrete Composites, Vol. 28, pp. 189-196, 2006.

46. Glory Joseph and Ramamurthy, K. �Influence of fly ash on strength

and sorption characteristics of cold-bonded fly ash aggregate

concrete�, Construction and Building Materials, Vol. 23,

pp. 1862-1870, 2009.

47. Goldman, A. and Bentur, A. �The Influence of microfillers on

Enhancement of Concrete Strength�, Cement and Concrete Research,Vol. 23, No. 4, pp. 962-972, 1993.

48. Gopalakrishnan, S. Rajamane, N. P., Neelamegam, M. Peter, J. A. and

Dattatreya, J. K. �Effect of Partial Replacement of Cement with fly

ash on the Strength and Durability of HPC�, Indian Concrete Journal,Vol. 75, No. 5, pp. 335-341, 2001.

49. Hadi, M. N. S. �Behaviour of FRP strengthened concrete columns

under eccentric compression loading�, Composite Structures, Vol. 77,

pp. 92-96, 2005.

50. Hadi, M. N. S. �Behaviour of eccentric loading of FRP confined fibre

steel reinforced concrete columns� Construction and BuildingMaterials, Vol.23, pp. 1102-1108, 2007.

51. Hadi, M. N. S. �Retrofitting of shear failed reinforced concretebeams�, Composite Structures, Vol. 62, pp. 1�6, 2003.

52. Haque, M. N. and Kayal, O. �Properties of high strength concrete

using a fine fly ash�, Cement and Concrete Research, Vol. 8,pp. 1445-1452, 1998.

53. Haroun, M. A., Mosallam, A. S., Feng, M. Q. and Elsanadedy, H. M.

�Composite jackets for the seismic retrofit and repair of bridge

columns�, In: Seventh US National Conference on Earthquake

Engineering, pp. 10, 2002.

54. Hassan, K. E., Cabrera, J. G. and Head, M. K. �The influence of

aggregate characteristics on the properties of high performance, high

strength concrete�, In: Rangan B, Patnaik A, editors. Proceedings of

the International Conference, Perth, Australia, pp. 441-55, 1998.

252

55. Havdal, J. and Justnes, H. �The alkalinity of cementitious paste with

micro silica cured at ambient and elevated temperatures�, Nordic

Concrete Research Publications, No. 12, pp. 42 -56, 1993.

56. Hooton, R. D. �Influence of silica fume replacement of cement on

physical properties and resistance to sulfate attack, freezing and

thawing, and alkali-silica reactivity�, ACI Materials Journal, Vol. 90,

No. 2, pp. 143-151, 1993.

57. Hossam, A. Toutanji and Tahar el-Korchi, �The influence of silica

fume on the compressive strength of cement paste and mortar�,

Cement and Concrete Research, Vol. 25, No. 7, pp. 1591-1602, 1995.

58. Hwang, K., Noguchi, T. and Tomosawa, F. �Prediction model of

compressive strength development of fly-ash concrete�, Cement

Concrete Research, Vol. 34, pp. 269�76, 2004.

59. Iravani, S. �Mechanical properties of High-Performance Concrete�,

ACI Materials Journal, Vol. 93, No. 5, pp. 416-425, 1996.

60. Jatren, P. �Use of silica fume in concrete�, Proceedings,

CANMET/ACI First International Conference on the use of fly ash,

silica fume, slag and other mineral by-Products in concrete,

Montebello, ed. Malhotra V. M., SP-79, American Concrete Institute,

Detroit, Vol. 2, pp. 625-642, 1983.

61. Joshi, N. G. �Bandra-orli sea Link: Evolution of HPC mixes containing

silica fume�, The Indian Concrete Journal, Vol. 75, pp. 627-633, 2001.

62. Katayama, K. and Kabayasi, S. �Study on concrete surface micro

cracks when using permeable forms�, Transactions of JSC, Vol. 156,

No. 433, pp. 161-177, 1991.

63. Kaveh, A. and Khaleghi, A. �Prediction of strength of concrete

specimens using Artificial Neural Networks�, Asian Journal of Civil

Engineering (Building and Housing), Vol. 1, No. 2, pp. 1-12, 2000.

64. Khan, M. I. and Lyssdale, C. J. �Strength, Permeability and

Carbonation of High Performance Concrete�, Cement and Concrete

Research, Vol. 32, pp. 123-131, 2002.

65. Khathib, J. M. �Metakaolin concrete at a low water to binder ratio�,Construction and Building Materials, Vol. 22, pp. 1691- 1700, 2008.

66. Khatib, J. M. and Wild, S. �Sulfate resistance of metakaolin mortar�,Cement Concrete Research, Vol. 28, No. 1, pp. 120-132, 1998.

253

67. Kreijger, P. C. �The skins of concrete-research needs�, Magazine ofConcrete Research, Vol. 140, No. 3, pp. 122-123, 1987.

68. Kumutha, R. Vaidyanathan, R. and Palanichamy, M.S. �Behaviour of

reinforced concrete rectangular columns strengthened using GFRP�,

Cement and Concrete Composites, Vol.29, pp. 609-615, 2007.

69. Lai, S. and Sera, M. �Concrete strength prediction by means of neural

network�, Construction and Building Materials, Vol. 11, No. 2,pp. 93-98, 1997.

70. Larbi, J. A. and Bijen, J. M. �Orientation of calcium hydroxide at the

portland cement paste aggregate interface in mortars in the presence of

silica fume: A contribution�, Cement and Concrete Research, Vol. 20,No. 3, pp. 461-470, 1990.

71. Lee, S. C. �Prediction of concrete strength using Artificial NeuralNetworks�, Engineering Structures, Vol. 25, pp. 849-857, 2003.

72. Lehtonen, V. �The influence of pozzolanic admixtures on the frost

resistance of hardened concrete�, Dansk Betonforening, Copenhagen,

Denmark, Vol. 85, No. 22, pp. 217-230, 1985.

73. Luther, M. and Hansen, W. �Comparison of creep and shrinkage of

high strength silica fume concrete with fly ash concretes of similar

strengths�, Proceedings, CANMET/ACI third International conference

on the use of fly ash, silica fume, slag and natural pozzolans in

concrete, Trondheim, ed. Malhotra V.M., SP-114, American ConcreteInstitute, Detroit, Vol. 1, pp. 573-591, 1989.

74. Maage, M. �Condensed silica fume in concrete made with blended

cements�, Proceedings of the CANMET International workshop on

condense silica fume in concrete, Montreal, Canada, 1987.

75. Mak, S. L. and Torii, K. �Strength development of high strength

concrete with and without silica fume under the influence of high

hydration temperatures�, Cement and Concrete Research, Vol. 25,No. 98, pp. 1791-1802, 1995.

76. Malathy, R. and Subramanian, K. �Role of mineral admixtures on the

corrosion behavior of reinforcement in high performance concrete�,

Proceedings of the National Seminar on Futuristic in Concrete andConstruction Engineering, Chennai, pp. 5.17-5.24, 2003.

77. Mc Donald and James, E. �Properties of silica fume concrete�, REMR

Research Programme, Technical Report REMR-CS-32, U.S. Army

Engineer Waterways Experiment Station, Vicksburg, pp.791-802,1991.

254

78. Mehmet Inel, �Modelling of ultimate deformation capacity of RC

columns using artificial neural networks�, Engineering Structures,Vol. 29, pp. 329-335, 2007.

79. Mehta, P. K. and Aitcin, P. C. �Principles underlying production of

high performance concrete�, Cement and Aggregates Research,Vol. 12, No. 20, pp. 70-78, 1990.

80. Meier, U. and Kaiser, H. P. �Strengthening of structures with CFRP

laminates�, Proceedings on Advanced Composite Materials in CivilEngineering Structures, MT. Div./ASCE/Las Vegas, pp. 224-32, 1991.

81. Mostafa Erfani and Ehsan Noroozinejad Farsangi, �Fuzzy Neural

Network Utilization in Prediction of Compressive Strength of Slag-

Cement Based Mortars�, Australian Journal of Basic and AppliedSciences, Vol. 4, No. 10, pp. 4962-4970, 2010.

82. Mustafa Saridemir, �Prediction of compressive strength of concretes

containing metakaolin and silica fume by artificial neural networks�,

Advances in Engineering software, Vol. 40, pp. 350�355, 2009.

83. Nakin Suksawang, Hani, H. Nassif and Padit Tanchan, �Comparison

of Elastic Modulus Equations for High Performance Concrete (HPC)

with Pozzolanic Materials�, International Conference on Pozzolan,

Concrete and Geopolymer, Thailand, pp. 237-246, 2006.

84. Natesan, S. C., Venkatesh Babu, D. L. and Ananda Kumar, S. �Study

on High Performance Concrete-partial replacement of Cement by

pulverized fuel Ash and Condensed silica fume�, Asian Conference onEcstasy in Concrete, No. 20, pp. 327-334, 2000.

85. Natesan, S. C. �Durability of High Performance Concrete�,

Proceedings of the International Conference on Recent Trends in

Concrete Technology and Structures, Kumaraguru College ofTechnology, Coimbatore, India, pp. 439 - 498, 2003.

86. Neville, A. and Aitcin, P. C. �High performance concrete - Anoverview�, Materials and Structures, Vol. 31, pp. 111-7, 1998.

87. Ohja, R. N. and Nasser, K. W. �Use of fly ash and condensed silica

fumes in making concrete�, Journal of the Institution of Engineers(India), Vol. 77, pp. 170-173, 1996.

255

88. Page, C. L., and Vennesland, D. �Pore solution composition and

chloride binding capacity of silica fume cement paste�, Materials andStructures, Vol. 16, No. 91, pp. 19-25, 1983.

89. Paloma, A. and Glasses, F. P. �Chemically bonded cementitious

materials based on metakaolin, Br, Ceram-Trans, 1992, Vol. 91,

pp. 107-112, 1992.

90. Parande, A. K., Babu, B. R., Karthik, M. A., Deepak Kumar, K. K.

and Palaniswamy. N. �Study on strength and corrosion performance

for steel embedded in metakaolin blended concrete/mortar�,

Construction and Building Materials, Vol. 22, No. 3, pp. 127�34, 2008.

91. Parichatprecha, R. and Nimityongskul, P. �Analysis of durability of

high performance concrete using articial neural networks�,

Construction and Building Materials, Vol. 23, pp. 910-917, 2009.

92. Parrot, L. J. �Water absorption in cover concrete�, Materials and

Structures, Vol. 25, No. 149, pp. 284-292.

93. Pinto, R. C. A. and Haver, K. C. �Combined effects of silica fume,

superplasticizer and temperature on setting behavior�, Magazine ofConcrete Research, Vol. 52, No. 5, pp. 345-352, 2000.

94. Poon, C. S., Lam, L., Kou, S. C., Wong, Y. L. and Wong, R. �Rate of

pozzolanic reaction of metakaolin in high performance cement paste�,Cement and Concrete Research, Vol. 31 pp. 1301�1306, 2001.

95. Poon, C. S., Kou, S. C. and Lam, L. �Compressive strength, chloride

diffusivity and pore structure of high performance metakaolin and

silica fume concrete�, Construction and Building Materials, Vol. 20,

No. 10, pp. 858�65, 2006.

96. Promis, G. Ferrier, E. and Hamelin, P. �Effect of external FRP

retrofitting on reinforced concrete short columns for seismicstrengthening�, Composite Structures, Vol. 14, pp. 4-13, 2008.

97. Raghu Prasad, B. K., Hamid Eskandari and Venkatarama Reddy, B. V.

�Prediction of compressive strength of SCC and HPC with high

volume y ash using ANN�, Construction and Building Materials,

Vol. 23, pp. 117�128, 2009.

256

98. Rajamohan, S. and Sundarraja, M. C. �Strengthening of compression

members with externally bonded composite fabrics- An experimental

study�, Journal of Institution of Engineers (India), Vol.87, pp. 43-51,

2007.

99. Ramakrishnan, V. and Srinivasan, V. �Performance characteristics of

fibre reinforced condensed silica fume concrete�, Proceedings,

CANMET/ACI First International conference on the use of fly ash,

silica fume, slag and other mineral by-products in concrete,

Montebello, ed. Malhotra V. M., Sp-79, Vol. 2, American ConcreteInstitute, Detroit, pp. 797-812, 1983.

100. Ramlochan, T. and Thomas, M. D. A. �The effect of metakaolin on

external sulphate attack�, In: Malhotra V. M., Editor, Proceedings of

the fourth CANMET/ACI conference on durability of concrete,Detroit, MI, USA, American concrete Institute, pp. 178-186, 2000.

101. Ravindra, S. R. and Mattur C. Narasimhan, �Experimental Studies on

High Strength micro silica concrete�, The Indian Concrete Journal,July-Sep, pp. 19-22, 2003.

102. Revathi and Devdas Menon, �Nonlinear finite element analysis of

reinforced concrete beams�, Journal of Structural Engineering, Vol. 32,No. 2, pp. 135-137, 2005.

103. Riad Benzaid, Nasr-Eddine Chikh and Habib Mesbah, �Behaviour of

square concrete confined with GFRP composite warp�, Journal of CivilEngineering and Management, Vol. 14, No. 2, pp. 115-120, 2008.

104. Ritchie, P. A., David, A. T., Le-Wu, L. and Guy, M. C. �External

reinforcement of concrete beams using fibre reinforced plastics�, ACIStructural Journal, Vol. 88, No. 4, pp. 490-500, 1991.

105. Riyadh Al-Amery and Riyadh Al-Mahaidi, �Coupled flexural�shear

retrofitting of RC beams using CFRP straps�, Composite Structures,Vol. 75, pp. 457�464, 2006.

106. Rostam, S. and Schissel, P. �Next generation design concepts for

durability and performance of concrete Structures�, In Proceedings of

the 6th

International Conference on Durability of Building Materials

and Components, Omiya, Japan, E & FN spon, London, Vol. 2,

pp. 1403-1412, 1993.

257

107. Saadatmanesh, H. and Ehsani, M. R. �Reinforced concrete beams

strengthened with GFRP plates-An Experimental study�, ASCE

Journal of Structural Engineering, Vol. 117, No. 11, pp. 3417-33,

1991.

108. Saafan, M. A. A. �Shear Strengthening of Reinforced Concrete Beams

Using GFRP Wraps�, Acta Polytechnica, Vol. 46, No. 1, pp. 24-32,2006.

109. Sabir, B. B. �High strength condensed silica fume concrete�, Magazineof Concrete Research, Vol. 27, No. 1172, pp. 1219-1226, 1995.

110. Said Iravani, �Mechanical Properties of High Performance Concrete�,

ACI Materials Journal, Vol.93, No. 5, pp. 416-425, 1996.

111. Santanu Bhanja and Bratish Sengupta, �Investigation on the

compressive strength of condensed silica fume concrete using

statistical methods�, Cement and Concrete Research, Vol.32,pp. 1391-1394, 2002.

112. Santhakumar, R., Dhanraj, R. and Chandrasekaran, E. �Behaviour of

retrofitted RC beams under combined bending and torsion: A

numerical study�, Electronic Journal of Structural Engineering, Vol. 7,pp. 17-21, 2007.

113. Scali, M. J., Chin, D. and Berke, N. S. �Effect of microsilica and fly

ash on the microstructure and permeability of concrete�,

Proceedings,9th

International conference on cement microscopy, Reno,

International Cement Microscopy Association, Duncanville, Texas,pp. 375-387, 1987.

114. Sedran, T., Larrard, F. D., Hurst, F. and Contaminus, C. �Mix Design

of SCC�, Proceedings of the International RILEM Conference, Paisly,Scotland, pp.439-450, 1996.

115. Sellevold, E. J. and Radjy, F. F. �Condensed silica fume in concrete:

Water demand and strength development�, Publications SP-79,American Concrete Institute, pp. 11, 677-694, 1983.

116. Selvaraj, R., Muralidharan, S., and Srinivasan, S. �The influence of

silica fume on the factors affecting the corrosion of reinforcement in

concrete � A review�, Journal of Structural Concrete, Vol. 4, No. 1,pp. 19-23, 2003.

258

117. Shannag, M. J. and Hussain, A. S. �Sulfate resistance of High

Performance Concrete�, Cement and Concrete Composites, Vol. 25,pp. 363-369, 2003.

118. Shreeti, S. Mavinkurve, Prabir, C. Basu, �High performance Concrete

using high reactivity metakaolin�, Indian Concrete Journal,pp. 1077-1085, 2003.

119. Sinan Caliskan, �Aggregate/mortar interface: Influence of silica fume

at the micro and macro level�, Cement and Concrete Composites,Vol. 25, pp. 557-564, 2003.

120. Subhajit Saraswati and Prabir, C. Basu, �Durability of High

Performance Concrete : An overview�, Proceedings of the

International Conference on Recent Trends in Concrete Technologyand Structures, Coimbatore, India, Vol. 1, pp. 13-29, 2003.

121. Tasdemir, C. �Effects of silica fume and aggregate size on the

brittleness of concrete�, Cement and Concrete Research, Vol. 26,

No. 1, pp. 63-68, 1996.

122. Teng, J. C. and Lam, L. �Compressive behaviour of carbon fibre

reinforced polymer confined concrete in elliptical columns�, Journal ofStructural Engineering, pp. 1535-43, 2002.

123. Toutanji, H. and Deng, Y. �Strength and ductility performance of

concrete axially loaded members confined with AFRP compositesheets�, Composite Structures�, Vol. 33, pp. 255-61, 2002.

124. Udhayakumar, V., Bharatkumar, B. M., Balasubramanian, K. and

Krishnamoorthy, T. S. �Application of neural networks for concretestrength prediction�, ICI Journal, Vol. 8, pp. 13-17, 2007.

125. Venkatesh Babu, D. L. and Krishnamoorthy, R. �Studies on Strength

and Durability Characteristics of High Performance silica fumeconcrete�, The Master Builder, July-Aug, pp. 73-75, 2005.

126. Venkatesh Babu, D. L. Natesan, S. C. and Selvarani, M.

�Establishment of Empirical Relationship between Process Parameters

and some properties of High Performance silica fume concrete�,

Proceedings of International Conference on Advance in Concrete andConstruction, pp. 755-764, 2004.

259

127. Vishnuram, B. G., Muthupriya, P. and Subramanian, K. �Repair of

damaged RC square column with Glass Fibre Reinforced Polymer

composites�, Journal of Institution of Engineers (India), Vol. 87,

pp.73-82, 2006.

128. Viviana, F. R. and Osar, R. B. �Mineral admixtures contribution to the

development of heat of hydration and strength�, Cement Concrete andAggregate, pp. 150-158, 2004.

129. Wild, S., Khatib, J. M. and Jones, A. �A relative strength, pozzolanic

activity and cement hydration in superplasticised metakaolin concrete,�

Cement Concrete Research, Vol. 26, No. 10, pp. 1537-44, 1996.

130. Wolsiefer, J. �Ultra high strength field placeable concrete with silica

fume admixture�, Concrete International: Design and Construction,

Vol. 6, No. 4, pp. 25-31, 1984.

131. Xiaoqian Qian and Zongijin Li, �The relationships between stress and

strain for high-performance concrete with metakaolin�, Cement and

Concrete Research, Vol. 31, pp.1607-1611, 2001.

132. Ye, L., Yue, Q., Zhao, S. and Li, Q. �Shear strength of reinforced

concrete columns strengthened with carbon fibre-reinforced plastic

sheet�, Journal of Structural Engineering, Vol. 128, No. 12,

pp. 1527-34, 2002.

133. Yogendran, V., Langan, B. W., Haque, M. N. and Ward, M. A. �Silica

fume in High-Strength Concrete�, ACI Materials Journal, Vol. 84,

No. 2, pp. 124-129, 1987.

134. Yousef, A. and Al-Salloum, �Influence of edge sharpness on the

strength of square concrete columns confined with FRP composite

laminates�, Journal of Composites, Vol. 38, pp. 640-650, 2007.

135. Yung-Chih Wang and Hsu, �Design recommendations for the

strengthening of reinforced concrete beams with externally bonded

composite plates�, Composite Structures, Vol. 88, pp. 323-332, 2009.

136. Yunxing, Isamu Matsui and Naiquan Feng, �Effect of compound

mineral powders on workability and rheological property of HPC�,Cement and Concrete Research, Vol. 32, pp.71-78, 2002.

260

137. Zhang, M. H. and Malhotra, V. M. �Characteristics of thermal

activated alumino-silicate pozzolanic material and its use in concrete�,

Proceedings of 2nd

CANMET/ACI International Symposium on

Advances in concrete Technology, 1995.

138. Zhang, M. H. and Malhotra, V. M. �HPCC Incorporating condensed

silica fume and rice husk ash concrete as a supplementary cementingmaterial�, ACI Material Journal, Vol. 93, No. 6, pp. 629-636, 1996.

139. Zohra Dahou, Z., Mehdi Sbartai, Arnaud Castel and Fouad Ghomari,

�Artificial neural network model for steel-concrete bond prediction�,

Journal of Engineering Structures, Vol. 31, pp. 1724-1733, 2009.