relay outputs or isolated inputs terminal board series ...tb-24p_… · cn3 ch0 ch2 ch4 ch6 ch8...
TRANSCRIPT
TB-24P/24R/16P8R DIN-24P/24R/24G
Relay Outputs or Isolated Inputs Terminal Board Series
User’s Guide
Recycled Paper
©Copyright 1995~2003 ADLINK TECHNOLOGY INC.
All Rights Reserved.
Manual Rev 2.6: May 29, 2003
Part NO: 50-14001-202
The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer.
In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic, or other means in any form without prior written permission of the manufacturer.
Trademarks
TB-24P, TB-24R, TB-16P8R, DIN-24P, DIN-24R, DIN-24G are registered trademark of ADLINK TECHNOLOGY INC., other product names mentioned herein are used for identification purposes only and may be trademarks and/or registered trademarks of their respective companies.
Getting Service from ADLINK Customer Satisfaction is the most important priority for ADLINK TECHNOLOGY INC. If you need any help or service, please contact us.
ADLINK Technology Inc. Web Site http://www.adlinktech.com Sales & Service [email protected] Technical NuDAQ + USBDAQ + PXI [email protected] Support Automation [email protected] NuIPC [email protected] NuPRO/EBC [email protected] TEL +886-2-82265877 FAX +886-2-82265717 Address 9F, No. 166, Jian Yi Road, Chungho City, Taipei, 235 Taiwan.
Please email or FAX us of your detailed information for a prompt, satisfactory and constant service.
Detailed Company Information Company/Organization
Contact Person
E-mail Address
Address
Country
TEL FAX
Web Site
Questions Product Model
Environment to Use
OS: Computer Brand: M/B: CPU: Chipset: BIOS: Video Card: Network Interface Card: Other:
Detail Description
Suggestions to ADLINK
Table of Contents • i
Table of Contents
Chapter 1 TB-24P.............................................................. 1 1.1 Introductions..............................................................................1 1.2 Specifications ............................................................................1 1.3 Descriptions ..............................................................................2
Chapter 2 TB-24R ............................................................. 6 2.1 Introduction ...............................................................................6 2.2 Specification..............................................................................7 2.3 Description ................................................................................8
Chapter 3 TB-16P8R....................................................... 12 3.1 Introduction .............................................................................12 3.2 Specification............................................................................13 3.3 Description ..............................................................................14
Chapter 4 DIN-24P .......................................................... 18 4.1 Introductions............................................................................18 4.2 Specifications ..........................................................................18 4.3 Descriptions ............................................................................19
Chapter 5 DIN-24R.......................................................... 24 5.1 Introduction .............................................................................24 5.2 Specification............................................................................25 5.3 Description ..............................................................................26
Chapter 6 DIN-24G.......................................................... 31 6.1 Introduction .............................................................................31 6.2 Specification............................................................................31 6.3 Description ..............................................................................32
Warranty Policy .............................................................. 34
ii • Table of Contents
How to Use This Guide
This manual is designed to help you use the TB-24P/24R/16P8R. The manual describes how to modify various settings on the TB-24P/24R/16P8R terminal board to meet your requirements.
• Chapter 1, "TB-24P : 24 Opto-isolated Digital Inputs
Terminal Board", gives an overview of the TB-24P's features, description, and specifications.
• •Chapter 2, "TB-24R : 24 Relay Outputs Terminal Board", gives an overview of the TB-24R's features, description, and specifications.
• •Chapter 3, "TB-16P8R : 16 Opto-isolated Digital Inputs & 8 Relay Outputs Terminal Board", gives an overview of the TB-16P8R features, description, and specification
• •Chapter 4, "DIN-24P: 24 Opto-isolated Digital Inputs Terminal Board", gives an overview of the DIN-24P's features, description, and specifications.
• •Chapter 5, "DIN-24R: 24 Relay Outputs Terminal Board", gives an overview of the DIN-24R's features, description, and specifications.
• •Chapter 6, "DIN-24G: Terminal Board with 24 module rack for connecting I/O modules, gives an overview of the DIN-24G features, description, and specification
•
TB-24P • 1
1
TB-24P 24 Opto-isolated Digital Inputs Terminal Board
1.1 Introductions
TB - 24P is an input extension board with 24 isolated photo couplers. CN1, CN2, CN3 and CN4 are terminal blocks to connect with external devices. CN5 is a 50 pins connector to connect with opto-22 compatible connector, such as ACL-7124, ACL-7122, PET-48DIO, PCI-7248, PCI-7296 etc. All input ports are with LED indicators.
1.2 Specifications Indication Display: 24 LEDs for input indication Input electrical characteristically
Logic input low voltage: <0.8 V DC Logic input high voltage: +5V DC to +24V DC Logic input high current: up to 40mA Logic "1": Voltage input high Logic "0": Voltage input low
Isolation voltage : 2500V DC
2 • TB-24P
1.3 Descriptions
TB-24P has 5 connectors and 24 LEDs. The following Figure shows their placement on TB-24P.
Outline of TB-24P
TB-24P has 24 LEDs to indicate input status, the LED mapping and logic definition are shown as the following table.
LED No. Indication Display Color of LED Channel
LED 0 PA0 GREEN CH0 | | | |
LED 7 PA7 GREEN CH7 LED8 PB0 YELLOW CH8
| | | | LED 15 PB7 YELLOW CH15 LED 16 PC0 RED CH16
| | | | LED 23 PC7 RED CH23
LED mapping table
Logic "1" LED " ON" Logic "0" LED "OFF"
Logic define
TB-24P • 3
Each input channel can connect with opto-22 compatible Digital I/O board, such as ACL-7122, PET-48DIO, PCI-7248/96 etc. directly or through photo coupler, and the upper of each photo coupler has a jumper to select.
The positioning of each setting jumper Each input port has two mini jumpers for setting.
4N35 1 3 5
2 4 6
ISO 11
JP 11
4 6
1 3 5
2
* Photo coupler is not used
* It is for “dry contact”
4 6
1 3 5
2
* Photo Coupler is used
* It is for voltage input
(Factory setting)
4 • TB-24P
The input circuit is shown as the following figure.
1 23 45 6
5V
4 7K
Each input channel has two terminal blocks. The pin definition of the terminal block is shown as the following tables.
CN1 CH12 CH14 CH16 CH18 CH20 CH22V +
V -
V +
V -
V +
V -
V +
V -
V +
V -
V +
V-
CN2 CH13 CH15 CH17 CH19 CH21 CH23 V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
CN3 CH0 CH2 CH4 CH6 CH8 CH10 V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
CN4 CH1 CH3 CH5 CH7 CH9 CH11
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
1.2K/2W
TB-24P • 5
The CN5 is an opto-22 compatible connector, which pin assignment is shown as the following figure.
CN5 pins definition
port C data 7
port C data 6
Port B data 7
Port A data 7
+5V
Port B data 6
Port B data 5
Port B data 4
Port B data 3
Port B data 2
Port B data 1
Port B data 0
Port A data 6
Port A data 5
Port A data 4
Port A data 3
Port A data 2
Port A data 1
Port A data 0
Port C data 5
Port C data 4
Port C data 3
Port C data 2
Port C data 1
Port C data 0
Opto-22 Connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
6 • TB-24R
2
TB-24R 24 Relay Outputs Terminal Board
2.1 Introduction
TB - 24R is an output extension board with 24 relays. CN1, CN2, CN3 and CN4 are terminal blocks to connect with external devices. CN5 connect with external power source. TB-24R/12 uses +12V power, but TB-24R/24 uses +24V power. CN6 is used to connect the opto-22 compatible connector, such as ACL-7122, ACL-7124, PET-48DIO, PCI-7248/96 etc.
TB-24R • 7
2.2 Specification
Indication display: 24 LEDs
Relay type: High sensitive 1500 V FCC surge with standing miniature relay. Relay form: SPDT Contact rating:
Max. switching power 60 W, 125 VA Max. switching voltage 220 V DC, 250 V AC Max. switching current 2 A DC, AC Max. carrying current 3 A DC, AC UL/CSA rating 0.6 A 125 V AC UL/CSA rating 0.6 A 110 V DC UL/CSA rating 2 A 30 V DC
Coil voltage: 12 V DC for TB-24R/12 24V DC for TB-24R/24
8 • TB-24R
2.3 Description
TB-24R has six connectors. The figure as below is the placement of these connectors.
Outline of TB - 24R
The 24 LEDs are the indicators of output channels. The mapping of LED and Logic definition are shown as the following table.
LED No. Indication Display
Color of LED Channel
LED0 PA0 GREEN CH0 | | | | LED7 PA7 GREEN CH7 LED8 PB0 YELLOW CH8 | | | | LED15 PB7 YELLOW CH15 LED16 PC0 RED CH16 | | | | LED23 PC7 RED CH23
LEDs Mapping Table
Logic "0" LED " ON" Logic "1" LED "OFF"
Logic Define Table
TB-24R • 9
CN1, CN2, CN3 and CN4 are terminal blocks to be connected with external device.
Each output channel has three terminals, the definition of each terminal is shown as the following figure.
Channel No. Common Normal close Normal open
Terminal block definition of each channel
The mapping of channel number and connector number is shown as the following figure.
CN1 CH12 CH14 CH16 CH18 CH20 CH22 CN2 CH13 CH15 CH17 CH19 CH21 CH23
CN3 CH0 CH2 CH4 CH6 CH8 CH10 CN4 CH1 CH3 CH5 CH7 CH9 CH11
The relationship of channel number and CN1,CN2,CN3,CN4
The CN5 is used to connect with external power source. The following figure shows CN5 connection.
+12V GND
CN5 Connection
+24V for TB-24R/24
+12V for TB-24R/12
10 • TB-24R
The output circuits are shown as the following figure.
+12V
TB-24R/12:Relay is DSIE-S-DC12V, it need +12V power source
TB-24R/24:Relay is DSIE-S-DC24V, it need +24V power source
Power Source
TB-24R • 11
The CN6 is used to connect with opto-22 compatible connector, such as ACL-7122, ACL-7124, or PET-48DIO, PCI-7248/96 etc. the pin assignment is defined as the following figure.
port C data 7
port C data 6
Port B data 7
Port A data 7
+5V
Port B data 6
Port B data 5
Port B data 4
Port B data 3
Port B data 2
Port B data 1
Port B data 0
Port A data 6
Port A data 5
Port A data 4
Port A data 3
Port A data 2
Port A data 1
Port A data 0
Port C data 5
Port C data 4
Port C data 3
Port C data 2
Port C data 1
Port C data 0
Opto-22 Connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
CN6 pin definition
12 • TB-16P8R
3
TB-16P8R 16 Opto-isolated Inputs & 8 Relay Outputs Terminal Board
3.1 Introduction
The TB-16P8R is input / output extension board with 16 input channels and 8 output channels. All inputs channels are with photo couplers, and all outputs are with relays. Terminal blocks on TB-16P8R are used to connect with external devices. TB-16P8R has the same photo coupler circuitry as the TB-24P, please refer to TB-24P for details.
TB-16P8R • 13
3.2 Specification
Indication Display: 24 LEDs for input/output indication Input electrical characteristically:
Logic input low voltage: < 0.8 V DC
Logic input high voltage: +3V DC to +24V DC
Logic input high current: 6.3mA to 50mA
Logic "1": Voltage input high
Logic "0": Voltage input low
Isolation voltage: 2500V DC
Relay type: High sensitive 1500 V FCC
surge with standing miniature
relay.
Relay form: SPDT
Contact rating:
Max. switching power 60 W, 125 VA Max. switching voltage 220 V DC, 250 V AC Max. switching current 2 A DC, AC Max. carrying current 3 A DC, AC UL/CSA rating 0.6 A 125 V AC UL/CSA rating 0.6 A 110 V DC UL/CSA rating 2 A 30 V DC
Coil voltage: 12 V DC for TB-16P8R/12
24 V DC for TB-16P8R/24
14 • TB-16P8R
3.3 Description
TB-16P8R has 6 connectors and 24 LEDs. The following Figure shows the placement of TB-16P8R.
TB-16P8R Outline
The CN5 is used to connect with external power source.
The CN1, CN2 are terminal blocks for input connection.
The CN3, CN4 are terminal blocks for output connection.
The CN6 is used to connect with the opto-22 compatible connector, such as ACL-7122 or PET-48DIO PCI-7248/96. (Please set the I/O mode as mode 7).
The design of input port is same as TB-24P. JP8 to JP23 are for dry contact or using photo coupler setting.
4 6
1 3 5
2
Photo Coupler is used Voltage Input (Factory setting)
TB-16P8R • 15
The input port of TB-16P8R is the same as TB-24P. Each input channel has two terminal blocks. The pin definition of CN1, CN2 is showing as following figure.
CN1 CH8 CH10 CH12 CH14 CH16 CH18 CH20 CH22 V+
V-
V+
V-
V+
V-
V+
V-
V+
V-
V+
V-
V+
V -
V+
V-
CN2
CH9 CH11 CH13 CH15 CH17 CH19 CH21 CH23 V+
V-
V+
V-
V+
V-
V+
V-
V+
V-
V+
V-
V+
V-
V+
V-
The output port of TB-16P8R is the same as TB-24R. Each output channel has three terminals.
Channel No. Common Normal close Normal open
The relationship of channel number and CN3, CN4 is shown as the following table.
CN3 CH0 CH2 CH4 CH6 CN4 CH1 CH3 CH5 CH7
The relationship of LED, channel and output port is showing as table.
LED No. Indication Display Color of LED Channel LED 0 PA0 GREEN CH0
| | | | LED 7 PA7 GREEN CH7 LED8 PB0 YELLOW CH8
| | | |
4 6
1 3 5
2
Photo Coupler is not used
16 • TB-16P8R
LED 15 PB7 YELLOW CH15 LED 16 PC0 RED CH16
| | | | LED 23 PC7 RED CH23
The CN5 is to connect external power source. Figure shows connecting.
+12V GND
+24V for TB-24R/24 +12V for TB-24R/12
TB-16P8R • 17
TB-16P8R/12: Relay is DSIE-S-DC12V and it needs +12V power source
TB-16P8R/24: Relay is DSIE-S-DC24V and it needs +24V power source
The CN6 is an opto-22 compatible connector. The following figure shows the pin definition of CN6.
CN6 pin definition
PORT A: Relay Output PORT B:C : Opto-isolated Input
The 8 relay output channels (8R) connect with PET-48DIO port A through CN6,and 16 photo coupler input channels (16p) connect with PET-48DIO port B,C through CN6.
port C data 7
port C data 6
Port B data 7
Port A data 7
+5V
Port B data 6
Port B data 5
Port B data 4
Port B data 3
Port B data 2
Port B data 1
Port B data 0
Port A data 6
Port A data 5
Port A data 4
Port A data 3
Port A data 2
Port A data 1
Port A data 0
Port C data 5
Port C data 4
Port C data 3
Port C data 2
Port C data 1
Port C data 0
Opto-22 Connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
18 • DIN-24P
4
DIN-24P 24 Opto-isolated Digital Inputs Terminal Board
4.1 Introductions
DIN - 24P is an input extension board with 24 isolated photo couplers. CN7 and CN8 are terminal blocks used to connect with external devices. CN5 is a 50 pin connector used to connect with opto-22 compatible connector, such as ACL-7124, ACL-7122, PET-48DIO… etc, and CN6 is a 50-pin connector used to connect with 50-pin SCSI connector, such as ND-6058. All input channels are with LED indicators.
4.2 Specifications
Indication Display: 24 LEDs for input indication
Input electrical characteristically Logic input low voltage: <0.8 V DC Logic input high voltage: +5V DC to +24V DC Logic input high current: up to 40mA Logic "1": Voltage input high Logic "0": Voltage input low Isolation voltage : 5000Vrms
DIN-24P • 19
4.3 Descriptions
DIN-24P has 4 connectors and 24 LEDs. The following figure shows their placement on DIN-24P.
Outline of DIN-24P
DIN-24P has 24 LEDs to indicate input status, the LED mapping and logic definition are show as the following table.
LED No. Indication Display Color of LED Channel
LED 0 PA0 YELLOW CH0 | | | |
LED 7 PA7 YELLOW CH7 LED8 PB0 GREEN CH8
| | | | LED 15 PB7 GREEN CH15 LED 16 PC0 RED CH16
| | | | LED 23 PC7 RED CH23
LED mapping table
Logic "1" LED " ON" Logic "0" LED "OFF"
Logic define
CN 7
CN 8
LED
CN 6
CN 5
20 • DIN-24P
The DIN-24P can be connected with opto-22 compatible digital I/O board, such as ACL-7122 and PET-48DIO, PCI-7248/96, or digital I/O module equipped with 50-pin SCSI type connector such as ND-6058. Each channel can be connect to external device directly or through a photo coupler, and each photo coupler has a jumper to select the input configuration.
The positioning of each setting jumper
Each input port has two mini jumpers for setting.
1 3 5 JP1
R1
2 4 6
ISO 1
4 6
1 3 5
2 * Photo coupler is used
* It is for “ Voltage Input ”
(Factory setting)
4 6
1 3 5
2
* Photo coupler is used
* It is for “Dry contact”
DIN-24P • 21
The input circuit shows as figure.
The DIN-24P has two terminal blocks. The terminal block pin definitions are shown as the following figure.
CN7
CH22 CH20 CH18 CH16 CH14 CH12 V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
CH23 CH21 CH19 CH17 CH15 CH13 V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
CN8
CH10 CH8 CH6 CH4 CH2 CH0 V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
CH11 CH9 CH7 CH5 CH3 CH1 V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
V+
V -
1 23 45 6
+5V
4.7K
1.2K/2W
22 • DIN-24P
The CN5 is an opto-22 compatible connector, which pin assignment is shown as the following figure.
CN5 pin definition
port C data 7
port C data 6
Port B data 7
Port A data 7
+5V
Port B data 6
Port B data 5
Port B data 4
Port B data 3
Port B data 2
Port B data 1
Port B data 0
Port A data 6
Port A data 5
Port A data 4
Port A data 3
Port A data 2
Port A data 1
Port A data 0
Port C data 5
Port C data 4
Port C data 3
Port C data 2
Port C data 1
Port C data 0
Opto-22 Connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
DIN-24P • 23
The CN6 is an 50-pin SCSI connector, which pin assignment is shown as the following figure.
CN6 pin definition
24 • DIN-24R
5
DIN-24R 24 Relay Outputs Terminal Board
5.1 Introduction
DIN - 24R is an output extension board with 24 relays. J1 and J2 are terminal blocks to connect with external devices. CN9 connects with external power source. DIN-24R/12 uses +12V power, and DIN-24R/24 uses +24V power, CN6 connects to opto-22 compatible boards, such as ACL-7122, ACL-7124, PET-48 DIO, PCI-7248/96, etc. CN7 connects to digital output boards with 50-pin SCSI connector, such as ND-6058.
DIN-24R • 25
5.2 Specification
Indication display: 24 LEDs
Relay type: High sensitive 110V DC (125 VAC)
Surge withstanding miniature relay.
Relay form: SPDT
Contact rating:
Max. switching power 60 W, 125 VA Max. switching voltage 220 V DC, 250 V AC Max. switching current 2 A DC, 0.6AC Max. carrying current 3 A DC, AC UL/CSA rating 0.6 A 125 V AC UL/CSA rating 0.6 A 110 V DC UL/CSA rating 2 A 30 V DC
Coil voltage: 12 V DC for DIN-24R/12
24 V DC for DIN-24R/24
26 • DIN-24R
5.3 Description
DIN-24R has five connectors. The following figure shows the placement of these connectors.
Outline of DIN - 24R
The 24 LEDs are indicators of output channels. The mapping of LED and Logic definition are shown as the following table.
LED No. Indication Display Color of LED ChannelLED0 PA0 RED CH0 | | | | LED7 PA7 RED CH7 LED8 PB0 YELLOW CH8 | | | | LED15 PB7 YELLOW CH15 LED16 PC0 GREEN CH16 | | | | LED23 PC7 GREEN CH23
LEDs Mapping Table
Logic "0" LED " ON" Logic "1" LED "OFF"
Logic Define Table
J1 and J2 are terminal blocks to connect with external device.
Each output channel has three terminals, which definition is shown as the following figure.
J1
LED
LED
J2
CN 9
CN 7CN 6
DIN-24R • 27
Channel No. Common Normal close Normal open
Terminal definition of each channel
The relationship of channel number and J1, J2 are shown as the following figure.
J1
CH22 CH20 CH18 CH16 CH14 CH12 CH23 CH21 CH19 CH17 CH15 CH13
J2
CH10 CH8 CH6 CH4 CH2 CH0 CH11 CH9 CH7 CH5 CH3 CH1
The CN9 is used to connect with external power source. The following figures show CN9 connection.
+12VGND
CN5 connection
+24V for DIN-24R/24 +12V for DIN-24R/12
28 • DIN-24R
The output circuit is shown as the following figure.
+12V
DIN-24R/12: Relay is DSIE-S-DC12V, and it need +12V power source
DIN-24R/24: Relay is DSIE-S-DC24V, and it need +24V power source
Power Source
DIN-24R • 29
The CN6 is used to connect with opto-22 compatible boards, such as ACL-7122, ACL-7124, PET-48DIO, etc. Its pin assignment is defined as the following figure.
port C data 7
port C data 6
Port B data 7
Port A data 7
+5V
Port B data 6
Port B data 5
Port B data 4
Port B data 3
Port B data 2
Port B data 1
Port B data 0
Port A data 6
Port A data 5
Port A data 4
Port A data 3
Port A data 2
Port A data 1
Port A data 0
Port C data 5
Port C data 4
Port C data 3
Port C data 2
Port C data 1
Port C data 0
Opto-22 Connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
CN6 pins define figure
30 • DIN-24R
The CN7 is used to connect with DIO board with 50-pin SCSI connector, such as ND-6058. Its pin assignment is defined as the following figure.
CN7 pin definition
DIN-24G • 31
6
DIN-24G 24 I/O Module Terminal Board
6.1 Introduction The DIN-24G is I/O module terminal board with 24 positions to mount I/O module. The types of module include DC input, DC output, AC input, AC output. And it could extend the application of DI/O cards and DI/O modules.
6.2 Specification
1. Supply 24 position mount I/O modules.
2. Supply terminal blocks to connect with external device.
3. Support 50 pin straight header connector to connect with DAQ boards.
32 • DIN-24G
6.3 Description DIN-24G has 6 connectors. The following Figure shows the placement on Din-24G.
DIN-24G Outline
The Logic Supply is to supply logic power for the operation of modules.
The Terminal Block is terminal block for field wiring.
The 50-pin connector is to connect the NuDAQ or NuDAM.
The 24 positions are to connect with I/O rack module.
50pin connector
LogicSupply Terminal Block connector
24 Poisitions for I/O Rack Module
DIN-24G • 33
The following is pin definition of 50-pin connector.
port C data 7
port C data 6
Port B data 7
Port A data 7
+5V
Port B data 6
Port B data 5
Port B data 4
Port B data 3
Port B data 2
Port B data 1
Port B data 0
Port A data 6
Port A data 5
Port A data 4
Port A data 3
Port A data 2
Port A data 1
Port A data 0
Port C data 5
Port C data 4
Port C data 3
Port C data 2
Port C data 1
Port C data 0
Opto-22 Connector
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
45
47
49
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
46
48
50
34 • Warranty Policy
Warranty Policy
Thank you for choosing ADLINK. To understand your rights and enjoy all the after-sales services we offer, please read the following carefully.
1. Before using ADLINK’s products please read the user manual and follow the instructions exactly. When sending in damaged products for repair, please attach an RMA application form which can be downloaded from: http://rma.adlinktech.com/policy/.
2. All ADLINK products come with a limited two-year warranty, one year for products bought in China.
• The warranty period starts on the day the product is shipped from ADLINK’s factory.
• Peripherals and third-party products not manufactured by ADLINK will be covered by the original manufacturers' warranty.
• For products containing storage devices (hard drives, flash cards, etc.), please back up your data before sending them for repair. ADLINK is not responsible for any loss of data.
• Please ensure the use of properly licensed software with our systems. ADLINK does not condone the use of pirated software and will not service systems using such software. ADLINK will not be held legally responsible for products shipped with unlicensed software installed by the user.
• For general repairs, please do not include peripheral accessories. If peripherals need to be included, be certain to specify which items you sent on the RMA Request & Confirmation Form. ADLINK is not responsible for items not listed on the RMA Request & Confirmation Form.
3. Our repair service is not covered by ADLINK's guarantee in the following situations:
• Damage caused by not following instructions in the User's Manual.
• Damage caused by carelessness on the user's part during product transportation.
• Damage caused by fire, earthquakes, floods, lightening, pollution, other acts of God, and/or incorrect usage of voltage transformers.
Warranty Policy • 35
• Damage caused by inappropriate storage environments such as with high temperatures, high humidity, or volatile chemicals.
• Damage caused by leakage of battery fluid during or after change of batteries by customer/user.
• Damage from improper repair by unauthorized ADLINK technicians.
• Products with altered and/or damaged serial numbers are not entitled to our service.
• This warranty is not transferable or extendible.
• Other categories not protected under our warranty.
4. Customers are responsible for all fees necessary to transport damaged products to ADLINK.
For further questions, please e-mail our FAE staff: [email protected]