Business EnergyManager

A helpful way to monitor the energy you use.

Quick start guide

Helping our customers. We’re on it.

1 x wireless display

1 x transmitter

1 x sensor

1 x quick start guide

6 x AA batteries

Your box contains

1

Insert batteriesInsert 3 x AA batteries into the wireless display and 3 x AA batteries into the transmitter.

Attach the sensor to your meterThe clamp needs to be secured to the main feed from your electricity meter. This is the cable that runs out of the meter and into the premises. To attach the clamp, pull the clasp to open the sensor. Clamp the sensor around the electricity feed on your meter and push the clasp shut. Insert the sensor into the base of the transmitter.

If you need more than one sensor, you can plug in additional sensors into the transmitter, into the additional ports.

If you are concerned about installation please contact an electrician. Ensure cables are not damaged and do not cut cables. You will need one Business EnergyManager per meter.

2

Link transmitter and displayPush the link button located on the back of the display unit. The link icon on the screen will flash.

Press the button on the transmitter to complete synchronisation. If the link is completed you will see the link icon is back on the screen.

3Your energy monitor may not be 100% accurate due to variances in voltage, but it will give you a consistent view of how much electricity you’re using.

Setting date and time

Mode/SetBWD FWD

Time set

Find the time set button located on the back of the display. Hold for two seconds. Use the backward and forward buttons to set the date and time. Press the mode/set button to move to the next setting.

4

Setting other information

Mode/Set

1. Voltage

2. Currency

4. Energy cost

5. Carbon emissions

6. Alarm

7. Temperature

3. Tariff BWDHistory FWD

(see page 8 for further instructions on tariff settings)

Following these instructions will make your Business EnergyManager even more accurate.

The mode/set button will navigate you through the options.

Use the forward and backward buttons to change the values presented.

Press and hold the mode/set button for two seconds. Use the backward and forward buttons to set the numbers. Press the mode/set button to move on to the next setting. During the set up process, push the history button at any time for your settings to be saved and to exit the function setting mode.

5

Setting multiple tariffsFour tariffs can be set for the different rates eg day rate could be Tariff 1 and night rate could be Tariff 2.

1. Press and hold the mode/set button for two seconds.

2. Press the mode/set button two more times to find the tariff mode.

3. Using the forward and backward buttons, set your unit rate for tariff 1.

4. You can move through the different units by pressing the mode/set button.

6You can add multiple tariffs by repeating the instructions above and selecting a different tariff number.

Mode/SetBWD FWD

7

Setting multiple tariffs

5. Once you’ve input the unit rate for tariff 1, press the mode/set button to save and exit.

6. When setting the prices for tariffs 2, 3 or 4, you will need to set the start and end time of those prices. You can do this by using the forward and backward buttons to select the correct hours and minutes and then press the mode/set button to save.

You can add multiple tariffs by repeating the instructions above and selecting a different tariff number.

Mode/SetBWD FWD

Energy now modeThe ‘Energy now’ mode is always visible. It shows you real time usage and is displayed in the top half of the screen. Push the mode/set button to change information displayed from kW to cost.

8

ENERGY NOW

PER£

kW

DAY

HumidityTemperature

Alarm onBattery warnings:

TransmitterDisplay

ENERGY NOW

PER£

kW

DAY

HumidityTemperature

Alarm onBattery warnings:

TransmitterDisplay

Average mode

ENERGY NOW

PER£

kW

DAY

History Mode/Set

The ‘Average’ information is always visible, and is displayed in the bottom half of the screen. The information shown in this mode is the average calculated since the monitor was switched on for the first time.

Push the mode/set button to change daily average units to per hour or carbon emissions.

9

History mode

HISTORY

AVERAGEDAY

DATE

kWh

kWh

History Mode/Set

Push the ‘History’ button to access the historical consumption data. The ‘History’ mode allows access to the information stored on the display from previous weeks and months.

Push the ‘History’ button to access daily, weekly and monthly information. Use the backward and forward buttons to scroll through information. Push the mode/set button to change the units between kWh, cost and carbon emissions.

10

Want to know more?Looking for more ways to reduce your bill? See our range of tools and advice at eonenergy.com/energymanager

E.ON Energy Solutions Limited. Registered office: Westwood Way, Westwood Business Park, Coventry, CV4 8LG. Registered in England and Wales No. 3407430. EB

EMw

eb/0

4/14