rental guide - rentals, construction, heavy equipment, new ... · • rentals available nationwide...

RENTAL GUIDE

Largest Independent Rental Fleet in the Midwest!

One Call Rents It All! 815-941-1900

Revised 06/2020

www.iltruck.com2

ABOUT US

AUTHORIZED DEALER

ONE CALL RENTS IT ALL!

Morris, Illinois Location

• Founded in 1989 by Owner & President Rolf Helland• 2 Locations: Morris, IL and Triadelphia, WV• Company Owned Transportation Fleet

815-941-1900 [email protected]

• Founded in 1989 by Owner & President Rolf Helland

• 2 Locations! Morris, IL and Triadelphia, WV

• $135 Million Dollar Rental Inventory

• Company Owned Transportation Fleet

• Rentals Available Nationwide

• Over 2,000 Units Available!MAKE MODEL HP LIFT CAPACITY DAY WEEK 4 WEEK

N.H. L328 74 2,800 lbs. $250 $750 $2,250N.H. L234 90 3,400 lbs. $285 $850 $2,500N.H. L234 90 Hi Flow 3,400 lbs. $350 $1,000 $3,000

WHEELED SKID STEERS

DESCRIPTION DAY WEEK 4 WEEK

Hydraulic Auger w/1 bit $125 $300 $900Extra Bit $50 $150 $450Auger Extensions $15 $45 $135Rammer 555 Hydraulic Hammer $195 $585 $1,750Pallet Forks 48" $35 $100 $300AMI Mat Grapple Forks 72" $125 $350 $1050Bradco 640 Trencher $150 $450 $1,350Bradco Scrap Grapple Bucket 83" $125 $350 $1,050Rock Bucket 84" $100 $300 $900FFC Power Box Rake 90" $150 $450 $1,350FFC Auto Rake 76" $200 $585 $1,750FFC Roto-Tiller 68" $200 $585 $1,750Domor SSHA DuraGrader 72" $200 $585 $1,750

SKID STEER ATTACHMENTS

MAKE MODEL HP LIFT CAPACITY DAY WEEK 4WEEK

N.H. C227 74 2,700 lbs. $300 $900 $2,700N.H. C237 74 3,700 lbs. $375 $1,100 $3,300N.H. C238 90 3,800 lbs. $425 $1,250 $3,750N.H. C238 90 Hi Flow 3,800 lbs. $475 $1,425 $4,275N.H. C245 90 Hi Flow 4,500 lbs. $475 $1,425 $4,275 Bobcat T870 99 5,030 lbs. $475 $1,425 $4,275

TRACK SKID STEERS

N.H. L234 w/Bucket

N.H. C237 w/Brush Cutter


Sweepster Pick Up Broom 72" * $150 $450 $1,350Sweepster Angle Push Broom 84" * $150 $450 $1,350Bradco Brush Cutter 72" * $200 $585 $1,750Hard Rubber Tires** $75 $225 $675LaBounty MSD7R Shear*** n/a $1,250 $3,750Burchland Silt Fencer 72" $175 $525 $1,575Vibratory Trench Roller 18" $175 $575 $1,575Fecon BH74SS High Flow Mulcher**** $400 $1,200 $3,600FFC Cold Planer 30" High Flow $400 $1,200 $3,600ProTech 8' Snow Push Box n/a n/a $695Burchland EZR Material Roller $150 $450 $1,350Bradco Dozer Blade 90" $200 $585 $1,750** Installation and damage charges additional. *** 10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater. **** Customer responsible for broken/missing teeth.

* Bristle wear charged at $125 per inch. * Customer responsible for damaged blades.

Angle Push Broom

Grapple Bucket

Dozer Blade

Auger w/Bit

MSD7R Shear

Snow Push Box

Cold Planer Rock

Bucket

N.H. L328 w/Hammer

N.H. C245 w/Mat Grapple Forks

SKID STEERS

Auto Rake

N.H. C238 w/Power Box Rake

PalletForks

Silt Fencer

N.H. L234 w/Trencher

N.H. L328 w/Pick Up Broom

N.H. C238 w/Mulcher

www.iltruck.com4

DESCRIPTION SPECS DAY WEEK 4 WEEK

Forks Cat 420/430 $50 $150 $450Extra Backhoe Bucket Cat 420/430 $35 $100 $3004 in 1 Bucket Cat 420/430 $75 $175 $500FFC / Sweepster* 8' Angle Broom $150 $450 $1,350Allied Plate Compactor** Ho-Pac 1000B $195 $585 $1,750Allied Hammer*** Rammer 777 $350 $1,000 $2,250Caterpillar Pickup Broom* BP25 98" $275 $850 $2,500Caterpillar Angle Broom* BA25 98" $150 $450 $1,350

BACKHOE LOADER ATTACHMENTS

MAKE MODEL HP CAPACITY DAY WEEK 4 WEEK

Caterpillar 420F 102 1.4 yd. Loader, 17' 9" Dig Depth

$275 $850 $2,500

Caterpillar 420F IT 100 1.3 yd. Loader, 17' 9" Dig Depth

$325 $1,000 $2,950

Caterpillar 430F IT 117 1.4 yd. Loader, 19' 6" Dig Depth

$375 $1,125 $3,375

Caterpillar 430F IT 117 w/Hydraulic Thumb

$400 $1,200 $3,600

BACKHOE LOADERS

* Bristle wear charged at $125 per inch. ** Customer is responsible for all jumper line damage & repair. ** Customer is responsible for isolator replacement. *** Customer is responsible for greasing hammer at recommended intervals. *** Customer is responsible for all hydraulic hose damage and repair. *** Customer is responsible for all tool repair and damage.

Caterpillar 430F IT w/Forks

Caterpillar 420FIT w/Cat BA25 Broom

Caterpillar BP25 Pickup Broom

Ho-Pac 1000B Plate Compactor

Rammer 777 Hammer

Caterpillar 420F IT w/Cribbing Bucket

BACKHOE LOADERS

Bucket



Forks: ZW150/ZW180 $95 $250 $750Forks: ZW220/ZW250 $125 $350 $1,000Forks: ZW310/ZW370 $150 $450 $1,250Pipe Clamp Forks: ZW150/ZW180 $350 $1,000 $2,500Pipe Clamp Forks: ZW310/ZW370 $400 $1,200 $3,500Grapple Forks: ZW150/ZW180 $225 $675 $2,000Grapple Forks: ZW310/ZW370 $400 $1,200 $3,500Angle Broom: ZW150/ZW180* $250 $750 $2,000Jib Boom: ZW150/ZW180 $50 $150 $450Jib Boom: ZW220/ZW250 $75 $225 $675Jib Boom: ZW310/ZW370 $125 $350 $1,00014' Snow Push Box n/a n/a $1,150

WHEEL LOADER ATTACHMENTS

* Bristle wear charged at $125 per inch.

Forks

Grapple Forks

Hitachi ZW370w/Pipe Clamps

Hitachi ZW370

Hitachi ZW180


N.H W80C TC 82 1.44 yds. $350 $1,050 $3,150Hitachi ZW150 141 2.8 yds. $465 $ 1,395 $4,150Hitachi ZW180 173 3.4 yds. $550 $ 1,650 $4,950Hitachi ZW220 200 4.2 yds. $675 $ 2,000 $6,000Hitachi ZW250 249 4.5 yds. $800 $ 2,400 $7,200Hitachi ZW310 285 5.0 yds. $1,000 $ 3,000 $9,000Hitachi ZW330 311 6.8 yds. $1,175 $ 3,500 $10,000Caterpillar 972M 298 6.25 yds. $1,225 $ 3,675 $11,000Hitachi ZW370 389 8.1 yds. $1,350 $ 4,000 $12,000

WHEEL LOADERS

• Hydraulic quick coupler machines available.

WHEEL LOADERS

Jib Boom Snow Push Box

New Holland W80C TC

www.iltruck.com6


Caterpillar 953K 148 2.42 yds. $775 $2,300 $6,900*Caterpillar 963K** 194 3.2 yds. $1,100 $3,175 $9,500*Caterpillar 973D 263 4.2 yds. $1,250 $3,750 $11,250*

CRAWLER LOADERS

* Listed 4 week rates allow for a maximum of 125 hours. Monthly rentals will be charged 1/125th the monthly rate for every hour of overage. ** Quick coupler unit available w/forks.

TYPE MAKE MODEL DAY WEEK 4 WEEK

Pin On Forks* Caterpillar 953K $150 $425 $1,250Quick Attach Forks Caterpillar 963K $125 $350 $1,000Rear Ripper Caterpillar 963K $175 $525 $1,575

CRAWLER LOADER ATTACHMENTS

Caterpillar 963K w/Forks

Caterpillar 963K

Caterpillar 963K w/Ripper

CRAWLER LOADERSCaterpillar 953K

* Installation charges may apply.


MAKE MODEL HP SPECS DAY WEEK 4 WEEK

Toro TRX26 26 Walk Behind, 4' Depth $150 $450 $1,350Toro RT600 65 6' Depth $500 $1,500 $4,500Toro RT1200 121 7' Depth $725 $2,175 $6,500Toro RT1200 121 Rubber Tracks 7' Depth $850 $2,500 $7,500

TRENCHERS

Toro RT1200

Toro TRX600

John Deere 670G w/Rear Ripper

MOTOR GRADERS

TRENCHERS Toro TRX26

MAKE MODEL HP WEIGHT DAY WEEK 4 WEEK

Caterpillar 140M2 VHP w/Scarifier

243 43,686 lbs. $950 $2,850 $8,500

John Deere 670G w/Ripper or Scarifier

235 42,395 lbs. $950 $2,850 $8,500

MOTOR GRADERS

Toro RT1200 w/Tracks

John Deere 670G w/Front Scarifier

Caterpillar 140M2 VHP w/Scarifier

www.iltruck.com8


Caterpillar D3K LGP 81 17,800 lbs. $375 $1,125 $3,375Caterpillar D4K LGP 92 18,700 lbs. $425 $1,250 $3,750Caterpillar D5K LGP 100 21,300 lbs. $500 $1,500 $4,500Caterpillar D6K LGP 125 29,700 lbs. $650 $1,925 $5,750Caterpillar D6N LGP 145 40,000 lbs. $825 $2,475 $7,400Caterpillar D6T XW 228 46,000 lbs. $1,000 $3,000 $9,000Caterpillar D6T XW PAT 228 46,000 lbs. $1,000 $3,000 $9,000Caterpillar D6T LGP 228 48,300 lbs. $1,100 $3,175 $9,500Caterpillar D6T LGP PAT 228 48,300 lbs. $1,100 $3,175 $9,500Caterpillar D8T 347 85,000 lbs. n/a $5,175 $15,500Caterpillar D10R 570 146,000 lbs. n/a n/a $27,500

DOZERS

• Accugrade and Top Con ready machines available.

Caterpillar D6T LGP

MAKE MODEL HP SPECS DAY WEEK 4 WEEK

Caterpillar D5K/LGP 100 Winch Unit $925 $2,300 $6,900 Caterpillar D6K/LGP 125 Winch Unit $1,100 $2,750 $8,250Caterpillar D6N/LGP 145 Winch Unit $1,325 $3,300 $9,900Caterpillar D6T XW* 228 Winch Unit $1,600 $4,000 $12,000Caterpillar D6T LGP* 228 Winch Unit $1,675 $4,175 $12,500Caterpillar D8T* 347 Winch Unit $2,350 $5,850 $17,500

WINCH DOZERS

Caterpillar D8T w/Allied Winch

• Units subject to $195 cable inspection upon return. * Angle blades available.

Caterpillar D3K LGPCaterpillar D5K LGP

Caterpillar D6N LGP

DOZERS

Caterpillar D6T LGP w/Allied Winch


FITS TO DAY WEEK 4 WEEK

Caterpiller D6T $175 $525 $1,575Caterpiller D8T $225 $675 $2,000

RIPPER ATTACHMENTS

Caterpillar D8T

MAKE MODEL HP BOOM LIFT CAPACITY WEIGHT DAY WEEK 4 WEEK

Caterpillar D5K LGP 99 Midwestern Side Boom M520C 20,000 lbs. 21,300 lbs. $675 $2,000 $6,000 Caterpillar D6K LGP 125 Midwestern Side Boom M540C 40,000 lbs. 39,000 lbs. $890 $2,675 $8,000 Caterpillar PL61 125 Caterpillar Side Boom 40,000 lbs. 37,500 lbs. $890 $2,675 $8,000

PIPELAYERS / SIDE BOOMS

Caterpillar PL61 w/Cat Boom

Caterpiller D6K LGPw/540C Boom

• Units subject to $195 cable inspection upon return. • Customer responsible for any and all cable damage. • On-site assembly charges may apply.


Base Station & Rover $450 $1,350 $4,000Machine Control $575 $1,675 $5,000

GPS BASE STATION AND MACHINE CONTROL

• 3D modeling available at additional charge. • Set-up charge applies.

Caterpillar D6K2 LGP w/GPS

Caterpillar D6T LGP w/GPS

Caterpillar D8T w/Ripper

Caterpiller D5K LGP w/520C Boom

www.iltruck.com10

MAKE MODEL CAPACITY WEEK 4 WEEK

Bell B25E 19 yds. $2,700 $8,000Bell B30E 22.9 yds. $3,000 $9,000Bell B40E 30 yds. $4,500 $13,500Bell B45E 33 yds. $4,750 $14,500Bell B50E 37 yds. $5,000 $15,000

OFF ROAD DUMP TRUCKS

Bell B45E


Bell B25E 5,000 gal. Tandem Axle $3,500 $10,500Bell B30E 6,000 gal. Tandem Axle $4,000 $12,000

OFF ROAD WATER TRUCKS

Bell B25E w/5,000 Gal. Water Tank

• Tailgate units available

Bell B25E

Bell B30E

ARTICULATED TRUCKS: OFF-ROAD DUMP & WATER


Caterpillar CB24B Roller 47"

Volvo SD115Smooth Drum 84"

MAKE MODEL SPECS / DESCRIPTION DAY WEEK 4 WEEK

Volvo SD45D 54" Drum, Canopy $325 $925 $2,775Bomag BW177 66" Drum, Canopy

or Cab w/AC$400 $1,175 $3,500

Volvo SD115D 84" Drum, Cab w/AC $500 $1,500 $4,500Bomag BW211

BW21384" Drum, Cab w/AC $500 $1,500 $4,500

SMOOTH DRUM COMPACTORSMAKE MODEL SPECS DAY WEEK 4 WEEK

Caterpiller CB24B 47" Double Drum $275 $825 $2,475

ASPHALT ROLLERS

Volvo SD115DPadfoot Single Drum 84"

Caterpillar 815F2 Padfoot Four Drum

* Hydraulic pushblade units available.


Volvo SD45F* 54" Padfoot Single Drum, Canopy $350 $975 $2,925Volvo SD70* 66" Padfoot Single Drum, Canopy/Cab with A/C $450 $1,350 $4,050Bomag BW177* 66" Padfoot Single Drum, Cab with A/C $450 $1,350 $4,050Volvo SD115* 84" Padfoot Single Drum, Cab with A/C $550 $1,650 $4,850Caterpillar 815F2 39" Padfoot Four Drum, Cab with A/C $1,350 $4,000 $12,000

PADFOOT COMPACTORS

Bomag BW211 Smooth Drum 84"

Volvo SD45D Smooth Drum 54" Bomag BW177

Smooth Drum 66"

COMPACTORS SEE PAGE 30 FOR OUR WALK BEHIND COMPACTORS!

www.iltruck.com12

Kobelco SK500 LC


Kobelco SK85CS* 56 18,700 lbs. $425 $1,250 $3,750Kobelco SK140SR LC* 105 31,500 lbs. $500 $1,500 $4,500Kobelco SK140SR LC*

w/Rubber Track Pads105 31,500 lbs. $635 $1,900 $5,350

Kobelco SK140SR LC* w/Offset Boom

94 32,040 lbs. $575 $1,675 $5,000

Kobelco SK170 LC 134 38,800 lbs. $575 $1,675 $5,000Kobelco SK170 LC*

w/Rubber Track Pads134 38,800 lbs. $700 $2,100 $5,850

Kobelco SK210 LC 166 48,500 lbs. $675 $2,000 $6,000Kobelco SK260 LC 185 59,300 lbs. $850 $2,500 $7,500Kobelco SK270SR 166 60,000 lbs. $850 $2,500 $7,500Kobelco SK300 LC 268 68,100 lbs. $950 $2,850 $8,500Caterpillar 328D LCR 204 84,000 lbs. $1,075 $3,175 $9,500Kobelco SK350 LC 286 83,300 lbs. $1,075 $3,175 $9,500Kobelco SK500 LC 369 114,000 lbs. $1,500 $4,500 $13,500Kobelco SK850 LC 500 177,000 lbs. n/a n/a $25,000

KOBELCO EXCAVATORS

* Push blade and rubber pad units available.

Kobelco SK350 LC

MODEL ATTACHMENT DAY WEEK 4 WEEK

SK17SR-SK80CS Bucket $35 $100 $300SK140-SK170 Bucket $80 $160 $480SK210-SK260 Bucket $100 $200 $600SK300-SK500 Bucket $125 $250 $750SK140 Frost Ripper $80 $160 $480SK210-SK270 Frost Ripper $100 $250 $750SK300-SK350 Frost Ripper $135 $300 $900

EXCAVATOR BUCKETS / RIPPER ATTACHMENTS

Excavator Bucket

• Additional fee to weld plate over teeth.Frost Tooth Ripper

Kobelco SK170 LC

EXCAVATORS

Kobelco SK140SR LC w/Rubber Pads

Kobelco SK270SR LC


• Units subject to bucket pin & bushing inspection upon return. • Customer responsible for excessive bucket pin & bushing wear.

* Twist-O-Wrist bucket available. * Hydraulic hammer available.


Caterpillar M315D* 145 35,500 lbs. $785 $2,350 $7,000Caterpillar M322D* 173 47,400 lbs. $1,075 $3,200 $9,500Hitachi ZX220W-3 159 49,888 lbs. $1,075 $3,200 $9,500

WHEELED EXCAVATORS

Caterpillar M322D

Kobelco SK17SR

MAKE MODEL HP DIG DEPTH WEIGHT DAY WEEK 4 WEEK

Kobelco SK17SR 15 7'1" ft. 3,650 lbs. $200 $600 $1,800Kobelco SK35SR 28 10'1" ft. 7,960 lbs. $250 $750 $2,250Kobelco SK45SR 39 11'3" ft. 10,300 lbs. $275 $825 $2,475Kobelco SK55SRX

Open ROPS39 12'10" ft. 11,600 lbs. $250 $750 $2,250

Kobelco SK55SRX 39 12'10" ft. 12,295 lbs. $300 $900 $2,700

KOBELCO MINI EXCAVATORS

MAKE MODEL HP REACH WEIGHT DAY WEEK 4 WEEK

Kobelco SK210 LC 157 50 ft. 52,000 $1,075 $ 3,175 $9,500Kobelco SK260 LC 178 60 ft. 62,600 $1,175 $3,500 $10,500Kobelco SK300 LC 204 63 ft. 76,500 $1,400 $4,175 $12,500

LONG REACH EXCAVATORS

EXCAVATORS: Mini, Wheeled & Long Reach

Kobelco SK55SRX

Kobelco SK35SR

Caterpiller 328D

Hitachi ZX220W-3

Kobelco SK300 LC Long Reach

www.iltruck.com14

MAKE MODEL HP WEIGHT ATTACHMENT DAY WEEK 4 WEEK

Kobelco SK55SRX 39 12,295 lbs. Hydraulic Thumb $375 $1,075 $3,250Kobelco SK85CS 56 18,700 lbs. Hydraulic Thumb $450 $1,350 $4,050Kobelco SK140SR LC 105 31,500 lbs. Hydraulic Thumb/Grapple $635 $1,900 $5,350Kobelco SK170 LC 134 38,800 lbs. Hydraulic Thumb/Grapple $750 $2,175 $6,500Kobelco SK210 LC 166 49,400 lbs. Hydraulic Thumb/Grapple $850 $2,500 $7,500Kobelco SK260 LC 185 56,890 lbs. Hydraulic Thumb/Grapple $1,050 $3,125 $9,375Kobelco SK270SR 166 60,000 lbs. Hydraulic Thumb/Grapple $1,050 $3,125 $9,375Kobelco SK300 LC 268 68,000 lbs. Hydraulic Thumb/Grapple $1,200 $3,600 $10,500Kobelco SK350 LC 286 83,300 lbs. Hydraulic Thumb/Grapple $1,300 $3,850 $11,500Kobelco SK500 LC 369 114,000 lbs. Hydraulic Thumb/Grapple n/a n/a $16,500

EXCAVATORS WITH THUMBS OR GRAPPLES

• Customer is responsible for all damage and excessive wear to thumbs/grapples.

Kobelco SK140SR LC w/TAG Hydraulic Thumb

Kobelco SK140SR LC w/Grapple

Kobelco SK210 w/GR3345 Grapple

• Customer is responsible for all damage, excessive wear & jumper line damage.

MAKE MODEL HP ATTACHMENT WEEK 4 WEEK

Kobelco SK140SR LC 105 AMI GR2433 $2,500 $7,500Kobelco SK210 LC 150 AMI GR4045 $3,250 $9,500Kobelco SK270SR LC 160 AMI GR4045 $3,675 $11,000Kobelco SK260 LC 178 AMI GR4580 $3,850 $11,500

EXCAVATORS WITH MAT GRAPPLESMAKE MODEL 4 WEEK

Timber Pro 830D Forwarder $19,500

ACCESS MAT EQUIPMENT

• Tire chains available at $1,000/4 week.

Timber Pro 830D Forwarder

EXCAVATORS: Thumbs, Grapples & Forwarders

FORWARDERS


• Pipe shoe(s) not included.

MAKE MODEL DAY WEEK 4 WEEK

Vacuworx MC5B w/Remote $550 $1,585 $4,750Vacuworx RC-10 w/Remote $625 $1,875 $5,625

EXCAVATOR PIPELIFTER ATTACHMENTS

Vacuworx MC5B

Vacuworx RC-10

EXCAVATORS: Thumbs, Grapples & Forwarders

MAKE MODEL HP WEIGHT ATTACHMENT WEEK 4 WEEK

Kobelco SK350 LC 286 83,300 lbs. AMI $4,500 $13,500

EXCAVATORS WITH CONCRETE PULVERIZERS

• Price does not include blade wear or tooth wear.

Kobelco SK350 w/Pulverizer


Kobelco SK210 LC 166 48,500 lbs. MSD1500R $7,000 $14,000Kobelco SK350 LC 286 83,300 lbs. MSD2500R $10,750 $21,500Kobelco SK500 LC 369 114,000 lbs. MSD3000R $12,000 $24,000

EXCAVATORS WITH SHEARS 2ND MEMBER

• Customer is responsible for all jumper line damage & repair. • Price does not include blade wear, tooth wear and maintenance. • 10% blade wear surcharge or actual blade wear cost will be added to rate, whichever is greater.

Kobelco SK500 w/MSD 3000R Shear

Kobelco SK85CS w/MSD7R Shear


Kobelco SK85CS 56 18,700 lbs. MSD7R $2,300 $6,850

EXCAVATORS WITH SHEARS 3RD MEMBER

Kobelco SK350 LC w/RC-10 Pipelifter

MSD 2500R Shear

MSD 1500R Shear

EXCAVATORS: Shears, Pulverizers & Pipelifters

PIPELIFTERS

www.iltruck.com16

Kobelco SK140SR LC w/1655 Rammer

MAKE MODEL HP WEIGHT ATTACHMENT IMPACT ENERGY DAY WEEK 4 WEEK

Kobelco SK55SRX 39 12,295 lbs. Rammer 777 550 ft. lb. $495 $1,485 $4,450Kobelco SK85CS 56 18,700 lbs. Rammer 999 1,200 ft. lb. $625 $1,875 $5,675Kobelco SK140SR LC 105 31,500 lbs. Rammer 1655 2,500 ft. lb. $925 $2,750 $8,250Kobelco SK170SR LC 134 38,800 lbs. Rammer 1655 2,500 ft. lb. $975 $2,925 $8,750Kobelco SK210 LC 166 48,500 lbs. Rammer 2166 3,500 ft. lb. $1,275 $3,825 $11,450Kobelco SK270SR LC 166 60,000 lbs. Rammer 2166 3,500 ft. lb. $1,400 $4,225 $12,700Kobelco SK260 LC 185 56,890 lbs. Rammer 2577 5,000 ft. lb. $1,600 $4,725 $14,250Kobelco SK300 LC 268 68,100 lbs. Rammer 3288 8,000 ft. lb. n/a $5,850 $17,500Kobelco SK350 LC 286 83,300 lbs. Rammer 3288 8,000 ft. lb. n/a $6,175 $18,500Kobelco SK500 LC 369 114,400 lbs. Rammer 4099 11,000 ft. lb. n/a $8,150 $24,500

EXCAVATORS WITH HAMMERS

• Add $1,000 mo. for Underwater kit. • Customer is responsible for greasing hammer at recommended intervals. • Customer is responsible for all hydraulic hose damage and repair. • Customer is responsible for all tool repair and damage.


Kobelco SK85CS 56 18,700 lbs. McMillen Auger $575 $1,675 $5,000Kobelco SK140SR 105 31,500 lbs. Premier Auger $850 $2,500 $7,500Kobelco SK170LC 134 38,800 lbs. Premier Auger $900 $2,675 $8,000Kobelco SK210LC 166 48,500 lbs. Premier Auger $1,000 $3,000 $9,000

EXCAVATORS WITH AUGER SYSTEMKobelco SK85SR LC

w/Auger

EXCAVATORS: Hammers & Augers

Kobelco SK170 LC w/Auger

Kobelco SK260 LCw/2577 Rammer


MAKE MODEL HP WEIGHT ATTACHMENT PLATE SIZE DAY WEEK 4 WEEK

Kobelco SK55SRX 39 12,295 lbs. Allied Ho-Pac 400B 13" x 27" $400 $1,200 $3,600Kobelco SK85CS 56 18,700 lbs. Allied Ho-Pac 1000B 24" x 28" $525 $1,575 $4,775Kobelco SK140SR LC 105 31,500 lbs. Allied Ho-Pac 1600VMS 29" x 32" $675 $2,085 $6,250Kobelco SK170SR LC 134 38,800 lbs. Allied Ho-Pac 1600VMS 29" x 32" $800 $2,425 $7,250Kobelco SK210 LC 166 49,400 lbs. Allied Ho-Pac 2300VMS 34" x 36" $900 $2,750 $8,250Kobelco SK270SR LC 166 60,000 lbs. Allied Ho-Pac 2300VMS 34" x 36" $1,075 $3,250 $9,750Kobelco SK260 LC 185 56,890 lbs. Allied Ho-Pac 2300VMS 34" x 36" $1,075 $3,250 $9,750Kobelco SK300 LC 268 68,100 lbs. Allied Ho-Pac 4000VMS 42" x 48" n/a $3,700 $11,000Kobelco SK350 LC 286 83,300 lbs. Allied Ho-Pac 4000VMS 42" x 48" n/a $4,025 $12,000

EXCAVATORS WITH PLATE COMPACTORS

• Customer is responsible for all jumper line damage & repair. • Customer is responsible for isolator replacement.

Kobelco SK140SR w/Ho-Pac 1600


Kobelco SK85CS 56 18,700 lbs. Blue Diamond 50" $650 $1,925 $5,750

EXCAVATORS WITH BRUSH CUTTER

• Customer is responsible for all jumper line damage & repair. • Price does not include blade wear and maintenance.

Kobelco SK85SR LC w/Brush Cutter

Anvil HC4 Clamshell Bucket

MAKE MODEL HP WEEK 4 WEEK

Kobelco SK300 268 $4,350 $13,000Kobelco SK350 286 $4,675 $14,000

EXCAVATORS WITH CLAMSHELL BUCKET


EXCAVATORS: Compactors & Brush Cutters

Kobelco SK210 w/Ho-Pac 2300

MAKE MODEL HP WEEK 4 WEEK

Kobelco SK300 268 $4,350 $13,000Kobelco SK350 286 $4,675 $14,000

EXCAVATORS WITH SCREENING BUCKET


Okada TMB-120 Screening Bucket

www.iltruck.com18


Morooka MST1500VD Seats 10 $2,850 $8,500

OFF ROAD RUBBER TRACK PERSONNEL CARRIERSMAKE MODEL CAPACITY WEEK 4 WEEK

Morooka MST1500VD 13,890 lbs. $2,350 $7,000Morooka MST2200VD 22,046 lbs. $3,000 $9,000

OFF ROAD RUBBER TRACK FLATBEDS


Morooka MST300VD 5,000 lbs. $850 $2,700Morooka MST1500VD 13,890 lbs. $2,350 $7,000Morooka MST2200VD 22,046 lbs. $3,000 $9,000Morooka MST3000VD 33,100 lbs. $4,000 $12,000

OFF ROAD RUBBER TRACK DUMPERS

Morooka MST1500VD Carrier

Morooka MST300VD Dumper

Morooka MST1500VD Flatbed


TRACK TRUCKS




Morooka MST1500VD

w/XP375 Compressor & Marco Blast Pot


Morooka MST1500VD 13,890 lbs. $3,175 $9,525Morooka MST2200VD 22,046 lbs. $4,025 $11,525

OFF ROAD RUBBER TRACK SANDBLASTERSMAKE MODEL WEEK 4 WEEK

Morooka MST1500VD $2,850 $8,500Morooka MST2200VD $3,500 $10,500

OFF ROAD RUBBER TRACK STRAW BLOWERS

Morooka MST1500VD

w/Finn Straw Blower


Morooka MST2200VDR 360○ Rotation

24,255 lbs. $4,000 $12,000

OFF ROAD ROTATING RUBBER TRACK DUMPERS

Morooka MST2200VDR 360 Rotating Dumper

Morooka MST2200VD

w/Finn T170 Seeder

MAKE MODEL WEEK 4 WEEK

Morooka MST2200VD $5,000 $15,000

OFF ROAD RUBBER TRACK SEEDERS

Morooka MST1500VD

w/Vermeer LP573SDT

MAKE MODEL WEEK 4 WEEK

Morooka MST1500VD $3,850 $11,500

OFF ROAD RUBBER TRACK VACUUMS

www.iltruck.com20

Challenger MT755D

New Holland T7.190

New Holland T9.600

New Holland Workmaster 50

New Holland T8.380

TRACTORS

MAKE MODEL HP TYPE DAY WEEK 4 WEEK

New Holland Workmaster 50 53 Wheeled w/Loader $275 $800 $2,400New Holland T4.75 74 Wheeled $300 $900 $2,700New Holland T6.165 135 Wheeled $500 $1,500 $4,500New Holland T7.190 150 Wheeled $550 $1,650 $4,950New Holland T8.380 311 Wheeled $850 $2,500 $7,500New Holland T8.390 340 Wheeled $850 $2,500 $7,500Challenger MT755D/MT765D 327 Rubber Track $900 $2,700 $8,000New Holland T9.530 407 Wheeled n/a $3,850 $11,500New Holland T9.600 535 Wheeled n/a $4,175 $12,500

AGRICULTURAL TRACTORS



Youngs Welding

4048 Roller

2-48" Padfoot Drums, 40" dia., Tow Behind

$200 $600 $1,800

SHEEPSFOOT ROLLER

Youngs Welding 4048

MAKE MODEL SPECS DAY WEEK 4 WEEK

Woods DHM6N 6' wide, 3 pt. Mount $155 $465 $930Rome OT-10 10' wide, 24" Blades $275 $800 $2,400Rome TAW20S 9' 6" wide, 32" Blades $350 $1,100 $3,300Rome TACW-16 11' wide, 32" Blades $400 $1,200 $3,600Rome TRCW-16 12' 6" wide, 42" Blades $600 $1,800 $5,400Kuhn 7300 21' wide, 22" Blades $400 $1,200 $3,600John Deere 630 26' wide, 22" Blades $400 $1,200 $3,600

DISC HARROWS

Rome TAW20S

Kuhn 7300

Rome GK-XII

Rome OT-10

SCRAPERS, DISCS & ROLLERS

Ashland 215TS2

MAKE MODEL CAPACITY TYPE DAY WEEK 4 WEEK

Rome GK-XII 12' wide12' Roller

Leveling w/Smooth Drum

$400 $1,200 $3,600

Ashland 215TS2 21.5 yd. Ejector $450 $1,350 $4,000Ashland 220TS4 22 yd. Ejector $500 $1,500 $4,500

SCRAPER PANS & LEVELING SCRAPER

Ashland 220TS4

www.iltruck.com22

Bowie Crimp Disc

MAKE MODEL DESCRIPTION / SPECS DAY WEEK 4 WEEK

Land Pride CR2572 6' wide, 6" Spacing $125 $350 $1,050Bowie Crimp Disc 8' wide, 6" Spacing $175 $500 $1,500Burchland SCX 8' wide, 8" Spacing $175 $500 $1,500

CRIMP DISCS

MAKE MODEL DESCRIPTION HP DAY WEEK 4 WEEK

Finn B70T Skid/Trailer 34 $300 $750 $2,250

STRAW BLOWERS

Finn B70T


Vermeer BPX9000 3 pt., 1,000 RPM PTO $395 $1,175 $3,500Haybuster 2574 3 pt., 1,000 RPM PTO

360º Discharge Spout$500 $1,500 $4,500

BALE PROCESSORS

Vermeer BPX9000

MAKE MODEL DAY WEEK 4 WEEK

Schulte 2500 Rock Picker $300 $900 $2,700Schulte SRW1400 Windrower $275 $850 $2,500

ROCK PICKERS & WINDROWERS

Schulte 2500


Unverferth 132 3 pt., 5 Shank Ripper $300 $850 $2,500Great Plains SS1300 3 pt., 5 Shank Ripper $300 $850 $2,500

RIPPERS

Schulte SRW 1400


Broadcast N/A 3-Point $95 $295 $595Brillion LSS6 6' 3-Point $225 $600 $1,800Kubota APPS 2086 7' 3-Point $235 $700 $2,100Brillion SSBP10 8 ft. Pull $250 $800 $2,400

SEEDERS

Brillion LSS-6

AGRICULTURE: Rippers, Seeders & More

Great PlainsSS1300

Unverferth 132


MAKE SPECS / CAPACITY DAY WEEK 4 WEEK

Multiquip WTE5HP, 2" High Pressure Pump, 250 ft. Head Pressure, 106 gpm, Trailer Mounted w/525 gal. Tank

$100 $300 $900

PRESSURE WASHER TRAILERS

Thompson 6TSCDJD-ST45T 6"


Vermeer Vactron LP573SDT

500 gal. Debris Tank, 1,000 CFM Vacuum, 4,000 psi @ 4gm

$500 $1,500 $4,500

VACUUMS

Multiquip WTE5HP

Woods 15' Batwing

AGRICULTURE: Rippers, Seeders & More PUMPS, VACUUMS & MOWERS

VermeerVactron LP573SDT

SIZE DAY WEEK 4 WEEK

3"x20' $6 $18 $544"x20' $15 $45 $1356"x20' $50 $100 $300

SUCTION HOSESSIZE DAY WEEK 4 WEEK

3"x50' $6 $18 $544"x50' $15 $45 $1356"x50' $50 $100 $300

DISCHARGE HOSES


Woods BB60XC 60" 3 pt. Mower $200 $600 $1,200Woods BW1800XQ 15' Batwing Mower $350 $1,000 $3,000

MOWING EQUIPMENT


Multiquip QP3TH 3" Trash Pump, Gas $75 $200 $600Thompson 6TSCDJD-

ST45T6" Trash Pump, DSL, Self Priming

$200 $600 $1,800

WATER PUMPS

• Single shift rates. • Double shift (8-16 hours/day) 1.5 x rate. • Triple shift (16-24 hours/day) 2 x rate. • P.M. service additional.

• Customer responsible for blade damage.

www.iltruck.com24

MAKE MODEL SPECS WEEK 4 WEEK

Ford F450/F550 11 ft. Contractor Box $750 $2,250Tandem Axle 15 ft.-16 yds. $1,925 $5,750Tri-Axle 16 ft.-21 yds. $2,000 $6,000International 7400SF 14 ft. Contractor Box, 4x4 $1,850 $5,500

ON ROAD DUMP TRUCKS

Peterbilt 348 Tandem

Kenworth T370 Tandem

Ford 750 Crew Cab

• All On Road Vehicles subject to maximum monthly mileage allowance. Per mile fee and maximum allowance based on vehicle type. Lessee is responsible for tire repair and routine maintenance at manufacturer's suggested intervals.

TRUCKS: Dump, Water, Flatbed & Semis

International 7400SF Dump

Peterbilt 348 Tandem Flatbed




MAKE WEEK 4 WEEK

Tandem Axle Day Cab $1,500 $4,500Tri-Axle Day Cab $1,650 $4,950Tandem Axle 6x6 $2,250 $6,750

SEMI TRUCKS

Kenworth T800

MAKE MODEL DESCRIPTION WEEK 4 WEEK

Ford F750 14-16 ft. $1,200 $3,600Ford F750 14-16 ft. Crew Cab $1,425 $4,250Peterbilt 348 14 ft. Tandem, 4x4 $1,850 $5,500Peterbilt 348 18 ft. Tandem, 6x6 $2,100 $6,250

ON ROAD FLATBED TRUCKS


International 4300 2,000 gal. Single Axle $1,175 $3,500Peterbilt 348 4,000 gal. Tandem Axle $1,650 $4,950Water Cannon $200 $500

ON ROAD WATER TRUCKS

MackGU713 Tri-Axle



TRAILERS: Semi & Tag

MAKE SPECS WEEK 4 WEEK

Dorsey 35-48 ft. Flatbed $425 $1,250Dorsey 48 ft. Step Deck $585 $1,750Magnolia CPT67 Pipe Trailer $1,000 $3,000Talbert 55 Ton RGN $1,500 $4,500Talbert Flip 4th Axle for RGN $250 $750

SEMI TRAILERS

• All Trailers brake & tire wear to be assessed.


Redi Haul ML7470S 6,500 lb. cap. Tilt Deck $200 $600Redi Haul R2028TBIT-HD 12,500 lb. cap. Tilt Deck $300 $900Redi Haul R2128PFE 13,400 lb. cap. $300 $900Interstate G20DT Gooseneck 20,000 lb. cap. $500 $1,500Interstate 40DLA 40,000 lb. cap. $650 $1,950Interstate 50DLA 50,000 lb. cap. $825 $2,475

TAG TRAILERS

Interstate 50DLA

Interstate G20DT Gooseneck

Talbert 55 Ton RGNRedi-Haul R2128PFE

Redi-Haul "Tilt" R2028TBIT

Dorsey FB48

Magnolia CPT67

Dorsey Step Deck

Interstate 40DLA

Redi-Haul "Tilt" ML7470S

Talbert Flip 4th Axle

www.iltruck.com26

• On-site assembly/disassembly fees apply.

MAKE MODEL CAPACITY DAY WEEK 4 WEEK

Toyota 8FGU25 5,000 Ib. $175 $525 $1,575Eaves E-225 22,000 Ib. $700 $2,100 $5,500 Hoist P360 36,000 Ib. $825 $2,500 $7,500

PNEUMATIC TIRE FORKLIFTS


Skytrak 8042 Trussboom 12 ft., Reach $60 $175 $500 Skytrak 10054 Trussboom 15 ft., Reach $70 $200 $550 Skytrak 96" Quick Attach Bucket $75 $225 $675Skytrak 12,000 lb. cap. Lift Hook $50 $150 $450

REACH & TELEHANDLER ATTACHMENTS

Toyota 8FGU25

MAKE MODEL CAPACITY / SPECS DAY WEEK 4 WEEK

Skytrak 8042 8,000 lb., 42 ft. Reach $350 $900 $2,500

Skytrak 10054 10,000 lb., 54 ft. Reach $450 $1,200 $3,600

JLG 1255 12,000 lb., 55 ft. Reach $500 $1,500 $4,500

JLG 1644 16,000 lb., 44 ft. Reach $675 $2,000 $6,000

REACH & TELEHANDLER FORKLIFTS

Skytrak 8042

Trussboom

Bucket

Hoist P360

Lift Hook

JLG 1255

JLG 1644

Skytrak 10054

FORKLIFTS


JLG 1930ES

JLG 450AJ


JLG 340AJ 34 ft. Articulating w/jib, DSL, 4wd $250 $550 $1,650JLG 450AJ 45 ft. Articulating w/jib, DSL, 4wd $250 $550 $1,650JLG 460SJ 46 ft. Telescoping w/6' jib, DSL, 4wd $250 $550 $1,650JLG 600AJ 60 ft. Articulating, DSL, 4wd $325 $775 $2,325JLG 660SJ 66 ft. Telescoping w/6' jib, DSL, 4wd $325 $775 $2,325JLG 660SJC 66 ft. Telescoping, DSL, Crawler $450 $1,200 $3,600JLG 800S 80 ft. Telescoping, DSL, 4wd $550 $1,500 $4,500JLG 800AJ 80 ft. Telescoping, Articulating, DSL, 4wd $550 $1,500 $4,500JLG 860SJ 86 ft. Telescoping w/6' jib, DSL, 4wd $550 $1,500 $4,500JLG 1350SJP 135 ft. Telescoping w/6' jib, DSL, 4wd $750 $2,250 $6,500JLG 1500SJP 150 ft. Telescoping DSL, 4wd $2,500 $6,000 $15,000

JLG MANLIFTS

• Sky Power Generators and Sky Welders available on most units.

JLG 260MRT

JLG 340AJ

JLG 430LRT

JLG 800AJ

JLG 1350SJP

JLG 660SJ

PLATFORM & MANLIFTS

JLG 660SJC


JLG 1930ES 19 ft. Platform Height $125 $250 $550JLG 2632ES 26 ft. Platform Height $150 $300 $700JLG 260MRT 26 ft. Platform, DSL, 4wd $250 $550 $1,650JLG 430LRT 43 ft. Platform Height $250 $550 $1,650

JLG PLATFORM LIFTS

JLG 2632ES

www.iltruck.com28


Laymor 300 8' Angle Broom $195 $540 $1,650Broce RCT350 8' Angle Broom

w/Blade$325 $975 $2,950

SWEEPERS

• Bristle wear charged at $125 per inch. • Blade wear charge additional.

SWEEPERS

Broce RCT350

Sweepmaster 300

Kubota 1140DMAKE MODEL DESCRIPTION DAY WEEK 4 WEEK

Kubota X1120 2 Passenger, DSL $150 $400 $1,200Mahindra Roxor 2 Passenger, DSL $150 $400 $1,200Kubota X1140 4 Passenger, DSL $175 $475 $1,400

UTILITY VEHICLES

UTILITY VEHICLES

Mahindra Roxor

Kubota 1120D


MAKE MODEL SPECS DESCRIPTION DAY WEEK 4 WEEK

Magnum MLT6S 6,000 kW Vert. Mast $125 $250 $500Power-Zone Auto Start Units Available

LIGHT PLANTS


Magnum MLT6S

LincolnVantage 400


Lincoln Vantage 400 400 amp, Towable $100 $250 $750Lincoln Vantage 300 300 amp, Towable $100 $250 $750Lincoln Classic 300D 300 amp, Towable $100 $250 $750

WELDERS

• Remote and leads available at additional cost.

HEATERS


Allmand Maxi-Heat MH500IQ

1,030,000 btu $500 $1,500 $4,500

25' Ducts $25 $75 $225Thermostat w/extension $25 $75 $225

HEATERS

Allmand MH500IQ


LincolnVantage 300

LIGHT PLANTS

WELDERS

www.iltruck.com30

MAKE MODEL TYPE DAY WEEK 4 WEEK

Multi-Quip MVC88VTHW Plate Compactor $55 $200 $500Multi-Quip MTX60H Jumping Jack $95 $275 $825Multi-Quip MVH408DZ Reversible Plate

Compactor$225 $795 $2,195

Multi-Quip RX157533 Articulating Trench Roller

$235 $700 $2,100

WALK BEHIND COMPACTORS

WALK BEHIND COMPACTORS


Magnum MMG55 48 kW, 3 Phase, DSL $150 $400 $1,650Magnum MMG75 86 kW, 3 Phase, DSL $200 $600 $1,800Magnum MMG100D 86 kW, 3 Phase, DSL $225 $650 $1,950Magnum MMG120 102 kW, 3 Phase, DSL $250 $750 $2,250Magnum MMG150D 127 kW, 3 Phase, DSL $300 $900 $2,700Magnum MMG185 177 kW, 3 Phase, DSL $365 $1,085 $3,250Magnum MMG235D 204 kW, 3 Phase, DSL $425 $1,250 $3,750Magnum MMG320 278 kW, 3 Phase, DSL $575 $1,650 $4,950

GENERATORS


GENERATORS

Magnum MMG55

Magnum MMG100

RX157533 Trench Roller

MVH408DZ Plate Compactor

MVH408DZ Reversible Plate Compactor

Jumping Jack MTX60H

Magnum MMG75

Magnum MMG235D


• A rental agreement must be signed, and account must be established prior to pick up or delivery.• Unless otherwise noted, rates are based on an 8 hour day, 40 hour week, & 176 hour month. Rates are based on time out not time used. Additional hours will be billed accordingly. • Rental charges will continue on equipment until Illinois Truck & Equipment has been notified that the equipment is ready to be picked up and off rent number is obtained.• All equipment is delivered with a full tank of fuel. If equipment is returned without a full tank, Lessee will be billed at $5.50 per gallon.• Lessee is responsible for daily maintenance, unusual wear and tear and any tire repairs.• Physical Damage & Liability Insurance is required from the Lessee for the equipment against damage, theft or vandalism. A certificate of insurance is needed in order to rent equipment.• Lessee will return equipment in a reasonably clean condition. • Lessee will be billed for excessive clean up at posted shop rates.• Lessee is responsible for all transportation charges. • Trucking Rates: 0-65,000 lbs. - @ $130/hr. 65,001 - 100,000 lbs. @ $140/hr. 100,001 - 120,000 lbs. @ $155/hr.NOTE: State and local permits are additional when required.• Prices are subject to change without notice. • All rentals are subject to availability. NOTE: $250 call out fee will be applied to any rental required outside normal business hours.

RENTAL GUIDELINES


I.R. P185 185 cfm @ 125 psi $125 $300 $750I.R. P185 w/Blast Pot 185 cfm @ 125 psi $200 $525 $1,575I.R. XP375 375 cfm @ 125 psi $150 $450 $1,350I.R. XP825 825 cfm @ 125 psi $385 $1,150 $3,450I.R. HP1600 1600 cfm @ 150 psi $585 $1,750 $5,250

AIR COMPRESSORS


Ingersoll Rand HP1600

Ingersoll RandP185 w/Blast Pot

Ingersoll Rand XP375

AIR COMPRESSORS

RENTALS

One Call Rents It All!

Locations

[email protected] [email protected] www.iltruck.com

815-941-1900Morris, Illinois 60450320 Briscoe Drive

Triadelphia, West Virginia 2605945 Robinson Drive

Washington, PA

Triadelphia, WV

I-70 I-70Exit 10

Wheeling, WV

I-79

Pittsburgh, PAI-7

9

1/2 Mile

Morris, Illinois Triadelphia, West Virginia

Chicago, IL

Gary, INMorris, ILDavenport, IA

Dwight, IL

Joliet, IL I-80

Lake Geneva, WIRockford, IL

I-80 Exit

Rt. 61/2 Mile

I-39

I-39

112

Rt.

47R

t. 47

I-55

I-55

rental guide - rentals, construction, heavy equipment, new ... · • rentals available nationwide...

Documents