EQUIPMENT REPAIRGE INSPECTION TECHNOLOGIES ONLY CANADIAN AUTHORIZED GE SERVICE CENTREUSM Go family / DMS Go family, DM5E USM 35 family, USM 36 family XL G3, XL Go, Mentor ViQ

Flaw Detectors Thickness Gauges Hardness Testers Eddy Current Equipment Film Processors

OXFORD INSTRUMENTSAUTHORIZED SERVICE CENTRE FOR OESOptical Emission Spectroscopy (OES) Equipment: ArcMet8000, PMI Master Pro, PMI Master Smart

INFINITEXSplitter & Ultra Models

SERVICESInstallation & Preventive Maintenance of Film Processors AGFA Film Processors NDT-M-ECO, NDT-U, NDT-SI, NOVA Film Processors Colenta Film Processors

Titan & Eresco X-Ray Equipment

OXFORD INSTRUMENTSFactory Trained on Optical Emission Spectroscopy Benchtop or Mobile Equipment In-House on On-Site Training Installation Full-Service Preventive Maintenance: Diagnostic, Cleaning, Parts Replacement

Experienced and trained service technicians ■ NDT Product Technical Service Technicians are

factory-trained

Scope of Services ■ Maintenance, repairs and calibrations ■ Installation, commissioning and training ■ On-site repair and calibration ■ Technical support via email or telephone

Repairs in Accordance to OEM & Nationally-Accepted Standards

■ The only GE Inspection Technology Authorized Service Centre in Canada

■ All calibration equipment and standards Fully NIST Traceable

CALIBRATIONULTRASONIC EQUIPMENT

■ Ultrasonic Equipment to ASTM E317 Standards ■ Thickness Gauges to ASTM E317 Standards ■ Hardness Testers, Rockwell, Brinell

OPTICAL EMISSION SPECTROMETER ■ PMI Master Pro, PMI Master Smart, ARCMet 8000 – FE, Al, Ni,

Co, Cu Alloys ■ Foundry Master Pro

OTHER TEST EQUIPMENT ■ Magnetic Feld Parallel Indicators ■ Gauss Meters ■ Pressure Gauges (up to 200 psi) ■ White Light Meters ■ Ultraviolet/ Black Light Meters ■ Stop-watches ■ Quick Break Testers ■ Refractometers ■ Densitometers ■ Radiometers ■ Survey Meters ■ Accumax XRP 3000 Sensors ■ Thermometer/Temperature Gauge (50°F - 120°F)

ONSITE CALIBRATION ■ Magnetic Particle Inspection (MPI) Benches ■ Drier Oven

TESTINGIN-USE SAMPLE TESTING

■ Fluorescent Brightness Using ASTM E1135 Method ASTM E1417 para 7.8.2.2

■ Water Content Using ASTM D95 Method ASTM E1417 para 7.8.2.4

■ Penetrant Sensitivity Using Tam Panel ASTM E1417 para 7.8.3.4

■ Penetrant Removability Using ASTM E1417 para 7.8.3.2 ■ Emulsifier Removability Using ASTM E1417 para 7.8.3.3 ■ Emulsifier Concentration (Hydrophilic) ASTM E1417

para 7.8.2.6 ■ Emulsifier Water Content (Lipophilic)

ASTM E1417 para 7.8.2.5 ■ MPI Oil Viscosity Using ASTM E1444

REPAIRS & SERVICES CALIBRATION & TESTING

C A L I B R AT I O N

O X F O R D I N S T R U M E N T S O E S E Q U I P M E N T

ARCMET, PMI MASTER PRO & SMART CALIBRATION (Fe Only) ADDITIONAL PROGRAMS (Sub-calibration for Ni, Cu, Al)

G E I T

ULTRASONIC THICKNESS GAUGES (Factory Cal): DM5E, DMS Go, DMS2, DM4FLAW DETECTORS (Factory Cal): USM Go, USM 35 Family, USM 36, USN 58, USN 60

HARDNESS TESTER (Factory Cal): MIC 10 and MIC 20

S P E C T R O N I C S

SPECTRONICS ACCUMAX XRP 3000 SPECTRONICS ACCUMAX XRP 3000 W/ LUMINANCE SENSOR

M I S C E L L A N E O U S N D T/ T E S T I N S T R U M E N T S

GENERAL THICKNESS GAUGES TO ASTM E317 MAGNETIC FIELD PARALLEL INDICATORS

DENSITOMETERS RADIOMETERS WITH 3 SENSORS (WHITE, BLACK, LUMINANCE)

RADIOMETERS WITH 2 SENSORS (WHITE, BLACK) ULTRAVIOLET/ BLACK LIGHT METERS

DIGITAL OR ANALOG WHITE LIGHT METERS STOP-WATCHES (DIGITAL)

REFRACTOMETERS PRESSURE GAUGES (UP TO 200 PSI)

DIGITAL GAUSS METERS MPI BENCH CALIBRATION

DRIER OVENS CALIBRATION QUICK BREAK TESTERS

GENERAL FLAW DETECTOR TO ASTM E317

S E R V I C E & R E P A I R L A B O U R

G E I T

GE IT RVI EQUIPMENT GE IT HARDNESS TESTERS

GE IT ULTRASONIC THICKNESS GAUGES GE IT XRAY: TITAN & ERESCO

GE IT ULTRASONIC FLAW DETECTORS GE IT FILM PROCESSORS, CR SCANNERS, DR PANELS

*Preventive Maintenance Service Plans available for GE IT Film Processors

O X F O R D I N S T R U M E N T S O E S E Q U I P M E N T

OXFORD: OES, XRF, LIBS OES PREVENTIVE MAINTENANCE:

O T H E R S E R V I C E & R E P A I R L A B O U R

OTHER IN-HOUSE LABOUR ADD: ON-SITE

OTHER ON-SITE LABOUR EMERGENCY

T E S T I N G 

In-Use Sample Testing For LPI/MPI

T R AV E L C O S T

ON-SITE WITHIN ONTARIO: ON-SITE OUTSIDE ONTARIO:

■ Services provided in our labs or your facility by our Qualified Technicians

■ Fully NIST traceable

■ All services performed in accordance with ISO 9001:2008

CALIBRATION SERVICE & REPAIR

Head Office 113-115 Cushman Road, Stes 22-23 St. Catharines, ON L2M 6S9 Phone: 905-934-5195

Edmonton Office 6137 80th Street, NW Edmonton, AB T6E 2W8 Phone: 780-399-6043

Email: sales@ndtproducts.ca www.ndtproducts.ca

SERVICES