research vessels - havforskningsinstituttet
TRANSCRIPT
RESEARCH VESSELSReflections and suggestions related to installation of hydroacoustic systems onboard research vessels with main focus on ice breakers
Full Picture Delivery
• Equipped to monitor the full Marine Ecosystemo Watercolumn, from surface to bottom with multibeams and
sonarso High Resolution multibeam bottom mappingo Sub-bottom mapping
• Launch and recovery of autonomous vehicles and various probeso HUGINo HIPAPo CTDo Core samplero Others…
• Demersal and Pelagic trawling
2. DEKK
PLATFO RM DEKK
1. DEKK
3. DEKK
4. DEKK
BRO DEKK
5. DEKK
Kronprins Haakon Scientific Icebreaker
An icebreaker is NOT an optimal platform for hydroacoustic systems!
The Beauty & The Beast
Main challenges:
• The bow shape is far from optimal to avoid bubble sweep down
• Heavy machinery might create vibrations adversely influencing the acoustic systems
• Blister or Gondola can not be used
The benefit of the bow design of FF Kronprins Haakon:
• The knife will push aerated water to the sides of the box keel
• The box keel gives additional draft to the vessel. Deeper is better!
• The box keel houses a number of acoustic systems that can be used while
sailing in ice conditions.
KONGSBERG PROPRIETARY – See Statement of Proprietary Information
/ 5 / 30-Sep-16
KONGSBERG PROPRIETARY – See Statement of Proprietary Information
/ 6 / 30-Sep-16
State-of-the-art platform for hydroacoustic systems, if no need for ice breaking capability
EM302 - 1 x 1 degree with ice protecting windowsSBP-302 - 6 degree with ice protecting windowEK80 - With six frequencies in arctic tanksSU90 - With gate valve for ice protectionSH90 - With gate valve for ice protectionTOPAS PS40 - With ice protecting window HiPAP 501 - With gate valve (standard)EA640 12Khz - In arctic tankDL850 - Navigation speed logEN250 – Navigational echosounder3rd party equipment: ADCP 38 kHz - With ice protecting windowADCP 150 kHz - With ice protecting window
Kronprins Haakon Scientific Icebreaker
Systems installed in the box keel:
Kronprins Haakon Scientific Icebreaker
Systems installed in the drop keels:MS70 - Side looking multibeam sonarME70 - Downward-looking multibeam sonarEK80 - With six frequenciesITI - Two hydrophonesEM710 - 1 x 1 multibeam echosounderMRU5 - In subsea bottleSubsea cameras - One in each drop keel, forward looking
3rd party equipment:ADCP 38 kHz - With acoustic windowADCP 150 kHz - With acoustic window SV probe - Mounted in tank inside dk
What to focus on when planning a scientific vessel?
• The shape of the bow design of the vessel, to avoid bubble sweep down• Use retractable azimuth thruster(S) with a bottom plate flush with the ships hull to avoid aeration
from tunnel thrusters. • Make a Gondola to house all large transducers (not valid for ice breakers).• Use drop keels for scientific echosounders and other sensitive acoustic systems. • Install hydrophones for trawl instrumentation, hydrophones for noise measurement and cameras
in the drop keels.• Design the vessel according to DNV Silent R or similar.• Avoid any sharp edges on the hull forward of the transducer installations• Dimensional survey of the transducers, MRU’s and the antennas is very important• Keep focus on EMC • Install the transceivers as close to the transducers as possible.• Install the computers in a separate room, not in the operation central. This is to avoid noise and
heat in operation room.• Use a KVM matrix system to limit number of monitors and ease the operation of the systems
installed• High quality steel work is important for the transducer installation.
Installation of SBP300 and EM302 casings
High quality steel work in process, on FF Kronprins Haakon last week
FF Kronprins Haakon
Result after milling the bottom part, the flange for the acoustic window and the foundation for the transducer mounting frame in the casing
KONGSBERG PROPRIETARY – See Statement of Proprietary Information
/ 13 / 30-Sep-16
Computers and monitors in the wheelhouse are integrated in the bridge and overhead consoles
Computers and KVM matrix system installed in IT room
Signal distribution box installed in IT room
KVM matrix system design made by Jan Bremnes (IMR). The KVM matrix is connected to the vessel infotainment system. Very clever solution!
G O SARS Scientific lab
1969: Simrad Omnidirectional Sonar, Scientific Echo Sounders and Computer (!)
/ 15 /14.october 2008
Kongsberg Maritime Video Wall
By combining vessel manoeuvring with fish finding equipment, winch systems, catch monitoring systems, underwater mapping systems and energy handling into one concept, the FISHMASTER® is a reality.
Concept for TRAWLER FISHMASTER®
WORLD CLASS – through people, technology and dedication / 17 /30-Sep-16
Integrated mode-based operation with decision support
Operational performance
Mode control
Transit
Shooting
Towing
Hauling
Boost
Seabed mapping
The different operational modes will give the operator the power and the flexibility needed to operate from one location with the important equipment in focus.
THE KM PROPOSAL FORRESEARCH VESSELS
/2016
8 techno
ogy and ded
cat
on
• Data collection– Water column mapping– Bottom mapping– Sub-bottom mapping
• Data Management • Scientific Sensor Carriers
– AUV’s– Bottom Landers– Autonomous Surface Vehicles
• Subsea Acoustic Positioning• Subsea Camera systems• Complete Handling solution• Position Reference Systems• Dynamic Positioning• Automation and smart
Power Management• Integrated Bridge Solutions
and Navigation Systems (FISHMASTER®)
Benefits by choosing KONGSBERGKONGSBERG IS “ALL OVER”
Coordinated operation of navigation, machinery and deck handling system for efficient marine operation
Energy-efficient handling of solutions and power production systems including storage and regeneration of energy
Synchronized world class sensors for observing and understanding the marine ecosystem
Seamless information distribution across on-board subsystems, cooperating vessels and on-shore facilities