BunkbedAssembly Instructions

Need assistance?Call: 0344 292 0000

Dimensions mm Length Width Height

Single 2039 1012 1500

Approximate time to assemble this product

Retain these instructions for future reference

2 x people recommended to assemble this product

Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings.

You will require a cross head screwdriver

Helpful advise before you begin:1. We suggest you spend a short time reading through this leaflet

and then follow the simple step by step instructions.2. If you follow the instructions carefully the end result should be

worth the effort.3. Do not discard any of the packaging until you have checked that

you have all the parts and the pack of fittings.4. Assemble this product on a carpet.5. To ensure an easier assembly, we strongly advise that all fittings

are only finger tightened during initial assembly. Only upon completion of the assembly should all fixing points be fully tightened.

6. We recommend a periodic check on all fixing points to make sure they remain fully tightened.

7. Keep glue and fittings out of children’s reach.8. Do not use any other tools other than those recommended to

build this product.9. Please do not use substitute parts. Use only additional or

replacement parts supplied by Dreams Ltd.10. In the unlikely event that this product has missing or damaged

parts, please call 0344 292 0000 to obtain spares.

Page 1 of 11

IMPORTANT: Read these instructionscarefully before attempting to assemble.Retain these instructions for futurereference.

IMPORTANT - READ CAREFULLY - RETAIN FOR FUTURE REFERENCE.

Page 2 of 11

Do not discard any of the packaging until you have checked that you have all the parts and the pack of fixings.

7 x 50mm Screw

Fittings Checklist

Parts Checklist

Ø6.3 x 100mm Bolt

x 4

x 16

Ø19 x 90mm Wood Dowel

Ø6.3 x 40mm Bolt

4 x 40mm Screw

Check size of fixings against this guage (dimensions in mm)

1 0 2 0 3 0 4 0 5 0 6 0 7 0 8 0 9 0 10 0 11 0

x 8

x 6

x 16

x 68

x 6

G

A

7 x 100mm Screw

x 6C

B

E H

I

J

Ø6.3 x 30mm Bolt

Half Round NutØ10 x 40mm Wood Dowel

x 12F

Upper Headboard (Left)

Upper Headboard (Right)

Lower Headboard x2pcs

Upper Front Side Rail

Upper Back Side Rail

Lower Front Side Rail

Lower Back Side Rail

Long Guardrail x2pcs

Short Guardrail x2pcs

Guardrail Support x2pcs

Ladder Side Rail (Left)

Ladder Side Rail (Right)

Ladder Step x4pcs

Complete Twin Slat x2sets

01

02

03

04

05

06

07

08

09

10

M4 Allen Key

x 1D

01

02

03

03

04

05

06

07

08

08

09

09

10

10

1112

13

13

13

13

14

14

11

12

14

13

Page 3 of 10

Bed Frame Assembly

1

x 4Ø6.3 x 100mm Bolt x 4Half Round Nut x 1M4 Allen KeyDA I

03

03

07

A

A

I

I

A

A

D I

I

Loosely tighten the Bolts 90%

Page 4 of 11

Bed Frame Assembly

2

x 4Ø6.3 x 100mm Bolt x 4Half Round NutA I

A

A

A

A

I

I

I

I

03

03

07

06

A

A

II

Loosely tighten the Bolts 90%

02

04

4

AA

A

A

I

I A

Ax 4Ø6.3 x 100mm Bolt x 4Half Round NutA I

I

I

x 47 x 100mm Screw x 8Ø10 x 40mmWood DowelFC

3

Loosely tighten the Screws and Bolts90%

C

F

F

08

02

01C

C

C C

AA

I A

A

08 05

I

Bed Frame Assembly

x 4Ø6.3 x 100mm Bolt x 4Half Round NutA I

I

I

Page 5 of 11

01

Counterbore hole

Loosely tighten the Bolts 90%

F

Page 6 of 11

Bed Frame Assembly

5

x 4Ø19 x 90mmWood Dowel

B

B

B

B

B

Counterbore hole

01

02

03

03

06

07

Bolt hole

Page 7 of 11

Bed Frame Assembly

6

7

x 8

x 4

7 x 50mm ScrewG

Ø6.3 x 40mm BoltE

E

11

12

13

13

13

13

G

G

G

G

G

GG

G

EE

EE

Fully tighten the Screws

Loosely tighten the Bolts 90%

Page 8 of 11

Bed Frame Assembly

8

9

x 4Ø10 x 40mmWood DowelF

x 27 x 100mm ScrewC x 2Ø6.3 x 40mm BoltE

F

F

C

E

09

09

Bolt hole

E

E

Loosely tighten the Bolts 90%

Page 9 of 11

Sprung Slat System Assembly

10

11

x 6Ø6.3 x 30mm BoltH

H

10

10

14

14

Counterbore hole

Fully tighten all Bolts and Screws at this step.

Page 10 of 11

Sprung Slat System Assembly

12

Important Note:Before you use the unit, Pleasechoose the right mattress on it.Underneath the mark is the safesize you could choice.Mattress size: 90cm x 190cm

Note:• Do not stand on the bed before placing the mattress.• Assemble on a smooth flat surface.• Children can become trapped between the bed and the wall.To avoid risk of serious injury the distance between the top safety barrier and the wall shall not exceed 75mm or shall be more than 230mm.Upper bed of bunk bed is not suitable for children

under six year due to the risk of injury from falls.• Children can strangle in items such as ropes, strings, cords, harnesses and belts attached to or hung on a bunk bed.• Maximum mattress depth for top bunk is 175mm. • This product complies with European Standard BS EN 747-1:2012+A1:2015 & 747-2:2012 + A1:2015

Important Note:Take care of your children.young children may easy fallfrom the upper bunk sticker.

•

x 68

x 30

4 x 40mm ScrewJ

x 30x 4

J

J

J

09

14

Tighten the Screwswith a Phillips screwdriver (Not provided)

Check all the Bolts, screws/ parts and make sure all Fittings must be tightened properly, securely before use.

JJJJ

J

14

Page 11 of 11

Care of your Dreams FurnitureYour new bed from Dreams is more than a beautiful piece of furniture. It’s an investment in your health and wellbeing. Care for it well and you’ll enjoy a great night’s sleep for many years to come.

Should you have any issues with your product please contact our customer service team on 0344 292 0000

On DeliveryOnce your new bed is in place and all the packaging is removed, let it air for approximately 1 hour before putting on your mattress, mattress protector and bed linen.Don’t worry if your bed feels a little strange at first. It takes time for your body to adjust to a new level of support and comfort. You’ll soon be enjoying a more relaxed sleep. Please consider the surface your bed will be stood on. If your bed frame is to be stood on an uncarpeted surface please ensure that you use rubber backed mat under the legs to avoid slipping.

Day to day CarePlease use only 5% soap, 95% water solution, wiping with a damp cloth. Finally dry with a soft clean cloth. Dust with a soft clean cloth only.Check all bolts, screws and legs regularly to make sure they haven’t loosened and tighten all joins of your furniture or bedstead after 6 months. Please keep these instructions in a safe place for further use. Storage Drawers in Bedsteads are designed to carry lightweight items such as Pillows, duvets and linen. Please try to avoid storing heavier items such as books or toys.

ReturnsIf you have bought a large item such as a bed or mattress which is damaged or faulty and would like to return it, we will be able to arrive at your home and take your item away. All we ask is that your item is in perfect condition and in its original packaging (you can open the packaging to inspect your item). Items will not be able to be returned if they are not in their original packaging.For online and telesales orders, you can only return an item within 14 days from the date of your delivery.

Dreams reserve the right to modify products, dimensions, parts and fixings whithout notifications.

www.dreams.co.uk

Thank you for purchasing from

Need assistance?Call: 0344 292 0000