RF-MFX720 Module series — — multi-protocol spectrum system （ MTSS-Mul ），

specialized for upgrading traditional high-end traismitters

Product Overview： ‘MTSS-Mul’, a 2.4G spectrum transmitting system based on brand-new ‘ONE TO

ALL’ designing idea---supporting DSM2, DEVO and J6Pro at the same time;

Specialized in traditional high-end transmitters upgrades, e.g. JR 9XII，FUTABA T9C，

FUTABA 10CHP and Hitec AURORA-9（directly fixed）；

Supporting FS-TH9X-B and Hobbying 9XR（directly fixed）；

Supporting transmitters with changeable modules like W-fly;

Supporting HorizonHobby’s products with DSM2 or compatible receivers, e.g.

McpxV1&V2,130-X,MSR-X and UMX；

Supporting Walkera’s Super CP，Mini CP，V120D02S，Master CP and quadrocopters；

Supproting nineeagle’s SOLOPRO 125，SOLOPRO 180D， Solo Pro 319 and any models

that can be controlled by J6 transmitters；

Technical Features: Maximum transmitting power：20Bm；

Channels：9CH（DSM2），8CH（DEVO），6CH（J6Pro）；

Working voltage：5~12V；

Working current：100mA；

MTSS-Mul modes and supported receivers

Before opening the transmitter, please select MTSS-Mul mode as following:

MTSS-Mul-A mode（DSM2）：F1+A；

Supported receivers/ models：HorizonHobby’s such as McpxV1&V2、130-X、

MSR-X and UMX；

MTSS-Mul-B mode（DEVO）：F1+B；

Supported receivers/ models： Walkera’s Super CP，Mini CP，V120D02S，Master

CP and quadrocopters; MTSS-Mul-C mode（J6Pro）：F1+C；

Supported receivers/ models：nineeagle’s SOLOPRO 125，SOLOPRO 180D， Solo

Pro 319 and any models that can be controlled by J6 transmitters

Binding Steps MTSS-Mul-A mode（DSM2）：

1) First enter a DSM2 receiver into binding mode, then hold the binding button before

opening the transmitter. Release the binding button after opening the transmitter

and the LED on the module will flash；

2) Binding is finished when the LED keeps on；

3) If the transmitter could control the receiver, the binding operation succeeds or

repeat the binding operation from step 1.

MTSS-Mul-B mode（DEVO）：

1) Power on a DEVO receiver and then open the transmitter, after that the LED on the

module will flash；

2) When the LED on the receiver or something other(as the receiver’s instructions say)

indicates finishing binding, move the rudder/aileron stick to quit binding.

MTSS-Mul-C mode（J6Pro）：

1) First enter a J6Pro receiver into binding mode, then hold the binding button before

opening the transmitter. Release the binding button after opening the transmitter

and the LED on the module will flash；

2) Binding is finished when the LED keeps on.

PS：MTSS-Mul-A mode（DSM2） and MTSS-Mul-C mode（J6Pro） need binding only

once；MTSS-Mul-B mode（DEVO） needs binding every time when opening the

transmitter(as the protocol requires) .

Supported Transmitters: RF-MFX72-F/H supprots：FUTABA T9C，FUTABA 10CHP， Hitec AURORA-9, etc.

RF-MFX72-JR supports ：JR 9XII，FS-TH9X-B, Hobbying 9XR, etc.