rittling cabinet unit heater submittal data · 19 hours ago · 8 1/8" 2" t p 12...
TRANSCRIPT
Revised June 2018. Zehnder periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder's Sales Support staff at 844-934-6337 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Revised June 1, 2018. Zehnder Rittling periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder Rittling's Sales Support staff at 716-827-6510 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder Rittling in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Zehnder Rittling · 100 Rittling Blvd. · Buffalo, NY USA 14220 T 716-827-6510 · F 716-218-2805 · [email protected] · www.zehnder-rittling.com© Zehnder Rittling June 2018, English, subject to change without notice
8 1
/8"
2"
T
P
N
R
12
13/1
6"
7 1/8"
M K
7 1/8"
2"
16
1/8"
J
L
20
13/1
6"
6 1/2"
16"
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RFI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
RF-200shown
RF-220shown
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
1 row hotwater supply
and 1 row steam supply
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RF
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
A
6"
3 1
/2"
3"
26
1/2"
Models RF and RFIDimensions and data
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
* Add 6" per extended end selection. See chart for details.
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
8 1
/8"
2"
T
P
N
R
12
13/1
6"
7 1/8"
M K
7 1/8"
2"
16
1/8"
J
L
20
13/1
6"
6 1/2"
16"
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RFI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
RF-200shown
RF-220shown
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
1 row hotwater supply
and 1 row steam supply
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RF
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
A
6"
3 1
/2"
3"
26
1/2"
Models RF and RFIDimensions and data
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
* Add 6" per extended end selection. See chart for details.
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
Dimensions and data Models RF and RFI
Dimensional data
Unit sizeA
B C DStd. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes�� Inlet grill optional�� Unit shown with left hand piping connections and right hand electrical connections as standard�� Right hand piping connections with left hand electrical connections available as an option�� Piping hand determined when facing the air outlet�� All listed dimensions are approximate and are subject to change without notice�� Modifications to the product specifications must be accepted by Zehnder at its base office�� See www.zehnder-rittling.com for any recent updates or changes
Revised June 1, 2018. Zehnder Rittling periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder Rittling's Sales Support staff at 716-827-6510 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder Rittling in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Zehnder Rittling · 100 Rittling Blvd. · Buffalo, NY USA 14220 T 716-827-6510 · F 716-218-2805 · [email protected] · www.zehnder-rittling.com© Zehnder Rittling June 2018, English, subject to change without notice
8 1
/8"
2"
T
P
N
R
12
13/1
6"
7 1/8"
M K
7 1/8"
2"
16
1/8"
J
L
20
13/1
6"
6 1/2"
16"
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RFI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
RF-200shown
RF-220shown
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
1 row hotwater supply
and 1 row steam supply
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RF
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
A
6"
3 1
/2"
3"
26
1/2"
Models RF and RFIDimensions and data
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
* Add 6" per extended end selection. See chart for details.
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
8 1
/8"
2"
T
P
N
R
12
13/1
6"
7 1/8"
M K
7 1/8"
2"
16
1/8"
J
L
20
13/1
6"
6 1/2"
16"
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RFI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
RF-200shown
RF-220shown
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
1 row hotwater supply
and 1 row steam supply
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RF
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
A
6"
3 1
/2"
3"
26
1/2"
Models RF and RFIDimensions and data
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
* Add 6" per extended end selection. See chart for details.
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
Dimensions and data Models RF and RFI
Dimensional data
Unit sizeA
B C DStd. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes�� Inlet grill optional�� Unit shown with left hand piping connections and right hand electrical connections as standard�� Right hand piping connections with left hand electrical connections available as an option�� Piping hand determined when facing the air outlet�� All listed dimensions are approximate and are subject to change without notice�� Modifications to the product specifications must be accepted by Zehnder at its base office�� See www.zehnder-rittling.com for any recent updates or changes
Dimensions and data Models RF and RFI
Dimensional data
Unit sizeA
B C DStd. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes� Inlet grill optional� Unit shown with left hand piping connections and right hand electrical connections as standard� Right hand piping connections with left hand electrical connections available as an option� Piping hand determined when facing the air outlet� All listed dimensions are approximate and are subject to change without notice� Modifications to the product specifications must be accepted by Zehnder at its base office� See www.zehnder-rittling.com for any recent updates or changes
Coil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/16
3 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
4 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Revised June 2018. Zehnder periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder's Sales Support staff at 844-934-6337 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Dimensions and data Models RS and RSI
Dimensional data
Unit sizeA
B C DStd. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes� Inlet grill optional� Unit shown with left hand piping connections and right hand electrical connections as standard� Right hand piping connections with left hand electrical connections available as an option� Piping hand determined when facing the air outlet� All listed dimensions are approximate and are subject to change without notice� Modifications to the product specifications must be accepted by Zehnder at its base office� See www.zehnder-rittling.com for any recent updates or changes
Revised June 1, 2018. Zehnder Rittling periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder Rittling's Sales Support staff at 716-827-6510 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder Rittling in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Zehnder Rittling · 100 Rittling Blvd. · Buffalo, NY USA 14220 T 716-827-6510 · F 716-218-2805 · [email protected] · www.zehnder-rittling.com© Zehnder Rittling June 2018, English, subject to change without notice
M K
7 1/8"
2"
16
1/8"
J
L
2
0 13
/16"
8
1/8
"
2"
T
P
N
R
12
13/1
6"
7 1/8"
6 1/2"
16"
1 row hotwater supply
steam supplyand 1 row
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RS
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
3 1
/2" 2
9 1/
4"
A
Models RS and RSIDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
water return2, 3 & 4 row hot
1 row hot
steam supply
water supply
2, 3 & 4 row hot
Side view: Model RSI
steam returnand 1 row
water supply
1 row hotwater returnand 1 row
Filter position
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
M K
7 1/8"
2"
16
1/8"
J
L
2
0 13
/16"
8
1/8
"
2"
T
P
N
R
12
13/1
6"
7 1/8"
6 1/2"
16"
1 row hotwater supply
steam supplyand 1 row
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RS
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
3 1
/2" 2
9 1/
4"
A
Models RS and RSIDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
water return2, 3 & 4 row hot
1 row hot
steam supply
water supply
2, 3 & 4 row hot
Side view: Model RSI
steam returnand 1 row
water supply
1 row hotwater returnand 1 row
Filter position
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
Dimensions and data Models RS and RSI
Dimensional data
Unit sizeA
B C DStd. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes�� Inlet grill optional�� Unit shown with left hand piping connections and right hand electrical connections as standard�� Right hand piping connections with left hand electrical connections available as an option�� Piping hand determined when facing the air outlet�� All listed dimensions are approximate and are subject to change without notice�� Modifications to the product specifications must be accepted by Zehnder at its base office�� See www.zehnder-rittling.com for any recent updates or changes
RS-200
shown
Revised June 1, 2018. Zehnder Rittling periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder Rittling's Sales Support staff at 716-827-6510 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder Rittling in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Zehnder Rittling · 100 Rittling Blvd. · Buffalo, NY USA 14220 T 716-827-6510 · F 716-218-2805 · [email protected] · www.zehnder-rittling.com© Zehnder Rittling June 2018, English, subject to change without notice
M K
7 1/8"
2"
16
1/8"
J
L
2
0 13
/16"
8
1/8
"
2"
T
P
N
R
12
13/1
6"
7 1/8"
6 1/2"
16"
1 row hotwater supply
steam supplyand 1 row
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RS
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
3 1
/2" 2
9 1/
4"
A
Models RS and RSIDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
water return2, 3 & 4 row hot
1 row hot
steam supply
water supply
2, 3 & 4 row hot
Side view: Model RSI
steam returnand 1 row
water supply
1 row hotwater returnand 1 row
Filter position
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
M K
7 1/8"
2"
16
1/8"
J
L
2
0 13
/16"
8
1/8
"
2"
T
P
N
R
12
13/1
6"
7 1/8"
6 1/2"
16"
1 row hotwater supply
steam supplyand 1 row
steam returnand 1 row
2, 3 & 4 row hotwater return
Side view: Model RS
positionFilter
1 row hotwater return
2, 3 & 4 row hotwater supply
Front view(Front outlet)
3 1
/2" 2
9 1/
4"
A
Models RS and RSIDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/163 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/164 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
water return2, 3 & 4 row hot
1 row hot
steam supply
water supply
2, 3 & 4 row hot
Side view: Model RSI
steam returnand 1 row
water supply
1 row hotwater returnand 1 row
Filter position
(top outlet)
access section
Top view
Fan speedsectionPiping access
Outlet opening centered
6"
D
10"
mounting slot3/8" wd. x 1" lg.
(4 places)
Note: Inlet grille optionalElectricalend pocket
Front view(less front panel)
* 8" B * 8"
C
Dimensions and data Models RS and RSI
Dimensional data
Unit sizeA
B C DStd. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes�� Inlet grill optional�� Unit shown with left hand piping connections and right hand electrical connections as standard�� Right hand piping connections with left hand electrical connections available as an option�� Piping hand determined when facing the air outlet�� All listed dimensions are approximate and are subject to change without notice�� Modifications to the product specifications must be accepted by Zehnder at its base office�� See www.zehnder-rittling.com for any recent updates or changes
RS-200
shown
Coil J K L M N P R T
2 Row 18-1/4 4-7/16 19-1/16 5-3/16 9-7/8 5-3/16 10-11/16 4-7/16
3 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
4 Row 19-1/16 3-1/16 20-3/8 4-13/16 8-9/16 4-13/16 9-7/8 3-1/16
Revised June 2018. Zehnder periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder's Sales Support staff at 844-934-6337 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Dimensions and data Model RW, RWI and RC
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes� Inlet grill optional� Unit shown with left hand piping connections and right hand electrical connections as standard� Right hand piping connections with left hand electrical connections available as an option� Piping hand determined when facing the air outlet� All listed dimensions are approximate and are subject to change without notice� Modifications to the product specifications must be accepted by Zehnder at its base office� See www.zehnder-rittling.com for any recent updates or changes
Dimensional data
Unit sizeA
B CLouvers Ducted opening
Std. 6" Ext. 6" Ext. x2 D E F G
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20 6 18-3/8 5-1/8
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26 6 24-3/16 5-1/8
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32 6 30-3/16 5-1/8
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44 6 42-3/16 5-1/8
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50 6 48-3/16 5-1/8
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58 6 56-3/16 5-1/8
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68 6 66-3/16 5-1/8
Revised June 1, 2018. Zehnder Rittling periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder Rittling's Sales Support staff at 716-827-6510 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder Rittling in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Zehnder Rittling · 100 Rittling Blvd. · Buffalo, NY USA 14220 T 716-827-6510 · F 716-218-2805 · [email protected] · www.zehnder-rittling.com© Zehnder Rittling June 2018, English, subject to change without notice
4"
16"
M K
7 1/8"
2"
J
L
18
3/8"
13
5/8"
2"
T
P
N
R
7 1/8"
5 5
/8"
10
3/8"
3/8" wd. x 1" lg.
(4 places) mounting slot
Electricalend pocket
Front view(less front panel)
C
* 8" B * 8"
(top outlet)
Piping access
Top view
section
Outlet opening centered
Fan speedaccess section
6"
D
10"
RW-280shown
Models RW, RWI and RCDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/163 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/164 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
RC-360shown
1 row hotwater supply
Filterpositions
and 1 row steam supply
and 1 row steam return
Side view: Model RW and RC
2, 3 & 4 row hotwater return
1 row hotwater return
2, 3 & 4 row hotwater supply
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RWI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
Front view(Front outlet)
6"
24"
A 3"
2 3/8"
6"
4"
16"
M K
7 1/8"
2"
J
L
18
3/8"
13
5/8"
2"
T
P
N
R
7 1/8"
5 5
/8"
10
3/8"
3/8" wd. x 1" lg.
(4 places) mounting slot
Electricalend pocket
Front view(less front panel)
C
* 8" B * 8"
(top outlet)
Piping access
Top view
section
Outlet opening centered
Fan speedaccess section
6"
D
10"
RW-280shown
Models RW, RWI and RCDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/163 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/164 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
RC-360shown
1 row hotwater supply
Filterpositions
and 1 row steam supply
and 1 row steam return
Side view: Model RW and RC
2, 3 & 4 row hotwater return
1 row hotwater return
2, 3 & 4 row hotwater supply
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RWI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
Front view(Front outlet)
6"
24"
A 3"
2 3/8"
6"
Dimensions and data Model RW, RWI and RC
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes�� Inlet grill optional�� Unit shown with left hand piping connections and right hand electrical connections as standard�� Right hand piping connections with left hand electrical connections available as an option�� Piping hand determined when facing the air outlet�� All listed dimensions are approximate and are subject to change without notice�� Modifications to the product specifications must be accepted by Zehnder at its base office�� See www.zehnder-rittling.com for any recent updates or changes
Dimensional data
Unit sizeA
B CLouvers Ducted opening
Std. 6" Ext. 6" Ext. x2 D E F G
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20 6 18-3/8 5-1/8
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26 6 24-3/16 5-1/8
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32 6 30-3/16 5-1/8
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44 6 42-3/16 5-1/8
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50 6 48-3/16 5-1/8
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58 6 56-3/16 5-1/8
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68 6 66-3/16 5-1/8
Revised June 1, 2018. Zehnder Rittling periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder Rittling's Sales Support staff at 716-827-6510 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder Rittling in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Zehnder Rittling · 100 Rittling Blvd. · Buffalo, NY USA 14220 T 716-827-6510 · F 716-218-2805 · [email protected] · www.zehnder-rittling.com© Zehnder Rittling June 2018, English, subject to change without notice
4"
16"
M K
7 1/8"
2"
J
L
18
3/8"
13
5/8"
2"
T
P
N
R
7 1/8"
5 5
/8"
10
3/8"
3/8" wd. x 1" lg.
(4 places) mounting slot
Electricalend pocket
Front view(less front panel)
C
* 8" B * 8"
(top outlet)
Piping access
Top view
section
Outlet opening centered
Fan speedaccess section
6"
D
10"
RW-280shown
Models RW, RWI and RCDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/163 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/164 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
RC-360shown
1 row hotwater supply
Filterpositions
and 1 row steam supply
and 1 row steam return
Side view: Model RW and RC
2, 3 & 4 row hotwater return
1 row hotwater return
2, 3 & 4 row hotwater supply
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RWI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
Front view(Front outlet)
6"
24"
A 3"
2 3/8"
6"
4"
16"
M K
7 1/8"
2"
J
L
18
3/8"
13
5/8"
2"
T
P
N
R
7 1/8"
5 5
/8"
10
3/8"
3/8" wd. x 1" lg.
(4 places) mounting slot
Electricalend pocket
Front view(less front panel)
C
* 8" B * 8"
(top outlet)
Piping access
Top view
section
Outlet opening centered
Fan speedaccess section
6"
D
10"
RW-280shown
Models RW, RWI and RCDimensions and data
Dimensional dataCoil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/163 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/164 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
Dimensional data
Unit size A B C DStd. 6" Ext02 38-3/16 44-3/16 22-3/16 23-5/8 2003 44-3/16 50-3/16 28-3/16 29-5/8 2604 50-3/16 56-3/16 34-3/16 35-5/8 3206 62-3/16 68-3/16 46-3/16 47-5/8 4408 68-3/16 74-3/16 52-3/16 53-5/8 5010 76-3/16 82-3/16 60-3/16 61-5/8 5812 86-3/16 92-3/16 70-3/16 71-5/8 68
* Add 6" per extended end selection. See chart for details.
RC-360shown
1 row hotwater supply
Filterpositions
and 1 row steam supply
and 1 row steam return
Side view: Model RW and RC
2, 3 & 4 row hotwater return
1 row hotwater return
2, 3 & 4 row hotwater supply
2, 3 & 4 row hot
water supply
water return
1 row hot
and 1 row water return
Side view: Model RWI
steam supply
steam returnand 1 row
water supply2, 3 & 4 row hot
1 row hot
Filter positions
Front view(Front outlet)
6"
24"
A 3"
2 3/8"
6"
Dimensions and data Model RW, RWI and RC
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes�� Inlet grill optional�� Unit shown with left hand piping connections and right hand electrical connections as standard�� Right hand piping connections with left hand electrical connections available as an option�� Piping hand determined when facing the air outlet�� All listed dimensions are approximate and are subject to change without notice�� Modifications to the product specifications must be accepted by Zehnder at its base office�� See www.zehnder-rittling.com for any recent updates or changes
Dimensional data
Unit sizeA
B CLouvers Ducted opening
Std. 6" Ext. 6" Ext. x2 D E F G
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20 6 18-3/8 5-1/8
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26 6 24-3/16 5-1/8
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32 6 30-3/16 5-1/8
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44 6 42-3/16 5-1/8
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50 6 48-3/16 5-1/8
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58 6 56-3/16 5-1/8
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68 6 66-3/16 5-1/8
Coil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/16
3 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 4-13/16 3-1/16
4 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 4-13/16 3-1/16
Revised June 2018. Zehnder periodically makes changes to the design and/or specifications of its products. As a result, the design and specifications of each product at the time of order may be different than as described herein. Please contact Zehnder's Sales Support staff at 844-934-6337 for specific information on current design and specifications. Designs, specifications and other information contained herein are not express warranties, which are only as expressly set forth by Zehnder in its terms and conditions of sale. The latest version of this document is available at www.zehnder-rittling.com.
Rittling Cabinet Unit HeaterSubmittal Data
Dimensional data
Unit size
AB C
Louvers Duct opening H
Std. 6" Ext. 6" Ext. x2 D E F G Std. 6" Ext. 6" Ext. x2
02 38-3/16 44-3/16 50-3/16 22-3/16 24 20 6 18-3/8 5-1/8 41-3/16 47-3/16 53-3/16
03 44-3/16 50-3/16 56-3/16 28-3/16 30 26 6 24-3/16 5-1/8 47-3/16 53-3/16 59-3/16
04 50-3/16 56-3/16 62-3/16 34-3/16 36 32 6 30-3/16 5-1/8 53-3/16 59-3/16 65-3/16
06 62-3/16 68-3/16 74-3/16 46-3/16 48 44 6 42-3/16 5-1/8 65-3/16 71-3/16 77-3/16
08 68-3/16 74-3/16 80-3/16 52-3/16 54 50 6 48-3/16 5-1/8 71-3/16 77-3/16 83-3/16
10 76-3/16 82-3/16 88-3/16 60-3/16 62 58 6 56-3/16 5-1/8 79-3/16 85-3/16 91-3/16
12 86-3/16 92-3/16 98-3/16 70-3/16 72 68 6 66-3/16 5-1/8 89-3/16 95-3/16 101-3/16
Dimensions and data Models RRW, RFRW, RRC, RFRC, RRWI & RFRWI
Notes: � 1 and 2 row coil supply and return 1/2" nominal (5/8" OD) all sizes� Unit shown with left hand piping connections and right hand electrical connections as standard� Right hand piping connections with left hand electrical connections available as an option� Piping hand determined when facing the air outlet� All listed dimensions are approximate and are subject to change without notice� Modifications to the product specifications must be accepted by Zehnder at its base office� See www.zehnder-rittling.com for any recent updates or changes
4"
16"
2"
T
P
N
R
7 1/8"
5 5
/8"
10
3/8"
M K
7 1/8"
2"
J
L
18
3/8"
13
5/8"
3/8" wd. x 1" lg.
(4 places) mounting slot
Electricalend pocket
Front view(less front panel)
C
* 8" B * 8"
RFRC-410shown
Front view(Front outlet)
6"
A + 3"
24"
3"
6"
A
2 3/8"
27"
1 row hot
2, 3 & 4 row hot
water supply2, 3 & 4 row hot
steam supply
water supplyand 1 row steam return
Side view: Model RRWI and RFRWI
water return
1 row hotwater returnand 1 row
Filter position
RFRW-340shown
Top view
Piping
(top outlet)
Outlet opening centered
sectionFan speedsection D or F
10"
E or G
1 row hotwater supply
Filterpositions
and 1 row steam supply
and 1 row steam return
Side view: Model RRW, RFRW, RRC and RFRC
2, 3 & 4 row hotwater return
1 row hotwater return
2, 3 & 4 row hotwater supply
Models RRW, RFRW, RRC,RFRC, RRWI and RFRWI
Dimensions and data
Dimensional dataUnit size
A B C Louvers Duct openingStd. 6" Ext. D E F G
02 38-3/16 44-3/16 22-3/16 23-5/8 20 6 18-3/16 5-1/803 44-3/16 50-3/16 28-3/16 29-5/8 26 6 24-3/16 5-1/804 50-3/16 56-3/16 34-3/16 35-5/8 32 6 30-3/16 5-1/806 62-3/16 68-3/16 46-3/16 47-5/8 44 6 42-3/16 5-1/808 68-3/16 74-3/16 52-3/16 53-5/8 50 6 48-3/16 5-1/810 76-3/16 82-3/16 60-3/16 61-5/8 58 6 56-3/16 5-1/812 86-3/16 92-3/16 70-3/16 71-5/8 68 6 66-3/16 5-1/8
Dimensional dataCoil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/163 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/164 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A" and "H".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
* Add 6" per extended end selection. See chart for details.* Add 6" per extended end selection. See chart for details.
Dimensional dataUnit size
A B C Louvers Duct openingStd. 6" Ext. D E F G
02 38-3/16 44-3/16 22-3/16 23-5/8 20 6 18-3/16 5-1/803 44-3/16 50-3/16 28-3/16 29-5/8 26 6 24-3/16 5-1/804 50-3/16 56-3/16 34-3/16 35-5/8 32 6 30-3/16 5-1/806 62-3/16 68-3/16 46-3/16 47-5/8 44 6 42-3/16 5-1/808 68-3/16 74-3/16 52-3/16 53-5/8 50 6 48-3/16 5-1/810 76-3/16 82-3/16 60-3/16 61-5/8 58 6 56-3/16 5-1/812 86-3/16 92-3/16 70-3/16 71-5/8 68 6 66-3/16 5-1/8
4"
16"
2"
T
P
N
R
7 1/8"
5 5
/8"
10
3/8"
M K
7 1/8"
2"
J
L
18
3/8"
13
5/8"
3/8" wd. x 1" lg.
(4 places) mounting slot
Electricalend pocket
Front view(less front panel)
C
* 8" B * 8"
RFRC-410shown
Front view(Front outlet)
6"
A + 3"
24"
3"
6"
A
2 3/8"
27"
1 row hot
2, 3 & 4 row hot
water supply2, 3 & 4 row hot
steam supply
water supplyand 1 row steam return
Side view: Model RRWI and RFRWI
water return
1 row hotwater returnand 1 row
Filter position
RFRW-340shown
Top view
Piping
(top outlet)
Outlet opening centered
sectionFan speedsection D or F
10"
E or G
1 row hotwater supply
Filterpositions
and 1 row steam supply
and 1 row steam return
Side view: Model RRW, RFRW, RRC and RFRC
2, 3 & 4 row hotwater return
1 row hotwater return
2, 3 & 4 row hotwater supply
Models RRW, RFRW, RRC,RFRC, RRWI and RFRWI
Dimensions and data
Dimensional dataUnit size
A B C Louvers Duct openingStd. 6" Ext. D E F G
02 38-3/16 44-3/16 22-3/16 23-5/8 20 6 18-3/16 5-1/803 44-3/16 50-3/16 28-3/16 29-5/8 26 6 24-3/16 5-1/804 50-3/16 56-3/16 34-3/16 35-5/8 32 6 30-3/16 5-1/806 62-3/16 68-3/16 46-3/16 47-5/8 44 6 42-3/16 5-1/808 68-3/16 74-3/16 52-3/16 53-5/8 50 6 48-3/16 5-1/810 76-3/16 82-3/16 60-3/16 61-5/8 58 6 56-3/16 5-1/812 86-3/16 92-3/16 70-3/16 71-5/8 68 6 66-3/16 5-1/8
Dimensional dataCoil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/163 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/164 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 7-7/16 3-1/16
Notes:- 1, 2, 3 and 4 row coil supply and return 1/2" nominal (5/8" OD) all sizes.- Left hand piping connections shown, right hand electrical as standard. Piping hand determined when facing the air outlet.- Unit length: for 6" extended end pocket add 6" to dimension "A" and "H".- All listed dimensions are approximate and are subject to change without notice. Modifications to the product specificstions must be acceptrd by Zehnder at its base office.
* Add 6" per extended end selection. See chart for details.* Add 6" per extended end selection. See chart for details.
Dimensional dataUnit size
A B C Louvers Duct openingStd. 6" Ext. D E F G
02 38-3/16 44-3/16 22-3/16 23-5/8 20 6 18-3/16 5-1/803 44-3/16 50-3/16 28-3/16 29-5/8 26 6 24-3/16 5-1/804 50-3/16 56-3/16 34-3/16 35-5/8 32 6 30-3/16 5-1/806 62-3/16 68-3/16 46-3/16 47-5/8 44 6 42-3/16 5-1/808 68-3/16 74-3/16 52-3/16 53-5/8 50 6 48-3/16 5-1/810 76-3/16 82-3/16 60-3/16 61-5/8 58 6 56-3/16 5-1/812 86-3/16 92-3/16 70-3/16 71-5/8 68 6 66-3/16 5-1/8
Coil J K L M N P R T
2 Row 15-3/4 4-7/16 16-9/16 5-3/16 7-7/16 5-3/16 8-1/4 4-7/16
3 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 4-13/16 3-1/16
4 Row 16-9/16 3-1/16 17-1/8 4-13/16 6-1/8 4-13/16 4-13/16 3-1/16