Use DHCP server

FD1103M1-EI

3 MP Intelligent IP outdoor fixed dome camera with IR

Quick Start Guide

© Siqura B.V. 2017 Version 1.1 (160707-1.1)

FD1103m1ei QSG (MW10)

Point the lens

Unpack Connect

Use fixed IP address

Insert Micro SD card / Reset

Note: Subject to modification. Actual product and accessories may differ in appearance.

*Reset button: Press and hold for 10 sec. when powering on or rebooting.

Warning: Restores factory default settings, including IP address, user name and password!

Note: Use Device Manager (see next) to discover the camera on the network. Note: For mounting instructions for pole mount or wall mount, see respective manuals.

1. Pan 2. Tilt 3. Rotate

RJ-45,

802.3af PoE

Use side conduit (optional)

1

2

3

Lock screw

12 Vdc / 24 Vac

DHCP

Network switchIP = 10.x.y.z

IP = 10.x.y.z

DHCP:

IP = 10.x.y.z

DHCP

Network switchIP = 192.168.1.x

IP = 192.168.1.x

DHCP:

30 s

2 ~ 253

Reset button*

Serial port

(debugging only) Micro SD/SDHC/SDXC

(up to 128 GB)

Find additional manuals, the datasheet,

the EU Declaration of Conformity and the

latest firmware for this product at:

http://www.tkhsecurity.com/support-files

http://www.tkhsecurity.com

http://www.tkhsecurity-usa.com

View live video

Adjust zoom/focus

Install Device Manager (optional)

Change IP address via Device Manager

Open web interface via Device Manager

Set password

3

2

1

1 2

Focus +

Focus -

Auxiliary focus (push to focus)

Zoom -

Zoom +

Important: 1103 series cameras require Device Manager version 1.8.1 or later. Replace an existing, older installation of this tool on your PC, if necessary.

1

2

3

Administrator / End User

Set a strong password!

qwerty1234

x6W@oM0a!9#F

Note: For information about user accounts and passwords, see User Manual.