Duplicate a Database Using RMAN in Oracle Database 11g Release 2

This article is an update of a previous Oracle 9i article.IntroductionBackup-Based DuplicationActive Database Duplication

Related articles.Direct NFS (DNFS) Clonedb in Oracle Database 11g Release 2 (Patchset 11.2.0.2)

Introduction

RMAN has the ability to duplicate, or clone, a database from a backup or from an active database. It is possible to create a duplicate database on a remote server with the same file structure, a remote server will a different file structure or the local server with a different file structure.

The article assumes the duplicate database is being created on a separate server, using the same SID (DB11G) and the same file structure as the source database. Explanations of several other scenarios are available here.

Backup-Based Duplication

Create a backup of the source database, if a suitable one doesn't already exist.$ rman target=/

RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;RMAN> BACKUP DATABASE PLUS ARCHIVELOG

All subsequent actions occur on the server running the duplicate database.

Create a password file for the duplicate instance.$ orapwd file=/u01/app/oracle/product/11.2.0/db_1/dbs/orapwDB11G password=password entries=10

Add the appropriate entries into the "tnsnames.ora" file in the "$ORACLE_HOME/network/admin" directory to allow connections to the target database from the duplicate server.# Added to the tnsnames.oraDB11G-SOURCE = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = ol5-112-dup1)(PORT = 1521)) ) (CONNECT_DATA = (ORACLE_SID = DB11G) ) )

Create a PFILE for the duplicate database. Since we are duplicating the database onto a separate server with the same filesystem as the original, we don't need to convert the file names. In this case, the PFILE is called "initDB11G.ora" and is placed in the "$ORACLE_HOME/dbs" directory.# Minimum Requirement.DB_NAME=DB11G

# Convert file names to allow for different directory structure if necessary.#DB_FILE_NAME_CONVERT='/u01/app/oracle/oradata/DB11G/','/u01/app/oracle/oradata/NEWSID/'#LOG_FILE_NAME_CONVERT='/u01/app/oracle/oradata/DB11G/','/u02/app/oracle/oradata

/NEWSID/'

We don't need all the other parameters as the clone will copy the SPFILE from the primary database. If you are duplicating a database on the same machine you will probably need to create a PFFILE/SPFILE manually from the primary database SPFILE, manually change the values and avoid the SPFILE clause in the duplicate command.

Create any directories necessary for start the duplicate database.$ mkdir -p /u01/app/oracle/oradata/DB11G$ mkdir -p /u01/app/oracle/fast_recovery_area/DB11G$ mkdir -p /u01/app/oracle/admin/DB11G/adump

Make the backup files from the source database available to the destination server. That can be done by either copying them to the matching location on the destination server, or placing them on a shared drive. If you are copying the files, you may want to use the following type of commands.$ scp -r oracle@ol5-112-dup1:/u01/app/oracle/fast_recovery_area/DB11G/archivelog /u01/app/oracle/fast_recovery_area/DB11G$ scp -r oracle@ol5-112-dup1:/u01/app/oracle/fast_recovery_area/DB11G/backupset /u01/app/oracle/fast_recovery_area/DB11G$ scp -r oracle@ol5-112-dup1:/u01/app/oracle/fast_recovery_area/DB11G/autobackup /u01/app/oracle/fast_recovery_area/DB11G

Connect to the duplicate instance.$ ORACLE_SID=DB11G; export ORACLE_SID$ sqlplus / as sysdba

Start the database in NOMOUNT mode.SQL> STARTUP NOMOUNT;

With the duplicate database started we can now connect to it from RMAN. For the duplication to work we must connect to the duplicate database (AUXILIARY), but depending on the type of duplication we are doing we may optionally connect to the original database (TARGET) and/or the recovery catalog (CATALOG).$ ORACLE_SID=DB11G; export ORACLE_SID

# No target or catalog. Metadata comes from backups.$ rman AUXILIARY /

# Target, but no catalog. Metadata comes from target database controlfile.$ rman TARGET sys/password@DB11G-SOURCE AUXILIARY /

# Catalog, but no target. Metadata comes from the RMAN catalog.$ rman CATALOG rman/password@rman-catalog AUXILIARY /

# Target and catalog. Metadata can come from the target controlfile or the catalog.$ rman TARGET sys/password@DB11G-SOURCE CATALOG rman/password@rman-catalog AUXILIARY /

We can then duplicate the database using one of the following commands. Remember, remove the SPFILE clause if you have manually created a full PFILE or SPFILE.# Backup files are in matching location to that on the source server.# Duplicate database to TARGET's current state.DUPLICATE TARGET DATABASE TO DB11G SPFILE NOFILENAMECHECK;

# Duplicate database to TARGET's state 4 days ago.

DUPLICATE TARGET DATABASE TO DB11G UNTIL TIME 'SYSDATE-4' SPFILE NOFILENAMECHECK;

# Backup files are in a different location to that on the source server.# Duplicate database to the most recent state possible using the provided backups.# Works with just an AUXILIARY connection only.DUPLICATE DATABASE TO DB11G SPFILE BACKUP LOCATION '/source/app/oracle/fast_recovery_area/DB11G' NOFILENAMECHECK;

# Do a point-in-time clone.DUPLICATE DATABASE TO DB11G SPFILE BACKUP LOCATION '/source/app/oracle/fast_recovery_area/DB11G' NOFILENAMECHECK UNTIL TIME "TO_DATE('2014-11-17 07:00:00', 'YYYY-MM-DD HH24:MI:SS')";

# Alter some SPFILE parameters during the clone.DUPLICATE DATABASE TO MYCLONE SPFILE parameter_value_convert ('DB11G','MYCLONE') set db_file_name_convert='/u01/oradata/db11g/','/u01/oradata/myclone/' set log_file_name_convert='/u01/oradata/db11g/','/u01/oradata/myclone/' set control_files='/u01/oradata/myclone/control01.ctl','/u01/oradata/myclone//control02.ctl','/u01/oradata/myclone/control03.ctl' set db_name='MYCLONE' set log_archive_dest_1='location=/u01/oradata/myclone/arch' BACKUP LOCATION '/source/app/oracle/fast_recovery_area/DB11G' NOFILENAMECHECK;

The time it takes to complete varies depending on the size of the database and the specification of the server. Once the process is finished RMAN produces a completion message and you have your duplicate instance.

Active Database Duplication

Oracle 11g introduced the ability to create duplicate databases directly without the need for a backup. This is known as active database duplication. The process is similar to the backup-based duplication, with a few exceptions.

First, and most obviously, you don't need a backup of the source system, but it does have to be in ARCHIVELOG mode.

The passwords in the password files must match for both servers, so remember to set the correct password when creating the password file on the destination server.

Both the source and destination database servers require a "tnsnames.ora" entry for the destination database. In this case I added the following to each server. The destination server still requires the source entry shown in the previous section.

# Added to the tnsnames.ora on source and destination server.DB11G-DESTINATION = (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = ol5-112-dup2)(PORT = 1521)) ) (CONNECT_DATA = (ORACLE_SID = DB11G) ) )

The destination server requires static listener configuration in a "listener.ora" file. In this case I used the following configuration. Remember to restart or reload the listener.SID_LIST_LISTENER = (SID_LIST = (SID_DESC = (GLOBAL_DBNAME = DB11G.WORLD) (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1) (SID_NAME = DB11G) ) )

LISTENER = (DESCRIPTION_LIST = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = ol5-112-dup2.localdomain)(PORT = 1521)) ) (DESCRIPTION = (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521)) ) )

ADR_BASE_LISTENER = /u01/app/oracle

When connecting to RMAN, you must use a connect string for both the target and auxiliary connections.$ ORACLE_SID=DB11G; export ORACLE_SID

$ rman TARGET sys/password@DB11G-SOURCE AUXILIARY sys/password@DB11G-DESTINATION

Include the FROM ACTIVE DATABASE clause in the DUPLICATE command.DUPLICATE DATABASE TO DB11G FROM ACTIVE DATABASE SPFILE NOFILENAMECHECK;

For more information see:Duplicating a DatabaseStep by Step Guide on Creating Physical Standby Using RMAN DUPLICATE...FROM ACTIVE DATABASE [ID 1075908.1]

Hope this helps. Regards Tim...