roller screens double roll crushers - trf limited roller crusher.pdf · double roll crushers...
TRANSCRIPT
Double Roll Crushers
= As the material is CRUSHED ONLY ONCE when it passes through the gap, the percentage of FINES IS MUCH LESS.
= Used for almost any material and for crushing up to 0.5 mm.
= More economical because of its higher production capacity and lower power requirment.
= Easy and simple to maintain.
= Produces more uniform material than any other crusher having reciprocating motion.
= Uniform wearing of crushing surface.
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
Side View of Double Roll Crusher
Double Roll Crushers
Description and UsesTwo rolls rotate in opposite directions in thiscrusher. The material is fed between the tworolls for compressive action and breaking intofragments of uniform size. Simplicity ofmechanical construction and ease ofoperation are the two highlights of thiscrusher. The amount of fines generated fromcrushing is relatively small, a performancefeature which qualifies this machine for use inthe following installations:
The Double Roll Crusher is availablewith heavy duty rolls for crushing suchhard materials as ore or with light dutyrolls for crushing relatively soft materials.
each roll assembly consist of a roll boss with
hexagonal outer shape rigidly mounted on
the roll shaft which permits easy replacemant
of roll tyre. The roll tyres are held tight by
means of bolts. This arrangement provides
for easy tyre replacement and minimizes
parts subject to wear. The roll tyres are made
of high manganese steel.
(3) Bearings
Spherical roller bearings are used to
support the rolls. The spherical roller
bearings are complete with labyrinth
seals and packings for preventing
entrance of dust and leakage of oil.
(4) Drive
The standard Double roll crusher has
independent belt drives from two
motors, one motor for each roll. This
arrangement eliminates the need for an
intermediate drive transmitting device
resulting in less space utilisation and
reducing the no-load power loss.
(1) FrameA cast-iron or steel-plate frame is used.The steel-plate frame is fabricated bywelding. The plummer blocks of fixed rollassembly are integral with the frame.The Plummer Block for the movable rollassembly are elastically positioned inhorizontal direction with high-strengthcoil springs or hydraulic accumulatorsselected for the type of crushing duty.This elastic mounting includes a meansof adjusting the roll-to-roll clearance (rollsetting) and serves as a protectivefeature for preventing motor over load ordamage to the crusher, as the roll willyield and back away when it grips hard
foreign matters like tramp iron.
(2) RollsRoll tyres are of smooth type, corrugatedtype or toothed type, depending on thecrushing duty. In the standard design
SORTING PLANTS OF MINES
COAL MINES
CEMENT PLANTS
CHEMICAL PLANTS
=
=
=
=
(for crushing ore)
(for crushing coal and waste)
(for crushing clay, lime and gypsum rocks)
(for crushing lime, coal, coke, rock salt, etc.)
SMELTING PLANTS
COAL-FUEL POWER PLANTS
=
=
(for crushing coal)
(for crushing sintered ore and cinder)
Construction
TRF LIMITEDAEnterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
DIMENSIONS (in MM) :
SIZE Dia. D x L
600 X 600
750 X 600
750 X 750
750 X 900
750 X 1200
750 X 1500
900 X 900
900 X 1200
900 X 1500
900 X 1800
900 X 2100
900 X 2400
1200 X 1200
1200 X 1800
1200 X 2400
1400 X 2500
D
600
750
750
750
750
750
900
900
900
900
900
900
1200
1200
1200
1400
L
600
600
750
900
1200
1500
900
1200
1500
1800
2100
2400
1200
1800
2400
2500
A
350
596
596
596
596
596
600
600
600
600
600
600
800
800
800
900
B
650
686
850
1050
1300
1500
1000
1350
1600
1900
2200
2500
1400
2000
2600
2700
A1
1100
1850
1850
1850
1850
1850
1850
1850
1850
1850
1850
1850
2200
2200
2200
2300
B1
650
900
1050
1300
1500
1700
1150
1500
1750
2000
2300
2800
1600
2200
2800
2900
A2
660-730
800-870
800-870
800-870
800-870
800-870
900-1000
900-1000
900-1000
900-1000
900-1000
900-1000
1200-1300
1200-1300
1200-1300
1250-1400
K
830
1010
1200
1300
1350
1450
1300
1400
1660
1800
1950
2100
2100
2400
2600
2700
K1
1475
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
3000
3000
3000
3200
H
1030
1475
1475
1475
1475
1475
1650
1650
1650
1650
1650
1650
1850
1850
1850
1900
H1
930
1375
1375
1375
1375
1375
1500
1500
1500
1500
1500
1500
1700
1700
1700
1800
H2
430
625
625
625
625
625
650
650
650
650
650
650
700
700
700
800
Likh
ra / Jsr. (0
65
7) 2
29
13
56
Roller Screens
= Higher capacity up to 1500 TPH running at low power compared to conventional screens
= Less space required
= Higher screen efficiency
= Non clogging, smooth, non-vibrating and low noise while running
= Length and width of roller screens can be adjusted to suit customers’ requirement
TRF LIMITEDA Enterprise
TEC
HN
ICA
L S
PE
CIF
ICA
TIO
NS
Roller Screens
Description
Application :
Construction :
Roller screens consists of a rigid main frame and a series of
roller disc assemblies mounted on shafts and supported on
spherical roller bearings across the width of main frame. These
roller discs are elliptical in shape and arranged at a pre-
determined distance in such a way that they form a square or
rectangular opening in the roller screen at several places. Over
sized materials are pushed forward by rotation of elliptical
discs and finally reach the crusher as feed, while undersized
material falls through the screen opening. The scrapper
provided below the elliptical discs ensures clog free screening.
These roller shaft assemblies are driven by chain and sprocket
arrangement. All roller shaft assemblies are connected
alternately with chain and sprocket and are driven in same
direction by two drive units. Drive is fully covered and operates
in a circulating oil bath.
Each roller screen has two drive units along with electric motor,
fluid coupling, gearbox and drive sprocket.
TRF Roller screens are most suitable for separating coars
wet and sticky raw material. Roller screens are used in soft coal,
and lignite handling plants for preliminary screening of ROM
coal. It acts as relief to crushers and ensures a clog free flow of
wet and sticky materials. TRF roller screens are useful for
separation of undersized material ranging from (-) 20 mm. to (-)
60 mm. The roller screens can be placed horizontally or at
angle of maximum 10 degrees.
The roller screens consist of a rigid frame on which a series of
roller shaft assemblies are mounted with anti-friction bearings
Drive :
MATERIAL FLOW DIRECTIONFEED CHUTE
OVER SIZEDISCHARGE
CHUTE
UNDER SIZEDISCHARGE CHUTE
TRF LIMITEDAEnterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
Likh
ra / Jsr. (0
65
7) 2
29
13
56
Double Roll Crushers
=As the material is CRUSHED ONLY ONCE when it passes through the gap, the percentage of FINES IS MUCH LESS.
=Used for almost any material and for crushing up to 0.5 mm.
=More economical because of its higher production capacity and lower power requirment.
=Easy and simple to maintain.
=Produces more uniform material than any other crusher having reciprocating motion.
=Uniform wearing of crushing surface.
TRF LIMITEDAEnterprise
TEC
HN
ICA
L SP
EC
IFICA
TION
S
Side View of Double Roll Crusher
Double Roll Crushers
Description and UsesTwo rolls rotate in opposite directions in thiscrusher. The material is fed between the tworolls for compressive action and breaking intofragments of uniform size. Simplicity ofmechanical construction and ease ofoperation are the two highlights of thiscrusher. The amount of fines generated fromcrushing is relatively small, a performancefeature which qualifies this machine for use inthe following installations:
The Double Roll Crusher is availablewith heavy duty rolls for crushing suchhard materials as ore or with light dutyrolls for crushing relatively soft materials.
each roll assembly consist of a roll boss with
hexagonal outer shape rigidly mounted on
the roll shaft which permits easy replacemant
of roll tyre. The roll tyres are held tight by
means of bolts. This arrangement provides
for easy tyre replacement and minimizes
parts subject to wear. The roll tyres are made
of high manganese steel.
(3) Bearings
Spherical roller bearings are used to
support the rolls. The spherical roller
bearings are complete with labyrinth
seals and packings for preventing
entrance of dust and leakage of oil.
(4) Drive
The standard Double roll crusher has
independent belt drives from two
motors, one motor for each roll. This
arrangement eliminates the need for an
intermediate drive transmitting device
resulting in less space utilisation and
reducing the no-load power loss.
(1) FrameA cast-iron or steel-plate frame is used.The steel-plate frame is fabricated bywelding. The plummer blocks of fixed rollassembly are integral with the frame.The Plummer Block for the movable rollassembly are elastically positioned inhorizontal direction with high-strengthcoil springs or hydraulic accumulatorsselected for the type of crushing duty.This elastic mounting includes a meansof adjusting the roll-to-roll clearance (rollsetting) and serves as a protectivefeature for preventing motor over load ordamage to the crusher, as the roll willyield and back away when it grips hard
foreign matters like tramp iron.
(2) RollsRoll tyres are of smooth type, corrugatedtype or toothed type, depending on thecrushing duty. In the standard design
SORTING PLANTS OF MINES
COAL MINES
CEMENT PLANTS
CHEMICAL PLANTS
=
=
=
=
(for crushing ore)
(for crushing coal and waste)
(for crushing clay, lime and gypsum rocks)
(for crushing lime, coal, coke, rock salt, etc.)
SMELTING PLANTS
COAL-FUEL POWER PLANTS
=
=
(for crushing coal)
(for crushing sintered ore and cinder)
Construction
TRF LIMITEDA Enterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
DIMENSIONS (in MM) :
SIZE Dia. D x L
600 X 600
750 X 600
750 X 750
750 X 900
750 X 1200
750 X 1500
900 X 900
900 X 1200
900 X 1500
900 X 1800
900 X 2100
900 X 2400
1200 X 1200
1200 X 1800
1200 X 2400
1400 X 2500
D
600
750
750
750
750
750
900
900
900
900
900
900
1200
1200
1200
1400
L
600
600
750
900
1200
1500
900
1200
1500
1800
2100
2400
1200
1800
2400
2500
A
350
596
596
596
596
596
600
600
600
600
600
600
800
800
800
900
B
650
686
850
1050
1300
1500
1000
1350
1600
1900
2200
2500
1400
2000
2600
2700
A1
1100
1850
1850
1850
1850
1850
1850
1850
1850
1850
1850
1850
2200
2200
2200
2300
B1
650
900
1050
1300
1500
1700
1150
1500
1750
2000
2300
2800
1600
2200
2800
2900
A2
660-730
800-870
800-870
800-870
800-870
800-870
900-1000
900-1000
900-1000
900-1000
900-1000
900-1000
1200-1300
1200-1300
1200-1300
1250-1400
K
830
1010
1200
1300
1350
1450
1300
1400
1660
1800
1950
2100
2100
2400
2600
2700
K1
1475
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
2200
3000
3000
3000
3200
H
1030
1475
1475
1475
1475
1475
1650
1650
1650
1650
1650
1650
1850
1850
1850
1900
H1
930
1375
1375
1375
1375
1375
1500
1500
1500
1500
1500
1500
1700
1700
1700
1800
H2
430
625
625
625
625
625
650
650
650
650
650
650
700
700
700
800
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56
Roller Screens
=Higher capacity up to 1500 TPH running at low power compared to conventional screens
=Less space required
=Higher screen efficiency
=Non clogging, smooth, non-vibrating and low noise while running
=Length and width of roller screens can be adjusted to suit customers’ requirement
TRF LIMITEDAEnterprise
TEC
HN
ICA
L SP
EC
IFICA
TION
S
Roller Screens
Description
Application :
Construction :
Roller screens consists of a rigid main frame and a series of
roller disc assemblies mounted on shafts and supported on
spherical roller bearings across the width of main frame. These
roller discs are elliptical in shape and arranged at a pre-
determined distance in such a way that they form a square or
rectangular opening in the roller screen at several places. Over
sized materials are pushed forward by rotation of elliptical
discs and finally reach the crusher as feed, while undersized
material falls through the screen opening. The scrapper
provided below the elliptical discs ensures clog free screening.
These roller shaft assemblies are driven by chain and sprocket
arrangement. All roller shaft assemblies are connected
alternately with chain and sprocket and are driven in same
direction by two drive units. Drive is fully covered and operates
in a circulating oil bath.
Each roller screen has two drive units along with electric motor,
fluid coupling, gearbox and drive sprocket.
TRF Roller screens are most suitable for separating coars
wet and sticky raw material. Roller screens are used in soft coal,
and lignite handling plants for preliminary screening of ROM
coal. It acts as relief to crushers and ensures a clog free flow of
wet and sticky materials. TRF roller screens are useful for
separation of undersized material ranging from (-) 20 mm. to (-)
60 mm. The roller screens can be placed horizontally or at
angle of maximum 10 degrees.
The roller screens consist of a rigid frame on which a series of
roller shaft assemblies are mounted with anti-friction bearings
Drive :
MATERIAL FLOW DIRECTIONFEED CHUTE
OVER SIZEDISCHARGE
CHUTE
UNDER SIZEDISCHARGE CHUTE
TRF LIMITEDA Enterprise
TRF Limited11, Station Road Burma Mines, Jamshedpur-831007, Jharkhand
Phone : +91- 657-3046500/ 598
Fax no. : +91- 657-2345732, e-mail : [email protected]
HYDERABAD
Business Development Department
Block - D, 3rd Floor,
22 Camac Street, Kolkata - 700 016
Ph : +91-33-44033553
e-mail : [email protected]
Bulk Material Handling SystemsPort &Yard Equipment Division
Assistant General Manager
Cell : + 91 - 9334002278
Ph : +91-657 - 3046242
Fax : +91-657-2345214
e-mail : [email protected]
NEW DELHI
Himalaya House,
11th Floor 23, Kasturba Gandhi Marg
Ph : +91-11-223310788 / 23314540
Fax : +91-11-23722447
e-mail : [email protected]
Flat No. 601, 6th Floor,
Paigah Plaza, Basheerbagh,
Ph : +91-40-23297630 / 23297631
Fax : +91-40-23297363
e-mail : [email protected]
MUMBAIMagnet House, 1st Floor,
Narottam Morarji Marg, Ballard Estate,
Ph : +91-22-22616853 / 22641320
Fax : +91-22-22614085
e-mail : [email protected]
REGIONAL OFFICES
MARKETING OFFICES
HEAD OFFICE & WORKS
Bulk Material Handling EquipmentAssistant Divisional Manager
Cell: +91-9304813195
Ph: +91-657-3046259
Fax: +91 - 657-2345724
e-mail: [email protected]
Lik
hra
/ J
sr.
(06
57
) 2
29
13
56