kue ken crushers

7/28/2019 Kue Ken Crushers

1/26

TESAB Vibrating Grizzly Feeder

TESAB Vibrating Grizzly Feeder

New and unused

Length 4 400 mm

Width 940 mm

Grizzly bars on front 1 000 mm of length

Complete with springs and spring bases

Twin shaft vibrating mechanism

KUE KEN 95 (900 x 600 mm) Primary Jaw Crusher

BL KUE KEN 95 (36" x 24" / 900 x 600 mm) double toggle primary jaw crusher.

Weight 12.2 Tonnes

Dimensions L W H 2980 x 1749 x 2432 mm

Jaw Setting Capacity

3" / 75 mm 111 T / Hr

4" / 100 mm 138 T / Hr

5" / 125 mm 174 T / Hr

Equipment Specifications

Manufacturer KUE-KEN

Model 25x42

Price Call

Location Shelburne Falls, Massachusetts

Serial Number 5178-S

Condition Used

KUE KEN CRUSHERS


2/26

ON THIS PAGE YOU WILL FIND COPIES OF LITERATURE FOR KUE KEN JAW

AND OTHER CONE CRUSHERS, INCLUDING FEATURES AND BENEFITS,

SPECIFICATIONS, AND CAPACITIES. KUE KEN WAS PURCHASED BY METSO

MINERALS, WHO NOW IS THE OFFICIAL SOURCE FOR SPARE PARTS AND

SERVICE. THERE ARE OTHER SUPPLIERS OF PARTS AND SERVICE, PLEASE

CONTACT USFOR FURTHER INFORMATION.

KUE KEN MANUFACTURED KUE KEN CRUSHERS FOR OVER 80 YEARS. BASED

IN OAKLAND, CALIFORNIA THEY USED AMERICAN STEEL, ENGINEERING,

AND CRAFTSMEN TO MAKE A SUPERIOR PRODUCT. THEY MEET THE

REQUIREMENTS FOR FREE-TRADE EXPORTING OF BEING MADE IN AMERICA.

PLEASE CLICK ON THE FOLLOWING LINKS FOR FURTHER INFORMATION

KUE KEN JAW CRUSHERS

KUE KEN CONE CRUSHERS

TECHNICAL PAPER ON CRUSHING

EXAMPLES OF KUE KEN JAW CRUSHERS
http://www.conquip.us/CONTACT_US.htmlhttp://www.conquip.us/CONTACT_US.htmlhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#KK_JAWhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#KK_JAWhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#KK_CONEhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#KK_CONEhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#TECHNICAL_PAPERhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#TECHNICAL_PAPERhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#TECHNICAL_PAPERhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#KK_CONEhttp://www.conquip.us/KUE_KEN_CRUSHERS.php#KK_JAWhttp://www.conquip.us/CONTACT_US.html


3/26

FOR ADDITIONAL INFORMATION ON CRUSHERS PLEASE GO TO:

WWW.USEDCONECRUSHERS.COM

WWW.USEDJAWCRUSHERS.COM

KUE KEN JAW CRUSHERS

SOME IMPORTANT REASONS KUE KEN JAW CRUSHERS COST FAR LESS TO RUN, MAINTAIN,

AND REPAIR THAN OVERHEAD ECCENTRIC STYLE OF JAW CRUSHERS.

ENERGY EFFICIENT: Kue Ken jaws use 50-60% less power that an equal sized overhead eccentric jaw

crusher. Example: Kue Ken 42X48 jaw crusher uses a 150 HP motor and a 42X48 overhead eccentr ic jaw

crusher uses a 250 HP motor .

LOWER WEAR PART COSTS: Kue Ken jaw dies last 2-3 times longer when crushing

abrasive materials because of "straight line" crushing.

LONGER LASTING AND LOWER COST BEARINGS: Kue Ken jaw bearings run in a

totlly-enclosed oil bath with constant filtration. They also use 2 standard off-the-shelf non-proprietory bearings instead of the 4 used by overhead eccentric jaw crushers.

EASY BEARING REPLACEMENT: Bearings can be changed without removing the swing

jaw.

LONGER TOGGLE SEAT LIFE: The toggles and seats are in an enclosed sealed oil bath

environment.
http://www.usedconecrushers.com/http://www.usedconecrushers.com/http://app4.websitetonight.com/designer/www.usedjawcrushers.comhttp://app4.websitetonight.com/designer/www.usedjawcrushers.comhttp://app4.websitetonight.com/designer/www.usedjawcrushers.comhttp://www.usedconecrushers.com/


4/26

SIMPLE AND NON-DAMAGING TRAMP IRON RELIEF SYSTEM: A simple spring

loaded relief system disconnects the flywheel from the drive motor when an uncrushable

item falls into the crushing chamber. To reset the relief system just takes minutes, with no

broken toggles to replace.

DOUBLE-TOGGLE DESIGN HANDLES HARD AND ABRASIVE CRUSHING

ENVIRONMENTS: Kue Ken jaw crushers can handle 50,000 PSI rock. they are especially

effective in handling mineral ores such as gold and silver


5/26


6/26


7/26


8/26


9/26


10/26


11/26


12/26

TOP OF PAGE

KUE KEN CONE CRUSHERS
http://www.conquip.us/KUE_KEN_CRUSHERS.php#Top_of_pagehttp://www.conquip.us/KUE_KEN_CRUSHERS.php#Top_of_pagehttp://www.conquip.us/KUE_KEN_CRUSHERS.php#Top_of_page


13/26


14/26


15/26


16/26


17/26


18/26

TOP OF PAGE

TECHNICAL PAPER ON CRUSHING


19/26


20/26


21/26


22/26


23/26


24/26


25/26


26/26

TOP OF PAGE

kue ken crushers

Documents