rru pole mount family - elektroskandiaericsson rrus, with or without psu. the double rru mount,...
TRANSCRIPT
R R U P O L E M O U N T F A M I L Y
*Article MAFI 4019-2/3/4
MAFI 4019-*
Rev 3
Designed to provide a secure mounting solution for two, three or fourEricsson RRUs, with or without PSU. The double RRU mount, 4019-2, can also accomodate a configuration with two A2 units.
FlexibilityThe 4019-3 and 4019-4 will fit any round member from Ø25 to Ø114mm, or any equal-angle or square-section member from 40 x 40 to 80 x 80mm. The 4019-2 will fit any round member from Ø40 to Ø114mm, or any square-section member from 40 x 40 to 80 x 80mm.
How to OrderTo order this kit, please contact MAFI quoting Article Number:4019-2 or E-order number (SEG): 60006844019-3 or E-order number (SEG): 60006854019-4 or E-order number (SEG): 6000686Contact information can be found at www.mafi.se.
RRU Pole Mount Family
MAFI 4019-3
MAFI 4019-2
© 2016 MAFI AB. All rights reserved
MAFI 4019-4
x2
Content of kit
EN 1090
R R U P O L E M O U N T F A M I L Y
*Article MAFI 4019-2/3/4
MAFI 4019-*
Rev 3
Part listParts Material 4019-2 4019-3 4019-4
Clamps S355MC FZV 4 4 4
Sheet profile S355MC FZV - 2 2
Threaded Rods M12 8.8 FZV 4 4 4
Bolts M10 8.8 FZV 8 8 8
Flange bolts M10 A4 8 12 16
Bushings S355J2H FZV 4 8 8
Nuts M10 8.8 FZV 28 36 36
Washers FZV 20 24 24
Parent pole/leg
Tightening torque
4019-3: 40 x 40 up to80 x 80mm4019-4: 40 x 40 up to80 x 80mm
40 x 40 up to80 x 80mm
4019-2: Ø40 - Ø114mm 4019-3: Ø25 - Ø114mm 4019-4: Ø25 - Ø114mm
Threaded rods M10: 18Nm or 26Nm Bolts M10: 41Nm
Package dataProduct Length Width Height Weight
4019-4 810mm 260mm 60mm 11,5kg
4019-3 430mm 360mm 60mm 10,6kg
4019-2 360mm 230mm 90mm 5,8kg
MAFI 4019-2
MAFI 4019-3MAFI 4019-4
© 2016 MAFI AB. All rights reserved
Ericsson RRU family and other units with horizontal c/c distance of 146mm (5 ¾”)
Compatible RRU-models
R R U P O L E M O U N T F A M I L Y
*Article MAFI 4019-2/3/4
MAFI 4019-*
Rev 3
Fmass
FmassFmass
Fmass
Load resistanceMax equipment weight: 35kg per equipment fitting instance (Fmass≈345N). An ultimate transient man-load of 2400N is also accepted.
Design resistance data The load limits given in this data sheet apply only to the MAFI product in its intended use. For this product family the dimensioning factor is considered to be weight of equipment and transient man load.The designer should always check that the supporting structure can safely carry the loads applied to it by the MAFI product.
© 2016 MAFI AB. All rights reserved