rt 3070 the driver and the cracking in enlish

8/13/2019 RT 3070 the Driver and the Cracking in Enlish

1/18

. Driver installed and setting1.Install the driver

Double click ,then to install(Notice : Before you install driver,pls do not insert wireless adapter)

Choose ,clickNext

Choose the automatic icon ,then click Next


2/18

Appearing the following picture,then choose the icon andclick Next

After seeing the fol lowing pictures ,then click instal l ,Notice:If the driver


3/18

couldnot be setup,pls close your antivirus program before installing,because

some antivirus maybe influenced the the installation

The driver is installing ,picture as follows

After instal led the driver ,then click Fin ish


4/18

You will see an icon in your taskbar of computer after installed the driver,it

means the driver installation be finished.Then insert our wireless usb adapter to

you computer ,after finished the automatic updates ,the computer can connect

network which donot need any password

2.Preferences of Network

Double click the icon which in the lower right of Taskbar,appearing thefollowing picture

Clink the buttom appearing the following picture,then click the thebuttom ,ref resh the network (The more you refresh ,the more networks you


5/18

will see )

Click and choose the network (SSID ,which you should know thepassword .here ,for example ,TYY ) .Then click the buttom which in above

picture ,appearing the following picture:

Then click the icon (Next),appearing the picture as follows


6/18

Click the icon again,you will see the pictrue

Enter the password in the blank area of WEP Key ,then click the icon,appearing the following picture:

(Notice :you should enter the correct password ,or else you wouldnt connect

the network and get the IP)

If there are several networks ,you can click the Use Pre-logon

Connection ,in this case ,you can pre-connect this network.

NOTICE: The opt ions in the is default customer options.Click the icon in above picture,then appearing the picture as fol lows


7/18

Click the network TYY , then click the icon :

The softeware can get the IP address automatically ,after

connect it successfully ,then you can share the internet .

Install the VM(virtual machine) andcrack the password

1. Install the VM

Double click the icon a few minutes later,appearing thefollowing picture


8/18

Click

Choose Typical ,then click

Then click


9/18

Choose all of them ,then click

Click the icon to install,after a few minutes ,appearing the pictureas follows

Here ,you should back the the VM file and open it ,then click the icon


10/18

and copy the in Serialthen enter it in the blank of serialnumber

Clich to login:

Click ,after install,you will see a picture as fol lows

Click ,then finished the installation.


11/18

2Settings of virtual machine

Click the icon in your desktop appearing the followingpicture,then choose YES and click OK

Then appearing the picture as follows:

Click the icon , then choose the Typical later ,click


12/18

Choose Linuxshould choose the correct version other linux 2.6.x kernel :

Click (choose the location what you want):

Choose the ,then click Next :


13/18

Later ,you can create the virtual machine successfully.

3. Crack the password

Double click then choose ,and find the thedocument beini.ISO , click

Click the green button then it appears picutre as follows

Click ,to start the document of beini-1.2.2.iso

Open Beini, it wil l appear a picture, then you see many opt ions, and we choosethe first one which is default. ( wait about one minute, and you will enter it

sucussefully.


14/18

Notice: when you launch the VM, you should connect wireless adapterandchoose VM-Removable Devices-USB Devices-Realtek USB Devices as fo llows,

(if you cannot grap data when cracking , then you must forgot th is step) When

you see a hook in Realtek USB Devices, it means it connects the wireless adapter,

if not, you shall connect it again.


15/18

Then ,it st rats cracking

(Entering Beini interface)

Click the icon minidwep-gtk,then appearing the following picture:

Then clik OK ,you will see:


16/18

Click the bottom of Scan, which it is scanning wireless network, then youwill see:

Choose AP which you want to crack ( In client column , the higher power datais , the better singal will be. It also wi ll be more easy to crack the code) then click

lauch , it begains cracking.


17/18

Hex key:1351010644 This is key (Notice: the time that we need to crack the code

depends on data. When data arrives about twenty thousand or beyond this data

the password will appear. If the data do not grow in this period, it means the

packet is very small, so it may can not crack i t, then pls change AP to crack )

Remarks: If need to crack WPA or WPA 2, you can choose WPA in Encrption

option, the picture as follows:

Click Scanbutton, then it will appear AP, choose the AP you want to crack.


18/18

Finally, click Lanch button, it begins cracking. (Generally speaking,theencrypt ion of WPA and WPA 2 is not very easy to crack ,especially for compl icatd

encrypt ion that may be digital, or composed of digitaland letter , or composed of

digital , letter and specific symbol. For some simple encrytiopn, it wil l be ok.

Notice:

1.Ways of starting the beini software : start from the CD(Put the CD into

CD-ROM ,then start the computer and entering the system ). start from VM2.Use the bottom Ctrl+Alt ,you can switch you mouse between local

computer and VM Beini sofeware.

3.Logout the beini software:right -click the mousechoose the icon logoutleft-click and cancel the hook in Buckupclick the shutdown.4.when enter the beini software in starting the computer ,how to logout the

beini software:

Right-click mouse choose logout left-click and cancel the hook inBuckup choose Reboot and click OK ,then logout the CD in CD-ROM

quickly,and enter your local computer system.

rt 3070 the driver and the cracking in enlish

Documents