RUMBA

RumbaRumba employs a clean, simple design language, creating a strong, bold style, further underlined by its firmly grounded stance.

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREEFEATURES Rumba workstation showcases exceptional stability, rigidity and strength without compromising on visual resolution. Supporting individual and collaborative work modes, Rumba can be customised to meet every need, with a range of sizes, shapes and finishes that allow for personalisation and flexibility. With a high focus on enhancing the end user’s feeling of wellbeing, Rumba utilises electric telescopic legs that provide a height range of 610mm to 900mm (sit to sit) and 620mm to 1230mm (sit to stand). Rumba is compatible with 25mm and 32mm worktops, with screening solutions Zenith S30, Cloud and Ctrl™ rail and accessories.

FINISHESFrames: Dulux standard colours (custom colours upon request)Tops: Laminate, Veneer (specials upon request)Screen: Various shapes and finishes available. (Refer to Screens and Ctrl™ specification brochure).

CERTIFICATIONS

DESIGN ZENITH Design

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREE

STANDARD FEATURES/FINISHES FIXED HEIGHT

TECH ADJUST WINDER ADJUST

2 STAGE ELECTRIC ADJUST

Fixed height: Overall height 720mm • –– –– ––Tech adjust: Standard adjustment range 610mm to 900mm –– • –– ––Winder adjust: Standard adjustment range 610mm to 900mm –– –– • ––2 Stage electric adjust: Standard adjustment range 620mm to 1230mm –– –– –– •

25mm benchtop • • • •180 degree single • • • •180 degree pod of 2 • • • •120 degree single and 90 degree 3 end single • • • •120 degree pod of 3, 90 degree pod of 4 X and 90 degree pod of 2 T • • • •180 degree runs of 2, 3, 4, 5 and 6 • • • ––

180 pods of 4, 6, 8, 10 and 12 • • • ––Frame finished in Dulux standard colours • • • •Laminated or veneer tops • • • •Adjustable glides • • • •Glovebox - Patented wire management system • • • •Low power standby –– –– –– •Integrated system protection –– –– –– •Anti-collision sensor –– –– –– •Memory buttons and height readout –– –– –– ++Bluetooth app control –– –– –– ++S30, S50 and cloud screens (refer to Screens specification brochure) ++ + + +

Ctrl™ (refer to Ctrl™ specification brochure) ++ + + +Compatible with Floorsight (refer to Floorsight specification brochue) ++ + + + •• Standard feature – Not available + Optional feature

* Custom solutions: Our extensive capabilities and collaborative approach with clients enables customisation and flexibility to meet your specific needs

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREE

2 Stage Electric AdjustTech/Winder Adjust

720 61

0 - 9

00

620

- 123

0

Fixed Height

180 Degree Single

90 Degree Pod 4 X90 Degree Pod 2 T

120 Degree Pod 3

180 Pod 2

90 Degree 3 End - LH & RH120 Degree Single

Workstation Configurations

Height Adjustment Range

Fixed Height: Overall height 720mm including 25mm benchtops.Tech Adjust: Standard adjustment range 610mm to 900mm including 25mm benchtops.Winder Adjust: Standard adjustment range 610mm to 900mm including 25mm benchtops.2 Stage Electric Adjust: Standard adjustment range 620mm to 1230mm including 25mm benchtops.

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREE

180 Degree Single

180 Degree Single

120 Degree Single

180 Degree with S30Arm Mounted

Single Desk withScreen Frame Mounted

Single Desk withScreen in Ctrl™ Rail

Pod with Screen Cross beam Mounted

90 Degree Single

Min

600

Max

900

Min 600Max 900

Min

600

Max

900

Min

120

0M

ax 2

700

Min 600

Max 900

Min 900Max 2700

Min 1200Max 2700

Min 12

00

Max 2

100

120 Degree Single90 Degree Single

Min 600Max 900

Min

600

Max

900

Min

120

0M

ax 2

100

Min 700

Max 900

Min 1200Max 2400

Min 12

00

Max 1

700

Electric Worktop Size Limitation

Min

600

Max

900

Min 1200Max 2400

Fixed height, Tech Adjust and Winder Adjust: Available in pods of 2, 4, 6, 8, 10 and 12 and runs of 2, 3, 4, 5 and 6

Fixed/Tech/Winder Worktop Size Limitation

Screen Examples

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREE

96m Duct with Duct Covers 180 Degree with 96mm Duct 180 Degree Pod with 96mm Duct

Wire Basket

Cable Sleeve

96mm DuctAccess Floor Powerblade 180 Pod of 2 with 96mm Duct

Access Floor Powerblade

180 Degree with Cable Sleeve

180 Degree with Wire BasketBenchtop Mounted

250mm x 750mm Cable Tray(For Pods Only)

180 Pod of 2 with 250mm x 750mmCable Tray, Crossbeam Mounted

75

250

Cable ManagementDucting

Wire Basket

Cable Sleeve

Cable Tray

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREE

600

- 900

720

720

720

900 - 2400

900 - 2400

900 - 2400Max400

Max400 1800 - 5400

Max400

Max400

1200

- 18

00

1200

- 18

00

1200

- 18

00

2 Legs with Feet(Fixed Height, Tech Adjust, Winder Adjust & 2 Stage Electric Adjust)

4 Post Legs(Fixed Height)

4 Post Legs with Central DS CTRL Rail(Fixed Height)

6 Post Legs(Fixed Height)

Table Examples

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREE

Single End Leg with Foot

120 DegreeCorner LegBench End Leg

Double Leg Double Leg with Foot

Single End Leg with Foot & Duct Arm

Single End Leg withFoot & Screen Arm

Leg Types

RUMBA 90 DEGREE, 120 DEGREE & 180 DEGREECARE & MAINTENANCELAMINATEFor general cleaning use a soft clean cloth and a mild detergent in warmwater. Wipe the surface gently to remove dust or marks. Always rinse aftercleaning with fresh water to remove any remaining detergent. For heavierstains use a non-abrasive cleaner. Excessive scrubbing may damage thedecorative surface, particularly a gloss finish.METALFor general cleaning use a soft clean cloth and a mild detergent in warmwater. Wipe the surface gently to remove dust or marks. Always rinse aftercleaning with fresh water to remove any remaining detergent.POWDER COATRemove loose deposits with a wet sponge (avoid scratching the surface bydry dusting). Use a soft clean cloth and mild detergent in warm water. Wipethe powdercoating to remove dust, salt or other deposits. Always rinseafter cleaning with fresh water to remove any remaining detergent. In somecases, strong solvents recommended for thinning various types of paints andalso for cleaning up are harmful to the extended life of the powder coatedsurface. These solvents should not be used for cleaning purposes.SOLID TIMBERAvoid direct sunlight. Don’t scrub the surface with an abrasive cloth as this can damage the timber and the finish. Dust and wipe down the timber surface regularly with a slightly damp soft cloth. VENEERDust and wipe down the veneer surface regularly with a slightly damp softcloth. Furniture polish recommended for the appropriate wood finish willremove soil and dust and provide a protective coating to guard againstfuture spills. Polishing more than 3-4 times per year will see a buildup ofcloudy film. Water or liquid spills should be wiped up immediately andavoid placing hot items directly on the veneer surface.FABRICGently spot clean excess liquid from the fabric surface. Do not saturate orscrub the fabric with water or cleaning liquids. Every fabric compositionvaries and the individual fabric supplier should be contacted for furtherfabric care instructions.ECHOPANELRemove dust and marks with a soft damp cloth and mild solutions of warm water and upholstery shampoo. Blot dry with a solution free soft damp cloth.PLASTICUse a damp cloth and mild cleaning product. Dry with a soft cloth. Do not use abrasive cleaning agents or cloths.WHITEBOARDUse a whiteboard duster for general erasing. For tough marks (ghosting)use a professional whiteboard cleaner and wipe with soap, water and aclean cloth afterwards. To prevent ghosting, the ink should be completelydry before erasing. Excessive smearing and smudging can occur if wet inkis attempted to be erased.

FeaturesStandard Features/FinishesWorkstation Configurations & Height Adjustment RangeSize Limitation & Screen ExamplesCable ManagementTable ExamplesLeg TypesCare & Maintenance