ruukki solar systems for walls
TRANSCRIPT
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 1
RUUKKI SOLAR SYSTEM FOR WALLS
RUUKKI SOLAR SYSTEM FOR WALLS IN A NUTSHELL Solar PV system for generating clean renewable energy Facade integrated systedm For new and existing buildings
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 2
Make you sustainable values visible by utilizing Ruukki’s solar facade systems!
Ruukki Liberta Solar (BIPV)* • Architectural glass facade with integrated solar PV • Solid glass surface without flashings and minimum seams • Ideal for offices and shoping centres • Suitable for both new buildings and renovations * BIVP = Building Integrated Photo Voltaics
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 3
RUUKKI SOLAR SYSTEM FOR WALLS IN A NUTSHELL
SOLAR RADIATION IN EUROPE
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 4
• Solar radiation carries energy, which is harnessed by the solar PV panels
• Solar radiation is about 1000 kWh/m2 in a year in Nordics and about 1200 kWh/m2 in Central Europe.
• Most radiation is available from March to September
SOLAR ELECTRICITY USAGE
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 5
Solar electricity yield • Solar PV power typically ~130…165Wp/m2* • Annual yield around 100-125kWh/m2
• 100m2 set produces ~10 000…12 500kWh/a
Electricity usage • Consumed by the building (if low feed-in tariff) • Fed into the grid (if good feed-in tariff)
Example -1000m2 warehouse: • Ventilation: 3000…6000kWh/a • Lighting: 16000…47000kWh/a
Average electricity consumption / building type
kWh/floor-m2,a
Shop Warehouse Industrial Sports
Ventilation 14-24 3-6 3-16 15
Lighting 47-95 16-47 31-47 36-55
*Wp=Watt-peak (nominal power of the PV module)
RUUKKI SOLAR SYSTEM – PUBLIC FUNDING Public funding for renewable energy
• Public funding is aimed for helping the market penetration of new technologies • Public funding may be available for also solar investments • Funding possibilities vary country-by-country • For example in Finland, up to 30% funding is available from Motiva
Check funding possibilities from your government!
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 6
LEED & BREEAM Extra credits through renewable energy • Possibilty to gain extra Leed and Breeam credits Leed • EA Credit 2. “On-site Renewable Energy”; 1-7 points • Based on the share of renewable energy • 1% 1 point; 13% 7 points Breeam • Ene 5 – Low or Zero Carbon Technologies (LZT); 1-3 points • Based on on reduction on CO2-emissions
• 1st point: LZT specified based on feasibility study • 2nd point: LZT results in 10% reduction in CO2 –emissions • 3rd point: LZT results in 15% reduction in CO2 –emissions
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 7
RUUKKI LIBERTA™ SOLAR FACADE
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 8
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 9
RUUKKI LIBERTA™ SOLAR – SYSTEM DESCRIPTION
• Visually and architecturally impressive glass facade which produces solar energy
• Functionally and visually completely integrated to facade without any visible add-ons (BIPV – Building Integrated Photo Voltaics)
• Enables solutions of a high architectural standard. Nearly black solid glass surface without flashings, slim 8mm seams.
• Ideal for offices and shopping centres.
• Suitable for new buildings and renovation.
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 10
RUUKKI LIBERTA SOLAR – TECHNICAL PROPERTIES
Solar technology • Based on CIGS-film technology (copper-indium-gallium-selenide) • Power: 152Wp/m2 (145Wp/module) • Performance guarantee: 25years*
Dimensions • Module size: 798mm x 1198mm x 39mm • Module weight: 17.6kg/m2
• System weight: <25kg/m2
Colour • Nearly black glass
*Module output level ≥80% guaranteed for 25 years.
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 11
RUUKKI LIBERTA SOLAR - DELIVERY CONTENT
INVERTER DC AC
Inverter All cables
DC switch (for safety and maintenance)
AC switch (for safety and maintenance)
Solar PV modules and support frame system
Also included in delivery : Electrical design & installation instructions for the set
Ruukki delivery content & responsibility (excluding installation) Customer
System installation
Electric design of the building
Connecting system to grid
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 12
Liberta Solar panel installation, fast and easy: • First support studs attached to backing wall -> straightening the surface if needed • Solar panels are attached to frame with screws • Same principle as normal Liberta Rainscreen panels • Fast and easy installation for facade, tested over 20 years • Wall installation start from left lower corner • Gap between panels 8 mm
Electrical system installation, foolproof: • No visible cables, no penetrations to wall • All cabling behind modules, ready wiring harness • Factory-made connectors (foolproof and reliable) • Fast connection, connectors easy to use • Wiring system easy to follow (for electrician) • Inverter fully automatic with all safety aspects • Wiring and connections are very familiar to electricians • All electrical components included with delivery
RUUKKI LIBERTA SOLAR – STRUCTURE & INSTALLATION
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 13
RUUKKI LIBERTA SOLAR – RETURN OF INVESTMENT Earnings • 200m2 of Ruukki Liberta Solar • Power: 32kWp • Output: ~24 000kWh/a • Energy price: 0.12EUR/kWh • Earning: 2 900€/year
Costs • Ruukki Liberta Solar: 80 000€ • Installation: ~20 000€ • Total cost: 100 000 € • Equivalent glass facade: 50 000€* • Extra cost over glass facade: 50 000€
Annual interest: ~4%
*200€/m2 + installation 50€/m2
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 14
RUUKKI LIBERTA SOLAR – LIBERTA GLASS
• Liberta Solar size is fixed – can not be adjusted.
• To achieve unified glass facade: Liberta™ Glass panels provides needed adjustment pieces for corners and openings.
• Liberta™ Glass can be corresponding to Liberta Solar colour or it can be chosen from variety of other colours.
Liberta Glass™ corner example
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 15
RUUKKI LIBERTA SOLAR – DESIGN POSSIBILITIES
• Ruukki Liberta™ Solar is part of Ruukki Design Palette product family
• Easy to combine with other Design Palette products: SHAPES, MATERIALS, COLOURS
• Flexibility, free design for shapes and dimensions for other parts of surface to complete the facade architecture
• Possibility to create glass facade as whole, or combine metal, glass and solar energy in an innovative way
• Unified surfaces, rich in nuances
ENERGY
SHAPES
MATERIALS
COLOURS
Ruukki Design Palette: SHAPES, MATERIALS, COLOURS and ENERGY. Experience Palette at www.ruukki.com/designpalette
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 16
RUUKKI LIBERTA SOLAR – BENEFITS
Makes your company’s sustainable values visible Architecturally impressive facade Creates clean renewable energy Complete installation package
15/4/2015 www.ruukki.com | Pasi Turpeenniemi | PUBLIC 17
THANK YOU!