safety glazing tification council safety
TRANSCRIPT
certified products directorysafety glazing material used in buildingsvisit our website @ sgcc.org
safety glazing certification council®
PRSRT STDU.S. POSTAGE
PAIDSOUTH BEND, IN PERMIT NO. 369
July 1, 2021
certified products directorysafety glazing material used in buildingsvisit our website @ sgcc.org
safety glazing certification council®
PRSRT STDU.S. POSTAGE
PAIDSOUTH BEND, IN PERMIT NO. 369
July 1, 2019
SGCC® 2021 Fall Meeting September 28 - 30, 2021
Hybrid Virtual/Naples Bay Resort 1500 Fifth Avenue South • Naples, FL 34102 • (239) 530-1199
The 2021 SGCC® Certification Committee Meeting will be offered both virtually and in person at the tried and true Naples Bay Resort. We are confident that this dynamic will ensure optimal meeting
attendance and further expand our communicative reach in the SGCC community.
Tentative Meeting Schedule
Tuesday, September 28,2021 6:30 - 8:30 SGCC® Board of Directors Dinner (Location TBD) Wednesday, September 29, 2021 7:30 - 8:00 Light breakfast *Board Members Only 8:00 - 12:00 SGCC® Board of Directors Meeting & lunch *Board Members and guests only 1:00 - 5:00 SGCC® Certification Committee Meeting (Hybrid Virtual option as well) 5:00 - 5:15 SGCC® Participants Meeting (Hybrid Virtual option as well) 6:00 - 7:30 Cocktail/Hors d'oeuvres Reception (Location TBD) Thursday, September 30, 2021 7:30 - 8:00 Light breakfast 8:00 - 12:00 SGCC® Certification Committee Meeting (Hybrid Virtual option as well) For Hotel reservations due August 28th:
SGCC Group Rate Hotel: Naples Bay Resort Website
Phone (toll free): 1-866-605-1199 request SGCC Meeting group rate discount
SGCC Group Rate: $149 plus tax per night (traditional room) If attending Virtually or In Person, please RSVP to the SGCC office ([email protected]) by August 28th 2021. If you experience any difficulties making a reservation or have any questions, please contact the SGCC office at 1-315-646-2234. As always, we thank you, and look forward to seeing everyone in September!
July 2021
Page 1
Safety Glazing Certification Council Certified Products Directory (CPD)
Certification Program for safety glazing materials found to be in compliance with one or more of the following specifications:
"American National Standard for Safety Glazing Materials used in Buildings - Safety Performance
Specifications and Methods of Test: ANSI Z97.1-2015"
Copies of ANSI Z97.1-2015 may be obtained by calling (212) 642-4900, writing the following address or visiting the following website:
American National Standards Institute
11 W 42nd St., #13th Fl New York, NY 10036-8002
https://webstore.ansi.org/SDO/GISC
"Consumer Products Safety Commission Safety Standard for Architectural Glazing Materials - at Title 16, Part 1201 of the Code of Federal Regulations: 16 CFR 1201"
Copies of 16 CFR 1201 may be obtained by calling (202) 512-1800, writing the following address or
visiting the following website:
Superintendent of Documents
PO Box 371954 Pittsburg, PA 15250-7954
https://www.reginfo.gov/public/jsp/eAgenda/GetPrintedCopies.myjsp
SGCC "Record of Compliance Testing" to support a manufacturer's CPSC Certificate of Compliance Testing may be obtained, when authorized by the SGCC licensee, at
http://www.sgcc.org/Compliance-Testing.aspx
"National Standard of Canada - Tempered or Laminated Safety Glass CAN/CGSB 12.1-2017"
Copies of CAN/CGSB 12.1 may be obtained by calling (613) 238-3222, writing the following address or visiting the following website:
The Secretary Canadian General Standard Board
Ottawa, Canada K1A 1G6 https://www.techstreet.com/standards/can-cgsb-12-1-2017?product_id=1944892
Additional copies of this Certified Products Directory may be obtained by contacting the SGCC® office or
by going to our website for a PDF copy PO Box 730
205 W. Main Street Sackets Harbor, NY 13685
Phone: (315) 646-2234 Fax (315) 646-2297 [email protected]
Or visit our website @ www.sgcc.org
SGCC® information and guidelines are included in the twice per year printing of the Certified Products Directory or are available from SGCC® upon request. Re-printing of this information in any other manual, material or document without the written permission of SGCC® is in conflict with the desire of SGCC® and should not be interpreted as being endorsed by or affiliated with SGCC®.
Safety Glazing Certification Council 2020
July 2021
Page 2
Table of Contents ANSI Z97.1-2015 .......................................................................................................................................... 1
CPSC 16 CFR 1201 ...................................................................................................................................... 1
CAN/CGSB 12.1-2017 .................................................................................................................................. 1
Meetings of the Certification Committee ....................................................................................................... 3
Roster ............................................................................................................................................................ 3
Accreditation ................................................................................................................................................. 5
Program Concept ........................................................................................................................................ 15
Procedural Guide ........................................................................................................................................ 17
Quality Assurance Program & Requirements ............................................................................................. 18
How the Certification Program Works ......................................................................................................... 19
Complaints and/or Appealing a Certified Product ....................................................................................... 20
What Does the Program Cost ..................................................................................................................... 21
Certification Guidelines and Interpretations ................................................................................................ 23
Laminated Glass ......................................................................................................................................... 29
SGCC® Advertising Guidelines .................................................................................................................. 34
SGCC® Label Requirements ...................................................................................................................... 35
CPSC Act Labeling Requirements .............................................................................................................. 36
Certified Products Listing ............................................................................................................................ 37
Certified Products Key ................................................................................................................................ 75
Classified Tempered Glass Patterns .......................................................................................................... 76
SGCC® List of Accepted Interlayers ........................................................................................................... 78
SGCC® Approved Laboratories .................................................................................................................. 80
Safety Glazing Certification Council 2021
July 2021
Page 3
MEETINGS OF THE CERTIFICATION COMMITTEE The Certification Committee of the Safety Glazing Certification Council meets annually. Minutes of these meetings may be obtained by writing to the Administrative Manager of the Safety Glazing Certification Council (SGCC®) or by visiting the SGCC website at www.sgcc.org
Certification in this directory is current as of the date of issue, however, products may be certified or have certification removed from time to time. For the most current information, please contact the Administrative Manager of SGCC® or visit the SGCC website at www.sgcc.org
Any questions, comments, or requests for copies of this directory should be directed to the Administrative Manager of the Safety Glazing Certification Council:
ADMINISTRATION Administrative Management Systems, Inc. (AMS)
PO Box 730 205 West Main Street
Sackets Harbor, New York 13685 Telephone: 315-646-2234
Fax: 315-646-2297 E-mail: [email protected]
Website: www.sgcc.org
ADMINISTRATIVE STAFF John G. Kent, Administrative Manager Sara Connor, Program Coordinator Katrina Stafford, Program Manager Kristin Best, Program Coordinator Kelly Jenness, Program Coordinator Abby Putnam, Program Coordinator
ROSTER
SGCC® BOARD OF DIRECTORS
SGCC® OFFICERS
REPRESENTING PUBLIC INTEREST Mr. William Nugent Ms. Elaine S. Rodman Wiss, Janney, Elstner Associates, Inc. Homeowners Association 330 Pfingsten Road 2300 Sample Road Northbrook, IL 60062-2095 Allison Park, PA 15101 Phone: (847) 272-7400 Phone: (412) 487-2887 Fax: (847) 291-9599 Ms. June Willcott Mr. Peter Weismantle Willcott Engineering, Inc. Adrian Smith & Gordon Gill Architecture 1727 North State Road 7 30 West Monroe, Suite 400 Margate, FL 33063 Chicago, IL 60603 Phone: (954) 975-7979 Phone: (312) 870-4126 Fax: (954) 975-7509 Fax: (312) 920-1775 Mr. Patrick Loughran Goettsch Partners, Architecture, Interiors, Planning, Enclosures 224 South Michigan, Floor 17 Chicago, IL 60604 Phone: (312) 356-0600
President Mr. Brian Louks Vice President Ms. June Willcott Secretary Mr. Jeff Haberer Treasurer Ms. Elaine S Rodman
July 2021
Page 4
REPRESENTING INDUSTRY
Mr. Mark B. Cody Mr. Jeff Haberer AGC Flat Glass North America Trulite Glass & Aluminum Solutions, LLC P.O. Box 929 1112 17th Avenue SE Kingsport, TN 37662 Minneapolis, MN 55414 Phone: (423) 229-7222 Phone: (612) 805-2251 Mr. Brian Louks Mr. Mark Hutchinson Viracon Inc. Intigral 800 Park Drive 7850 Northfield Road Owatonna, MN 55060 Walton Hills, OH 44146 Phone: (507) 444-3233 Phone: (440) 439-0980 Mr. Bernie Herron Cardinal 7201 West Lake Street Saint Louis Park, MN 55426 Phone: (952) 929-3134
Honorary Non-Voting Lifetime Member
Mr. Norman Nitschke
COMMUNICATIONS In all matters concerning the administration and implementation of the SGCC® certification program, correspondence may be directed to any of the following: Mr. Brian Louks, President Mr. Mark B. Cody, ChairmanSGCC® Board of Directors SGCC® Certification CommitteeViracon Inc. AGC Flat Glass North America800 Park Drive P.O. Box 929 Owatonna, MN 55060 Kingsport, TN 37662 Phone: (507) 444-3233 Phone: (423) 229-7222 Fax: (507) 444-3556 Mr. John G. Kent Program Administrator Administrative Management Systems, Inc. (AMS)P.O. Box 730 205 W. Main Street Sackets Harbor, NY 13685 Phone: (315) 646-2234 Fax: (315) 646-2297
LEGAL COUNSEL FINANCIAL AUDITOR Mr, David McHugh Mr. Robert Stackel & Mr. Jacob NavarraSchiff, Hardin & Waite Stackel & Navarra, CPA, PC 233 S. Wacker Drive, Suite 6600 216 Washington St. Suite 402 Chicago, IL 60606 Watertown, NY 13601 Phone: (312) 258-5617 Phone: (315) 782-1220 Fax: (312) 258-5600 Fax: (315) 782-0118
July 2021
Page 5
ACCREDITATION In 2016 the American National Standards Institute (ANSI) issued ISO/IEC 17065 Accreditation to the SGCC® Certification Program and AMS, Inc., the program Administrator and Certification Body (CB). This Accreditation is a formal recognition of fulfilling the requirements of the ISO/IEC 17065:2012 standard, as well as ANSI’s own accreditation requirements.
What is Accreditation? Accreditation is similar to certification. Just like in certification there is an independent party who assesses and determines whether or not an organization meets specific requirements. In the case of ANSI’s assessment of the SGCC® Certification Program and AMS, Inc., they were assessed to ISO standard ISO/IEC 17065:2012. The end result is called accreditation.
Who is ANSI? The American National Standards Institute is a not-for-profit entity providing assessment and accreditation of bodies performing third-party conformity assessment (certification), among other services. ANSI also brings global recognition to conformity assessment through several international and regional arrangements for multi-lateral recognition, including the International Accreditation Forum (IAF). In addition, ANSI has a memorandum of understanding (MoU) with the Standards Council of Canada (SCC). All of this helps bring global acknowledgement to conformity assessment. Information from: ansica.org, Why Seek Accreditation?, 2015. Web. August 19, 2015.
What is ISO/IEC 17065:2012? ISO/IEC 17065:2012 is an internationally-recognized standard for bodies certifying products, processes and services. It is the main source of criteria used to assess the SGCC® Certification Program and AMS, Inc. The standard specifies requirements that, according to ISO/IEC 17065:2012, “ensure that certification bodies operate certification programs in a competent, consistent and impartial manner…”.
How will this affect my Certification? Accreditation of the SGCC® Certification Program and AMS, Inc. is the formal recognition that they have met strict requirements placed on them. This means that as a manufacturer, operator or provider of certified products, you can be sure that the SGCC® Certification Program is operated to some of the highest quality standards in the world. Because the SGCC® Certification Program and AMS, Inc. have always followed stringent guidelines there will be minimal changes to the certification program. When changes are necessary though, you will be notified in advance. Though the SGCC® Certification Program requirements won’t change much due to the accreditation, it does offer an opportunity for manufacturers to show conformance to an ANSI-Accredited certification program, an invaluable association to set you apart in the market. For more information, and restrictions and limitations, please contact AMS, Inc.
Disclaimers While there are significant benefits to being associated with this accreditation, accreditation doesn’t mean that ANSI approves certified products, processes, or services of Licensees. In addition, the ANSI Accreditation symbol and ANSI logo are not permitted to be displayed on any product or its packaging.
Questions or Want to Learn More? If you have any questions or need additional information regarding any of the topics presented above, please feel free to contact AMS, Inc. at (315) 646-2234, or email us at [email protected].
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Galo Narvaez24 Hour Thermal Glass Insulated Ltd.Kenny McCutcheon3 FormAlton L. Smith Jr. Russel HardyA.L. Smith Glass Co. Inc.Dhanraj Singgh Parmar Rakesh Kumar PalA.N. ALODAN & SONS CO. GLASS & ALUMINIUM Jean Lelievre Ezhilenthi NarayananAAG-Al Abbar Architectural GlassGus Fotopoulos Gin BennerAccurate Glass ProductsJeong HaeyouAce Safety Glass Co., Ltd.David MurryAdvanced Design ManufacturingJeff Besse Ralph HensonAdvanced Impact TechnologiesKent Lundin Shaun KumarAdvanTecJeff WilkinsAGNORA LTDLyon YeAJJ Glass Products Co., LtdFardis Fashutdinov Dmitry AvramenkoAKMA LLCAhmad Arafa Bashar TalebAl Andalus Glass Factory Co.Manny ValladaresAldora Aluminum and Glass Products, Inc.Dane TreiberAll Counties Glass DistributorsMark Timoll Jamal RahamanAll Team Glass & Mirror, Ltd.Alan VasquezAll Weather Tempering of Arizona, LLC.Mariusz LojowskiAllglass Tempering Inc.Wassim HashashAluminum Manufacturers Co. Ltd - ALUMATECSuraj ThampiAluminum Technology Auxiliary IndustriesClint Blair Shane EllerbeeAmerican Insulated Glass LLC.Christopher Perry Robert DeckerAmerican Shower DoorJoe JonelyAmsco WindowsEgemen Ozkaya Elcin BatmazogluAnt-Cam Pazarlama A.S.Matt Rolek Don SokolAnthony InternationalSharon GambillArchitectural Glass Products, LLC.Charlie Hoelscher Jeff WeberArlene Stained Glass & DoorGiambattista Amode Kyle MichaelArmoured One Glass LLCBrandon Michalak Jason ZiemakArrow Mirror & Glass, Inc.John Tagle Karen TagleArtVue GlassAndy Zhu Lily FuAscent Glass Products (Zhong Shan) LimitedStephen SchwartzATI WindowsDale Schmidt Gary BrownBasco Engineered ProductsLi Hui Lu Xiao YongBazhou hua Biao Furniture Co., Ltd.Kun WangBeijing Northglass Technologies Co. LtdMr. Gao HongweiBeijing Wuhuatianbao Glass Co., Ltd.Jeffrey JamesBel Pre Glassworks Inc.Bill Sain Ryan Sain Bill FolinoBel Shower Door CorporationRobert Jayson Michael TryonBendheim Wall SystemsJohn Barber Amber SimonBG Glass Technologies Inc.Ellie Salehi Mohammad GhadakiBlackline Aluminum SystemsAlex OanonoBlue Star Glass Inc.Bronson Lam Annie LamBronco Industries, Inc.Myler Kehoe Bud HodginsBronx Westchester Tempering Inc.Keshav Tripathi Murtaza KachwalaBurhani Glass Factory, LLCMike MorganBVGLAZING SYSTEMSClark RobinsonC&C Custom Glass & Tempering, LLCJohn Alajaji Troy Gillion Shane BakerCameron Glass, Inc.Volkan Erem Birol YilizCamyapi Cam Paz. Ins. Taah. Tic.ve San. Ltd. StiMichelle Phan Robert GrommeshCardinal IG
Page 6
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Michael CarewCarey Glass UCRyan O'Connell Travis Jaynes Cat-I Manufacturing, Inc.Vincent Crouson Geoff SmithCentral Valley Glass & Screen, Inc.William Calhoun Ken HurleyCGMI Acquisition Company LLC dba Clearlight GlasJiang WeiChangshu Fardglass Co. Ltd.Qian LanChangShu Maybo Glass Co., Ltd.Denise Weier Denise Lu Changshu Weier Glass Products Co. Ltd.Zhong ChunChangshu Xingfu Glass Building Material Co., LTDLisa LeeChangshu ZhongCheng Building Materials Co., Ltd.Xiaodong QianChangshu Zhouxing Glass Co. Ltd.Adam KaczynskiChicago Tempered Glass, Inc.Mr. Sun DahaiChongqing SYP Engineering Glass Co., Ltd.Wang HongmeiClassy Glass Specialties Co., LtdScott SherwinClear Lite DBA Innovative Glass Products LLCTim WidnerCleer Vision Tempered GlassKim Stowell Gregory StowellClinton Glass CompanyDouglas SchulmanColorkote CT, LLCOscar Zavala Reynaldo DelgadoComercial Dialum SATom Willey Secena ZurawskiCommercial Insulating Glass Co.Vincent Cormier Nancy PayetteCompagnie de Portes Énergétique EDCRod PistokacheComplete Line Glass Wholesalers, Inc.Shane Merryman Louis MerrymanConsolidated Glass Corp.Donald Wootton Trevor WoottonContemporary Glass Tempering, LLCGeoffrey Davis David TomlinsonContour Industries, Inc.Bill CrawfordContract GlassJack ViolanteContractors WardrobeAlvaro Del Rio Alicia Rosa MoraledaControl Glass, A&S, S.L.Eric Fleming Lance HammondCoral Industries Glass DivisionAdrian Ionescu Rob BusbyCore Fabrication Inc.Jaume Planes OlivesCricursa SAJose Israel Perea S.CristacurvaClaudina Suarez Luis GomezCrystal Tempering, Inc.Zhang XiaojunCS ECO Glass (M) Sdn BhdWalter Kuenzle Rosemarie KuenzleCurved Glass Creations, LLCEric ReederCustom Glass Products Inc.Doug DaubmannD3 Glass, LLCStephanie ShiDalian Huaying Glass Limited Liability Co.Tom HolmanDallas Flat Glass Distributors, Inc.David UheyDenver Glass Interiors, Inc.Yang MinDeqing Sanxing Plastic Chemical Co. Ltd.Cody TranDillmeier Enterprise, Inc.David Bazzano Chris Cotton Dlubak Specialty GlassJose PrietoDolphin Glass Specialists, LLCLuis Garranchan Jose Antonio PrietoDolphin Temper Glass LLCYu GuangHuiDongGuan CSG Architectural Glass Co., Ltd.Leo Zhao Mellisa GuDongguan Dehui Industrial Co., LTD.Shenwen LiDongguan Dongfa Glass Product Co., LtdMo BalasubramaniamDouble Seal Insulating Glass Ltd.Hugh HigginsDowney GlassRyan BumgarnerEagle Glass & MirrorRon EcholsEchols Glass and MIrror, Inc.
Page 7
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Christian EckeltEckelt Glas GmbHSamuel Bravo Jeanie GutierrezECO Glass ProductionRenildo OrdunaEdge TemperingTim FikkertEFCO CorporationDavid CoulombeEngineered Glass Products, L.L.C.Andrea Facchin Giuseppe RovedaEpta S.P.A.Mehmet Ali Ozgul Yavuz Selim BodurErdem Dis Ticaret A.S.Frederik De Knijf Erik WeckxEuroglas-De Landtsheer NVJaime A Salas Hellen SolanoExtrusiones de Aluminio, S.A.Jorge JaramilloFairis C.A.Doug Lewis Flat Glass Distributors, Inc.David Wei Li ChunpengFlat Glass Group Co., Ltd.Grace ZhouFoshan Ganghuasheng Tempered Glass Co; LtdMr. Chen LiangwenFoshan Gaoming Yaqi Toughened GlassWang Ming Hua Wang MinFoshan Nanhai Nengyang Electrical Technology Co.,Frank GuoFoshan Nanhai Ruixin Glass Co., LTD.Mai Yao DongFoshan Nanhai Yaoxiang Glass Product Co. Ltd.Anthony de le Fuente Julie A KesslerFountain Glass Inc.Wendy Chen Wei Teresa Lin Bishan Fujian Chengda Glass Co., LtdWendy Zhong Kun WeiFujian Tider Glass Co., Ltd.Hunter HaoFujian Xihe Sanitary Ware Technology Co., LtdTerry ArsenaultG.E. Silliker & Sons Ltd.Eugene Negrin John O'KeefeGalaxy Glass & StoneLucas Brooks Derek RhoadesGardner Glass Products Inc.Liviu Bocsanu Nick MeissnerGaribaldi Glass Ind. Inc.Greg BakkenGeneral GlassChristina Antunes David S. BalikGGI Glass Distributors Corp.Lio Chang Shih, Chin-LiangGin Jye Ming Glass Co., Ltd.Yong Woong, LeeGLAAM Co., Ltd.Rafael PerezGLASPROLarry AbramowskiGlass and Mirror CraftErick QuirozGlass Deluxe Inc.Martha CalzadillaGlass Depot Inc.Mauricio AlonsoGlass Design of Miami, Inc.Joshua BurgGlass Enterprises Inc.Romas ZvirzdinasGlassbel Baltic JSCRenato SantanaGlassecViraconBrian FreaGlassFab Tempering Services, Inc.Marwan Khadij Hemraj AryaGlasstech Industries B.S.C.Bob Becker Hector ArrietaGlassTemp, Inc.Robert MastrapaGlasswerks LA, Inc.Bill FolinoGlaz-Tech Industries, Inc.Braxton SmithGlenny Glass Co.Mark JohnsonGlobal Security GlazingHao Bing TianGnT Glass Co., Ltd.Cathie Saroka Mike SarokaGoldray Industries Ltd.Kent Nusser Craig CoxGreat Day Improvements, LLCJohn MetzGriffin Glass & Metal Werks, Inc.Carlos Benet Trad Gabriel Howerton Grupo Vidrios el CastilloJack Huang Allen KuoG-TECH Optoelectronics CorporationWang Jinlin Sven Pan Guangdong Haikong Special Glass Technology Co.,
Page 8
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Fengqiang Wang Qin WangGuangdong Rosery Bath Science and Technology CTaylor Lee Jie WUGuangdong South Star Glass LimitedJohn Arambula Wayne GriffinGuardian Glass, LLC - AuburnSamih Fatayerji Pascoal DsilvaGulf Glass Industries, Co. LTDJared Ross George RufraHoskin & Muir, Inc. dba Cardinal TemperingDong Shui Huang Wenjun Huang Huahui Glass (China) Co., LDVilius Garsva Adam ShearerImagic Glass Inc.Alexander WeinbergerIndustrial Tempering GlassSteve OuelletIndustries Vanier Inc.Kevin Duke Tom DukeInkan LtdLarry VasholzInsulite Glass Co., Inc.Ben NayotIntegral Seal Mfg. Inc.Ebbie MogfordIntegrity Glass Tempering, LLC.Johanne Tousignant Ian TardifInter Fonction LteeAndy Yu Ms. Wendy ZhongIntex Glass (Xiamen) Co., Ltd.Mark Hutchinson Allen FeltesIntigralSirio Pierobon Michael CanilIsoterglass SRLLixin ChenJ&C International Ltd.Jorge Caceres Yuri RabeiroJ&Y Glass ServicesCameron Moag Alex AcevedoJ.C. Moag CorporationChristine Wu Rounder ChenJiangmen Jianghai Jin Ying Tempered Glass Ltd.Song Congcong Shi ZhongyueJiangsu Chunge Glass Co., Ltd.Ms. Wang LijuanJiangyin Mingyang Glass ProductionLi Ma Pengtao ZhangJinzhou Fortune Spring Glass Co., Ltd.Mayreni Morales Jose MoralesJM GlassLi Xiang ShengJYC Glass Co. Ltd.David StoneKensington Glass ArtsEmil Krajacarek Ivica KusevicKFK d.o.o.Howard Bergh Gregg HigashiKinestral Technologies Matt Wright Doug Glisson Buddy ThompsonKohler CompanyMichele Inserra Roberta SammarcoLa Tecnica Nel Vetro SpAGuillaume Jacob David LevesqueLaurier Architectural, Inc.Patrick CayaLes Verres VMIK Inc.Gavin Pan Lily WongLiaocheng Chicheng Glass Material Co., Ltd.Kevin Slagle Bharat BhatLippert ComponentsZhang Zhixiang Ann GongLongDing Glass Production Co., Ltd.Christoper KapiloffLTI Smart Glass, Inc.Yanbing LiLuoyang LandGlass Technology Co., LTDMauricio Millet Medina Juan Polanco Ricardo TonueyoM Industria S.A. DE C.V.Joseph L. Stevens Jenny StevensM&M Tempering Inc.Chris MammenM3 Glass TechnologiesMatthew HoytManko Window Systems- COKevin TysonManko Window Systems- IAKevin DixManko Window Systems- KSMatthew DalbkeMaryland Glass & MirrorAlain Bravo Rodriguez Carolina Munoz RodriguezMaxividrio S.De R. L. de C.V.Gary McGroryMcGrory GlassDon BielawskiMercer Glass Fab LLCRoeland HF PouwelsMerck Window Technologies B.V. Michelle MagyarMid-American Glass, Inc.Patrick IaquintoMidwest Glass Fabricators Inc.
Page 9
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Oscar Alarcon Eric YarbroughMilgard TemperingNermin Berbic Taylor ThibertMirror Works Inc.Robert Liao Raymond GaoMr. Glass Tempering, LLCMartin Cormier Annie CormierMultiver LteeScott Scheffield Richard PaschelNashville Tempered Glass Corp.Marc MartellNew Angle BevelingJason CaoNew Century Glass & Aluminum LLCJessee WuNingbo Xinxin Glass Technology Co., LtdMark Maslanka Michael RauschNiskayuna GlassBarrington Timoll Henry PhamNorfinch Glass & Mirror Mfg. Ltd.Buddy Grater Leonard FordNortheast Building ProductsStan MuriskaNorthwestern Glass FabJohn ButlerNorthwestern Industries, Inc- Yuma, AZNadine TardifNovatech Canada Inc. Cristiano Lucentini Giuliano TonioloNovavetro S.r.l.Haidong WengNY Tempering LLCRick Wright James JensenOldcastle BuildingEnvelope®Alvaro BeltranOnyx Solar Energy, S.L.Nadine WeißPan-Dur Glass GmbHTony Bettencourt Colin ReesPanoramic Doors LLCBarry DeLong Chris WalkerParagon Tempered GlassMichael BiancoloPatriot Armored Systems, LLCTim WilkinsPennsylvania Insulating GlassEnrique PresaPerficom S.A. DE C.V.Steve NielsenPFG Glass IndustriesRod HershbergerPGT IndustriesDanny Zhu Ben ZhuPhilly Glass Industry Inc.Sorin Nitescu Cristina DragoiuPietta Glass Working SrlAndy McDowell Mike DavidsonPilkington ArchitecturalZhao Zhenguo Luo QiaoliangPingdingshan Youbo Glass Technology Co., Ltd.Sebastian Gasser Elmir BolicPirnar-Staklo d.o.o.Dave CampbellPortland Glass ManufacturingRussell AlderPrecision Glass Bending CorporationKevin Waller Lance HamiltonPrecision Glass IndustriesStephane MercierPrelco Inc.Nancy Stuart Jocelyn OuelletPrelco MTL Inc.Seth JonesPremier Glass ProductsAdrian Wezgowiec Piotr ZawadaPress Glass Inc.Adam WierzbowskiPRESS GLASS SAConrad Lankford Mike LankfordPress Glass, Inc.Ruben GallegosPRL Glass SystemsJose Natividad Gonzalez MaizProductora y Distribuidora de Espejos S.A. de C.V.Victor SchererProduits Verriers International Inc.Silvio Tuffolo Vee ShivprasadProTemp Glass, Inc.Michal FlorczakPrzedsiebiorstwo TMF s.c. Florczak Tadeusz, FlorczMahud HalimPT Abebersa PratamaBernard LaxPulp Studio, Inc.Spring LiangQianse Acrylic Co., LTD.Haitao DuQingdao Himalaya Building Materials Co., LtdYan FengQingdao Ideal Building Material Co. Ltd.Tina Gu Yanmin YuQingdao Kingdom Glass Co., Ltd.
Page 10
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Bruce JiaQingdao Laurel Glass Technology Co., LtdXu Baowei Chen LeiQingdao Pioneer Glass Co.,Ltd.Yang Chuan Miss HaoQingdao Sun Teck Glass Co., Ltd.Gwang H. ParkQinhuangdao Ampac Building Products Co., Ltd.Dongsheng Yan Cindy Sun Qinhuangdao Jingxin Glass Co., Ltd.Linda Qin Cindy SunQinhuangdao Qicaishi Glass Processing Co., Ltd.Ms. Cheng NaQinhuangdao Rongsheng Glass Processing Co., Ltd.Yanjun Zhu Zhu YanJun Cheng Yi BinQinHuangDao Tianrui Tempered Technology Glass Curtis WeaversQuaker Window Products, Inc.Marvin AguilarQuality Enclosures Tempering, Inc.Michael SchwartzQuality Enclosures, Inc.Tom MarkowskiQuality Glass & Mirror, Inc.Zou XiangjunQuanzhou Shixing Trading Co., Ltd.Joe Kuykendall Charles BurtQuest USA, Inc.Daniel ZalcmanQuest Window Systemsilija Rokvic-RockyR.I.W. Ornamental Metal, Inc.Silverio PerezReady Glass & Mirror, Inc.Hamed HusseinReem Emirates Aluminum & GlassShervin Shahriari Mardi HuelsekopfRenin Canada Corp.Anthony d'Eon Christine d'EonRexlin Glass Ltd.Alex Yin Grant LeeRizhao Huaye Glass Co., Ltd.Alain FortinRobover Inc.Edilene Kniess Lenuir KniessRohden Vidros LTDAPaul Ferguson Steve CallahanSAAND Inc.Chuck Hayes Dianne DahlSAGE Electrochromics Inc.Alberto Boix Gladys RiosSaint Gobain Mexico, S.A. de C.V.Sven ToennigsSaint-Gobain Glassolutions Objekt-Center GmbHGeoff SparksSaudi American Glass CompanyAli Basher Kindi Jameson NacionalSaudi German Aluminum Products Co.Beena Walker Jack FrancisSCHOTT Gemtron - SweetwaterBill Bartlett Bruce BuschSCHOTT Gemtron (Canada) CorporationFabio Castiblanco Luz Adriana AlvarezSelective Shower Glass Designs Inc.Joseph SokalskiSenneca Holdings Inc, (Thermoseal Brand)Vianello ElioSfera SRLJames HuangSGC International Inc. Huanqing Zhang Xu PingShandong Jinjing Science & Technology Stock Co., Tao ZhenminShandong Kingtom Glass Co., Ltd.James HuShandong Yaohua Glass Co., Ltd.Xie ZhengchunShanghai Bordy Decoration Materials Co., Ltd.Dr. Sun Da HaiShanghai Yaohua Pilkington Glass Group Co., Ltd.Brian Y. L. ChongShanghai Zhenzhen Glassware Co., LTD. Brian BradfordShape Glass LLC.Hui Lin Wen WangSheng An Glass LLCZhang GuanghuiShenzhen Sun Global Glass Co., LimitedPage Giacin Larry GiacinShower Doors & More Inc.Liu SongSichuan CSG Energy Conservation Glass Co., Ltd.Jack BaumSierra Glass Fabrication Inc.David A. McElhinny Matthew DunnSIGCO, Inc.Tina Seese Steven SaffellSimonton WindowsMandeep Singh Devinder BainsSingh Glass & Mirror Inc. dba Luso Glass CompanyLance Hamilton Josh MunizSiO2 Fabricating
Page 11
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Sisecam Flat Glass Italy S.r.l.Ricky ZengSky Land Tempering Glass CorpDavid WildfieldSkyline DesignJim MillerSolar Seal Company-MAMichael SuttonSouth Bay Showers, Inc.Mark MichaelSouthern Wholesale GlassJohn Wanamaker Tom WanamakerSplendor Shower DoorDenise SwigartStandard Bent GlassEmrah ArslankaraStargrup Cam A.S.Mark ChenStrong Tempering Glass Industry LLCDennys FernandezSunfire Glass, Inc.Mr. Zhao Jianxin Steven ShungSunglas Technics Co., Ltd.Daniel J. Burke Kathleen B. Schweizer Charles BurkeSwift Glass Co., Inc.John DwyerSyracuse Glass Company, LLCTim ConroyTacoma Glass Mfg. Inc.Liu WoxianTai Shan City Da Heng Art Glass Ltd.Zhibing LiuTai Sheng (Dong Guan)Glass Co.,LtdEngr Mousa El Gedaily Engr Ahmad TawalbehTechnical Glass CompanyPat Murphy Jason HoovenTechni-Glass, Inc.Christian Daes Diana LohrerTecnoglass S.A.S.Ricardo Aguilar Martinez Sara Ivonne Penaloza RuizTecnovidrio S.A. de C.V.Genaro CortezTEMCOR S. DE RL DE CVSigfrido MartinezTemp Glass Inc.Michelle PascalTempco Glass and Fabrication, LLCOmar Rios Fernanda GarciaTemplados Del Centro SA DE C.V. Carlos Maldonado Pedro ChavezTemplados Industriales S.A. de C.V.Albert Wang Judy LiTG Qingdao Glass Co., Ltd.Melody BiTG Taicang Architectural Glass Co. LtdJohn SerinoThe Original Frameless Shower DoorFrancois OuelletteThermafix A.J. Inc.Ann OliveiraThermal Seal Insulating GlassBrad KloesThermalsun Glass ProductsPierre-Luc Bellavance Claude PelletierThermo BSLHeico Gensheimer Elias LuziusThiele Glas Werk GmbHDale HouckThompson I.G. , LLC.Zaida LiuTianjin CSG Energy Conservation Glass Co., LTDZhang Xue Anna WuTianjin Northglass Industrial Technical Co., Ltd.Clay Hargett Scott HoffmanTomakk Glass Partners, LLCOzgur HocaogluTrakya Glass Bulgaria EADTim KelleyTristar Glass, Inc.Sahaj R. PatelTriton Glass LLCAli GuneyTroy Systems LLCJeff Haberer Adrian Casas Trulite Glass and Aluminum SolutionsErcan Acar Burcu SekirTürkiye Şişe ve CamFabrikaları A.Ş. ŞişecamDüzca
David Lopez Ms. Alexandra Gonzalez TVITEC System Glass, S.L.Corey Myer Ed BlairTweddell's Inc.Franco Alfano David JaskulskiU.S. Glass Distributors Inc.Jorge Ontiveros Salva SorkaUngari Investments, LLC. (dba S.F. Tempering)Shakil Ahmed KhanUniglassDarin VietmeierUnited Plate Glass Co., Inc.Andy Yu Chen XinhuaUnitex Glass Chengdu Co., Ltd
Page 12
Mr. Antonio Santoro
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
David Chavoly Allen Gottlieb Upstate Glass Tempering Inc.Anil Kumar Sid DhirUS Glass Tempering Inc.Claudio ValentiniValentini Glass & Components srlJason Wu June MaVanbo Glass Industries Inc.Jason Fransen Neptali MorilloVelocity an Apogee CompanyMaurilio PaciVetreria F. Illi PaciFrederico Casaccio Chiara PastoreVetrodomus SpAIgnacio Flores SuarezVidrio Bisel S.A. de C.V.Prisciliano Bernal Ramírez Santiago de la Torre GarcíaVidrio Plano De Mexico S.A. DE C.V.Joe CrousonView Inc.Troy Burns David MaxwellViewrailBrian LouksViracon Inc.W. Chris Beeler Rodney Keatts Virginia Glass Products Corp.Kevin RothVistamatic, LLCLaura LunaVitelsa Mosquera S.A.Edgar Alonso de la CruzVitemexEliben Morelos Benjamin MorelosVitralum Glass Solutions Inc.Kevin Ramus Wayne BoorVitro Flat Glass, LLC (formerly PPG)Alberto Vilchis Trujillo Julio Castillo BarradoVitro SABTim Stewart Michael English Carmelita PenaVitrum Glass Ltd.Tim Stewart Carmelita PenaVitrum Industries Ltd.Michael Duncan Mr. Kim Hammerschmidt Viwinco, Inc.Robert HartongW. A. Wilson Inc.Rusty NeubauerW.C.P., Inc dba West Coast Insulated Glass ProductPaul Murphy Pauline KirwanWexford Viking Glass LimitedMark VeceWhalley Glass CoJabr DoshanWhite Aluminium Enterprises L.L.CKevin BoudreauxWholesale Glass Distributors, Inc.Hongwei Gao Zhu ZhuWHTB Glass, LLCJason Buehrer Brad AllisonWindow Creations, LLCMichael CastleberryWindow Technologies, Inc.Chuck Biesik James Kinsey Wisconsin Shower Door & Supply CorpRodger Ruff Chelsie CowlesWolverine Glass Products, Inc.Eduardo Raposo Simone IezziWoodbridge Glass Distribution Inc.Joshua FosterWoon-Tech Inc.Gary ReeceWSD Glass, Inc.Yu JinhuiWujiang CSG Huadong Architectural Glass Co., LTDWu Cong ZhenWujiang Golden Glass Technologies, Ltd.Anne Law Maggie LiangXiamen Shiner Industrial Co., Ltd.Lily Liu Eric WangXiamen Togen Building Products Co., Ltd.Ms. Yu JiaoXianning CSG Energy Conservation Glass Co., LTD.Zeming WangXinyi Glass (Yingkou) Co., Ltd.Janette Huang Ms. Cherry Li Xinyi Group (Glass) Co. Ltd.Faith Poyraz Murat TuncerYakut Cam A.SKelly JiangYantai Bluesky Glass Co., LtdXing JinweiYantai Dongfang Glass Co., LtdMevlude Kaynak Gulsen EkiciYildiz Cam San. Tic. A.S.Xiaojun ZhengYitian (Cattis) Glass Product Co., LtdAijun ZhongYong Feng Tai Foshan City Glass Co., LTD.Xiao RuijuanZhangjiagang City Daming Glass Product Co., LtdMr. Xu ZhengdongZhangjiagang Weiyu Fabricated Glass Co. Ltd.
Page 13
Licensee Primary Member First Alternate Second Alternate
SGCC Certification Committee
July 2021
Ms. Meng QingxianZhejiang Zhongli Energy Efficient Glass Mfg. Co., LtdYilan LiuZhongshan Walle Glass Product Co., LtdJoe HeZorro International Corporation
Certification Committee Chairman - Mark Cody
Member by virtue of being a directorPublic InterestPublic InterestPublic InterestPublic InterestGlasstech, IncPublic Interest
William NugentElaine RodmanJune WillcottPeter Weismantle Norman NitschkePatrick Loughran
Page 14
July 2021
Page 15
Revised 10/1/2014 ~PROGRAM CONCEPT~
The Safety Glazing Certification Council (SGCC®) is a non-profit corporation, established in 1971 by manufacturers of safety glazing products, building code officials, and others concerned with public safety. The purpose of SGCC is: (a) To promote public safety by encouraging maintenance of the highest standards of excellence in the manufacture of safety glazing materials. (b) To encourage and cooperate in developing standards related to other performance characteristics of glazing products. (c) To plan, organize, direct, coordinate and maintain a certification program for glazing materials to assure that glazing products meet applicable standards or performance requirements adopted or approved by the Council. SGCC® maintains a program which provides for the certification of safety glazing materials found to be in compliance with one or more of the following specifications:
American National Standard for Safety Glazing Materials used in Buildings - Safety Performance Specifications and Methods of Test: ANSI Z97.1-2015.
Consumer Product Safety Commission Safety Standard for Architectural Glazing Materials - codified at Title 16, Part 1201 of the Code of Federal Regulations: 16 CFR 1201 National Standard of Canada - Tempered or Laminated Safety Glass: CAN/CGSB 12.1-2017
These specifications subject safety glazing materials, used in buildings and architectural products, to practical tests designed to reduce or eliminate unreasonable risk of death and injury when safety glazing material is broken by human contact. The specification(s) to which a safety glazing material is certified by SGCC®, is at the direction of the licensee. SGCC® responsibilities are threefold: to conduct an independent routine sampling and testing program; to approve the form of a licensee's label; and to withdraw the licensee's authority to use that label if certified products do not meet specification(s). Management and control of SGCC® is vested in a board of directors, half representing industry and half representing the public interest. To prevent industry dominance of SGCC® actions, half the voting power of the board resides in the public interest directors regardless of the number of directors present at a meeting. The certification program uses approved testing laboratories under the supervision of a qualified Administrator, retained by and responsible to SGCC®, who is unaffiliated with any licensee of safety glazing materials. The licensee of a product listed in this directory has certified that the labeled material complies with the applicable specification(s). Compliance of a certified product with the applicable specification(s) is checked periodically by an approved testing laboratory under the supervision of SGCC®. All manufacturers of safety glazing products are eligible and encouraged to apply for SGCC® certification. Products may also be licensed by non-manufacturers. (See "Who Can Become a Licensee”) However, products are not certified until a test to the applicable specification(s) conducted at an approved testing laboratory indicates compliance, the SGCC® certification invoice is paid, and SGCC® License Agreements are properly executed.
July 2021
Page 16
Once certified by SGCC®, a product is assigned an exclusive certification number to identify it and the plant at which it is made. After which, to ensure continued adherence to the specification(s), SGCC® independently selects, at least twice in each year, samples during visits to the manufacturing plant or randomly from the market place to be tested to the applicable specification(s). Consequent to a test result showing compliance with the applicable specification(s) SGCC® authorizes the continued use of the certification number and the product listing in this directory. This directory is divided into three basic listings: the first is by numerical sequence of certified product numbers listing the licensee holding that number; the second is of manufacturing licensees listed alphabetically by plants and the approved products manufactured at those plants; the third is by product type listing all licensees and locations approved for each product type. The Table of Contents lists various procedural and administrative information, as well as information as to where officers and directors may be located. Upon request, information from SGCC® concerning a statement of procedures or copies of minutes are available to manufacturers, public interest groups, and individuals.
July 2021
Page 17
PROCEDURAL GUIDE (SD-07) FOREWORD The acceptance of a certified safety glazing material comes from the conviction such certification assures a high level of safety and quality, and that the integrity of the identifying mark or certification label is reliably maintained by a competent certifying agency. ANSI Z97.1, 16 CFR 1201, and CAN/CGSB 12.1 all provide sound technical basis for a high level of safety. With the addition of independent administration, plus periodic routine sampling and product evaluation, a program of product certification is maintained which provides an independent third-party certification and testing program. The Certification Program described herein is predicated upon the concept of independent and impartial administration of the certification procedures which are incorporated in the SGCC® License Agreement. The SGCC® License Agreement is the governing document for the operation of the Certification Program. The Procedural Guide, which is not an extension of this document, is for information and guidance and serves to describe administrative procedures and to ensure the uniform and equitable operation of the Certification Program.
GENERAL INFORMATION THE CERTIFICATION CONCEPT The SGCC® Certification Program is based on the conviction no standard of safety or quality is good without the continuous adherence of the licensees' certified products to that standard. To buyers, specifiers, code officials and users, the SGCC® certification label offers the licensee assurance his safety glazing material has been produced in conformance to ANSI Z97.1 and/or 16 CFR 1201 and/or CAN/CGSB 12.1. Federal law, many state statutes, municipal ordinances, and building codes require glazing materials installed in certain defined locations comply with ANSI Z97.1 and/or 16 CFR 1201 and/or CAN/CGSB 12.1. WHO CAN BECOME A LICENSEE? (Revised 10/14/2016) Any manufacturer of safety glazing materials is eligible, on a voluntary basis, to become a licensee. A manufacturer is the entity who fabricates, constructs, treats, or combines glazing materials with other materials to make a final safety glazing material. WHO CONDUCTS THE PROGRAM? The Safety Glazing Certification Council, a non-profit corporation, is the sponsor of the Certification Program. SGCC® supervises the Certification Program under which its Administrator periodically checks and reports compliance of the products having the SGCC® certification label with the requirements of ANSI Z97.1 and/or 16 CFR 1201 and/or CAN/CGSB 12.1. ADMINISTRATION Administrative Management Systems (AMS), is the independent Administrator of the Certification Program. AMS maintains the SGCC® office of certification and conducts the routine day-to-day business. All transactions are done in the name of SGCC®. HOW CAN YOU BECOME A LICENSEE? The following must be accomplished before SGCC® can certify an item of safety glazing material: a) (i) The applicant signs the SGCC® License Agreement and emails it to SGCC®. SGCC® will
countersign all copies and return one to the applicant. Non-manufacturing applicants applying on
July 2021
Page 18
behalf of a manufacturer must include the location and appropriate signatures of their manufacturer for each location. (Revised 9/19/2017)
(ii) The applicant must complete the SGCC® Application, which includes all of the necessary information for the safety glazing product(s) and return to SGCC®. (Added 7/1/2016)
b) The applicant directs an SGCC® approved testing laboratory, of its own choosing, to send SGCC® one copy of a valid test report indicating the “initial” or “prototype” samples submitted for testing are in full and complete compliance with ANSI Z97.1 and 16 CFR 1201 and/or CAN/CGSB 12.1. Reports shall only be accepted directly from SGCC® Approved independent laboratories. Test reports are valid for initial certification if the report date is within 60 days. (Revised 9/19/2017)
c) The applicant sends to SGCC® the certification fee for each item to be certified. (Revised 11/4/2015) d) (Deleted 10/21/2007) e) If the Licensee has certified product with SGCC during the prior 24-month period and has had all
products decertified by SGCC or has voluntarily decertified all products, an audit must be performed by the Administrator’s representative and any corrective actions resulting from such audit resolved (Added 9/19/2017)
Having received all of the above items, SGCC® sends to the licensee the notice of product certification which includes an SGCC® certification number. This number must be incorporated into the permanent label affixed to each piece of certified safety glazing material. The certified item will be listed in the next edition of the Certified Products Directory. QUALITY ASSURANCE PROGRAM (Revised 10/4/2018) SGCC® requires licensees to have a working quality assurance program for the fabrication of safety glazing. Compliance to quality assurance requirements will be validated at the first plant inspection after products are certified. Adherence is verified during twice per year plant visits. These requirements were adopted to improve the overall quality and reliability of safety glazing products in the program. These requirements are in addition to the ANSI, CPSC and CAN/CGSB 12.1 compliance testing required by the SGCC® certification program. The intent is to enhance the quality of products produced in the interim production periods between test cycles. Although a quality assurance program is a fundamental element of good fabrication practices, only successful testing to ANSI Z97.1, 16 CFR 1201 or CAN/CGSB 12.1 is valid proof of compliance with these standards. Quality Assurance Requirements:
1) A Quality System Manual – A quality manual shall be present that documents, identifies, describes and contains the workings of the quality system, and as a minimum contains the following sections:
a. Designated Person for Quality Assurance b. Process Control (Procedures) c. Production Testing d. Calibration
2) Designated Representative for Quality Assurance – The manufacturer shall designate a
person who is responsible for the quality system function in the manufacturing facility.
3) Process Control - The individual areas involved in the fabrication of safety glazing shall be defined. Each area shall have documented procedures.
4) Production testing – Procedures shall describe testing of regular production and shall
include SGCC requirements for safety glazing products. The SGCC auditor shall 1) review historical testing records ensuring procedures were followed if failure occurred 2) witness at least one production test and 3) review the method of evaluation during twice per year visits. When samples are not available, the manufacturer shall describe to the auditor how production testing is performed. Where ANSI or ASTM test methods are referenced below, other like national or internationally accepted test methods (for example EN 12600) are acceptable. Records of testing shall be maintained for a minimum of 10 years.
July 2021
Page 19
a. Tempered – ANSI Z97.1 Center Punch1 and/or Impactor1 Test - As a minimum, testing shall occur on the first of each product thickness per shift. Additional testing may be appropriate.
b. Laminated – ASTM F30071 and/or ANSI Z97.1 Impactor Test - During regular
production periods, a minimum sample collection shall be performed weekly, and actual testing occur at least monthly. Sample collection must be traceable to specific production runs. For ASTM F3007 testing, sampling and testing shall occur as a minimum on the thinnest product(s) produced. Evaluation shall occur and drop height selection as a minimum shall be in accordance with ASTM F3006.
c. Products other than Tempered or Laminated - Testing procedures shall be
established and accepted by the SGCC Administrator.
5) Calibration - Test equipment used in the quality inspection process must be working properly and accuracy assured. Equipment shall be 1) identifiable, 2) records of the calibration maintained, and 3) a method shall exist for monitoring at least an annual calibration
HOW THE CERTIFICATION PROGRAM WORKS (Revised10/1/2020) Safety glazing materials must meet or exceed the applicable specification(s) before they can be certified by SGCC®. After initial certification (see “How Can You Become a Licensee”), the administrator verifies the production at the licensee’s manufacturing location during twice per year audits. In consideration of public health concerns one or both of the twice per year audits can be conducted virtually. During each audit, the licensee’s compliance to SGCC’s Quality Assurance Program is validated. During these audits, independent routine test sample selection is performed as well as review of proper labeling practices. All tests are conducted by SGCC® approved testing laboratories. All laboratories, whose test reports are utilized by the Certification Program, shall be approved by the SGCC® Certification Committee. Initial or prototype tests are performed at an approved testing laboratory selected by the licensee. An approved testing laboratory selected with the concurrence of the Administrator by the licensee, tests routine evaluation samples. ADMINISTRATOR AUTHORIZES CERTIFICATION As sole judge of compliance with the applicable specification(s), the Administrator authorizes a product, which has been approved to be listed in the Certified Products Directory (CPD). Licensees label safety glazing material, with the assigned SGCC® number, within the limits of the product size tested. If 34 by 76 inches (34x76) is the size of the initial or prototype test sample, certification is extended to all sizes and the permanent label contains the letter “U”, designating unlimited size. The letter “L” contained within the permanent label denotes certification is limited to the width and length of the initial or prototype test sample. PRODUCTS LISTED IN CERTIFIED PRODUCTS DIRECTORY (Revised 10/14/2016) Approved products are listed in a Certified Products Directory (CPD). The directory is published every six months and is sent to door, sash and building products manufacturers, glazing contractors, home builders, architects, regulatory agencies, code-making groups, etc. Directory listings contain the licensee's name, plant location, and product description of safety glazing material certified by SGCC®.
1 Please contact SGCC at [email protected] or visit the SGCC website (https://www.sgcc.org/Miscellaneous-Forms-and-Information.aspx) for additional information including equipment details and purchasing options for this equipment
July 2021
Page 20
The Administrator selects, at least twice in each year, samples of certified safety glazing material to be tested to the applicable specification(s). These samples are selected during visits to the manufacturing plant or from the marketplace. COMPLIANCE SAFEGUARDS HOW IS COMPLIANCE ASSURED (Revised 11/4/2015) Any certified product determined, in the course of routine sampling and evaluation, not in compliance with the applicable test specification(s), is upon first failure, subject to the retest requirements of guideline G.11. Should the G.11 retest fail to comply, the product shall be subject to the removal of certification. After the 2nd consecutive failure, the licensee is given 7 days in which to demonstrate to the satisfaction of the Administrator compliance, and if not, certification is automatically withdrawn at the end of the 7-day period. When any program, audit or quality assurance requirements are found to be in non-compliance, the licensee is sent a request for corrective action giving 30 days in which to demonstrate to the satisfaction of the administrator, compliance with requirements. If the licensee does not respond, a warning of possible removal of authorization to use the SGCC® permanent label is sent giving an additional 30 days to respond. If the licensee does not respond acceptably, authorization to use the SGCC® permanent label is automatically terminated at the end of the second 30-day period. (Revised 11/4/2015) CHALLENGING A CERTIFIED PRODUCT (Deleted 10/1/2014) COMPLAINTS AND/OR APPEALING A CERTIFIED PRODUCT (11/03/2015) Negative feedback, from any source, on any aspect of the certification program or program administration that requires a response will be deemed a Complaint that requires a response. A complaint that challenges the conformance of any safety glazing product to program requirements shall be deemed an Appeal, whether by a licensee or by a consumer or other third party. Complaints or Appeals must be in writing and are first handled by the Administrator following the below procedure:
1) Complaints and Appeals are logged for tracking. 2) Notification of receipt and of the Complaint and Appeal process is sent to the initiating party. 3) Information from all involved parties is gathered. 4) All information is reviewed, and a determination is made by the Administrator. 5) Notification is sent to all involved parties of the outcome. 6) All Complaints and Appeals are reviewed in a timely fashion and once resolved are marked as such.
To help determine how to best handle a Complaint or Appeal, they may be categorized by the type of party initiating the Complaint or Appeal, either from a Business (i.e., licensee, competitor, or industry party), Consumer (i.e. end user or retailer), or Program Participant (i.e. participant, supplier, or licensee). The Administrator will discuss and work with the initiating party to determine coverage of costs associated with handling the Complaint or Appeal (this can be waived at the discretion of the Administrator or SGCC President). Once costs are agreed upon, the Administrator will investigate and make a determination. If the Administrator’s determination is in favor of the complainant or appellant, then any costs associated will be borne by the involved licensee, SGCC, or the Administrator. If the Administrator disagrees with the complainant or appellant, then the initiating party is responsible for any costs. Determinations by the Administrator can be contested and if they are, the matter will be sent to the SGCC Quick Action Committee for determination. If the Quick Action Committee’s determination is contested, then the matter is sent to the Certification Committee for final determination and resolution. No further appeal is permitted from the decision of the Certification Committee. WITHDRAWAL OF CERTIFIED PRODUCT Any product which has been certified by SGCC®, may be voluntarily withdrawn from the Certification Program by a licensee at any time. See G.23 for more information.
July 2021
Page 21
COSTS WHAT DOES THE PROGRAM COST? The licensee pays, in advance, all projected fees for future routine evaluations to SGCC® on a six-month basis. A licensee is invoiced for each certified item separately listed in the Certified Products Directory. The certification period is from January 1 - June 30 or July 1 - December 31. The licensee's initial invoice will be determined by the payment schedule as is listed below. All subsequent invoices will be for a full certification period.
DATE
ADMINISTRATIVE/BUSINESS
ACCOUNT FEE
TEST FEE
January 1 - March 31
100%
None
April 1 - June 30
50%
None
July 1 - September 30
100%
None
October 1 - December 31
50%
None
Test reports are valid for initial certification if the report date is within 60 days. (Revised 11/4/2015) Initial certification during the first three months of the initial six-month period will require a selection in the first three months of the following six-month certification period. CERTIFICATION PROGRAM DOCUMENTS AND AGREEMENTS LICENSE AGREEMENT This agreement, incorporating independent program administration and routine periodic independent sampling and evaluation, governs the relationship between SGCC® and the licensee. Future amendments or revisions to the License Agreement will be recommended by the SGCC® Certification Committee and enacted by the SGCC® Board of Directors. EFFECTIVE DATE, DURATION AND TERMINATION The License Agreement, effective from the date of its execution, has a validity of six months (adjustable to a January 1 to June 30 or a July 1 to December 31 basis) and, unless revoked by SGCC® for causes set forth in the document, is automatically renewed for successive additional periods of six months, unless either party gives notice at least 60 days prior to the date of expiration that cancellation is requested. Upon its proper execution and acceptance by SGCC®, the Pre-issued Certification Number Bond (SD-06) informs a licensee of the certification number of an item to be certified in the future. If the licensee marks production with the certification number prior to actual certification, the bond is forfeited to SGCC®. Upon its proper execution and acceptance by SGCC®, the test release bond permits the continuation of certification of an item when production facilities are shut down. If the licensee does not notify SGCC® within one week of the resumption of production, the bond is forfeited to SGCC®. ADMINISTRATIVE SERVICE AGREEMENT This agreement entered into by SGCC® and AMS governs the relationship between SGCC® and AMS, the independent Administrator. In general, it provides that the Administrator
July 2021
Page 22
a) samples certified products routinely;
b) has the right to witness any and all testing required by the program;
c) reviews all test reports in order to determine compliance of the certified product with the applicable specification(s);
d) inspects and approves all in-plant and test laboratory test facilities for use in this Certification Program (test laboratories are approved by the SGCC® Certification Committee);
e) publishes (hard copy and/or electronic) the SGCC® Certified Products Directory on or about January 1 and July 1 of each year;
f) handles all routine clerical duties of SGCC® with respect to certification matters;
g) acts as SGCC® treasurer, invoices licensees, maintains a bank account, and disburses funds (fiscal reports are made to the SGCC® Certification Committee);
h) furnishes all testing, except for initial or prototype tests;
i) attends all scheduled meetings of the SGCC® Certification Committee; and
j) in all of its actions, acts in the name of SGCC®. CERTIFIED PRODUCTS DIRECTORY This directory contains a listing of the certified safety glazing materials of each licensee. CERTIFICATION LABEL The certification label, containing a number that refers to the listing in the Certified Products Directory, is permanently affixed to each piece of certified safety glazing material by the licensee. The listing in the directory provides a complete product description including licensee's name, location, etc. PROGRAM RESPONSIBILITY The SGCC® Board of Directors has overall responsibility for the well being and acceptance of the Certification Program by industry, building officials and the public. It also bears corporate legal responsibility. The SGCC® Certification Committee has the responsibility for the general procedure and policy pertaining to the conduct of the Certification Program. As a part thereof, it: a) establishes certification "guidelines"; b) determines, where a question is raised by a licensee or the Administrator, the applicability of the
specification(s) in specific situations; c) approves testing laboratories; d) determines which specifications are to be designated effective for the purposes of product
certification and the date or dates on which they become effective; and e) recommends to the SGCC® Board of Directors changes to be made in the license agreement.
July 2021
Page 23
CERTIFICATION GUIDELINES AND INTERPRETATIONS For guidance in certifying safety glazing materials, the SGCC® Certification Committee has adopted the following: GENERAL G.1 Participation in the Certification Program will be on a January 1 to June 30 and July 1 to December 31 basis. G.2 Tests for initial compliance of safety glazing materials to ANSI Z97.1 / 16 CFR 1201 plus CAN/CGSB 12.1 will be accepted from any testing laboratory approved by the SGCC® Certification Committee. (Revised 7/1/2016) G.3 (Deleted 11/4/2015) G.4 For insulating glass units to be considered safety glazing material, each lite in the construction must be of safety glazing material. G.5 The SGCC® item number, when used as part of a permanent label, designates the name of the licensee (participant) and also the location of the manufacturing plant. G.6 a) All test specimens, except prototype samples, must be marked with the correct SGCC® permanent
label prior to testing in order to be considered a valid sample. It is the responsibility of the licensee to ensure the specimens being represented to the Administrator's representative are properly labeled. The Administrator shall construe the absence of a correct permanent label as a failure to comply with the specifications. In such case of noncompliance, Sections a and c of G.11 shall be followed. (Revised 3/16/1990, updated 10/2/2014)
b) The laboratory shall verify that the label complies with SGCC® labeling requirements. (Revised
10/15/2008) c) The testing laboratory is to advise the Administrator of any specimen to which the correct SGCC®
permanent label is not affixed. The testing laboratory will be instructed by the Administrator not to test but hold the sample.
d) The Administrator will inform the licensee of the situation and direct (by letter) the testing laboratory
to commence testing no later than 30 days hence. Although this set of samples will already be considered as noncompliant with label requirements, test specification testing will still occur for information only, unless otherwise requested not to be tested by the licensee. Until that time, the testing laboratory is instructed to make these specimens available to the licensee at their convenience (the specimens are to remain at the testing laboratory) in order that the licensee may point out or show them that in fact the SGCC® permanent label is correct or agree that in fact the correct SGCC® permanent label is not present. In cases of any dispute between the licensee and the testing laboratory the decision of the Administrator shall be final. The licensee shall not mark specimens after receipt at the testing laboratory.
e) Effective with the last of 2016 (L16) certification period, the SGCC® permanent label, if looking to
certify ANSI, must contain ANSI Z97.1-2015 in order to be considered a correct permanent label for purposes of Guideline G.6. (Revised 7/1/2016)
G.7 Safety glazing materials for which certification is requested for indoor use only shall be subjected to the provisions of section 4.4 (impact tests) and 5.4.3 (aging tests) of ANSI Z97.1 irrespective of the composition or construction of the glazing material. Like products and materials produced in the same manner as samples
July 2021
Page 24
submitted for test shall be legibly and permanently marked in one corner with the words "Indoor Use Only" and the SGCC® identification number (section 6.3.1). G.8 (Deleted 4/29/2010) G.9 (Deleted 7/1/2016) G.10 (Revised 12/7/2018) In cases where the Administrator samples and identifies specimens for routine evaluation of the licensee's premises or requests licensee's samples when none are available at the time of sampling: a) The licensee is permitted six (6) weeks in which to effect delivery of said specimens to the
Administrator's designated testing laboratory. For laminated glass, specimens must be the thinnest interlayer and the thinnest product certified in each thickness class (S and/or H) and generic interlayer category.
b) Failure to act as specified above shall be construed by the Administrator as failure of said specimens
to comply with the specifications and the Administrator shall act as provided for in license agreement A.6.
G.11 (Revised 10/2/2014) In cases where a routine evaluation sample fails to comply with the specifications: a) Written notice and an invoice shall be sent to the licensee by the Administrator stating that within 30
days from the date of such notice the licensee must submit a retest (RT) sample to the testing laboratory selected by the licensee with the concurrence of the Administrator.
Certification shall be removed if the sample and payment are not received within the allotted 30 days or if the sample submitted fails to comply with the specifications.
b) All costs related to G.11 are to be borne by the licensee. c) If the retest procedure is required, all routine inspections and sample selections will continue.
However, routine testing for the next period will be suspended pending the outcome of the retest procedure. If the product is decertified, the prepaid fee for routine testing for the next period (but not the Administrative and Contingency fees) will be refunded.
G.12 If a licensee who manufactures or contracts for the manufacture of a certified product outside the United States and Canada feels that in a particular instance that he will be unable to act as provided for in paragraph (a) of SGCC® Guideline G.11, he should notify the Administrator. The Administrator will then contact the chairman of the certification committee for a decision as to what action is to be taken. G.13 (Deleted 5/6/1999) G.14 The semi-annual invoicing date for certification fees shall be April 1 and October 1 of each year and the Administrator is instructed to take those steps necessary to remove certification from licensees for failure of payment. (Modified 10/20/1989) The Administrator shall initiate de-certification procedures on products for a given licensee's failure to pay any monies due to SGCC® within 60 days of invoice date. (Reference License Agreement A.2, A.7, A.12, and B.6.) The invoice procedures will be as follows: a) Semi-Annual SGCC® invoices will be mailed/emailed on or before April 1 and October 1 of each
year. Payment is due May 1 and November 1 respectively.
July 2021
Page 25
b) For all overdue invoices, as of May 1 and November 1, a phone call will be made as a reminder and to ensure that the licensee received the invoice. An email will follow the phone call.
c) For all overdue invoices, as of May 15 and November 15, an email will be sent warning of de-certification if payment is not received within 15 days.
d) Letters of de-certification will be sent fifteen (15) days from the warning notification if payment is not received. With de-certification, a licensee will no longer be an SGCC® participant and all of its certified products will be de-certified and will not appear in the CPD.
G.15 (Deleted 10/2/2014) G.16 The nominal thickness designations in SGCC® authorized permanent labels for safety glazing materials may be shown in metric units. The thickness will be expressed in millimeters, limited to one decimal place, and will have the suffix "mm." (Revised 4/19/2004) G.17 (Deleted 7/1/2016) G.18 Certified and permanently labeled safety glazing materials such as laminated glass, rigid plastic, or organic coated glass, may be cut into smaller pieces by a distributor or installer after manufacture and it is not practical for each smaller piece to bear a manufacturer’s permanent label when finally installed in a building. When this is the case, the distributor or installer shall apply a permanent label to each piece which states his name and certifies that he cut the piece from material that was properly labeled in accordance with the requirements of SGCC® (refer to “SGCC® Label Requirements” for additional information). (Revised 10/25/2001) For the purpose of this guideline, a permanent label is defined as one that will remain permanently legible and would be destroyed in attempts to remove it from the product. G.19 (Deleted 10/20/1989) G.20 (Deleted 4/26/2007) G.21 A pre-issued SGCC® certification number shall be issued by the Administrator upon receipt of a properly executed License Agreement and a properly executed New Licensee Application & Pre-Issued Number Form (SD-06) (application). The application must be completed for any new safety glazing product(s) (prototype) the fabricator submits for testing. If the fabricator requests pre-issued certification number(s) and does so with the understanding that these numbers (SGCC Mark/label) will not be applied to any product(s) until authorization to do so by SGCC®. The fabricator will not be authorized to use the number(s) until testing, final approval and formal certification is complete. (Revised 7/1/2016) G.22 In the case of plastics and organic coated glass certification of a patterned product may be extended to cover other patterns provided: a) The nominal thickness of the proposed alternate and all aspects other than pattern are the same as
the certified product. b) The Administrator of the certification program is provided with a copy of a prototype test from an
approved laboratory, showing satisfactory compliance with the impact requirements of ANSI Z97.1 for each alternate pattern proposed.
c) The certification committee is provided with a 6 inch by 6 inch sample of each proposed alternate for
its record and file. This must be sent to the Administrator of the certification program. After admission under blanket certification covering patterned products, any such patterns available may be selected by the Administrator for routine sampling and testing.
July 2021
Page 26
In the case where a routine evaluation sample covered under a blanket certification fails to comply with the specifications, the situation requires that the particular product be submitted for the retest (RT) sample required by Guideline G.11. (Revised 7/1/2016) G.23 There may be instances when a production facility is temporarily inoperative. This could be caused by, but not limited to, equipment repair or replacement, labor difficulties, energy or material shortages, or economic considerations. Consequently, samples for routine testing may not be available for long periods. The licensee may desire to retain certification during the shutdown period by applying for inactive (IN) status. This shall be done as follows: a) Prior to or within two (2) weeks after the shutdown, the licensee shall inform the SGCC®
Administrator in writing. b) The SGCC® Administrator will immediately supply the licensee with test release bond forms (SD-23)
for submission by the licensee. A separate bond shall be submitted for each certified product affected.
c) Within two (2) weeks, after receipt of the bond forms, the licensee shall submit them to the SGCC®
Administrator. d) During the period covered by the bond the licensee shall retain certification, contingent upon payment
of normal certification fees and meeting all other licensee obligations. Bonds will be for a specific certification period and will expire at the end of that certification period but may be renewed by the licensee any number of times. Renewal is an obligation of the licensee and requires all steps listed herein. (Revised 10/25/2001)
e) Within one (1) week after re-activation of the production facility the licensee shall 1) notify the
SGCC® Administrator in writing, and 2) submit samples from the first weeks production to an SGCC® approved laboratory for testing. In cases where more than one certified product is produced with the same equipment, samples of each must be furnished for testing within the first month. These will be considered as the routine samples for retesting for the six months period during which they are submitted.
f) Failure of the licensee to comply with any of the preceding shall be the basis for removal of
certification from the affected products. G.24 When a licensee's production equipment will not produce a size of 34 inches by 76 inches and the licensee wishes to certify a) a size whose smaller dimension exceeds 34 inches, material shall be tested whose smaller dimension is 34 inches, or b) a size whose larger dimension exceeds 76 inches, material shall be tested whose larger dimension is 76 inches. G.25 (Deleted 7/1/2016) G.26 Any label that can be removed intact shall not be considered permanent and is not acceptable to SGCC®. G.27 A licensee at time of prototype submission should determine if certification shall be for ANSI / CPSC (Composite) OR Composite plus CAN/CGSB 12.1 (COMP+CAN). The licensee shall be issued only one SGCC® number for composite certification for each product. The licensee will submit four (4) samples to be impact tested to ANSI Z97.1 and CAN/CGSB 12.1 (for all specimens that are not symmetrical from surface to surface an equal number of specimens shall be impacted on each side). If any one specimen of the composite sample fails, the entire composite sample will be considered to have failed to comply with the standards. (Revised 7/1/2016)
July 2021
Page 27
G.28 The Administrator shall construe noncompliance with thickness tolerance as a failure to comply with the specifications. In such cases of noncompliance, Sections a, b and c of G.11 shall be followed. (Revised 10/2/2014) G.29 For the purposes of certification, the thickness requirements of Standard ASTM C1036, CEN or other nationally or internationally recognized thickness specifications shall apply. In all cases label information must be accurate for the nominal thickness of the applicable Standard. An indicator shall be used to identify Standards other than ASTM C1036 (e.g., EN for European Norm). If no indicator is used, the product will be assumed to comply with ASTM C1036. (Revised 10/15/2008) (See Certified Products Key) G.30 (Deleted 10/5/2004) G.31 (Deleted 10/5/2004) G.32 (Deleted 7/1/2016) G.33 If a manufacturing plant for which a product is certified is sold, the new owner or licensee must take the following steps to maintain certification: a) Notify the Administrator in writing of the sale as soon as possible (and in no event later than 60 days)
after the sale;
b) Execute a new license agreement, if the new owner is not already a licensee; and
c) Exercise the option of maintaining the original licensee's SGCC® number(s) or requesting new numbers. If the new owner chooses to keep the existing number(s), the logo on the certified product must clearly distinguish it from the previous owners.
The Administrator shall arrange for the next routine sampling to take place within six (6) months of the sale. If the plant is temporarily inoperative in connection with the sale, the provisions of G.23 shall also apply. G.34 Samples of any shape or shape altering process such as notches or holes shall be covered by the certification of the base rectangular product. Certification to “U” unlimited size may be any size. Certification to “L” limited size requires that the shape must fit within the outline of the largest certified size. (Added 4/26/2007) G.35 Once certified by SGCC®, a product is assigned an exclusive certification number to identify it and the plant at which it is made/fabricated. An SGCC Licensee shall notify SGCC prior to a plant’s physical relocation. Relocation requires certification as a new plant and will require new SGCC numbers and testing at the new plant prior to granting of the new certification. Consistent with the SGCC License agreement and procedural guide, fabrication and labelling must occur at the same facility. (Added 10/10/2019) TEMPERED TRANSPARENT GLASS T.1 Certification of either flat glass or patterned glass will not cover the other except as noted in Guideline T.2. (Flat glass designates ground and polished plate, float and sheet glass.) (Revised 7/1/2016) T.2 Polished plate glass and the rough glass blank from which it is produced will be considered to be of equal nominal thickness. Certification of tempered flat glass will therefore be interpreted as including tempered rough plate blank.
July 2021
Page 28
T.3 Certification of regular tempered glass will also cover tinted, heat absorbing, and coated glasses of the same nominal thickness where the coating does not alter substantially the post-breakage behavior of the glass substrate. A "substantial alteration" is one that would render the coated tempered glass in non-conformance with the applicable safety glazing standards. Glasses of the same nominal thickness with a ceramic or other material applied as a continuous or partial coating to one or more surfaces are also covered. (Modified 04/02/1992) T.4 In cases where certified glass is normally not available for sampling, the licensee may make an overrun (of four lights of prototype size that are to be marked with the date of production) when the item is in normal production, and these will be accepted by the Administrator if other samples are not available. Otherwise, when production samples are not available, the Administrator shall notify the licensee to submit prototype size samples to the Administrator within six (6) weeks. T.5 Certification of any nominal thickness of tempered safety float or sheet glass will also cover the other types. ANSI Z97.1, 16 CFR 1201 and CAN/CGSB 12.1 do not require the permanent label on tempered safety glass to specify which type of glass is used. Nor is it required that the test specimens be identified in this regard. (Revised 10/10/2012) T.6 Bent Glass shall be certified separately from flat glass. Bent glass test methods shall be the same as for flat sample testing except as referenced in the text and figures of the ANSI Z97.1 standard. Interpretation of results shall be the same. (Revised 10/21/2005) T.7 For purposes of impact test evaluation when breakage occurs, the average thickness of a tempered glass specimen containing grooves, bevels and other thickness altering fabrication shall be considered the average of the thinnest measurement of each of the ten (10) geometrically largest particles. This average thickness will then be used to determine the maximum allowable weight of the ten (10) largest particles. Upon successful completion of testing the thickness for the specimen shall be listed in the CPD as the thickness of the non-fabricated base glass. SGCC® views glue chip, beveling, grooving, and acid etching as a fabrication process prior to tempering, and as such is not certified separately from the base glass thickness. (Example: Certification of 3/16” TTG would also cover 3/16” glue chip or beveled product.) (Revised 10/01/2002) TEMPERED PATTERNED GLASS TP.1 For the purposes of certification, the nominal thickness of patterned, figured, or rough rolled glass are the common fractions found in ASTM C1036 or other nationally or internationally recognized thickness standards and the thickness should be measured in accordance with the procedure as described in ASTM C1036, current revision. The permanent label must contain this fraction on a metric or decimal dimension within the tolerance of this thickness as published in ASTM C1036 or other nationally or internationally recognized thickness standards. (Revised 7/1/2016) The patterns in each thickness will be classified as to the ratio of minimum to maximum thickness as follows:
Patterned Depth Class Ratio Shallow patterned glass 0.90 or above Medium patterned glass 0.80 through 0.89 Deep patterned glass 0.79 or below
Certification will be by nominal thickness and patterned depth class. Any pattern in a certified thickness and patterned depth class is certified.
July 2021
Page 29
New or unlisted patterns must be submitted to the pattern subcommittee for classification and file prior to certification. After measurement, the new pattern will be assigned to a patterned depth class. (See Classified Tempered Glass Patterns Key table in this directory). Certification of deep also covers medium and shallow patterns of the same nominal thickness. Certification of medium also covers shallow patterns of the same nominal thickness. TP.2 The maximum thickness shall be recorded when measuring the thickness of patterned glass. TP.3 For tempered patterned glass, one (1) specimen must be weighed and the weight of ten (10) square inches determined from the weight, width and height of that specimen to use for test purposes. TP.4 (Deleted 10/5/2004) TP.5 When medium patterned glass is not available for routine sampling, the licensee submitted specimens must be a medium pattern (a shallow pattern is not acceptable). TP.6 When deep patterned glass is not available for routine sampling, the licensee submitted specimens must be a deep pattern (shallow or medium patterns are not acceptable). LAMINATED GLASS L.1 Initial certification of Laminated Glass - Testing must be performed on each nominal thickness of at least one brand of each generic category of interlayer material for which SGCC® certification is desired. Ongoing certification shall be by two thickness classes (S=Standard (<0.292 inches) and H=Heavy (0.292 inches and greater)) and per generic category of interlayer. A list of accepted interlayer brands per generic category shall be maintained by SGCC® (SGCC® List of Accepted Interlayers can be found at www.sgcc.org) Certification to one brand within the generic category will allow switching to other brands within the generic category on the list. (see "Guidance for the SGCC® Certification of Laminated Glass" dated May 21, 2019 available at www.sgcc.org) (Added 4/2/2008) L.2 (Deleted 12/7/2018) L.3 (Deleted 4/2/2008) L.4 (Deleted 12/7/2018) L.5 Laminated safety glass shall be identified and certified by two (2) types, Laminated Transparent Glass (LTG) and Laminated Specialty Product (LSP).
a) Laminated Transparent Glass (LTG) is defined as two (2) or more lites of glass with the same family of polymer (interlayer(s)) between the lites.
b) Laminated Specialty Product (LSP) is defined as two (2) or more lites of glass or other material with multiple interlayers, same or different family, with an insert (other layer of sheeting or non-continuous material) encapsulated in between the interlayers.
For Laminated glass changes and equivalency see Table L1. (Revised 12/7/2018)
July 2021
Page 30
L.6 Thickness of the interlayer shall be measured by the SGCC® standard method. (Revised 4/2/2008) L.7 Nominal thickness for laminated glass has been expanded from standard ASTM C1036 values to eliminate “gaps” in ranges. For certification purposes, the following thickness tolerances shall be used. Thickness tolerance shall apply only to the overall thickness. Interlayer thickness shall be reported. The reported value shall be used to determine "nominal" thickness of the interlayer, with a maximum allowable minus tolerance of 0.005 inches. (Revised 11/4/2015)
mm Range (mm) Traditional (in) Range (in) 3.0 2.92 – 3.78 1/8 0.115 – 0.148 4.0 3.79 – 4.57 5/32 0.149 – 0.179 5.0 4.58 – 5.56 3/16 0.180 – 0.218 6.0 5.57 – 7.41 1/4 0.219 – 0.291 8.0 7.42 – 9.01 5/16 0.292 – 0.354 10.0 9.02 – 11.91 3/8 0.355 – 0.468 12.0 11.92 – 15.11 1/2 0.469 – 0.594 16.0 15.12 and greater 5/8 0.595 and greater
Laminated Glass Equivalency (Table L1) As inserts are referenced below, there shall be no adverse reaction of inserts with accepted interlayers. Fabricator
maintains sole responsibility for establishing compatibility, durability and retention of impact properties for all materials used in any laminated composite or encapsulated interlayer system.
Change Categories Equivalent Changes Not Equivalent Changes Interlayer generic category
Different brand of same generic category (see guideline L.11)
Different generic category
Interlayer thickness Increase in interlayer thickness (As long as overall thickness remains within range of certified product).
Decrease in interlayer thickness (maximum allowable minus tolerance of 0.005 inches)
Glass/glazing Flat, patterned or bent glass Change from glass to plastic or plastic to glass
Glass fabrication (A, HS, T, CS) See guideline L.8 N/A Dimensional tolerances (Glass and Interlayer)
(See Guideline L.1 and L.7) N/A
Inserts or changes in material of plies or inserts (generic make-up)
If insert is encapsulated and interlayer is accepted and of the minimum thickness of acceptance on each side of the insert
If insert is not encapsulated, or interlayer is not accepted or of minimum thickness on each side of insert
Additional layers of same type
Increase in layers (As long as overall thickness remains within range of certified product).
Decrease in layers
Coatings or Color (interlayer or glazing)
Changes in tint, translucence, or coated glass
N/A
Decorative pattern (not to be confused with patterned glass)
Changes in decorative pattern (glass or inserts), follow direction for change of insert
Lower than tested minimum interlayer thickness on either side of the insert or non-accepted interlayer
Electronics, plastics or other devices
Encapsulates, Follow requirements for accepted interlayer and minimum thickness on both sides of inserts
Lower than tested minimum interlayer thickness on either side of the insert or non-accepted interlayer
July 2021
Page 31
L.8 Laminated glass shall be certified by its base glass heat treating/fabrication process (A= annealed, HS= heat strengthened, T= tempered, CS= chemical strengthened). When a laminated annealed glass (A) is tested and certified, other laminated glasses having the same nominal thickness or thicknesses of heat strengthened (HS), tempered glass (T), or chemical strengthened (CS) and the same or greater thickness of interlayer of the same generic category will be considered to be included in the certification. Testing of heat strengthened (HS) will only certify heat strengthened (HS) and tempered (T). Testing of tempered (T) will only certify tempered (T). Testing of chemical strengthened (CS) will only certify chemical strengthened (CS). (Revised 12/7/2018) L.9 (Deleted 12/7/2018) L.10 For certification to ANSI Z97.1, weathering tests on laminated glasses shall be performed on the thinnest construction of all components in clear glass with clear interlayer. Weathering tests shall only be required initially. Weathering data will be accepted from the glass fabricator, or a supplier, i.e. interlayer manufacturer. Since SGCC's acceptance of weathering data is a "one-time" event, no formal weathering lab approval will be required. However, at time of weathering data submittal, the weathering test facility shall submit an explanation why they are competent to perform such tests. Justification of competence shall be judged on any facility's history and experience. (Revised 1/30/2012) L.11 An SGCC® certified participant may use any interlayer supplier on the SGCC® Accepted interlayer List of the same generic category. (Added 4/2/2008) WIRED GLASS (ANSI ONLY) W.1 (Deleted 11/4/2015) PLASTICS - GENERAL (ANSI Only) P.1 Certification of one tint or color of rigid plastic will also cover other tints, colors, flat configurations, or bent and formed configurations. P.2 For certifying all plastics covering a range of thicknesses, prototype impact tests are required of the minimum thickness and also of the maximum thickness (except that 0.250 inch thickness would be tested if the maximum thickness exceeds 0.250 inches). Only one certification number will be issued and shall be marked upon all thicknesses. Routine evaluation samples are to be selected by the Administrator from any of the certified thicknesses. P.3 The following thickness tolerances shall be used for certification purposes:
• Outdoor use plastic materials Categories C-1 and C-2 cast Acrylic, (including continuously cast sheet): As specified in ASTM-D4802-16, Table 2 and Table 3.
• Outdoor use plastic materials Categories M-1 and M-2 extruded Acrylic: As specified in ASTM-D4802-16 Table 2 plus or minus five percent.
• Outdoor use plastic materials extruded polycarbonate: As specified in Military Specification MILP-46144, latest issue.
• Indoor use plastic materials plus or minus five percent of nominal thickness. P.4 The maximum thickness shall be recorded when measuring the thickness of patterned plastics. P.5 Certification of either smooth plastic or patterned plastic will not cover the other.
July 2021
Page 32
PLASTICS - EXTERIOR USE (ANSI Only) PE.1 (ANSI ONLY) Sheet plastics for exterior use must comply with the applicable specification. PE.2 Certification of plastics for exterior use shall be permitted prior to completion of ANSI Z97.1 weathering tests (section 5.4) provided that a considered expert opinion states that the infrared spectrogram indicates that the plastic is an acrylic or UV, inhibited polycarbonate of proven weatherability. Certification shall be removed if compliance with the weathering test is not demonstrated within six months of the certification date. PE.3 For all plastics requiring UV weathering tests, an infrared spectrogram shall be obtained of all prototype weathering specimens. An infrared spectrogram shall be obtained of all routine evaluation samples and shall be compared with that of the prototype in lieu of conducting weathering test. The spectral scan shall be made using a minimum film thickness of 0.002 inches or its equivalent. PE.4 When initial Charpy unnotched specimens do not break, then notched specimens shall be used for both initial and exposed Charpy impact testing. The specimens shall be notched prior to UV exposure and the notched surface shall be exposed to the UV. PLASTICS - INDOOR USE ONLY (ANSI ONLY) PI.1 Sheet plastics used in indoor applications only do not have to comply with paragraph 5.4.1 of ANSI Z97.l (UV Weathering) but must comply with paragraph 5.4.3. PI.2 The permanent label authorized by SGCC® must include "Indoor Use Only." PI.3 For all indoor plastics requiring aging tests, an infrared spectrogram shall be obtained of all prototype aging specimens. An infrared spectrogram shall be obtained of all routine re-evaluation samples and shall be compared with that of the prototype in lieu of conducting aging tests. The spectral scan shall be made using a minimum film thickness of 0.002 inches or its equivalent. LEADED PATTERNED ANNEALED GLASS – (ANSI ONLY) LG.1 (Deleted 4/26/2007) LG.2 (Deleted 4/26/2007) LG.3 (Deleted 4/26/2007) ORGANIC COATED GLASS AG.1 Thickness of the applied plastic coating shall be measured by the SGCC® standard method. When testing to the impact test criteria in 16 CFR 1201.4(a)(1), four specimens shall be tested or as noted in guideline G.27. (Revised 10/22/1993). AG.2 The SGCC® authorized permanent label, which complies with Guideline G.26, must be imprinted upon or applied to a surface of the plastic for all plastic coated annealed glasses. AG.3 (ANSI ONLY) Prototype test shall be conducted on bent specimens of the surface area at least 50 percent of the maximum size for which certification is desired. Routine tests may be conducted on flat or bent specimens. The test
July 2021
Page 33
apparatus shall be modified to clamp the vertical straight edges and to support the concave side for the curved edges. Two specimens shall have organic coating on the concave surface and two on the convex surface. Impact shall be on the convex surface. AG.4 For certification to ANSI Z97.1, weathering tests on organic coated glasses shall be performed on the thinnest construction of all components in clear glass with clear plastics. Weathering tests shall only be required initially. Weathering data will be accepted from the glass fabricator, or a supplier, i.e. organic coating manufacturer. VACUUM INSULATING GLASS (VIG) See most recent memo “VIG ANSI Interpretation and Information” at www.sgcc.org or contact the SGCC office. CHEMICALLY STRENGTHENED SAFETY GLASS (CSSG) See most recent “ASC Z97 Technical Interpretation (TI-2018.1017.001)” at www.sgcc.org or contact the SGCC office.
July 2021
Page 34
SGCC ADVERTISING GUIDELINES The following concepts are important to remember if you are a participant or licensee in the SGCC Certification Program or a distributor of safety glazing materials. This discussion is intended to provide you with an accurate background description of the SGCC Certification Program to help you avoid making possibly misleading, deceptive, or ambiguous statements regarding the program in the advertising of your products. 1) SGCC is a non-profit organization that maintains a third-party certification program which provides for the certification of safety glazing materials found to be in compliance with either ANSI Z-97.1-2015 or 16 CFR 1201 or both, or both plus CAN/CGSB 12.1. Products are not certified by SGCC unless and until a test to the applicable specification(s) conducted at an approved testing laboratory indicates compliance and the license contract requirements are met. (Revised 10/10/2012) 2) Once certified by SGCC, a product is assigned an exclusive certification number to identify it and the plant at which it is made. After which, to ensure continued adherence to the specification(s), SGCC independently selects, at least twice in each year, samples from the manufacturer or from the market place to be tested to the applicable specification(s). Consequent to a test result showing compliance with the applicable specification(s), SGCC authorizes the continued use of the certification number and its listing in the SGCC’s Certified Products Directory. 3) To maintain certification, SGCC also requires licensees to have a working Quality Assurance program for the fabrication of safety glazing materials. Compliance to QA requirements is validated at the first SGCC plant inspection after products are certified, and adherence is verified thereafter at each twice per year plant visit. 4) To buyers, specifiers, code officials, and users, the SGCC certification label offers the licensee assurance that its safety glazing material has been produced in conformance to ANSI Z-97.1-2015, 16 CFR 1201 and/or CAN/CGSB 12.1. (Revised 10/10/2012) 5) The SGCC Administrator audits laboratories and checks their equipment, audits licensees’ production and fabrication of specimens, and validates test reports and certification claims. The Administrator periodically checks and reports on compliance of the products having the SGCC certification label with the applicable specification(s). 6) SGCC-approved laboratories test specimens to specific test methods and specifications referenced by SGCC. 7) SGCC does not have “members” insofar as the term “members” connotes that some detailed criteria must be met in order to participate in the organization. Under the SGCC by-laws, any person or organization (other than a glazing manufacturer) that has a legitimate interest in the purposes of SGCC may become a participant. Manufacturers, on the other hand, become participants by virtue of executing a License Agreement with SGCC. Any manufacturer of safety glazing may voluntarily enter into a License Agreement with SGCC, provided that they intend to certify at least one product under the SGCC Certification Program. Thus, the proper term to use for a manufacturer is “participant” or “Licensee.” 8) The following are examples of possible advertising language that licensees might wish to use:
a) Our company is a licensee of the Safety Glazing Certification Council (SGCC). b) We submit our tempered/laminated glass products for certification through the SGCC program. c) Our tempered/laminated glass products that are certified by SGCC as meeting the SGCC
certification program are listed in the SGCC’s Certified Products Directory. d) Our tempered/laminated glass products that are certified by SGCC are indicated by the SGCC
logo and certification number permanently marked on our products. (Added 10/26/2010) 9) **ANSI Disclaimer Although the SGCC Program is ANSI-accredited and uses the ANSI accreditation symbol on its publicity material the SGCC-certified Licensee cannot use the ANSI trademark nor the ANSI accreditation symbol, this includes its products, packaging, stationary, letterhead, or any other form of media.
July 2021
Page 35
SGCC® LABEL REQUIREMENTS (Revised 7/1/2016) GENERAL Unless the SGCC® certification label is permanently affixed to each piece of safety glazing material, it is not covered by the SGCC® certification program, and unless a specific standard (ANSI, CPSC, CAN/CGSB) is included in the label, the product is not certified to that standard. (Revised 10/10/2012)) The permanent label must contain the correct SGCC® number, ANSI Z97.1-2015 and/or 16 CFR 1201 and/or CAN/CGSB 12.1 (and category), the nominal thickness, (see SGCC® Guideline G.29 for international thickness standards), the letter U or L indicating certified size and the ANSI impact class (A or B). (Revised 7/1/2016) At the discretion of the SGCC® participant, for laminated glass, the actual thickness AND/OR thickness class (S, H) may appear on the label. (Added 1/1/2009) These requirements are minimum requirements for SGCC® Certification. It is the licensee’s responsibility to determine if other jurisdictions, standards and codes have additional requirements such as type of glass. (Revised 10/17/2007) For labeling purposes, a line of demarcation shall separate those specifications covered by the SGCC® number from any other specifications the licensee may wish to reference. For laminated products used in "Indoor Use Only" applications where no weathering data is on file with SGCC, the permanent label must include "Indoor Use Only." The SGCC® number can be used to identify both the “supplier” and “place of fabrication”. Refer to SGCC® Guideline G.5 (Revised 10/21/2005) The permanent label must be affixed to certified products ONLY at the time and place of manufacture (except for situations covered by Guideline G.18 and as stated below.) (Revised 10/25/2001)
EXAMPLES OF LABELS CERTIFIED TO ALL THREE STANDARDS In inches In mm Laminated example ABC Glass – Plant A (optional) ABC Glass – Plant A (optional) ABC Glass – Plant A (optional) 16 CFR 1201 II 16 CFR 1201 II 16 CFR 1201 II ANSI Z97.1-2015 ANSI Z97.1-2015 ANSI Z97.1-2015 CAN/CGSB 12.1-2017 CAN/CGSB 12.1-2017 CAN/CGSB 12.1-2017 1/4 U A SGCC 9999 6mm U A SGCC 9999 (S) U A SGCC 9999 Labeling of Cut Sheet Safety Glazing (refer to Guideline G.18) (Added 10/25/2001) When a distributor or installer wishes to include the SGCC® label on pieces of safety glazing cut from properly fabricated, labeled, and SGCC® certified product, the following shall apply: 1.) The designation “C/F” for “Cut From” shall appear in front of the SGCC® number. 2.) The distributor or installer must have written permission to do so from the primary SGCC® certified producer.
This written permission should address such issues as label accountability and application, differentiation between multi-source suppliers and a time frame or scope of labeling.
3.) Since SGCC® shall have no formal relationship with the distributor or installer, proper application and use of the SGCC® label shall be the responsibility of the SGCC® licensee producing the product.
4.) If the SGCC® label is not used, SGCC® has no jurisdiction.
EXAMPLES SGCC® Licensee or Primary Producer Authorized Distributor or Installer Company ABC (optional) Company XYZ (optional) Laminated Glass (optional) Laminated Glass (optional) ANSI Z97.1-2015 ANSI Z97.1-2015 16 CFR 1201 CII 16 CFR 1201 CII SGCC 9999 6mm U A C/F SGCC 9999 6mm U A
The permanent label must be affixed ONLY to safety glazing materials of the licensee which are certified in the SGCC® certification program. The permanent label must not be sold, transferred, or otherwise disposed of in any manner other than being affixed to the licensee’s certified product. The permanent label must NOT be affixed to any product from which certification has been withdrawn or which is produced with a process basically different from the one used to manufacture the initial or prototype samples.
July 2021
Page 36
ANSI ONLY LABEL "After having successfully passed the appropriate tests in this standard, like products and materials produced in the same manner as specimens submitted per test shall be legibly and permanently marked with a label.” Label Content. The label shall contain the following information:
1) Supplier’s name, distinctive mark or designation. 2) The words “American National Standard Z97.1-2015” or the characters “ANSI Z97.1-2015.” 3) Classification of test size (L or U) and drop height class (A, B). Plastic glazing does not require drop
height. 4) Place of fabrication (if fabricator has more than one location fabricating the product).
NOTE: Additional details and information, such as thickness and date of manufacture, are permitted. Quoted from ANSI Z97.1. (Revised 1/1/2011) Organic-Coated Glass Only. “Organic-coated glass materials shall be legibly and permanently marked with the words “Glaze This Side In,” to indicate to the installer, inspector, or user which side of the organic-coated glass should be exposed to the elements if there is a specific side that should be exposed.” Quoted from ANSI Z97.1. (Revised 10/21/2005) CPSC ONLY LABEL "Any glazing material that for accelerated environmental durability tests meets only the requirements of 1201.4 (e)(ii)(c) entitled Plastic (indoor service) shall bear the statement ‘INDOOR USE ONLY' as a part of the permanent label." Quoted from 16 CFR 1201. "Organic-coated glass that has been tested for environmental exposure from one side only must bear a permanent label on the coating stating ‘GLAZE THIS SIDE IN' and shall bear in the central 50 percent of the surface in letters at least 3" (inches) high: ‘SEE PERMANENT LABEL FOR IMPORTANT MOUNTING INSTRUCTIONS.' The latter message shall be attached to either side of the glazing by any means which shall ensure the message will remain in place until installation." Quoted from 16 CFR 1201. CPSC ACT LABELING REQUIREMENTS The following information is provided for the guidance of the licensee and is not a requirement of the SGCC® Certification Program. The Consumer Product Safety Act defines a private labeler and permits private labeling as long as a manufacturer is identified, which can be in code. A "private labeler" means an owner of a brand or trademark on the label of a consumer product, which bears a private label. Pursuant CPSC Advisory Opinion, dated April 12, 1984, a label on the material or product is acceptable as a certificate of compliance meeting the requirements of the CPSC if the label contains the same information required of a certificate of compliance. This information must include the date of manufacture, the place of manufacture, and the name of the manufacturer, importer, or private labeler. The certificate of compliance may also be a separate document, which accompanies the material or product or is otherwise furnished to each distributor or retailer. With respect to the CPSC requirement that the certificate of compliance name the manufacturer, a label meets that requirement if it includes a suitable identification of the manufacturer of the product (unless the product bears a private label), in which case it shall identify the private labeler and shall also contain a code mark which shall permit the seller of such product to identify the manufacturer thereof to the purchaser upon his request. As set forth in SGCC® certification guideline G.5, the SGCC® number designates the name of the licensee and also the location of the manufacturing plant, however, it does not designate the date of manufacture.
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
24 Hour Thermal Glass Insulated Ltd. ; Concord, ONTTG5/326918 UCOMPOSITE 4.0 A
TTG3/166919 UCOMPOSITE 5.0 A
TTG1/46920 UCOMPOSITE 6.0 A
3 Form ; Kernersville, NCTTG5/328085 UCOMP+CAN 4.0 A
TTG1/45026 UCOMP+CAN 6.0 A
TTG3/85210 UCOMP+CAN 10.0 A
TTG1/25211 UCOMP+CAN 12.0 A
A.L. Smith Glass Co. Inc. ; Ijamsville, MDTTG3/168098 UCOMPOSITE 5.0 A
TTG1/48099 UCOMPOSITE 6.0 A
TTG3/86144 UCOMPOSITE 10.0 A
TTG1/26145 UCOMPOSITE 12.0 A
A.N. ALODAN & SONS CO. GLASS & ALUMINIUM FACTORY ; Riyadh, Saudi Arabia
TTG1/47269 UCOMP+CAN 6.0 A
TTG5/167276 UCOMP+CAN 8.0 A
TTG*7277 UCOMP+CAN 12.0 (7) A
LTG(H)7278 UCOMP+CAN 8-16+ (b)(T) A(.045)Accurate Glass Products ; Barrie, Ontario
TTG3/167672 UCOMP+CAN 5.0 A
TTG1/47418 UCOMP+CAN 6.0 A
TTG5/167419 UCOMP+CAN 8.0 A
TTG3/87420 UCOMP+CAN 10.0 A
TTG1/27421 UCOMP+CAN 12.0 A
Ace Safety Glass Co., Ltd. ; Jeollabuk-DoTTG1/88237 34X3
4COMP+CAN 3.0 A
Advanced Design Manufacturing ; Antioch, CATTG1/46685 UCOMPOSITE 6.0 A
TTG3/86686 UCOMPOSITE 10.0 A
Advanced Impact Technologies ; Largo, FLTTG1/87374 UCOMP+CAN 3.0 A
TTG3/167375 UCOMP+CAN 5.0 A
TTG1/47376 UCOMP+CAN 6.0 A
TTG3/87377 UCOMP+CAN 10.0 A
TTG1/27378 UCOMP+CAN 12.0 A
LTG(S)7434 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7435 UCOMP+CAN 10-16+ (b)(A) A(.030)
AdvanTec ; Chilliwack, BCTTG5/327463 UCOMPOSITE 4.0 A
TTG3/167464 UCOMPOSITE 5.0 A
TTG1/47465 UCOMPOSITE 6.0 A
TTG5/167466 UCOMPOSITE 8.0 A
TTG3/87467 UCOMPOSITE 10.0 A
TTG1/27468 UCOMPOSITE 12.0 A
TTG*7469 UCOMPOSITE 15.0 (4) A
TTG3/47470 UCOMPOSITE 19.0 A
AGC Flat Glass North America ; Greenland, TNTTG1/8598 UCOMP+CAN 3.0 A
TTG5/32955 UCOMP+CAN 4.0 A
TTG3/16220 UCOMP+CAN 5.0 A
TTG1/489 UCOMP+CAN 6.0 A
TTG5/164046 UCOMP+CAN 8.0 A
TTG3/890 UCOMP+CAN 10.0 A
TPG1/8587 UCOMP+CAN 3.0 (s) A
TPG5/322980 UCOMP+CAN 4.0 (m) A
TPG3/161139 UCOMP+CAN 5.0 (s) A
AGC Flat Glass North America ; Spring Hill, KSTTG1/81702 UCOMP+CAN 3.0 A
TTG5/321703 UCOMP+CAN 4.0 A
TTG3/161704 UCOMP+CAN 5.0 A
TTG1/41705 UCOMP+CAN 6.0 A
AGNORA LTD ; Collingwood, ONTTG1/44883 UCOMP+CAN 6.0 A
TTG3/84885 UCOMP+CAN 10.0 A
TTG1/24884 UCOMP+CAN 12.0 A
LTG(H)4886 UCOMP+CAN 12+ (b)(A) A(.030)AJJ Glass Products Co., Ltd ; Xiamen, Fujian
TTG3/88331 UCOMP+CAN 10.0 A
TTG*8332 UCOMP+CAN 12.0 (3) A
LTG(H)8335 UCOMP+CAN 16+ (ip)(A) A(.060)LTG(H)8334 UCOMP+CAN 16+ (b)(A) A(.030)
AKMA LLC ; Saint-Petersburg, St.PetersburgTTG1/47838 UCOMP+CAN 6.0 A
TTG5/168182 UCOMP+CAN 8.0 A
TTG3/88183 UCOMP+CAN 10.0 A
LTG(H)7839 UCOMP+CAN 12-16+ (ip)(A) A(.035)Al Abbar Architectural Glass ; Dubai, United Arab Emirates
TTG3/164846 UCOMPOSITE 5.0 A
TTG1/43556 UCOMPOSITE 6.0 A
TTG5/163557 UCOMPOSITE 8.0 A
TTG3/83558 UCOMPOSITE 10.0 A
TTG1/24590 UCOMPOSITE 12.0 A
TTG*3976 UCOMPOSITE 15.0 (4) A
TTG3/43977 UCOMPOSITE 19.0 A
LTG(H)3560 UCOMPOSITE 8-16+ (b)(A) A(.030)Al Andalus Glass Factory Co. ; Riyadh, Riyadh
TTG1/47486 UCOMPOSITE 6.0 A
TTG1/27487 UCOMPOSITE 12.0 A
LTG(H)7488 UCOMPOSITE 12 (b)(A) A(.030)Aldora Aluminum and Glass Products Inc. ; Charleston, SC
TTG1/84328 UCOMPOSITE 3.0 A
TTG3/164330 UCOMPOSITE 5.0 A
TTG1/44331 UCOMPOSITE 6.0 A
TTG3/84335 UCOMPOSITE 10.0 A
TTG1/24336 UCOMPOSITE 12.0 A
LTG(H)4337 UCOMPOSITE 8, 12 (lu)(A) A(.060)
Page 37
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Aldora Aluminum and Glass Products, Inc. ; Austell, GATTG1/87307 UCOMPOSITE 3.0 A
TTG3/167308 UCOMPOSITE 5.0 A
TTG1/47309 UCOMPOSITE 6.0 A
TTG3/87310 UCOMPOSITE 10.0 A
TTG1/27311 UCOMPOSITE 12.0 A
TTG3/47851 UCOMPOSITE 19.0 A
Aldora Aluminum and Glass Products, Inc. ; Coral Springs, FL
TTG3/167643 UCOMPOSITE 5.0 A
TTG1/47644 UCOMPOSITE 6.0 A
TTG3/87645 UCOMPOSITE 10.0 A
TTG1/27646 UCOMPOSITE 12.0 A
TTG5/87647 UCOMPOSITE 16.0 A
LTG(H)7648 UCOMPOSITE 12 (lu)(HS)(6) A(.090)Aldora Aluminum and Glass Products, Inc. ; Orlando, FL
TTG1/85574 UCOMPOSITE 3.0 A
TTG3/165575 UCOMPOSITE 5.0 A
TTG1/45576 UCOMPOSITE 6.0 A
TTG3/85579 UCOMPOSITE 10.0 A
TTG1/25577 UCOMPOSITE 12.0 A
LTG(H)6429 UCOMPOSITE 8 (ip)(A) A(.060)LTG(H)6428 UCOMPOSITE 8 (b)(A) A(.060)
All Counties Glass ; Stockton, CATTG1/86409 UCOMP+CAN 3.0 A
TTG5/326410 UCOMP+CAN 4.0 A
TTG3/166411 UCOMP+CAN 5.0 A
TTG1/46412 UCOMP+CAN 6.0 A
TTG5/166413 UCOMP+CAN 8.0 A
TTG3/86414 UCOMP+CAN 10.0 A
TTG1/26415 UCOMP+CAN 12.0 A
All Team Glass & Mirror, Ltd. ; Woodbridge, ON CanadaTTG5/328218 UCOMP+CAN 4.0 A
TTG3/161755 UCOMP+CAN 5.0 A
TTG1/41756 UCOMP+CAN 6.0 A
TTG5/162790 UCOMP+CAN 8.0 A
TTG3/81757 UCOMP+CAN 10.0 A
TTG1/21758 UCOMP+CAN 12.0 A
TTG5/84355 UCOMP+CAN 16.0 A
TTG3/43656 UCOMP+CAN 19.0 A
All Weather Tempering of Arizona, LLC. ; Phoenix, AZTTG1/86377 UCOMPOSITE 3.0 A
TTG5/326378 UCOMPOSITE 4.0 A
TTG3/166379 UCOMPOSITE 5.0 A
TTG1/46380 UCOMPOSITE 6.0 A
TTG5/167010 UCOMPOSITE 8.0 A
TTG3/87011 UCOMPOSITE 10.0 A
TTG1/27012 UCOMPOSITE 12.0 A
TPG1/86381 UCOMPOSITE 3.0 (s) A
TPG3/166382 UCOMPOSITE 5.0 (s) A
TPG3/87994 UCOMPOSITE 10.0 (s) A
Allglass Tempering Inc. ; Schiller Park, ILTTG5/325835 UCOMPOSITE 4.0 A
TTG3/165836 UCOMPOSITE 5.0 A
TTG1/45837 UCOMPOSITE 6.0 A
TTG3/85838 UCOMPOSITE 10.0 A
TTG1/25839 UCOMPOSITE 12.0 A
LTG(H)7764 UCOMPOSITE 10-12 (ev)(A) A(.060)Aluminum Manufacturers Co. Ltd - ALUMATEC ; Jeddah, Saudi Arabia
TTG1/46151 UCOMP+CAN 6.0 A
TTG5/166152 UCOMP+CAN 8.0 A
TTG3/86891 UCOMP+CAN 10.0 A
TTG*7346 UCOMP+CAN 12.0 (3) A
LTG(H)6892 UCOMP+CAN 12 (b)(A) A(.030)Aluminum Technology Auxiliary Industries ; Doha, Qatar
TTG1/47197 UCOMPOSITE 6.0 A
TTG5/167198 UCOMPOSITE 8.0 A
TTG3/85084 UCOMPOSITE 10.0 A
TTG*5212 UCOMPOSITE 12.0 (3) A
American Insulated Glass ; Dallas, NCTTG1/83859 UCOMPOSITE 3.0 A
TTG5/323860 UCOMPOSITE 4.0 (IN) A
TTG3/163861 UCOMPOSITE 5.0 A
TTG1/43862 UCOMPOSITE 6.0 A
TTG3/83863 UCOMPOSITE 10.0 A
TTG1/23864 UCOMPOSITE 12.0 A
American Insulated Glass LLC. ; Plymouth Township, MITTG1/87834 UCOMPOSITE 3.0 A
TTG5/328131 UCOMPOSITE 4.0 A
TTG3/167835 UCOMPOSITE 5.0 A
TTG1/47836 UCOMPOSITE 6.0 A
TTG3/87837 UCOMPOSITE 10.0 A
TPG1/87875 UCOMPOSITE 3.0 (s) A
TPG3/167876 UCOMPOSITE 5.0 (s) A
American Insulated Glass, LLC ; Conley, GATTG1/85283 UCOMPOSITE 3.0 A
TTG3/165284 UCOMPOSITE 5.0 A
TTG1/45285 UCOMPOSITE 6.0 A
TTG3/85286 UCOMPOSITE 10.0 A
TTG1/25287 UCOMPOSITE 12.0 A
TPG1/85288 UCOMPOSITE 3.0 (s) A
TPG3/165289 UCOMPOSITE 5.0 (m) A
American Shower Door ; Los Angeles, CATTG1/43039 UCOMPOSITE 6.0 A
TTG3/83040 UCOMPOSITE 10.0 A
TTG1/23041 UCOMPOSITE 12.0 A
TPG1/43042 UCOMPOSITE 6.0 (s) A
TPG3/83043 UCOMPOSITE 10.0 (s) A
Amsco Windows ; Salt Lake City, UTTTG1/82578 UCOMPOSITE 3.0 A
TTG5/324643 UCOMPOSITE 4.0 A
TTG3/162580 UCOMPOSITE 5.0 A
TTG1/42581 UCOMPOSITE 6.0 A
TPG1/82582 UCOMPOSITE 3.0 (m) A
TPG3/162584 UCOMPOSITE 5.0 (m) A
Page 38
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Anhui Dahe Mirror Enterprise Co. LTD. ; Anhui, ChinaTTG1/87778 UCOMP+CAN 3.0 A
TTG3/167779 UCOMP+CAN 5.0 A
TTG1/47780 UCOMP+CAN 6.0 A
TTG5/167781 UCOMP+CAN 8.0 A
TTG3/87782 UCOMP+CAN 10.0 A
TTG1/27783 UCOMP+CAN 12.0 A
Ant-Cam Pazarlama A.S. ; Antalya, DosemealtiLTG(H)8047 UCOMPOSITE 16+ (b)(A) A(.030)LTG(H)8046 UCOMPOSITE 16+ (ip)(A) A(.035)
Anthony International ; Madison, GATTG1/83249 UCOMPOSITE 3.0 A
TTG5/323027 UCOMPOSITE 4.0 A
TTG3/162352 UCOMPOSITE 5.0 A
TTG1/42353 UCOMPOSITE 6.0 A
TTG5/165234 UCOMPOSITE 8.0 A
TTG3/82453 UCOMPOSITE 10.0 A
TBG5/326099 UCOMPOSITE 4.0 A
TBG3/162306 UCOMPOSITE 5.0 A
TBG1/42307 UCOMPOSITE 6.0 A
Anthony International ; San Fernando, CATTG1/8520 UCOMPOSITE 3.0 A
TTG5/322289 UCOMPOSITE 4.0 A
TTG3/16999 UCOMPOSITE 5.0 A
TTG1/41000 UCOMPOSITE 6.0 A
Architectural Glass Products, LLC. ; St. Louis, MOTTG1/84571 UCOMPOSITE 3.0 A
TTG3/164572 UCOMPOSITE 5.0 A
TTG1/44573 UCOMPOSITE 6.0 A
TPG3/164574 UCOMPOSITE 5.0 (s) A
Arlene Stained Glass & Door ; Houston, TXTTG1/85127 UCOMPOSITE 3.0 A
TTG3/163583 UCOMPOSITE 5.0 A
TTG1/43584 UCOMPOSITE 6.0 A
TPG5/323585 UCOMPOSITE 4.0 (d) A
Armoured One Glass LLC ; Syracuse, NYLTG(S)8196 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)8197 UCOMP+CAN 10,12 (b)(A) A(.030)
Arrow Mirror & Glass, Inc. ; Houston, TXTTG1/48213 UCOMPOSITE 6.0 A
TTG3/88214 UCOMPOSITE 10.0 A
TTG1/28215 UCOMPOSITE 12.0 A
ArtVue Glass ; Sarasota, FLLTG(H)7445 UCOMPOSITE 10-16+ (ev)(A) A(.060)LTG(H)7968 UCOMPOSITE 12 (ip)(A) A(.035)
Ascent Glass Products (Zhong Shan) Limited ; Zhongshan City, Guangdong Province
TTG5/327929 UCOMPOSITE 4.0 A
TTG3/167930 UCOMPOSITE 5.0 A
TTG1/47931 UCOMPOSITE 6.0 A
TTG5/167932 UCOMPOSITE 8.0 A
TTG3/87933 UCOMPOSITE 10.0 A
ATI Windows ; Riverside, CATTG1/85635 UCOMPOSITE 3.0 A
TTG5/325636 UCOMPOSITE 4.0 A
TTG3/165637 UCOMPOSITE 5.0 A
TTG1/45638 UCOMPOSITE 6.0 A
TTG3/88057 UCOMPOSITE 10.0 A
TTG1/28058 UCOMPOSITE 12.0 A
TPG1/85639 UCOMPOSITE 3.0 (s) A
TPG5/327995 UCOMPOSITE 4.0 (m) A
Auna Glass S.L. ; La Sentiu, CatalunaTTG1/48245 UCOMPOSITE 6.0 A
TTG5/168246 UCOMPOSITE 8.0 A
TTG3/88247 UCOMPOSITE 10.0 A
TTG1/28248 UCOMPOSITE 12.0 A
LTG(H)8249 UCOMPOSITE 12 (b)(A) A(.015)Basco Engineered Products ; Hamilton, OH
TTG1/84139 UCOMPOSITE 3.0 A
TTG3/164724 UCOMPOSITE 5.0 A
TTG1/43810 UCOMPOSITE 6.0 A
TTG3/83811 UCOMPOSITE 10.0 A
TTG1/23812 UCOMPOSITE 12.0 A
TTG3/45076 UCOMPOSITE 19.0 A
TPG3/168106 UCOMPOSITE 5.0 (m) A
TPG1/44689 UCOMPOSITE 6.0 (s) A
TPG3/85203 UCOMPOSITE 10.0 (m) A
Bazhou hua Biao Furniture Co., Ltd. ; Bazhou, HebeiTTG3/167193 UCOMP+CAN 5.0 A
TTG1/47194 UCOMP+CAN 6.0 A
TTG5/167195 UCOMP+CAN 8.0 A
TTG3/87196 UCOMP+CAN 10.0 A
Beijing Northglass Technologies Co. Ltd ; Beijing, ChinaTTG1/46668 UCOMP+CAN 6.0 A
TTG5/166669 UCOMP+CAN 8.0 A
TTG3/87562 UCOMP+CAN 10.0 A
LTG(H)6677 UCOMP+CAN 12-16+ (b)(T) A(.060)Beijing Wuhua Tianbao Glass Co. ; Beijing, China
TTG5/326903 UCOMP+CAN 4.0 A
TTG3/166904 UCOMP+CAN 5.0 A
TTG1/46905 UCOMP+CAN 6.0 A
TTG5/166906 UCOMP+CAN 8.0 A
TTG3/86907 UCOMP+CAN 10.0 A
TTG*6908 UCOMP+CAN 12.0 (4) A
TTG*6909 UCOMP+CAN 15.0 (4) A
TTG3/46910 UCOMP+CAN 19.0 A
LTG(H)7762 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7763 UCOMP+CAN 8-16+ (ip)(A) A(.035)
Bel Pre Glassworks Inc. ; Rockville, MDTTG1/86320 UCOMPOSITE 3.0 A
TTG3/166321 UCOMPOSITE 5.0 A
TTG1/46322 UCOMPOSITE 6.0 A
TTG3/86711 UCOMPOSITE 10.0 A
TTG1/26324 UCOMPOSITE 12.0 A
TTG3/46325 UCOMPOSITE 19.0 A
Page 39
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Bel Shower Door Corporation ; Englewood, COTTG3/166470 UCOMP+CAN 5.0 A
TTG1/46471 UCOMP+CAN 6.0 A
TTG3/86472 UCOMP+CAN 10.0 A
TTG1/26473 UCOMP+CAN 12.0 A
TPG3/166474 UCOMP+CAN 5.0 (m) A
Bendheim Wall Systems ; Wunsiedel-Holenbrunn, Germany
TBP*5145 22x7COMPOSITE 6.0 (s)(2) A
TBP*5144 16x7COMPOSITE 7.0 (d)(2) A
TBG*2570 20x7COMPOSITE 6.0 (2) A
TBG*2569 16x7COMPOSITE 7.0 (2) A
BG Glass Technologies Inc. ; Barrie, OntarioTTG5/328137 UCOMP+CAN 4.0 A
TTG3/168138 UCOMP+CAN 5.0 A
TTG1/48139 UCOMP+CAN 6.0 A
TTG3/88140 UCOMP+CAN 10.0 A
TTG1/28141 UCOMP+CAN 12.0 A
Blackline Aluminum Systems ; Markham, ONTTG5/328117 UCOMP+CAN 4.0 A
TTG3/168118 UCOMP+CAN 5.0 A
TTG1/48119 UCOMP+CAN 6.0 A
TTG3/88120 UCOMP+CAN 10.0 A
Blue Star Glass Inc. ; North Brunswick, NJTTG1/84517 UCOMPOSITE 3.0 A
TTG5/326782 UCOMPOSITE 4.0 A
TTG3/164518 UCOMPOSITE 5.0 A
TTG1/44519 UCOMPOSITE 6.0 A
TTG5/166407 UCOMPOSITE 8.0 A
TTG3/84520 UCOMPOSITE 10.0 A
TTG1/24521 UCOMPOSITE 12.0 A
TTG5/85174 UCOMPOSITE 16.0 A
TTG3/45175 UCOMPOSITE 19.0 A
Bronco Industries, Inc. ; Delta, BCTTG1/86973 UCOMP+CAN 3.0 A
TTG5/325871 UCOMP+CAN 4.0 A
TTG3/166974 UCOMP+CAN 5.0 A
TTG1/45366 UCOMP+CAN 6.0 A
TTG3/85367 UCOMP+CAN 10.0 A
TTG1/25368 UCOMP+CAN 12.0 A
TTG3/46972 UCOMP+CAN 19.0 A
Bronx Westchester Tempering Inc. ; Mount Vernon, NYTTG3/167412 UCOMPOSITE 5.0 A
TTG1/47413 UCOMPOSITE 6.0 A
TTG3/87414 UCOMPOSITE 10.0 A
TTG1/27415 UCOMPOSITE 12.0 A
TTG5/87416 UCOMPOSITE 16.0 A
TTG3/47417 UCOMPOSITE 19.0 A
Burhani Glass Factory, LLC ; Dubai, UAETTG1/48111 UCOMPOSITE 6.0 A
TTG5/168112 UCOMPOSITE 8.0 A
TTG3/88113 UCOMPOSITE 10.0 A
TTG1/28114 UCOMPOSITE 12.0 A
LTGH8115 UCOMPOSITE 12.0 (b)(A) A(.060)
BVGLAZING SYSTEMS ; Concord, ONTTG5/326134 UCOMP+CAN 4.0 A
TTG3/166135 UCOMP+CAN 5.0 A
TTG1/46136 UCOMP+CAN 6.0 A
TTG5/166137 UCOMP+CAN 8.0 A
TTG3/86138 UCOMP+CAN 10.0 A
TTG1/27694 UCOMP+CAN 12.0 A
TPG3/166139 UCOMP+CAN 5.0 (s) A
C&C Custom Glass & Tempering, LLC ; Tulsa, OKTTG5/326854 UCOMPOSITE 4.0 A
TTG3/166855 UCOMPOSITE 5.0 A
TTG1/46856 UCOMPOSITE 6.0 A
TTG5/166857 UCOMPOSITE 8.0 A
TTG3/86858 UCOMPOSITE 10.0 A
TTG1/26859 UCOMPOSITE 12.0 A
TTG3/46860 UCOMPOSITE 19.0 (IN) A
TPG5/326962 UCOMPOSITE 4.0 (s) A
TPG3/166861 UCOMPOSITE 5.0 (s) A
TPG3/86862 UCOMPOSITE 10.0 (s) A
Cameron Glass, Inc. ; Broken Arrow, OKTTG1/84832 UCOMP+CAN 3.0 A
TTG3/162501 UCOMP+CAN 5.0 A
TTG1/42455 UCOMP+CAN 6.0 A
TTG3/82032 UCOMP+CAN 10.0 A
TTG1/22033 UCOMP+CAN 12.0 A
Camyapi Cam Paz. Ins. Taah. Tic.ve San. Ltd. Sti ; Kocaeli, Dilovasi
TTG1/48279 UCOMP+CAN 6.0 A
TTG5/168280 UCOMP+CAN 8.0 A
TTG3/88281 UCOMP+CAN 10.0 A
TTG1/28282 UCOMP+CAN 12.0 A
LTG(H)8283 COMP+CAN 12-16+ (A)(b) (.060)Cardinal CG ; Buford, GA
TTG1/81921 UCOMP+CAN 3.0 A
TTG5/321922 UCOMP+CAN 4.0 A
TTG3/161923 UCOMP+CAN 5.0 A
TTG1/41924 UCOMP+CAN 6.0 A
TPG1/82146 UCOMP+CAN 3.0 (s) A
TPG3/164599 UCOMP+CAN 5.0 (s) A
Cardinal CG ; Casa Grande, AZTTG1/82878 UCOMP+CAN 3.0 A
TTG5/322879 UCOMP+CAN 4.0 A
TTG3/162880 UCOMP+CAN 5.0 A
TTG1/42881 UCOMP+CAN 6.0 A
TPG1/84103 UCOMP+CAN 3.0 (m) A
TPG5/324104 UCOMP+CAN 4.0 (d) A
TPG3/164105 UCOMP+CAN 5.0 (m) A
Cardinal CG ; Galt, CATTG1/82357 UCOMPOSITE 3.0 A
TTG5/322358 UCOMPOSITE 4.0 A
TTG3/162359 UCOMPOSITE 5.0 A
TTG1/42360 UCOMPOSITE 6.0 A
TPG1/83599 UCOMPOSITE 3.0 (s) A
TPG5/324347 UCOMPOSITE 4.0 (d) A
TPG3/163601 UCOMPOSITE 5.0 (m) A
Page 40
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Cardinal CG ; Loveland, COTTG1/83579 UCOMPOSITE 3.0 A
TTG5/323580 UCOMPOSITE 4.0 A
TTG3/163581 UCOMPOSITE 5.0 A
TTG1/43555 UCOMPOSITE 6.0 A
TTG5/168060 UCOMPOSITE 8.0 A
TPG1/84343 UCOMPOSITE 3.0 (s) A
TPG5/324344 UCOMPOSITE 4.0 (d) A
TPG3/164345 UCOMPOSITE 5.0 (m) A
TPG1/45720 UCOMPOSITE 6.0 (d) A
Cardinal CG ; Mazomanie, WITTG1/84780 UCOMP+CAN 3.0 A
TTG5/324781 UCOMP+CAN 4.0 A
TTG3/165306 UCOMP+CAN 5.0 A
TTG1/44783 UCOMP+CAN 6.0 A
TTG5/166552 UCOMP+CAN 8.0 A
Cardinal CG ; Moreno Valley, CATTG1/82293 UCOMP+CAN 3.0 A
TTG5/322294 UCOMP+CAN 4.0 A
TTG3/162295 UCOMP+CAN 5.0 A
TTG1/42296 UCOMP+CAN 6.0 A
TPG1/85335 UCOMP+CAN 3.0 (s) A
TPG3/165336 UCOMP+CAN 5.0 (m) A
Cardinal CG ; Northfield, MNTTG1/81985 UCOMP+CAN 3.0 A
TTG5/321986 UCOMP+CAN 4.0 A
TTG3/161987 UCOMP+CAN 5.0 A
TTG1/41988 UCOMP+CAN 6.0 A
TTG5/164775 UCOMP+CAN 8.0 A
TTG3/84137 UCOMP+CAN 10.0 A
TTG1/26534 UCOMP+CAN 12.0 A
TPG1/82011 UCOMP+CAN 3.0 (s) A
TPG5/322012 UCOMP+CAN 4.0 (d) A
TPG3/162013 UCOMP+CAN 5.0 (m) A
Cardinal CG ; Spring Green, WITTG1/82067 UCOMP+CAN 3.0 A
TTG5/322068 UCOMP+CAN 4.0 A
TTG3/162069 UCOMP+CAN 5.0 A
TTG1/42070 UCOMP+CAN 6.0 A
TTG5/165281 UCOMP+CAN 8.0 A
TPG1/82071 UCOMP+CAN 3.0 (s) A
TPG3/166802 UCOMP+CAN 5.0 (m) A
Cardinal CG ; Tumwater, WATTG1/82007 UCOMP+CAN 3.0 A
TTG5/322008 UCOMP+CAN 4.0 A
TTG3/162009 UCOMP+CAN 5.0 A
TTG1/42010 UCOMP+CAN 6.0 A
TPG1/82954 UCOMP+CAN 3.0 (s) A
TPG5/326723 UCOMP+CAN 4.0 (d) A
TPG3/162956 UCOMP+CAN 5.0 (m) A
Cardinal CG ; Waxahachie, TXTTG1/82699 UCOMP+CAN 3.0 A
TTG5/322700 UCOMP+CAN 4.0 A
TTG3/162701 UCOMP+CAN 5.0 A
TTG1/42702 UCOMP+CAN 6.0 A
TPG5/324047 UCOMP+CAN 4.0 (m) A
TPG3/162705 UCOMP+CAN 5.0 (m) A
Cardinal CT ; Adel, GATTG1/85095 UCOMP+CAN 3.0 A
TTG5/325096 UCOMP+CAN 4.0 A
TTG3/165097 UCOMP+CAN 5.0 A
TTG1/45364 UCOMP+CAN 6.0 A
TTG5/166842 UCOMP+CAN 8.0 A
TTG3/86172 UCOMP+CAN 10.0 A
TTG1/26173 UCOMP+CAN 12.0 A
TPG1/85098 UCOMP+CAN 3.0 (d) A
TPG5/325099 UCOMP+CAN 4.0 (d) A
TPG3/165100 UCOMP+CAN 5.0 (d) A
TPG1/46174 UCOMP+CAN 6.0 (s) A
TPG3/86516 UCOMP+CAN 10.0 (s) A
Cardinal CT ; Easton, PATTG1/84756 UCOMP+CAN 3.0 A
TTG5/324757 UCOMP+CAN 4.0 A
TTG3/164758 UCOMP+CAN 5.0 A
TTG1/45842 UCOMP+CAN 6.0 A
TPG1/84759 UCOMP+CAN 3.0 (m) A
TPG5/324760 UCOMP+CAN 4.0 (s) A
TPG3/166143 UCOMP+CAN 5.0 (m) A
Cardinal CT ; Fort Worth, TXTTG1/87317 UCOMPOSITE 3.0 A
TTG5/327318 UCOMPOSITE 4.0 A
TTG3/167319 UCOMPOSITE 5.0 A
TTG1/47320 UCOMPOSITE 6.0 A
TPG1/87321 UCOMPOSITE 3.0 (m) A
TPG5/327323 UCOMPOSITE 4.0 (m) A
TPG3/167322 UCOMPOSITE 5.0 (m) A
Cardinal CT ; Los Angeles, CATTG1/85085 UCOMP+CAN 3.0 A
TTG5/325086 UCOMP+CAN 4.0 A
TTG3/165087 UCOMP+CAN 5.0 A
TTG1/45991 UCOMP+CAN 6.0 A
TPG1/85088 UCOMP+CAN 3.0 (s) A
TPG3/165089 UCOMP+CAN 5.0 (s) A
Cardinal CT ; Mount Airy, NCTTG1/84578 UCOMP+CAN 3.0 A
TTG5/324579 UCOMP+CAN 4.0 A
TTG3/164580 UCOMP+CAN 5.0 A
TTG1/48134 UCOMP+CAN 6.0 A
TPG1/84581 UCOMP+CAN 3.0 (s) A
TPG5/324742 UCOMP+CAN 4.0 (s) A
TPG3/164582 UCOMP+CAN 5.0 (s) A
Page 41
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Cardinal CT ; Utica, OHTTG1/84620 UCOMP+CAN 3.0 A
TTG5/324621 UCOMP+CAN 4.0 A
TTG3/164622 UCOMP+CAN 5.0 A
TTG1/45479 UCOMP+CAN 6.0 A
TPG1/84623 UCOMP+CAN 3.0 (m) A
TPG5/324624 UCOMP+CAN 4.0 (m) A
TPG3/164625 UCOMP+CAN 5.0 (m) A
Cardinal FG ; Durant, OKTTG1/82909 UCOMP+CAN 3.0 A
TTG5/322910 UCOMP+CAN 4.0 A
TTG3/162911 UCOMP+CAN 5.0 A
TTG1/42912 UCOMP+CAN 6.0 A
Cardinal IG ; Buckeye, AZTTG1/86556 UCOMP+CAN 3.0 A
TTG5/326522 UCOMP+CAN 4.0 A
TTG3/166523 UCOMP+CAN 5.0 A
TTG1/46524 UCOMP+CAN 6.0 A
TTG5/166557 UCOMP+CAN 8.0 A
TPG1/87491 UCOMP+CAN 3.0 (m) A
TPG5/326525 UCOMP+CAN 4.0 (d) A
TPG3/166559 UCOMP+CAN 5.0 (m) A
Cardinal IG ; Fargo, NDTTG1/82235 UCOMP+CAN 3.0 A
TTG5/322234 UCOMP+CAN 4.0 A
TTG3/162233 UCOMP+CAN 5.0 A
TTG1/42232 UCOMP+CAN 6.0 A
TTG5/167067 UCOMP+CAN 8.0 A
TPG1/82231 UCOMP+CAN 3.0 (s) A
TPG5/322285 UCOMP+CAN 4.0 (m) A
TPG3/162286 UCOMP+CAN 5.0 (s) A
Cardinal IG ; Fremont, INTTG1/82176 UCOMP+CAN 3.0 A
TTG5/322177 UCOMP+CAN 4.0 A
TTG3/162178 UCOMP+CAN 5.0 A
TTG1/42179 UCOMP+CAN 6.0 A
TPG1/82203 UCOMP+CAN 3.0 (s) A
TPG5/322204 UCOMP+CAN 4.0 (m) A
TPG3/162205 UCOMP+CAN 5.0 (s) A
Cardinal IG ; Greenfield, IATTG1/81827 UCOMP+CAN 3.0 A
TTG5/321828 UCOMP+CAN 4.0 A
TTG3/161829 UCOMP+CAN 5.0 A
TTG1/41830 UCOMP+CAN 6.0 A
TTG5/165435 UCOMP+CAN 8.0 A
TPG1/81841 UCOMP+CAN 3.0 (s) A
TPG5/321842 UCOMP+CAN 4.0 (d) A
TPG3/161843 UCOMP+CAN 5.0 (s) A
Cardinal IG ; Hood River, ORTTG1/82831 UCOMP+CAN 3.0 A
TTG5/322858 UCOMP+CAN 4.0 A
TTG3/162833 UCOMP+CAN 5.0 A
TTG1/42834 UCOMP+CAN 6.0 A
TTG5/167926 UCOMP+CAN 8.0 A
TPG1/82857 UCOMP+CAN 3.0 (s) A
TPG5/324836 UCOMP+CAN 4.0 (d) A
TPG3/162859 UCOMP+CAN 5.0 (m) A
Cardinal IG ; Mountain Top, PATTG1/83068 UCOMP+CAN 3.0 A
TTG5/323069 UCOMP+CAN 4.0 A
TTG3/163070 UCOMP+CAN 5.0 A
TTG1/43071 UCOMP+CAN 6.0 A
TPG1/83073 UCOMP+CAN 3.0 (m) A
TPG5/323115 UCOMP+CAN 4.0 (s) A
TPG3/163072 UCOMP+CAN 5.0 (m) A
Cardinal IG ; Ocala, FLTTG1/83505 UCOMPOSITE 3.0 A
TTG5/323506 UCOMPOSITE 4.0 A
TTG3/163507 UCOMPOSITE 5.0 A
TTG1/43508 UCOMPOSITE 6.0 A
TPG1/84584 UCOMPOSITE 3.0 (m) A
TPG1/44587 UCOMPOSITE 6.0 (s) A
LTG(S)3509 UCOMPOSITE 6 (b)(A) A(.030)LTG(S)6100 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)3510 UCOMPOSITE 8-12 (b)(A) A(.030)LTG(H)4362 UCOMPOSITE 8-12 (ip)(A) A(.035)
Cardinal IG ; Spring Green, WITTG1/81831 UCOMP+CAN 3.0 A
TTG5/325910 U COMP+CAN 4.0 A
TTG3/165911 UCOMP+CAN 5.0 A
TTG1/41834 UCOMP+CAN 6.0 A
TPG1/81844 UCOMP+CAN 3.0 (s) A
TPG5/321845 UCOMP+CAN 4.0 (m) A
TPG3/165912 UCOMP+CAN 5.0 (s) A
Cardinal IG ; Tomah, WITTG1/82317 UCOMP+CAN 3.0 A
TTG5/322318 UCOMP+CAN 4.0 A
TTG3/162319 UCOMP+CAN 5.0 A
TTG1/42320 UCOMP+CAN 6.0 A
TTG5/166069 UCOMP+CAN 8.0 A
TPG1/82321 UCOMP+CAN 3.0 (m) A
TPG5/322322 UCOMP+CAN 4.0 (d) A
TPG3/162323 UCOMP+CAN 5.0 (d) A
Cardinal IG ; Vinton, VATTG1/82919 UCOMP+CAN 3.0 A
TTG5/322920 UCOMP+CAN 4.0 A
TTG3/162921 UCOMP+CAN 5.0 A
TTG1/42922 UCOMP+CAN 6.0 A
TPG1/82923 UCOMP+CAN 3.0 (s) A
TPG5/322924 UCOMP+CAN 4.0 (d) A
TPG3/163619 UCOMP+CAN 5.0 (s) A
Page 42
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Cardinal IG ; Waxahachie, TXTTG1/82328 UCOMP+CAN 3.0 A
TTG5/322329 UCOMP+CAN 4.0 A
TTG3/162330 UCOMP+CAN 5.0 A
TTG1/42331 UCOMP+CAN 6.0 A
TPG1/82397 UCOMP+CAN 3.0 (m) A
TPG5/324091 UCOMP+CAN 4.0 (d) A
TPG3/162399 UCOMP+CAN 5.0 (m) A
Cardinal LG ; Amery, WITTG5/328255 UCOMP+CAN 4.0 A
TTG3/165193 UCOMP+CAN 5.0 A
TTG1/44841 UCOMP+CAN 6.0 A
TTG5/164842 UCOMP+CAN 8.0 A
TTG3/84843 UCOMP+CAN 10.0 A
TTG1/24844 UCOMP+CAN 12.0 A
TTG5/86484 UCOMP+CAN 16.0 (IN) A
LTG(S)2976 UCOMP+CAN 5-6 (b)(A) A(.030)LTG(S)4350 UCOMP+CAN 5-6 (ip)(A) A(.035)LTG(S)4120 UCOMP+CAN 5 (b)(A) B(.015)(C1)LTG(H)4351 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)2462 UCOMP+CAN 8-16+ (b)(A) A(.030)LSP(H)8336 UCOMP+CAN 16+ (b)(A) A.060X2
ECX1Cardinal LG Northeast ; Jessup, PA
TTG1/87496 UCOMP+CAN 3.0 A
TTG5/327497 UCOMP+CAN 4.0 A
TTG3/167498 UCOMP+CAN 5.0 A
TTG1/47499 UCOMP+CAN 6.0 A
TTG5/167500 UCOMP+CAN 8.0 A
TTG3/87549 UCOMP+CAN 10.0 A
TTG1/27550 UCOMP+CAN 12.0 A
LTG(S)5224 UCOMP+CAN 5-6 (b)(A) A(.030)LTG(S)6617 UCOMP+CAN 5-6 (ip)(A) A(.035)LTG(H)5225 UCOMP+CAN 8-12 (b)(A) A(.030)LTG(H)6618 UCOMP+CAN 8-12 (ip)(A) A(.035)
Cardinal Tempering ; Louisville, KYTTG5/323871 UCOMPOSITE 4.0 A
TTG3/163872 UCOMPOSITE 5.0 A
TTG1/43873 UCOMPOSITE 6.0 A
TTG3/83874 UCOMPOSITE 10.0 A
TTG1/23875 UCOMPOSITE 12.0 A
Cardinal TG ; Chehalis, WATTG1/83455 UCOMP+CAN 3.0 A
TTG5/323456 UCOMP+CAN 4.0 A
TTG3/163458 UCOMP+CAN 5.0 A
TTG1/43459 UCOMP+CAN 6.0 A
Carey Glass UC ; Nenagh, Co. TipperaryTTG1/45998 UCOMP+CAN 6.0 A
TTG5/165999 UCOMP+CAN 8.0 A
TTG3/86000 UCOMP+CAN 10.0 A
LTG(H)7333 UCOMP+CAN 12-16+ (ip)(A) A(.060)LTG(H) 6001 UCOMP+CAN 12-16+ (b)(A) A(.060)
Cat-I Manufacturing, Inc. ; South Elgin, ILTTG1/88076 24x3COMP+CAN 3.0 A
TTG5/325755 24x3COMP+CAN 4.0 A
Central Valley Glass & Screen, Inc. ; Sacramento, CATTG1/87551 UCOMPOSITE 3.0 A
TTG5/327552 UCOMPOSITE 4.0 A
TTG3/167553 UCOMPOSITE 5.0 A
TTG1/47554 UCOMPOSITE 6.0 A
TTG3/87555 UCOMPOSITE 10.0 A
TTG1/27556 UCOMPOSITE 12.0 A
CGMI Acquisition Company LLC dba Clearlight Glass and Mirror ; Kernersville, NC
TTG1/87809 UCOMP+CAN 3.0 A
TTG3/167239 UCOMP+CAN 5.0 A
TTG1/47240 UCOMP+CAN 6.0 A
TTG3/87243 UCOMP+CAN 10.0 A
TTG1/27241 UCOMP+CAN 12.0 A
Changshu Fardglass Co. Ltd. ; Changshu, JiangsuTTG1/86684 UCOMP+CAN 3.0 A
ChangShu MayBo Glass Co., Ltd ; Changshu, Jiangsu, China
TTG1/87115 UCOMPOSITE 3.0 A
TTG5/327114 UCOMPOSITE 4.0 A
TTG3/167116 UCOMPOSITE 5.0 A
Changshu Weier Glass Products Co. Ltd. ; Changshu, Jiangsu, China
TTG1/85351 UCOMPOSITE 3.0 A
TTG5/325352 UCOMPOSITE 4.0 A
TTG3/165353 UCOMPOSITE 5.0 A
TTG1/45354 UCOMPOSITE 6.0 A
Changshu Xingfu Glass Building Material Co., LTD ; Changshu, Jiangsu, China
TTG1/84657 UCOMP+CAN 3.0 A
TTG5/165151 UCOMP+CAN 8.0 A
TTG3/85152 UCOMP+CAN 10.0 A
Changshu ZhongXin Building Materials Co., Ltd. ; Changshu, Jiangsu, China
TTG1/82432 UCOMP+CAN 3.0 A
TTG5/326191 UCOMP+CAN 4.0 A
TTG3/166475 UCOMP+CAN 5.0 A
TTG1/46499 UCOMP+CAN 6.0 A
TTG5/166500 UCOMP+CAN 8.0 A
LTG(H)4363 UCOMP+CAN 8 (b)(A) A(.090)Changshu Zhouxing Glass Co. Ltd. ; Changshu, Jiangsu Province, China
TTG1/84936 UCOMP+CAN 3.0 A
Chicago Tempered Glass, Inc. ; Chicago, ILTTG5/323086 UCOMPOSITE 4.0 A
TTG3/163087 UCOMPOSITE 5.0 A
TTG1/43088 UCOMPOSITE 6.0 A
TTG3/83089 UCOMPOSITE 10.0 A
TTG1/23090 UCOMPOSITE 12.0 A
LTG(H)6714 UCOMPOSITE 12 (ip)(A) (IN) A(.035)
Page 43
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Chongqing SYP Engineering Glass Co., Ltd. ; Chongqing, China
TTG1/46810 UCOMP+CAN 6.0 A
TTG5/166811 UCOMP+CAN 8.0 A
TTG3/86812 UCOMP+CAN 10.0 A
TTG1/26813 UCOMP+CAN 12.0 A
LTG(H)6814 UCOMP+CAN 12-16+ (b)(A) A(.030)LTG(H)6815 UCOMP+CAN 12-16+ (ip)(A) A(.060)
Classy Glass Specialties Co., Ltd ; Dongguan, GuangdongTTG1/45159 UCOMPOSITE 6.0 A
TTG5/165160 UCOMPOSITE 8.0 A
TTG3/85161 UCOMPOSITE 10.0 A
TTG1/25162 UCOMPOSITE 12.0 A
LTG(H)7634 UCOMPOSITE 25+ (b)(A) A(.060)Cleer Vision Tempered Glass ; Elkhart, IN
TTG1/84546 UCOMP+CAN 3.0 A
TTG1/47630 UCOMP+CAN 6.0 A
Clinton Glass Company ( Middlebrook Pike) ; Knoxville, TN
TTG1/47543 UCOMPOSITE 6.0 A
TTG5/167831 UCOMPOSITE 8.0 A
TTG3/87544 UCOMPOSITE 10.0 A
TTG1/27545 UCOMPOSITE 12.0 A
Colorkote CT, LLC ; Stratford, CTLTG(H)7095 UCOMP+CAN 10-12 (ev)(A) A(.060)
Comercial Dialum SA ; Santiago, ChileLTG(H)5938 UCOMPOSITE 12 (ip)(A) A(.035)
Commercial Insulating Glass Co. ; Cumberland City, TNTTG1/83806 UCOMPOSITE 3.0 A
TTG3/163807 UCOMPOSITE 5.0 A
TTG1/43808 UCOMPOSITE 6.0 A
Compagnie de Portes Énergétique EDC (Energy Door Company) ; L'Assomption, Quebec
TTG5/327192 UCOMP+CAN 4.0 A
Complete Line Glass Wholesalers, Inc. ; San Antonio, TXTTG1/87565 UCOMPOSITE 3.0 A
TTG5/327566 UCOMPOSITE 4.0 A
TTG3/167567 UCOMPOSITE 5.0 A
TTG1/47568 UCOMPOSITE 6.0 A
TTG3/87569 UCOMPOSITE 10.0 A
TPG3/167570 UCOMPOSITE 5.0 (m) A
TPG3/87572 UCOMPOSITE 10.0 (s) A
Consolidated Glass Corp. ; New Castle, PATTG1/81998 UCOMP+CAN 3.0 A
TTG5/321999 UCOMP+CAN 4.0 A
TTG3/162005 UCOMP+CAN 5.0 A
TTG1/42002 UCOMP+CAN 6.0 A
TTG5/163635 UCOMP+CAN 8.0 A
TTG3/82003 UCOMP+CAN 10.0 A
TTG1/22004 UCOMP+CAN 12.0 A
TPG5/322355 UCOMP+CAN 4.0 (m) A
TPG3/162354 UCOMP+CAN 5.0 (m) A
TPG1/44714 UCOMP+CAN 6.0 (m) A
TPG3/84785 UCOMP+CAN 10.0 (s) A
Contemporary Glass Tempering, LLC ; Houston, TXTTG1/88040 UCOMPOSITE 3.0 A
TTG5/328041 UCOMPOSITE 4.0 A
TTG3/168042 UCOMPOSITE 5.0 A
TTG1/48043 UCOMPOSITE 6.0 A
TTG3/88044 UCOMPOSITE 10.0 A
TTG1/28045 UCOMPOSITE 12.0 A
Contour Industries, Inc. ; Surgoinsville, TNTTG1/81680 UCOMP+CAN 3.0 A
TTG5/324285 UCOMP+CAN 4.0 A
TTG3/161678 UCOMP+CAN 5.0 A
TTG1/41677 UCOMP+CAN 6.0 A
TTG5/164701 UCOMP+CAN 8.0 A
TTG3/84702 UCOMP+CAN 10.0 A
TPG1/84703 UCOMP+CAN 3.0 (s) A
TPG5/324704 UCOMP+CAN 4.0 (s)(IN) A
TPG3/164705 UCOMP+CAN 5.0 (s) A
Contract Glass ; Billerica, MATTG1/84970 UCOMPOSITE 3.0 A
TTG5/324971 UCOMPOSITE 4.0 A
TTG3/164972 UCOMPOSITE 5.0 A
TTG1/44973 UCOMPOSITE 6.0 A
TTG3/84974 UCOMPOSITE 10.0 A
TTG1/24975 UCOMPOSITE 12.0 A
Contractors Wardrobe ; Valencia, CATTG1/83464 UCOMP+CAN 3.0 A
TTG5/323465 UCOMP+CAN 4.0 A
TTG3/163466 UCOMP+CAN 5.0 A
TTG1/43467 UCOMP+CAN 6.0 A
TTG5/163468 UCOMP+CAN 8.0 A
TTG3/83469 UCOMP+CAN 10.0 A
TTG1/23470 UCOMP+CAN 12.0 A
TTG3/43472 UCOMP+CAN 19.0 A
TPG1/83473 UCOMP+CAN 3.0 (m) A
TPG5/323474 UCOMP+CAN 4.0 (m) A
TPG3/163475 UCOMP+CAN 5.0 (m) A
TPG1/43476 UCOMP+CAN 6.0 (s) A
TPG3/83477 UCOMP+CAN 10.0 (s) A
Control Glass, A&S, S.L. ; TeruelTTG5/327791 UCOMP+CAN 4.0 A
TTG1/47792 UCOMP+CAN 6.0 A
TTG3/87793 UCOMP+CAN 10.0 A
TTG*7988 UCOMP+CAN 12.0 (4) A
LTG(H)7794 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7795 UCOMP+CAN 12-16+ (ip)(A) A(.060)
Coral Industries Glass Division ; Tuscaloosa, ALTTG3/161910 UCOMPOSITE 5.0 A
TTG1/41911 UCOMPOSITE 6.0 A
TTG3/82144 UCOMPOSITE 10.0 A
TTG1/22145 UCOMPOSITE 12.0 A
TPG3/161964 UCOMPOSITE 5.0 (d) A
TPG1/42944 UCOMPOSITE 6.0 (d) A
TPG3/82945 UCOMPOSITE 10.0 (d) A
Core Fabrication Inc. ; Edison, NJTTG1/48145 UCOMP+CAN 6.0 A
TTG3/88146 UCOMP+CAN 10.0 A
Page 44
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
CRICURSA SA ; Balaguer, LleidaTTG1/45695 UCOMPOSITE 6.0 A
TTG5/166840 UCOMPOSITE 8.0 A
TTG3/85697 UCOMPOSITE 10.0 A
TTG1/25698 UCOMPOSITE 12.0 A
LTG(H)5699 UCOMPOSITE 12-16+ (b)(A) A(.015)LTG(H)5878 UCOMPOSITE 12-16+ (ip)(A) A(.035)
Crystal Tempering, Inc. ; Debary, FLTTG3/166209 UCOMPOSITE 5.0 A
TTG1/46210 UCOMPOSITE 6.0 A
TTG3/86211 UCOMPOSITE 10.0 A
TTG1/26212 UCOMPOSITE 12.0 A
TPG3/166214 UCOMPOSITE 5.0 (m) A
TPG1/46215 UCOMPOSITE 6.0 (s) A
TPG3/86216 UCOMPOSITE 10.0 (s) A
CS ECO Glass ; Negeri Sembilan, MalaysiaTTG3/166867 UCOMPOSITE 5.0 A
TTG1/46868 UCOMPOSITE 6.0 A
TTG5/166869 UCOMPOSITE 8.0 A
TTG3/86870 UCOMPOSITE 10.0 A
TTG1/26871 UCOMPOSITE 12.0 A
LTG(H)8239 UCOMPOSITE 10-16+ (b)(A) A(.015)Curved Glass Creations, LLC ; Pompano Beach, FL
LTG(H)7113 UCOMPOSITE 10-16+ (ev)(A) A(.060)Custom Glass Products Inc. ; Weston, WI
TTG1/44002 UCOMPOSITE 6.0 A
TTG1/26671 UCOMPOSITE 12.0 A
D3 Glass, LLC ; Fort Myers, FLTTG1/47627 UCOMPOSITE 6.0 A
TTG3/87628 UCOMPOSITE 10.0 A
TTG1/27629 UCOMPOSITE 12.0 A
TPG3/87626 UCOMPOSITE 10.0 (s) A
LTG(H)7625 UCOMPOSITE 12 (ev)(A) A(.030)Dalian Huaying Glass Limited Liability Co. ; Liaoning, China
TTG1/85260 UCOMP+CAN 3.0 A
TTG5/326639 UCOMP+CAN 4.0 A
TTG3/165261 UCOMP+CAN 5.0 A
Dallas Flat Glass ; Carrollton, TXTTG1/84790 UCOMPOSITE 3.0 A
TTG3/164763 UCOMPOSITE 5.0 A
TTG1/43701 UCOMPOSITE 6.0 A
TTG3/84566 UCOMPOSITE 10.0 A
TTG1/24567 UCOMPOSITE 12.0 A
TTG3/48174 UCOMPOSITE 19.0 A
Denver Glass Interiors, Inc. ; Englewood, COTTG3/163865 UCOMPOSITE 5.0 A
TTG1/43866 UCOMPOSITE 6.0 A
TTG3/83867 UCOMPOSITE 10.0 A
TTG1/23868 UCOMPOSITE 12.0 A
TPG3/167582 UCOMPOSITE 5.0 (m) A
TPG1/44507 UCOMPOSITE 6.0 (m) A
TPG3/84508 UCOMPOSITE 10.0 (s) A
LTG(H)6902 UCOMPOSITE 8-16+ (ip)(A) A(.060)LTG(H)6916 UCOMPOSITE 8-16+ (b)(A) A(.030)
Deqing Sanxing Plastic Chemical Co. Ltd. ; Huzhou, Zhejiang, China
TTG1/84055 UCOMPOSITE 3.0 A
TTG5/324056 UCOMPOSITE 4.0 A
TTG3/164057 UCOMPOSITE 5.0 A
TTG1/44146 UCOMPOSITE 6.0 A
TTG3/84147 UCOMPOSITE 10.0 A
Dillmeier Enterprise, Inc. ; Van Buren, ARTTG1/84838 UCOMPOSITE 3.0 A
TTG3/163912 UCOMPOSITE 5.0 A
TTG1/43913 UCOMPOSITE 6.0 A
TTG5/164839 UCOMPOSITE 8.0 A
TTG3/83914 UCOMPOSITE 10.0 A
TTG1/23915 UCOMPOSITE 12.0 A
TTG5/83916 UCOMPOSITE 16.0 A
TTG3/43917 UCOMPOSITE 19.0 A
LTG(S)7947 UCOMP+CAN 6 (ev)(A) A(.030)LTG(H)8088 UCOMP+CAN 10 (ev)(T) A(.030)LTG(H)8110 UCOMP+CAN 10 (ev)(A) A(.035)
Dlubak Specialty Glass Corporation ; Blairsville, PATTG1/43017 UCOMPOSITE 6.0 A
TTG1/23018 UCOMPOSITE 12.0 A
TTG3/43019 UCOMPOSITE 19.0 A
TBG1/45965 UCOMPOSITE 6.0 A
LTG(H)6234 UCOMPOSITE 12 (b)(A) A(.060)LTG(H)7016 UCOMPOSITE 12 (ip)(A) A(.060)
Dolphin Glass Specialists, LLC ; Hialeah, FLLTG(H)4729 UCOMPOSITE 12 (b)(A) A(.030)
Dolphin Temper Glass LLC ; Miami Gardens, FLTTG1/47840 UCOMPOSITE 6.0 A
Dongguan CSG Architectural Glass Co., Ltd. ; Dongguan, Guangdong, China
TTG5/323932 UCOMP+CAN 4.0 A
TTG3/163933 UCOMP+CAN 5.0 A
TTG1/43934 UCOMP+CAN 6.0 A
TTG5/163935 UCOMP+CAN 8.0 A
TTG3/83936 UCOMP+CAN 10.0 A
TTG1/23937 UCOMP+CAN 12.0 A
TTG*3938 UCOMP+CAN 15.0 (4) A
TTG3/43939 UCOMP+CAN 19.0 A
LTG(H)4167 UCOMP+CAN 8-16+ (b)(A) A(.030)Dongguan Dehui Industrial Co., LTD. ; Dongguan City, Guangdong
TTG1/87637 UCOMP+CAN 3.0 A
Dongguan Dongfa Glass Product Co., Ltd ; Dongguan, Guangdong, China
TTG5/164132 UCOMP+CAN 8.0 A
TTG3/84125 UCOMP+CAN 10.0 A
TTG1/24126 UCOMP+CAN 12.0 A
TTG*7620 UCOMP+CAN 15.0 (4) A
TTG3/47621 UCOMP+CAN 19.0 A
LTG(H)4123 UCOMP+CAN 12 (b)(A) A(.030)LTG(H)4124 UCOMP+CAN 16+ (b)(A) A(.030)
Page 45
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Double Seal Insulating Glass Ltd. ; Toronto, ONTTG1/88307 UCOMP+CAN 3.0 A
TTG5/328308 UCOMP+CAN 4.0 A
TTG3/168309 UCOMP+CAN 5.0 A
TTG1/48310 UCOMP+CAN 6.0 A
Downey Glass ; Pompano Beach, FLTTG3/162661 UCOMPOSITE 5.0 A
TTG1/42662 UCOMPOSITE 6.0 A
TTG5/165554 UCOMPOSITE 8.0 A
TTG3/82663 UCOMPOSITE 10.0 A
TTG1/22664 UCOMPOSITE 12.0 A
TTG3/42665 UCOMPOSITE 19.0 A
TPG3/163487 UCOMPOSITE 5.0 (s) A
TPG3/84626 UCOMPOSITE 10.0 (s) A
LTG(S)5121 UCOMPOSITE 6 (ip)(A) A(.035)LTG(H)5122 UCOMPOSITE 10-16+ (ip)(A) A(.035)
Eagle Valley Glass ; Gypsum, COTTG3/166672 UCOMPOSITE 5.0 A
TTG1/46673 UCOMPOSITE 6.0 A
TTG3/86674 UCOMPOSITE 10.0 A
TTG1/26675 UCOMPOSITE 12.0 A
Echols Glass and MIrror, Inc. ; Buford, GATTG1/87712 UCOMPOSITE 3.0 A
TTG3/166314 UCOMPOSITE 5.0 A
TTG1/46315 UCOMPOSITE 6.0 A
TTG3/86316 UCOMPOSITE 10.0 A
TTG1/26317 UCOMPOSITE 12.0 A
TPG3/166318 UCOMPOSITE 5.0 (m) A
TPG3/86319 UCOMPOSITE 10.0 (s) A
Eckelt Glas GmbH ; Steyr, AustriaTTG1/42850 UCOMPOSITE 6.0 A
TTG5/162851 UCOMPOSITE 8.0 A
TTG3/82852 UCOMPOSITE 10.0 A
TTG*2853 UCOMPOSITE 12.0 (4) A
TTG*2854 UCOMPOSITE 15.0 (4) A
TTG3/42855 UCOMPOSITE 19.0 A
LTG(H)6825 UCOMPOSITE 8,12,16+ (b)(A) A(.030)LTG(H)6901 UCOMPOSITE 10-16+ (ip)(A) A(.060)
ECO Glass Production ; Medley, FlLTG(H)8276 UCOMP+CAN 12 (b)(A) A(.090)
Edge Tempering ; Hialeah, FLTTG3/167280 UCOMPOSITE 5.0 A
TTG1/46297 UCOMPOSITE 6.0 A
TTG3/86298 UCOMPOSITE 10.0 A
TTG1/26299 UCOMPOSITE 12.0 A
EFCO Corporation ; Monett, MOTTG1/84121 UCOMPOSITE 3.0 A
TTG3/161901 UCOMPOSITE 5.0 A
TTG1/41902 UCOMPOSITE 6.0 A
TTG5/164154 UCOMPOSITE 8.0 A
TPG3/162143 UCOMPOSITE 5.0 (s) A
Engineered Glass Products, L.L.C. ; Chicago, ILTTG1/84388 26x7COMPOSITE 3.0 A
TTG5/322589 26x7COMPOSITE 4.0 A
TTG3/168185 26 x 72
COMPOSITE 5.0 A
Epta S.P.A. ; Limana, BellunoTTG5/327934 UCOMP+CAN 4.0 A
Erdem Dis Ticaret A.S. ; Istanbul, PendikTTG1/47609 UCOMP+CAN 6.0 A
TTG5/167610 UCOMP+CAN 8.0 A
TTG3/87611 UCOMP+CAN 10.0 A
LTG(H)7612 UCOMP+CAN 10-16+ (b)(A) A(.030)Euroglas-De Landtsheer NV ; Bornem, Belgium
TTG1/48147 UCOMPOSITE 6.0 A
TTG5/168148 UCOMPOSITE 8.0 A
TTG3/88149 UCOMPOSITE 10.0 A
TTG1/28150 UCOMPOSITE 12.0 A
Extrusiones de Aluminio, S.A. ; Santo Domingo, HerediaTTG1/48157 UCOMPOSITE 6.0 A
TTG3/88158 UCOMPOSITE 10.0 A
TTG*8159 UCOMPOSITE 12.0 (4) A
LTG(H)8161 UCOMPOSITE 10-16+ (b)(A) A(.030)LTG(H)8160 UCOMPOSITE 10-16+ (ip)(A) A(.035)
Fairis C.A. ; Ambato, Tungurahua, EcuadorTTG5/324425 UCOMPOSITE 4.0 A
TTG3/164426 UCOMPOSITE 5.0 A
TTG1/44427 UCOMPOSITE 6.0 A
TTG5/164428 UCOMPOSITE 8.0 A
TTG3/84429 UCOMPOSITE 10.0 A
LTG(S)4722 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)4430 UCOMPOSITE 10-12 (b)(A) A(.030)
Flat Glass Distributors ; Jacksonville, FLTTG1/83822 UCOMPOSITE 3.0 A
TTG3/163823 UCOMPOSITE 5.0 A
TTG1/43824 UCOMPOSITE 6.0 A
TTG3/83825 UCOMPOSITE 10.0 A
TTG1/23826 UCOMPOSITE 12.0 A
TPG1/83828 UCOMPOSITE 3.0 (m) A
TPG3/163830 UCOMPOSITE 5.0 (m) A
TPG1/43831 UCOMPOSITE 6.0 (s) A
TPG3/84638 UCOMPOSITE 10.0 (s) A
Flat Glass Group Co., Ltd. ; Jiaxing, Zhejiang, ChinaTTG3/165521 UCOMP+CAN 5.0 A
TTG1/45522 UCOMP+CAN 6.0 A
TTG5/165523 UCOMP+CAN 8.0 A
TTG3/85524 UCOMP+CAN 10.0 A
TPG5/326898 UCOMP+CAN 4.0 (m) A
LTG(H)5526 UCOMP+CAN 10-16+ (b)(HS) A(.030)Foshan Ganghuasheng Tempered Glass Co; Ltd ; Foshan, GuangDong
TTG5/327713 UCOMP+CAN 4.0 A
TTG3/167714 UCOMP+CAN 5.0 A
TTG1/48163 UCOMP+CAN 6.0 A
TTG5/167557 UCOMP+CAN 8.0 A
TTG3/87558 UCOMP+CAN 10.0 A
TTG1/27559 UCOMP+CAN 12.0 A
TBG3/167715 UCOMP+CAN 5.0 A
TBG1/47716 UCOMP+CAN 6.0 A
TBG5/167560 UCOMP+CAN 8.0 A
TBG3/87561 UCOMP+CAN 10.0 A
Page 46
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Foshan Gaoming Yaqi Toughened Glass ; Foshan City, Guangdong Province
TTG1/46119 UCOMP+CAN 6.0 A
TTG5/166120 UCOMP+CAN 8.0 A
TTG3/86121 UCOMP+CAN 10.0 A
TTG1/26122 UCOMP+CAN 12.0 A
TPG5/167717 UCOMP+CAN 8.0 (s) A
TBG1/46123 UCOMP+CAN 6.0 A
TBG5/166124 UCOMP+CAN 8.0 A
Foshan Nanhai Nengyang Electrical Technology Co., Ltd. ; Foshan, Guangdong
TTG3/168260 UCOMPOSITE 5.0 A
TTG1/48261 UCOMPOSITE 6.0 A
TTG5/168262 UCOMPOSITE 8.0 A
TTG3/88263 UCOMPOSITE 10.0 A
Fountain Glass Inc. ; Lenexa, KSTTG3/167105 UCOMPOSITE 5.0 A
TTG1/47101 UCOMPOSITE 6.0 A
TTG3/87106 UCOMPOSITE 10.0 A
TTG1/27104 UCOMPOSITE 12.0 A
TPG3/167102 UCOMPOSITE 5.0 (m) A
TPG1/47100 UCOMPOSITE 6.0 (s) A
TPG3/87103 UCOMPOSITE 10.0 (s) A
Fujian Chengda Glass Co., Ltd ; Longhai, ZhangzhouTTG1/87182 UCOMPOSITE 3.0 A
TTG5/327183 UCOMPOSITE 4.0 A
TTG3/167874 UCOMPOSITE 5.0 A
TTG1/47185 UCOMPOSITE 6.0 A
TTG5/167186 UCOMPOSITE 8.0 A
TTG3/87187 UCOMPOSITE 10.0 A
TTG1/27188 UCOMPOSITE 12.0 A
Fujian Tider Glass Co., Ltd. ; Xiamen, FujianTTG5/327784 UCOMPOSITE 4.0 A
TTG3/167785 UCOMPOSITE 5.0 A
TTG1/47786 UCOMPOSITE 6.0 A
TTG5/167787 UCOMPOSITE 8.0 A
TTG3/87788 UCOMPOSITE 10.0 A
TTG1/27789 UCOMPOSITE 12.0 A
Fujian Xihe Sanitary Ware Technology Co., Ltd ; Nan an Fujian China
TTG5/328023 UCOMPOSITE 4.0 A
TTG3/168024 UCOMPOSITE 5.0 A
TTG1/48025 UCOMPOSITE 6.0 A
TTG5/168026 UCOMPOSITE 8.0 A
TBG3/168030 UCOMPOSITE 5.0 A
TBG1/48031 UCOMPOSITE 6.0 A
TBG5/168032 UCOMPOSITE 8.0 A
G.E. Silliker & Sons Ltd. ; Borden-Carleton, PEITTG1/88224 UCOMP+CAN 3.0 A
TTG5/328225 UCOMP+CAN 4.0 A
TTG3/168226 UCOMP+CAN 5.0 A
TTG1/48227 UCOMP+CAN 6.0 A
TTG5/168228 UCOMP+CAN 8.0 A
TTG3/88229 UCOMP+CAN 10.0 A
TTG1/28230 UCOMP+CAN 12.0 A
TTG5/88231 UCOMP+CAN 16.0 A
TTG3/48232 UCOMP+CAN 19.0 A
Galaxy Glass & Stone ; Fairfield, NJLTG(H)3661 UCOMP+CAN 8-16+ (lu)(A) A(.060)LTG(H)5752 UCOMP+CAN 8-16+ (ev)(A) A(.060)
Gardner Glass Products Inc. ; North Wilkesboro, NCLTG(S)7436 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7437 UCOMP+CAN 12 (ip)(A) A(.060)LTG(H)7438 UCOMP+CAN 16+ (b)(A) A(.030)
Garibaldi Glass Ind. Inc. ; Burnaby, BCTTG3/165124 UCOMP+CAN 5.0 A
TTG1/44419 UCOMP+CAN 6.0 A
TTG5/165219 UCOMP+CAN 8.0 A
TTG3/84420 UCOMP+CAN 10.0 A
TTG1/24421 UCOMP+CAN 12.0 A
TTG*5125 UCOMP+CAN 15.0 (4) A
TTG3/44422 UCOMP+CAN 19.0 A
LTG(S)7380 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)6767 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)6766 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)6768 UCOMP+CAN 8-16+ (ip)(A) A(.035)
General Glass ; Vancouver, WATTG1/84031 UCOMPOSITE 3.0 A
TTG5/324032 UCOMPOSITE 4.0 A
TTG3/164033 UCOMPOSITE 5.0 A
TTG1/44034 UCOMPOSITE 6.0 A
TTG3/87710 UCOMPOSITE 10.0 A
TTG1/25751 UCOMPOSITE 12.0 A
TPG1/85750 UCOMPOSITE 3.0 (s) A
TPG3/167478 UCOMPOSITE 5.0 (m) A
GGI Glass Distributors Corp. ; Secaucus, NJTTG5/322928 UCOMPOSITE 4.0 (IN) A
TTG3/162226 UCOMPOSITE 5.0 A
TTG1/42227 UCOMPOSITE 6.0 A
TTG5/164248 UCOMPOSITE 8.0 A
TTG3/82282 UCOMPOSITE 10.0 A
TTG1/22228 UCOMPOSITE 12.0 A
TTG5/83857 UCOMPOSITE 16.0 A
TTG3/43858 UCOMPOSITE 19.0 A
TTG14774 UCOMPOSITE 25.0 (IN) A
TPG5/323970 UCOMPOSITE 4.0 (s)(IN) A
TPG3/163971 UCOMPOSITE 5.0 (m) A
TPG1/43972 UCOMPOSITE 6.0 (m) A
TPG3/83973 UCOMPOSITE 10.0 (s) A
TPG1/23974 UCOMPOSITE 12.0 (s)(IN) A
Gin Jye Ming Glass Co., Ltd. ; TaiwanTTG3/167868 UCOMP+CAN 5.0 A
LTG(S)7869 UCOMP+CAN 6 (b)(A) A(.015)
Page 47
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
GLAAM Co., Ltd. ; South KoreaLTG(H)7928 UCOMP+CAN 10 (lu)(A) B(.098)
GLASPRO ; Santa Fe Springs, CATTG1/46047 UCOMP+CAN 6.0 A
TTG1/26048 UCOMP+CAN 12.0 A
LTG(H)6050 UCOMP+CAN 8-16+ (b)(A) A(.030) Glass and Mirror Craft ; Wixom, MI
TTG1/84198 UCOMP+CAN 3.0 A
TTG5/325116 UCOMP+CAN 4.0 A
TTG3/164199 UCOMP+CAN 5.0 A
TTG1/44200 UCOMP+CAN 6.0 A
TTG3/85598 UCOMP+CAN 10.0 A
TTG1/24202 UCOMP+CAN 12.0 A
TTG5/84203 UCOMP+CAN 16.0 A
TTG3/44204 UCOMP+CAN 19.0 A
LTG(H)4924 UCOMP+CAN 12-16+ (ip)(A) A(.035)Glass Deluxe Inc. ; Hialeah, FL
LTG(H)8285 UCOMPOSITE 12 (ip)(A) A(.060)Glass Depot Inc. ; Opa Locka, FL
TTG3/167180 UCOMPOSITE 5.0 A
TTG1/47181 UCOMPOSITE 6.0 A
TTG3/86633 UCOMPOSITE 10.0 A
TTG1/26634 UCOMPOSITE 12.0 A
Glass Design of Miami, Inc. ; Medley, FLTTG1/47145 UCOMPOSITE 6.0 A
TTG3/87144 UCOMPOSITE 10.0 A
TTG1/27143 UCOMPOSITE 12.0 A
Glass Enterprises, Inc. ; Bensalem, PATTG3/164628 UCOMPOSITE 5.0 A
TTG1/44629 UCOMPOSITE 6.0 A
TTG3/86597 UCOMPOSITE 10.0 A
TTG1/26598 UCOMPOSITE 12.0 A
Glassbel Baltic ; Klaipeda, LithuaniaTTG1/46706 UCOMPOSITE 6.0 A
TTG5/166707 UCOMPOSITE 8.0 A
TTG3/86708 UCOMPOSITE 10.0 A
TTG1/26709 UCOMPOSITE 12.0 A
LTG(H)7524 UCOMPOSITE 8-16+ (ip)(A) A(.035)LTG(H)8049 UCOMPOSITE 8-16+ (b)(A) A(.030)
GlassecViracon ; Nazaré Paulista, São PauloTTG5/327927 UCOMP+CAN 4.0 A
TTG3/166992 UCOMP+CAN 5.0 A
TTG1/46993 UCOMP+CAN 6.0 A
TTG5/166994 UCOMP+CAN 8.0 A
TTG3/86995 UCOMP+CAN 10.0 A
TTG1/26996 UCOMP+CAN 12.0 A
LTG(H)6998 UCOMP+CAN 8,16+ (ip)(HS) A(.035)LTG(H)6997 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7084 UCOMP+CAN 12 (ip)(A) A(.060)
GlassFab Tempering Services Inc. Holly Drive ; Tracy, CATTG1/86118 UCOMPOSITE 3.0 A
TTG3/165986 UCOMPOSITE 5.0 A
TTG1/47024 UCOMPOSITE 6.0 A
TTG3/85988 UCOMPOSITE 10.0 A
TTG1/25989 UCOMPOSITE 12.0 A
TTG3/45990 UCOMPOSITE 19.0 A
GlassFab Tempering Services, Inc. Mariani Ct. ; Tracy, CATTG1/87799 UCOMPOSITE 3.0 A
TTG3/164889 UCOMPOSITE 5.0 A
TTG1/44891 UCOMPOSITE 6.0 A
TTG3/87023 UCOMPOSITE 10.0 A
TTG1/24890 UCOMPOSITE 12.0 A
TTG3/44893 UCOMPOSITE 19.0 A
TPG1/87796 UCOMPOSITE 3.0 (s) A
TPG5/325128 UCOMPOSITE 4.0 (d) A
TPG3/167797 UCOMPOSITE 5.0 (m) A
TPG1/47798 UCOMPOSITE 6.0 (s) A
TPG3/84897 UCOMPOSITE 10.0 (m) A
Glasstech Industries B.S.C. ; Hidd, Manama, BahrainTTG5/327298 UCOMPOSITE 4.0 A
TTG1/47299 UCOMPOSITE 6.0 A
TTG5/167300 UCOMPOSITE 8.0 A
LTG(H)7305 UCOMPOSITE 8,12-16+ (ip)(A) A(.035)LTG(H)7306 UCOMPOSITE 8,12-16+ (b)(A) A(.015)
GlassTemp, Inc. ; Bellwood, ILTTG3/168151 UCOMPOSITE 5.0 A
TTG1/47695 UCOMPOSITE 6.0 A
TTG3/87696 UCOMPOSITE 10.0 A
TTG1/27697 UCOMPOSITE 12.0 A
Glasswerks GWA- West ; South Gate CATTG5/325480 UCOMPOSITE 4.0 A
TTG3/165481 UCOMPOSITE 5.0 A
TTG1/45482 UCOMPOSITE 6.0 A
Glasswerks GWLA- East ; South Gate, CATTG1/84804 UCOMPOSITE 3.0 A
TTG5/325882 UCOMPOSITE 4.0 A
TTG3/164805 UCOMPOSITE 5.0 A
TTG1/44806 UCOMPOSITE 6.0 A
TTG3/85883 UCOMPOSITE 10.0 A
TTG1/25884 UCOMPOSITE 12.0 A
TTG5/86921 UCOMPOSITE 16.0 A
TTG3/45885 UCOMPOSITE 19.0 A
LTG(S)7074 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)6057 UCOMPOSITE 8-16+ (ip)(A) A(.035)LTG(H)5886 UCOMPOSITE 8-16+ (b)(A) A(.030)
Glasswerks GWT ; Temecula, CATTG3/166095 UCOMP+CAN 5.0 A
TTG1/46096 UCOMP+CAN 6.0 A
TTG3/86097 UCOMP+CAN 10.0 A
TTG1/26098 UCOMP+CAN 12.0 A
Page 48
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Glaz-Tech Industries, Inc. ; Albuquerque, NMTTG1/86589 UCOMPOSITE 3.0 A
TTG3/166590 UCOMPOSITE 5.0 A
TTG1/46594 UCOMPOSITE 6.0 A
TTG3/86591 UCOMPOSITE 10.0 A
TTG1/26592 UCOMPOSITE 12.0 A
TPG3/166595 UCOMPOSITE 5.0 (m) A
TPG3/86593 UCOMPOSITE 10.0 (s) A
Glaz-Tech Industries, Inc. ; Boise, IDTTG1/86607 UCOMPOSITE 3.0 A
TTG3/166608 UCOMPOSITE 5.0 A
TTG1/46609 UCOMPOSITE 6.0 A
TTG3/86610 UCOMPOSITE 10.0 A
TTG1/26611 UCOMPOSITE 12.0 A
TPG3/166713 UCOMPOSITE 5.0 (m) A
TPG3/86612 UCOMPOSITE 10.0 (s) A
Glaz-Tech Industries, Inc. ; Englewood, COTTG1/82185 UCOMPOSITE 3.0 A
TTG3/162186 UCOMPOSITE 5.0 A
TTG1/42187 UCOMPOSITE 6.0 A
TTG3/85143 UCOMPOSITE 10.0 A
TTG1/22189 UCOMPOSITE 12.0 A
TPG3/162193 UCOMPOSITE 5.0 (m) A
Glaz-Tech Industries, Inc. ; Phoenix, AZTTG1/86582 UCOMPOSITE 3.0 A
TTG3/166583 UCOMPOSITE 5.0 A
TTG1/46584 UCOMPOSITE 6.0 A
TTG3/86585 UCOMPOSITE 10.0 A
TTG1/26586 UCOMPOSITE 12.0 A
TPG3/166587 UCOMPOSITE 5.0 (m) A
TPG3/86588 UCOMPOSITE 10.0 (s) A
Glaz-Tech Industries, Inc. ; Santa Teresa, NMTTG1/86599 UCOMPOSITE 3.0 A
TTG3/166600 UCOMPOSITE 5.0 A
TTG1/46601 UCOMPOSITE 6.0 A
TTG3/86602 UCOMPOSITE 10.0 A
TTG1/26603 UCOMPOSITE 12.0 A
TPG1/86604 UCOMPOSITE 3.0 (s) A
TPG3/166605 UCOMPOSITE 5.0 (m) A
TPG3/86606 UCOMPOSITE 10.0 (s) A
Glaz-Tech Industries, Inc. ; Tucson, AZTTG1/86574 UCOMPOSITE 3.0 A
TTG3/166575 UCOMPOSITE 5.0 A
TTG1/46576 UCOMPOSITE 6.0 A
TTG3/86577 UCOMPOSITE 10.0 A
TTG1/26578 UCOMPOSITE 12.0 A
TPG1/86579 UCOMPOSITE 3.0 (s) A
TPG3/166580 UCOMPOSITE 5.0 (m) A
TPG3/86581 UCOMPOSITE 10.0 (s) A
Glenny Glass Co. ; Milford, OHTTG1/83841 UCOMPOSITE 3.0 A
TTG3/163843 UCOMPOSITE 5.0 A
TTG1/43844 UCOMPOSITE 6.0 A
TTG3/83845 UCOMPOSITE 10.0 A
TTG1/23846 UCOMPOSITE 12.0 A
LTG(H)7937 UCOMPOSITE 8 (ev)(HS) A(.060)LTG(H)7938 UCOMPOSITE 10 (ev)(A) A(.030)
Global Security Glazing ; Selma, ALTTG1/84764 UCOMP+CAN 3.0 A
TTG3/164765 UCOMP+CAN 5.0 A
TTG1/44766 UCOMP+CAN 6.0 A
TTG3/84767 UCOMP+CAN 10.0 A
TTG1/24768 UCOMP+CAN 12.0 A
LTG(S)4769 UCOMP+CAN 6 (b)(A) A(.035)LTG(H)4770 UCOMP+CAN 12 (b)(A) A(.060)
GnT Glass Co., Ltd. ; Dongguan, Guangdong, ChinaTTG1/46540 UCOMP+CAN 6.0 A
TTG5/165788 UCOMP+CAN 8.0 A
TTG3/85789 UCOMP+CAN 10.0 A
TTG*5790 UCOMP+CAN 12.0 (4) A
LTG(H)5791 UCOMP+CAN 10-16+ (b)(A) A(.060)LTG(H)7131 UCOMP+CAN 10 (ip)(A) A(.060)
Goldray Industries Ltd. ; Calgary, AB CanadaTTG5/322445 UCOMP+CAN 4.0 A
TTG3/162446 UCOMP+CAN 5.0 A
TTG1/42447 UCOMP+CAN 6.0 A
TTG3/82448 UCOMP+CAN 10.0 A
TTG1/22449 UCOMP+CAN 12.0 A
Griffin Glass & Metal Werks, Inc. ; Elmhurst, ILTTG3/167146 UCOMP+CAN 5.0 A
TTG1/47147 UCOMP+CAN 6.0 A
TTG5/167201 UCOMP+CAN 8.0 A
TTG3/87202 UCOMP+CAN 10.0 A
TTG1/27148 UCOMP+CAN 12.0 A
TTG3/47284 UCOMP+CAN 19.0 A
Grupo Vidrios el Castillo ; Escobedo, Nuevo Leon, MexicoTTG1/87583 UCOMP+CAN 3.0 A
TTG1/45840 UCOMP+CAN 6.0 A
TTG3/85781 UCOMP+CAN 10.0 A
LTG(S)6083 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)6058 UCOMP+CAN 6 (b)(A) B(.015)
G-TECH Optoelectronics Corporation ; Taiwan, ChinaTTG1/47922 UCOMP+CAN 6.0 A
TTG5/168052 UCOMP+CAN 8.0 A
LSP(H)7489 UCOMP+CAN 10-16+ (b)(A) A.030x2 ECx1LSP(H)7832 UCOMP+CAN 12-16+ (b)(A) A.030x3 ECx2
Page 49
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Guangdong Haikong Special Glass Technology Co., Ltd. ; Guangdong, China
TTG1/47363 UCOMPOSITE 6.0 A
TTG5/167364 UCOMPOSITE 8.0 A
TTG3/87365 UCOMPOSITE 10.0 A
TTG1/27366 UCOMPOSITE 12.0 A
TTG*7367 UCOMPOSITE 15.0 (4) A
TTG3/47368 UCOMPOSITE 19.0 A
LTG(H)7404 UCOMP+CAN 12,16+ (ip)(A) A(.035)LTG(H)7369 UCOMP+CAN 12,16+ (b)(A) A(.060)
Guangdong Rosery Bath Science and Technology Co.,Ltd. ; Taishan City, Guangdong Province
TTG3/168241 UCOMP+CAN 5.0 A
TTG1/48242 UCOMP+CAN 6.0 A
TTG5/168243 UCOMP+CAN 8.0 A
TTG3/88244 UCOMP+CAN 10.0 A
Guangdong South Star Glass Limited ; Foshan, Guangdong
TTG5/167974 UCOMPOSITE 8.0 A
TTG3/87975 UCOMPOSITE 10.0 A
TTG1/27976 UCOMPOSITE 12.0 A
TTG*7977 UCOMPOSITE 15.0 (4) A
TTG3/47978 UCOMPOSITE 19.0 A
LTG(H)7979 UCOMPOSITE 12, 16+ (b)(T) A(.030)Guardian Fabrication, LLC ; Galax, VA
TTG1/84604 UCOMP+CAN 3.0 A
TTG5/324605 UCOMP+CAN 4.0 A
TTG3/164606 UCOMP+CAN 5.0 A
TTG1/44607 UCOMP+CAN 6.0 A
TTG3/84609 UCOMP+CAN 10.0 A
TTG1/24610 UCOMP+CAN 12.0 A
TPG1/84612 UCOMP+CAN 3.0 (s) A
TPG3/164613 UCOMP+CAN 5.0 (m) A
TPG3/84627 UCOMP+CAN 10.0 (s) A
LTG(S)4633 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4829 UCOMP+CAN 8-10 (b)(p)(el)(6)(A) A(.075)LTG(H)4658 UCOMP+CAN 8 (b)(A) A(.030)
Guardian Fabrication, LLC ; Galax, VA (1005 Meadow Street)
TTG1/88001 UCOMP+CAN 3.0 A
TTG5/328002 UCOMP+CAN 4.0 A
TTG3/168003 UCOMP+CAN 5.0 A
TTG1/48004 UCOMP+CAN 6.0 A
TTG5/168091 UCOMP+CAN 8.0 A
TTG3/88005 UCOMP+CAN 10.0 A
TTG1/28006 UCOMP+CAN 12.0 A
TPG1/88007 UCOMP+CAN 3.0 (m) A
TPG5/328008 UCOMP+CAN 4.0 (m) A
TPG3/168009 UCOMP+CAN 5.0 (m) A
TPG1/48010 UCOMP+CAN 6.0 (m) A
TPG3/88011 UCOMP+CAN 10.0 (m) A
Guardian Fabrication, LLC ; Sun Prairie, WITTG1/85640 UCOMP+CAN 3.0 A
TTG5/325641 UCOMP+CAN 4.0 A
TTG3/165642 UCOMP+CAN 5.0 A
TTG1/45643 UCOMP+CAN 6.0 A
TTG5/166570 UCOMP+CAN 8.0 A
TPG1/85644 UCOMP+CAN 3.0 (d) A
TPG5/325645 UCOMP+CAN 4.0 (d) A
TPG3/165646 UCOMP+CAN 5.0 (d) A
TPG1/45647 UCOMP+CAN 6.0 (d) A
Guardian Glass, LLC ; Corsicana, TXTTG1/81248 UCOMP+CAN 3.0 A
TTG5/321249 UCOMP+CAN 4.0 A
TTG3/161250 UCOMP+CAN 5.0 A
TTG1/41251 UCOMP+CAN 6.0 A
TTG5/161826 UCOMP+CAN 8.0 A
TTG3/81253 UCOMP+CAN 10.0 A
TTG1/21803 UCOMP+CAN 12.0 A
TPG1/82458 UCOMP+CAN 3.0 (m) A
TPG5/322459 UCOMP+CAN 4.0 (m) A
TPG3/162460 UCOMP+CAN 5.0 (m) A
TPG1/45142 UCOMP+CAN 6.0 (m) A
TPG3/85133 UCOMP+CAN 10.0 (m) A
Guardian Glass, LLC ; DeWitt, IATTG1/82020 UCOMP+CAN 3.0 A
TTG5/322021 UCOMP+CAN 4.0 A
TTG3/162022 UCOMP+CAN 5.0 A
TTG1/42023 UCOMP+CAN 6.0 A
TTG5/162024 UCOMP+CAN 8.0 A
TTG3/82545 UCOMP+CAN 10.0 A
TTG1/22649 UCOMP+CAN 12.0 A
Guardian Glass, LLC ; Geneva, NYTTG1/82259 UCOMP+CAN 3.0 A
TTG5/322260 UCOMP+CAN 4.0 A
TTG3/162261 UCOMP+CAN 5.0 A
TTG1/42262 UCOMP+CAN 6.0 A
TTG5/163672 UCOMP+CAN 8.0 A
TTG3/82519 UCOMP+CAN 10.0 A
TTG1/23673 UCOMP+CAN 12.0 A
Guardian Glass, LLC ; Kingsburg, CATTG1/8968 UCOMP+CAN 3.0 A
TTG5/32969 UCOMP+CAN 4.0 A
TTG3/16970 UCOMP+CAN 5.0 A
TTG1/4971 UCOMP+CAN 6.0 A
TPG1/81303 UCOMP+CAN 3.0 (d) A
TPG5/321301 UCOMP+CAN 4.0 (m) A
TPG3/161304 UCOMP+CAN 5.0 (m) A
TPG1/41882 UCOMP+CAN 6.0 (m) A
Page 50
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Guardian Glass, LLC ; Richburg, SCTTG1/81630 UCOMP+CAN 3.0 A
TTG5/321631 UCOMP+CAN 4.0 A
TTG3/161632 UCOMP+CAN 5.0 A
TTG1/41633 UCOMP+CAN 6.0 A
TTG5/162382 UCOMP+CAN 8.0 A
TTG3/81634 UCOMP+CAN 10.0 A
TPG1/81683 UCOMP+CAN 3.0 (m) A
TPG5/321635 UCOMP+CAN 4.0 (m) A
TPG3/161865 UCOMP+CAN 5.0 (m) A
TPG1/43002 UCOMP+CAN 6.0 (m) A
TPG3/83003 UCOMP+CAN 10.0 (m) A
Gulf Glass Industries, LLC ; Sharjah, United Arab Emirates
TTG1/44796 UCOMPOSITE 6.0 A
TTG5/166326 UCOMPOSITE 8.0 A
TTG3/84797 UCOMPOSITE 10.0 A
TTG*4798 UCOMPOSITE 12.0 (7) A
LTG(H)4799 UCOMPOSITE 8 (b)(A) A(.030)Huahui Glass (China) Co., LD ; Quanzhou City, China
TTG5/325843 UCOMPOSITE 4.0 A
Imagic Glass Inc. ; Concord, OntarioLTG(H)7355 UCOMP+CAN 12 (b)(A) A(.060)LTG(H)7356 UCOMP+CAN 12 (ev)(A) A(.015)
Industrial Tempering Glass ; Brooklyn, NYTTG1/46985 UCOMPOSITE 6.0 A
TTG3/83418 UCOMPOSITE 10.0 A
TTG1/23419 UCOMPOSITE 12.0 A
TTG5/88294 UCOMPOSITE 16.0 A
TTG3/44240 UCOMPOSITE 19.0 A
Industries Vanier Inc. ; Anjou, QCTTG1/86952 UCOMP+CAN 3.0 A
TTG5/326953 UCOMP+CAN 4.0 A
TTG3/166954 UCOMP+CAN 5.0 A
TTG1/46955 UCOMP+CAN 6.0 A
TTG5/166956 UCOMP+CAN 8.0 A
TTG3/86957 UCOMP+CAN 10.0 A
TTG1/26958 UCOMP+CAN 12.0 A
TTG5/86959 UCOMP+CAN 16.0 A
TTG3/46960 UCOMP+CAN 19.0 A
Inkan Ltd ; Brampton, ONTTG1/45135 UCOMP+CAN 6.0 A
TTG5/165136 UCOMP+CAN 8.0 A
TTG3/85137 UCOMP+CAN 10.0 A
TTG1/25138 UCOMP+CAN 12.0 A
TTG5/85139 UCOMP+CAN 16.0 A
TTG3/45140 UCOMP+CAN 19.0 A
Innovative Glass Products LLC ; Carrollton, TXTTG1/87062 UCOMPOSITE 3.0 A
TTG5/327063 UCOMPOSITE 4.0 A
TTG3/167064 UCOMPOSITE 5.0 A
TTG1/47065 UCOMPOSITE 6.0 A
Insulite Glass Co., Inc. ; Olathe, KSTTG1/84473 UCOMPOSITE 3.0 A
TTG5/324474 UCOMPOSITE 4.0 A
TTG3/163714 UCOMPOSITE 5.0 A
TTG1/43715 UCOMPOSITE 6.0 A
TTG3/83716 UCOMPOSITE 10.0 A
TTG1/23717 UCOMPOSITE 12.0 A
LTG(S)3718 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)3720 UCOMPOSITE 8 (b)(A) A(.060)LTG(H)5513 UCOMPOSITE 10-12 (b)(A) A(.030)
Integral Seal Mfg. Inc. ; Concord, ON CanadaTTG5/324682 UCOMP+CAN 4.0 A
TTG3/164683 UCOMP+CAN 5.0 A
TTG1/44684 UCOMP+CAN 6.0 A
LTG(H)7245 UCOMP+CAN 10-12 (ev)(A) A(.060)Integrity Glass Tempering, LLC. ; Venice , FL
TTG3/166666 UCOMPOSITE 5.0 A
TTG1/46635 UCOMPOSITE 6.0 A
TTG3/86636 UCOMPOSITE 10.0 A
TTG1/26637 UCOMPOSITE 12.0 A
TPG3/167097 UCOMPOSITE 5.0 (m) A
Inter Fonction Ltee ; Sherbrooke, QuebecTTG3/87235 UCOMP+CAN 10.0 A
TTG1/28089 UCOMP+CAN 12.0 A
Intex Glass (Xiamen) Co., Ltd. ; Xiamen, Fujian, ChinaTTG1/82572 UCOMP+CAN 3.0 A
TTG5/322573 UCOMP+CAN 4.0 A
TTG3/162574 UCOMP+CAN 5.0 A
TTG1/42575 UCOMP+CAN 6.0 A
TTG5/163025 UCOMP+CAN 8.0 A
TTG3/82576 UCOMP+CAN 10.0 A
TTG1/22577 UCOMP+CAN 12.0 A
TPG1/86131 UCOMP+CAN 3.0 (m) A
TPG5/326132 UCOMP+CAN 4.0 (s) A
TPG1/46133 UCOMP+CAN 6.0 (s) A
Intigral ; Quakertown, PATTG1/88200 UCOMP+CAN 3.0 A
TTG5/328201 UCOMP+CAN 4.0 A
TTG3/168202 UCOMP+CAN 5.0 A
TPG1/88199 UCOMP+CAN 3.0 (s) A
Intigral ; Walton Hills, OHTTG1/82050 UCOMP+CAN 3.0 A
TTG5/322051 UCOMP+CAN 4.0 A
TTG3/162052 UCOMP+CAN 5.0 A
TTG1/42055 UCOMP+CAN 6.0 A
TPG1/83631 UCOMP+CAN 3.0 (m) A
TPG5/324588 UCOMP+CAN 4.0 (m) A
TPG3/168048 UCOMP+CAN 5.0 (m) A
Isoterglass SRL ; Galliera Veneta, PadovaTTG3/168169 UCOMP+CAN 5.0 A
TTG1/48170 UCOMP+CAN 6.0 A
TTG5/168171 UCOMP+CAN 8.0 A
TTG3/88172 UCOMP+CAN 10.0 A
TTG1/28173 UCOMP+CAN 12.0 A
Page 51
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
J&C International Ltd. ; Zhejiang, ChinaTTG1/86676 UCOMP+CAN 3.0 A
TTG5/328209 UCOMP+CAN 4.0 A
TBG5/328205 UCOMP+CAN 4.0 A
TBG3/168206 UCOMP+CAN 5.0 A
J&Y Glass Services ; Naples, FLTTG1/48077 UCOMPOSITE 6.0 A
TTG3/88078 UCOMPOSITE 10.0 A
TTG1/28079 UCOMPOSITE 12.0 A
J.C. Moag Corporation ; Georgetown, INLTG(H)8238 UCOMPOSITE 10-16+ (ev)(A) A(.060)
Jiangmen Jianghai Jin Ying Tempered Glass Ltd. ; Jiangmen City, Guangdong
TTG3/167574 UCOMP+CAN 5.0 A
TTG1/47575 UCOMP+CAN 6.0 A
TTG5/167576 UCOMP+CAN 8.0 A
TTG3/87577 UCOMP+CAN 10.0 A
TTG*7578 UCOMP+CAN 12.0 (4) A
Jiangmen SYP Engineering Glass Co, Ltd. ; Guangdong, China
TTG5/324303 UCOMP+CAN 4.0 A
TTG3/164304 UCOMP+CAN 5.0 A
TTG1/44305 UCOMP+CAN 6.0 A
TTG5/164306 UCOMP+CAN 8.0 A
TTG3/84307 UCOMP+CAN 10.0 A
TTG1/24308 UCOMP+CAN 12.0 A
TTG*4309 UCOMP+CAN 15.0 (4) A
TTG3/44310 UCOMP+CAN 19.0 A
TBG1/45052 UCOMP+CAN 6.0 A
TBG5/165053 UCOMP+CAN 8.0 A
TBG3/85054 UCOMP+CAN 10.0 A
TBG1/25055 UCOMP+CAN 12.0 A
LTG(H)4312 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4575 UCOMP+CAN 10-16+ (ip)(A) A(.060)
Jiangsu Chunge Glass Co., Ltd. ; Nantong City, Jiangsu Province
TTG1/87527 UCOMPOSITE 3.0 A
Jiangyin Mingyang Glass Production ; Jiangyin City, Jiangsu
TTG*5777 UCOMPOSITE 3.0 (3) A
TTG5/325778 UCOMP+CAN 4.0 A
TTG3/167598 UCOMPOSITE 5.0 A
TTG1/45779 UCOMP+CAN 6.0 A
TTG5/165780 UCOMP+CAN 8.0 A
TTG3/86203 UCOMPOSITE 10.0 A
TPG5/326478 UCOMPOSITE 4.0 (m) A
TPG3/166479 UCOMPOSITE 5.0 (m) A
TPG1/47870 UCOMP+CAN 6.0 (s) A
TBG1/47258 UCOMPOSITE 6.0 A
Jinzhou Fortune Spring Glass Co., Ltd. ; Jinzhou, Liaoning, China
TTG1/87268 UCOMP+CAN 3.0 A
JM Glass ; Hayward, CATTG3/164928 UCOMPOSITE 5.0 A
TTG1/44929 UCOMPOSITE 6.0 A
TTG3/84930 UCOMPOSITE 10.0 A
TTG1/24931 UCOMPOSITE 12.0 A
JYC Glass Co. Ltd. ; Foshan, Guangdong, ChinaTTG1/83957 UCOMP+CAN 3.0 A
TTG5/323958 UCOMP+CAN 4.0 A
TTG3/163959 UCOMP+CAN 5.0 A
TTG1/43960 UCOMP+CAN 6.0 A
TTG5/163961 UCOMP+CAN 8.0 A
TTG3/83962 UCOMP+CAN 10.0 A
TTG1/23963 UCOMP+CAN 12.0 A
TPG5/324161 UCOMP+CAN 4.0 (s) A
TPG3/166621 UCOMP+CAN 5.0 (s) A
TPG1/46622 UCOMP+CAN 6.0 (s) A
TBP3/166619 UCOMP+CAN 5.0 (s) A
TBP1/46620 UCOMP+CAN 6.0 (s) A
TBG5/323991 UCOMP+CAN 4.0 A
TBG3/163992 UCOMP+CAN 5.0 A
TBG1/43993 UCOMP+CAN 6.0 A
TBG5/163994 UCOMP+CAN 8.0 A
Kensington Glass Arts ; Ijamsville, MDTTG1/45973 UCOMPOSITE 6.0 A
TTG3/85974 UCOMPOSITE 10.0 A
TTG1/25975 UCOMPOSITE 12.0 A
TTG5/85976 UCOMPOSITE 16.0 A
TTG3/45977 UCOMPOSITE 19.0 A
KFK d.o.o. ; Dugo Selo, CroatiaTTG5/168108 UCOMPOSITE 8.0 A
LTG(H)8109 UCOMPOSITE 10 (b)(A) A(.030)Kinestral Technologies ; Miaoli County,Taiwan
LSP(H)8207 UCOMP+CAN 10-16+ (b)(HS) A(.030)x2LSP(H)8208 UCOMP+CAN 12-16+ (b)(HS) A(.030)x3
Kohler Company ; Union City, TNTTG1/81979 UCOMP+CAN 3.0 A
TTG5/321980 UCOMP+CAN 4.0 A
TTG3/161981 UCOMP+CAN 5.0 A
TTG1/41982 UCOMP+CAN 6.0 A
TTG5/164668 UCOMP+CAN 8.0 A
TTG3/82434 UCOMP+CAN 10.0 A
TTG1/24012 UCOMP+CAN 12.0 A
TPG1/81983 UCOMP+CAN 3.0 (m) A
TPG5/323532 UCOMP+CAN 4.0 (m) A
TPG3/161984 UCOMP+CAN 5.0 (s) A
TPG1/42918 UCOMPOSITE 6.0 (m)(IN) A
La Tecnica Nel Vetro SpA ; Scafati, Salerno, ItalyTTG3/167174 UCOMP+CAN 5.0 A
TTG1/47168 UCOMP+CAN 6.0 A
TTG5/167167 UCOMP+CAN 8.0 A
TTG3/87166 UCOMP+CAN 10.0 A
TTG1/27165 UCOMP+CAN 12.0 A
LTG(H)7169 UCOMP+CAN 8-12 (b)(A) A(.015)
Page 52
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Laurier Architectural inc. ; Montreal, QCTTG1/86217 UCOMP+CAN 3.0 A
TTG5/326218 UCOMP+CAN 4.0 A
TTG3/166219 UCOMP+CAN 5.0 A
TTG1/46220 UCOMP+CAN 6.0 A
TTG3/86221 UCOMP+CAN 10.0 A
TTG1/26222 UCOMP+CAN 12.0 A
Laurier Architectural, Inc. ; Laurier-Station, QCTTG5/328121 UCOMP+CAN 4.0 A
TTG3/168122 UCOMP+CAN 5.0 A
TTG1/48123 UCOMP+CAN 6.0 A
TTG3/88124 UCOMP+CAN 10.0 A
TTG1/28125 UCOMP+CAN 12.0 A
LTG(H)8126 UCOMP+CAN 8-12 (b)(A) A(.030)Legacy Glass and Mirror, LLC. ; Irving, TX
TTG3/168053 UCOMPOSITE 5.0 A
TTG1/47600 UCOMPOSITE 6.0 A
TTG3/87601 UCOMPOSITE 10.0 A
TTG1/27602 UCOMPOSITE 12.0 A
Les Verres VMIK Inc. ; Gatineau, QCTTG5/326893 UCOMP+CAN 4.0 A
TTG3/166894 UCOMP+CAN 5.0 A
TTG1/46895 UCOMP+CAN 6.0 A
TTG3/86896 UCOMP+CAN 10.0 A
TTG1/26897 UCOMP+CAN 12.0 A
Liaocheng Chicheng Glass Material Co., Ltd. ; Shandong, China
TBP*7490 10-3/16"X76"
COMP+CAN 7.0 (s)(2)(IN) A
Lien Yeu Cermin (Muar) SDN BHD ; MalaysiaTTG5/327358 UCOMPOSITE 4.0 A
TTG3/167359 UCOMPOSITE 5.0 A
TTG1/47360 UCOMPOSITE 6.0 A
TTG5/167361 UCOMPOSITE 8.0 A
TTG3/87362 UCOMPOSITE 10.0 A
TTG1/28038 UCOMPOSITE 12.0 A
Lippert Components ; Bristol, INTTG1/88061 UCOMPOSITE 3.0 A
TTG1/48062 UCOMPOSITE 6.0 A
LongDing Glass Production Co., Ltd. ; Dongguan, Guangdong
TTG3/168175 UCOMPOSITE 5.0 A
TTG1/48176 UCOMPOSITE 6.0 A
TTG5/168177 UCOMPOSITE 8.0 A
TTG3/88178 UCOMPOSITE 10.0 A
Louisville Plate Glass ; Louisville, KYTTG1/86070 UCOMPOSITE 3.0 A
TTG3/166072 UCOMPOSITE 5.0 A
TTG1/46073 UCOMPOSITE 6.0 A
TTG3/86074 UCOMPOSITE 10.0 A
TTG1/26075 UCOMPOSITE 12.0 A
LTI Smart Glass, Inc. ; Pittsfield, MATTG1/87079 UCOMP+CAN 3.0 A
TTG3/166922 UCOMP+CAN 5.0 A
TTG1/46923 UCOMP+CAN 6.0 A
TTG5/166924 UCOMP+CAN 8.0 A
TTG3/86925 UCOMP+CAN 10.0 A
TTG1/26926 UCOMP+CAN 12.0 A
LTG(H)7286 UCOMP+CAN 10-16+ (b)(A) A(.030)Luoyang LandGlass Technology Co., LTD ; Luoyang, China
VIGT5/167622 UCOMPOSITE 8.0 A
VIGT3/86476 UCOMPOSITE 10.0 A
M Industria S.A. DE C.V. ; ConkalTTG1/87708 UCOMP+CAN 3.0 A
TTG5/327709 UCOMP+CAN 4.0 A
TTG3/167682 UCOMP+CAN 5.0 A
TTG1/47683 UCOMP+CAN 6.0 A
TTG5/167684 UCOMP+CAN 8.0 A
TTG3/87685 UCOMP+CAN 10.0 A
TTG1/27686 UCOMP+CAN 12.0 A
TTG3/47687 UCOMP+CAN 19.0 A
TBG1/48054 UCOMP+CAN 6.0 A
TBG3/88055 UCOMP+CAN 10.0 A
TBG1/28056 UCOMP+CAN 12.0 A
LTG(S)7688 UCOMP+CAN 6 (ip)(A) A(.035)LTG(S)7690 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7689 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)7691 UCOMP+CAN 8-16+ (b)(A) A(.030)
M&M Tempering Inc. ; Loganville, GATTG1/44280 UCOMPOSITE 6.0 A
TTG3/84281 UCOMPOSITE 10.0 A
TTG1/24282 UCOMPOSITE 12.0 A
M3 Glass Technologies ; Irving, TXTTG1/45945 UCOMPOSITE 6.0 A
TTG3/85946 UCOMPOSITE 10.0 A
TTG1/25947 UCOMPOSITE 12.0 A
Manko Window Systems ; Aurora, COTTG1/86275 UCOMPOSITE 3.0 A
TTG5/326276 UCOMPOSITE 4.0 A
TTG3/166277 UCOMPOSITE 5.0 A
TTG1/46278 UCOMPOSITE 6.0 A
TTG3/86279 UCOMPOSITE 10.0 A
TTG1/26280 UCOMPOSITE 12.0 A
Manko Window Systems- KS ; Manhattan, KSTTG5/326826 UCOMPOSITE 4.0 A
TTG3/166827 UCOMPOSITE 5.0 A
TTG1/46828 UCOMPOSITE 6.0 A
TTG3/86829 UCOMPOSITE 10.0 A
TTG1/26830 UCOMPOSITE 12.0 A
TPG1/86833 UCOMPOSITE 3.0 (s) A
TPG3/166834 UCOMPOSITE 5.0 (m) A
TPG1/46835 UCOMPOSITE 6.0 (m) A
TPG3/86836 UCOMPOSITE 10.0 (m) A
Page 53
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Manko Windows ; Des Moines, IATTG1/86286 UCOMPOSITE 3.0 A
TTG5/326287 UCOMPOSITE 4.0 A
TTG3/166288 UCOMPOSITE 5.0 A
TTG1/46289 UCOMPOSITE 6.0 A
TTG3/86290 UCOMPOSITE 10.0 A
TTG1/26291 UCOMPOSITE 12.0 A
TTG5/86432 UCOMPOSITE 16.0 A
TTG3/47004 UCOMPOSITE 19.0 A
TPG1/86292 UCOMPOSITE 3.0 (m) A
TPG5/326293 UCOMPOSITE 4.0 (m) A
TPG3/166294 UCOMPOSITE 5.0 (m) A
TPG1/46295 UCOMPOSITE 6.0 (m) A
TPG3/86296 UCOMPOSITE 10.0 (m) A
Maryland Glass & Mirror ; Baltimore, MDTTG1/84318 UCOMPOSITE 3.0 A
TTG3/164319 UCOMPOSITE 5.0 A
TTG1/44320 UCOMPOSITE 6.0 A
TTG5/168066 UCOMPOSITE 8.0 A
TTG3/84321 UCOMPOSITE 10.0 A
TTG1/24322 UCOMPOSITE 12.0 A
TTG3/47022 UCOMPOSITE 19.0 A
Maxividrio S.De R. L. de C.V. ; CancunLTG(H)8293 UCOMP+CAN 12 (b)(HS) A(.090)
McGrory Glass ; Paulsboro, NJTTG3/164925 UCOMPOSITE 5.0 A
TTG1/44813 UCOMPOSITE 6.0 A
TTG3/84814 UCOMPOSITE 10.0 A
TTG1/24815 UCOMPOSITE 12.0 A
TTG5/84816 UCOMPOSITE 16.0 A
TTG3/44817 UCOMPOSITE 19.0 A
TPG1/44818 UCOMPOSITE 6.0 (m) A
TPG3/84819 UCOMPOSITE 10.0 (s) A
TPG1/24820 UCOMPOSITE 12.0 (s)(IN) A
LTG(S)7287 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)5263 UCOMPOSITE 8-12 (b)(A) A(.030)
Mercer Glass Fab LLC ; Trenton, NJTTG1/47671 UCOMPOSITE 6.0 A
TTG5/164530 UCOMPOSITE 8.0 A
TTG3/84255 UCOMPOSITE 10.0 A
TTG1/24256 UCOMPOSITE 12.0 A
TPG1/44257 UCOMPOSITE 6.0 (m) A
TPG3/84258 UCOMPOSITE 10.0 (m) A
Merck Window Technologies B.V. ; Veldhoven, N.B.LSP(H)7829 UCOMP+CAN 25 (b)(HS) A(.030)x6LSP(H)7830 UCOMP+CAN 32 (b)(HS) A(.030)x4
Mid-American Glass ; Davenport, IATTG1/87227 UCOMPOSITE 3.0 A
TTG5/327228 UCOMPOSITE 4.0 A
TTG3/167229 UCOMPOSITE 5.0 A
TTG1/47230 UCOMPOSITE 6.0 A
TTG3/87231 UCOMPOSITE 10.0 A
TTG1/27232 UCOMPOSITE 12.0 A
Midwest Glass Fabricators Inc. ; Highland, MITTG1/86027 UCOMP+CAN 3.0 A
TTG5/326028 UCOMP+CAN 4.0 A
TTG3/166029 UCOMP+CAN 5.0 A
TTG1/46030 UCOMP+CAN 6.0 A
TTG3/86031 UCOMP+CAN 10.0 A
TTG1/26032 UCOMP+CAN 12.0 A
TTG5/86033 UCOMP+CAN 16.0 A
TTG3/46034 UCOMP+CAN 19.0 A
TPG3/167920 UCOMP+CAN 5.0 (m) A
TPG1/47921 UCOMP+CAN 6.0 (s) A
TPG3/86037 UCOMP+CAN 10.0 (m) A
Milgard Tempering ; Dixon, CATTG1/42842 UCOMPOSITE 6.0 A
Mirror Works Inc. ; Ottawa, OntarioTTG5/328164 UCOMP+CAN 4.0 A
TTG3/168165 UCOMP+CAN 5.0 A
TTG1/48166 UCOMP+CAN 6.0 A
TTG3/88167 UCOMP+CAN 10.0 A
TTG1/28168 UCOMP+CAN 12.0 A
Mr. Glass Tempering, LLC ; Brooklyn, NYTTG3/167170 UCOMP+CAN 5.0 A
TTG1/47171 UCOMP+CAN 6.0 A
TTG3/87172 UCOMP+CAN 10.0 A
TTG1/27173 UCOMP+CAN 12.0 A
Multiver ; Vanier, QCTTG1/82498 UCOMP+CAN 3.0 A
TTG5/322629 UCOMP+CAN 4.0 A
TTG3/166890 UCOMP+CAN 5.0 A
TTG1/42499 UCOMP+CAN 6.0 A
TTG5/165226 UCOMP+CAN 8.0 A
TTG3/85227 UCOMP+CAN 10.0 A
TTG1/25228 UCOMP+CAN 12.0 A
Multiver Ltee ; Saint-Leonard (Quebec), CanadaTTG5/326977 UCOMP+CAN 4.0 A
TTG3/166978 UCOMP+CAN 5.0 A
TTG1/46979 UCOMP+CAN 6.0 A
TTG3/86980 UCOMP+CAN 10.0 A
LTG(S)7546 UCOMP+CAN 6 (b)(A) A(.015)LTG(H)7548 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)7547 UCOMP+CAN 10-16+ (b)(A) A(.015)
Nashville Tempered Glass Corp. ; Nashville, TNTTG1/81416 UCOMP+CAN 3.0 A
TTG5/322497 UCOMP+CAN 4.0 A
TTG3/161467 UCOMP+CAN 5.0 A
TTG1/41417 UCOMP+CAN 6.0 A
TTG5/165729 UCOMP+CAN 8.0 A
TTG3/82494 UCOMP+CAN 10.0 A
Page 54
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Nashville Tempered Glass LLC ; Hendersonville, TNTTG5/322691 UCOMP+CAN 4.0 A
TTG3/162692 UCOMP+CAN 5.0 A
TTG1/42693 UCOMP+CAN 6.0 A
TTG5/167980 UCOMP+CAN 8.0 A
TTG3/82694 UCOMP+CAN 10.0 A
TTG1/24148 UCOMP+CAN 12.0 A
TTG3/45454 UCOMP+CAN 19.0 A
LTG(S)5229 UCOMP+CAN 5-6 (b)(A) B(.015)LTG(H)5231 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)5230 UCOMP+CAN 8-16+ (b)(A) A(.015)
New Angle Beveling ; Clearfield, PATTG1/85772 UCOMPOSITE 3.0 A
TTG3/165774 UCOMPOSITE 5.0 A
TTG1/45773 UCOMPOSITE 6.0 A
TTG3/85775 UCOMPOSITE 10.0 A
TTG1/25776 UCOMPOSITE 12.0 A
New Angle Beveling ; Hyde, PATTG1/84593 UCOMPOSITE 3.0 A
TTG3/164594 UCOMPOSITE 5.0 A
TTG1/44595 UCOMPOSITE 6.0 A
TTG3/84591 UCOMPOSITE 10.0 A
TTG1/24592 UCOMPOSITE 12.0 A
New Century Glass & Aluminum LLC ; Woodside, NYTTG3/165455 UCOMPOSITE 5.0 A
TTG1/45456 UCOMPOSITE 6.0 A
TTG3/85457 UCOMPOSITE 10.0 A
TTG1/25458 UCOMPOSITE 12.0 A
Ningbo Xinxin Glass Technology Co., Ltd ; Ningbo, ChinaTTG5/326271 UCOMPOSITE 4.0 A
TTG1/46272 UCOMPOSITE 6.0 A
TTG3/87873 UCOMPOSITE 10.0 A
TPG5/326273 UCOMPOSITE 4.0 (m) A
TPG1/46274 UCOMPOSITE 6.0 (s) A
TPG3/86845 UCOMPOSITE 10.0 (s) A
Niskayuna Glass ; Schenectady, NYTTG1/87471 UCOMP+CAN 3.0 A
TTG3/167472 UCOMP+CAN 5.0 A
TTG1/47473 UCOMP+CAN 6.0 A
Norfinch Glass & Mirror Mfg. Ltd. ; Etobicoke, OntarioTTG1/48252 UCOMP+CAN 6.0 A
TTG3/88253 UCOMP+CAN 10.0 A
TTG1/28254 UCOMP+CAN 12.0 A
Northeast Building Products ; Philadelphia, PATTG1/87281 UCOMPOSITE 3.0 A
TTG5/327282 UCOMPOSITE 4.0 (IN) A
TTG3/167283 UCOMPOSITE 5.0 A
TPG1/88084 UCOMPOSITE 3.0 (s) A
Northwestern Glass Fab ; Fridley, MNTTG1/86733 UCOMP+CAN 3.0 A
TTG3/166734 UCOMP+CAN 5.0 A
TTG1/46735 UCOMP+CAN 6.0 A
TTG3/86736 UCOMP+CAN 10.0 A
TTG1/26737 UCOMP+CAN 12.0 A
Northwestern Industries - Arizona, Inc. ; Yuma, AZTTG3/166566 UCOMPOSITE 5.0 A
TTG1/46567 UCOMPOSITE 6.0 A
TTG5/166568 UCOMPOSITE 8.0 A
TTG3/86569 UCOMPOSITE 10.0 A
Novatech Canada Inc. ; St-Agapit, Quebec, CanadaTTG1/87006 UCOMP+CAN 3.0 A
TTG5/327007 UCOMP+CAN 4.0 A
TTG3/167008 UCOMP+CAN 5.0 A
TTG1/47009 UCOMP+CAN 6.0 A
Novavetro S.r.l. ; San Severino Marche, ItalyTTG3/167768 UCOMP+CAN 5.0 A
TTG1/47769 UCOMP+CAN 6.0 A
TTG5/167770 UCOMP+CAN 8.0 A
TTG3/87771 UCOMP+CAN 10.0 A
TTG1/27772 UCOMP+CAN 12.0 A
TTG*7773 UCOMP+CAN 15.0 (4) A
LTG(S)7774 UCOMP+CAN 6 (b)(A) A(.015)LTG(H)7775 UCOMP+CAN 8-12 (b)(A) A(.015)LTG(H)7776 UCOMP+CAN 16+ (b)(A) A(.030)
NY Tempering LLC ; Maspeth, NYTTG3/164900 UCOMPOSITE 5.0 A
TTG1/44901 UCOMPOSITE 6.0 A
TTG3/84902 UCOMPOSITE 10.0 A
TTG1/24903 UCOMPOSITE 12.0 A
Oldcastle BuildingEnvelope® ; Albertville, MNTTG1/83104 UCOMP+CAN 3.0 A
TTG5/323105 UCOMP+CAN 4.0 A
TTG3/163106 UCOMP+CAN 5.0 A
TTG1/43107 UCOMP+CAN 6.0 A
TTG5/164882 UCOMP+CAN 8.0 A
TTG3/83108 UCOMP+CAN 10.0 A
TTG1/23109 UCOMP+CAN 12.0 A
TTG5/83110 UCOMP+CAN 16.0 A
TTG3/43111 UCOMP+CAN 19.0 A
TPG3/83127 UCOMP+CAN 10.0 (m) A
LTG(S)8081 UCOMPOSITE 6 (A)(b) A(.030)LTG(H)8083 UCOMPOSITE 8-16+ (ip)(A) A(.060)LTG(H)8082 UCOMPOSITE 8-16+ (b)(A) A(.030)
Oldcastle BuildingEnvelope® ; Calgary, ABTTG1/83263 UCOMP+CAN 3.0 A
TTG5/323264 UCOMP+CAN 4.0 A
TTG3/163265 UCOMP+CAN 5.0 A
TTG1/43266 UCOMP+CAN 6.0 A
TTG5/163267 UCOMP+CAN 8.0 A
TTG3/83268 UCOMP+CAN 10.0 A
TTG1/23269 UCOMP+CAN 12.0 A
TTG5/83270 UCOMP+CAN 16.0 A
TTG3/43271 UCOMP+CAN 19.0 A
TPG5/323273 UCOMP+CAN 4.0 (d) A
TPG3/163274 UCOMP+CAN 5.0 (d) A
TPG1/43275 UCOMP+CAN 6.0 (m) A
TPG3/83262 UCOMP+CAN 10.0 (d) A
Page 55
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Oldcastle BuildingEnvelope® ; Concord, ONTTG1/83439 UCOMP+CAN 3.0 A
TTG5/323440 UCOMP+CAN 4.0 A
TTG3/163441 UCOMP+CAN 5.0 A
TTG1/43442 UCOMP+CAN 6.0 A
TTG5/163443 UCOMP+CAN 8.0 A
TTG3/83444 UCOMP+CAN 10.0 A
TTG1/23445 UCOMP+CAN 12.0 A
TTG5/83446 UCOMP+CAN 16.0 A
TTG3/43447 UCOMP+CAN 19.0 A
TPG3/164424 UCOMP+CAN 5.0 (s) A
TPG3/83448 UCOMP+CAN 10.0 (s) A
Oldcastle BuildingEnvelope® ; Covington, GATTG1/83329 UCOMP+CAN 3.0 A
TTG5/323330 UCOMP+CAN 4.0 A
TTG3/163331 UCOMP+CAN 5.0 A
TTG1/43332 UCOMP+CAN 6.0 A
TTG3/83333 UCOMP+CAN 10.0 A
TTG1/23334 UCOMP+CAN 12.0 A
TTG5/84390 UCOMP+CAN 16.0 A
TTG3/43335 UCOMP+CAN 19.0 A
LTG(S)6697 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4393 UCOMP+CAN 10-12 (ip)(A) A(.035)LTG(H)4392 UCOMP+CAN 10-16+ (b)(A) A(.030)
Oldcastle BuildingEnvelope® ; Denver, COTTG1/83310 UCOMP+CAN 3.0 A
TTG5/323311 UCOMP+CAN 4.0 A
TTG3/163312 UCOMP+CAN 5.0 A
TTG1/43313 UCOMP+CAN 6.0 A
TTG3/83314 UCOMP+CAN 10.0 A
TTG1/23315 UCOMP+CAN 12.0 A
TPG1/83317 UCOMP+CAN 3.0 (s) A
TPG5/323318 UCOMP+CAN 4.0 (d) A
TPG3/163319 UCOMP+CAN 5.0 (m) A
TPG1/43320 UCOMP+CAN 6.0 (m) A
TPG3/83321 UCOMP+CAN 10.0 (m) A
LTG(S)4533 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4454 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)6056 UCOMP+CAN 12-16+ (ip)(A) A(.060)
Oldcastle BuildingEnvelope® ; Fremont, CATTG1/83191 UCOMP+CAN 3.0 A
TTG5/323192 UCOMP+CAN 4.0 A
TTG3/163193 UCOMP+CAN 5.0 A
TTG1/43194 UCOMP+CAN 6.0 A
TTG5/165387 UCOMP+CAN 8.0 A
TTG3/83195 UCOMP+CAN 10.0 A
TTG1/23196 UCOMP+CAN 12.0 A
TTG5/84458 UCOMP+CAN 16.0 A
TTG3/43197 UCOMP+CAN 19.0 A
TPG1/83199 UCOMP+CAN 3.0 (s) A
TPG5/323200 UCOMP+CAN 4.0 (d) A
TPG3/163201 UCOMP+CAN 5.0 (m) A
TPG1/43907 UCOMP+CAN 6.0 (m) A
TPG3/83203 UCOMP+CAN 10.0 (m) A
LTG(S)7879 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4460 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4461 UCOMP+CAN 8-16+ (ip)(A) A(.060)
Oldcastle BuildingEnvelope® ; Grand Prairie, TXTTG1/83250 UCOMP+CAN 3.0 A
TTG3/163252 UCOMP+CAN 5.0 A
TTG1/43253 UCOMP+CAN 6.0 A
TTG3/83255 UCOMP+CAN 10.0 A
TTG1/23256 UCOMP+CAN 12.0 A
TTG5/87039 UCOMP+CAN 16.0 A
TPG1/83425 UCOMP+CAN 3.0 (s) A
TPG5/323426 UCOMP+CAN 4.0 (m)(IN) A
TPG3/163427 UCOMP+CAN 5.0 (s) A
TPG3/83428 UCOMP+CAN 10.0 (s) A
LTG(S)7099 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7109 UCOMP+CAN 8-16+ (ip)(A) A(.060)
Oldcastle BuildingEnvelope® ; Hauppauge, NYTTG1/81546 UCOMP+CAN 3.0 A
TTG3/161547 UCOMP+CAN 5.0 A
TTG1/41548 UCOMP+CAN 6.0 A
TTG5/164180 UCOMP+CAN 8.0 A
TTG3/81549 UCOMP+CAN 10.0 A
TTG1/21550 UCOMP+CAN 12.0 A
LTG(S)3392 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4618 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)5355 UCOMP+CAN 10-16+ (ip)(A) A(.060)
Oldcastle BuildingEnvelope® ; Indianapolis, INTTG1/82210 UCOMP+CAN 3.0 A
TTG5/322216 UCOMP+CAN 4.0 A
TTG3/162211 UCOMP+CAN 5.0 A
TTG1/42212 UCOMP+CAN 6.0 A
TTG3/82213 UCOMP+CAN 10.0 A
TTG1/22214 UCOMP+CAN 12.0 A
TTG5/87250 UCOMP+CAN 16.0 A
TPG1/84384 UCOMP+CAN 3.0 (m) A
TPG3/162215 UCOMP+CAN 5.0 (m) A
TPG1/45442 UCOMP+CAN 6.0 (m) A
TPG3/83259 UCOMP+CAN 10.0 (m) A
Oldcastle BuildingEnvelope® ; Langley, BCTTG1/83286 UCOMP+CAN 3.0 A
TTG5/323287 UCOMP+CAN 4.0 A
TTG3/163288 UCOMP+CAN 5.0 A
TTG1/43289 UCOMP+CAN 6.0 A
TTG5/163290 UCOMP+CAN 8.0 A
TTG3/83291 UCOMP+CAN 10.0 A
TTG1/23292 UCOMP+CAN 12.0 A
TTG5/83293 UCOMP+CAN 16.0 A
TTG3/43294 UCOMP+CAN 19.0 A
TPG1/83295 UCOMP+CAN 3.0 (m) A
TPG5/323296 UCOMP+CAN 4.0 (d) A
TPG3/163297 UCOMP+CAN 5.0 (d) A
TPG3/84710 UCOMP+CAN 10.0 (s) A
LTG(S)4475 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4476 UCOMP+CAN 8-16+ (b)(A) A(.030)
Page 56
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Oldcastle BuildingEnvelope® ; Los Angeles, CATTG1/81608 UCOMP+CAN 3.0 A
TTG5/321609 UCOMP+CAN 4.0 A
TTG3/16630 UCOMP+CAN 5.0 A
TTG1/4514 UCOMP+CAN 6.0 A
TTG5/164400 UCOMP+CAN 8.0 A
TTG3/8515 UCOMP+CAN 10.0 A
TTG1/2516 UCOMP+CAN 12.0 A
TTG5/84387 UCOMP+CAN 16.0 A
TTG3/42074 UCOMP+CAN 19.0 A
TPG3/16935 UCOMP+CAN 5.0 (m) A
TPG3/83793 UCOMP+CAN 10.0 (m) A
LTG(S)7406 UCOMP+CAN 6 (ip)(A) A(.035)LTG(S)4346 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7407 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)4563 UCOMP+CAN 8-16+ (b)(A) A(.030)
Oldcastle BuildingEnvelope® ; Miami, FLTTG1/87845 UCOMP+CAN 3.0 A
TTG5/327847 UCOMP+CAN 4.0 A
TTG3/163497 UCOMP+CAN 5.0 A
TTG1/43498 UCOMP+CAN 6.0 A
TTG5/167848 UCOMP+CAN 8.0 A
TTG3/83499 UCOMP+CAN 10.0 A
TTG1/23500 UCOMP+CAN 12.0 A
TTG5/87849 UCOMP+CAN 16.0 A
TTG3/47850 UCOMP+CAN 19.0 A
TPG1/87846 UCOMP+CAN 3.0 (m) A
TPG3/163502 UCOMP+CAN 5.0 (m) A
TPG1/44477 UCOMP+CAN 6.0 (d) A
TPG3/83503 UCOMP+CAN 10.0 (s) A
LTG(S)7872 UCOMP+CAN 6 (ip)(A) A(.035)LTG(S)7877 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4399 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)4398 UCOMP+CAN 8-16+ (b)(A) A(.030)
Oldcastle BuildingEnvelope® ; Moorestown, NJTTG1/83180 UCOMP+CAN 3.0 A
TTG5/323181 UCOMP+CAN 4.0 A
TTG3/163182 UCOMP+CAN 5.0 A
TTG1/43183 UCOMP+CAN 6.0 A
TTG3/83184 UCOMP+CAN 10.0 A
TTG1/23185 UCOMP+CAN 12.0 A
TTG5/84054 UCOMP+CAN 16.0 A
TPG1/83186 UCOMP+CAN 3.0 (s) A
TPG5/323187 UCOMP+CAN 4.0 (d) A
TPG3/163188 UCOMP+CAN 5.0 (m) A
TPG1/43189 UCOMP+CAN 6.0 (m) A
TPG3/83190 UCOMP+CAN 10.0 (s) A
Oldcastle BuildingEnvelope® ; Perrysburg, OHTTG1/83233 UCOMP+CAN 3.0 A
TTG5/323234 UCOMP+CAN 4.0 A
TTG3/163235 UCOMP+CAN 5.0 A
TTG1/43236 UCOMP+CAN 6.0 A
TTG5/164443 UCOMP+CAN 8.0 A
TTG3/83237 UCOMP+CAN 10.0 A
TTG1/23238 UCOMP+CAN 12.0 A
TTG5/83239 UCOMP+CAN 16.0 A
TTG3/43240 UCOMP+CAN 19.0 A
TPG3/163243 UCOMP+CAN 5.0 (s) A
TPG1/43244 UCOMP+CAN 6.0 (m) A
LTG(S)4700 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4446 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4444 UCOMP+CAN 8-16+ (ip)(A) A(.060)
Oldcastle BuildingEnvelope® ; Phoenix, AZTTG1/83128 UCOMP+CAN 3.0 A
TTG3/163130 UCOMP+CAN 5.0 A
TTG1/43131 UCOMP+CAN 6.0 A
TTG3/83132 UCOMP+CAN 10.0 A
TTG1/23133 UCOMP+CAN 12.0 A
TTG5/87262 UCOMP+CAN 16.0 A
TTG3/46394 UCOMP+CAN 19.0 A
TPG1/87521 UCOMP+CAN 3.0 (s) A
TPG3/163136 UCOMP+CAN 5.0 (m) A
TPG1/43999 UCOMP+CAN 6.0 (m) A
TPG3/83729 UCOMP+CAN 10.0 (m) A
Oldcastle BuildingEnvelope® ; Rock Hill, SCTTG1/83276 UCOMP+CAN 3.0 (IN) A
TTG5/323462 UCOMP+CAN 4.0 A
TTG3/163277 UCOMP+CAN 5.0 A
TTG1/43278 UCOMP+CAN 6.0 A
TTG5/164787 UCOMP+CAN 8.0 (IN) A
TTG3/83279 UCOMP+CAN 10.0 A
TTG1/23280 UCOMP+CAN 12.0 A
TPG1/83281 UCOMP+CAN 3.0 (s)(IN) A
TPG5/324396 UCOMP+CAN 4.0 (d) A
TPG3/163283 UCOMP+CAN 5.0 (d) A
TPG3/83285 UCOMP+CAN 10.0 (d) A
Oldcastle BuildingEnvelope® ; Schofield, WITTG1/83167 UCOMP+CAN 3.0 A
TTG5/323168 UCOMP+CAN 4.0 A
TTG3/163169 UCOMP+CAN 5.0 A
TTG1/43170 UCOMP+CAN 6.0 A
TTG5/163171 UCOMP+CAN 8.0 A
TTG3/83172 UCOMP+CAN 10.0 A
TTG1/23173 UCOMP+CAN 12.0 A
TPG5/323177 UCOMP+CAN 4.0 (s) A
TPG3/163178 UCOMP+CAN 5.0 (d) A
LTG(S)3176 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)6773 UCOMP+CAN 8-16+ (ip)(A) A(.060)LTG(H)4558 UCOMP+CAN 8-16+ (b)(A) A(.030)
Page 57
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Oldcastle BuildingEnvelope® ; Shawnee, OKTTG1/83095 UCOMP+CAN 3.0 A
TTG5/323096 UCOMP+CAN 4.0 A
TTG3/163097 UCOMP+CAN 5.0 A
TTG1/43098 UCOMP+CAN 6.0 A
TTG3/83099 UCOMP+CAN 10.0 A
TTG1/23100 UCOMP+CAN 12.0 A
TTG3/47603 UCOMP+CAN 19.0 A
TPG1/83101 UCOMP+CAN 3.0 (m) A
TPG5/323102 UCOMP+CAN 4.0 (m) A
TPG3/163103 UCOMP+CAN 5.0 (m) A
Oldcastle BuildingEnvelope® ; Tampa, FLTTG1/83116 UCOMP+CAN 3.0 A
TTG3/163118 UCOMP+CAN 5.0 A
TTG1/43119 UCOMP+CAN 6.0 A
TTG3/83120 UCOMP+CAN 10.0 A
TTG1/23121 UCOMP+CAN 12.0 A
TPG1/83122 UCOMP+CAN 3.0 (s) A
TPG3/163124 UCOMP+CAN 5.0 (m) A
TPG1/43125 UCOMP+CAN 6.0 (m) A
TPG3/84340 UCOMP+CAN 10.0 (s) A
LTG(S)4448 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4449 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)5051 UCOMP+CAN 12 (ip)(A) A(.035)
Oldcastle BuildingEnvelope® ; Vancouver, WATTG1/83219 UCOMP+CAN 3.0 A
TTG5/323220 UCOMP+CAN 4.0 A
TTG3/163221 UCOMP+CAN 5.0 A
TTG1/43222 UCOMP+CAN 6.0 A
TTG5/163223 UCOMP+CAN 8.0 A
TTG3/83224 UCOMP+CAN 10.0 A
TTG1/23225 UCOMP+CAN 12.0 A
TPG1/83226 UCOMP+CAN 3.0 (s) A
TPG5/327424 UCOMP+CAN 4.0 (s) A
TPG3/163228 UCOMP+CAN 5.0 (m) A
TPG1/43229 UCOMP+CAN 6.0 (m) A
TPG3/83230 UCOMP+CAN 10.0 (m) A
Oldcastle BuildingEnvelope® ; Warrenton, MOTTG1/83144 UCOMP+CAN 3.0 A
TTG5/323145 UCOMP+CAN 4.0 A
TTG3/163146 UCOMP+CAN 5.0 A
TTG1/43147 UCOMP+CAN 6.0 A
TTG5/163796 UCOMP+CAN 8.0 A
TTG3/83148 UCOMP+CAN 10.0 A
TTG1/23149 UCOMP+CAN 12.0 A
TTG5/85904 UCOMP+CAN 16.0 A
TPG1/83151 uCOMP+CAN 3.0 (s) A
TPG5/323152 UCOMP+CAN 4.0 (s) A
TPG3/163153 UCOMP+CAN 5.0 (m) A
TPG1/43154 UCOMP+CAN 6.0 (m) A
TPG3/83155 UCOMP+CAN 10.0 (d) A
Oldcastle BuildingEnvelope® ; Wright City, MOTTG1/83137 UCOMP+CAN 3.0 A
TTG5/323138 UCOMP+CAN 4.0 A
TTG3/163139 UCOMP+CAN 5.0 A
TTG1/43140 UCOMP+CAN 6.0 A
TTG5/163141 UCOMP+CAN 8.0 A
TTG3/83142 UCOMP+CAN 10.0 A
TTG1/23143 UCOMP+CAN 12.0 A
LTG(S)4528 UCOMP+CAN 6 (ip)(A) A(.035)LTG(S)4526 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4529 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)4527 UCOMP+CAN 8-16+ (b)(A) A(.030)
Oldcastle BuildingEnvelope® Canada Inc. ; Pointe-aux-Trembles, QC
TTG5/324247 UCOMP+CAN 4.0 A
TTG3/161997 UCOMP+CAN 5.0 A
TTG1/42543 UCOMP+CAN 6.0 A
TTG5/162884 UCOMP+CAN 8.0 A
TTG3/82544 UCOMP+CAN 10.0 A
TTG1/22062 UCOMP+CAN 12.0 A
TTG5/87397 UCOMP+CAN 16.0 A
TTG3/47398 UCOMP+CAN 19.0 A
LTG(S)5024 UCOMP+CAN 6 (b)(A)(IN) B(.015)(C1)LTG(S)5025 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4435 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4433 UCOMP+CAN 10-16+ (ip)(A) A(.070)
Oldcastle BuildingEnvelope® Houston Southerland ; Houston, TX
TTG5/327909 UCOMPOSITE 4.0 A
TTG3/167910 UCOMPOSITE 5.0 A
TTG1/46728 UCOMPOSITE 6.0 A
TTG5/167911 UCOMPOSITE 8.0 A
TTG3/86729 UCOMPOSITE 10.0 A
TTG1/26730 UCOMPOSITE 12.0 A
TTG5/87912 UCOMPOSITE 16.0 A
TTG3/47913 UCOMPOSITE 19.0 A
TPG3/167914 UCOMPOSITE 5.0 (s) A
TPG3/87915 UCOMPOSITE 10.0 (s) A
LTG(S)7908 UCOMPOSITE 6 (b)(A) A(.030)LTG(S)7962 UCOMPOSITE 6 (ip)(A) A(.035)LTG(H)6731 UCOMPOSITE 8-16+ (ip)(A) A(.035)LTG(H)6732 UCOMPOSITE 8-16+ (b)(A) A(.030)
Onyx Solar Energy, S.L. ; Avila, SpainLTG(H)7071 UCOMPOSITE 12 (ev)(HS) A(.080)LTG(H)8184 UCOMPOSITE 16+ (ev)(HS) A(.075)LSP(H)7070 UCOMPOSITE 16 (ip)(HS) A(.035)x2
PAN- DUR Glass GmbH ; Ilmenau, ThuringenTTG5/326738 UCOMPOSITE 4.0 A
TTG1/46739 UCOMPOSITE 6.0 A
Panoramic Doors LLC ; Fort Worth, TXTTG5/328198 UCOMP+CAN 4.0 A
Page 58
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Paragon Tempered Glass ; Antwerp, OHTTG1/82684 UCOMPOSITE 3.0 A
TTG5/322685 UCOMPOSITE 4.0 A
TTG3/162686 UCOMPOSITE 5.0 A
TTG1/42687 UCOMPOSITE 6.0 A
TTG3/82688 UCOMPOSITE 10.0 A
TBG3/165242 UCOMPOSITE 5.0 A
TBG1/44811 UCOMPOSITE 6.0 A
Patio Enclosures ; Macedonia, OHTTG1/87843 UCOMPOSITE 3.0 A
TTG5/328222 UCOMPOSITE 4.0 A
Patriot Armored Systems, LLC ; Lee, MATTG1/86688 UCOMPOSITE 3.0 A
TTG3/166689 UCOMPOSITE 5.0 A
TTG1/46690 UCOMPOSITE 6.0 A
TTG3/86691 UCOMPOSITE 10.0 A
Pennsylvania Insulating Glass ; Lewistown, PALTG(S)3918 UCOMPOSITE 6 (b)(A) A(.030)
Perficom S.A. DE C.V. ; San Juan Del Rio, Queretaro, Mexico
TTG1/84512 UCOMPOSITE 3.0 A
PFG Glass ; Langley, BCTTG1/83538 UCOMP+CAN 3.0 A
TTG5/323539 UCOMP+CAN 4.0 A
TTG3/163540 UCOMP+CAN 5.0 A
TTG5/163542 UCOMP+CAN 8.0 A
TTG3/83543 UCOMP+CAN 10.0 A
TTG1/23544 UCOMP+CAN 12.0 A
TPG1/83547 UCOMP+CAN 3.0 (s) A
TPG5/323548 UCOMP+CAN 4.0 (d) A
TPG3/163549 UCOMP+CAN 5.0 (s) A
TPG1/43711 UCOMP+CAN 6.0 (m) A
PGT Industries ; North Venice, FLTTG1/82389 UCOMPOSITE 3.0 A
TTG3/162390 UCOMPOSITE 5.0 A
TTG1/42391 UCOMPOSITE 6.0 A
TPG1/83880 UCOMPOSITE 3.0 (s) A
TPG3/163881 UCOMPOSITE 5.0 (s) A
LTG(S)7451 UCOMPOSITE 6 (ip)(A) A(.035)LTG(H)7452 UCOMPOSITE 8-12 (ip)(A) A(.035)LTG(H)2426 UCOMPOSITE 8-12 (b)(A) A(.060)
Philly Glass Industry Inc. ; Philadelphia, PATTG3/167652 UCOMP+CAN 5.0 A
TTG1/47653 UCOMP+CAN 6.0 A
TTG3/87654 UCOMP+CAN 10.0 A
TTG1/27655 UCOMP+CAN 12.0 A
TTG5/87656 UCOMP+CAN 16.0 (IN) A
TTG3/47657 UCOMP+CAN 19.0 (IN) A
Pietta Glass Working Srl ; Valenii De Munte, RomaniaTTG5/327190 UCOMP+CAN 4.0 A
TTG3/167191 UCOMP+CAN 5.0 A
TTG1/47384 UCOMP+CAN 6.0 A
TTG5/167385 UCOMP+CAN 8.0 A
TTG3/87386 UCOMP+CAN 10.0 A
TTG1/27387 UCOMP+CAN 12.0 A
LTG(H)7389 UCOMP+CAN 8,12-16+ (b)(A) A(.030)LTG(H)8064 UCOMP+CAN 12 (ip)(A) A(.060)LTG(H)7388 UCOMP+CAN 16+ (ip)(A) A(.035)
Pilkington Architectural ; St. Helens, Merseyside, EnglandTTG1/47132 UCOMP+CAN 6.0 A
TTG5/167133 UCOMP+CAN 8.0 A
TTG3/87134 UCOMP+CAN 10.0 A
TTG1/27135 UCOMP+CAN 12.0 A
TTG*7136 UCOMP+CAN 15.0 (4) A
TTG3/47137 UCOMP+CAN 19.0 A
Pilkington Plyglass ; Somercotes, Derby, United KingdomLTG(H)7409 UCOMP+CAN 12-16+ (ip)(HS) A(.060)LTG(H)7408 UCOMP+CAN 12-16+ (b)(HS) A(.060)
Pingdingshan Youbo Glass Technology Co., Ltd. ; Pingdingshan, Henan
TTG3/168100 UCOMPOSITE 5.0 A
LTG(H)8101 UCOMPOSITE 10 (ip)(A) A(.035)Pirnar-Staklo d.o.o. ; Bosanski, Bosnia
TTG1/47704 UCOMP+CAN 6.0 A
Portland Glass Manufacturing ; Clackamas, ORTTG1/46372 UCOMPOSITE 6.0 A
TTG3/86373 UCOMPOSITE 10.0 A
TTG1/26510 UCOMPOSITE 12.0 A
Precision Glass Bending Corporation ; Greenwood, ARTBG1/47149 UCOMP+CAN 6.0 A
TBG3/87150 UCOMP+CAN 10.0 A
TBG1/27151 UCOMP+CAN 12.0 A
TBG5/87152 UCOMP+CAN 16.0 A
TBG3/47153 UCOMP+CAN 19.0 A
LTG(S)7154 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)7422 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)7423 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)7155 UCOMP+CAN 8-16+ (b)(A) A(.030)
Precision Glass Industries ; Houston, TXTTG3/166886 UCOMPOSITE 5.0 A
TTG1/46887 UCOMPOSITE 6.0 A
TTG3/86888 UCOMPOSITE 10.0 A
TTG1/26889 UCOMPOSITE 12.0 A
TPG3/167604 UCOMPOSITE 5.0 (m) A
TPG3/87605 UCOMPOSITE 10.0 (s) A
Page 59
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Prelco Inc. ; Riviere-du-loup, QCTTG1/82034 UCOMP+CAN 3.0 A
TTG5/322035 UCOMP+CAN 4.0 A
TTG3/162713 UCOMP+CAN 5.0 A
TTG1/47800 UCOMP+CAN 6.0 A
TTG5/162751 UCOMP+CAN 8.0 A
TTG3/82381 UCOMP+CAN 10.0 A
TTG1/22048 UCOMP+CAN 12.0 A
TTG5/85609 UCOMP+CAN 16.0 A
TTG3/44904 UCOMP+CAN 19.0 A
LTG(S)4905 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4906 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)8274 UCOMP+CAN 10 (ip)(A) A(.060)
Prelco Inc. ; Saint-Jacques, NBTTG1/84911 UCOMP+CAN 3.0 A
TTG5/324912 UCOMP+CAN 4.0 A
TTG3/164913 UCOMP+CAN 5.0 A
TTG1/44914 UCOMP+CAN 6.0 A
TTG5/164915 UCOMP+CAN 8.0 A
TTG3/84916 UCOMP+CAN 10.0 A
TTG1/24917 UCOMP+CAN 12.0 A
TTG5/85610 UCOMP+CAN 16.0 A
TTG3/45611 UCOMP+CAN 19.0 A
Prelco MTL Inc. ; Montreal, QCTTG5/327481 UCOMP+CAN 4.0 A
TTG3/167482 UCOMP+CAN 5.0 A
TTG1/47483 UCOMP+CAN 6.0 A
TTG5/167484 UCOMP+CAN 8.0 A
TTG3/87485 UCOMP+CAN 10.0 A
Premier Glass Products ; Atlanta, GATTG1/46792 UCOMP+CAN 6.0 A
TTG3/86793 UCOMP+CAN 10.0 A
TTG1/26794 UCOMP+CAN 12.0 A
TBG1/47059 34x5COMP+CAN 6.0 A
TBG3/87060 34x5COMP+CAN 10.0 A
TBG1/27061 34x5COMP+CAN 12.0 A
Press Glass Inc. ; Ridgeway, VATTG3/167810 UCOMP+CAN 5.0 A
TTG1/47811 UCOMP+CAN 6.0 A
TTG5/167812 UCOMP+CAN 8.0 A
TTG3/87813 UCOMP+CAN 10.0 A
TTG1/27814 UCOMP+CAN 12.0 A
TTG5/87815 UCOMP+CAN 16.0 A
TTG3/47816 UCOMP+CAN 19.0 A
LTG(H)7819 UCOMP+CAN 8, 16+ (b)(A) A(.030)LTG(H)7820 UCOMP+CAN 8, 16+ (ip)(A) A(.035)
PRESS GLASS SA ; Radomsko, PolandTTG5/325845 UCOMP+CAN 4.0 A
TTG3/166963 UCOMP+CAN 5.0 A
TTG1/45846 UCOMP+CAN 6.0 A
TTG5/165847 UCOMP+CAN 8.0 A
TTG3/85848 UCOMP+CAN 10.0 A
TTG1/25849 UCOMP+CAN 12.0 A
TTG*5850 UCOMP+CAN 15.0 (4) A
LTG(H)5851 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7479 UCOMP+CAN 12,16+ (ip)(A) A(.035)
PRESS GLASS SA ; Tychy, PolandTTG5/325852 UCOMP+CAN 4.0 A
TTG3/166404 UCOMP+CAN 5.0 A
TTG1/45853 UCOMP+CAN 6.0 A
TTG5/165854 UCOMP+CAN 8.0 A
TTG3/85855 UCOMP+CAN 10.0 A
TTG1/25856 UCOMP+CAN 12.0 A
TTG*5857 UCOMP+CAN 15.0 (4) A
TBG3/167509 UCOMP+CAN 5.0 A
TBG1/47510 UCOMP+CAN 6.0 A
TBG5/167511 UCOMP+CAN 8.0 A
TBG3/87512 UCOMP+CAN 10.0 A
TBG*7513 UCOMP+CAN 12.0 (2) A
TBG*7514 UCOMP+CAN 15.0 (2) A
LTG(H)5858 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7638 UCOMP+CAN 12-16+ (ip)(A) A(.035)
Press Glass, Inc. ; Stoneville, NCTTG1/82728 UCOMP+CAN 3.0 A
TTG3/162730 UCOMP+CAN 5.0 A
TTG1/42732 UCOMP+CAN 6.0 A
TTG5/165259 UCOMP+CAN 8.0 A
TTG3/82729 UCOMP+CAN 10.0 A
TTG1/22733 UCOMP+CAN 12.0 A
TTG5/82731 UCOMP+CAN 16.0 A
TTG3/42734 UCOMP+CAN 19.0 A
LTG(S)4375 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)4413 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)4376 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4414 UCOMP+CAN 8-16+ (ip)(A) A(.035)
PRL Glass Systems ; City of Industry, CATTG1/46508 UCOMPOSITE 6.0 A
LTG(H)7971 UCOMP+CAN 12 (ev)(A)(IN) A(.030)Procesadora De Jalisco S.A. DE C.V. - Queretaro ; San Juan del Rio, Queretaro
TTG1/86716 UCOMPOSITE 3.0 A
TTG1/46717 UCOMPOSITE 6.0 A
Procesadora de Jalisco, S.A. DE C.V. ; Zapopan, MexicoTTG1/46718 UCOMPOSITE 6.0 A
TTG3/86719 UCOMPOSITE 10.0 A
TTG1/26720 UCOMPOSITE 12.0 A
LTG(H)6722 UCOMPOSITE 12 (b)(T) A(.060)LTG(H)6721 UCOMPOSITE 12 (ip)(T) A(.060)
Productora y Distribuidora de Espejos S.A. de C.V. ; Pesqueria, Nuevo Leon
TTG1/46517 UCOMPOSITE 6.0 A
TTG3/86518 UCOMPOSITE 10.0 A
Productos De Valor Agregado en Cristal S.A. de C.V. ; San Juan Ixhuatepec, Tlalnepantla, Mexico
TTG3/164639 UCOMPOSITE 5.0 A
TTG1/44645 UCOMPOSITE 6.0 A
TTG5/164788 UCOMPOSITE 8.0 A
TTG3/84640 UCOMPOSITE 10.0 A
TTG1/24641 UCOMPOSITE 12.0 A
TTG3/44642 UCOMPOSITE 19.0 A
Page 60
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Produits Verrier International Inc. ; Montreal, QuebecTTG1/85498 UCOMP+CAN 3.0 A
TTG5/325499 UCOMP+CAN 4.0 A
TTG3/165500 UCOMP+CAN 5.0 A
TTG1/45501 UCOMP+CAN 6.0 A
TTG5/167844 UCOMP+CAN 8.0 A
TTG3/85502 UCOMP+CAN 10.0 A
TTG1/25503 UCOMP+CAN 12.0 A
TPG1/85504 UCOMP+CAN 3.0 (s) A
TPG3/165505 UCOMP+CAN 5.0 (s) A
LTG(H)7972 UCOMP+CAN 12,16+ (ev)(A) A(.015)LTG(H)7973 UCOMP+CAN 12-16+ (ev)(A) A(.030)
ProTemp Glass, Inc. ; Concord, ONTTG5/327410 UCOMP+CAN 4.0 A
TTG3/167411 UCOMP+CAN 5.0 A
TTG1/47382 UCOMP+CAN 6.0 A
TTG5/167312 UCOMP+CAN 8.0 A
TTG3/87313 UCOMP+CAN 10.0 A
TTG1/27314 UCOMP+CAN 12.0 A
TTG5/87315 UCOMP+CAN 16.0 A
TTG3/47316 UCOMP+CAN 19.0 A
LTG(H)7907 UCOMP+CAN 10-16+ (b)(A) A(.060)Przedsiebiorstwo TMF s.c. Florczak Tadeusz, Florczak Michal ; Koscielec, Poland
LTG(H)8162 UCOMP+CAN 10 (b)(A) A(.030)PT Abebersa Pratama ; Bekasi, Indonesia
TTG5/323905 UCOMPOSITE 4.0 A
TTG3/163906 UCOMPOSITE 5.0 A
TPG5/328000 UCOMPOSITE 4.0 (s) A
Pulp Studio, Inc. ; Gardena, CATTG3/167860 UCOMP+CAN 5.0 A
TTG1/46416 UCOMP+CAN 6.0 A
TTG3/87807 UCOMP+CAN 10.0 A
TTG1/27808 UCOMP+CAN 12.0 A
LTG(H)4711 UCOMP+CAN 8-16+ (b)(A) A(.030)Qianse Acrylic Co., LTD. ; Dongguan City, Guangdong Province, China
SPS1/87247 UANSI ONLY 3.0 A
Qingdao Himalaya Building Materials Co., Ltd ; ChinaTTG5/168315 UCOMP+CAN 8.0 A
TTG*8316 UCOMP+CAN 12.0 (3) A
Qingdao Ideal Building Material Co. Ltd. ; Qingdao, Shandong
TTG1/86776 UCOMPOSITE 3.0 A
TTG5/326777 UCOMPOSITE 4.0 A
Qingdao Kingdom Glass Co., Ltd. ; Qingdao, Shandong Province
TTG*7681 UCOMP+CAN 12.0 (4) A
Qingdao Laurel Glass Technology Co., Ltd ; Qingdao City, China
TTG1/87125 UCOMP+CAN 3.0 A
TTG5/327110 UCOMP+CAN 4.0 A
TTG1/48063 UCOMP+CAN 6.0 A
TTG5/168019 UCOMP+CAN 8.0 A
TTG3/87126 UCOMP+CAN 10.0 A
TTG1/28020 UCOMP+CAN 12.0 A
LTG(S)8021 UCOMP+CAN 6 (b)(A) A(.030)Qingdao Pioneer Glass Co.,Ltd. ; Qingdao, Shandong
TTG3/88216 UCOMP+CAN 10.0 A
Qingdao Sun Teck Glass Co., Ltd. ; Qingdao, ShandongTTG1/88298 UCOMP+CAN 3.0 A
Qinhuangdao Ampac Building Products Co., Ltd. ; Qinhuangdao Hebei, China
TTG1/85899 UCOMPOSITE 3.0 A
TTG5/325900 UCOMPOSITE 4.0 A
TTG3/165901 UCOMPOSITE 5.0 A
TPG5/325902 UCOMPOSITE 4.0 (s) A
TPG3/165903 UCOMPOSITE 5.0 (d) A
Qinhuangdao Jingxin Glass Co., Ltd. ; Qinhuangdao City, Hebei Province
TTG1/85280 UCOMPOSITE 3.0 A
Qinhuangdao Qicaishi Glass Processing Co., Ltd. ; Qinhuangdao, Hebei, China
TTG1/85141 UCOMPOSITE 3.0 A
Qinhuangdao Rongsheng Glass Processing Co., Ltd. ; Qinhuangdao, Hebei, China
LTG(S)7259 UCOMPOSITE 6 (b)(A) A(.030)QinHuangDao Tianrui Tempered Technology Glass Co. ; Qinhuangdao, Hebei, China
TTG1/83690 UCOMPOSITE 3.0 A
Quaker Window Products, Inc. ; Freeburg, MOTTG1/82985 UCOMP+CAN 3.0 A
TTG5/325297 UCOMP+CAN 4.0 A
TTG3/162986 UCOMP+CAN 5.0 A
TTG1/43485 UCOMP+CAN 6.0 A
TTG5/167935 UCOMP+CAN 8.0 A
TPG1/82968 UCOMP+CAN 3.0 (m) A
TPG5/322969 UCOMP+CAN 4.0 (m)(IN) A
TPG3/163486 UCOMP+CAN 5.0 (m) A
TPG1/42970 UCOMP+CAN 6.0 (m)(IN) A
Quality Enclosures ; Central Islip, NYTTG3/166440 UCOMP+CAN 5.0 A
TTG1/46441 UCOMP+CAN 6.0 A
TTG3/86442 UCOMP+CAN 10.0 A
TTG1/26443 UCOMP+CAN 12.0 A
TPG3/166444 UCOMP+CAN 5.0 (s) A
TPG1/46445 UCOMP+CAN 6.0 (m) A
TPG3/86446 UCOMP+CAN 10.0 (m) A
Page 61
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Quality Enclosures Tempering, Inc. ; Port Orange, FLTTG3/166243 UCOMPOSITE 5.0 A
TTG1/46244 UCOMPOSITE 6.0 A
TTG3/86245 UCOMPOSITE 10.0 A
TTG1/26246 UCOMPOSITE 12.0 A
TPG3/166247 UCOMPOSITE 5.0 (m) A
TPG1/46248 UCOMPOSITE 6.0 (s) A
TPG3/86249 UCOMPOSITE 10.0 (s) A
Quality Glass & Mirror, Inc. ; Mount Prospect, ILTTG3/162981 UCOMPOSITE 5.0 A
TTG1/42982 UCOMPOSITE 6.0 A
TTG3/82983 UCOMPOSITE 10.0 A
TTG1/22984 UCOMPOSITE 12.0 A
TTG3/43805 UCOMPOSITE 19.0 A
Quest USA, Inc. ; Garland, TXTTG1/47659 UCOMP+CAN 6.0 A
Quest Window Systems ; Mississauga, ONTTG1/45719 UCOMP+CAN 6.0 A
Ready Glass & Mirror, Inc. ; Hialeah, FLTTG3/163745 UCOMPOSITE 5.0 A
TTG1/43746 UCOMPOSITE 6.0 A
TTG3/83747 UCOMPOSITE 10.0 A
TTG1/23748 UCOMPOSITE 12.0 A
LTG(H)7013 UCOMPOSITE 8-12 (b)(A)(IN) A(.015)LTG(H)5634 UCOMPOSITE 8-16+ (ip)(A) A(.035)
Reem Emirates Aluminum & Glass ; Abu Dhabi, United Arab Emirates
TTG1/44675 UCOMPOSITE 6.0 A
TTG5/164676 UCOMPOSITE 8.0 A
TTG3/84677 UCOMPOSITE 10.0 A
LTG(H)6971 UCOMPOSITE 16 (b)(A) A(.060)Renin Canada Corp. ; Brampton, ON
TTG3/88278 UCOMP+CAN 10.0 A
Rexlin Glass Ltd. ; Nova Scotia, CanadaTTG1/48210 UCOMP+CAN 6.0 A
TTG3/88211 UCOMP+CAN 10.0 A
Rizhao Huaye Glass Co., Ltd. ; Rizhao, ShandongTTG5/325566 UCOMP+CAN 4.0 A
TTG3/165567 UCOMP+CAN 5.0 A
TTG1/45568 UCOMP+CAN 6.0 A
TTG5/165569 UCOMP+CAN 8.0 A
TTG3/85570 UCOMP+CAN 10.0 A
TTG1/25571 UCOMP+CAN 12.0 A
TTG*5572 UCOMP+CAN 15.0 (4) A
LTG(S)5580 UCOMP+CAN 6 (b)(A) A(.015)LTG(H)5581 UCOMP+CAN 8-16 (b)(A) A(.015)
Robover Inc. ; Quebec City, QCTTG1/85199 UCOMP+CAN 3.0 A
TTG5/325200 UCOMP+CAN 4.0 A
TTG3/165201 UCOMP+CAN 5.0 A
TTG1/45202 UCOMP+CAN 6.0 A
TTG3/85763 UCOMP+CAN 10.0 A
TTG1/25764 UCOMP+CAN 12.0 A
Rohden Vidros LTDA (Unidade 2) ; Pouso Redondo, BrazilTTG5/328103 UCOMP+CAN 4.0 A
TTG1/48192 UCOMP+CAN 6.0 A
S.F. Tempering ; Dania Beach, FLTTG3/165452 UCOMPOSITE 5.0 A
TTG1/45019 UCOMPOSITE 6.0 A
TTG3/85020 UCOMPOSITE 10.0 A
TTG1/25021 UCOMPOSITE 12.0 A
LTG(S)6694 UCOMPOSITE 6 (ev)(A) B(.015)LTG(H)6695 UCOMPOSITE 12-16+ (ev)(A) B(.015)
SAAND Inc. ; Toronto, ONTTG1/82481 UCOMP+CAN 3.0 A
TTG5/322482 UCOMP+CAN 4.0 A
TTG3/163023 UCOMP+CAN 5.0 A
TTG1/42484 UCOMP+CAN 6.0 A
TTG5/164356 UCOMP+CAN 8.0 A
TTG3/84357 UCOMP+CAN 10.0 A
TTG1/24358 UCOMP+CAN 12.0 A
SAAND London ; London, ONTTG1/83978 UCOMP+CAN 3.0 A
TTG5/324278 UCOMP+CAN 4.0 A
TTG3/163979 UCOMP+CAN 5.0 A
TTG1/43980 UCOMP+CAN 6.0 A
TTG5/167658 UCOMP+CAN 8.0 A
TTG3/83981 UCOMP+CAN 10.0 A
TTG1/27536 UCOMP+CAN 12.0 A
SAAND Ottawa ; Stittsville, ONTTG1/84949 UCOMP+CAN 3.0 A
TTG5/324950 UCOMP+CAN 4.0 A
TTG3/164951 UCOMP+CAN 5.0 A
TTG1/44952 UCOMP+CAN 6.0 A
TTG3/84953 UCOMP+CAN 10.0 A
TTG1/24954 UCOMP+CAN 12.0 A
SAAND Rexdale ; Rexdale, ONTTG1/84995 UCOMP+CAN 3.0 A
TTG5/324996 UCOMP+CAN 4.0 A
TTG3/164997 UCOMP+CAN 5.0 A
TTG1/44998 UCOMP+CAN 6.0 A
TTG3/84999 UCOMP+CAN 10.0 A
TTG1/25000 UCOMP+CAN 12.0 A
LTG(S)5001 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)5002 UCOMP+CAN 8-16+ (b)(A) A(.030)
SAGE Electrochromics Inc. ; Faribault, MNLTG(S)7003 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)5016 UCOMP+CAN 8-12 (ip)(A) A(.035)
Saint Gobain Mexico, S.A. de C.V. ; Cuautla, Morelos, Mexico
LTG(S)8152 UCOMP+CAN 6 (b)(A) A(.015)LTG(H)8153 UCOMP+CAN 8 (b)(A) A(.015)LTG(H)8154 UCOMP+CAN 8 (b)(A) A(.030)LTG(H)8155 UCOMP+CAN 10 (b)(A) A(.090)
Page 62
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Saint-Gobain Glassolutions Objekt-Center GmbH ; Radeburg, Germany
TTG1/46913 UCOMP+CAN 6.0 A
TTG5/166914 UCOMP+CAN 8.0 A
TTG3/86915 UCOMP+CAN 10.0 A
LTG(H)6800 UCOMP+CAN 12 (b)(A) A(.030)LTG(H)6801 UCOMP+CAN 16+ (b)(A) A(.060)
Saudi American Glass Company ; Riyadh, Saudi ArabiaTTG1/46192 UCOMPOSITE 6.0 A
TTG5/166193 UCOMPOSITE 8.0 A
LTG(H)6750 UCOMPOSITE 10 (b)(A) A(.060)LTG(H)7506 UCOMPOSITE 12 (ip)(T) A(.060)
Saudi German Aluminum Products Co. ; Sinayah, JeddahTTG1/48093 UCOMP+CAN 6.0 A
TTG5/168094 UCOMP+CAN 8.0 A
TTG3/88095 UCOMP+CAN 10.0 A
TTG1/28096 UCOMP+CAN 12.0 A
LTG(H)8097 UCOMP+CAN 12, 16+ (b)(A) A(.030)SCHOTT Gemtron - Sweetwater ; Sweetwater, TN
TTG1/81334 UCOMP+CAN 3.0 A
TTG5/321332 UCOMP+CAN 4.0 A
TTG3/161201 UCOMP+CAN 5.0 A
TTG1/41477 UCOMP+CAN 6.0 A
TPG1/81422 UCOMP+CAN 3.0 (s) A
TPG5/321424 UCOMP+CAN 4.0 (s) A
SCHOTT Gemtron (Canada) Corporation ; Midland, ON Canada
TTG1/83067 UCOMP+CAN 3.0 A
TTG5/323659 UCOMP+CAN 4.0 A
TTG3/163636 UCOMP+CAN 5.0 A
TTG1/43637 UCOMP+CAN 6.0 A
TTG5/166020 UCOMP+CAN 8.0 A
TTG3/86021 UCOMP+CAN 10.0 A
Selective Shower Glass Designs Inc. ; Medley, FLLTG(H)8314 UCOMP+CAN 10-12 (ip)(A) A(.030)
Senneca Holdings Inc, (Thermoseal Brand) ; Irving, TXTTG1/87640 UCOMPOSITE 3.0 A
TTG3/167641 UCOMPOSITE 5.0 A
TTG1/47642 UCOMPOSITE 6.0 A
Sfera SRL ; Meolo (VE), ItalyTBG5/328087 UCOMP+CAN 4.0 A
TBG1/46079 UCOMP+CAN 6.0 A
TBG5/168086 UCOMP+CAN 8.0 A
Shandong Jinjing Science & Technology Stock Co., Ltd. ; Zibo, Shandong
TTG5/328256 UCOMPOSITE 4.0 A
TTG1/48257 UCOMPOSITE 6.0 A
TTG5/168258 UCOMPOSITE 8.0 A
TTG3/88259 UCOMPOSITE 10.0 A
LTG(H)8250 UCOMPOSITE 12,16 (b)(T) A(.030)LTG(H)8251 UCOMPOSITE 16+ (ip)(T) A(.035)
Shandong Kingtom Glass Co., Ltd. ; Qingdao, Shandong China
TTG3/168311 UCOMP+CAN 5.0 A
TTG1/47917 UCOMP+CAN 6.0 A
TTG5/167918 UCOMP+CAN 8.0 A
TTG3/87919 UCOMP+CAN 10.0 A
TPG3/167916 UCOMP+CAN 5.0 (s) A
TPG1/48312 UCOMP+CAN 6.0 (s) A
Shandong Yaohua Glass Co., Ltd. ; Jinan City, Shandong, China
TTG3/167335 UCOMP+CAN 5.0 A
TTG1/47336 UCOMP+CAN 6.0 A
TTG3/87337 UCOMP+CAN 10.0 A
TTG1/27338 UCOMP+CAN 12.0 A
LTG(S)7967 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)8212 UCOMP+CAN 16+ (ip)(T) A(.035)
Shanghai Bordy Decoration Materials Co., Ltd. ; ShanghaiTTG5/327727 UCOMPOSITE 4.0 A
TTG3/167728 UCOMPOSITE 5.0 A
TTG1/47729 UCOMPOSITE 6.0 A
TTG5/167730 UCOMPOSITE 8.0 A
TTG3/87731 UCOMPOSITE 10.0 A
Shanghai Hangqi Glass Co., LTD. ; Shanghai, ChinaTTG1/26880 UCOMPOSITE 12.0 (IN) A
TTG3/46881 UCOMPOSITE 19.0 (IN) A
LTG(H)6844 UCOMPOSITE 12, 16+ (b)(A)(IN) A(.060)Shanghai SYP Engineering Glass ; Shanghai, China
TTG5/324067 UCOMP+CAN 4.0 A
TTG3/164068 UCOMP+CAN 5.0 A
TTG1/44069 UCOMP+CAN 6.0 A
TTG5/164070 UCOMP+CAN 8.0 A
TTG3/84071 UCOMP+CAN 10.0 A
TTG1/24072 UCOMP+CAN 12.0 A
TTG*4073 UCOMP+CAN 15.0 (4) A
LTG(H)6988 UCOMP+CAN 8-16+ (b)(A) A(.030)Shanghai Zhenzhen Glassware Co., LTD. ; Shanghai, China
TTG1/46125 UCOMP+CAN 6.0 A
TTG3/86126 UCOMP+CAN 10.0 A
Shape Glass LLC. ; Sarasota, FLTTG1/86502 UCOMPOSITE 3.0 A
TTG3/166503 UCOMPOSITE 5.0 A
TTG1/46504 UCOMPOSITE 6.0 A
TTG3/86505 UCOMPOSITE 10.0 A
TTG1/26506 UCOMPOSITE 12.0 A
TPG3/166507 UCOMPOSITE 5.0 (s) A
TPG3/86947 UCOMPOSITE 10.0 (s) A
Shenzhen Sun Global Glass Co., Limited ; Shenzhen, Guangdong
LTG(H)6970 UCOMP+CAN 8-10 (b)(A) A(.060)Shower Doors & More Inc. ; Fort Lauderdale, FL
TTG3/165756 UCOMPOSITE 5.0 A
TTG1/45757 UCOMPOSITE 6.0 A
TTG3/85758 UCOMPOSITE 10.0 A
TTG1/25759 UCOMPOSITE 12.0 A
Page 63
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Sichuan CSG Energy Conservation Glass Co., Ltd. ; Chengdu, Sichuan
TTG3/167050 UCOMPOSITE 5.0 A
TTG1/47051 UCOMPOSITE 6.0 A
TTG5/167052 UCOMPOSITE 8.0 A
TTG3/87053 UCOMPOSITE 10.0 A
TTG1/27054 UCOMPOSITE 12.0 A
TTG*7055 UCOMPOSITE 15.0 (4) A
LTG(H)7056 UCOMPOSITE 10-16+ (b)(A) A(.030)Sierra Glass Fabrication Inc. ; Sparks, NV
TTG1/87670 UCOMPOSITE 3.0 A
TTG3/166186 UCOMPOSITE 5.0 A
SIGCO, Inc. ; Westbrook, METTG1/82961 UCOMPOSITE 3.0 A
TTG5/322962 UCOMPOSITE 4.0 A
TTG3/162963 UCOMPOSITE 5.0 A
TTG1/42964 UCOMPOSITE 6.0 A
TTG5/165213 UCOMPOSITE 8.0 A
TTG3/82965 UCOMPOSITE 10.0 A
TTG1/22966 UCOMPOSITE 12.0 A
TTG5/84326 UCOMPOSITE 16.0 A
TTG3/44327 UCOMPOSITE 19.0 A
TPG3/163028 UCOMPOSITE 5.0 (m) A
TPG3/84206 UCOMPOSITE 10.0 (s) A
LTG(S) 6012 UCOMP+CAN 6 (b)(A) A(.030) LTG(H)6013 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)6014 UCOMP+CAN 8-16+ (ip)(A) A(.060)
Simonton Windows ; Ellenboro, WVTTG1/82887 UCOMPOSITE 3.0 A
TTG3/162888 UCOMPOSITE 5.0 A
TPG1/85296 UCOMPOSITE 3.0 (s) A
Simonton Windows ; Paris, ILTTG1/84979 UCOMPOSITE 3.0 A
TTG3/164978 UCOMPOSITE 5.0 A
TPG1/87251 UCOMPOSITE 3.0 (m) A
Singh Glass & Mirror Inc. dba Luso Glass Company ; Newark, NJ
TTG3/168070 UCOMPOSITE 5.0 A
TTG1/48071 UCOMPOSITE 6.0 A
TTG3/88072 UCOMPOSITE 10.0 A
TTG1/28073 UCOMPOSITE 12.0 A
TTG5/88074 UCOMPOSITE 16.0 A
TTG3/48075 UCOMPOSITE 19.0 A
Sisecam Flat Glass Italy S.r.l. ; S. Giorgio Di Nogaro, Udine
LTG(S)8132 UCOMP+CAN 6 (b)(A) A(.015)LTG(H)8133 UCOMP+CAN 8-12 (b)(A) A(.015)
Sky Land Tempering Glass Corp ; Long Island City, NYTTG3/165467 UCOMPOSITE 5.0 A
TTG1/45468 UCOMPOSITE 6.0 A
TTG3/85469 UCOMPOSITE 10.0 A
TTG1/25470 UCOMPOSITE 12.0 A
Skyline Design ; Chicago, ILTTG1/46340 UCOMP+CAN 6.0 A
TTG1/26343 UCOMP+CAN 12.0 A
TPG1/46347 UCOMP+CAN 6.0 (s) A
TPG1/26350 UCOMP+CAN 12.0 (s) A
Solar Seal Massachusetts ; South Easton, MATTG1/83001 UCOMPOSITE 3.0 A
TTG3/161871 UCOMPOSITE 5.0 A
TTG1/41035 UCOMPOSITE 6.0 A
TTG3/81036 UCOMPOSITE 10.0 A
TTG1/21037 UCOMPOSITE 12.0 A
TTG3/45527 UCOMPOSITE 19.0 A
TPG3/161939 UCOMPOSITE 5.0 (s) A
South Bay Showers, Inc. ; Santa Clara, CATTG1/47252 UCOMPOSITE 6.0 A
TTG5/167253 UCOMPOSITE 8.0 (IN) A
TTG3/86927 UCOMPOSITE 10.0 A
TTG1/26928 UCOMPOSITE 12.0 A
TPG3/87254 UCOMPOSITE 10.0 (s) A
Southern Wholesale Glass, Inc. ; Americus, GATTG1/47349 UCOMPOSITE 6.0 A
TTG3/87350 UCOMPOSITE 10.0 A
Splendor Shower Door ; Holland, OHTTG5/327753 UCOMPOSITE 4.0 A
TTG3/167754 UCOMPOSITE 5.0 A
TTG1/47755 UCOMPOSITE 6.0 A
TTG3/87756 UCOMPOSITE 10.0 A
TTG1/27757 UCOMPOSITE 12.0 A
TPG5/327758 UCOMPOSITE 4.0 (s) A
TPG3/167759 UCOMPOSITE 5.0 (m) A
TPG1/47760 UCOMPOSITE 6.0 (m) A
TPG3/87761 UCOMPOSITE 10.0 (s) A
Standard Bent Glass ; East Butler, PATTG3/166300 UCOMP+CAN 5.0 A
TTG1/46301 UCOMP+CAN 6.0 A
TTG5/166302 UCOMP+CAN 8.0 A
TTG3/86303 UCOMP+CAN 10.0 A
TTG1/26304 UCOMP+CAN 12.0 A
TBG1/47674 UCOMP+CAN 6.0 A
TBG5/167675 UCOMP+CAN 8.0 A
TBG3/87676 UCOMP+CAN 10.0 A
TBG1/27677 UCOMP+CAN 12.0 A
LTG(S)7537 UCOMP+CAN 6 (ip)(A) A(.035)LTG(S)6305 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7538 UCOMP+CAN 10-16+ (ip)(A) A(.035)LTG(H)6306 UCOMP+CAN 10-16+ (b)(A) A(.030)
Stargrup Cam A.S. ; Arnavutkoy, IstanbulTTG5/328219 UCOMPOSITE 4.0 A
TTG3/168220 UCOMPOSITE 5.0 A
TTG1/46204 UCOMPOSITE 6.0 A
TTG5/167579 UCOMPOSITE 8.0 A
TTG3/86205 UCOMPOSITE 10.0 A
TTG1/26206 UCOMPOSITE 12.0 A
LTG(H)8221 UCOMPOSITE 8-16+ (ip)(A) A(.035)LTG(H)6207 UCOMPOSITE 8-16+ (b)(A) A(.015)
Page 64
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Strong Tempering Glass Industry LLC ; Brooklyn, NYTTG3/165939 UCOMPOSITE 5.0 A
TTG1/45940 UCOMPOSITE 6.0 A
TTG3/85942 UCOMPOSITE 10.0 A
TTG1/25941 UCOMPOSITE 12.0 A
Sunfire Glass, Inc. ; Medley, FLTTG3/167036 UCOMPOSITE 5.0 A
TTG1/47033 UCOMPOSITE 6.0 A
TTG3/87037 UCOMPOSITE 10.0 A
TTG1/27405 UCOMPOSITE 12.0 A
TPG3/167038 UCOMPOSITE 5.0 (s) A
Sunglas Technics Co., Ltd. ; Foshan, Guangdong, ChinaTTG1/48090 UCOMPOSITE 6.0 A
Swift Glass Co., Inc. ; Elmira Heights, NYTTG1/81555 UCOMPOSITE 3.0 A
TTG3/161556 UCOMPOSITE 5.0 A
TTG1/41557 UCOMPOSITE 6.0 A
TTG3/81558 UCOMPOSITE 10.0 A
TTG1/21559 UCOMPOSITE 12.0 A
Syracuse Glass Company, LLC ; Syracuse, NYTTG1/82654 UCOMP+CAN 3.0 A
TTG3/162957 UCOMP+CAN 5.0 A
TTG1/42656 UCOMP+CAN 6.0 A
TTG3/82958 UCOMP+CAN 10.0 A
TTG1/22657 UCOMP+CAN 12.0 A
LTG(S)6391 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)6393 UCOMP+CAN 8-16+ (ip)(A) A(.060)LTG(H)6392 UCOMP+CAN 8-16+ (b)(A) A(.030)
Tacoma Glass Mfg. Inc. ; Burlington, WATTG1/45165 UCOMPOSITE 6.0 A
TTG3/85166 UCOMPOSITE 10.0 A
TTG1/25167 UCOMPOSITE 12.0 A
Tacoma Glass Mfg. Inc. ; Tacoma, WATTG1/48188 UCOMPOSITE 6.0 A
TTG3/88189 UCOMPOSITE 10.0 A
TTG1/28190 UCOMPOSITE 12.0 A
LTG(S)8186 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)8187 UCOMPOSITE 8 (b)(A) A(.030)
Tai Shan City Da Heng Art Glass Ltd. ; Tai Shan, Guangdong, China
TTG1/83787 UCOMP+CAN 3.0 A
Tai Sheng (Dong Guan) Glass Co.,Ltd ; Dongguan, Guangdong, China
TTG1/86140 UCOMP+CAN 3.0 A
TTG5/324870 UCOMP+CAN 4.0 A
TTG3/165487 UCOMP+CAN 5.0 A
TTG1/44872 UCOMP+CAN 6.0 A
TTG5/164873 UCOMP+CAN 8.0 A
TTG3/85486 UCOMP+CAN 10.0 A
TTG1/25604 UCOMP+CAN 12.0 A
TPG1/86141 UCOMP+CAN 3.0 (s) A
TPG5/325067 UCOMP+CAN 4.0 (m) A
TPG3/165488 UCOMP+CAN 5.0 (m) A
TPG1/45068 UCOMP+CAN 6.0 (m) A
TBP3/166054 UCOMP+CAN 5.0 (s) A
TBG3/166053 UCOMP+CAN 5.0 A
TBG1/46055 UCOMP+CAN 6.0 A
TBG5/166142 UCOMP+CAN 8.0 A
Technical Glass Company ; Jeddah, WesternTTG1/47952 UCOMP+CAN 6.0 A
TTG5/167953 UCOMP+CAN 8.0 A
TTG3/87954 UCOMP+CAN 10.0 A
TTG*7955 UCOMP+CAN 12.0 (7) A
LTG(H)7956 UCOMP+CAN 8,12-16+ (b)(A) A(.030)Techni-Glass, Inc. ; Surgoinsville, TN
TTG1/82547 UCOMP+CAN 3.0 A
TTG5/322548 UCOMP+CAN 4.0 A
TTG3/162549 UCOMP+CAN 5.0 A
TTG1/42975 UCOMP+CAN 6.0 A
TTG3/83062 UCOMP+CAN 10.0 A
TTG1/24509 UCOMP+CAN 12.0 A
TTG5/84510 UCOMP+CAN 16.0 A
TPG1/83061 UCOMP+CAN 3.0 (m) A
TPG5/325050 UCOMP+CAN 4.0 (m) A
TPG3/162550 UCOMP+CAN 5.0 (m) A
TPG1/43060 UCOMP+CAN 6.0 (s) A
Tecnoglass S.A.S. ; Barranquilla, ColombiaTTG1/82133 UCOMP+CAN 3.0 A
TTG5/322287 UCOMP+CAN 4.0 A
TTG3/161993 UCOMP+CAN 5.0 A
TTG1/41994 UCOMP+CAN 6.0 A
TTG5/162134 UCOMP+CAN 8.0 A
TTG3/81995 UCOMP+CAN 10.0 A
TTG1/22135 UCOMP+CAN 12.0 A
TTG5/82365 UCOMP+CAN 16.0 A
TTG3/42894 UCOMP+CAN 19.0 A
LTG(H)4003 UCOMP+CAN 8-16+ (b)(A) A(.030)Tecnovidrio S.A. de C.V. ; Colonia Granjas Mexico, Delegacion Iztacalco
TTG1/47272 UCOMP+CAN 6.0 A
TTG3/87273 UCOMP+CAN 10.0 A
TTG1/27274 UCOMP+CAN 12.0 A
TTG3/47275 UCOMP+CAN 19.0 A
LTG(H)7256 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)8156 UCOMP+CAN 10-16+ (b)(A) A(.015)
TEMCOR S. DE RL DE CV ; H. Matamoros, Tamps MexicoTTG3/88051 UCOMPOSITE 10.0 A
TTG1/28050 UCOMPOSITE 12.0 A
Page 65
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Temp Glass Inc. ; El Paso, TXTTG3/166698 UCOMPOSITE 5.0 A
TTG1/46699 UCOMPOSITE 6.0 A
TTG3/86700 UCOMPOSITE 10.0 A
TTG1/26701 UCOMPOSITE 12.0 A
Tempco Glass ; Flushing, NYTTG1/86715 UCOMPOSITE 3.0 A
TTG3/165010 UCOMPOSITE 5.0 A
TTG1/45011 UCOMPOSITE 6.0 A
TTG5/167285 UCOMPOSITE 8.0 A
TTG3/85012 UCOMPOSITE 10.0 A
TTG1/25013 UCOMPOSITE 12.0 A
Templados Del Centro SA DE C.V. ; Irapuato, Guanajuato, Mexico
LTG(H)6170 UCOMP+CAN 10 (b)(A) A(.060)LTG(H)6019 UCOMP+CAN 12 (b)(A) A(.030)
Templados Industriales S.A. de C.V. ; Chihuahua, MexicoTTG1/47880 UCOMPOSITE 6.0 A
TTG3/87881 UCOMPOSITE 10.0 A
Tengzhou Fenghua Glass Co., LTD ; Tengzhou, ChinaTTG3/166418 UCOMP+CAN 5.0 A
TTG1/46419 UCOMP+CAN 6.0 A
TTG5/166420 UCOMP+CAN 8.0 A
TTG3/86421 UCOMP+CAN 10.0 A
TTG1/26422 UCOMP+CAN 12.0 A
TPG5/326424 UCOMP+CAN 4.0 (s) A
TPG3/166425 UCOMP+CAN 5.0 (s) A
TPG1/46426 UCOMP+CAN 6.0 (s) A
TPG3/86427 UCOMP+CAN 10.0 (s) A
LTG(S)7936 UCOMP+CAN 6 (b)(A) A(.030)TG Qingdao Glass Co., Ltd. ; Qingdao, Shandong Province
LTG(S)8194 UCOMP+CAN 6 (b)(A) A(.030)TG Taicang Architectural Glass Co. Ltd ; Taicang City, Jiangsu
TTG3/167446 UCOMP+CAN 5.0 A
TTG1/47447 UCOMP+CAN 6.0 A
TTG5/167448 UCOMP+CAN 8.0 A
TTG3/87449 UCOMP+CAN 10.0 A
TTG1/27450 UCOMP+CAN 12.0 A
LTG(H)7432 UCOMP+CAN 8 (b)(A) A(.090)LTG(H)7058 UCOMP+CAN 8 (ip)(A) A(.090)LTG(H)7433 UCOMP+CAN 10-12 (b)(A) A(.060)LTG(H)6774 UCOMP+CAN 10 (ip)(A) A(.035)
The Original Frameless Shower Door ; Coral Springs, FLTTG3/84662 UCOMPOSITE 10.0 A
TTG1/24663 UCOMPOSITE 12.0 A
Thermafix A.J. Inc. ; Baie St. Paul, QCTTG1/88326 UCOMP+CAN 3.0 A
TTG5/328327 UCOMP+CAN 4.0 A
TTG3/168328 UCOMP+CAN 5.0 A
TTG1/48329 UCOMP+CAN 6.0 A
TTG3/88330 UCOMP+CAN 10.0 A
TPG1/88324 UCOMP+CAN 3.0 (m) A
TPG3/168325 UCOMP+CAN 5.0 (s) A
Thermal Seal Insulating Glass ; Uxbridge, MATTG1/85731 UCOMPOSITE 3.0 A
TTG5/325732 UCOMPOSITE 4.0 A
TTG3/165733 UCOMPOSITE 5.0 A
TTG1/45734 UCOMPOSITE 6.0 A
TTG3/85735 UCOMPOSITE 10.0 A
TTG1/25736 UCOMPOSITE 12.0 A
TPG1/85730 UCOMPOSITE 3.0 (s) A
Thermalsun Glass Products ; Santa Rosa, CATTG1/86265 UCOMPOSITE 3.0 A
TTG5/326266 UCOMPOSITE 4.0 A
TTG3/166267 UCOMPOSITE 5.0 A
TTG1/46268 UCOMPOSITE 6.0 A
TTG3/86269 UCOMPOSITE 10.0 A
TTG1/26270 UCOMPOSITE 12.0 A
Thermo BSL ; Riviere-du-loup, QCTTG1/84290 UCOMP+CAN 3.0 A
TTG5/324291 UCOMP+CAN 4.0 A
TTG3/164292 UCOMP+CAN 5.0 A
TTG1/44293 UCOMP+CAN 6.0 A
LTG(S)7094 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)5673 UCOMP+CAN 8 (b)(A) A(.030)LTG(H)5674 UCOMP+CAN 10 (ip)(A) A(.090)
Thiele Glas Werk GmbH ; Wermsdorf, GermanyLSP(H)8065 UCOMP+CAN 29 (ip)(A) A(.060)X2
Thompson I.G. LLC. ; Fenton, MITTG1/85303 UCOMP+CAN 3.0 A
TTG3/165304 UCOMP+CAN 5.0 A
TTG1/45305 UCOMP+CAN 6.0 A
TTG3/85298 UCOMP+CAN 10.0 A
TTG1/25299 UCOMP+CAN 12.0 A
LTG(H)8180 UCOMP+CAN 8-12 (b)(A) A(.030)LTG(H)7025 UCOMP+CAN 8-12 (ip)(A) A(.035)
Tianjin CSG Energy Conservation Glass Co., Ltd ; Tianjin, China
TTG5/324021 UCOMP+CAN 4.0 A
TTG3/164022 UCOMP+CAN 5.0 A
TTG1/44023 UCOMP+CAN 6.0 A
TTG5/164024 UCOMP+CAN 8.0 A
TTG3/84025 UCOMP+CAN 10.0 A
TTG1/24026 UCOMP+CAN 12.0 A
TTG*4027 UCOMP+CAN 15.0 (4) A
TTG3/44028 UCOMP+CAN 19.0 A
LTG(H)4030 UCOMP+CAN 8-16+ (b)(A) A(.030)Tianjin Northglass Industrial Technical Co., Ltd ; Tianjin, China
TTG5/165220 UCOMPOSITE 8.0 A
TTG*5221 UCOMPOSITE 12.0 (3) A
LTG(H)6044 UCOMPOSITE 12 (b)(A) A(.060)LTG(H)5223 UCOMPOSITE 18+ (ip)(A) A(.060)
Page 66
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Tianjin SYP Engineering Glass Co., Ltd. ; Tianjin, ChinaTTG3/164075 UCOMP+CAN 5.0 A
TTG1/44076 UCOMP+CAN 6.0 A
TTG5/164077 UCOMP+CAN 8.0 A
TTG3/84078 UCOMP+CAN 10.0 A
TTG*4079 UCOMP+CAN 12.0 (4) A
TTG*4080 UCOMP+CAN 15.0 (4) A
TTG3/44081 UCOMP+CAN 19.0 A
LTG(H)4084 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)8035 UCOMP+CAN 10-16+ (ip)(A) A(.035)
Tomakk Glass Partners, LLC ; Shreveport, LATTG1/87736 UCOMP+CAN 3.0 A
TTG3/167737 UCOMP+CAN 5.0 A
TTG1/47738 UCOMP+CAN 6.0 A
TTG3/87739 UCOMP+CAN 10.0 A
TTG1/27740 UCOMP+CAN 12.0 A
Trakya Glass Bulgaria EAD ; Targovishte, BulgariaLTG(S)8203 UCOMP+CAN 6 (b)(A) A(.015)LTG(H)8204 UCOMP+CAN 8-12 (b)(A) A(.015)
Tristar Glass, Inc. ; Catoosa, OKTTG1/84004 UCOMPOSITE 3.0 A
TTG5/324005 UCOMPOSITE 4.0 A
TTG3/164006 UCOMPOSITE 5.0 A
TTG1/44007 UCOMPOSITE 6.0 A
TTG5/167072 UCOMPOSITE 8.0 A
TTG3/84008 UCOMPOSITE 10.0 A
TTG1/24009 UCOMPOSITE 12.0 A
TTG3/47073 UCOMPOSITE 19.0 A
TPG5/327590 UCOMPOSITE 4.0 (s) A
TPG3/164011 UCOMPOSITE 5.0 (m) A
LTG(S)5441 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)4411 UCOMPOSITE 10-16+ (b)(A) A(.030)
Tristar Glass, Inc. ; Grand Prairie, TXTTG1/45109 UCOMPOSITE 6.0 A
Tristar Glass, Inc. ; Houston, TXTTG1/45762 UCOMPOSITE 6.0 A
TTG5/167080 UCOMPOSITE 8.0 A
TTG3/87081 UCOMPOSITE 10.0 A
Triton Glass LLC ; Albemarle, NCTTG1/85690 UCOMPOSITE 3.0 A
TTG3/165691 UCOMPOSITE 5.0 A
TTG1/45692 UCOMPOSITE 6.0 A
TTG3/85693 UCOMPOSITE 10.0 A
TTG1/25694 UCOMPOSITE 12.0 A
Troy Systems LLC ; Manassas, VATTG3/164918 UCOMPOSITE 5.0 A
TTG1/44061 UCOMPOSITE 6.0 A
TTG3/84062 UCOMPOSITE 10.0 A
TTG1/24063 UCOMPOSITE 12.0 A
TPG3/85123 UCOMPOSITE 10.0 (s) A
Trulite Glass & Aluminum Solutions Canada, ULC ; Bois-des-Filion, QC
TTG3/166061 UCOMP+CAN 5.0 A
TTG1/46062 UCOMP+CAN 6.0 A
TTG5/166063 UCOMP+CAN 8.0 A
TTG3/86064 UCOMP+CAN 10.0 A
TTG1/26065 UCOMP+CAN 12.0 A
TTG5/86066 UCOMP+CAN 16.0 A
TTG3/46067 UCOMP+CAN 19.0 A
Trulite Glass and Aluminum Solutions ; Aurora, COTTG1/85341 UCOMPOSITE 3.0 A
TTG5/325348 UCOMPOSITE 4.0 A
TTG3/166613 UCOMPOSITE 5.0 A
TTG1/45343 UCOMPOSITE 6.0 A
TTG3/85344 UCOMPOSITE 10.0 A
TTG1/25345 UCOMPOSITE 12.0 A
TTG3/45346 UCOMPOSITE 19.0 A
TPG3/165349 UCOMPOSITE 5.0 (m) A
TPG3/85350 UCOMPOSITE 10.0 (s) A
Trulite Glass and Aluminum Solutions ; Bradenton, FLTTG1/88240 UCOMPOSITE 3.0 A
TTG3/165860 UCOMPOSITE 5.0 A
TTG1/44225 UCOMPOSITE 6.0 A
TTG3/84226 UCOMPOSITE 10.0 A
TTG1/24227 UCOMPOSITE 12.0 A
TTG5/87998 UCOMPOSITE 16.0 A
TTG3/47999 UCOMPOSITE 19.0 A
TPG3/166189 UCOMPOSITE 5.0 (d) A
TPG3/86190 UCOMPOSITE 10.0 (s) A
Trulite Glass and Aluminum Solutions ; Cheswick, PATTG3/161785 UCOMPOSITE 5.0 A
TTG1/41786 UCOMPOSITE 6.0 A
TTG5/163495 UCOMPOSITE 8.0 A
TTG3/81787 UCOMPOSITE 10.0 A
TTG1/21788 UCOMPOSITE 12.0 A
TTG5/84134 UCOMPOSITE 16.0 A
TTG3/44135 UCOMPOSITE 19.0 A
TPG3/161790 UCOMPOSITE 5.0 (s) A
TPG3/84453 UCOMPOSITE 10.0 (s) A
Trulite Glass and Aluminum Solutions ; City of Industry, CA
TTG3/164184 UCOMPOSITE 5.0 A
TTG1/44185 UCOMPOSITE 6.0 A
TTG3/84186 UCOMPOSITE 10.0 A
TTG1/24187 UCOMPOSITE 12.0 A
TTG5/84522 UCOMPOSITE 16.0 A
TTG3/44371 UCOMPOSITE 19.0 A
LTG(S)4233 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)6010 UCOMPOSITE 8-16+ (b)(A) A(.030)LTG(H) 6011 U COMPOSITE 10-16+ (ip)(A) A(.060)
Page 67
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Trulite Glass and Aluminum Solutions ; Columbus, OHTTG1/84745 UCOMPOSITE 3.0 A
TTG3/164746 UCOMPOSITE 5.0 A
TTG1/44747 UCOMPOSITE 6.0 A
TTG3/86159 UCOMPOSITE 10.0 A
TTG1/24748 UCOMPOSITE 12.0 A
TPG1/86165 UCOMPOSITE 3.0 (m) A
TPG5/326166 UCOMPOSITE 4.0 (d) A
TPG3/166167 UCOMPOSITE 5.0 (m) A
TPG1/46168 UCOMPOSITE 6.0 (m) A
TPG3/86169 UCOMPOSITE 10.0 (s) A
LTG(S)7460 UCOMPOSITE 6 (ip)(A) A(.035)LTG(S)7459 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)7461 UCOMPOSITE 8-16+ (b)(A) A(.030)LTG(H)7525 UCOMPOSITE 8-16+ (ip)(A) A(.035)
Trulite Glass and Aluminum Solutions ; Fort Worth, TXTTG5/325397 UCOMPOSITE 4.0 A
TTG3/165398 UCOMPOSITE 5.0 A
TTG1/45399 UCOMPOSITE 6.0 A
TTG3/85400 UCOMPOSITE 10.0 A
TTG1/25401 UCOMPOSITE 12.0 A
TTG5/86389 UCOMPOSITE 16.0 A
TTG3/46388 UCOMPOSITE 19.0 A
TPG3/165404 UCOMPOSITE 5.0 (m) A
TPG3/85405 UCOMPOSITE 10.0 (m) A
LTG(S)3603 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)5783 UCOMPOSITE 8-16+ (b)(A) A(.030)LTG(H)5728 UCOMPOSITE 8-16+ (ip)(A) A(.035)
Trulite Glass and Aluminum Solutions ; Grenada, MSTTG1/82787 UCOMPOSITE 3.0 A
TTG3/162788 UCOMPOSITE 5.0 A
TTG1/42789 UCOMPOSITE 6.0 A
TTG3/82840 UCOMPOSITE 10.0 A
LTG(S)6769 UCOMPOSITE 5 (b)(A) A(.030)LTG(S)6760 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)7014 UCOMPOSITE 8 (b)(A) A(.090)LTG(H)6615 UCOMPOSITE 8 (b)(A) A(.060)LTG(H)5898 UCOMPOSITE 10-12 (ip)(A) A(.035)LTG(H)4744 UCOMPOSITE 10-16+ (b)(A) A(.030)
Trulite Glass and Aluminum Solutions ; Houston, TXTTG1/85432 UCOMP+CAN 3.0 A
TTG5/327018 UCOMP+CAN 4.0 A
TTG3/163925 UCOMP+CAN 5.0 A
TTG1/45483 UCOMP+CAN 6.0 A
TTG3/83927 UCOMP+CAN 10.0 A
TTG1/23928 UCOMP+CAN 12.0 A
TTG5/85477 UCOMP+CAN 16.0 A
TTG3/47828 UCOMP+CAN 19.0 A
TPG1/85433 UCOMP+CAN 3.0 (s) A
TPG3/163931 UCOMP+CAN 5.0 (m) A
LTG(S)5434 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)6741 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)6742 UCOMP+CAN 10-16+ (ip)(A) A(.035)
Trulite Glass and Aluminum Solutions ; Indianapolis, INTTG3/164922 UCOMPOSITE 5.0 A
TTG1/44923 UCOMPOSITE 6.0 A
TTG3/84754 UCOMPOSITE 10.0 A
TTG1/24753 UCOMPOSITE 12.0 A
TTG5/87086 UCOMPOSITE 16.0 A
TPG3/164750 UCOMPOSITE 5.0 (s) A
Trulite Glass and Aluminum Solutions ; Knoxville, TNTTG1/84209 UCOMPOSITE 3.0 A
TTG5/324827 UCOMPOSITE 4.0 A
TTG3/164152 UCOMPOSITE 5.0 A
TTG1/44153 UCOMPOSITE 6.0 A
TTG3/84158 UCOMPOSITE 10.0 A
TTG1/24159 UCOMPOSITE 12.0 A
TPG1/84207 UCOMPOSITE 3.0 (m) A
TPG5/324981 UCOMPOSITE 4.0 (d) A
TPG3/164160 UCOMPOSITE 5.0 (d) A
TPG3/85134 UCOMPOSITE 10.0 (m) A
Trulite Glass and Aluminum Solutions ; Las Vegas, NVTTG1/84210 UCOMPOSITE 3.0 A
TTG3/164212 UCOMPOSITE 5.0 A
TTG1/44213 UCOMPOSITE 6.0 A
TTG3/84214 UCOMPOSITE 10.0 A
TTG1/24215 UCOMPOSITE 12.0 A
TTG3/44216 UCOMPOSITE 19.0 A
TPG1/84217 UCOMPOSITE 3.0 (s) A
TPG3/164219 UCOMPOSITE 5.0 (m) A
TPG1/44220 UCOMPOSITE 6.0 (s) A
TPG3/84221 UCOMPOSITE 10.0 (s) A
Trulite Glass and Aluminum Solutions ; Lithia Springs, GATTG3/166102 UCOMP+CAN 5.0 A
TTG1/46103 UCOMP+CAN 6.0 A
TTG3/86104 UCOMP+CAN 10.0 A
TTG1/26105 UCOMP+CAN 12.0 A
TTG5/86106 UCOMP+CAN 16.0 A
TTG3/46107 UCOMP+CAN 19.0 A
TPG3/166113 UCOMP+CAN 5.0 (m) A
TPG1/46114 UCOMP+CAN 6.0 (m)(IN) A
TPG3/86115 UCOMP+CAN 10.0 (s) A
LTG(S)6108 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)6110 UCOMP+CAN 6 (ip)(A)(IN) A(.060)LTG(H)7563 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7564 UCOMP+CAN 8-16+ (ip)(A) A(.060)
Trulite Glass and Aluminum Solutions ; New Berlin, WITTG1/85876 UCOMPOSITE 3.0 A
TTG3/165318 UCOMPOSITE 5.0 A
TTG1/45877 UCOMPOSITE 6.0 A
TTG5/165320 UCOMPOSITE 8.0 A
TTG3/85321 UCOMPOSITE 10.0 A
TTG1/25322 UCOMPOSITE 12.0 A
TTG5/85896 UCOMPOSITE 16.0 A
TTG3/45897 UCOMPOSITE 19.0 A
LTG(S)3430 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)5937 UCOMPOSITE 8-16+ (ip)(A) A(.060)LTG(H)5936 UCOMPOSITE 8-12 (b)(A) A(.030)
Page 68
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Trulite Glass and Aluminum Solutions ; Orlando, FLTTG1/85183 UCOMPOSITE 3.0 A
TTG3/165185 UCOMPOSITE 5.0 A
TTG1/45184 UCOMPOSITE 6.0 A
TTG3/85186 UCOMPOSITE 10.0 A
TTG1/25187 UCOMPOSITE 12.0 A
TTG5/85680 UCOMPOSITE 16.0 A
TPG1/85189 UCOMPOSITE 3.0 (s) A
TPG3/165190 UCOMPOSITE 5.0 (m) A
TPG1/45191 UCOMPOSITE 6.0 (m) A
TPG3/85192 UCOMPOSITE 10.0 (s) A
LTG(S)3461 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)5484 UCOMPOSITE 8-16+ (b)(A) A(.030)LTG(H)5485 UCOMPOSITE 10-12 (ip)(A) A(.060)
Trulite Glass and Aluminum Solutions ; Phoenix, AZTTG5/325701 UCOMPOSITE 4.0 (IN) A
TTG3/165702 UCOMPOSITE 5.0 (IN) A
TTG1/45746 UCOMPOSITE 6.0 (IN) A
TTG3/85703 UCOMPOSITE 10.0 (IN) A
TTG1/25704 UCOMPOSITE 12.0 (IN) A
TTG3/47002 UCOMPOSITE 19.0 (IN) A
TPG5/327878 UCOMPOSITE 4.0 (d)(IN) A
TPG3/165706 UCOMPOSITE 5.0 (m)(IN) A
TPG1/46759 UCOMPOSITE 6.0 (m)(IN) A
TPG3/85747 UCOMPOSITE 10.0 (m)(IN) A
Trulite Glass and Aluminum Solutions ; Salt Lake City, UTTTG1/86447 UCOMPOSITE 3.0 A
TTG3/165337 UCOMPOSITE 5.0 A
TTG1/45338 UCOMPOSITE 6.0 A
TTG3/85339 UCOMPOSITE 10.0 A
TTG1/25340 UCOMPOSITE 12.0 A
TTG5/87580 UCOMPOSITE 16.0 A
TPG3/166006 UCOMPOSITE 5.0 (m) A
TPG1/46007 UCOMPOSITE 6.0 (m) A
TPG3/86008 UCOMPOSITE 10.0 (s) A
Trulite Glass and Aluminum Solutions ; Tulsa, OKTTG1/85687 UCOMPOSITE 3.0 A
TTG5/325443 UCOMPOSITE 4.0 A
TTG3/165444 UCOMPOSITE 5.0 A
TTG1/45445 UCOMPOSITE 6.0 A
TTG3/85446 UCOMPOSITE 10.0 A
TTG1/25447 UCOMPOSITE 12.0 A
TPG1/85688 UCOMPOSITE 3.0 (s) A
TPG5/325448 UCOMPOSITE 4.0 (d) A
TPG3/165449 UCOMPOSITE 5.0 (m) A
TPG3/85451 UCOMPOSITE 10.0 (s) A
Trulite Glass and Aluminum Solutions ; Woodbridge, ONTTG5/325507 UCOMP+CAN 4.0 A
TTG3/165508 UCOMP+CAN 5.0 A
TTG1/45509 UCOMP+CAN 6.0 A
TTG5/165510 UCOMP+CAN 8.0 A
TTG3/85511 UCOMP+CAN 10.0 A
TTG1/25782 UCOMP+CAN 12.0 A
LTG(S)5631 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7290 UCOMP+CAN 8-16+ (b)(A) A(.030)
Trulite Glass and Aluminum Solutions ; Youngsville, NCTTG5/325517 UCOMPOSITE 4.0 A
TTG3/165273 UCOMPOSITE 5.0 A
TTG1/45274 UCOMPOSITE 6.0 A
TTG5/165518 UCOMPOSITE 8.0 A
TTG3/85275 UCOMPOSITE 10.0 A
TTG1/25276 UCOMPOSITE 12.0 A
TTG5/86009 UCOMPOSITE 16.0 A
TTG3/45277 UCOMPOSITE 19.0 A
TPG3/165279 UCOMPOSITE 5.0 (m) A
TPG3/86187 UCOMPOSITE 10.0 (s) A
LTG(S)7951 UCOMPOSITE 6 (b)(A) A(.030)LTGH7599 UCOMPOSITE 8.0 (b)(A) A(.030)LTG(H)7705 UCOMPOSITE 10-16+ (ip)(A) A(.060)
Türkiye Şişe ve CamFabrikaları A.Ş. ŞişecamDüzcam
Bursa FabrikaıSubesi ; Yenişehir/Bursa
LTG(H)8193 UCOMP+CAN 10-12 (b)(A) A(.015)TVITEC ; Cubillo del Sil, Spain
LTG(H)7573 UCOMP+CAN 10 (b)(A) A(.060)LTG(H)7370 UCOMP+CAN 10-16+ (b)(A) A(.030)LTG(H)5519 UCOMP+CAN 12, 16+ (ip)(A) A(.030)
Tweddells Inc. ; Santa Ana, CATTG1/85384 UCOMP+CAN 3.0 A
TTG3/164993 UCOMP+CAN 5.0 A
TTG1/45385 UCOMP+CAN 6.0 A
TTG3/85386 UCOMP+CAN 10.0 A
U.S. Glass Distributors Inc. ; Enfield, CTTTG1/85921 UCOMP+CAN 3.0 A
TTG3/165922 UCOMP+CAN 5.0 A
TTG1/45923 UCOMP+CAN 6.0 A
TTG5/165924 UCOMP+CAN 8.0 A
TTG3/85925 UCOMP+CAN 10.0 A
TTG1/25926 UCOMP+CAN 12.0 A
TTG5/85927 UCOMP+CAN 16.0 A
TTG3/46157 UCOMP+CAN 19.0 A
TPG5/325917 UCOMP+CAN 4.0 (d) A
TPG3/165918 UCOMP+CAN 5.0 (m) A
TPG3/85920 UCOMP+CAN 10.0 (s)(IN) A
LTG(S)7619 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)6864 UCOMP+CAN 10,16+ (ip)(A) A(.035)
Uniglass ; Riyadh, Saudi ArabiaTTG1/47029 UCOMPOSITE 6.0 A
TTG5/167030 UCOMPOSITE 8.0 A
TTG3/87031 UCOMPOSITE 10.0 A
TTG*7032 UCOMPOSITE 12.0 (7) A
LTG(H)7462 UCOMPOSITE 12 (b)(A) A(.030)
Page 69
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
United Plate Glass Co., Inc. ; Butler, PATTG1/82467 UCOMP+CAN 3.0 A
TTG3/162468 UCOMP+CAN 5.0 A
TTG1/42469 UCOMP+CAN 6.0 A
TTG3/82470 UCOMP+CAN 10.0 A
TTG1/22471 UCOMP+CAN 12.0 A
TPG5/326375 UCOMP+CAN 4.0 (m) A
LTG(S)6224 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)6250 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)6251 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)6225 UCOMP+CAN 8-16+ (b)(A) A(.030)
United Plate Glass Company of Charlotte ; Lincolnton, NCTTG1/83948 UCOMP+CAN 3.0 A
TTG5/324197 UCOMPOSITE 4.0 A
TTG3/163949 UCOMP+CAN 5.0 A
TTG1/43950 UCOMP+CAN 6.0 A
TTG3/83951 UCOMP+CAN 10.0 A
TTG1/23952 UCOMP+CAN 12.0 A
TPG1/83954 UCOMP+CAN 3.0 (s) A
TPG5/324636 UCOMPOSITE 4.0 (m) A
TPG3/163955 UCOMP+CAN 5.0 (s) A
United Plate Glass of Maryland LLC ; Frederick, MDTTG3/167889 UCOMP+CAN 5.0 A
TTG1/47890 UCOMP+CAN 6.0 A
TTG3/87891 UCOMP+CAN 10.0 A
TTG1/27892 UCOMP+CAN 12.0 A
Unitex Glass Chengdu Co., Ltd ; Chendu, Sichuan, ChinaTTG1/85462 UCOMP+CAN 3.0 A
TTG5/325463 UCOMP+CAN 4.0 A
TTG3/165407 UCOMP+CAN 5.0 A
TTG1/45408 UCOMP+CAN 6.0 A
TTG5/166519 UCOMP+CAN 8.0 A
TTG3/85414 UCOMP+CAN 10.0 A
TTG1/26520 UCOMP+CAN 12.0 A
Upstate Glass Tempering Inc. ; Middletown, NYTTG1/84926 UCOMPOSITE 3.0 A
TTG1/45157 UCOMPOSITE 6.0 A
TTG3/84927 UCOMPOSITE 10.0 A
TTG1/25158 UCOMPOSITE 12.0 A
TTG5/86743 UCOMPOSITE 16.0 (IN) A
US Glass Company ; Philadelphia, PATTG5/327692 UCOMPOSITE 4.0 A
TTG3/167693 UCOMPOSITE 5.0 A
TTG1/47660 UCOMPOSITE 6.0 A
TTG3/87661 UCOMPOSITE 10.0 A
TTG1/27662 UCOMPOSITE 12.0 A
TTG*7864 UCOMPOSITE 15.0 (4) A
TTG3/47865 UCOMPOSITE 19.0 A
TBG*7821 UCOMPOSITE 5.0 (4)(IN) A
TBG1/47822 UCOMPOSITE 6.0 (IN) A
TBG3/87823 UCOMPOSITE 10.0 (IN) A
TBG1/27824 UCOMPOSITE 12.0 (IN) A
LTG(H)7866 UCOMPOSITE 8-16+ (b)(A) A(.015)
US Glass Tempering Inc. ; San Leandro, CATTG1/87156 UCOMPOSITE 3.0 A
TTG5/327158 UCOMPOSITE 4.0 A
TTG3/167159 UCOMPOSITE 5.0 A
TTG1/47157 UCOMPOSITE 6.0 A
TTG3/87160 UCOMPOSITE 10.0 A
TTG1/27161 UCOMPOSITE 12.0 A
TPG3/87996 UCOMPOSITE 10.0 (s) A
Valentini Glass & Components srl ; Brescia, ItalyTTG5/322423 UCOMPOSITE 4.0 A
TTG3/167825 UCOMPOSITE 5.0 A
TTG1/26816 UCOMPOSITE 12.0 A
TBG5/324246 UCOMPOSITE 4.0 A
TBG3/167826 UCOMPOSITE 5.0 A
TBG1/42898 UCOMPOSITE 6.0 A
Vanbo Glass Industries Inc. ; Surrey, BCTTG1/48068 UCOMP+CAN 6.0 A
TTG1/28069 UCOMP+CAN 12.0 A
Velocity an Apogee Company ; Dallas, TXTTG3/167650 UCOMP+CAN 5.0 A
TTG1/47651 UCOMP+CAN 6.0 A
Vetreria F. Illi Paci S.R.L. ; Seregno MB ItalyTTG1/48105 UCOMPOSITE 6.0 A
TTG5/167855 UCOMPOSITE 8.0 A
TTG3/87856 UCOMPOSITE 10.0 A
TTG1/27857 UCOMPOSITE 12.0 A
LTG(H)7854 UCOMPOSITE 10-12 (ev)(A) A(.030)Vetrodomus SpA ; Brescia, Italy
TTG1/47492 UCOMPOSITE 6.0 A
TTG5/167493 UCOMPOSITE 8.0 A
TTG3/87494 UCOMPOSITE 10.0 A
LTG(H)7495 UCOMPOSITE 8,10 (b)(A) A(.030)Vidrio Bisel S.A. de C.V. (Santa Catarina) ; Monterrey, Nuevo Leon, Mexico
TTG1/44966 UCOMP+CAN 6.0 A
TTG3/84967 UCOMP+CAN 10.0 A
Vidrio Plano De Mexico S.A. DE C.V. ; Garcia Nuevo Leon, Nuevo Leon
TTG1/87735 UCOMP+CAN 3.0 A
View Inc. ; Olive Branch, MSTTG1/84725 UCOMPOSITE 3.0 A
TTG5/324726 UCOMPOSITE 4.0 A
TTG3/167961 UCOMPOSITE 5.0 A
TTG1/44728 UCOMPOSITE 6.0 A
TTG5/167107 UCOMPOSITE 8.0 A
TTG3/87108 UCOMPOSITE 10.0 A
LTG(S)6390 UCOMPOSITE 6 (b)(A) A(.030)LTG(H)8217 UCOMPOSITE 8 (ip)(A) A(.060)LTG(H)7711 UCOMPOSITE 8 (b)(A) A(.030)
Viewrail ; Goshen, INTTG1/27607 UCOMP+CAN 12.0 A
Page 70
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Viracon Inc. ; Owatonna, MNTTG5/324354 UCOMP+CAN 4.0 A
TTG3/161403 UCOMP+CAN 5.0 A
TTG1/41404 UCOMP+CAN 6.0 A
TTG5/163689 UCOMP+CAN 8.0 A
TTG3/81508 UCOMP+CAN 10.0 A
TTG1/21509 UCOMP+CAN 12.0 A
LTG(S)1637 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)4249 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4250 UCOMP+CAN 12-16+ (ip)(A) A(.060)
Viracon Inc. ; Statesboro, GATTG3/162314 UCOMP+CAN 5.0 A
TTG1/42310 UCOMP+CAN 6.0 A
TTG5/164720 UCOMP+CAN 8.0 A
TTG3/82311 UCOMP+CAN 10.0 A
LTG1/47591 UCOMP+CAN 6.0 (b)(A) A(.030)LTG(H)4779 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)4784 UCOMP+CAN 12 (ip)(A) A(.090)
Virginia Glass Products Corp. ; Ridgeway, VATTG3/1612 UCOMPOSITE 5.0 (IN) A
TTG1/414 UCOMPOSITE 6.0 A
TTG5/168116 UCOMP+CAN 8.0 A
TTG3/893 UCOMPOSITE 10.0 A
TTG1/294 UCOMPOSITE 12.0 A
TTG5/82182 UCOMPOSITE 16.0 A
TTG3/495 UCOMPOSITE 19.0 A
LTG(S)7989 UCOMPOSITE 6 (A)(b) A(.030)LTG(H)7990 UCOMPOSITE 8-16+ (A)(b) A(.030)LTG(H)5194 UCOMPOSITE 10-16+ (ip)(A) A(.035)
Vistamatic, LLC ; Coral Springs, FLTTG5/326535 UCOMPOSITE 4.0 A
TTG3/166536 UCOMPOSITE 5.0 A
TTG1/46537 UCOMPOSITE 6.0 A
TTG3/86538 UCOMPOSITE 10.0 A
TTG1/26539 UCOMPOSITE 12.0 A
Vitelsa Mosquera ; Bogota, Cundinamarca, ColumbiaTTG3/87719 UCOMPOSITE 10.0 A
TTG1/27401 UCOMPOSITE 12.0 A
LTG(H)6865 UCOMPOSITE 8-12 (b)(A) A(.030)LTG(H)6866 UCOMPOSITE 8-16+ (ip)(A) A(.035)
Vitemex ; Reynosa, Tamaulipas MexicoTTG1/45393 UCOMP+CAN 6.0 A
TTG3/85394 UCOMP+CAN 10.0 A
TTG1/25395 UCOMP+CAN 12.0 A
Vitralum Glass Solutions Inc. ; Altamonte Springs, FLTTG3/87853 UCOMPOSITE 10.0 A
TTG1/28107 UCOMPOSITE 12.0 A
Vitro Architectural Glass ; Barrie, ONTTG1/85207 UCOMP+CAN 3.0 A
TTG5/325204 UCOMP+CAN 4.0 A
TTG3/165205 UCOMP+CAN 5.0 A
TTG1/45206 UCOMP+CAN 6.0 A
TPG5/327083 UCOMP+CAN 4.0 (m) A
Vitro Flat Glass, LLC ; Carlisle, PATTG1/8250 UCOMP+CAN 3.0 A
TTG5/32675 UCOMP+CAN 4.0 A
TTG3/16249 UCOMP+CAN 5.0 A
TTG1/4382 UCOMP+CAN 6.0 A
Vitro Flat Glass, LLC ; Wichita Falls, TXTTG1/81110 UCOMP+CAN 3.0 A
TTG5/321111 UCOMP+CAN 4.0 A
TTG3/161112 UCOMP+CAN 5.0 A
TTG1/41113 UCOMP+CAN 6.0 A
TTG5/163577 UCOMP+CAN 8.0 A
TTG3/83578 UCOMP+CAN 10.0 A
Vitrum Industries Ltd. ; Langley, BCTTG1/87723 UCOMP+CAN 3.0 A
TTG5/327118 UCOMP+CAN 4.0 A
TTG3/167119 UCOMP+CAN 5.0 A
TTG1/47117 UCOMP+CAN 6.0 A
TTG5/167120 UCOMP+CAN 8.0 A
TTG3/88291 UCOMP+CAN 10.0 A
TTG1/27122 UCOMP+CAN 12.0 A
TTG5/88292 UCOMP+CAN 16.0 A
TTG3/47381 UCOMP+CAN 19.0 A
TPG1/87720 UCOMP+CAN 3.0 (s) A
TPG5/327721 UCOMP+CAN 4.0 (m) A
TPG3/167722 UCOMP+CAN 5.0 (m) A
TPG1/47790 UCOMP+CAN 6.0 (m) A
TBG1/48022 UCOMP+CAN 6.0 A
TBG3/87777 UCOMP+CAN 10.0 A
TBG1/27699 UCOMP+CAN 12.0 A
LTG(S)7871 UCOMP+CAN 6 (b)(A) A(.030)LTG(S)7725 UCOMP+CAN 6 (ip)(A) A(.035)LTG(H)7124 UCOMP+CAN 8-16+ (b)(A) A(.030)LTG(H)7726 UCOMP+CAN 8-16+ (ip)(A) A(.035)
Vitrum Industries Ltd. ; Rocky View County (Calgary)TTG5/327530 UCOMP+CAN 4.0 A
TTG3/167531 UCOMP+CAN 5.0 A
TTG1/47532 UCOMP+CAN 6.0 A
TTG5/167533 UCOMP+CAN 8.0 A
TTG3/87534 UCOMP+CAN 10.0 A
TTG1/27535 UCOMP+CAN 12.0 A
LSP(H)8284 UCOMP+CAN 12 (b)(A) A(.030)X2Viwinco, Inc. ; Morgantown, PA
TTG1/83074 UCOMPOSITE 3.0 A
TTG3/163405 UCOMPOSITE 5.0 A
TPG1/86803 UCOMPOSITE 3.0 (s) A
LTG(H)6374 UCOMPOSITE 8-12 (ip)(A) A(.090)LTG(H)3408 UCOMPOSITE 8 (b)(A) A(.090)
W. A. Wilson Inc. ; Wheeling, WVTTG1/84169 UCOMPOSITE 3.0 A
TTG3/164170 UCOMPOSITE 5.0 A
TTG1/44171 UCOMPOSITE 6.0 A
TTG5/168059 UCOMPOSITE 8.0 A
TTG3/84172 UCOMPOSITE 10.0 A
TTG1/24173 UCOMPOSITE 12.0 A
TPG1/85173 UCOMPOSITE 3.0 (d) A
TPG3/164175 UCOMPOSITE 5.0 (d) A
TPG3/84176 UCOMPOSITE 10.0 (s) A
Page 71
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
W.C.P., Inc dba West Coast Insulated Glass Products ; Cerritos, CA
TTG1/86084 UCOMP+CAN 3.0 A
TTG5/326085 UCOMP+CAN 4.0 A
TTG3/166086 UCOMP+CAN 5.0 A
TTG1/46087 UCOMP+CAN 6.0 A
TTG5/168181 UCOMP+CAN 8.0 A
TTG3/87075 UCOMP+CAN 10.0 A
TTG1/27076 UCOMP+CAN 12.0 A
TPG1/86088 UCOMP+CAN 3.0 (s) A
TPG5/326089 UCOMP+CAN 4.0 (m) A
TPG3/166090 UCOMP+CAN 5.0 (d) A
LTG(S)8014 UCOMP+CAN 6 (ip)(A) A(.035)LTG(S) 6091 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7077 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)6092 UCOMP+CAN 8-16+ (b)(A) A(.030)
Wexford Viking Glass Limited ; Wexford,TTG1/48287 UCOMPOSITE 6.0 A
Whalley Glass Co ; Derby, CTTTG1/86226 UCOMPOSITE 3.0 A
TTG3/166227 UCOMPOSITE 5.0 A
TTG1/46228 UCOMPOSITE 6.0 A
TTG3/86229 UCOMPOSITE 10.0 A
White Aluminum Enterprises LLC ; Abu Dhabi, United Arab Emirates
TTG5/327085 UCOMPOSITE 4.0 A
TTG1/44598 UCOMPOSITE 6.0 A
TTG5/164597 UCOMPOSITE 8.0 A
TTG3/87477 UCOMPOSITE 10.0 A
LTG(H)7260 UCOMPOSITE 8-16+ (b)(T) A(.030)LTG(H)7237 UCOMPOSITE 8-16+ (ip)(T) A(.035)
Wholesale Glass Dist. ; Memphis, TNTTG1/87703 UCOMPOSITE 3.0 A
TTG3/164379 UCOMPOSITE 5.0 A
TTG1/44380 UCOMPOSITE 6.0 A
TTG3/84381 UCOMPOSITE 10.0 A
TTG1/24382 UCOMPOSITE 12.0 A
WHTB Glass, LLC ; Shirley, NYTTG3/167741 UCOMP+CAN 5.0 A
TTG1/47742 UCOMP+CAN 6.0 A
TTG5/167743 UCOMP+CAN 8.0 A
TTG3/87744 UCOMP+CAN 10.0 A
TTG1/27745 UCOMP+CAN 12.0 A
TTG3/47746 UCOMP+CAN 19.0 A
LTG(H)7747 UCOMP+CAN 10-16+ (b)(A) A(.030)LTG(H)8223 UCOMP+CAN 10 (ip)(A) A(.035)
Window Creations, LLC ; Fort Jennings, OHTTG3/168127 UCOMP+CAN 5.0 A
TTG1/48128 UCOMP+CAN 6.0 A
TTG3/88129 UCOMP+CAN 10.0 A
TTG1/28130 UCOMP+CAN 12.0 A
WinTech ; Monett, MOTTG1/86433 UCOMP+CAN 3.0 A
TTG1/46434 UCOMP+CAN 6.0 A
Wisconsin Shower Door & Supply Corp ; Menomonee Falls, WI
TTG1/85585 UCOMPOSITE 3.0 A
TTG3/165587 UCOMPOSITE 5.0 A
TTG1/45588 UCOMPOSITE 6.0 A
TTG3/85589 UCOMPOSITE 10.0 A
TTG1/25590 UCOMPOSITE 12.0 A
TPG1/85592 UCOMPOSITE 3.0 (s) A
TPG3/165594 UCOMPOSITE 5.0 (s) A
TPG1/45595 UCOMPOSITE 6.0 (m) A
TPG3/85596 UCOMPOSITE 10.0 (m) A
TPG1/25597 UCOMPOSITE 12.0 (m) A
Wolverine Glass Products, Inc. ; Wyoming, MITTG1/88036 UCOMP+CAN 3.0 A
TTG5/327981 UCOMP+CAN 4.0 A
TTG3/167982 UCOMP+CAN 5.0 A
TTG1/48037 UCOMP+CAN 6.0 A
TTG5/167983 UCOMP+CAN 8.0 A
TTG3/87984 UCOMP+CAN 10.0 A
TTG1/27985 UCOMP+CAN 12.0 A
TPG1/87986 UCOMP+CAN 3.0 (m) A
TPG5/327987 UCOMP+CAN 4.0 (d) A
Woodbridge Glass Distribution Inc. ; Concord, OntarioTTG1/87896 UCOMP+CAN 3.0 A
TTG5/327897 UCOMP+CAN 4.0 A
TTG3/167898 UCOMP+CAN 5.0 A
TTG1/47899 UCOMP+CAN 6.0 A
TTG5/167900 UCOMP+CAN 8.0 A
TTG3/87901 UCOMP+CAN 10.0 A
TTG1/27902 UCOMP+CAN 12.0 A
TPG5/327903 UCOMP+CAN 4.0 (m) A
TPG3/167904 UCOMP+CAN 5.0 (s) A
TPG3/87905 UCOMP+CAN 10.0 (s) A
Woon-Tech Inc. ; Whitinsville, MATTG1/86364 UCOMP+CAN 3.0 A
TTG5/326365 UCOMP+CAN 4.0 A
TTG3/166366 UCOMP+CAN 5.0 A
TTG1/46367 UCOMP+CAN 6.0 A
TTG3/86368 UCOMP+CAN 10.0 A
TTG1/26369 UCOMP+CAN 12.0 A
TTG5/86370 UCOMP+CAN 16.0 A
TTG3/46371 UCOMP+CAN 19.0 A
WSD Glass, Inc. ; Winston-Salem, NCTTG3/164048 UCOMPOSITE 5.0 A
TTG1/44049 UCOMPOSITE 6.0 A
TTG3/84052 UCOMPOSITE 10.0 A
TTG1/24050 UCOMPOSITE 12.0 A
Wujiang CSG Huadong Architectural Glass Co., LTD ; Wujiang, Jiangsu, China
TTG3/166784 UCOMPOSITE 5.0 A
TTG1/46785 UCOMPOSITE 6.0 A
TTG5/166786 UCOMPOSITE 8.0 A
TTG3/86787 UCOMPOSITE 10.0 A
TTG1/26788 UCOMPOSITE 12.0 A
TTG*6789 UCOMPOSITE 15.0 (4) A
LTG(H)6790 UCOMPOSITE 10-16+ (b)(A) A(.030)
Page 72
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Wujiang Golden Glass Technologies, Ltd. ; Wujiang City, China
TTG1/45251 UCOMP+CAN 6.0 A
TTG5/165252 UCOMP+CAN 8.0 A
TTG3/85253 UCOMP+CAN 10.0 A
TTG1/25254 UCOMP+CAN 12.0 A
TTG*5255 UCOMP+CAN 15.0 (4) A
TTG3/45256 UCOMP+CAN 19.0 A
LTG(H)5257 UCOMP+CAN 8 (b)(A) A(.030)LTG(H)5258 UCOMP+CAN 10 (ip)(A) A(.035)
Xiamen Shiner Industrial Co., Ltd. ; Xiamen, FujianTTG3/167948 UCOMP+CAN 5.0 A
TTG1/47949 UCOMP+CAN 6.0 A
TTG3/87950 UCOMP+CAN 10.0 A
Xiamen Togen Building Products Co., Ltd. ; Fujian, ChinaTTG3/87963 UCOMPOSITE 10.0 A
TTG1/27964 UCOMPOSITE 12.0 A
LTG(H)7966 UCOMPOSITE 12 (b)(A) A(.060)LTG(H)7965 UCOMPOSITE 16+ (ip)(A) A(.035)
Xianning CSG Energy Conservation Glass Co., LTD. ; Xianning, Hubei, China
TTG3/165979 UCOMP+CAN 5.0 A
TTG1/46004 UCOMP+CAN 6.0 A
TTG5/166005 UCOMP+CAN 8.0 A
TTG3/85980 UCOMP+CAN 10.0 A
TTG*5981 UCOMP+CAN 12.0 (4) A
TTG*5982 UCOMP+CAN 15.0 (4) A
TTG3/45983 UCOMP+CAN 19.0 A
LTG(H)7867 UCOMP+CAN 10 (b)(T) A(.030)Xinyi Glass (Tianjin) Co. Ltd. ; Tianjin, China
TTG3/165532 UCOMP+CAN 5.0 A
TTG1/45533 UCOMP+CAN 6.0 A
TTG5/165534 UCOMP+CAN 8.0 A
TTG3/85535 UCOMP+CAN 10.0 A
TTG1/25536 UCOMP+CAN 12.0 A
TTG*6329 UCOMP+CAN 15.0 (4) A
LTG(S)5538 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)5539 UCOMP+CAN 8-16+ (b)(A) A(.030)
Xinyi Glass (Yingkou) Co., Ltd. ; Liaoning, ChinaTTG1/46848 UCOMP+CAN 6.0 A
TTG5/166849 UCOMP+CAN 8.0 A
TTG3/86850 UCOMP+CAN 10.0 A
TTG*6851 UCOMP+CAN 12.0 (3) A
LTG(S)7373 UCOMP+CAN 6 (b)(A) B(.015)LTG(S)6852 UCOMP+CAN 6 (b)(A) A(.030)LTG(H)7841 UCOMP+CAN 8-12 (b)(A) B(.015)LTG(H)7842 UCOMP+CAN 8-16+ (ip)(A) A(.035)LTG(H)6853 UCOMP+CAN 8-16+ (b)(A) A(.030)
Xinyi Group (Glass) Co., Ltd. ; Dongguan, Guangdong, China
TTG3/163085 UCOMP+CAN 5.0 A
TTG1/43053 UCOMP+CAN 6.0 A
TTG5/164648 UCOMP+CAN 8.0 A
TTG3/83054 UCOMP+CAN 10.0 A
TTG*3055 UCOMP+CAN 12.0 (4) A
TTG*4179 UCOMP+CAN 15.0 (4) A
LTG(H)3489 UCOMP+CAN 10-16+ (b)(A) A(.030)Yakut Cam A.S ; Istanbul, Sancaktepe
TTG1/47957 UCOMP+CAN 6.0 A
TTG5/167958 UCOMP+CAN 8.0 A
TTG3/87959 UCOMP+CAN 10.0 A
TTG1/27960 UCOMP+CAN 12.0 A
LTG(H)8092 UCOMP+CAN 10-16+ (b)(A) A(.030)Yantai Bluesky Glass Co., Ltd ; Yantai City, Shandong
TTG5/328288 UCOMPOSITE 4.0 A
TTG1/48289 UCOMPOSITE 6.0 A
TTG3/88290 UCOMPOSITE 10.0 A
Yantai Dongfang Glass Co., Ltd ; Yantai, ShandongTTG3/168234 UCOMP+CAN 5.0 A
TTG1/48235 UCOMP+CAN 6.0 A
TTG3/88236 UCOMP+CAN 10.0 A
Yao Xiang Glass Product Co. Ltd. ; Foshan, Guangdong, China
TTG5/323736 UCOMP+CAN 4.0 A
TTG3/163737 UCOMP+CAN 5.0 A
TTG1/43738 UCOMP+CAN 6.0 A
TTG5/163739 UCOMP+CAN 8.0 A
TTG3/83740 UCOMP+CAN 10.0 A
TTG1/23741 UCOMP+CAN 12.0 A
TBG3/163742 UCOMP+CAN 5.0 A
TBG1/43743 UCOMP+CAN 6.0 A
Yildiz Cam San. Tic. A.S. ; Istanbul, UmraniyeTTG3/87923 UCOMPOSITE 10.0 A
TTG1/27924 UCOMPOSITE 12.0 A
LTG(H)7925 UCOMPOSITE 10-16+ (b)(A) A(.030)Yitian (Cattis) Glass Product Co., Ltd ; Foshan, Guangdong, China
TTG3/166452 UCOMP+CAN 5.0 A
TTG1/46453 UCOMP+CAN 6.0 A
TTG5/166454 UCOMP+CAN 8.0 A
TTG3/86455 UCOMP+CAN 10.0 A
TBG3/166456 UCOMP+CAN 5.0 A
TBG1/46457 UCOMP+CAN 6.0 A
TBG5/166458 UCOMP+CAN 8.0 A
Page 73
SGCC# INCHES TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
Certified Products-Alphabetical By Plant
SGCC# TYPE
MAX SIZE
CERTIFIEDTEST STD (MM)
July 2021
ANSI
CLASS
ANSI
CLASS
(THICKNESS
CLASS)
(THICKNESS
CLASS)
INCHES
Yong Feng Tai Foshan City Glass Co., LTD. ; Foshan, Guangdong, China
TTG5/326877 UCOMP+CAN 4.0 A
TTG3/165890 UCOMP+CAN 5.0 A
TTG1/45891 UCOMP+CAN 6.0 A
TTG5/165892 UCOMP+CAN 8.0 A
TTG3/85893 UCOMP+CAN 10.0 A
TPG3/166878 UCOMP+CAN 5.0 (m) A
TBG3/167066 UCOMP+CAN 5.0 A
TBG1/45894 UCOMP+CAN 6.0 A
TBG5/166879 UCOMP+CAN 8.0 A
Zhangjiagang City Daming Glass Product Co., Ltd ; Zhangjiagang City, Jiangsu
TTG5/165464 UCOMP+CAN 8.0 A
TTG3/85465 UCOMP+CAN 10.0 A
TTG1/25466 UCOMP+CAN 12.0 A
LTG(H)7048 UCOMP+CAN 8-10 (ip)(A) A(.035)Zhangjiagang Weiyu Fabricated Glassware Co. Ltd. ; Zhangjiagang, Jiangsu, China
TTG1/85737 UCOMP+CAN 3.0 A
TTG5/325738 UCOMP+CAN 4.0 A
TTG3/165739 UCOMP+CAN 5.0 A
TTG1/45740 UCOMP+CAN 6.0 A
TTG5/167141 UCOMP+CAN 8.0 A
TTG3/87142 UCOMP+CAN 10.0 A
Zhejiang Zhongli Energy Efficient Glass Mfg. Co., Ltd ; Hangzhou, Zhejiang, China
TTG3/165077 UCOMP+CAN 5.0 A
TTG1/45078 UCOMP+CAN 6.0 A
TTG5/165079 UCOMP+CAN 8.0 A
TTG3/85080 UCOMP+CAN 10.0 A
LTG(H)6051 UCOMP+CAN 10 (b)(A) A(.030)Zhongshan Walle Glass Product Co., Ltd ; Zhongshan City, Guangdong Province
TTG1/48142 UCOMPOSITE 6.0 A
TTG5/168143 UCOMPOSITE 8.0 A
TTG3/88144 UCOMPOSITE 10.0 A
Page 74
Certified Products-Alphabetical By Plant
July 2021
CERTIFIED PRODUCTS KEY
TTG TEMPERED TRANSPARENT GLASS
Glass Product Type Codes
TPG TEMPERED PATTERNED GLASS
TBG TEMPERED BENT GLASS
TBP TEMPERED BENT PATTERNED GLASS
LTG LAMINATED TRANSPARENT GLASS
LSP LAMINATED SPECIALTY PRODUCTS
OCG ORGANIC COATED GLASS
OCH ORGANIC COATED GLASS HYBRID
SPS SAFETY PLASTIC SHEET
U UNLIMITED SIZE CATEGORY
Glass Standard Attribute Codes
A ANSI STANDARD - DROP HEIGHT CLASS - 48 INCH DROP
B ANSI STANDARD - DROP HEIGHT CLASS - 18 INCH DROP
(S) STANDARD THICKNESS CLASS FOR LAMINATED GLASS
(H) HEAVY THICKNESS CLASS FOR LAMINATED GLASS
(2) CONFORMS TO EN 572-7 THICKNESS TOLERANCES FOR BENT/CHANNEL GLASS
(3) CONFORMS TO EN 572-2 THICKNESS TOLERANCES FOR TEMPERED GLASS
(4) CONFORMS TO EN 12150 THICKNESS TOLERANCES FOR TEMPERED GLASS
(5) CONFORMS TO EN 572-5 THICKNESS TOLERANCES FOR PATTERNED GLASS
(6) INDOOR USE ONLY
(7) CONFORMS TO JIS 3202:2011 THICKNESS TOLERANCES FOR TEMPERED GLASS
(c1) CPSC CAT 1 ONLY
(s) SHALLOW PATTERN
Pattern Glass Attribute Codes
(m) MEDIUM PATTERN
(d) DEEP PATTERN
Laminated Glass Attribute Codes
(A) ANNEALED
(HS) HEAT STRENGTHENED
(T) TEMPERED
(b) POLY VINYL BUTRAL INTERLAYER
(el) EPOXY LIQUID CRYSTAL POLYMER
(ip) IONOMER
(lc) LIQUID RESIN - MULTI COMPONENT
(lu) LIQUID RESIN - UV CURE
(p) POLYETHYLENE TEREPHTHALATE
(f) FLUORINATED ETHYLENE PROPYLENE INTERLAYER
(u) POLYURETHANE
(ev) ETHYLENE-VINYL ACETATE
(IN) INACTIVE (Products bearing this designation have executed a Test Release Bond waiving testing for this certification period due to inactive production)
Miscellaneous Codes
(*) INDICATES EN STANDARD THICKNESS TOLERANCE
VIGT VACUUM INSULATING GLASS TEMPERED
VIGL VACUUM INSULATING GLASS LAMINATED
VITL VACUUM INSULATING GLASS TEMPERED LAMINATED
(CS) CHEMICALLY STRENGTHENED
CSSG CHEMICALLY STRENGTHENED SAFETY GLASS
Page 75
SD-100 July 2021
S (Shallow)M (Medium)D (Deep)X (Pattern available but pattern depth not yet classified.)*Indicates EN Standard Thickness Tolerance
Pattern Name Manufacturer1/8 5/32 3/16 n/a 7/32 1/4 n/a 5/16 3/8 1/2 5/8 3/43 4 5 0.21 5.5 6 7 8 10 12 16 19
Abstracto Saint Gobain DAltdeutsch F Saint Gobain SAltdeutsch K Saint Gobain S
Antique Saint Gobain SAqua AGC S S S S
Aqualite Qingdao Jing Jing SAquatex AGC S S S S S S
Aqui AGC S S S S SArctic* Pilkington D
Arena C/SR Arena Saint Gobain S S S SAustral* Pilkington DAutumn Saint Gobain SAutumn* Pilkington M XBamboo AGC DBamboo Guardian SBamboo Shixing M SBubble Guardian S S S S S S
Cascade AGC S SCast Saint Gobain S
Chantilly* Pilkington SCharcoal Sticks* Pilkington S
Chinchilla AGC S S SCitrus AGC S S S
Contora* Pilkington SCotswold* Pilkington M X
Cross Reeded AGC D MDelta AGC D M
Digital* PilkingtonEsto Guardian M M M
Estriado/SR Estr Saint Gobain M MEtre Guardian S S S S
Everglade* Pilkington M XFlax AGC M M, S S S S
Flemish* Pilkington S MFloralite Guardian MFlorex AGC M M
Florielle* Pilkington SFlutes AGC M D DFlutex AGC D MGlacier AGC M M D D M
Gluechip Guardian M M M M MGround Glass AGC S S S S
Hammered AGC S S S SIllusions AGC S S S S
Ima Guardian M M MIndustrex AGC S S S S S S
Kathedral Klein AGC S S S SKathedral Max Saint Gobain S S SKathedral Min Saint Gobain S
Konfeta AGC MKrystal Flutes AGC D
Krystal Illusions AGC S S S SKrystal Industrex AGC S S S S SKrystal Serenity AGC S S S SKrystal Storm AGC S S S SLaliva weiss Saint Gobain S
Leaf AGC MListral A Saint Gobain S
inchesmm
Thickness & Pattern Depth
Classified Tempered Glass Patterns Key (SD-100)
Page 76
SD-100 July 2021
Pattern Name Manufacturer1/8 5/32 3/16 n/a 7/32 1/4 n/a 5/16 3/8 1/2 5/8 3/43 4 5 0.21 5.5 6 7 8 10 12 16 19
inchesmm
Thickness & Pattern Depth
Listral D Saint Gobain MListral F Saint Gobain MListral K Saint Gobain SListral M Saint Gobain DLozenge Pilkington DMadera Saint Gobain DMaris Saint Gobain M
Master-Carre Saint Gobain MMaster-Carre Saint Gobain M M M M
Master-Lens w Saint Gobain D D DMaster-Ligne Saint Gobain M M MMaster-Point Saint Gobain M M MMaster-Ray Saint Gobain D D D
Master-Shine Saint Gobain M M M MMayflower* Pilkington S
Minster* Pilkington SMistlite Jinjing S S S
Monumental M Saint Gobain DMonumental S Saint Gobain M
Morisco* Pilkington MNiagara Guardian M M M M M M M
Oak* Pilkington SOptica Saint Gobain MP-516 Guardian S S S S S S S S
Pattern 62 AGC S S S S SPattern 73 AGC M MPebbles AGC M MPelerine* Pilkington SPinhead Taiwan Glass S S SPixels AGC MRain AGC M M M S S S
Rattan* Pilkington MRayado* Pilkington S
Reed Saint Gobain MReeded* Pilkington D M MSahara Saint Gobain SSateen Skyline Design S S S S S S S
Seashell AGC M MSerenity AGC S S S S
Silvit Saint Gobain D D DSkytex AGC SSolatex AGC S S SSolite AGC S S S
Sparkel* Pilkington DSpotlyte Saint Gobain DSpraylite Guardian S S S S S S S
SR Listral L Saint Gobain S S SStippolite* Pilkington S X X
Storm AGC S S S SSunadex AGC S
Sycamore* Pilkington S XTaffeta* Pilkington S
Tetra Guardian MTextured Flutex AGC D D M
Thela Saint Gobain S S SVelvex AGC S S S S SVison Saint Gobain S S S
Warwick* Pilkington SWaterdrop Saint Gobain M
Yacare* Pilkington M
Page 77
(b) Poly Vinyl Butral (lu) Liquid Resin - UV Cure
(f) Fluorinated Ethylene Propylene
(lc) Liquid Resin-Multi Component(p) Polyethylene Terephthalate
(ev) Ethylene-Vinyl Acetate
(ip) Ionoplast(el) Epoxy-Liquid Crystal Polymer
(u) Polyurethane (su) Solid resin UV cure
Generic Code
Description Supplier Interlayer Brand Interlayer FormulationsWeathering Data on file
(b) Poly Vinyl Butral Eastman Chemical Company Saflex IIIG/VancevaSeries A, C, D, F, H, M, N, P, R, S, W
Eastman Chemical Company Saflex Specialty Saflex Q, AG, DB/DS Eastman Chemical Company Saflex Composite Saflex V, K series Kuraray Trosifol SentryGlas Expressions
Kuraray Trosifol (formerly Butacite B50-B56) Clear (B500)
Kuraray Trosifol (formerly BG) Clear/Ultra Clear (B100)
Kuraray Trosifol (formerly ES) Extra Stiff (B130) Kuraray Trosifol (formerly SC) SC Monolayer (B100) Kuraray Trosifol (formerly XT90) XT (B140) Kuraray Trosifol Solar R40 (B900) Kuraray Trosifol HR100 (B170) Chang Chun Winlite (0.015)
Sekisui S-Lec America LLCSekisui S-LEC Film & Sekisui S-LEC Acoustic Film
(0.030)
Everlam S.A. EVERLAM™ NC 010, LAM52 (0.015) Everlam N.V. EVERLAM™ SUPER TOUGH LAM72T Kingboard (FO Gang) Specialty Resins Ltd.
Kingboard (0.015)
Zhejiang Decent New Material Co., Ltd.
Architectural PVB (0.030)
(u) Polyurethane SWM International ArgoBond® ST-6050 (0.050)
(ip) Ionoplast Kuraray Trosifol SentryGlas® (0.035) Kuraray Trosifol SentryGlas® Xtra™ (0.035)
(lu) Liquid Resin - UV Cure Bestroom Co. Ltd. UVLAM (0.040) H.B. Fuller- Kommerling Kodilan GS-LED (.040) ALLNEX UVEKOL (0.040)
(ev) Ethylene-Vinyl Acetate Interlayer Solutions, inc. EVALAYER (0.015)
Folienwerk Wolfen GmbHEvguard® - UV380, Polar White, Milky White
(0.015)
Hornos Industriales Pujol, S.A. EVALAM Crystal (0.015)
Hornos Industriales Pujol, S.A. EVALAM Visual (0.015)
RCN Solution SRL REVA BF (0.015)
IGE Supply Solutions, Inc.SHENZHEN OSTER FILM - ASQ1X Extra Clear EVA Film
(0.015)
SWM International ArgoBond® SE-381TF (0.030) Satinal SPA Strato (0.015) Shanghai HIUV New Materials Co., Ltd.
HIUV-PVE (0.015)
In order for a laminated glass product to become or remain SGCC Certified, the interlayer used by the manufacturer must be on this list. All interlayers must haveweathering test data on file. Outdoor use may be tested to ANSI Z97.1-2009 or 2015 and Indoor use only must be tested to ANSI Z97.1-2015 weathering data.
Generic Code & Description
SGCC LIST OF ACCEPTED INTERLAYERS (SD-99)
L.1 Certification to one brand within the generic category will allow switching to other brands within the generic category on the list (see Laminated Glass Equivalency - Table L1 for guidance with Change Catergories, Equivalent/Not Equivalent Changes in accepted interlayers).
All interlayers must have weathering test data on file. Outdoor use may be tested to ANSI Z97.1-2009 or 2015 and Indoor use only must be tested to ANSI Z97.1-2015 weathering data. All Indoor use only products must submit Indoor Use Only Weathering requirements to ANSI Z97.1-2015 by 12/31/2016 to maintain approval on this list. Interlayer suppliers not providing weathering data to SGCC by 12/31/16, will no longer be available for manufacturers to use in SGCC certified products. (7/1/16)
78
(b) Poly Vinyl Butral (lu) Liquid Resin - UV Cure
(f) Fluorinated Ethylene Propylene
(lc) Liquid Resin-Multi Component(p) Polyethylene Terephthalate
(ev) Ethylene-Vinyl Acetate
(ip) Ionoplast(el) Epoxy-Liquid Crystal Polymer
(u) Polyurethane (su) Solid resin UV cure
Generic Code
Description Supplier Interlayer Brand Interlayer FormulationsWeathering Data on file
In order for a laminated glass product to become or remain SGCC Certified, the interlayer used by the manufacturer must be on this list. All interlayers must haveweathering test data on file. Outdoor use may be tested to ANSI Z97.1-2009 or 2015 and Indoor use only must be tested to ANSI Z97.1-2015 weathering data.
Generic Code & Description
SGCC LIST OF ACCEPTED INTERLAYERS (SD-99)
L.1 Certification to one brand within the generic category will allow switching to other brands within the generic category on the list (see Laminated Glass Equivalency - Table L1 for guidance with Change Catergories, Equivalent/Not Equivalent Changes in accepted interlayers).
All interlayers must have weathering test data on file. Outdoor use may be tested to ANSI Z97.1-2009 or 2015 and Indoor use only must be tested to ANSI Z97.1-2015 weathering data. All Indoor use only products must submit Indoor Use Only Weathering requirements to ANSI Z97.1-2015 by 12/31/2016 to maintain approval on this list. Interlayer suppliers not providing weathering data to SGCC by 12/31/16, will no longer be available for manufacturers to use in SGCC certified products. (7/1/16)
(ev)(p)Ethylene-Vinyl Acetate / Polyethylene Terephthalate
Folienwerk Wolfen GmbH Evguard®+ MPE (.015)(.008)(.015)
(el)(p)Epoxy-Liquid Crystal Polymer / Polyethylene Terephthalate
Polytronix, Inc. Polyvision Film (0.075)
(su) Solid resin UV cure Seeory Materials Corp Seeory Interlayer (0.030)
79
California
125 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 2524 East Jensen Ave.; Fresno, CA 93706Attn: Kenny White, Mr. Tyler Westerling, Ms. Marisela Saavedra, Ms. Shannon SteinPhone: (559) 233-8705 Fax: (559) 233-8360Email: [email protected], [email protected], [email protected], [email protected]
250 - Construction Consulting Laboratory Inc.Construction Consulting Laboratory Inc., Western Division, 4751 W State St Ste B; Ontario, CA 91762Attn: Mr. Jack Jackson, Mr. Chad JacksonPhone: (909) 591-1789 Fax: 9096279020Email: [email protected], [email protected]
Florida
285 - QAI Laboratories, Inc.QAI Laboratories, Inc., 8148 NW 74th Avenue; Medley, FL 33166Attn: Jose SanchezPhone: 1-305-885-3328 Fax: 1-305-885-3329Email: [email protected]
850 - PRI Construction Materials TechnologiesPRI Construction Materials Technologies, 6412 Badger Dr; Tampa, FL Attn: Mr. Brad Grzybowski, Tim EfawPhone: 813-621-5777 Fax: 813-621-5840Email: [email protected], [email protected]
Georgia
165 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 1701 Westfork Dr., Suite 106; Lithia Springs, GA 30122Attn: Mr. Brock, Austin Viness, Mr. James Blakely, Ms. Andrea TorreyPhone: (770) 941-6916 Fax: (770) 941-2930Email: [email protected], [email protected], [email protected]
Iowa
500 - Element Materials Technology Des MoinesElement Materials Technology Des Moines, 3922 Delaware Avenue; Des Moines, IA 50313Attn: Mr. Nathan Mracek, Adam Scarlett, Brian EscherichPhone: (515) 266-5101 Fax: (505) 262-1910Email: [email protected], [email protected], [email protected]
Minnesota
150 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 40 51st Way NE Suite 100; Fridley, MNAttn: Mr. Lukas Bayer, Mr. Dan Johnson, Ms. Wendy AllisonPhone: (651) 636-3835 Fax: (651) 636-3843Email: [email protected], [email protected], [email protected]
New York
400 - IntertekIntertek, 75 Clinton Avenue; Cortland, NYAttn: Mr. Russell Mantey, Mr. Matthew Small, James DiescherPhone: (607) 758-6673 Fax: (607) 758-6666Email: [email protected], [email protected], [email protected]
Ohio
200 - Bowser-Morner Inc.Bowser-Morner Inc., 4518 Taylorsville Rd; Dayton, OHAttn: Vicki ApporaPhone: (937) 236-8805 Fax: 9372379947Email: [email protected]
Pennsylvania
100 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 130 Derry Court; York, PA 17402-9405Attn: Mr. Todd Wilt, Thomas MickleyPhone: (717) 764-7700 Fax: (717) 764-4129Email: [email protected], [email protected]
SGCC® APPROVED TESTING LABORATORIES APPROVED FOR TESTING INTHE ANSI AND CAN/CGSB CERTIFICATION PROGRAMS (SD-101)
The ID of the Laboratory used for testing of each product is provided in the Certified Products "By Product Type" of this Certified ProductsDirectory. Please note: For initial certification of prototype samples, the manufacturer pays the laboratory directly for testing and must contactthe laboratory for prototype testing fees.
Tuesday, July 20, 2021
Page 80
Pennsylvania
103 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 1140 Lincoln Ave; Springdale, PA 15144Attn: Mr. Steve Shank, Mr. Jim Grippo, Mr. Mike Matovcik, Ms Sandy DiCaroPhone: 724-275-7100 Fax: 724-275-7102Email: [email protected], [email protected], [email protected], [email protected]
800 - National Certified Testing Labs (NCTL)National Certified Testing Labs (NCTL), 5 Leigh Drive; York, PAAttn: Mr. Justin Bupp, Drew KlinedinstPhone: (717) 846-1200 Fax: (717) 846-1200Email: [email protected], [email protected]
911 - Molimo, LLC.Molimo, LLC., 1410 Eden Road; York, PA 17402Attn: Mr. Lance Cunningham, Mr. Michael Stremmel, Mr. Steve EvelerPhone: 717-916-6300 Fax: 717-318-5788Email: [email protected], [email protected], [email protected]
Texas
175 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 1909 10th Street, Suite 100; Plano, TX 75074-8009Attn: Cassandra Matthews, Mr. Fred MunozPhone: (469) 814-0687 Fax: Email: [email protected], [email protected]
Washington
195 - Architectural Testing Inc. (an Intertek Company)Architectural Testing Inc. (an Intertek Company), 22155 68th Ave. South; Kent, WA 98032-1937Attn: Mrs. Patricia Cain, Ms. Jennifer LevinsPhone: (253) 395-5656 Fax: (253) 395-5657Email: [email protected], [email protected]
Washington
750 - National Certified Testing Labs (NCTL) NW - WANational Certified Testing Labs (NCTL) NW - WA, 3310 Hill Avenue; Everett, WAAttn: Amy Becker, Mr. Serge PaquetPhone: (425) 259-6799 Fax: (425) 259-4936Email: [email protected], [email protected]
CanadaQuebec
450 - IntertekIntertek, 1829 32nd Avenue; Lachine, QCAttn: Mr. Kal Kooner, Mr. Claude Pelland, Mr. Sergiu ToacaPhone: (514) 631-3100 Fax: Email: [email protected], [email protected], [email protected]
Canada British Columbia
950 - IntertekIntertek, 1500 Brigantine Dr. ; Coquitlam, BC Attn: Baldeep Sandhu, Mr. Chris ChangPhone: 604-520-3321 Fax: Email: [email protected], [email protected]
SGCC® APPROVED TESTING LABORATORIES APPROVED FOR TESTING INTHE ANSI AND CAN/CGSB CERTIFICATION PROGRAMS (SD-101)
The ID of the Laboratory used for testing of each product is provided in the Certified Products "By Product Type" of this Certified ProductsDirectory. Please note: For initial certification of prototype samples, the manufacturer pays the laboratory directly for testing and must contactthe laboratory for prototype testing fees.
Tuesday, July 20, 2021
Page 81