safety instructions - jay-tech · 1 . safety instructions. w. arning! t. o reduce the risk of fire,...
TRANSCRIPT
1
SAFETY INSTRUCTIONS
WARNING! TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR
SERIOUS PERSONAL INJURY:
This product shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on the apparatus.
Situate this product away from heat sources such as radiators, heat registers, stoves, or
other appliances (including amplifiers) that produce heat.
Clean the product only as recommended by the manufacturer (see “Maintenance”)
section for details). Unplug the power cord from the wall outlet before cleaning.
Unplug the power cord from the wall outlet when left unused for an extended period.
Prevent objects/liquids from falling or spilling on the product.
Operate the product only with the supplied power adapter. Route power cords so they
are not likely to be walked on or pinched by items placed upon or against them, paying
particular attention to plugs, convenience receptacles, and the point where they exit
from the product.
Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
Do not operate this product under the following conditions.
- When the power-supply cord or plug is damaged.
- If liquid has been spilled into or objects have fallen into the product.
- If the product has been exposed to rain or water.
- If the product does not operate when used according to the operating instructions.
- If the product has been dropped or damaged in any way.
Do not attempt to repair the product by yourself; take it to the electronics repair shop of
your choice for any servicing or repair.
Do not overload wall outlets, extension cords, or integral convenience receptacles.
IMPORTANT INSTRUCTIONS
2
CAUTION! TO REDUCE THE RISK OR PERSONAL INJURY OR
PRODUCT/PROPERTY DAMAGE:
This product is intended solely for non-commercial, non-industrial, personal use as a
television. Do not use this product for any other purpose.
Do not subject the product to violent shocks, extreme temperatures, or lengthy periods
or direct sunlight.
Keep the product away from magnetic objects, motors, and transformers.
Do not use outdoors in inclement weather.
Do not use the TV while driving; this is dangerous and is illegal in some areas.
BATTERY HANDLING AND USAGE:
Keep batteries away from children and pets. Only adults should handle batteries.
Never throw batteries into a fire or expose them to fire or other heat sources.
Follow the battery satiety and usage instructions provided by the manufacturer.
All the pictures in this manual are just for your reference, appearance and display should
subject to the final product.
At full volume, prolonged listening may damage the user’s
hearing.
3
TABLE OF CONTENTS
GETTING STARTED
IMPORTANT INSTRUCTIONS ......................................................................................... 1-2
FEATURES ......................................................................................................................... 4
GENERAL PARTS ............................................................................................................ 5-6
REMOTE CONTROL ........................................................................................................... 7
REMOTE CONTROL PREPARATION ................................................................................. 8
BASIC CONNECTION .................................................................................................... 9-13
OPERATIONS
BASIC OPERATIONS .................................................................................................. 14-19
MAIN MENU ................................................................................................................. 20-30
DTV MODE ............................................................................................................... 20-29
ATV AND OTHER MODES ............................................................................................ 30
PC MODE ...................................................................................................................... 30
FOR REFERENCE
MAINTENANCE ................................................................................................................ 31
SPECIFICATIONS ............................................................................................................. 31
WALL MOUNTING ............................................................................................................ 32
TROUBLESHOOTING ...................................................................................................... 33
4
81 cm (32") TFT DISPLAY This player has a built-in 81 cm (32”) TFT display to provide clear vision and low radiation.
AUTO TV SCANNING
DIGITAL BROADCASTING RECEPTION
EPG (Electric Program Guide) FUNCTION
TELETEXT (EUROPE) FUNCTION
USB MULTIMEDIA PLAYBACK
MULTI-LANGUAGE ON-SCREEN-DISPLAY
FULL FUNCTION REMOTE CONTROL
HDMI, YPbPr, AV, CI, VGA, PC AUDIO, AND SCART INPUT
COAXIAL OUTPUT
EARPHONE OUTPUT
DETACHABLE STAND HOLDER
EXTERNAL ANTENNA JACK
BUILT-IN SPEAKERS
NOISE REDUCTION FUNCTION
FEATURES
5
MAIN UNIT
GENERAL PARTS
Front View
Side View
1. TFT display screen
2. Remote control sensor
3. Power indicator: In standby
mode the indicator light will
display red color; when
switching on the unit the
indicator light will display blue
color.
4. Stand holder
5. VOL +/- button: To
increase/decrease the volume
level or move left/right.
6. CH +/- button: To select next/
previous channel or move
up/down.
7. MENU button: To enter menu
setting page.
8. SOURCE button: To select the
input source.
9. POWER button: To turn
ON/OFF the TV.
6
1. EARPHONE output terminal
2. HDMI1/HDMI2 input terminals
3. RF input terminal- To connect the external antenna.
4. PC AUDIO input terminal
5. COAXIAL output terminal
6. SCART input terminal
7. CI input terminal
8. USB input slot- For multimedia files playback.
9. HDMI3 input terminal
10. AV input terminal
11. YPbPr input terminal
12. VGA input terminal
13. Built-in speakers
GENERAL PARTS
Back View
7
REMOTE CONTROL 1. POWER: To set the unit in standby mode; press it
again to switch it on.
2. MUTE: To mute the sound.
3. AUTO: To adjust the screen automatically (in PC/VGA
mode).
4. NUMBERIC BUTTONS (0-9): To input the number
information, such as channel number and so on.
5. -/--: To select one digit, two digits and three digits.
6. : To return to previous channel or input source..
7. ASPECT: Press this button repeatedly to select
desired aspect ratio of screen.
8. AUDIO: To select different soundtrack.
9. VOL +/-: To turn up/down the volume.
10. CH+/-: To play the next/previous channel.
11. DISPLAY: To display information of current program.
12. ▲ : Up navigation button.
13. ◄ : Left navigation button.
14. OK: To confirm selection.
15. ►: Right navigation button.
16. ▼ : Down navigation button.
17. MENU: To display the main menu. Press it again to
return to previous menu page.
18. EXIT: To exit menu page.
19. SOURCE: To switch the input source.
20. P-MODE: To select desired picture mode.
21. SLEEP: To set the sleep time as desired.
22. S-MODE: To select desired sound mode.
23. FAV: To enter the favorite channels list page.
24. FAV-: To play previous favorite channel.
25. EPG: To display electronic program guide information.
26. FAV+: To play next favorite channel.
27. TEXT: To display the teletext.
28. HOLD: To hold the teletext.
29. SUBTITLE: To show the subtitle. Press it again to hide
subtitle.
30. TV/RADIO: To switch the unit between TV and radio.
31. INDEX: To enter index page.
32. SIZE: To switch teletext size.
33. SUBPAGE: To enter the subpage of teletext.
34. REVEAL: To hide teletext, or display hidden
characters.
35. MEDIA: To enter MEDIA mode directly.
36. : To play or pause playing.
37. : To move fast forward.
38. : To move fast backward.
39. ● : RECORD (No function on this model)
40. ■ : To stop playing.
41. : To play next chapter.
42. : To play previous chapter.
43. RED button.
44. GREEN button.
45. BLUE button.
46. YELLOW button.
8
REMOTE CONTROL PREPARATION BATTERY INSTALLATION
Install the batteries as the following pictures. Be sure + and – terminals are positioned as
indicated in the battery compartment (Fig1).
SERVICE LIFE OF BATTERIES
The batteries normally last for one year although this depends on how often the remote
control is used.
If the remote control fails to work even when it is operated near the player, replace the
batteries.
Use two size AAA dry batteries.
NOTE:
Do not drop, step on or otherwise impact the remote control. This may damage the parts
or lead to malfunction.
If the remote control is not going to be used for a long time, remove the batteries.
REMOTE CONTROL OPERATION
Point the remote control from no more
than about 6 m from the remote control
sensor and within about 60° of the front
of the player (Fig2).
NOTES:
The operating distance may vary
according to the brightness of the
room.
Do not point bright light at remote
control sensor.
Do not place objects between the
Remote control and the remote
control Sensor.
Do not use this remote control while
simultaneously operating the
remote control of any other
equipment.
Fig1 Fig2
Remote Control
Sensor Push
Open
Press
9
Ensure all the cables are disconnected from the main unit before connecting to AC
power source by AC power adaptor.
Read through the instructions before connecting other equipment.
CONNECTING TO AC POWER SOURCE
CONNECT EXTERNAL ANTENNA TO UNIT Install external antenna into antenna jack for best picture.
BASIC CONNECTION
Main unit
Antenna
Outdoor antenna amplifier
Indoor antenna amplifier
Power plug of antenna amplifier
75 OHM antenna plug
To power outlet
10
HDMI CONNECTION
SCART CONNECTION
NOTE: The users can connect up to three HDMI devices to this unit
at same time.
Back of DVD/VCR
Back of DVD/VCR
HDMI cable
(Not included)
Use HDMI cable (not included) to connect the unit with other devices to receive high-definition
multimedia signal.
SCART cable (Not included)
11
EARPHONE CONNECTION
PC/VGA CONNECTION
PC
Earphone cable (Not included)
Use VGA cable and Audio cable to connect the unit with TV or PC, and use this product as a
monitor.
Audio cable (Not included)
VGA cable (Not included)
12
COAXIAL CONNECTION
USB CONNECTION
COMPOSITE AV CONNECTION
Back of DVD/VCR
Use coaxial cable (not included) to connect the unit with amplifier or other audio decoding devices for coaxial audio signal output.
Insert an USB memory device to playback MOVIE / MUSIC /
PHOTO / Multimedia files.
AV cable
(Not included)
For basic connection, use the composite Audio L/R (white/red) and CVBS (yellow) cable (not included) to connect the unit with other devices.
13
YPBPR CONNECTION
INSERT A CI CARD
MAKE SURE ALL THE EQUIPMENTS AND POWER CORD ARE CONNECTED
PROPERLY AND THE UNIT IS SET IN CORRECT MODE BEFORE KINDS OF
OPERATIONS.
Back of DVD/VCR
CI slot
YPbPr cable (Not included)
14
Press POWER button on unit or remote control to power ON the unit (indicator will glow
blue); press it again to power OFF (standby mode) the unit (indicator will glow red).
Press SOURCE button on unit or remote control to set the unit in ATV or DTV mode.
SELECT DESIRED PROGRAM
- Press CH+ button to play next channel.
- Press CH- button to play previous channel.
- Press number buttons on remote control directly to select desired program.
NOTE: Press -/-- button repeatedly to select one digit, two digits or three digits.
VOLUME CONTROL
- Press VOL+ or VOL- to adjust the level of current volume.
- Available range: 0-100.
MUTE CONTROL
Press MUTE button to mute the sound, press it again to turn on the sound.
SOURCE SETTING
- Press SOURCE button on unit or remote control to display the input source list.
- Press UP or DOWN navigation button to select desired input source, then press OK
button to confirm selection.
- Available options: DTV, ATV, SCART, YPbPr, PC, HDMI1, HDMI2, HDMI3, AV, USB.
PICTURE MODE
- Press P-MODE button on remote control repeatedly to select desired PICTURE mode
directly.
- Available options: Standard, Mild, User, Dynamic.
SOUND MODE
- Press S-MODE button on remote control repeatedly to select SOUND mode directly.
- Available options: Standard, Music, Movie, Sports, User.
SLEEP TIMER SETTING
- Press SLEEP button on remote control repeatedly to select SLEEP TIMER directly.
- Available options: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min.
VIDEO SIZE SETTING
- Press ASPECT button on remote control repeatedly to select VIDEO SIZE directly.
- Available options: Panorama, 4:3, 16:9, Zoom1, Zoom2.
NOTE: The available video size may be different in different input source.
BASIC OPERATIONS
15
AUDIO SETTING
- In DTV mode: Press AUDIO button on remote control to enter Audio Languages menu
page directly, then press navigation buttons to select desired option.
- In ATV mode: Press AUDIO button to select available soundtrack.
INFORMATION DISPLAY
Press DISPLAY button on remote control to display information of current program.
TV GUIDE (FOR DTV MODE ONLY)
Press EPG button on remote control to enter below menu page:
- Press INDEX button on remote control to display index.
- Press GREEN button on remote control to enter Remind page.
- Press YELLOW button on remote control to enter Schedule page.
FAVORITE LIST
- Press FAV button on remote control to enter Favorite
List page.
- Press UP or DOWN navigation button to select
desired channel.
- Press OK button to confirm selection.
NOTE: During normal playing, press FAV+/FAV- button to
play next or previous favorite channel directly.
16
QUICK SELECT
- Press OK button on remote control to enter Channel
List page directly.
- Press UP or DOWN navigation button to select desired
channel.
- Press OK button to confirm selection.
TELETEXT
Press TEXT button on remote control to view the available
teletext information.
TV/RADIO (FOR DTV MODE ONLY)
Press TV/RADIO button on remote control to switch the
unit between TV and radio mode.
SUBTITLE
- Press SUBTITLE button on remote control to enter Subtitle Language page directly.
- Press navigation buttons to select desired option.
- Press OK button to confirm selection.
MEDIA PLAYBACK
- Insert a USB memory device.
- Press SOURCE button on unit side or remote control to set the unit in USB mode.
- Press LEFT or RIGHT navigation button to select PHOTO/MUSIC/MOVIE/TEXT.
- Press OK button to enter file selection page and then use navigation buttons to select
preferred multimedia file.
- Once a file is highlighted, press OK button to add it to the play list and press OK button
17
again to erase it from the play list.
- Press button to start playing.
- Press EXIT button to return to previous menu page.
1. PHOTO
During PHOTO playback:
- Press DISPLAY button to display/hide the tool bar.
- Press LEFT or RIGHT navigation button to select preferred option in the tool bar and
press OK button to confirm selection.
- Press button to pause/start playing.
- Press button on remote control to play previous photo in the play list.
- Press button on remote control to play next photo in the play list.
- Press ■ button on remote control to stop playing.
2. MUSIC
18
During MUSIC playing:
- Press LEFT or RIGHT navigation button to select preferred option in the tool bar and
press OK button to confirm selection.
- Press button to pause/start playing.
- Press button on remote control to play fast backward.
- Press button on remote control to play fast forward.
- Press button on remote control to play previous audio file in the play list.
- Press button on remote control to play next audio file in the play list.
- Press GREEN button to remove all the files from play list.
- Press YELLOW button to remove current file from play list.
- Press BLUE button to enter Screen Saver mode and press any button on remote control
to exit Screen Saver mode.
- Press ■ button on remote control to stop playing.
3. MOVIE
During MOVIE playing:
- Press DISPLAY button to display/hide the tool bar.
- Press LEFT or RIGHT navigation button to select preferred option in the tool bar and
press OK button to confirm selection.
- Press button to pause/start playing.
- Press button on remote control to play fast backward.
- Press button on remote control to play fast forward.
- Press button on remote control to play previous movie in the play list.
- Press button on remote control to play next movie in the play list.
- Press ■ button on remote control to stop playing.
19
4. TEXT
During TEXT playing:
- Press DISPLAY button to display/hide the tool bar.
- Press LEFT or RIGHT navigation button to select preferred option in the tool bar and
press OK button to confirm selection.
- Press button on remote control to display previous page.
- Press button on remote control to display next page.
- Press button on remote control to play previous text file in the play list.
- Press button on remote control to play next text file in the play list.
- Press ■ button on remote control to stop playing.
20
The unit contains different setting menus. Once the initial programming is entered, it will
be remained in the memory until it is changed, and the unit can always be operated
under the same conditions.
This setting will be remained in the memory until the settings are changed even after
setting the player to standby mode.
Common procedure for initial settings
- Press MENU button on unit side or remote control to display the main menu.
- Press LEFT or RIGHT navigation button to select different menus.
- Press OK button to enter a menu and press UP or DOWN navigation button to select
preferred option.
- Press OK button to enter adjusting menu page.
- Press LEFT or RIGHT navigation button to adjust the value.
- Press MENU button to save current setting and return to previous menu page.
- Press EXIT button to exit menu page.
DTV MODE Press SOURCE button on unit side or remote control to set the unit in DTV mode.
First Time Installation If first time using, below menu page will appear on the screen after turning this unit on:
OSD Language
Press LEFT or RIGHT navigation button to select preferred On-Screen-Display language.
Country
Press LEFT or RIGHT navigation button to select the country that you are living in.
Tune Type
Press LEFT or RIGHT navigation button to select preferred tune type.
MAIN MENU
21
If above settings are finished, press OK button to confirm selection and enter Channel
Tuning page. Then the unit will automatically search all the available ATV and DTV
channels.
- If you want to skip ATV or DTV channel tuning, press MENU button and use
LEFT/RIGHT navigation buttons to select YES; select NO to continue tuning.
- If you want to exit all the tuning, press EXIT button and use LEFT/RIGHT navigation
buttons to select YES; select NO to continue tuning.
1. CHANNEL
1.1 Auto Scan
Press UP or DOWN navigation button to select Auto Scan item, then press OK button to
enter submenu.
22
Country
Press LEFT or RIGHT navigation button to select the country that you are living in.
Tune Type
Press LEFT or RIGHT navigation button to select the tune type.
Once above settings are finished, press OK button to start auto channel scanning.
1.2 DTV Manual Tuning
Press UP or DOWN navigation button to select DTV Manual Tuning, then press OK button
to enter below page:
Press LEFT or RIGHT navigation button to select channel, then press OK button to search
programs.
1.3 ATV Manual Tuning
Press UP or DOWN navigation button to select ATV Manual Tuning, then press OK button
to enter below page:
- Press UP or DOWN navigation button to select the second option.
- Press LEFT or RIGHT navigation button to adjust it. - Press RED button on remote control to save it.
23
1.4 Programme Edit - Press RED button on remote control to enter Delete Mode. Then press UP or DOWN
navigation button to move the cursor and press RED button again to delete a channel. - Press GREEN button on remote control to enter Rename Mode. Then press UP or
DOWN navigation button to move the cursor and press LEFT or RIGHT navigation button to adjust the value.
NOTE: Rename function is available only for analog channels. - Press YELLOW button on remote control to enter Mode. Then press UP or DOWN
navigation button to move the cursor and press YELLOW button again to move a channel.
- Press BLUE button on remote control to skip a channel. - Press FAV button to add a channel to the Favorite List.
1.5 Signal Information This item is used to display the signal information of a digital program.
1.6 CI Information
The TV has a “CI Slot” where is possible insert a CAM (Conditional Access Module) (not
included) to see DVB-T pay channels through a Smart Card.
NOTE: The compatibility of all CAM is not guaranteed.
Before inserting the CAM, make sure the TV is in standby mode. Insert CAM module in the
correct direction.
Please insert it gently and correctly otherwise it can be damaged.
24
2. PICTURE
2.1 Picture Mode
Available options: Standard, Mild, User, Dynamic.
NOTE: If the value of Contrast, Brightness, Color or Sharpness has changed, Picture Mode
will turn to User automatically.
2.2 Contrast
The value of contrast can be adjusted from 0-100.
2.3 Brightness
The value of brightness can be adjusted from 0-100.
2.4 Color
The value of color saturation can be adjusted from 0-100.
2.5 Sharpness
The value of sharpness can be adjusted from 0-100.
2.6 Tint
The value of tint can be adjusted from 0-100.
NOTE: This item is available only in NTSC system.
2.7 Color Temp
This item is used to adjust the optimum color temperature for suitable viewing.
Available options: User, Cool, Medium, Warm.
25
2.8 Red
The value of red can be adjusted from 0-100.
2.9 Green
The value of green can be adjusted from 0-100.
2.10 Blue
The value of blue can be adjusted from 0-100.
NOTE: If the value of Red, Green or Blue has changed, Color Temp will turn to User
automatically.
2.11 Aspect Ratio
Available options: Panorama, 4:3, 16:9, Zoom1, Zoom2.
2.12 Noise Reduction
Available options: Off, Low, Middle, High.
2.13 Screen (for PC mode only)
3. SOUND
3.1 Sound Mode
Available options: Standard, Music, Movie, Sports, User.
NOTE: If the value of Treble or Bass has changed, Sound Mode will turn to User
automatically.
3.2 Treble
This item is used to adjust the level of higher-pitched sounds from 0-100.
26
3.3 Bass
This item is used to adjust the level of lower-pitched sounds from 0-100.
3.4 Balance
This item is used to adjust the audio output between left and right speakers from -50 to +50.
3.5 Auto Volume
This item is used to set Auto Volume on/off.
3.6 Surround Sound
This item is used to set Surround Sound on/off.
3.7 SPDIF Mode
Available options: Auto, PCM, Off.
4. TIME
4.1 Clock
- If DTV scanning is not performed, or no
available digital channel is present, the users
can adjust the Clock manually.
- Press UP or DOWN navigation button to select
Date/Month/Year/Hour/Minute.
- Press LEFT or RIGHT navigation button to
adjust the value.
NOTE: During digital channel normal playing,
Clock is adjustable only when first time entering it.
27
4.2 Off Time
This item is used to set the auto power off time.
- Press UP or DOWN navigation button to select Repeat/Hour/Minute.
- Press LEFT or RIGHT navigation button to adjust the value.
4.3 On Time
This item is used to set the auto power on time.
- Press UP or DOWN navigation button to select desired item.
- Press LEFT or RIGHT navigation button to adjust the value.
NOTE: If no available channel is present, Channel will not be adjustable and it will display
grey color.
4.4 Sleep Timer
This item is used to set the automatic sleep time in standby mode.
Available options: Off, 10min, 20min, 30min, 60min, 90min, 120min, 180min, 240min.
4.5 Auto Sleep
This item is used to set Auto Sleep on/off.
4.6 Time Zone
This item is used to select preferred time zone.
28
5. OPTION
5.1 OSD Language
This item is used to select preferred On-Screen-Display language.
5.2 Audio Language 1st
This item is used to select preferred First Audio Language.
5.3Audio Language 2nd
This item is used to select preferred Second Audio Language.
5.4 Subtitle Language 1st
This item is used to select preferred First Subtitle Language.
5.5 Subtitle Language 2nd
This item is used to select preferred Second Subtitle Language.
5.6 OSD Duration
This item is used to select preferred OSD menu display duration.
5.7 Country
It displays the country for Auto Tuning.
5.8 Restore Factory Default
This item is used to resume factory default settings.
29
6. LOCK
6.1 Lock System
Input the password by pressing number buttons on remote control to enter it.
NOTE: The factory default password is “0000”.
6.2 Set Password
Press number buttons on remote control to input “Please enter old
password”, “Please enter new password” and “Confirm new
password”.
6.3 Block Program
- Press UP or DOWN navigation button to select the channel.
- Press GREEN button on remote control to lock/unlock a channel.
6.4 Parental Guidance
This item is used to set the preferred parental guidance.
Available options: Off, 4-18.
30
ATV AND OTHER MODES - Press SOURCE button on unit side or remote control to select preferred input source.
- For menu operations in above modes, please refer to the menu operations in DTV
mode.
PC MODE - Power on your Personal Computer and connect it to this TV.
- Press SOURCE button on unit side or remote control to set the unit in PC mode.
- Press MENU button to display the main menu and use LEFT or RIGHT navigation
button to select PICTURE.
- Then press OK button and use UP or DOWN navigation button to select Screen.
- Press OK button again to enter submenu.
- Press UP or DOWN navigation button to select desired item.
- Press LEFT or RIGHT navigation button to adjust the value.
Auto Adjust
This item is used to adjust the value of screen automatically.
Horizontal Pos.
This item is used to adjust the value of horizontal position from 0-100.
Vertical Pos.
This item is used to adjust the value of vertical position from 0-100.
Size
This item is used to adjust the value of size from 0-100.
Phase
This item is used to adjust the value of phase from 0-100.
NOTE: The picture will shake with unsuitable phase setting.
For the PICTURE, SOUND, TIME, OPTION and LOCK menus, please refer to the menu
operations in DTV mode.
31
Be sure to press POWER button to set the player to the standby mode and disconnect
the power plug before maintaining the player.
Wipe the player with a dry, soft cloth.
If the surface is extremely dirty, wipe clean with a cloth which has been dipped in a weak
soap-water solution and wrung out thoroughly, and then wipe again with a dry cloth.
Never use alcohol, benzene, thinner, cleaning fluid or other chemicals. And do not use
compressed air to remove dust.
Display Device 81 cm (32 inch) LED TV
Resolution 1920 x 1080
Pixel Pitch 0.12125 (H) x 0.36375 (V) mm
Luminance 200 cd/m2
Contrast Ratio 6000:1
Aspect Ratio 16:9
Response Time Max. 12 ms
Viewing Angle 176 (H) / 176 (V)
Visible Range 697.7 (H) x 392.3 (V) mm
Life Time 50,000 Hrs
Multimedia Playback
Format
Movie: AVI, MOV, MKV, MP4
Music: MP3, WAV, WMA, AAC, AC3
Photo: JPEG, BMP, PNG
Power Source AC 100~240V, 50/60Hz
Power Consumption ≤65W
Operation Temperature -5°C ~ 45°C
Measurement 770 (W) x 190 (D) x 483 (H) mm
Weight Approx. 9,300 g
*Specifications are subject to change without notice.
MAINTENANCE
SPECIFICATIONS
32
Contact a professional for assistance when wall mounting your TV. We are not
responsible for any damage to the product or injury to yourself, if you mount the TV on
your own.
Do not wall mount the TV while TV is turned on. It may cause personal injury due to
electric shock.
Use standard M6 screws (12mm / 4 pieces) to mount this TV.
WALL MOUNTING
Back of your TV
33
Check the following points before assuming malfunctions of this unit:
Symptom Remedy
No power. Insert the AC adaptor securely into the power outlet.
No picture. Ensure that the equipment is connected properly.
● No sound.
● Distorted sound.
● Ensure that the equipment is connected properly.
● Ensure that the input setting for the TV and stereo system
are correct.
● Adjust the master volume to a suitable volume by pressing
VOL+/VOL- button.
No operations can be
performed with the remote
control unit.
● Check the batteries are installed with the correct polarities.
● The batteries are exhausted: Replace them with new ones.
● Point remote control at the remote control sensor and
operate it again.
● Operate the remote control unit at a distance of no more
than 6m from the remote control sensor on TV.
● Remove the obstacles between the remote control and
remote control sensor on TV.
No key operation (by the
main unit and/or the
remote control unit) is
effective.
Disconnect the power adaptor and then reconnect it. (The
player may not be operating properly due to lightning, static
electricity or some other factors.)
Symptom (TV) Remedy
No or poor picture.
● Adjust antenna or use an external antenna.
● Relocate the unit near a window (if inside a building).
● Move units away from this product that causes interference.
● Do Auto Tuning again.
● Try another channel.
No sound or poor sound.
● Check the audio settings.
● Press MUTE button on remote control to cancel mute
function.
● Unplug the headphone.
Noise or other interface. Electronic equipment near the unit is causing interference.
Relocate the unit or move the equipment.
GENERAL TROUBLESHOOTING
34
EC Declaration of Conformity
The product complies with the protective requirements of European
Directives 2004/108/EC.
The conformity declaration for this product is available under
www.jay-tech.de.
Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE)
This symbol on the product or in the instructions means that your electrical
and electronic equipment should be disposed at the end of its life separately
from your household waste. There are separate collection systems for
recycling in the EU. For more information, please contact the local authority
or your retailer where you purchased the product.
