saint petersburg chamber of commerce and industry saint petersburg - the key economic partner in the...
TRANSCRIPT
Saint Petersburg Chamber of Commerce
and Industry
Saint Petersburg Saint Petersburg -- the key the key economic partner in the economic partner in the
Baltic Sea region Baltic Sea region
Saint Petersburg innovation policySaint Petersburg innovation policy Saint Petersburg – international levelinnovation center
Saint Petersburg social and economic development till 2025(Saint Petersburg government regulation No. 884 dated 20.07.2007)
- the largest international business center
- the largest commercial and transport center
- innovation and administration center
Saint Petersburg Chamber of Commerce
and Industry
Saint Petersburg innovation policySaint Petersburg innovation policy
Forming competitive clusters is the priority of Saint Petersburg innovation policy
Saint Petersburg has a variety of branched and potential inter-branch clusters, which are competitive at the international level, including informational technologies, optical electronic, instrumental engineering, automobile industry, shipbuilding, transport, material science, etc.
Saint Petersburg Chamber of Commerce
and Industry
Saint Petersburg Government
STRATEGIC PROJECTS OF STRATEGIC PROJECTS OF SAINT PETERSBURG INNOVATION CLUSTER SAINT PETERSBURG INNOVATION CLUSTER
NETWORKNETWORK
Saint Petersburg Chamber of Commerce
and Industry
INTERNATIONAL INNOVATION AND TECHNOLOGY CENTERINTERNATIONAL INNOVATION AND TECHNOLOGY CENTERAs part of the visit to Bavaria of the Governor of Saint Petersburg Valentina I. Matvienko, an agreement on establishing an International Innovation and Technology Center was signed. The initiators of this agreement are:
• IMC/HM International Project Management• Institute of regional innovation systems• Russian-German Polymer Institute.
The key investors of the project are:
• Technischer Überwachungsverein Bayern Süd (TÜV Süd) (World Certification Leader)
• World Trade Center (WTC) • Siemens• Daimler AG• Erlangen AG – Germany Industrial Parks Network • CATELLA Investment Group
The partners of the project are:
• Bavaria Government• Deutsches Ost Forum (German-East Forum)• Technische Universität München (Munich Technical University)
INTERNATIONAL INNOVATION PROJECTSINTERNATIONAL INNOVATION PROJECTS ENGINEERING POLYMER CENTERENGINEERING POLYMER CENTER
In November, 2007 the Engineering Polymer Center was opened - it is a joint project of OJSC Russian Railways, SPbSU, LLC IP, SKZ GmbH (Wurzburg, Germany).
Goals of the Project: gathering, analysis and systematization of information concerning development and implementation of modern constructive polymer materials in world practice; holding science-practical conferences on the facilities of constructional polymer materials and new technologies of recycling them; development of innovative technologies for creating and recycling construction polymers, creation of new pilot batches and their implementation.
Russian-German Institute of Polymers conducts R&Ds for the Russian Railways in co-operation with Saint Petersburg State University and the leading Universities of the city.
THE CENTER FOR DYNAMIC TESTS THE CENTER FOR DYNAMIC TESTS The testing siteThe testing site – joint – joint project of project of LengiprotransLengiprotrans andand
Mekhanobr-TechnikaMekhanobr-Technika
The center's main activities are: research of the upper constructions of railway roads, highways, runaways, taking into account the load, velocities, climate factors and other conditions.
•Practical and theoretical research of different types of constructions and their elements for the upper roads constructions: motor and railroads, airports, undergrounds, taking into account the influence of loads, velocities, climate factors and other conditions.
•Theoretical research in the area of different types of materials and construction elements of the upper road construction implementation, including elastomeric materials (roadbed base plates, under-sleeper shock absorbers, rail brace sleepers) and also geotextiles and geogrids.
•On-site and dynamic testing of different constructions of the upper road constructions and components, checking and approving project solutions.
Such a stand is located Munich Technical University Laboratory, GermanySuch a stand is located Munich Technical University Laboratory, Germany
At present, requested dynamic tests are ordered in foreign countries, and the presence of a Russian center will allow to make import substitution of these services and provide unique possibilities for foreign companies (test for extreme temperatures from +60° to - 60°).The center for dynamic tests will allow to test the working capacity of transport constructions, knots and materials in conditions of acting operational loadings and environmental conditions inherent to various regions of Russia and other countries.
The The ““Testing stand”Testing stand” project was presented at the 9project was presented at the 9thth Russian-German Forum Russian-German Forum “ “St. St. Petersburg DialogPetersburg Dialog””, , 14-16 14-16 July,July, 2009 2009, Munich, Germany., Munich, Germany.
THE CENTER FOR DYNAMIC TESTS - TESTING SITETHE CENTER FOR DYNAMIC TESTS - TESTING SITE
MOSCOW –MOSCOW – SAINT PETERSBURG HIGH-SPEED SERVICE SAINT PETERSBURG HIGH-SPEED SERVICE
OJSC Lengiprotrans is the general designer of the project for the investment feasibility to establishing the Moscow – Saint Petersburg high-speed service
SAINT PETERSBURG – HELSINKI HIGH-SPEED SERVICESAINT PETERSBURG – HELSINKI HIGH-SPEED SERVICE
OJSC Lengiprotrans is the general designer of the project of organizing the high-speed service Saint Petersburg - border - Helsinki with a freight service
THE OVERGROUND EXPRESS TRAINTHE OVERGROUND EXPRESS TRAIN
OJSC Lengiprotrans is the general designer of the project “Construction of a new type of urban passenger transport, the Overground express train” in St. Petersburg
CREATION OF THE CONSTRUCTION MATERIALS CREATION OF THE CONSTRUCTION MATERIALS NANOCENTERNANOCENTER
Ioffe Physical-Technical Institute
National Academy of Sciences of
Belarus
Komsomolskaya Pravda scientific production
association for recycling plastic
ROSNANO
The Ioffe Physical Technical Institute is one of the largest science centers in Russia. It conducts both fundamental and applied research in the major areas of modern physics and production engineering.
The institute was established in 1918 by Abram Fedorovich Ioffe who then headed it for several decades.
IOFFE PHYSICAL TECHNICAL INSTITUTE IOFFE PHYSICAL TECHNICAL INSTITUTE
The institute is a structural division of the Russian Academy of Sciences and is a part of the organization united in the Department of Physical Sciences of the Russian Academy of Sciences.
Since 1987, the Ioffe Physical-Technical Institute has been led by Zhores Ivanovich Alferov, the vice-president of the Russian Academy of Sciences, deputy of the State Duma and the Nobel prize winner
The purpose: Development, implementation and manufacturing devices of modern opto- and
nanoelectronics in the field of solar and hydrogen power engineering, power electronics, laser instrument engineering, diagnostic and medical equipment for modern medicine. Creation of a high-duty centre of designing and manufacturing of collective access for instrument-engineering branch in Russia
Tasks:• Manufacturing of modern microcircuits of all classes with flash-memory as
background serial products for the world market; • Manufacturing of solar cells for independent power supply systems;
manufacturing of photoreception CCDs and bolometric matrixes; • Manufacturing of semiconductor lasers; • Manufacturing of light- and photo diodes; • Development and manufacturing of process equipment for electronic and
medical instrument engineering; • Development and manufacturing of microsystems of individual human
diagnostics
IOFFE PHYSICAL TECHNICAL INSTITUTE IOFFE PHYSICAL TECHNICAL INSTITUTE Physics-Technological Nanoelectronic CenterPhysics-Technological Nanoelectronic Center
Tasks:• Development and manufacturing of “systems on a crystal” for the instrument
engineering factories of St. Petersburg and Russia; • Development and manufacturing of semiconductor devices for power electronics; • Manufacturing of electronic systems for the motor-plants based in St. Petersburg; • Creation of conditions for rapid decrease in expenses for development and
manufacturing of electronic systems and devices; • Providing for the factories of St. Petersburg of modern means of development
and libraries in the mode of collective access; • Development and implementation of automated systems of designing of different
levels and purposes; • Development and manufacturing of base electronic systems for aircraft, Russian
Railways, RAO ES, ship builders.
IOFFE PHYSICAL TECHNICAL INSTITUTE IOFFE PHYSICAL TECHNICAL INSTITUTE Physics-Technological Nanoelectronic CenterPhysics-Technological Nanoelectronic Center
FOURTH GENERATION DEVICEFOURTH GENERATION DEVICE FOR MANUFACTURING FULLERENES AND NANOCOMPOSITES FOR MANUFACTURING FULLERENES AND NANOCOMPOSITES
Ioffe Physical Technical Institute
National Academy of Sciences of
Belarus
Komsomolskaya Pravda scientific production
association for recycling plastic
ROSNANO
The centre of collective use in the field of manufacturing nanocarbonic materials and fullerenes:•The complex of equipment (including the license to use the equipment) for manufacturing nanomaterials;•Nanomaterials production technology (including design and operational documentation);•Technological possibilities for recycling the materials into products;•The Laboratory complex for materials and product quality control.
Strategic task of the Center:
Commercialization of scientific research and attraction of strategic customers.
At the moment, an agreement with the Ministry of Economics of Finland on manufacturing fullerene-containing nanocarbonic materials with a polymeric matrix and fullerene-containing modificators is being prepared and also corresponding requests sent to the ROSNANO
The project was presented at the forum “Effective Cooperation in Europe”, June 7-9, 2010, Brussels, Belgium
National Academy of Sciences of Belarus
Komsomolskaya Pravda scientific production association for
recycling plastic
ROSNANOIoffe Physical Technical Institute
Section of fullerenes
and nanocomposites
manufacturing
Section of prepreg manufacturing
BINDINGS
FILLERS
THE LINE OF BINDING
IMPREGNATINGBY MELT
FILLERS
NANOMODIFICATION
Labo
rato
ry C
ompl
ex (
Qua
lity
Con
trol
)
GRINDING THE PREPREGES
Section of composite products manufacturing
SECTION OF NANOMATERIALS RECYCLING:- PRESSURED FOUNDRY;
- PRESS_FORMING;- EXTRUSION;
- COATING DEPOSITION.
SECTION OF WINDING THE TUBULAR PRODUCTS:- HOT FORMING
FINISHED
PRODUCTS
AND
MATERIALS
WAREHOUSE
CUSTOMERS:OJSC RZDKrylov SBRI
SBRI PrometeyGUP MetropolitenSUE Vodokanal
ROSNANO
THE CENTER’S FUNCTIONAL SCHEMETHE CENTER’S FUNCTIONAL SCHEME
National Academy of Sciences of Belarus
Komsomolskaya Pravda scientific production association
for recycling plastic
Ioffe Physical Technical Institute
CONSTRUCTION OF THE PROTOTYPING CENTER AND CONSTRUCTION OF THE PROTOTYPING CENTER AND INTERNATIONAL COOPERATION NETWORK INTERNATIONAL COOPERATION NETWORK
FOR CREATION OF LIGHT-EMITTING DIODE PRODUCTS AND DEVICES FOR CREATION OF LIGHT-EMITTING DIODE PRODUCTS AND DEVICES ON THE BASIS OF AN INTEGRATED TECHNOLOGICAL PLATFORMON THE BASIS OF AN INTEGRATED TECHNOLOGICAL PLATFORM
The key participants:• SPbSU ITMO
• Optoelectronics cluster
• Mechanical engineering and metal-working cluster
Saint Petersburg State University of Informational Technologies, Mechanics and Optics
One of the primary goals One of the primary goals – formation of the university as a national innovative formation of the university as a national innovative hub, aimed at effective commercialization of results of scientific research and hub, aimed at effective commercialization of results of scientific research and development in the field of IОТ with participation of Russian and foreign development in the field of IОТ with participation of Russian and foreign participants of innovation activityparticipants of innovation activity
SPBSU ITMO INNOVATION DEVELOPMENTSPBSU ITMO INNOVATION DEVELOPMENT
The Program Document – The Program of SPbSU ITMO development for 2009- 2018.The format – national research university ITMO.The Mission – creation of competitive advantages of Russia in the sphere of informational and optical technologies in conditions of speeding up scientific and technical development and globalization of the world economy
CONDITIONS OF THE COOPERATION CONDITIONS OF THE COOPERATION NETWORK FORMATIONNETWORK FORMATION
The availability of the following is necessaryThe availability of the following is necessary::
• Rules of conduct for cooperation members.
•Business-processes for specialist cooperation during cooperative project implementation.
•A unified informational environment providing access to the electronic documents of the project and cooperation network resource databases.
•Technical and the software distribution of work of the specialists of a cooperation network on the basis of various Internet resources.
•Modern software and industrial equipment, allowing to produce competitive products.
•Qualified specialists in different technical areas, whose competence should correspond to modern industrial standards.
The project was presented in the frameworks of the Youth International Economic Forum, June 16-17, 2010, St Petersburg, Russia
St. Petersburg State University ITMO experience: Integration of works on the basis of VPN-technologies
Preconditions for creation of the Centers of Prototyping and Industrial Preconditions for creation of the Centers of Prototyping and Industrial DesignDesign
SPb SU ITMO Internet
Techpribor Techpribor Techpribor
The Innovation Technologies Center of SPbSU ITMO
Plant KP Svetlana-Optoelectronics
Library of SPb SU ITMO, Technische Universität Ilmenau (Germany)
CJSCCJSC SVETLANASVETLANA - -OPTOELECTRONICSOPTOELECTRONICS
The only plant in Russia which organizes the full work cycle of The only plant in Russia which organizes the full work cycle of manufacturing semi-conductor light sources - from initial manufacturing semi-conductor light sources - from initial heterostructures to ready light-emitting diode lamps. Joint-Stock heterostructures to ready light-emitting diode lamps. Joint-Stock Company Svetlana-OE realizes nano-technologies in optoelectronic Company Svetlana-OE realizes nano-technologies in optoelectronic products. products.
Along with batch production, the plant carries out new product Along with batch production, the plant carries out new product development and implementation. development and implementation.
The project “Creation of the center of collective use for designing and preparation of manufacturing in the field of instrument engineering” has received a grant
from the St. Petersburg Government (the St. Petersburg Governmental order from 10.11.2009 No.
1255 as the best innovative design of 2009 implemented with a view of the cluster development).
THE CENTER OF LEADING PRODUCTION ENGINEERINGTHE CENTER OF LEADING PRODUCTION ENGINEERING
Council of experts
Tasks: -Revision and approval of the most promising technologies from the experts’ point of view
Tasks:
-Creation of a school of
designers on the basis
of developed
technologies;
-Project problem
solving;
-Creation of
qualification
improvement courses;
-Creation of department
of leading production
engineering
Tasks:
-Proposals for the
Council for promising
technologies
which are included
in the work of the
Center's executive
bodies;
- Participation in the
Advisory council;
- Transmitting the results
of the Center's work to
the market;
-The organization
of commodity markets
The center of leading production engineering
Executive board
Tasks:
- Development of production technology;
- Development of retraining methods;
- Creation of skilled-experimental
manufacturing
THE NETWORK OF INNOVATION-THE NETWORK OF INNOVATION-TECHNOLOGY CLUSTERSTECHNOLOGY CLUSTERS
INTERNATIONALINTERNATIONAL CENTER FOR CENTER FOR
INNOVATION ANDINNOVATION AND TECHNOLOGYTECHNOLOGY
OJSC LENGIPROTRANSSPA KP
Ioffe Physical Technical Institute
Svetlana - Optoelectronics
SPbSU ITMO
OJSC RZD
Institute of Polymers
SPbSU
INNOVATION INFRASTRUCTUREINNOVATION INFRASTRUCTURE
DESIGN CENTERS
SPECIALIZED LABORATORIES
COLLECTIVE ACCESS CENTERSCENTERS
NEWNEWPROJECTSPROJECTS
NEWNEW PROJECTSPROJECTS
NEWNEW PROJECTSPROJECTS
NEWNEW OBJECTSOBJECTS
NEWNEW OBJECTSOBJECTS
NEWNEW OBJECTSOBJECTSCLEAR ROOMS
NEWNEW OBJECTSOBJECTS
NEWNEW PROJECTSPROJECTS
NEWNEW PROJECTSPROJECTS
RUSSIAN INNOVATION WEEK, SEPTEMBER 28 – OCTOBER 1RUSSIAN INNOVATION WEEK, SEPTEMBER 28 – OCTOBER 1III St Petersburg International Innovation Forum, International III St Petersburg International Innovation Forum, International
industrial forum “Russian Industrialist – 2010”industrial forum “Russian Industrialist – 2010”
28.09 - Modernization. Innovations. Cluster initiatives, Round table, SPb CCI
Range of main problems:
• Problems and perspectives of development of the regional innovation system of St. Petersburg in the context of modernization;
• Perspectives of development of the business cooperation between St. Petersburg and the European Union;
• Creation of the international cooperation web for designing light emitting diode products and devices on the base of the united technological platform;
• Industrial policy of St. Petersburg;• From innovative ideas to successful projects;• The role of self-regulated organizations in designing and building of highspeed roads as
high-tech and innovative products;• Creation of the innovation infrastructure. Experience of the stand for dynamic tests for the
transport industry;• Engineering and production of the innovative light-emitting diode products
29.09 – Opening of the forum. Exhibition. Briefing of the Governor of St. Petersburg on cooperation development strategy between St Petersburg and South American countries
30.09 – Banking system of the North-East Region: New Realities, Conference
01.10 – Youth Convent, Discussion session
– Nanotechnologies and materials as a means to enhance competitive advantages of the Russian industries’ products, Conference
– Russian companies and foreign innovations: integration mechanisms, Round Table
RUSSIAN INNOVATION WEEK, SEPTEMBER 28 – OCTOBER 1RUSSIAN INNOVATION WEEK, SEPTEMBER 28 – OCTOBER 1III St Petersburg International Innovation Forum, International III St Petersburg International Innovation Forum, International
industrial forum “Russian Industrialist – 2010”industrial forum “Russian Industrialist – 2010”
THANK YOUTHANK YOU
Sergey I. TsybukovVice Chairman, SPb CCI Board Tel. 8 (812) 542-15-21Fax: +7 (812) 542-71-48E-mail: [email protected]