211

LED VERSION: Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced

A++

A+

A

Sandro

SANDRO65

.1 White .6 Grey .3 Anthracite .18 Deep Brown.4 Black

EU Regulation 874/2012 - Illumination equipment energy classes

LED VERSION:Class A/A+/A++Luminaire supplied with integrated LED modules that cannot be replaced

• Bollard light• Configuration: extruded aluminium structure.

Polycarbonate diffuser: satin UV-stabilised.• Double layer coating for high resistance to corrosion:

the aluminium components are painted with a double coat using powders which are compliant with QUALICOAT standards: a first layer of epoxy powder (with excellent chemical and mechanical resistance) and a second finishing layer of polyester powder (resistant to UV rays and atmospheric agents). The entire painting process of the aluminium fitting starts from components which have been sandblasted in advance to make the surface more porous and increase the adherence of the paint. Ares effects alkaline and acid washing to clean the surfaces completely, then rinses with demineralised water to remove any residue particles, subsequently a chemical conversion treatment is done to protect against rusting.

• Protection rating: IP65• In compliance with EN 60598-1 standards• Class of insulation: II• Installation: the luminaire is equipped with a piece of cable

and a wiring kit with crimp connectors and an adhesive heat-shrink tubing for a watertight electrical connection. The use of a corrugated tube (Ø 30-50mm) allows an easier connection to the line. We recommend installation on a concrete basement or surface, directly with bolts or through the dedicated fixing plate (to be ordered separately). Outdoor use requires suitable flexible cables.

• We recommend the use of a connection system with a protection degree greater than or equal to the protection degree of the luminaire.

• During the installation and the maintenance of the fixtures it is important to be careful and avoid damages on the paint coating. Damages on the coating exposed to outdoor conditions or water, could cause corrosion.Chemical substances affect the anticorrosion covering protection.

Protection againstimpact.IK 10 - 20,00 joule

Pre-wired with approx 200mm of cable

Bollard light

212

C0 / C180 C90 / C270

cd / 1000 lm

60˚

120˚

90˚

450

-2-4 20m

1

0

Lux

121

41

101181

4-2

C0 / C180 C90 / C270

cd / 1000 lm

60˚

120˚

90˚

450

-2-4 20m

2

0

Lux

4-2

1

1

1

1

1

1

21

21

21101

101

161 161381

1

21161

381

500

245 60

160 100

90

0

245 60

160 100

Sandro

65

65

502009White 2700K Lm LED 558 ≠ Lm OUTPUT 299

502007 White 2700K Lm LED 558 ≠ Lm OUTPUT 299

502006White 3000K Lm LED 600 ≠ lm OUTPUT 321

502003White 3000K Lm LED 600 ≠ lm OUTPUT 321

502005White 4000K Lm LED 650 ≠ lm OUTPUT 347

502002 White 4000K Lm LED 650 ≠ lm OUTPUT 347

@4000K

@4000K

Light Source: Power LED / 5,5W / Total power 8W / CRI>80 / 100÷240V / Integral electronic power supply

Light Source: Power LED / 5,5W / Total power 8W / CRI 80 / 100÷240V / Integral electronic power supply

Sandro - H.500mm

Sandro - H.900mm

213Sandro

170

100

160

65

5030

Incorrect Fixing MethodCorrect Fixing Method Correct Fixing MethodBollard �xed on plinth + plug Bollard �xed on plinth + �xing bolts Do not �x the bollard directly on the ground

acc. code

prod. code 138 237

502002 • •502003 • •502004 • •502005 • •502007 • •502009 • •

Accessories: Sandro

138BASE PLATE AND FIXING BOLTS160 x 100 x H 170mm

237SPD: (SURGE PROTECTION DEVICE) 275Vac MAXIMUM DISCHARGE CURRENT 10KA (8/20μs) MAXIMUM OPERATING CURRENT 5ASUITABLE FOR SERIES CONNECTION - IP66

Incorrect Fixing MethodDo not fix the bollard directly on the ground

Correct Fixing MethodBollard fixed on plint + suitable installation screws

Correct Fixing MethodBollard fixed on plinth + fixing bolts