sb-5000sb-5000 · 3925 stern ave. i st. charles, il 60174 email: [email protected] i fax:...
TRANSCRIPT
USESPavers, concrete and retaining walls. Can also be used on brickand clay pavers, masonry surfaces, natural stone, grout, tile andterra cotta. For both horizontal and vertical surfaces. Whenapplying to absorbent natural stone, clay pavers or blue stonealways do a test area first to ensure desired results. Notrecommended for surfaces with a high gloss finish as they do notabsorb the sealer and can become slippery when wet.
PRODUCTS FOR SEALING PREPARATIONSureClean - Deep Penetrating Multi-Use CleanerSureStrip - Fast Acting Sealer StripperEfflo Off - Efflorescence, Mineral & Salt Deposit CleanerS.R.B. - Stain & Rust BusterOil Extractor - Oil Stain Cleaner
PRODUCT DESCRIPTIONSB-5000 Stainblocking Invisible Sealer is a water based,penetrating, low VOC sealer that provides an invisible, durablebarrier against water, oil and stains on pavers, concrete andretaining walls. Ideal for driveways, industrial flooring, buildingentrances, shopping malls, food courts and other surfaces at riskfor oil, food and/or other staining. SB-5000 is an aqueousfluorochemical dispersion that does not contain any silicone orwax components.
PREPARATIONTo determine the suitability of this product for a specific surface,test on a small, inconspicuous area first. The surface should bethoroughly clean and free from previously applied sealers,
TOLL FREE: 800-932-3343 www.sek.us.com
oil, dust and loose material prior tosealer application. A leaf blower isrecommended to remove dust, debrisand fine sand particles from thesurface before sealing. If needed,prepare your surface for sealing byusing S.R.B. (Stain & Rust Buster) forspot cleaning, Oil Extractor for oil stainremoval, SureClean for overallcleaning, SureStrip for sealer removaland Efflo Off for removal ofefflorescence. Surface must be rinsedthoroughly of any cleaning agentresidue prior to applying SB-5000.Allow the cleaned surface to dry for a minimum of 24 hours tominimize any water entrapment under the SB-5000. Protectnearby property, vehicles and plants from overspray ofSB-5000.
APPLICATION INFORMATIONFor best results, apply SB-5000 Stainblocking Invisible Sealerat full strength (never dilute) using a low-pressure sprayer,roller, sponge or paint pad. When sprayed, use low pressurenot exceeding 60 PSI. Make sure that the surface is completelycovered. For optimal stain blocking, best practice is to apply asecond coat at right angles to the first coat soon after the firstappears to be dry. Coverage rate for second coat should bebetween 50% and 75% of the first coat. Apply second coatliberally, but do not allow to puddle, removing any excessproduct from the surface immediately with a foam roller.
DRYING TIMESurface will be dry to touch within 30 minutes at 65-85°F at50% relative humidity. Low surface or air temperature and orhigh relative humidity will extend dry times. Protect the surfacefrom dust, rain, condensation and traffic while drying. Area canbe open to foot & vehicular traffic in 24 hours depending onsite conditions.
MAINTENANCE/RE-APPLICATIONPavements should be properly maintained following SEK-Surebond's Restoration and Maintenance System guidelinesto get the best long-term performance from both the pavementand SB-5000. Keep surface clear of buildup of dirt, grime andstains by rinsing with cold, clean water. If staining of surfacedoes occur, Surebond sealers are compatible with Surebondmulti-use and specialty cleaners which can be used to removegeneral dirtiness, organic and inorganic stains like oils, foodand beverages and mineral deposits from the pavement
Benefits
• Blocks a wide variety of penetrants including water and oil
• Long lasting and durable
• <250 g/l and safe to use
• Water-based product moreenvironmentally friendly thansolvent systems
• Does not change the appearance of the substrate
• Does not yellow in sunlight and protects substrate from fading
TECHNICAL DATA SHEET
SB-5000SB-5000SB-5000
PROTECTPROTECT
� CONTRACTOR GRADE FOR RESIDENTIAL AND COMMERCIAL PROJECTS �
FeaturesWhat makes SB-5000 Stainblocking Invisible Sealer different?
Protective
Deep Penetrating
VOC compliant
Environmentally friendly
Invisible
UV resistant and stable
Stainblocking Invisible Sealer
Not recommend
Sellador Invisible Bloqueador de Manchas
Hardscape & Concrete ProtectionHardscape & Concrete Protection
Contractor Grade for Residential and Commercial ProjectsContractor Grade for Residential and Commercial ProjectsClasificación para contratistas para proyectos residenciales y comerciales
PROTECTPROTECT
FOR HARDSCAPE AND CONCRETE SURFACES
3925 Stern Ave.St. Charles, IL 60174800-932-3343www.sek.us.com
NET CONTENTS: 1 gallon, 3.8 liters 5 gallons, 19 liters 55 gallons, 208.2 liters Contenido neto: 1 galón, 3.8 litros 5 galones, 19 litros 55 galones, 208.2 litros
Environmentally Friendly & Water Based:Solvent free, VOC & EPA compliant
CAUTION: Eye IrritantPrecaucion: Irritante de los ojos
PROTECTIVE - Blocks oil, water and organic stainingPROTECTOR – Bloquea el aceite, el agua y las manchas de origen orgánico.
LONG LASTING - Deeply penetrating sealer provides durability DURADERO – El sellador de penetración profunda brinda durabilidad
TRANSPARENT FINISH - Does not alter appearance of the surfaceACABADO TRANSPARENTE – No altera la apariencia de la superficie
WATER BASEDWATER BASED
BREATHABLE =IMMEDIATE
APPLICATION!
Manufactured by SEK/Surebond, Inc. Copyright 2015. All trademarks are the property of SEK/Surebond, Inc. www.sek.us.com
surface. Test cleaners in inconspicuous area prior to cleaning.Be sure to check dilution rates for all cleaners to determine ifthey are ready to use or to determine appropriate dilution rateespecially for sealed surfaces. Efflorescence should beremoved using Efflo Off and a pressure washer, inconjunction with agitation from a natural fiber brush. Careshould be taken to ensure that excessive pressure is notutilized, as it may erode joint sand and could damage thesurface itself. Thoroughly rinse all cleaner off pavementsurface before sealing.
SB-5000 Stainblocking Invisible Sealer re-application shouldbe carried out every 5 - 10 years depending on the type ofpavement, weather, usage and wear.
PACKAGING/SIZES4 x 1 gallon containers per case5 gallon pails55 gallon drumsBulk packaging available
COVERAGE*
* Per gallon. Coverage based on single coat. Best practice is to apply a sec-ond coat, using a coverage rate of 50%-75% of that of the first coat. Actualcoverage may vary depending on the type, age, condition and porosityof the surface, application method and other local conditions such astemperature and humidity.
STORAGEStore in a cool place and protect from freezing.
VOC Content: <250 g/L
SHELF LIFETwo years when properly stored.
LIMITATIONSDo not expose containers to freezing temperatures and storeinside during cold weather. Test sealing is alwaysrecommended to ensure both the proper physical andaesthetic properties prior to starting a project. Never try toseal wet or damp surfaces. A minimum temperature of 45°F(7°C) must be maintained for a period of 24 hours prior toapplication. Working time is reduced when temperatures are
SB5000 5105
above 90°F (32°C) so it is recommended that sealing takeplace during cooler temperatures. Work shall cease ininclement weather (rain or strong wind).
PRECAUTIONARY INFORMATIONUse adequate ventilation and wear protective clothing.Harmful if swallowed, inhaled or absorbed through the skin.Wash hands thoroughly after handling and keep containersclosed when not in use. Avoid breathing vapor mist andavoid direct contact with skin (see Material Safety DataSheet).
First Aid: For eyes, flush immediately with plenty of water
for at least 15 minutes and seek medical attention. Forskin, wash thoroughly with soap and water. If irritation
persists, see a doctor. If swallowed, do not induce
vomiting. Seek prompt medical attention. (See MaterialSafety Data Sheet)
KEEP OUT OF REACH OF CHILDREN.
WARRANTYManufacturer warrants its products conform to the published
specifications. No other warranties are expressed or
implied, including those of merchantability or fitness or any
purpose not expressly set forth herein. The user must
determine suitability of the products for their particular use.
Manufacturer and any seller’s liability for incidental or
consequential damage hereunder shall not exceed the
purchase price of the product used.
ASSISTANCE & ADDITIONAL INFORMATIONFor sales, specification assistance, technical questions,
Restoration and Maintenance System Guidelines,
detailing, etc., please contact:
3925 Stern Ave. I St. Charles, IL 60174
Email: [email protected] I Fax: 630-762-0607
800-932-3343� I www.sek.us.com
TECHNICAL DATA SHEET
PROTECTPROTECT
S
� CONTRACTOR GRADE FOR RESIDENTIAL AND COMMERCIAL PROJECTS �
SB-5000SB-5000SB-5000SB-1300
Stainblocking Invisible Sealer
MATERIAL SQ�FEET SQ�METER
Pavers & Other Hardscape Surfaces 100 - 200 9.3 - 18.6Concrete 150 - 250 13.9 - 25.2 Retaining Walls 100 - 200 9.3 - 18.6